* [PATCH v2] can: m_can: Move accessing of message ram to after clocks are enabled
@ 2018-07-03 11:17 Faiz Abbas
2018-07-10 11:36 ` Faiz Abbas
2018-07-23 8:07 ` Marc Kleine-Budde
0 siblings, 2 replies; 3+ messages in thread
From: Faiz Abbas @ 2018-07-03 11:17 UTC (permalink / raw)
To: linux-kernel, netdev, linux-can, linux-omap; +Cc: wg, mkl, davem, faiz_abbas
MCAN message ram should only be accessed once clocks are enabled.
Therefore, move the call to parse/init the message ram to after
clocks are enabled.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
Changes in v2:
rebased to latest mainline
drivers/net/can/m_can/m_can.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index ac4c6dc2f8c8..04c48371ab2a 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1644,8 +1644,6 @@ static int m_can_plat_probe(struct platform_device *pdev)
priv->can.clock.freq = clk_get_rate(cclk);
priv->mram_base = mram_addr;
- m_can_of_parse_mram(priv, mram_config_vals);
-
platform_set_drvdata(pdev, dev);
SET_NETDEV_DEV(dev, &pdev->dev);
@@ -1668,6 +1666,8 @@ static int m_can_plat_probe(struct platform_device *pdev)
goto clk_disable;
}
+ m_can_of_parse_mram(priv, mram_config_vals);
+
devm_can_led_init(dev);
of_can_transceiver(dev);
@@ -1715,8 +1715,6 @@ static __maybe_unused int m_can_resume(struct device *dev)
pinctrl_pm_select_default_state(dev);
- m_can_init_ram(priv);
-
priv->can.state = CAN_STATE_ERROR_ACTIVE;
if (netif_running(ndev)) {
@@ -1726,6 +1724,7 @@ static __maybe_unused int m_can_resume(struct device *dev)
if (ret)
return ret;
+ m_can_init_ram(priv);
m_can_start(ndev);
netif_device_attach(ndev);
netif_start_queue(ndev);
--
2.17.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2] can: m_can: Move accessing of message ram to after clocks are enabled
2018-07-03 11:17 [PATCH v2] can: m_can: Move accessing of message ram to after clocks are enabled Faiz Abbas
@ 2018-07-10 11:36 ` Faiz Abbas
2018-07-23 8:07 ` Marc Kleine-Budde
1 sibling, 0 replies; 3+ messages in thread
From: Faiz Abbas @ 2018-07-10 11:36 UTC (permalink / raw)
To: linux-kernel, netdev, linux-can, linux-omap; +Cc: wg, mkl, davem
Hi,
On Tuesday 03 July 2018 04:47 PM, Faiz Abbas wrote:
> MCAN message ram should only be accessed once clocks are enabled.
> Therefore, move the call to parse/init the message ram to after
> clocks are enabled.
>
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
> ---
> Changes in v2:
>
> rebased to latest mainline
>
> drivers/net/can/m_can/m_can.c | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
> index ac4c6dc2f8c8..04c48371ab2a 100644
> --- a/drivers/net/can/m_can/m_can.c
> +++ b/drivers/net/can/m_can/m_can.c
> @@ -1644,8 +1644,6 @@ static int m_can_plat_probe(struct platform_device *pdev)
> priv->can.clock.freq = clk_get_rate(cclk);
> priv->mram_base = mram_addr;
>
> - m_can_of_parse_mram(priv, mram_config_vals);
> -
> platform_set_drvdata(pdev, dev);
> SET_NETDEV_DEV(dev, &pdev->dev);
>
> @@ -1668,6 +1666,8 @@ static int m_can_plat_probe(struct platform_device *pdev)
> goto clk_disable;
> }
>
> + m_can_of_parse_mram(priv, mram_config_vals);
> +
> devm_can_led_init(dev);
>
> of_can_transceiver(dev);
> @@ -1715,8 +1715,6 @@ static __maybe_unused int m_can_resume(struct device *dev)
>
> pinctrl_pm_select_default_state(dev);
>
> - m_can_init_ram(priv);
> -
> priv->can.state = CAN_STATE_ERROR_ACTIVE;
>
> if (netif_running(ndev)) {
> @@ -1726,6 +1724,7 @@ static __maybe_unused int m_can_resume(struct device *dev)
> if (ret)
> return ret;
>
> + m_can_init_ram(priv);
> m_can_start(ndev);
> netif_device_attach(ndev);
> netif_start_queue(ndev);
>
Gentle ping.
Thanks,
Faiz
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] can: m_can: Move accessing of message ram to after clocks are enabled
2018-07-03 11:17 [PATCH v2] can: m_can: Move accessing of message ram to after clocks are enabled Faiz Abbas
2018-07-10 11:36 ` Faiz Abbas
@ 2018-07-23 8:07 ` Marc Kleine-Budde
1 sibling, 0 replies; 3+ messages in thread
From: Marc Kleine-Budde @ 2018-07-23 8:07 UTC (permalink / raw)
To: Faiz Abbas, linux-kernel, netdev, linux-can, linux-omap; +Cc: wg, davem
[-- Attachment #1.1: Type: text/plain, Size: 571 bytes --]
On 07/03/2018 01:17 PM, Faiz Abbas wrote:
> MCAN message ram should only be accessed once clocks are enabled.
> Therefore, move the call to parse/init the message ram to after
> clocks are enabled.
>
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
applied to linux-can.
tnx,
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-07-23 9:47 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-03 11:17 [PATCH v2] can: m_can: Move accessing of message ram to after clocks are enabled Faiz Abbas
2018-07-10 11:36 ` Faiz Abbas
2018-07-23 8:07 ` Marc Kleine-Budde
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).