[PATCH v2 0/5] Add 2 rk3588 based boards from Cool Pi

[PATCH v2 0/5] Add 2 rk3588 based boards from Cool Pi

[Andy Yan]

This series add support for rk3588s based SBC Cool Pi 4B
and rk3588 based board Cool Pi CM5 EVB

Changes in v2:
- change board compatible from "CoolPi 4 Model B" to "coolpi,pi-4b" for
  Cool Pi 4B
- change board compatible from "CoolPi CM5 EVB" to "coolpi,pi-cm5-evb"
  for Cool Pi CM5 EVB
- drop ununnecessary property status = "okay" for gpio-led
- drop ununnecessary blank line
- change node name to rtc for hym8563

Andy Yan (5):
  dt-bindings: vendor-prefixes: Add Cool Pi
  dt-bindings: arm: rockchip: Add Cool Pi 4B
  arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B
  dt-bindings: arm: rockchip: Add Cool Pi CM5 EVB
  arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5
    EVB

 .../devicetree/bindings/arm/rockchip.yaml     |  10 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/rockchip/Makefile         |   2 +
 .../dts/rockchip/rk3588-coolpi-cm5-evb.dts    | 887 ++++++++++++++++++
 .../boot/dts/rockchip/rk3588s-coolpi-4b.dts   | 840 +++++++++++++++++
 5 files changed, 1741 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts

-- 
2.34.1

[PATCH v2 1/5] dt-bindings: vendor-prefixes: Add Cool Pi

[Andy Yan]

Add vendor prefix for Cool Pi(https://cool-pi.com/)

Signed-off-by: Andy Yan <andyshrk@163.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

(no changes since v1)

 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 309b94c328c8..ddbba46fcbad 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -294,6 +294,8 @@ patternProperties:
     description: CompuLab Ltd.
   "^congatec,.*":
     description: congatec GmbH
+  "^coolpi,.*":
+    description: cool-pi.com
   "^coreriver,.*":
     description: CORERIVER Semiconductor Co.,Ltd.
   "^corpro,.*":
-- 
2.34.1

[PATCH v2 2/5] dt-bindings: arm: rockchip: Add Cool Pi 4B

[Andy Yan]

Add Cool Pi 4B, a SBC powered by RK3588S

Signed-off-by: Andy Yan <andyshrk@163.com>

---

Changes in v2:
- change board compatible from "CoolPi 4 Model B" to "coolpi,pi-4b"

 Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 5deb66a5c7d9..11d03035f3db 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -95,6 +95,11 @@ properties:
           - const: chipspark,rayeager-px2
           - const: rockchip,rk3066a
 
+      - description: Cool Pi 4 Model B
+        items:
+          - const: coolpi,pi-4b
+          - const: rockchip,rk3588s
+
       - description: Edgeble Neural Compute Module 2(Neu2) SoM based boards
         items:
           - const: edgeble,neural-compute-module-2-io   # Edgeble Neural Compute Module 2 IO Board
-- 
2.34.1

[PATCH v2 3/5] arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B

[Andy Yan]

CoolPi 4B is a rk3588s based SBC.
Specification:
- Rockchip RK3588S
- LPDDR4 2/4/8/16 GB
- TF scard slot
- eMMC 8/32/64/128 GB module
- Gigabit ethernet drived by PCIE with RTL8111HS
- HDMI Type D out
- Mini DP out
- USB 2.0 Host x 2
- USB 3.0 OTG x 1
- USB 3.0 Host x 1
- WIFI/BT module AIC8800
- 40 pin header

Signed-off-by: Andy Yan <andyshrk@163.com>

---

Changes in v2:
- change board compatible from "CoolPi 4 Model B" to "coolpi,pi-4b"
- drop ununnecessary property status = "okay" for gpio-led
- drop ununnecessary blank line
- drop hdmi dt node to avoid compile error
- change node name to rtc for hym8563

 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3588s-coolpi-4b.dts   | 840 ++++++++++++++++++
 2 files changed, 841 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 41276ca535de..e59682691eb0 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -109,6 +109,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-coolpi-4b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
new file mode 100644
index 000000000000..7c7575544eae
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
@@ -0,0 +1,840 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ * https://cool-pi.com/topic/130/coolpi-4b-product-spec-introduction
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588s.dtsi"
+
+/ {
+	model = "RK3588S CoolPi 4 Model B";
+	compatible = "coolpi,pi-4b", "rockchip,rk3588s";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdio;
+		mmc2 = &sdmmc;
+		serial2 = &uart2;
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		label = "rk3588-es8316";
+
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+
+		dais = <&i2s0_8ch_p0>;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl- = <&gpio_leds>;
+
+		led0: led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usbdcin: vcc5v0-usbdcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usbdcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usbdcin>;
+	};
+
+	avdd0v85_pcie20: avdd0v85-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd0v85_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <850000>;
+		vin-supply = <&vdd_0v85_s0>;
+	};
+
+	avdd1v8_pcie20: avdd1v8-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd1v8_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+
+	vcc3v3_mipi: vcc3v3-mipi-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_mipi";
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_otg";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_u3host_en>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&sdio {
+	max-frequency = <150000000>;
+	no-sd;
+	no-mmc;
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdiom1_pins>,<&wifi_poweren_gpio>;
+	status = "okay";
+};
+
+&sdmmc {
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-name = "avcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-name = "avdd_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-name = "vcc_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-name = "avdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-name = "vdd_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy3_host {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6m3_xfer>;
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+	};
+};
+
+&i2c7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7m0_xfer>;
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+
+};
+
+&pcie2x1l1 {
+	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	status = "disabled";
+};
+
+&pcie2x1l2 {
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	rockchip,skip-scan-in-resume;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtl8111_isolate>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-0 = <&pwm2m1_pins>;
+	status = "okay";
+};
+
+&pwm11 {
+	pinctrl-0 = <&pwm11m1_pins>;
+	status = "disabled";
+};
+
+&pwm13 {
+	status = "okay";
+	pinctrl-names = "active";
+	pinctrl-0 = <&pwm13m2_pins>;
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+//bt
+&uart9 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>;
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rtl8111 {
+		rtl8111_isolate: rtl8111-isolate {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	led {
+		gpio_leds: gpio-leds {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>,
+					<0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>,
+					<4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vcc5v0_u3host_en: vcc5v0-u3host-en {
+			rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wireless-bluetooth {
+		uart9_gpios: uart9-gpios {
+			rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reset_gpio: bt-reset-gpio {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_gpio: bt-wake-gpio {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host_irq: bt-wake-host-irq {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	wireless-wlan {
+		wifi_host_wake_irq: wifi-host-wake-irq {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		wifi_poweren_gpio: wifi-poweren-gpio {
+			rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
-- 
2.34.1

[PATCH v2 4/5] dt-bindings: arm: rockchip: Add Cool Pi CM5 EVB

[Andy Yan]

Add Cool Pi CM5 EVB, a board powered by RK3588

Signed-off-by: Andy Yan <andyshrk@163.com>

---

Changes in v2:
- change board compatible from "CoolPi CM5 EVB" to "coolpi,pi-cm5-evb"

 Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 11d03035f3db..4da83bbd642a 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -95,6 +95,11 @@ properties:
           - const: chipspark,rayeager-px2
           - const: rockchip,rk3066a
 
+      - description: Cool Pi Compute Module 5(CM5) EVB
+        items:
+          - const: coolpi,pi-cm5-evb
+          - const: rockchip,rk3588
+
       - description: Cool Pi 4 Model B
         items:
           - const: coolpi,pi-4b
-- 
2.34.1

[PATCH v2 5/5] arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB

[Andy Yan]

Cool Pi CM5 EVB is a board based on rk3588.

Specification:
- Rockchip RK3588
- LPDDR4 2/4/8/16 GB
- TF scard slot
- eMMC 8/32/64/128 GB module
- Gigabit ethernet x 1 with PHY YT8531
- Gigabit ethernet x 1 drived by PCIE with YT6801S
- HDMI Type A out x 2
- HDMI Type D in x 1
- USB 2.0 Host x 2
- USB 3.0 OTG x 1
- USB 3.0 Host x 1
- PCIE M.2 E Key for Wireless connection
- PCIE M.2 M Key for NVME connection
- 40 pin header

Signed-off-by: Andy Yan <andyshrk@163.com>

---

Changes in v2:
- change board compatible from "CoolPi CM5 EVB" to "coolpi,pi-cm5-evb"

 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../dts/rockchip/rk3588-coolpi-cm5-evb.dts    | 887 ++++++++++++++++++
 2 files changed, 888 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index e59682691eb0..9be8e4830158 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
new file mode 100644
index 000000000000..367a7d25d7cf
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
@@ -0,0 +1,887 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "RK3588 CoolPi CM5 EVB";
+	compatible = "coolpi,pi-cm5-evb", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdio;
+		mmc2 = &sdmmc;
+		serial2 = &uart2;
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		label = "rk3588-es8316";
+
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+
+		dais = <&i2s0_8ch_p0>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc12v_dcin>;
+		pwms = <&pwm2 0 25000 0>;
+		enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		status = "okay";
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	leds: leds {
+		status = "okay";
+		compatible = "gpio-leds";
+
+		led: led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_lcd: vcc3v3-lcd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_lcd";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcdpwr_en>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	avdd0v85_pcie20: avdd0v85-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd0v85_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <850000>;
+		vin-supply = <&vdd_0v85_s0>;
+	};
+
+	avdd1v8_pcie20: avdd1v8-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd1v8_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+
+	avdd0v75_pcie30: avdd0v75-pcie30-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd0v75_pcie30";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <750000>;
+		regulator-max-microvolt = <750000>;
+		vin-supply = <&avdd_0v75_s0>;
+	};
+
+	pcie30_avdd1v8: avdd1v8-pcie30-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host1_en>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_otg";
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&typec5v_pwren>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_mipidphy0: vcc-mipi-dphy0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_mipidphy0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vcc5v0_sys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_en>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&sdmmc {
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	pinctrl-names = "default";
+	rx_delay = <0x00>;
+	tx_delay = <0x43>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7m0_xfer>;
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&mdio0 {
+	rgmii_phy: ethernet-phy@1 {
+		/* YT8531C/H */
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&yt8531_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+//ethernet
+&pcie2x1l2 {
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtl8111_isolate>;
+	status = "okay";
+};
+
+//wifi
+&pcie2x1l1 {
+	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron &bt_pwron>;
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+//ssd
+&pcie3x4 {
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+//express
+&pcie3x2 {
+	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	num-cs = <1>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		spi-max-frequency = <1000000>;
+		reg = <0x0>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_2v0_pldo_s3>;
+		vcc14-supply = <&vcc_2v0_pldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "avdd_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m0_xfer>;
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rtl8111 {
+		rtl8111_isolate: rtl8111-isolate {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rtl8211f {
+		yt8531_rst: yt8531-rst {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host1_en: vcc5v0-host1-en {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb-typec {
+		typec5v_pwren: typec5v-pwren {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	hdmi {
+		hdmirx_det: hdmirx-det {
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		pcie_rst: pcie-rst {
+			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+		pcie_clkreq: pcie-clkreq {
+			rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+		pcie_wake: pcie-wake {
+			rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+		wifi_pwron: wifi-pwron {
+			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+		bt_pwron: bt-pwron {
+			rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	lcd {
+		lcdpwr_en: lcdpwr-en {
+			rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+		bl_en: bl-en {
+			rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	cam {
+		cam_en: cam-en {
+			rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+};
-- 
2.34.1

Re: [PATCH v2 2/5] dt-bindings: arm: rockchip: Add Cool Pi 4B

[Krzysztof Kozlowski]

On 10/12/2023 09:04, Andy Yan wrote:
> Add Cool Pi 4B, a SBC powered by RK3588S
> 
> Signed-off-by: Andy Yan <andyshrk@163.com>
> 
> ---

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v2 4/5] dt-bindings: arm: rockchip: Add Cool Pi CM5 EVB

[Krzysztof Kozlowski]

On 10/12/2023 09:06, Andy Yan wrote:
> Add Cool Pi CM5 EVB, a board powered by RK3588
> 
> Signed-off-by: Andy Yan <andyshrk@163.com>
> 
> ---
> 
> Changes in v2:
> - change board compatible from "CoolPi CM5 EVB" to "coolpi,pi-cm5-evb"
> 
>  Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
> index 11d03035f3db..4da83bbd642a 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.yaml
> +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
> @@ -95,6 +95,11 @@ properties:
>            - const: chipspark,rayeager-px2
>            - const: rockchip,rk3066a
>  
> +      - description: Cool Pi Compute Module 5(CM5) EVB
> +        items:
> +          - const: coolpi,pi-cm5-evb

If it is module you are maybe missing here module DTSI and compatible.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v2 5/5] arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB

[Krzysztof Kozlowski]

On 10/12/2023 09:06, Andy Yan wrote:
> Cool Pi CM5 EVB is a board based on rk3588.
> 
> Specification:
> - Rockchip RK3588
> - LPDDR4 2/4/8/16 GB
> - TF scard slot
> - eMMC 8/32/64/128 GB module
> - Gigabit ethernet x 1 with PHY YT8531
> - Gigabit ethernet x 1 drived by PCIE with YT6801S
> - HDMI Type A out x 2
> - HDMI Type D in x 1
> - USB 2.0 Host x 2
> - USB 3.0 OTG x 1
> - USB 3.0 Host x 1
> - PCIE M.2 E Key for Wireless connection
> - PCIE M.2 M Key for NVME connection
> - 40 pin header


> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		power-supply = <&vcc12v_dcin>;
> +		pwms = <&pwm2 0 25000 0>;
> +		enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&bl_en>;
> +		status = "okay";

This is a friendly reminder during the review process.

It seems my or other reviewer's previous comments were not fully
addressed. Maybe the feedback got lost between the quotes, maybe you
just forgot to apply it. Please go back to the previous discussion and
either implement all requested changes or keep discussing them.

Thank you.

Best regards,
Krzysztof

Re: [PATCH v2 3/5] arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B

[Krzysztof Kozlowski]

On 10/12/2023 09:05, Andy Yan wrote:
> CoolPi 4B is a rk3588s based SBC.
> Specification:
> - Rockchip RK3588S
> - LPDDR4 2/4/8/16 GB
> - TF scard slot

...

> +&i2c6 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c6m3_xfer>;
> +	status = "okay";
> +
> +	hym8563: rtc@51 {
> +		compatible = "haoyu,hym8563";
> +		reg = <0x51>;
> +		#clock-cells = <0>;
> +		clock-frequency = <32768>;
> +		clock-output-names = "hym8563";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&hym8563_int>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
> +		status = "okay";

My comments about redundant statues applies to all places, not only to
one specific place...

Best regards,
Krzysztof

Re:Re: [PATCH v2 4/5] dt-bindings: arm: rockchip: Add Cool Pi CM5 EVB

[Andy Yan]

Hi Krzysztof：

At 2023-12-10 19:11:33, "Krzysztof Kozlowski" <krzysztof.kozlowski@linaro.org> wrote:
>On 10/12/2023 09:06, Andy Yan wrote:
>> Add Cool Pi CM5 EVB, a board powered by RK3588
>> 
>> Signed-off-by: Andy Yan <andyshrk@163.com>
>> 
>> ---
>> 
>> Changes in v2:
>> - change board compatible from "CoolPi CM5 EVB" to "coolpi,pi-cm5-evb"
>> 
>>  Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
>>  1 file changed, 5 insertions(+)
>> 
>> diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
>> index 11d03035f3db..4da83bbd642a 100644
>> --- a/Documentation/devicetree/bindings/arm/rockchip.yaml
>> +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
>> @@ -95,6 +95,11 @@ properties:
>>            - const: chipspark,rayeager-px2
>>            - const: rockchip,rk3066a
>>  
>> +      - description: Cool Pi Compute Module 5(CM5) EVB
>> +        items:
>> +          - const: coolpi,pi-cm5-evb
>
>If it is module you are maybe missing here module DTSI and compatible.
>

Yes， it is a core board（CM5） + mother board = CM5 EVB，this is
the  variant I current have， I want to keep the dts as it is now，I will
convert it to a dtsi when I get another variant for this core board（CM5）.

>Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
>Best regards,
>Krzysztof
>
>
>_______________________________________________
>linux-arm-kernel mailing list
>linux-arm-kernel@lists.infradead.org
>http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re:Re: [PATCH v2 3/5] arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B

[Andy Yan]

Hi Krzysztof：

At 2023-12-10 19:13:26, "Krzysztof Kozlowski" <krzysztof.kozlowski@linaro.org> wrote:
>On 10/12/2023 09:05, Andy Yan wrote:
>> CoolPi 4B is a rk3588s based SBC.
>> Specification:
>> - Rockchip RK3588S
>> - LPDDR4 2/4/8/16 GB
>> - TF scard slot
>
>...
>
>> +&i2c6 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&i2c6m3_xfer>;
>> +	status = "okay";
>> +
>> +	hym8563: rtc@51 {
>> +		compatible = "haoyu,hym8563";
>> +		reg = <0x51>;
>> +		#clock-cells = <0>;
>> +		clock-frequency = <32768>;
>> +		clock-output-names = "hym8563";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&hym8563_int>;
>> +		interrupt-parent = <&gpio0>;
>> +		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
>> +		status = "okay";
>
>My comments about redundant statues applies to all places, not only to
>one specific place...

Sorry for that， I will fix in V3

>
>Best regards,
>Krzysztof
>
>
>_______________________________________________
>linux-arm-kernel mailing list
>linux-arm-kernel@lists.infradead.org
>http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re:Re: [PATCH v2 5/5] arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB

[Andy Yan]

Hi Krzysztof：

At 2023-12-10 19:12:15, "Krzysztof Kozlowski" <krzysztof.kozlowski@linaro.org> wrote:
>On 10/12/2023 09:06, Andy Yan wrote:
>> Cool Pi CM5 EVB is a board based on rk3588.
>> 
>> Specification:
>> - Rockchip RK3588
>> - LPDDR4 2/4/8/16 GB
>> - TF scard slot
>> - eMMC 8/32/64/128 GB module
>> - Gigabit ethernet x 1 with PHY YT8531
>> - Gigabit ethernet x 1 drived by PCIE with YT6801S
>> - HDMI Type A out x 2
>> - HDMI Type D in x 1
>> - USB 2.0 Host x 2
>> - USB 3.0 OTG x 1
>> - USB 3.0 Host x 1
>> - PCIE M.2 E Key for Wireless connection
>> - PCIE M.2 M Key for NVME connection
>> - 40 pin header
>
>
>> +
>> +	backlight: backlight {
>> +		compatible = "pwm-backlight";
>> +		power-supply = <&vcc12v_dcin>;
>> +		pwms = <&pwm2 0 25000 0>;
>> +		enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&bl_en>;
>> +		status = "okay";
>
>This is a friendly reminder during the review process.
>
>It seems my or other reviewer's previous comments were not fully
>addressed. Maybe the feedback got lost between the quotes, maybe you
>just forgot to apply it. Please go back to the previous discussion and
>either implement all requested changes or keep discussing them.

Yes， it seems that the comments were lost， I didn't get any comments about PATCH 5 in my V1.
Anyway, I will check this patch again, and fix the issue I find by myself.
>
>Thank you.
>
>Best regards,
>Krzysztof
>
>
>_______________________________________________
>linux-arm-kernel mailing list
>linux-arm-kernel@lists.infradead.org
>http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 5/5] arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB

[Krzysztof Kozlowski]

On 11/12/2023 10:49, Andy Yan wrote:
>>> +
>>> +	backlight: backlight {
>>> +		compatible = "pwm-backlight";
>>> +		power-supply = <&vcc12v_dcin>;
>>> +		pwms = <&pwm2 0 25000 0>;
>>> +		enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
>>> +		pinctrl-names = "default";
>>> +		pinctrl-0 = <&bl_en>;
>>> +		status = "okay";
>>
>> This is a friendly reminder during the review process.
>>
>> It seems my or other reviewer's previous comments were not fully
>> addressed. Maybe the feedback got lost between the quotes, maybe you
>> just forgot to apply it. Please go back to the previous discussion and
>> either implement all requested changes or keep discussing them.
> 
> Yes， it seems that the comments were lost， I didn't get any comments about PATCH 5 in my V1.
> Anyway, I will check this patch again, and fix the issue I find by myself.

I don't have to repeat the same comment for every same thing to fix.
It's your task to fix all occurrences of the same issue.

Best regards,
Krzysztof