From: Nam Cao <namcaov@gmail.com>
To: hdegoede@redhat.com
Cc: Larry.Finger@lwfinger.net, gregkh@linuxfoundation.org,
kbuild-all@lists.01.org, linux-kernel@vger.kernel.org,
linux-staging@lists.linux.dev, lkp@intel.com, namcaov@gmail.com
Subject: [PATCH v3 3/3] staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c
Date: Sat, 20 Aug 2022 20:00:04 +0200 [thread overview]
Message-ID: <6f51a3531ffe60650972bd9f288570db55e3e0ec.1661018051.git.namcaov@gmail.com> (raw)
In-Reply-To: <cover.1661018051.git.namcaov@gmail.com>
because the content of these files is not used.
Signed-off-by: Nam Cao <namcaov@gmail.com>
---
drivers/staging/rtl8723bs/Makefile | 1 -
drivers/staging/rtl8723bs/hal/odm.h | 1 -
.../staging/rtl8723bs/hal/odm_NoiseMonitor.c | 19 -----------
.../staging/rtl8723bs/hal/odm_NoiseMonitor.h | 32 -------------------
drivers/staging/rtl8723bs/hal/odm_precomp.h | 1 -
5 files changed, 54 deletions(-)
delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
delete mode 100644 drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
diff --git a/drivers/staging/rtl8723bs/Makefile b/drivers/staging/rtl8723bs/Makefile
index 159ca1b9016b..bc7ff1dd14f9 100644
--- a/drivers/staging/rtl8723bs/Makefile
+++ b/drivers/staging/rtl8723bs/Makefile
@@ -33,7 +33,6 @@ r8723bs-y = \
hal/odm_DynamicTxPower.o \
hal/odm_EdcaTurboCheck.o \
hal/odm_HWConfig.o \
- hal/odm_NoiseMonitor.o \
hal/odm_RegConfig8723B.o \
hal/rtl8723b_cmd.o \
hal/rtl8723b_dm.o \
diff --git a/drivers/staging/rtl8723bs/hal/odm.h b/drivers/staging/rtl8723bs/hal/odm.h
index 033f22b0f394..fe9782d2d4fd 100644
--- a/drivers/staging/rtl8723bs/hal/odm.h
+++ b/drivers/staging/rtl8723bs/hal/odm.h
@@ -14,7 +14,6 @@
#include "odm_DynamicBBPowerSaving.h"
#include "odm_DynamicTxPower.h"
#include "odm_CfoTracking.h"
-#include "odm_NoiseMonitor.h"
#define TP_MODE 0
#define RSSI_MODE 1
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
deleted file mode 100644
index b85b323cf5bd..000000000000
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- ******************************************************************************/
-
-#include "odm_precomp.h"
-
-/* This function is for inband noise test utility only */
-/* To obtain the inband noise level(dbm), do the following. */
-/* 1. disable DIG and Power Saving */
-/* 2. Set initial gain = 0x1a */
-/* 3. Stop updating idle time pwer report (for driver read) */
-/* - 0x80c[25] */
-
-#define Valid_Min -35
-#define Valid_Max 10
-#define ValidCnt 5
diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
deleted file mode 100644
index 01c5c524d4e0..000000000000
--- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- *****************************************************************************/
-#ifndef __ODMNOISEMONITOR_H__
-#define __ODMNOISEMONITOR_H__
-
-#define ODM_MAX_CHANNEL_NUM 38/* 14+24 */
-struct noise_level {
- /* u8 value_a, value_b; */
- u8 value[MAX_RF_PATH];
- /* s8 sval_a, sval_b; */
- s8 sval[MAX_RF_PATH];
-
- /* s32 noise_a = 0, noise_b = 0, sum_a = 0, sum_b = 0; */
- /* s32 noise[ODM_RF_PATH_MAX]; */
- s32 sum[MAX_RF_PATH];
- /* u8 valid_cnt_a = 0, valid_cnt_b = 0, */
- u8 valid[MAX_RF_PATH];
- u8 valid_cnt[MAX_RF_PATH];
-
-};
-
-
-struct odm_noise_monitor {
- s8 noise[MAX_RF_PATH];
- s16 noise_all;
-};
-
-#endif
diff --git a/drivers/staging/rtl8723bs/hal/odm_precomp.h b/drivers/staging/rtl8723bs/hal/odm_precomp.h
index edce506022a5..2987857a8761 100644
--- a/drivers/staging/rtl8723bs/hal/odm_precomp.h
+++ b/drivers/staging/rtl8723bs/hal/odm_precomp.h
@@ -33,7 +33,6 @@
#include "odm_DynamicBBPowerSaving.h"
#include "odm_DynamicTxPower.h"
#include "odm_CfoTracking.h"
-#include "odm_NoiseMonitor.h"
#include "HalPhyRf.h"
#include "HalPhyRf_8723B.h"/* for IQK, LCK, Power-tracking */
#include "rtl8723b_hal.h"
--
2.25.1
next prev parent reply other threads:[~2022-08-20 18:00 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1661018051.git.namcaov@gmail.com>
2022-08-20 18:00 ` [PATCH v3 1/3] staging: rtl8723bs: remove unused function ODM_InbandNoise_Monitor Nam Cao
2022-08-20 18:44 ` Nam Cao
2022-08-22 8:21 ` Dan Carpenter
2022-08-20 18:00 ` [PATCH v3 2/3] staging: rtl8723bs: remove member noise_level from struct dm_odm_t Nam Cao
2022-08-20 18:00 ` Nam Cao [this message]
2022-08-20 18:00 [PATCH v3 0/3] remove useless files Nam Cao
2022-08-20 18:34 ` [PATCH v3 1/3] staging: rtl8723bs: remove unused function ODM_InbandNoise_Monitor Nam Cao
2022-08-20 18:34 ` [PATCH v3 3/3] staging: rtl8723bs: remove odm_NoiseMonitor.h and odm_NoiseMonitor.c Nam Cao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6f51a3531ffe60650972bd9f288570db55e3e0ec.1661018051.git.namcaov@gmail.com \
--to=namcaov@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=gregkh@linuxfoundation.org \
--cc=hdegoede@redhat.com \
--cc=kbuild-all@lists.01.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=lkp@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).