Re: [PATCH v3 1/3] staging: rtl8723bs: remove unused function ODM_InbandNoise_Monitor

[Nam Cao <namcaov@gmail.com>]

Please ignore these emails. They are detached from the thread for some reason.

On Sat, Aug 20, 2022 at 8:00 PM Nam Cao <namcaov@gmail.com> wrote:
>
> because this function is not used. Also remove function
> odm_InbandNoise_Monitor_NSeries because it is a static function
> which is only called from ODM_InbandNoise_Monitor.
>
> Signed-off-by: Nam Cao <namcaov@gmail.com>
> ---
>  .../staging/rtl8723bs/hal/odm_NoiseMonitor.c  | 111 ------------------
>  .../staging/rtl8723bs/hal/odm_NoiseMonitor.h  |   7 --
>  2 files changed, 118 deletions(-)
>
> diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
> index 392cc8a398f5..b85b323cf5bd 100644
> --- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
> +++ b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.c
> @@ -17,114 +17,3 @@
>  #define Valid_Min                              -35
>  #define Valid_Max                      10
>  #define ValidCnt                               5
> -
> -static s16 odm_InbandNoise_Monitor_NSeries(
> -       struct dm_odm_t *pDM_Odm,
> -       u8 bPauseDIG,
> -       u8 IGIValue,
> -       u32 max_time
> -)
> -{
> -       u32 tmp4b;
> -       u8 max_rf_path = 0, rf_path;
> -       u8 reg_c50, reg_c58, valid_done = 0;
> -       struct noise_level noise_data;
> -       u32 start  = 0;
> -
> -       pDM_Odm->noise_level.noise_all = 0;
> -
> -       max_rf_path = 1;
> -
> -       memset(&noise_data, 0, sizeof(struct noise_level));
> -
> -       /*  */
> -       /*  Step 1. Disable DIG && Set initial gain. */
> -       /*  */
> -
> -       if (bPauseDIG)
> -               odm_PauseDIG(pDM_Odm, ODM_PAUSE_DIG, IGIValue);
> -       /*  */
> -       /*  Step 2. Disable all power save for read registers */
> -       /*  */
> -       /* dcmd_DebugControlPowerSave(padapter, PSDisable); */
> -
> -       /*  */
> -       /*  Step 3. Get noise power level */
> -       /*  */
> -       start = jiffies;
> -       while (1) {
> -
> -               /* Stop updating idle time pwer report (for driver read) */
> -               PHY_SetBBReg(pDM_Odm->Adapter, rFPGA0_TxGainStage, BIT25, 1);
> -
> -               /* Read Noise Floor Report */
> -               tmp4b = PHY_QueryBBReg(pDM_Odm->Adapter, 0x8f8, bMaskDWord);
> -
> -               /* PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XAAGCCore1, bMaskByte0, TestInitialGain); */
> -               /* if (max_rf_path == 2) */
> -               /* PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XBAGCCore1, bMaskByte0, TestInitialGain); */
> -
> -               /* update idle time pwer report per 5us */
> -               PHY_SetBBReg(pDM_Odm->Adapter, rFPGA0_TxGainStage, BIT25, 0);
> -
> -               noise_data.value[RF_PATH_A] = (u8)(tmp4b&0xff);
> -               noise_data.value[RF_PATH_B]  = (u8)((tmp4b&0xff00)>>8);
> -
> -               for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
> -                       noise_data.sval[rf_path] = (s8)noise_data.value[rf_path];
> -                       noise_data.sval[rf_path] /= 2;
> -               }
> -               /* mdelay(10); */
> -               /* msleep(10); */
> -
> -               for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
> -                       if ((noise_data.valid_cnt[rf_path] < ValidCnt) && (noise_data.sval[rf_path] < Valid_Max && noise_data.sval[rf_path] >= Valid_Min)) {
> -                               noise_data.valid_cnt[rf_path]++;
> -                               noise_data.sum[rf_path] += noise_data.sval[rf_path];
> -                               if (noise_data.valid_cnt[rf_path] == ValidCnt) {
> -                                       valid_done++;
> -                               }
> -
> -                       }
> -
> -               }
> -
> -               /* printk("####### valid_done:%d #############\n", valid_done); */
> -               if ((valid_done == max_rf_path) || (jiffies_to_msecs(jiffies - start) > max_time)) {
> -                       for (rf_path = RF_PATH_A; rf_path < max_rf_path; rf_path++) {
> -                               /* printk("%s PATH_%d - sum = %d, valid_cnt = %d\n", __func__, rf_path, noise_data.sum[rf_path], noise_data.valid_cnt[rf_path]); */
> -                               if (noise_data.valid_cnt[rf_path])
> -                                       noise_data.sum[rf_path] /= noise_data.valid_cnt[rf_path];
> -                               else
> -                                       noise_data.sum[rf_path]  = 0;
> -                       }
> -                       break;
> -               }
> -       }
> -       reg_c50 = (s32)PHY_QueryBBReg(pDM_Odm->Adapter, rOFDM0_XAAGCCore1, bMaskByte0);
> -       reg_c50 &= ~BIT7;
> -       pDM_Odm->noise_level.noise[RF_PATH_A] = -110 + reg_c50 + noise_data.sum[RF_PATH_A];
> -       pDM_Odm->noise_level.noise_all += pDM_Odm->noise_level.noise[RF_PATH_A];
> -
> -       if (max_rf_path == 2) {
> -               reg_c58 = (s32)PHY_QueryBBReg(pDM_Odm->Adapter, rOFDM0_XBAGCCore1, bMaskByte0);
> -               reg_c58 &= ~BIT7;
> -               pDM_Odm->noise_level.noise[RF_PATH_B] = -110 + reg_c58 + noise_data.sum[RF_PATH_B];
> -               pDM_Odm->noise_level.noise_all += pDM_Odm->noise_level.noise[RF_PATH_B];
> -       }
> -       pDM_Odm->noise_level.noise_all /= max_rf_path;
> -
> -       /*  */
> -       /*  Step 4. Recover the Dig */
> -       /*  */
> -       if (bPauseDIG)
> -               odm_PauseDIG(pDM_Odm, ODM_RESUME_DIG, IGIValue);
> -
> -       return pDM_Odm->noise_level.noise_all;
> -
> -}
> -
> -s16 ODM_InbandNoise_Monitor(void *pDM_VOID, u8 bPauseDIG, u8 IGIValue, u32 max_time)
> -{
> -       return odm_InbandNoise_Monitor_NSeries(pDM_VOID, bPauseDIG, IGIValue, max_time);
> -}
> diff --git a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
> index ab114543f39c..01c5c524d4e0 100644
> --- a/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
> +++ b/drivers/staging/rtl8723bs/hal/odm_NoiseMonitor.h
> @@ -29,11 +29,4 @@ struct odm_noise_monitor {
>         s16 noise_all;
>  };
>
> -s16 ODM_InbandNoise_Monitor(
> -       void *pDM_VOID,
> -       u8 bPauseDIG,
> -       u8 IGIValue,
> -       u32 max_time
> -);
> -
>  #endif
> --
> 2.25.1
>