linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>,
	Michael Ellerman <mpe@ellerman.id.au>,
	npiggin@gmail.com
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v3 22/41] powerpc/32: Perform normal function call in exception entry
Date: Fri, 12 Mar 2021 12:50:32 +0000 (UTC)	[thread overview]
Message-ID: <73c00f3361ca280ef8fd7814c291bd1f5b6e2081.1615552867.git.christophe.leroy@csgroup.eu> (raw)
In-Reply-To: <cover.1615552866.git.christophe.leroy@csgroup.eu>

Now that the MMU is re-enabled before calling the transfer function,
we don't need anymore that hack with the address of the handler and
the return function sitting just after the 'bl' to the transfer
fonction, that function is retrieving via a read relative to 'lr'.

Do a regular call to the transfer function, then to the handler,
then branch to the return function.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
 arch/powerpc/kernel/entry_32.S   | 14 ++++----------
 arch/powerpc/kernel/head_32.h    |  4 ++--
 arch/powerpc/kernel/head_booke.h |  6 +++---
 3 files changed, 9 insertions(+), 15 deletions(-)

diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index ad1fd33e1126..fb849ef922fb 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -104,7 +104,7 @@ transfer_to_handler:
 #ifdef CONFIG_PPC_BOOK3S_32
 	kuep_lock r11, r12
 #endif
-	b	3f
+	blr
 
 	/* if from kernel, check interrupted DOZE/NAP mode */
 2:
@@ -118,13 +118,7 @@ transfer_to_handler:
 #endif /* CONFIG_PPC_BOOK3S_32 || CONFIG_E500 */
 	.globl transfer_to_handler_cont
 transfer_to_handler_cont:
-3:
-	mflr	r9
-	lwz	r11,0(r9)		/* virtual address of handler */
-	lwz	r9,4(r9)		/* where to go when done */
-	mtctr	r11
-	mtlr	r9
-	bctr				/* jump to handler */
+	blr
 
 #if defined (CONFIG_PPC_BOOK3S_32) || defined(CONFIG_E500)
 4:	rlwinm	r12,r12,0,~_TLF_NAPPING
@@ -404,8 +398,8 @@ fee_restarts:
 	stw	r10,_TRAP(r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	transfer_to_handler_full
-	.long	unrecoverable_exception
-	.long	ret_from_except
+	bl	unrecoverable_exception
+	b	ret_from_except
 #endif
 
 	.globl	ret_from_except_full
diff --git a/arch/powerpc/kernel/head_32.h b/arch/powerpc/kernel/head_32.h
index 160ebd573c37..e09585b88ba7 100644
--- a/arch/powerpc/kernel/head_32.h
+++ b/arch/powerpc/kernel/head_32.h
@@ -190,8 +190,8 @@ _ASM_NOKPROBE_SYMBOL(\name\()_virt)
 	li	r10,trap;					\
 	stw	r10,_TRAP(r11);					\
 	bl	tfer;						\
-	.long	hdlr;						\
-	.long	ret
+	bl	hdlr;						\
+	b	ret
 
 #define EXC_XFER_STD(n, hdlr)		\
 	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, transfer_to_handler_full,	\
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index a127d5e7efb4..3707f49f0b78 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -322,9 +322,9 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_EMB_HV)
 #define EXC_XFER_TEMPLATE(hdlr, trap, msr, tfer, ret)	\
 	li	r10,trap;					\
 	stw	r10,_TRAP(r11);					\
-	bl	tfer;		 				\
-	.long	hdlr;						\
-	.long	ret
+	bl	tfer;						\
+	bl	hdlr;						\
+	b	ret;						\
 
 #define EXC_XFER_STD(n, hdlr)		\
 	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, transfer_to_handler_full, \
-- 
2.25.0


  parent reply	other threads:[~2021-03-12 12:51 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-12 12:50 [PATCH v3 00/41] powerpc/32: Switch to interrupt entry/exit in C Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 01/41] powerpc/traps: Declare unrecoverable_exception() as __noreturn Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 02/41] powerpc/40x: Don't use SPRN_SPRG_SCRATCH0/1 in TLB miss handlers Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 03/41] powerpc/40x: Change CRITICAL_EXCEPTION_PROLOG macro to a gas macro Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 04/41] powerpc/40x: Save SRR0/SRR1 and r10/r11 earlier in critical exception Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 05/41] powerpc/40x: Reorder a few instructions in critical exception prolog Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 06/41] powerpc/40x: Prepare for enabling MMU " Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 07/41] powerpc/40x: Prepare normal exception handler for enabling MMU early Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 08/41] powerpc/32: Reconcile interrupts in C Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 09/41] powerpc/32: Entry cpu time accounting " Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 10/41] powerpc/32: Handle bookE debugging in C in exception entry Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 11/41] powerpc/32: Use fast instruction to set MSR RI in exception prolog on 8xx Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 12/41] powerpc/32: Remove ksp_limit Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 13/41] powerpc/32: Always enable data translation in exception prolog Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 14/41] powerpc/32: Tag DAR in EXCEPTION_PROLOG_2 for the 8xx Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 15/41] powerpc/32: Enable instruction translation at the same time as data translation Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 16/41] powerpc/32: Statically initialise first emergency context Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 17/41] powerpc/32: Add vmap_stack_overflow label inside the macro Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 18/41] powerpc/32: Use START_EXCEPTION() as much as possible Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 19/41] powerpc/32: Move exception prolog code into .text once MMU is back on Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 20/41] powerpc/32: Provide a name to exception prolog continuation in virtual mode Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 21/41] powerpc/32: Refactor booke critical registers saving Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy [this message]
2021-03-12 12:50 ` [PATCH v3 23/41] powerpc/32: Always save non volatile registers on exception entry Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 24/41] powerpc/32: Replace ASM exception exit by C exception exit from ppc64 Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 25/41] powerpc/32: Don't save thread.regs on interrupt entry Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 26/41] powerpc/32: Set regs parameter in r3 in transfer_to_handler Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 27/41] powerpc/32: Call bad_page_fault() from do_page_fault() Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 28/41] powerpc/32: Save trap number on stack in exception prolog Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 29/41] powerpc/32: Add a prepare_transfer_to_handler macro for exception prologs Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 30/41] powerpc/32: Only restore non volatile registers when required Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 31/41] powerpc/32: Dismantle EXC_XFER_STD/LITE/TEMPLATE Christophe Leroy
2021-07-31 10:12   ` Finn Thain
2021-07-31 15:39     ` Christophe Leroy
2021-08-01  1:21       ` Finn Thain
     [not found]         ` <34e52975-4ab9-4eb4-3501-02376e38a27c@yahoo.com>
2021-08-01 23:48           ` Finn Thain
2021-08-02 15:19         ` LEROY Christophe
2021-08-03  0:43           ` Finn Thain
     [not found]           ` <62d36dbb-4b39-f5bd-7962-4dcfbea729b3@linux-m68k.org>
     [not found]             ` <683c8156-97b0-5ba7-ce31-2e8613089836@yahoo.com>
2021-08-04  4:57               ` Finn Thain
2021-07-31 16:40     ` Christophe Leroy
2021-08-01  1:39       ` Finn Thain
2021-03-12 12:50 ` [PATCH v3 32/41] powerpc/32: Remove the xfer parameter in EXCEPTION() macro Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 33/41] powerpc/32: Refactor saving of volatile registers in exception prologs Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 34/41] powerpc/32: Save remaining registers in exception prolog Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 35/41] powerpc/32: Return directly from power_save_ppc32_restore() Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 36/41] powerpc/32: Only use prepare_transfer_to_handler function on book3s/32 and e500 Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 37/41] powerpc/32s: Move KUEP locking/unlocking in C Christophe Leroy
2021-03-27 17:24   ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 38/41] powerpc/64s: Make kuap_check_amr() and kuap_get_and_check_amr() generic Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 39/41] powerpc/32s: Create C version of kuap save/restore/check helpers Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 40/41] powerpc/8xx: " Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 41/41] powerpc/32: Manage KUAP in C Christophe Leroy
2021-03-31  1:09 ` [PATCH v3 00/41] powerpc/32: Switch to interrupt entry/exit " Michael Ellerman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=73c00f3361ca280ef8fd7814c291bd1f5b6e2081.1615552867.git.christophe.leroy@csgroup.eu \
    --to=christophe.leroy@csgroup.eu \
    --cc=benh@kernel.crashing.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=npiggin@gmail.com \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).