From: Alexandre Torgue <alexandre.torgue@st.com>
To: Ludovic Barre <ludovic.Barre@st.com>,
Thomas Gleixner <tglx@linutronix.de>,
Jason Cooper <jason@lakedaemon.net>,
Marc Zyngier <marc.zyngier@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 8/8] ARM: dts: stm32: add support of exti on stm32h743 pinctrl
Date: Fri, 7 Jul 2017 10:16:52 +0200 [thread overview]
Message-ID: <743facf9-6c85-fa38-280f-86e477f0f6ce@st.com> (raw)
In-Reply-To: <1499412391-25480-9-git-send-email-ludovic.Barre@st.com>
Hi Ludovic
On 07/07/2017 09:26 AM, Ludovic Barre wrote:
> From: Ludovic Barre <ludovic.barre@st.com>
>
> Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
> ---
Can you fill commit message please
> arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
> index fcc1e06..8854d26 100644
> --- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
> @@ -49,6 +49,8 @@
> #size-cells = <1>;
> compatible = "st,stm32h743-pinctrl";
> ranges = <0 0x58020000 0x3000>;
> + interrupt-parent = <&exti>;
> + st,syscfg = <&syscfg 0x8>;
> pins-are-numbered;
>
> gpioa: gpio@58020000 {
> @@ -57,6 +59,8 @@
> reg = <0x0 0x400>;
> clocks = <&timer_clk>;
> st,bank-name = "GPIOA";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> gpiob: gpio@58020400 {
> @@ -65,6 +69,8 @@
> reg = <0x400 0x400>;
> clocks = <&timer_clk>;
> st,bank-name = "GPIOB";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> gpioc: gpio@58020800 {
> @@ -73,6 +79,8 @@
> reg = <0x800 0x400>;
> clocks = <&timer_clk>;
> st,bank-name = "GPIOC";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> gpiod: gpio@58020c00 {
> @@ -81,6 +89,8 @@
> reg = <0xc00 0x400>;
> clocks = <&timer_clk>;
> st,bank-name = "GPIOD";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> gpioe: gpio@58021000 {
> @@ -89,6 +99,8 @@
> reg = <0x1000 0x400>;
> clocks = <&timer_clk>;
> st,bank-name = "GPIOE";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> gpiof: gpio@58021400 {
> @@ -97,6 +109,8 @@
> reg = <0x1400 0x400>;
> clocks = <&timer_clk>;
> st,bank-name = "GPIOF";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> gpiog: gpio@58021800 {
> @@ -105,6 +119,8 @@
> reg = <0x1800 0x400>;
> clocks = <&timer_clk>;
> st,bank-name = "GPIOG";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> gpioh: gpio@58021c00 {
> @@ -113,6 +129,8 @@
> reg = <0x1c00 0x400>;
> clocks = <&timer_clk>;
> st,bank-name = "GPIOH";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> gpioi: gpio@58022000 {
> @@ -121,6 +139,8 @@
> reg = <0x2000 0x400>;
> clocks = <&timer_clk>;
> st,bank-name = "GPIOI";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> gpioj: gpio@58022400 {
> @@ -129,6 +149,8 @@
> reg = <0x2400 0x400>;
> clocks = <&timer_clk>;
> st,bank-name = "GPIOJ";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> gpiok: gpio@58022800 {
> @@ -137,6 +159,8 @@
> reg = <0x2800 0x400>;
> clocks = <&timer_clk>;
> st,bank-name = "GPIOK";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> usart1_pins: usart1@0 {
>
prev parent reply other threads:[~2017-07-07 8:18 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-07 7:26 [PATCH 0/8] irqchip: stm32: add stm32h7 support Ludovic Barre
2017-07-07 7:26 ` [PATCH 1/8] irqchip: stm32: select GENERIC_IRQ_CHIP Ludovic Barre
2017-07-07 7:26 ` [PATCH 2/8] irqchip: stm32: add multi-bank management Ludovic Barre
2017-08-07 13:21 ` Marc Zyngier
2017-08-08 9:28 ` Ludovic BARRE
2017-07-07 7:26 ` [PATCH 3/8] dt-bindings: interrupt-controllers: add compatible string for stm32h7 Ludovic Barre
2017-07-07 7:26 ` [PATCH 4/8] irqchip: stm32: add stm32h7 support Ludovic Barre
2017-07-07 7:26 ` [PATCH 5/8] irqchip: stm32: fix initial values Ludovic Barre
2017-07-07 7:26 ` [PATCH 6/8] irqchip: stm32: move the wakeup on interrupt mask Ludovic Barre
2017-07-07 7:26 ` [PATCH 7/8] ARM: dts: stm32: add exti support for stm32h743 Ludovic Barre
2017-07-07 7:26 ` [PATCH 8/8] ARM: dts: stm32: add support of exti on stm32h743 pinctrl Ludovic Barre
2017-07-07 8:16 ` Alexandre Torgue [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=743facf9-6c85-fa38-280f-86e477f0f6ce@st.com \
--to=alexandre.torgue@st.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.Barre@st.com \
--cc=marc.zyngier@arm.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).