* [PATCH v4 0/5] Add Mediatek ISP3.0
@ 2024-01-10 14:14 Julien Stephan
2024-01-10 14:14 ` [PATCH v4 1/5] dt-bindings: media: add mediatek ISP3.0 sensor interface Julien Stephan
` (5 more replies)
0 siblings, 6 replies; 28+ messages in thread
From: Julien Stephan @ 2024-01-10 14:14 UTC (permalink / raw)
Cc: Julien Stephan, Andy Hsieh, AngeloGioacchino Del Regno,
Conor Dooley, devicetree, Florian Sylvestre, Krzysztof Kozlowski,
Laurent Pinchart, linux-arm-kernel, linux-kernel, linux-mediatek,
linux-media, Louis Kuo, Matthias Brugger, Mauro Carvalho Chehab,
Paul Elder, Phi-bang Nguyen, Rob Herring
This series adds the support of the Mediatek ISP3.0 found on some
Mediatek SoCs such as the mt8365. The driver is divided into 2 parts:
* SENINF: the sensor interface
* CAMSV: this driver provides a path to bypass the SoC ISP so that image
data coming from the SENINF can go directly into memory without any
image processing. This allows the use of an external ISP or camera
sensor directly.
The SENINF driver is based on previous work done by Louis Kuo available
as an RFC here: https://lore.kernel.org/all/20200708104023.3225-1-louis.kuo@mediatek.com/
This series depends on the following series for the phy [1]
Changes in v4:
- fix suspend/resume deadlock
- fix various locking issues reported by Laurent Pinchart on v3
- run LOCKDEP
- add missing include reported by kernel-test-robot for non mediatek arch and COMPILE_TEST=y
- use atomic poll inside mtk_camsv30_setup
- drop second lane support as it was not used
- remove useless members in structs
- fix media entity initialization
- initialize correct pad for camsv video device
- add isp support in mt8365.dtsi
- rebase on 6.7
Changes in v3:
- fix a lot of formatting issues/coding style issues found in camsv/seninf reported by Angelo on v2
- fix camsv/seninf binding file error reported by Rob
Changes in v2:
- renamed clock `cam_seninf` to `camsys`
- renamed clock `top_mux_seninf` to `top_mux`
- moved phy properties from port nodes to top level
- remove patternProperties
- specify power management dependency in the cover letter description to fix
missing include in dt-binding example
- change '$ref' properties on some endpoint nodes from
'$ref: video-interfaces.yaml#' to '$ref: /schemas/graph.yaml#/$defs/endpoint-base'
where applicable
Best
Julien Stephan
[1] : https://lore.kernel.org/all/20230620121928.1231745-1-jstephan@baylibre.com/
Louis Kuo (2):
dt-bindings: media: add mediatek ISP3.0 sensor interface
media: platform: mediatek: isp_30: add mediatek ISP3.0 sensor
interface
Phi-bang Nguyen (2):
dt-bindings: media: add mediatek ISP3.0 camsv
media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv
.../bindings/media/mediatek,mt8365-camsv.yaml | 109 ++
.../media/mediatek,mt8365-seninf.yaml | 259 +++
MAINTAINERS | 10 +
arch/arm64/boot/dts/mediatek/mt8365.dtsi | 128 ++
drivers/media/platform/mediatek/Kconfig | 1 +
drivers/media/platform/mediatek/Makefile | 1 +
drivers/media/platform/mediatek/isp/Kconfig | 2 +
drivers/media/platform/mediatek/isp/Makefile | 3 +
.../platform/mediatek/isp/isp_30/Kconfig | 35 +
.../platform/mediatek/isp/isp_30/Makefile | 4 +
.../mediatek/isp/isp_30/camsv/Makefile | 7 +
.../mediatek/isp/isp_30/camsv/mtk_camsv.c | 328 ++++
.../mediatek/isp/isp_30/camsv/mtk_camsv.h | 199 +++
.../isp/isp_30/camsv/mtk_camsv30_hw.c | 427 +++++
.../isp/isp_30/camsv/mtk_camsv30_regs.h | 60 +
.../isp/isp_30/camsv/mtk_camsv_video.c | 774 +++++++++
.../mediatek/isp/isp_30/seninf/Makefile | 5 +
.../mediatek/isp/isp_30/seninf/mtk_seninf.c | 1488 +++++++++++++++++
.../isp/isp_30/seninf/mtk_seninf_reg.h | 112 ++
19 files changed, 3952 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
create mode 100644 drivers/media/platform/mediatek/isp/Kconfig
create mode 100644 drivers/media/platform/mediatek/isp/Makefile
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/Kconfig
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/Makefile
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/Makefile
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.c
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.h
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_hw.c
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_regs.h
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv_video.c
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h
--
2.43.0
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH v4 1/5] dt-bindings: media: add mediatek ISP3.0 sensor interface
2024-01-10 14:14 [PATCH v4 0/5] Add Mediatek ISP3.0 Julien Stephan
@ 2024-01-10 14:14 ` Julien Stephan
2024-01-11 8:15 ` Laurent Pinchart
2024-01-12 7:32 ` Krzysztof Kozlowski
2024-01-10 14:14 ` [PATCH v4 2/5] dt-bindings: media: add mediatek ISP3.0 camsv Julien Stephan
` (4 subsequent siblings)
5 siblings, 2 replies; 28+ messages in thread
From: Julien Stephan @ 2024-01-10 14:14 UTC (permalink / raw)
Cc: Louis Kuo, Phi-Bang Nguyen, Julien Stephan, Laurent Pinchart,
Andy Hsieh, AngeloGioacchino Del Regno, Conor Dooley, devicetree,
Florian Sylvestre, Krzysztof Kozlowski, linux-arm-kernel,
linux-kernel, linux-mediatek, linux-media, Matthias Brugger,
Mauro Carvalho Chehab, Paul Elder, Rob Herring
From: Louis Kuo <louis.kuo@mediatek.com>
This adds the bindings, for the mediatek ISP3.0 SENINF module embedded in
some Mediatek SoC, such as the mt8365
Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
Signed-off-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://lore.kernel.org/r/20230807094940.329165-2-jstephan@baylibre.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
.../media/mediatek,mt8365-seninf.yaml | 259 ++++++++++++++++++
MAINTAINERS | 7 +
2 files changed, 266 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
new file mode 100644
index 000000000000..0a7b7d949df7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
@@ -0,0 +1,259 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 MediaTek, BayLibre
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mt8365-seninf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Sensor Interface 3.0
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ - Julien Stephan <jstephan@baylibre.com>
+ - Andy Hsieh <andy.hsieh@mediatek.com>
+
+description:
+ The ISP3.0 SENINF is the CSI-2 and parallel camera sensor interface found in
+ multiple MediaTek SoCs. It can support up to three physical CSI-2
+ input ports, configured in DPHY (2 or 4 data lanes) or CPHY depending on the soc.
+ On the output side, SENINF can be connected either to CAMSV instance or
+ to the internal ISP. CAMSV is used to bypass the internal ISP processing
+ in order to connect either an external ISP, or a sensor (RAW, YUV).
+
+properties:
+ compatible:
+ const: mediatek,mt8365-seninf
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Seninf camsys clock
+ - description: Seninf top mux clock
+
+ clock-names:
+ items:
+ - const: camsys
+ - const: top_mux
+
+ phys:
+ minItems: 1
+ maxItems: 4
+ description:
+ phandle to the PHYs connected to CSI0/A, CSI1, CSI2 and CSI0B
+
+ phy-names:
+ minItems: 1
+ items:
+ - const: csi0
+ - const: csi1
+ - const: csi2
+ - const: csi0b
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI0 or CSI0A port
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI1 port
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ port@2:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI2 port
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ port@3:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI0B port
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+ data-lanes:
+ minItems: 1
+ maxItems: 2
+
+ port@4:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for cam0
+
+ port@5:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for cam1
+
+ port@6:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for camsv0
+
+ port@7:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for camsv1
+
+ port@8:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for camsv2
+
+ port@9:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for camsv3
+
+ required:
+ - port@0
+ - port@1
+ - port@2
+ - port@3
+ - port@4
+ - port@5
+ - port@6
+ - port@7
+ - port@8
+ - port@9
+
+required:
+ - compatible
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mediatek,mt8365-clk.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/phy/phy.h>
+ #include <dt-bindings/power/mediatek,mt8365-power.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ seninf: seninf@15040000 {
+ compatible = "mediatek,mt8365-seninf";
+ reg = <0 0x15040000 0 0x6000>;
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&camsys CLK_CAM_SENIF>,
+ <&topckgen CLK_TOP_SENIF_SEL>;
+ clock-names = "camsys", "top_mux";
+
+ power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
+
+ phys = <&mipi_csi0 PHY_TYPE_DPHY>;
+ phy-names = "csi0";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ seninf_in1: endpoint {
+ clock-lanes = <2>;
+ data-lanes = <1 3 0 4>;
+ remote-endpoint = <&isp1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ seninf_camsv1_endpoint: endpoint {
+ remote-endpoint = <&camsv1_endpoint>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ };
+
+ port@6 {
+ reg = <6>;
+ };
+
+ port@7 {
+ reg = <7>;
+ };
+
+ port@8 {
+ reg = <8>;
+ };
+
+ port@9 {
+ reg = <9>;
+ };
+
+ };
+ };
+ };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 41e0862cfa7d..4444e719cf8e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13611,6 +13611,13 @@ M: Sean Wang <sean.wang@mediatek.com>
S: Maintained
F: drivers/char/hw_random/mtk-rng.c
+MEDIATEK ISP3.0 DRIVER
+M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+M: Julien Stephan <jstephan@baylibre.com>
+M: Andy Hsieh <andy.hsieh@mediatek.com>
+S: Supported
+F: Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
+
MEDIATEK SMI DRIVER
M: Yong Wu <yong.wu@mediatek.com>
L: linux-mediatek@lists.infradead.org (moderated for non-subscribers)
--
2.43.0
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v4 2/5] dt-bindings: media: add mediatek ISP3.0 camsv
2024-01-10 14:14 [PATCH v4 0/5] Add Mediatek ISP3.0 Julien Stephan
2024-01-10 14:14 ` [PATCH v4 1/5] dt-bindings: media: add mediatek ISP3.0 sensor interface Julien Stephan
@ 2024-01-10 14:14 ` Julien Stephan
2024-01-12 7:34 ` Krzysztof Kozlowski
2024-01-10 14:14 ` [PATCH v4 3/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 sensor interface Julien Stephan
` (3 subsequent siblings)
5 siblings, 1 reply; 28+ messages in thread
From: Julien Stephan @ 2024-01-10 14:14 UTC (permalink / raw)
Cc: Phi-bang Nguyen, Julien Stephan, Andy Hsieh,
AngeloGioacchino Del Regno, Conor Dooley, devicetree,
Florian Sylvestre, Krzysztof Kozlowski, Laurent Pinchart,
linux-arm-kernel, linux-kernel, linux-mediatek, linux-media,
Louis Kuo, Matthias Brugger, Mauro Carvalho Chehab, Paul Elder,
Rob Herring
From: Phi-bang Nguyen <pnguyen@baylibre.com>
This adds the bindings, for the ISP3.0 camsv module embedded in
some Mediatek SoC, such as the mt8365
Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://lore.kernel.org/r/20230807094940.329165-4-jstephan@baylibre.com
---
.../bindings/media/mediatek,mt8365-camsv.yaml | 109 ++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 110 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
new file mode 100644
index 000000000000..097b1ab6bc72
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 MediaTek, BayLibre
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mt8365-camsv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek CAMSV 3.0
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ - Julien Stephan <jstephan@baylibre.com>
+ - Andy Hsieh <andy.hsieh@mediatek.com>
+
+description:
+ The CAMSV is a set of DMA engines connected to the SENINF CSI-2
+ receivers. The number of CAMSVs depend on the SoC model.
+
+properties:
+ compatible:
+ const: mediatek,mt8365-camsv
+
+ reg:
+ items:
+ - description: camsv base
+ - description: img0 base
+ - description: tg base
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: cam clock
+ - description: camtg clock
+ - description: camsv clock
+
+ clock-names:
+ items:
+ - const: cam
+ - const: camtg
+ - const: camsv
+
+ iommus:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: connection point for camsv0
+
+ required:
+ - port@0
+
+required:
+ - compatible
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+ - iommus
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/mediatek,mt8365-clk.h>
+ #include <dt-bindings/memory/mediatek,mt8365-larb-port.h>
+ #include <dt-bindings/power/mediatek,mt8365-power.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ camsv1: camsv@15050000 {
+ compatible = "mediatek,mt8365-camsv";
+ reg = <0 0x15050000 0 0x0040>,
+ <0 0x15050208 0 0x0020>,
+ <0 0x15050400 0 0x0100>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&camsys CLK_CAM>,
+ <&camsys CLK_CAMTG>,
+ <&camsys CLK_CAMSV0>;
+ clock-names = "cam", "camtg", "camsv";
+ iommus = <&iommu M4U_PORT_CAM_IMGO>;
+ power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ camsv1_endpoint: endpoint {
+ remote-endpoint = <&seninf_camsv1_endpoint>;
+ };
+ };
+ };
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 4444e719cf8e..3ea2158864e1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13616,6 +13616,7 @@ M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
M: Julien Stephan <jstephan@baylibre.com>
M: Andy Hsieh <andy.hsieh@mediatek.com>
S: Supported
+F: Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
F: Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
MEDIATEK SMI DRIVER
--
2.43.0
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v4 3/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 sensor interface
2024-01-10 14:14 [PATCH v4 0/5] Add Mediatek ISP3.0 Julien Stephan
2024-01-10 14:14 ` [PATCH v4 1/5] dt-bindings: media: add mediatek ISP3.0 sensor interface Julien Stephan
2024-01-10 14:14 ` [PATCH v4 2/5] dt-bindings: media: add mediatek ISP3.0 camsv Julien Stephan
@ 2024-01-10 14:14 ` Julien Stephan
2024-01-11 2:46 ` CK Hu (胡俊光)
` (3 more replies)
2024-01-10 14:14 ` [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv Julien Stephan
` (2 subsequent siblings)
5 siblings, 4 replies; 28+ messages in thread
From: Julien Stephan @ 2024-01-10 14:14 UTC (permalink / raw)
Cc: Louis Kuo, Phi-bang Nguyen, Florian Sylvestre, Laurent Pinchart,
Julien Stephan, Andy Hsieh, AngeloGioacchino Del Regno,
Conor Dooley, devicetree, Krzysztof Kozlowski, linux-arm-kernel,
linux-kernel, linux-mediatek, linux-media, Matthias Brugger,
Mauro Carvalho Chehab, Paul Elder, Rob Herring
From: Louis Kuo <louis.kuo@mediatek.com>
This will add the mediatek ISP3.0 seninf (sensor interface) driver found
on several Mediatek SoCs such as the mt8365.
Then seninf module has 4 physical CSI-2 inputs. Depending on the soc they
may not be all connected.
Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Co-developed-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
---
MAINTAINERS | 1 +
drivers/media/platform/mediatek/Kconfig | 1 +
drivers/media/platform/mediatek/Makefile | 1 +
drivers/media/platform/mediatek/isp/Kconfig | 2 +
drivers/media/platform/mediatek/isp/Makefile | 3 +
.../platform/mediatek/isp/isp_30/Kconfig | 16 +
.../platform/mediatek/isp/isp_30/Makefile | 3 +
.../mediatek/isp/isp_30/seninf/Makefile | 5 +
.../mediatek/isp/isp_30/seninf/mtk_seninf.c | 1488 +++++++++++++++++
.../isp/isp_30/seninf/mtk_seninf_reg.h | 112 ++
10 files changed, 1632 insertions(+)
create mode 100644 drivers/media/platform/mediatek/isp/Kconfig
create mode 100644 drivers/media/platform/mediatek/isp/Makefile
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/Kconfig
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/Makefile
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 3ea2158864e1..52d200d5e36c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13618,6 +13618,7 @@ M: Andy Hsieh <andy.hsieh@mediatek.com>
S: Supported
F: Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
F: Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
+F: drivers/media/platform/mediatek/isp/isp_30/seninf/*
MEDIATEK SMI DRIVER
M: Yong Wu <yong.wu@mediatek.com>
diff --git a/drivers/media/platform/mediatek/Kconfig b/drivers/media/platform/mediatek/Kconfig
index 84104e2cd024..4e0a5a43f35e 100644
--- a/drivers/media/platform/mediatek/Kconfig
+++ b/drivers/media/platform/mediatek/Kconfig
@@ -7,3 +7,4 @@ source "drivers/media/platform/mediatek/mdp/Kconfig"
source "drivers/media/platform/mediatek/vcodec/Kconfig"
source "drivers/media/platform/mediatek/vpu/Kconfig"
source "drivers/media/platform/mediatek/mdp3/Kconfig"
+source "drivers/media/platform/mediatek/isp/Kconfig"
diff --git a/drivers/media/platform/mediatek/Makefile b/drivers/media/platform/mediatek/Makefile
index 38e6ba917fe5..695f05f525a6 100644
--- a/drivers/media/platform/mediatek/Makefile
+++ b/drivers/media/platform/mediatek/Makefile
@@ -4,3 +4,4 @@ obj-y += mdp/
obj-y += vcodec/
obj-y += vpu/
obj-y += mdp3/
+obj-y += isp/
diff --git a/drivers/media/platform/mediatek/isp/Kconfig b/drivers/media/platform/mediatek/isp/Kconfig
new file mode 100644
index 000000000000..708b9a6660d2
--- /dev/null
+++ b/drivers/media/platform/mediatek/isp/Kconfig
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+source "drivers/media/platform/mediatek/isp/isp_30/Kconfig"
diff --git a/drivers/media/platform/mediatek/isp/Makefile b/drivers/media/platform/mediatek/isp/Makefile
new file mode 100644
index 000000000000..a81ab33d0dd3
--- /dev/null
+++ b/drivers/media/platform/mediatek/isp/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-y += isp_30/
diff --git a/drivers/media/platform/mediatek/isp/isp_30/Kconfig b/drivers/media/platform/mediatek/isp/isp_30/Kconfig
new file mode 100644
index 000000000000..9791312589fb
--- /dev/null
+++ b/drivers/media/platform/mediatek/isp/isp_30/Kconfig
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config MTK_SENINF30
+ tristate "MediaTek ISP3.0 SENINF driver"
+ depends on VIDEO_V4L2_SUBDEV_API
+ depends on MEDIA_CAMERA_SUPPORT
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on OF
+ select V4L2_FWNODE
+ default n
+ help
+ This driver provides a MIPI CSI-2 receiver interface to connect
+ an external camera module with MediaTek ISP3.0. It is able to handle
+ multiple cameras at the same time.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mtk-seninf.
diff --git a/drivers/media/platform/mediatek/isp/isp_30/Makefile b/drivers/media/platform/mediatek/isp/isp_30/Makefile
new file mode 100644
index 000000000000..ac3142de4739
--- /dev/null
+++ b/drivers/media/platform/mediatek/isp/isp_30/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_MTK_SENINF30) += seninf/
diff --git a/drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile b/drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile
new file mode 100644
index 000000000000..f28480d6d6c3
--- /dev/null
+++ b/drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
+mtk-seninf-objs += mtk_seninf.o
+
+obj-$(CONFIG_MTK_SENINF30) += mtk-seninf.o
diff --git a/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c
new file mode 100644
index 000000000000..67b2c697d9ca
--- /dev/null
+++ b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c
@@ -0,0 +1,1488 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 MediaTek Inc.
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_graph.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/videodev2.h>
+#include <media/media-device.h>
+#include <media/media-entity.h>
+#include <media/v4l2-async.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-mc.h>
+#include <media/v4l2-subdev.h>
+
+#include "mtk_seninf_reg.h"
+
+#define SENINF_TIMESTAMP_STEP 0x67
+#define SENINF_SETTLE_DELAY 0x15
+#define SENINF_HS_TRAIL_PARAMETER 0x8
+
+#define SENINF_MAX_NUM_INPUTS 4
+#define SENINF_MAX_NUM_OUTPUTS 6
+#define SENINF_MAX_NUM_MUXES 6
+#define SENINF_MAX_NUM_PADS (SENINF_MAX_NUM_INPUTS + \
+ SENINF_MAX_NUM_OUTPUTS)
+
+#define SENINF_DEFAULT_BUS_FMT MEDIA_BUS_FMT_SGRBG10_1X10
+#define SENINF_DEFAULT_WIDTH 1920
+#define SENINF_DEFAULT_HEIGHT 1080
+
+#define SENINF_PAD_10BIT 0
+
+#define SENINF_TEST_MODEL 0
+#define SENINF_NORMAL_MODEL 1
+#define SENINF_ALL_ERR_IRQ_EN 0x7f
+#define SENINF_IRQ_CLR_SEL 0x80000000
+
+#define SENINF_MIPI_SENSOR 0x8
+
+#define MTK_CSI_MAX_LANES 4
+
+/* Port number in the device tree. */
+enum mtk_seninf_port {
+ CSI_PORT_0 = 0, /* 4D1C or 2D1C */
+ CSI_PORT_1, /* 4D1C */
+ CSI_PORT_2, /* 4D1C */
+ CSI_PORT_0B, /* 2D1C */
+};
+
+enum mtk_seninf_id {
+ SENINF_1 = 0,
+ SENINF_2 = 1,
+ SENINF_3 = 2,
+ SENINF_5 = 4,
+};
+
+static const u32 port_to_seninf_id[] = {
+ [CSI_PORT_0] = SENINF_1,
+ [CSI_PORT_1] = SENINF_3,
+ [CSI_PORT_2] = SENINF_5,
+ [CSI_PORT_0B] = SENINF_2,
+};
+
+enum mtk_seninf_phy_mode {
+ SENINF_PHY_MODE_NONE,
+ SENINF_PHY_MODE_4D1C,
+ SENINF_PHY_MODE_2D1C,
+};
+
+enum mtk_seninf_format_flag {
+ MTK_SENINF_FORMAT_BAYER = BIT(0),
+ MTK_SENINF_FORMAT_DPCM = BIT(1),
+ MTK_SENINF_FORMAT_JPEG = BIT(2),
+ MTK_SENINF_FORMAT_INPUT_ONLY = BIT(3),
+};
+
+/**
+ * struct mtk_seninf_conf - Model-specific SENINF parameters
+ * @model: Model description
+ * @nb_inputs: Number of SENINF inputs
+ * @nb_muxes: Number of SENINF MUX (FIFO) instances
+ * @nb_outputs: Number of outputs (to CAM and CAMSV instances)
+ */
+struct mtk_seninf_conf {
+ const char *model;
+ u8 nb_inputs;
+ u8 nb_muxes;
+ u8 nb_outputs;
+};
+
+/**
+ * struct mtk_seninf_format_info - Information about media bus formats
+ * @code: V4L2 media bus code
+ * @flags: Flags describing the format, as a combination of MTK_SENINF_FORMAT_*
+ */
+struct mtk_seninf_format_info {
+ u32 code;
+ u32 flags;
+};
+
+/**
+ * struct mtk_seninf_input - SENINF input block
+ * @pad: DT port and media entity pad number
+ * @seninf_id: SENINF hardware instance ID
+ * @base: Memory mapped I/O based address
+ * @seninf: Back pointer to the mtk_seninf
+ * @phy: PHY connected to the input
+ * @phy_mode: PHY operation mode (NONE when the input is not connected)
+ * @bus: CSI-2 bus configuration from DT
+ * @source_sd: Source subdev connected to the input
+ */
+struct mtk_seninf_input {
+ enum mtk_seninf_port pad;
+ enum mtk_seninf_id seninf_id;
+ void __iomem *base;
+ struct mtk_seninf *seninf;
+
+ struct phy *phy;
+ enum mtk_seninf_phy_mode phy_mode;
+
+ struct v4l2_mbus_config_mipi_csi2 bus;
+
+ struct v4l2_subdev *source_sd;
+};
+
+/**
+ * struct mtk_seninf_mux - SENINF MUX channel
+ * @pad: DT port and media entity pad number
+ * @mux_id: MUX hardware instance ID
+ * @base: Memory mapped I/O based address
+ * @seninf: Back pointer to the mtk_seninf
+ */
+struct mtk_seninf_mux {
+ unsigned int pad;
+ unsigned int mux_id;
+ void __iomem *base;
+ struct mtk_seninf *seninf;
+};
+
+/**
+ * struct mtk_seninf - Top-level SENINF device
+ * @dev: The (platform) device
+ * @phy: PHYs at the SENINF inputs
+ * @num_clks: Number of clocks in the clks array
+ * @clks: Clocks
+ * @base: Memory mapped I/O base address
+ * @media_dev: Media controller device
+ * @v4l2_dev: V4L2 device
+ * @subdev: V4L2 subdevice
+ * @pads: Media entity pads
+ * @notifier: V4L2 async notifier for source subdevs
+ * @ctrl_handler: V4L2 controls handler
+ * @source_format: Active format on the source pad
+ * @inputs: Array of SENINF inputs
+ * @muxes: Array of MUXes
+ * @conf: Model-specific SENINF parameters
+ * @is_testmode: Whether or not the test pattern generator is enabled
+ */
+struct mtk_seninf {
+ struct device *dev;
+ struct phy *phy[5];
+ unsigned int num_clks;
+ struct clk_bulk_data *clks;
+ void __iomem *base;
+
+ struct media_device media_dev;
+ struct v4l2_device v4l2_dev;
+ struct v4l2_subdev subdev;
+ struct media_pad pads[SENINF_MAX_NUM_PADS];
+ struct v4l2_async_notifier notifier;
+ struct v4l2_ctrl_handler ctrl_handler;
+
+ struct mtk_seninf_input inputs[SENINF_MAX_NUM_INPUTS];
+ struct mtk_seninf_mux muxes[SENINF_MAX_NUM_MUXES];
+
+ const struct mtk_seninf_conf *conf;
+
+ bool is_testmode;
+};
+
+inline struct mtk_seninf *sd_to_mtk_seninf(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct mtk_seninf, subdev);
+}
+
+static inline bool mtk_seninf_pad_is_sink(struct mtk_seninf *priv,
+ unsigned int pad)
+{
+ return pad < priv->conf->nb_inputs;
+}
+
+static inline bool mtk_seninf_pad_is_source(struct mtk_seninf *priv,
+ unsigned int pad)
+{
+ return !mtk_seninf_pad_is_sink(priv, pad);
+}
+
+/* -----------------------------------------------------------------------------
+ * Formats
+ */
+
+static const struct mtk_seninf_format_info mtk_seninf_formats[] = {
+ {
+ .code = MEDIA_BUS_FMT_SBGGR8_1X8,
+ .flags = MTK_SENINF_FORMAT_BAYER,
+ }, {
+ .code = MEDIA_BUS_FMT_SGBRG8_1X8,
+ .flags = MTK_SENINF_FORMAT_BAYER,
+ }, {
+ .code = MEDIA_BUS_FMT_SGRBG8_1X8,
+ .flags = MTK_SENINF_FORMAT_BAYER,
+ }, {
+ .code = MEDIA_BUS_FMT_SRGGB8_1X8,
+ .flags = MTK_SENINF_FORMAT_BAYER,
+ }, {
+ .code = MEDIA_BUS_FMT_SGRBG10_1X10,
+ .flags = MTK_SENINF_FORMAT_BAYER,
+ }, {
+ .code = MEDIA_BUS_FMT_SRGGB10_1X10,
+ .flags = MTK_SENINF_FORMAT_BAYER,
+ }, {
+ .code = MEDIA_BUS_FMT_SBGGR10_1X10,
+ .flags = MTK_SENINF_FORMAT_BAYER,
+ }, {
+ .code = MEDIA_BUS_FMT_SGBRG10_1X10,
+ .flags = MTK_SENINF_FORMAT_BAYER,
+ }, {
+ .code = MEDIA_BUS_FMT_SBGGR12_1X12,
+ .flags = MTK_SENINF_FORMAT_BAYER,
+ }, {
+ .code = MEDIA_BUS_FMT_SGBRG12_1X12,
+ .flags = MTK_SENINF_FORMAT_BAYER,
+ }, {
+ .code = MEDIA_BUS_FMT_SGRBG12_1X12,
+ .flags = MTK_SENINF_FORMAT_BAYER,
+ }, {
+ .code = MEDIA_BUS_FMT_SRGGB12_1X12,
+ .flags = MTK_SENINF_FORMAT_BAYER,
+ }, {
+ .code = MEDIA_BUS_FMT_SBGGR14_1X14,
+ .flags = MTK_SENINF_FORMAT_BAYER,
+ }, {
+ .code = MEDIA_BUS_FMT_SGBRG14_1X14,
+ .flags = MTK_SENINF_FORMAT_BAYER,
+ }, {
+ .code = MEDIA_BUS_FMT_SGRBG14_1X14,
+ .flags = MTK_SENINF_FORMAT_BAYER,
+ }, {
+ .code = MEDIA_BUS_FMT_SRGGB14_1X14,
+ .flags = MTK_SENINF_FORMAT_BAYER,
+ }, {
+ .code = MEDIA_BUS_FMT_SBGGR16_1X16,
+ .flags = MTK_SENINF_FORMAT_BAYER,
+ }, {
+ .code = MEDIA_BUS_FMT_SGBRG16_1X16,
+ .flags = MTK_SENINF_FORMAT_BAYER,
+ }, {
+ .code = MEDIA_BUS_FMT_SGRBG16_1X16,
+ .flags = MTK_SENINF_FORMAT_BAYER,
+ }, {
+ .code = MEDIA_BUS_FMT_SRGGB16_1X16,
+ .flags = MTK_SENINF_FORMAT_BAYER,
+ }, {
+ .code = MEDIA_BUS_FMT_UYVY8_1X16,
+ }, {
+ .code = MEDIA_BUS_FMT_VYUY8_1X16,
+ }, {
+ .code = MEDIA_BUS_FMT_YUYV8_1X16,
+ }, {
+ .code = MEDIA_BUS_FMT_YVYU8_1X16,
+ }, {
+ .code = MEDIA_BUS_FMT_JPEG_1X8,
+ .flags = MTK_SENINF_FORMAT_JPEG,
+ }, {
+ .code = MEDIA_BUS_FMT_S5C_UYVY_JPEG_1X8,
+ .flags = MTK_SENINF_FORMAT_JPEG,
+ },
+ /* Keep the input-only formats last. */
+ {
+ .code = MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8,
+ .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY,
+ }, {
+ .code = MEDIA_BUS_FMT_SRGGB10_DPCM8_1X8,
+ .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY,
+ }, {
+ .code = MEDIA_BUS_FMT_SBGGR10_DPCM8_1X8,
+ .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY,
+ }, {
+ .code = MEDIA_BUS_FMT_SGBRG10_DPCM8_1X8,
+ .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY,
+ }
+};
+
+static const struct mtk_seninf_format_info *mtk_seninf_format_info(u32 code)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(mtk_seninf_formats); ++i) {
+ if (mtk_seninf_formats[i].code == code)
+ return &mtk_seninf_formats[i];
+ }
+
+ return NULL;
+}
+
+static void __mtk_seninf_update(struct mtk_seninf *priv, u32 reg,
+ u32 mask, u32 value)
+{
+ u32 val = readl(priv->base + reg);
+
+ writel((val & ~mask) | (value & mask), priv->base + reg);
+}
+
+#define mtk_seninf_update(priv, reg, field, val) \
+ __mtk_seninf_update(priv, reg, reg##_##field, \
+ FIELD_PREP(reg##_##field, val))
+
+static void __mtk_seninf_input_update(struct mtk_seninf_input *input, u32 reg,
+ u32 mask, u32 value)
+{
+ u32 val = readl(input->base + reg);
+
+ writel((val & ~mask) | (value & mask), input->base + reg);
+}
+
+#define mtk_seninf_input_update(input, reg, field, val) \
+ __mtk_seninf_input_update(input, reg, reg##_##field, \
+ FIELD_PREP(reg##_##field, val))
+
+static u32 mtk_seninf_mux_read(struct mtk_seninf_mux *mux, u32 reg)
+{
+ return readl(mux->base + reg);
+}
+
+static void mtk_seninf_mux_write(struct mtk_seninf_mux *mux, u32 reg,
+ u32 value)
+{
+ writel(value, mux->base + reg);
+}
+
+static void __mtk_seninf_mux_update(struct mtk_seninf_mux *mux, u32 reg,
+ u32 mask, u32 value)
+{
+ u32 val = mtk_seninf_mux_read(mux, reg);
+
+ mtk_seninf_mux_write(mux, reg, (val & ~mask) | (value & mask));
+}
+
+#define mtk_seninf_mux_update(mux, reg, field, val) \
+ __mtk_seninf_mux_update(mux, reg, reg##_##field, \
+ FIELD_PREP(reg##_##field, val))
+
+/* -----------------------------------------------------------------------------
+ * Hardware Configuration
+ *
+ * The SENINF is the camera sensor interface. On the input side it contains
+ * input channels (also named SENINF), each made of a CSI-2 receiver, an
+ * interface for parallel sensors, and a test pattern generator. The inputs are
+ * routed through a N:M crossbar switch (TOP MUX) to VC/DT filters with a FIFO
+ * (MUX). The MUX are routed to another N:M crossbar switch (CAM MUX), whose
+ * output is then connected to other IP cores.
+ *
+ * +-------------------------------------------------------+
+ * | SENINF |
+ * | |
+ * +-------+ | +----------+ TOP MUX |
+ * | | | | SENINF | |\ CAM MUX |
+ * | D-PHY | ---> | CSI-2 RX | ---> | | +------------+ |\ |
+ * | | | | TPG | -> | | ---> | MUX (FIFO) | ---> | | ---> CAMSV
+ * +-------+ | +----------+ -> | | +------------+ -> | | |
+ * | |/ -> | | |
+ * | |/ |
+ * | |
+ * ... | ... ... --->
+ * | |
+ * | |
+ * +-------------------------------------------------------+
+ *
+ * The number of PHYs, SENINF and MUX differ between SoCs. MT8167 has a single
+ * MUX and thus no output CAM MUX crossbar switch.
+ */
+
+static void mtk_seninf_csi2_setup_phy(struct mtk_seninf *priv)
+{
+ /* CSI0 */
+ if (priv->inputs[CSI_PORT_0].phy) {
+ struct mtk_seninf_input *input = &priv->inputs[CSI_PORT_0];
+
+ mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI0,
+ DPHY_MODE, 0 /* 4D1C*/);
+ mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI0,
+ CK_SEL_1, input->bus.clock_lane);
+ mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI0,
+ CK_SEL_2, 2);
+ mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI0,
+ PHY_SENINF_LANE_MUX_CSI0_EN, 1);
+ }
+
+ /* CSI1 */
+ if (priv->inputs[CSI_PORT_1].phy) {
+ struct mtk_seninf_input *input = &priv->inputs[CSI_PORT_1];
+
+ mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI1,
+ DPHY_MODE, 0 /* 4D1C */);
+ mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI1,
+ CK_SEL_1, input->bus.clock_lane);
+ mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI1,
+ PHY_SENINF_LANE_MUX_CSI1_EN, 1);
+ }
+}
+
+static void mtk_seninf_input_setup_csi2_rx(struct mtk_seninf_input *input)
+{
+ unsigned int lanes[MTK_CSI_MAX_LANES] = { };
+ unsigned int i;
+
+ /*
+ * Configure data lane muxing. In 2D1C mode, lanes 0 to 2 correspond to
+ * CSIx[AB]_L{0,1,2}, and in 4D1C lanes 0 to 5 correspond to
+ * CSIxA_L{0,1,2}, CSIxB_L{0,1,2}.
+ *
+ * The clock lane must be skipped when calculating the index of the
+ * physical data lane. For instance, in 4D1C mode, the sensor clock
+ * lane is typically connected to lane 2 (CSIxA_L2), and the sensor
+ * data lanes 0-3 to lanes 1 (CSIxA_L1), 3 (CSIxB_L0), 0 (CSIxA_L0) and
+ * 4 (CSIxB_L1). The when skipping the clock lane, the data lane
+ * indices become 1, 2, 0 and 3.
+ */
+ for (i = 0; i < input->bus.num_data_lanes; ++i) {
+ lanes[i] = input->bus.data_lanes[i];
+ if (lanes[i] > input->bus.clock_lane)
+ lanes[i]--;
+ }
+
+ mtk_seninf_input_update(input, MIPI_RX_CON24_CSI0, CSI0_BIST_LN0_MUX, lanes[0]);
+ mtk_seninf_input_update(input, MIPI_RX_CON24_CSI0, CSI0_BIST_LN1_MUX, lanes[1]);
+ mtk_seninf_input_update(input, MIPI_RX_CON24_CSI0, CSI0_BIST_LN2_MUX, lanes[2]);
+ mtk_seninf_input_update(input, MIPI_RX_CON24_CSI0, CSI0_BIST_LN3_MUX, lanes[3]);
+}
+
+static void mtk_seninf_input_setup_csi2(struct mtk_seninf_input *input,
+ struct v4l2_subdev_state *state)
+{
+ const struct mtk_seninf_format_info *fmtinfo;
+ const struct v4l2_mbus_framefmt *format;
+ unsigned int num_data_lanes = input->bus.num_data_lanes;
+ unsigned int val = 0;
+
+ format = v4l2_subdev_state_get_stream_format(state, input->pad, 0);
+ fmtinfo = mtk_seninf_format_info(format->code);
+
+ /* Configure timestamp */
+ writel(SENINF_TIMESTAMP_STEP, input->base + SENINF_TG1_TM_STP);
+
+ /* HQ */
+ writel(0x0, input->base + SENINF_TG1_PH_CNT);
+ writel(0x10001, input->base + SENINF_TG1_SEN_CK);
+
+ /* First Enable Sensor interface and select pad (0x1a04_0200) */
+ mtk_seninf_input_update(input, SENINF_CTRL, SENINF_EN, 1);
+ mtk_seninf_input_update(input, SENINF_CTRL, PAD2CAM_DATA_SEL, SENINF_PAD_10BIT);
+ mtk_seninf_input_update(input, SENINF_CTRL, SENINF_SRC_SEL, 0);
+ mtk_seninf_input_update(input, SENINF_CTRL_EXT, SENINF_CSI2_IP_EN, 1);
+ mtk_seninf_input_update(input, SENINF_CTRL_EXT, SENINF_NCSI2_IP_EN, 0);
+
+ /* DPCM Enable */
+ if (fmtinfo->flags & MTK_SENINF_FORMAT_DPCM)
+ val = SENINF_CSI2_DPCM_DI_2A_DPCM_EN;
+ else
+ val = SENINF_CSI2_DPCM_DI_30_DPCM_EN;
+ writel(val, input->base + SENINF_CSI2_DPCM);
+
+ /* Settle delay */
+ mtk_seninf_input_update(input, SENINF_CSI2_LNRD_TIMING,
+ DATA_SETTLE_PARAMETER, SENINF_SETTLE_DELAY);
+
+ /* HQ */
+ writel(0x10, input->base + SENINF_CSI2_LNRC_FSM);
+
+ /* CSI2 control */
+ val = readl(input->base + SENINF_CSI2_CTL)
+ | (FIELD_PREP(SENINF_CSI2_CTL_ED_SEL, DATA_HEADER_ORDER_DI_WCL_WCH)
+ | SENINF_CSI2_CTL_CLOCK_LANE_EN | (BIT(num_data_lanes) - 1));
+ writel(val, input->base + SENINF_CSI2_CTL);
+
+ mtk_seninf_input_update(input, SENINF_CSI2_RESYNC_MERGE_CTL,
+ BYPASS_LANE_RESYNC, 0);
+ mtk_seninf_input_update(input, SENINF_CSI2_RESYNC_MERGE_CTL, CDPHY_SEL, 0);
+ mtk_seninf_input_update(input, SENINF_CSI2_RESYNC_MERGE_CTL,
+ CPHY_LANE_RESYNC_CNT, 3);
+ mtk_seninf_input_update(input, SENINF_CSI2_MODE, CSR_CSI2_MODE, 0);
+ mtk_seninf_input_update(input, SENINF_CSI2_MODE, CSR_CSI2_HEADER_LEN, 0);
+ mtk_seninf_input_update(input, SENINF_CSI2_DPHY_SYNC, SYNC_SEQ_MASK_0, 0xff00);
+ mtk_seninf_input_update(input, SENINF_CSI2_DPHY_SYNC, SYNC_SEQ_PAT_0, 0x001d);
+
+ mtk_seninf_input_update(input, SENINF_CSI2_CTL, CLOCK_HS_OPTION, 0);
+ mtk_seninf_input_update(input, SENINF_CSI2_CTL, HSRX_DET_EN, 0);
+ mtk_seninf_input_update(input, SENINF_CSI2_CTL, HS_TRAIL_EN, 1);
+ mtk_seninf_input_update(input, SENINF_CSI2_HS_TRAIL, HS_TRAIL_PARAMETER,
+ SENINF_HS_TRAIL_PARAMETER);
+
+ /* Set debug port to output packet number */
+ mtk_seninf_input_update(input, SENINF_CSI2_DGB_SEL, DEBUG_EN, 1);
+ mtk_seninf_input_update(input, SENINF_CSI2_DGB_SEL, DEBUG_SEL, 0x1a);
+
+ /* HQ */
+ writel(0xfffffffe, input->base + SENINF_CSI2_SPARE0);
+
+ /* Enable CSI2 IRQ mask */
+ /* Turn on all interrupt */
+ writel(0xffffffff, input->base + SENINF_CSI2_INT_EN);
+ /* Write clear CSI2 IRQ */
+ writel(0xffffffff, input->base + SENINF_CSI2_INT_STATUS);
+ /* Enable CSI2 Extend IRQ mask */
+ /* Turn on all interrupt */
+ mtk_seninf_input_update(input, SENINF_CTRL, CSI2_SW_RST, 1);
+ udelay(1);
+ mtk_seninf_input_update(input, SENINF_CTRL, CSI2_SW_RST, 0);
+}
+
+static void mtk_seninf_mux_setup(struct mtk_seninf_mux *mux,
+ struct mtk_seninf_input *input,
+ struct v4l2_subdev_state *state)
+{
+ const struct mtk_seninf_format_info *fmtinfo;
+ const struct v4l2_mbus_framefmt *format;
+ unsigned int pix_sel_ext;
+ unsigned int pix_sel;
+ unsigned int hs_pol = 0;
+ unsigned int vs_pol = 0;
+ unsigned int val;
+ u32 rst_mask;
+
+ format = v4l2_subdev_state_get_stream_format(state, input->pad, 0);
+ fmtinfo = mtk_seninf_format_info(format->code);
+
+ /* Enable mux */
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_MUX_EN, 1);
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_SRC_SEL, SENINF_MIPI_SENSOR);
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT, SENINF_SRC_SEL_EXT, SENINF_NORMAL_MODEL);
+
+ pix_sel_ext = 0;
+ pix_sel = 1;
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT, SENINF_PIX_SEL_EXT, pix_sel_ext);
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_PIX_SEL, pix_sel);
+
+ if (fmtinfo->flags & MTK_SENINF_FORMAT_JPEG) {
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FULL_WR_EN, 0);
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FLUSH_EN,
+ FIFO_FLUSH_EN_JPEG_2_PIXEL_MODE);
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_PUSH_EN,
+ FIFO_PUSH_EN_JPEG_2_PIXEL_MODE);
+ } else {
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FULL_WR_EN, 2);
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FLUSH_EN,
+ FIFO_FLUSH_EN_NORMAL_MODE);
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_PUSH_EN,
+ FIFO_PUSH_EN_NORMAL_MODE);
+ }
+
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_HSYNC_POL, hs_pol);
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_VSYNC_POL, vs_pol);
+
+ val = mtk_seninf_mux_read(mux, SENINF_MUX_CTRL);
+ rst_mask = SENINF_MUX_CTRL_SENINF_IRQ_SW_RST | SENINF_MUX_CTRL_SENINF_MUX_SW_RST;
+
+ mtk_seninf_mux_write(mux, SENINF_MUX_CTRL, val | rst_mask);
+ mtk_seninf_mux_write(mux, SENINF_MUX_CTRL, val & ~rst_mask);
+
+ /* HQ */
+ mtk_seninf_mux_write(mux, SENINF_MUX_SPARE, 0xc2000);
+}
+
+static void mtk_seninf_top_mux_setup(struct mtk_seninf *priv,
+ enum mtk_seninf_id seninf_id,
+ struct mtk_seninf_mux *mux)
+{
+ unsigned int val;
+
+ /*
+ * Use the top mux (from SENINF input to MUX) to configure routing, and
+ * hardcode a 1:1 mapping from the MUX instances to the SENINF outputs.
+ */
+ val = readl(priv->base + SENINF_TOP_MUX_CTRL)
+ & ~(0xf << (mux->mux_id * 4));
+ val |= (seninf_id & 0xf) << (mux->mux_id * 4);
+ writel(val, priv->base + SENINF_TOP_MUX_CTRL);
+
+ writel(0x76541010, priv->base + SENINF_TOP_CAM_MUX_CTRL);
+}
+
+static void seninf_enable_test_pattern(struct mtk_seninf *priv,
+ struct v4l2_subdev_state *state)
+{
+ struct mtk_seninf_input *input = &priv->inputs[CSI_PORT_0];
+ struct mtk_seninf_mux *mux = &priv->muxes[0];
+ const struct mtk_seninf_format_info *fmtinfo;
+ const struct v4l2_mbus_framefmt *format;
+ unsigned int val;
+ unsigned int pix_sel_ext;
+ unsigned int pix_sel;
+ unsigned int hs_pol = 0;
+ unsigned int vs_pol = 0;
+ unsigned int seninf = 0;
+ unsigned int tm_size = 0;
+ unsigned int mux_id = mux->mux_id;
+
+ format = v4l2_subdev_state_get_stream_format(state, priv->conf->nb_inputs, 0);
+ fmtinfo = mtk_seninf_format_info(format->code);
+
+ mtk_seninf_update(priv, SENINF_TOP_CTRL, MUX_LP_MODE, 0);
+
+ mtk_seninf_update(priv, SENINF_TOP_CTRL, SENINF_PCLK_EN, 1);
+ mtk_seninf_update(priv, SENINF_TOP_CTRL, SENINF2_PCLK_EN, 1);
+
+ mtk_seninf_input_update(input, SENINF_CTRL, SENINF_EN, 1);
+ mtk_seninf_input_update(input, SENINF_CTRL, SENINF_SRC_SEL, 1);
+ mtk_seninf_input_update(input, SENINF_CTRL_EXT,
+ SENINF_TESTMDL_IP_EN, 1);
+
+ mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_EN, 1);
+ mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_PAT, 0xc);
+ mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_VSYNC, 4);
+ mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_DUMMYPXL, 0x28);
+
+ if (fmtinfo->flags & MTK_SENINF_FORMAT_BAYER)
+ mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_FMT, 0x0);
+ else
+ mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_FMT, 0x1);
+
+ tm_size = FIELD_PREP(SENINF_TG1_TM_SIZE_TM_LINE, format->height + 8);
+ switch (format->code) {
+ case MEDIA_BUS_FMT_UYVY8_1X16:
+ case MEDIA_BUS_FMT_VYUY8_1X16:
+ case MEDIA_BUS_FMT_YUYV8_1X16:
+ case MEDIA_BUS_FMT_YVYU8_1X16:
+ tm_size |= FIELD_PREP(SENINF_TG1_TM_SIZE_TM_PXL, format->width * 2);
+ break;
+ default:
+ tm_size |= FIELD_PREP(SENINF_TG1_TM_SIZE_TM_PXL, format->width);
+ break;
+ }
+ writel(tm_size, input->base + SENINF_TG1_TM_SIZE);
+
+ writel(TEST_MODEL_CLK_DIVIDED_CNT, input->base + SENINF_TG1_TM_CLK);
+ writel(TIME_STAMP_DIVIDER, input->base + SENINF_TG1_TM_STP);
+
+ /* Set top mux */
+ val = (readl(priv->base + SENINF_TOP_MUX_CTRL) & (~(0xf << (mux_id * 4)))) |
+ ((seninf & 0xf) << (mux_id * 4));
+ writel(val, priv->base + SENINF_TOP_MUX_CTRL);
+
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_MUX_EN, 1);
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT,
+ SENINF_SRC_SEL_EXT, SENINF_TEST_MODEL);
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_SRC_SEL, 1);
+
+ pix_sel_ext = 0;
+ pix_sel = 1;
+
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT,
+ SENINF_PIX_SEL_EXT, pix_sel_ext);
+
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_PIX_SEL, pix_sel);
+
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_PUSH_EN, 0x1f);
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FLUSH_EN, 0x1b);
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FULL_WR_EN, 2);
+
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_HSYNC_POL, hs_pol);
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_VSYNC_POL, vs_pol);
+ mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_HSYNC_MASK, 1);
+
+ mtk_seninf_mux_write(mux, SENINF_MUX_INTEN,
+ SENINF_IRQ_CLR_SEL | SENINF_ALL_ERR_IRQ_EN);
+
+ mtk_seninf_mux_write(mux, SENINF_MUX_CTRL,
+ mtk_seninf_mux_read(mux, SENINF_MUX_CTRL) |
+ SENINF_MUX_CTRL_SENINF_IRQ_SW_RST |
+ SENINF_MUX_CTRL_SENINF_MUX_SW_RST);
+ udelay(1);
+ mtk_seninf_mux_write(mux, SENINF_MUX_CTRL,
+ mtk_seninf_mux_read(mux, SENINF_MUX_CTRL) &
+ ~(SENINF_MUX_CTRL_SENINF_IRQ_SW_RST |
+ SENINF_MUX_CTRL_SENINF_MUX_SW_RST));
+
+ //check this
+ writel(0x76540010, priv->base + SENINF_TOP_CAM_MUX_CTRL);
+
+ dev_dbg(priv->dev, "%s: OK\n", __func__);
+}
+
+static void mtk_seninf_start(struct mtk_seninf *priv,
+ struct v4l2_subdev_state *state,
+ struct mtk_seninf_input *input,
+ struct mtk_seninf_mux *mux)
+{
+ phy_power_on(input->phy);
+
+ mtk_seninf_input_setup_csi2_rx(input);
+ mtk_seninf_input_setup_csi2(input, state);
+
+ mtk_seninf_mux_setup(mux, input, state);
+ mtk_seninf_top_mux_setup(priv, input->seninf_id, mux);
+}
+
+static void mtk_seninf_stop(struct mtk_seninf *priv,
+ struct mtk_seninf_input *input)
+{
+ unsigned int val;
+
+ /* Disable CSI2(2.5G) first */
+ val = readl(input->base + SENINF_CSI2_CTL);
+ val &= ~(SENINF_CSI2_CTL_CLOCK_LANE_EN |
+ SENINF_CSI2_CTL_DATA_LANE3_EN |
+ SENINF_CSI2_CTL_DATA_LANE2_EN |
+ SENINF_CSI2_CTL_DATA_LANE1_EN |
+ SENINF_CSI2_CTL_DATA_LANE0_EN);
+ writel(val, input->base + SENINF_CSI2_CTL);
+
+ if (!priv->is_testmode)
+ phy_power_off(input->phy);
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Controls
+ */
+
+static int seninf_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct mtk_seninf *priv = container_of(ctrl->handler,
+ struct mtk_seninf, ctrl_handler);
+
+ switch (ctrl->id) {
+ case V4L2_CID_TEST_PATTERN:
+ priv->is_testmode = !!ctrl->val;
+ break;
+ }
+
+ return 0;
+}
+
+static const struct v4l2_ctrl_ops seninf_ctrl_ops = {
+ .s_ctrl = seninf_set_ctrl,
+};
+
+static const char *const seninf_test_pattern_menu[] = {
+ "No test pattern",
+ "Static horizontal color bars",
+};
+
+static int seninf_initialize_controls(struct mtk_seninf *priv)
+{
+ struct v4l2_ctrl_handler *handler;
+ int ret;
+
+ handler = &priv->ctrl_handler;
+ ret = v4l2_ctrl_handler_init(handler, 2);
+ if (ret)
+ return ret;
+
+ v4l2_ctrl_new_std_menu_items(handler, &seninf_ctrl_ops,
+ V4L2_CID_TEST_PATTERN,
+ ARRAY_SIZE(seninf_test_pattern_menu) - 1,
+ 0, 0, seninf_test_pattern_menu);
+
+ priv->is_testmode = false;
+
+ if (handler->error) {
+ ret = handler->error;
+ dev_err(priv->dev,
+ "Failed to init controls(%d)\n", ret);
+ v4l2_ctrl_handler_free(handler);
+ return ret;
+ }
+
+ priv->subdev.ctrl_handler = handler;
+
+ return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Subdev Operations
+ */
+static int seninf_s_stream(struct v4l2_subdev *sd, unsigned int source_pad,
+ int on)
+{
+ struct mtk_seninf *priv = sd_to_mtk_seninf(sd);
+ struct v4l2_subdev_state *state;
+ struct mtk_seninf_input *input;
+ struct mtk_seninf_mux *mux;
+ struct v4l2_subdev *source;
+ u32 sink_pad;
+ int ret;
+
+ /* Stream control can only operate on source pads. */
+ if (source_pad < priv->conf->nb_inputs ||
+ source_pad >= priv->conf->nb_inputs + priv->conf->nb_outputs)
+ return -EINVAL;
+
+ /*
+ * Locate the SENINF input and MUX for the source pad.
+ *
+ * Hardcode a 1:1 mapping of MUX instances to SENINF
+ * outputs to match the TOP_CAM_MUX configuration in
+ * mtk_seninf_top_mux_setup().
+ */
+ state = v4l2_subdev_lock_and_get_active_state(&priv->subdev);
+ if (!state)
+ return -EPIPE;
+
+ ret = v4l2_subdev_routing_find_opposite_end(&state->routing, source_pad, 0, &sink_pad,
+ NULL);
+ if (ret) {
+ dev_dbg(priv->dev, "No sink pad routed to source pad %u\n", source_pad);
+ goto unlock;
+ }
+
+ input = &priv->inputs[sink_pad];
+ mux = &priv->muxes[source_pad - priv->conf->nb_inputs];
+
+ if (!on) {
+ if (!priv->is_testmode) {
+ source = input->source_sd;
+ ret = v4l2_subdev_call(source, video, s_stream, 0);
+ if (ret)
+ dev_err(priv->dev,
+ "failed to stop source %s: %d\n",
+ source->entity.name, ret);
+ }
+
+ mtk_seninf_stop(priv, input);
+ pm_runtime_put(priv->dev);
+ goto unlock;
+ }
+
+ ret = pm_runtime_get_sync(priv->dev);
+ if (ret < 0) {
+ dev_err(priv->dev, "Failed to pm_runtime_get_sync: %d\n", ret);
+ pm_runtime_put_noidle(priv->dev);
+ goto unlock;
+ }
+
+ /* If test mode is enabled, just enable the test pattern generator. */
+ if (priv->is_testmode) {
+ seninf_enable_test_pattern(priv, state);
+ ret = 0;
+ goto unlock;
+ }
+
+ /* Start the SENINF first and then the source. */
+ mtk_seninf_start(priv, state, input, mux);
+
+ source = input->source_sd;
+ ret = v4l2_subdev_call(source, video, s_stream, 1);
+ if (ret) {
+ dev_err(priv->dev, "failed to start source %s: %d\n",
+ source->entity.name, ret);
+ mtk_seninf_stop(priv, input);
+ pm_runtime_put(priv->dev);
+ }
+
+unlock:
+ v4l2_subdev_unlock_state(state);
+ return ret;
+};
+
+static int seninf_enable_streams(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state, u32 pad,
+ u64 streams_mask)
+{
+ return seninf_s_stream(sd, pad, 1);
+}
+
+static int seninf_disable_streams(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state, u32 pad,
+ u64 streams_mask)
+{
+ return seninf_s_stream(sd, pad, 0);
+}
+
+static const struct v4l2_mbus_framefmt mtk_seninf_default_fmt = {
+ .code = SENINF_DEFAULT_BUS_FMT,
+ .width = SENINF_DEFAULT_WIDTH,
+ .height = SENINF_DEFAULT_HEIGHT,
+ .field = V4L2_FIELD_NONE,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .xfer_func = V4L2_XFER_FUNC_DEFAULT,
+ .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT,
+ .quantization = V4L2_QUANTIZATION_DEFAULT,
+};
+
+static int __seninf_set_routing(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ struct v4l2_subdev_krouting *routing)
+{
+ int ret;
+
+ ret = v4l2_subdev_routing_validate(sd, routing, V4L2_SUBDEV_ROUTING_ONLY_1_TO_1);
+ if (ret)
+ return ret;
+
+ ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing,
+ &mtk_seninf_default_fmt);
+
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int seninf_init_cfg(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state)
+{
+ struct mtk_seninf *priv = sd_to_mtk_seninf(sd);
+ struct v4l2_subdev_route routes[SENINF_MAX_NUM_OUTPUTS] = { };
+ struct v4l2_subdev_krouting routing = {
+ .routes = routes,
+ };
+ unsigned int i;
+
+ /*
+ * Initialize one route for supported source pads.
+ * It is a single route from the first sink pad to the source pad,
+ * while on SENINF 5.0 the routing table will map sink pads to source
+ * pads connected to CAMSV 1:1 (skipping the first two source pads
+ * connected to the CAM instances).
+ */
+ routing.num_routes = priv->conf->nb_outputs;
+
+ for (i = 0; i < routing.num_routes; i++) {
+ struct v4l2_subdev_route *route = &routes[i];
+
+ route->sink_pad = i;
+ route->sink_stream = 0;
+ route->source_pad = priv->conf->nb_inputs + i;
+ route->source_stream = 0;
+ route->flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE;
+ }
+
+ return __seninf_set_routing(sd, state, &routing);
+}
+
+static int seninf_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ const struct mtk_seninf_format_info *fmtinfo;
+ struct mtk_seninf *priv = sd_to_mtk_seninf(sd);
+
+ if (code->index >= ARRAY_SIZE(mtk_seninf_formats))
+ return -EINVAL;
+
+ fmtinfo = &mtk_seninf_formats[code->index];
+ if (fmtinfo->flags & MTK_SENINF_FORMAT_INPUT_ONLY &&
+ mtk_seninf_pad_is_source(priv, code->pad))
+ return -EINVAL;
+
+ code->code = fmtinfo->code;
+
+ return 0;
+}
+
+static int seninf_set_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ struct v4l2_subdev_format *fmt)
+{
+ struct mtk_seninf *priv = sd_to_mtk_seninf(sd);
+ const struct mtk_seninf_format_info *fmtinfo;
+ struct v4l2_mbus_framefmt *format;
+
+ /*
+ * TODO (?): We should disallow setting formats on the source pad
+ * completely, as the SENINF can't perform any processing. This would
+ * however break usage of the test pattern generator, as there would be
+ * no way to configure formats at all when no active input is selected.
+ */
+
+ /*
+ * Default to the first format if the requested media bus code isn't
+ * supported.
+ */
+ fmtinfo = mtk_seninf_format_info(fmt->format.code);
+ if (!fmtinfo) {
+ fmtinfo = &mtk_seninf_formats[0];
+ fmt->format.code = fmtinfo->code;
+ }
+
+ /* Interlaced formats are not supported yet. */
+ fmt->format.field = V4L2_FIELD_NONE;
+
+ /* Store the format. */
+ format = v4l2_subdev_state_get_stream_format(state, fmt->pad, fmt->stream);
+ if (!format)
+ return -EINVAL;
+
+ *format = fmt->format;
+
+ if (mtk_seninf_pad_is_source(priv, fmt->pad))
+ return 0;
+
+ /* Propagate the format to the corresponding source pad. */
+ format = v4l2_subdev_state_get_opposite_stream_format(state, fmt->pad,
+ fmt->stream);
+ if (!format)
+ return -EINVAL;
+
+ *format = fmt->format;
+
+ return 0;
+}
+
+static int seninf_set_routing(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ enum v4l2_subdev_format_whence which,
+ struct v4l2_subdev_krouting *routing)
+{
+ return __seninf_set_routing(sd, state, routing);
+}
+
+static const struct v4l2_subdev_core_ops seninf_subdev_core_ops = {
+ .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
+ .unsubscribe_event = v4l2_event_subdev_unsubscribe,
+};
+
+static const struct v4l2_subdev_pad_ops seninf_subdev_pad_ops = {
+ .init_cfg = seninf_init_cfg,
+ .enum_mbus_code = seninf_enum_mbus_code,
+ .get_fmt = v4l2_subdev_get_fmt,
+ .set_fmt = seninf_set_fmt,
+ .link_validate = v4l2_subdev_link_validate_default,
+ .set_routing = seninf_set_routing,
+ .enable_streams = seninf_enable_streams,
+ .disable_streams = seninf_disable_streams,
+};
+
+static const struct v4l2_subdev_ops seninf_subdev_ops = {
+ .core = &seninf_subdev_core_ops,
+ .pad = &seninf_subdev_pad_ops,
+};
+
+/* -----------------------------------------------------------------------------
+ * Media Entity Operations
+ */
+
+static const struct media_entity_operations seninf_media_ops = {
+ .get_fwnode_pad = v4l2_subdev_get_fwnode_pad_1_to_1,
+ .link_validate = v4l2_subdev_link_validate,
+};
+
+/* -----------------------------------------------------------------------------
+ * Async Subdev Notifier
+ */
+
+struct mtk_seninf_async_subdev {
+ struct v4l2_async_connection asc;
+ struct mtk_seninf_input *input;
+ unsigned int port;
+};
+
+static int mtk_seninf_fwnode_parse(struct device *dev,
+ unsigned int id)
+
+{
+ static const char * const phy_names[] = { "csi0", "csi1", "csi2", "csi0b"};
+ struct mtk_seninf *priv = dev_get_drvdata(dev);
+ struct fwnode_handle *ep, *fwnode;
+ struct mtk_seninf_input *input;
+ struct mtk_seninf_async_subdev *asd;
+ struct v4l2_fwnode_endpoint vep = {
+ .bus_type = V4L2_MBUS_CSI2_DPHY,
+ };
+ unsigned int port;
+ int ret;
+
+ ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), id, 0, 0);
+ if (!ep)
+ return 0;
+
+ fwnode = fwnode_graph_get_remote_endpoint(ep);
+ ret = v4l2_fwnode_endpoint_parse(ep, &vep);
+ if (ret) {
+ dev_err(dev, "Failed to parse %pOF\n", to_of_node(fwnode));
+ ret = -EINVAL;
+ goto out;
+ }
+
+ asd = v4l2_async_nf_add_fwnode(&priv->notifier, fwnode,
+ struct mtk_seninf_async_subdev);
+ if (IS_ERR(asd)) {
+ ret = PTR_ERR(asd);
+ goto out;
+ }
+
+ port = vep.base.port;
+ asd->port = port;
+
+ if (mtk_seninf_pad_is_source(priv, port)) {
+ ret = 0;
+ goto out;
+ }
+
+ if (vep.bus_type != V4L2_MBUS_CSI2_DPHY) {
+ dev_err(dev, "Only CSI2 bus type is currently supported\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ input = &priv->inputs[port];
+
+ input->pad = port;
+ input->seninf_id = port_to_seninf_id[port];
+ input->base = priv->base + 0x1000 * input->seninf_id;
+ input->seninf = priv;
+
+ input->bus = vep.bus.mipi_csi2;
+
+ input->phy = devm_phy_get(dev, phy_names[port]);
+ if (IS_ERR(input->phy)) {
+ dev_err(dev, "failed to get phy:%ld\n", PTR_ERR(input->phy));
+ ret = PTR_ERR(input->phy);
+ goto out;
+ }
+ input->phy_mode = SENINF_PHY_MODE_4D1C;
+
+ asd->input = input;
+
+ ret = 0;
+out:
+ fwnode_handle_put(ep);
+ fwnode_handle_put(fwnode);
+ return ret;
+}
+
+static int mtk_seninf_notifier_bound(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *sd,
+ struct v4l2_async_connection *asc)
+{
+ struct mtk_seninf *priv = container_of(notifier, struct mtk_seninf, notifier);
+ struct mtk_seninf_async_subdev *asd =
+ container_of(asc, struct mtk_seninf_async_subdev, asc);
+ struct device_link *link;
+ int ret;
+
+ dev_dbg(priv->dev, "%s bound to SENINF port %u\n", sd->entity.name, asd->port);
+
+ if (mtk_seninf_pad_is_sink(priv, asd->port)) {
+ struct mtk_seninf_input *input = asd->input;
+
+ input->source_sd = sd;
+
+ link = device_link_add(priv->dev, sd->dev,
+ DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+ if (!link) {
+ dev_err(priv->dev,
+ "Failed to create device link from source %s\n", sd->name);
+ return -EINVAL;
+ }
+
+ ret = v4l2_create_fwnode_links_to_pad(sd, &priv->pads[input->pad],
+ MEDIA_LNK_FL_IMMUTABLE |
+ MEDIA_LNK_FL_ENABLED);
+ } else {
+ link = device_link_add(sd->dev, priv->dev,
+ DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+ if (!link) {
+ dev_err(priv->dev,
+ "Failed to create device link to output %s\n", sd->name);
+ return -EINVAL;
+ }
+
+ ret = v4l2_create_fwnode_links_to_pad(&priv->subdev,
+ &sd->entity.pads[0],
+ MEDIA_LNK_FL_IMMUTABLE |
+ MEDIA_LNK_FL_ENABLED);
+ }
+ if (ret) {
+ dev_err(priv->dev, "Failed to create links between SENINF port %u and %s (%d)\n",
+ asd->port, sd->entity.name, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mtk_seninf_notifier_complete(struct v4l2_async_notifier *notifier)
+{
+ struct mtk_seninf *priv = container_of(notifier, struct mtk_seninf, notifier);
+ int ret;
+
+ ret = v4l2_device_register_subdev_nodes(&priv->v4l2_dev);
+ if (ret) {
+ dev_err(priv->dev, "Failed to register subdev nodes: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct v4l2_async_notifier_operations mtk_seninf_async_ops = {
+ .bound = mtk_seninf_notifier_bound,
+ .complete = mtk_seninf_notifier_complete,
+};
+
+static int mtk_seninf_media_init(struct mtk_seninf *priv)
+{
+ struct media_device *media_dev = &priv->media_dev;
+ const struct mtk_seninf_conf *conf = priv->conf;
+ u8 num_pads = conf->nb_outputs + conf->nb_inputs;
+ struct media_pad *pads = priv->pads;
+ struct device *dev = priv->dev;
+ unsigned int i;
+ int ret;
+
+ media_dev->dev = dev;
+ strscpy(media_dev->model, conf->model, sizeof(media_dev->model));
+ snprintf(media_dev->bus_info, sizeof(media_dev->bus_info),
+ "platform:%s", dev_name(dev));
+ media_dev->hw_revision = 0;
+ media_device_init(media_dev);
+
+ for (i = 0; i < conf->nb_inputs; i++)
+ pads[i].flags = MEDIA_PAD_FL_SINK;
+ for (i = conf->nb_inputs; i < num_pads; i++)
+ pads[i].flags = MEDIA_PAD_FL_SOURCE;
+
+ ret = media_entity_pads_init(&priv->subdev.entity, num_pads, pads);
+ if (ret) {
+ media_device_cleanup(media_dev);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mtk_seninf_v4l2_async_register(struct mtk_seninf *priv)
+{
+ const struct mtk_seninf_conf *conf = priv->conf;
+ struct device *dev = priv->dev;
+ unsigned int i;
+ int ret;
+
+ v4l2_async_nf_init(&priv->notifier, &priv->v4l2_dev);
+
+ for (i = 0; i < conf->nb_inputs + conf->nb_outputs; ++i) {
+ ret = mtk_seninf_fwnode_parse(dev, i);
+
+ if (ret) {
+ dev_err(dev, "Failed to parse endpoint at port %d, err: %d\n", i, ret);
+ goto err_clean_notififer;
+ }
+ }
+
+ priv->notifier.ops = &mtk_seninf_async_ops;
+ ret = v4l2_async_nf_register(&priv->notifier);
+ if (ret) {
+ dev_err(dev, "Failed to register async notifier: %d\n", ret);
+ goto err_clean_notififer;
+ }
+ return 0;
+
+err_clean_notififer:
+ v4l2_async_nf_cleanup(&priv->notifier);
+
+ return ret;
+}
+
+static int mtk_seninf_v4l2_register(struct mtk_seninf *priv)
+{
+ struct v4l2_subdev *sd = &priv->subdev;
+ struct device *dev = priv->dev;
+ int ret;
+
+ /* Initialize media device & pads. */
+ ret = mtk_seninf_media_init(priv);
+ if (ret)
+ return ret;
+
+ /* Initialize & register v4l2 device. */
+ priv->v4l2_dev.mdev = &priv->media_dev;
+
+ ret = v4l2_device_register(dev, &priv->v4l2_dev);
+ if (ret) {
+ dev_err_probe(dev, ret, "Failed to register V4L2 device: %d\n", ret);
+ goto err_clean_media;
+ }
+
+ /* Initialize & register subdev. */
+ v4l2_subdev_init(sd, &seninf_subdev_ops);
+ sd->dev = dev;
+ sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
+ sd->entity.ops = &seninf_media_ops;
+ sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS
+ | V4L2_SUBDEV_FL_STREAMS;
+ strscpy(sd->name, dev_name(dev), sizeof(sd->name));
+ ret = seninf_initialize_controls(priv);
+ if (ret) {
+ dev_err_probe(dev, ret, "Failed to initialize controls: %d\n", ret);
+ goto err_unreg_v4l2;
+ }
+ v4l2_set_subdevdata(sd, priv);
+
+ ret = v4l2_subdev_init_finalize(sd);
+ if (ret)
+ goto err_free_handler;
+
+ ret = v4l2_device_register_subdev(&priv->v4l2_dev, sd);
+ if (ret) {
+ dev_err_probe(dev, ret, "Failed to register subdev: %d\n", ret);
+ goto err_cleanup_subdev;
+ }
+
+ /* Set up async device */
+ ret = mtk_seninf_v4l2_async_register(priv);
+ if (ret) {
+ dev_err_probe(dev, ret, "Failed to register v4l2 async notifier: %d\n", ret);
+ goto err_unreg_subdev;
+ }
+
+ /* Register media device */
+ ret = media_device_register(&priv->media_dev);
+ if (ret) {
+ dev_err_probe(dev, ret, "failed to register media device: %d\n", ret);
+ goto err_unreg_notifier;
+ }
+
+ return 0;
+
+err_unreg_notifier:
+ v4l2_async_nf_unregister(&priv->notifier);
+err_unreg_subdev:
+ v4l2_device_unregister_subdev(sd);
+err_cleanup_subdev:
+ v4l2_subdev_cleanup(sd);
+err_free_handler:
+ v4l2_ctrl_handler_free(&priv->ctrl_handler);
+err_unreg_v4l2:
+ v4l2_device_unregister(&priv->v4l2_dev);
+err_clean_media:
+ media_entity_cleanup(&sd->entity);
+ media_device_cleanup(&priv->media_dev);
+
+ return ret;
+}
+
+static int seninf_probe(struct platform_device *pdev)
+{
+ /* List of clocks required by seninf. */
+ static const char * const clk_names[] = { "camsys", "top_mux" };
+ struct device *dev = &pdev->dev;
+ struct mtk_seninf *priv;
+ unsigned int i;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(struct mtk_seninf), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->conf = of_device_get_match_data(dev);
+
+ dev_set_drvdata(dev, priv);
+ priv->dev = dev;
+
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ priv->num_clks = ARRAY_SIZE(clk_names);
+ priv->clks = devm_kcalloc(dev, priv->num_clks,
+ sizeof(*priv->clks), GFP_KERNEL);
+ if (!priv->clks)
+ return -ENOMEM;
+
+ for (i = 0; i < priv->num_clks; ++i)
+ priv->clks[i].id = clk_names[i];
+
+ ret = devm_clk_bulk_get(dev, priv->num_clks, priv->clks);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to get seninf clock:%d\n", ret);
+
+ for (i = 0; i < priv->conf->nb_muxes; ++i) {
+ struct mtk_seninf_mux *mux = &priv->muxes[i];
+
+ mux->pad = priv->conf->nb_inputs + i;
+ mux->mux_id = i;
+ mux->base = priv->base + 0x1000 * i;
+ mux->seninf = priv;
+ }
+
+ ret = mtk_seninf_v4l2_register(priv);
+ if (ret)
+ return ret;
+
+ devm_pm_runtime_enable(dev);
+
+ return ret;
+}
+
+static int seninf_pm_suspend(struct device *dev)
+{
+ struct mtk_seninf *priv = dev_get_drvdata(dev);
+
+ dev_dbg(dev, "seninf runtime suspend\n");
+ clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+
+ return 0;
+}
+
+static int seninf_pm_resume(struct device *dev)
+{
+ struct mtk_seninf *priv = dev_get_drvdata(dev);
+ int ret;
+
+ dev_dbg(dev, "seninf runtime resume\n");
+ ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
+ if (ret) {
+ dev_err(dev, "failed to enable clock:%d\n", ret);
+ return ret;
+ }
+
+ mtk_seninf_csi2_setup_phy(priv);
+
+ return 0;
+}
+
+static const struct dev_pm_ops runtime_pm_ops = {
+ SET_RUNTIME_PM_OPS(seninf_pm_suspend, seninf_pm_resume, NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
+};
+
+static int seninf_remove(struct platform_device *pdev)
+{
+ struct mtk_seninf *priv = dev_get_drvdata(&pdev->dev);
+
+ media_device_unregister(&priv->media_dev);
+ media_device_cleanup(&priv->media_dev);
+ v4l2_async_nf_unregister(&priv->notifier);
+ v4l2_async_nf_cleanup(&priv->notifier);
+ v4l2_device_unregister_subdev(&priv->subdev);
+ v4l2_subdev_cleanup(&priv->subdev);
+ v4l2_ctrl_handler_free(&priv->ctrl_handler);
+ media_entity_cleanup(&priv->subdev.entity);
+ v4l2_device_unregister(&priv->v4l2_dev);
+
+ return 0;
+}
+
+static const struct mtk_seninf_conf seninf_8365_conf = {
+ .model = "mtk-camsys-3.0",
+ .nb_inputs = 4,
+ .nb_muxes = 6,
+ .nb_outputs = 4,
+};
+
+static const struct of_device_id mtk_seninf_of_match[] = {
+ { .compatible = "mediatek,mt8365-seninf", .data = &seninf_8365_conf },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mtk_seninf_of_match);
+
+static struct platform_driver seninf_pdrv = {
+ .driver = {
+ .name = "mtk-seninf",
+ .pm = &runtime_pm_ops,
+ .of_match_table = mtk_seninf_of_match,
+ },
+ .probe = seninf_probe,
+ .remove = seninf_remove,
+};
+
+module_platform_driver(seninf_pdrv);
+
+MODULE_DESCRIPTION("MTK sensor interface driver");
+MODULE_AUTHOR("Louis Kuo <louis.kuo@mediatek.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h
new file mode 100644
index 000000000000..768ad5d641be
--- /dev/null
+++ b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h
@@ -0,0 +1,112 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2022 MediaTek Inc.
+ */
+
+#ifndef __SENINF_REG_H__
+#define __SENINF_REG_H__
+
+#include <linux/bits.h>
+
+#define SENINF_TOP_CTRL 0x0000
+#define SENINF_TOP_CTRL_MUX_LP_MODE BIT(31)
+#define SENINF_TOP_CTRL_SENINF_PCLK_EN BIT(10)
+#define SENINF_TOP_CTRL_SENINF2_PCLK_EN BIT(11)
+#define SENINF_TOP_MUX_CTRL 0x0008
+#define SENINF_TOP_CAM_MUX_CTRL 0x0010
+#define SENINF_TOP_PHY_SENINF_CTL_CSI0 0x001c
+#define SENINF_TOP_PHY_SENINF_CTL_CSI0_DPHY_MODE BIT(0)
+#define SENINF_TOP_PHY_SENINF_CTL_CSI0_CK_SEL_1 GENMASK(10, 8)
+#define SENINF_TOP_PHY_SENINF_CTL_CSI0_CK_SEL_2 GENMASK(13, 12)
+#define SENINF_TOP_PHY_SENINF_CTL_CSI0_PHY_SENINF_LANE_MUX_CSI0_EN BIT(31)
+#define SENINF_TOP_PHY_SENINF_CTL_CSI1 0x0020
+#define SENINF_TOP_PHY_SENINF_CTL_CSI1_DPHY_MODE BIT(0)
+#define SENINF_TOP_PHY_SENINF_CTL_CSI1_CK_SEL_1 GENMASK(10, 8)
+#define SENINF_TOP_PHY_SENINF_CTL_CSI1_PHY_SENINF_LANE_MUX_CSI1_EN BIT(31)
+#define SENINF_CTRL 0x0200
+#define SENINF_CTRL_SENINF_EN BIT(0)
+#define SENINF_CTRL_CSI2_SW_RST BIT(7)
+#define SENINF_CTRL_SENINF_SRC_SEL GENMASK(14, 12)
+#define SENINF_CTRL_PAD2CAM_DATA_SEL GENMASK(30, 28)
+#define SENINF_CTRL_EXT 0x0204
+#define SENINF_CTRL_EXT_SENINF_TESTMDL_IP_EN BIT(1)
+#define SENINF_CTRL_EXT_SENINF_NCSI2_IP_EN BIT(5)
+#define SENINF_CTRL_EXT_SENINF_CSI2_IP_EN BIT(6)
+#define SENINF_TG1_PH_CNT 0x0600
+#define SENINF_TG1_SEN_CK 0x0604
+#define SENINF_TG1_TM_CTL 0x0608
+#define SENINF_TG1_TM_CTL_TM_EN BIT(0)
+#define SENINF_TG1_TM_CTL_TM_FMT BIT(2)
+#define SENINF_TG1_TM_CTL_TM_PAT GENMASK(7, 4)
+#define SENINF_TG1_TM_CTL_TM_VSYNC GENMASK(15, 8)
+#define SENINF_TG1_TM_CTL_TM_DUMMYPXL GENMASK(23, 16)
+#define SENINF_TG1_TM_SIZE 0x060c
+#define SENINF_TG1_TM_SIZE_TM_LINE GENMASK(29, 16)
+#define SENINF_TG1_TM_SIZE_TM_PXL GENMASK(12, 0)
+#define SENINF_TG1_TM_CLK 0x0610
+#define TEST_MODEL_CLK_DIVIDED_CNT 8
+#define SENINF_TG1_TM_STP 0x0614
+#define TIME_STAMP_DIVIDER 1
+#define MIPI_RX_CON24_CSI0 0x0824
+#define MIPI_RX_CON24_CSI0_CSI0_BIST_LN0_MUX GENMASK(25, 24)
+#define MIPI_RX_CON24_CSI0_CSI0_BIST_LN1_MUX GENMASK(27, 26)
+#define MIPI_RX_CON24_CSI0_CSI0_BIST_LN2_MUX GENMASK(29, 28)
+#define MIPI_RX_CON24_CSI0_CSI0_BIST_LN3_MUX GENMASK(31, 30)
+#define SENINF_CSI2_CTL 0x0a00
+#define SENINF_CSI2_CTL_DATA_LANE0_EN BIT(0)
+#define SENINF_CSI2_CTL_DATA_LANE1_EN BIT(1)
+#define SENINF_CSI2_CTL_DATA_LANE2_EN BIT(2)
+#define SENINF_CSI2_CTL_DATA_LANE3_EN BIT(3)
+#define SENINF_CSI2_CTL_CLOCK_LANE_EN BIT(4)
+#define SENINF_CSI2_CTL_HSRX_DET_EN BIT(7)
+#define SENINF_CSI2_CTL_ED_SEL BIT(16)
+#define DATA_HEADER_ORDER_DI_WCL_WCH 1
+#define SENINF_CSI2_CTL_HS_TRAIL_EN BIT(25)
+#define SENINF_CSI2_CTL_CLOCK_HS_OPTION BIT(27)
+#define SENINF_CSI2_LNRD_TIMING 0x0a08
+#define SENINF_CSI2_LNRD_TIMING_DATA_SETTLE_PARAMETER GENMASK(15, 8)
+#define SENINF_CSI2_DPCM 0x0a0c
+#define SENINF_CSI2_DPCM_DI_30_DPCM_EN BIT(7)
+#define SENINF_CSI2_DPCM_DI_2A_DPCM_EN BIT(15)
+#define SENINF_CSI2_INT_EN 0x0a10
+#define SENINF_CSI2_INT_STATUS 0x0a14
+#define SENINF_CSI2_DGB_SEL 0x0a18
+#define SENINF_CSI2_DGB_SEL_DEBUG_SEL GENMASK(7, 0)
+#define SENINF_CSI2_DGB_SEL_DEBUG_EN BIT(31)
+#define SENINF_CSI2_SPARE0 0x0a20
+#define SENINF_CSI2_LNRC_FSM 0x0a28
+#define SENINF_CSI2_HS_TRAIL 0x0a40
+#define SENINF_CSI2_HS_TRAIL_HS_TRAIL_PARAMETER GENMASK(7, 0)
+#define SENINF_CSI2_RESYNC_MERGE_CTL 0x0a74
+#define SENINF_CSI2_RESYNC_MERGE_CTL_CPHY_LANE_RESYNC_CNT GENMASK(2, 0)
+#define SENINF_CSI2_RESYNC_MERGE_CTL_BYPASS_LANE_RESYNC BIT(10)
+#define SENINF_CSI2_RESYNC_MERGE_CTL_CDPHY_SEL BIT(11)
+#define SENINF_CSI2_MODE 0x0ae8
+#define SENINF_CSI2_MODE_CSR_CSI2_MODE GENMASK(7, 0)
+#define SENINF_CSI2_MODE_CSR_CSI2_HEADER_LEN GENMASK(10, 8)
+#define SENINF_CSI2_DPHY_SYNC 0x0b20
+#define SENINF_CSI2_DPHY_SYNC_SYNC_SEQ_MASK_0 GENMASK(15, 0)
+#define SENINF_CSI2_DPHY_SYNC_SYNC_SEQ_PAT_0 GENMASK(31, 16)
+#define SENINF_MUX_CTRL 0x0d00
+#define SENINF_MUX_CTRL_SENINF_MUX_SW_RST BIT(0)
+#define SENINF_MUX_CTRL_SENINF_IRQ_SW_RST BIT(1)
+#define SENINF_MUX_CTRL_SENINF_HSYNC_MASK BIT(7)
+#define SENINF_MUX_CTRL_SENINF_PIX_SEL BIT(8)
+#define SENINF_MUX_CTRL_SENINF_VSYNC_POL BIT(9)
+#define SENINF_MUX_CTRL_SENINF_HSYNC_POL BIT(10)
+#define SENINF_MUX_CTRL_SENINF_SRC_SEL GENMASK(15, 12)
+#define SENINF_MUX_CTRL_FIFO_PUSH_EN GENMASK(21, 16)
+#define FIFO_PUSH_EN_NORMAL_MODE 0x1f
+#define FIFO_PUSH_EN_JPEG_2_PIXEL_MODE 0x1e
+#define SENINF_MUX_CTRL_FIFO_FLUSH_EN GENMASK(28, 22)
+#define FIFO_FLUSH_EN_NORMAL_MODE 0x1b
+#define FIFO_FLUSH_EN_JPEG_2_PIXEL_MODE 0x18
+#define SENINF_MUX_CTRL_FIFO_FULL_WR_EN GENMASK(29, 28)
+#define SENINF_MUX_CTRL_SENINF_MUX_EN BIT(31)
+#define SENINF_MUX_INTEN 0x0d04
+#define SENINF_MUX_SPARE 0x0d2c
+#define SENINF_MUX_CTRL_EXT 0x0d3c
+#define SENINF_MUX_CTRL_EXT_SENINF_SRC_SEL_EXT GENMASK(1, 0)
+#define SENINF_MUX_CTRL_EXT_SENINF_PIX_SEL_EXT BIT(4)
+
+#endif /* __SENINF_REG_H__ */
--
2.43.0
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv
2024-01-10 14:14 [PATCH v4 0/5] Add Mediatek ISP3.0 Julien Stephan
` (2 preceding siblings ...)
2024-01-10 14:14 ` [PATCH v4 3/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 sensor interface Julien Stephan
@ 2024-01-10 14:14 ` Julien Stephan
2024-01-11 12:07 ` AngeloGioacchino Del Regno
` (9 more replies)
2024-01-10 14:14 ` [PATCH v4 5/5] arm64: dts: mediatek: mt8365: Add support for camera Julien Stephan
2024-01-11 8:08 ` [PATCH v4 0/5] Add Mediatek ISP3.0 Laurent Pinchart
5 siblings, 10 replies; 28+ messages in thread
From: Julien Stephan @ 2024-01-10 14:14 UTC (permalink / raw)
Cc: Phi-bang Nguyen, Florian Sylvestre, Paul Elder, Laurent Pinchart,
Julien Stephan, Andy Hsieh, AngeloGioacchino Del Regno,
Conor Dooley, devicetree, Krzysztof Kozlowski, linux-arm-kernel,
linux-kernel, linux-mediatek, linux-media, Louis Kuo,
Matthias Brugger, Mauro Carvalho Chehab, Rob Herring
From: Phi-bang Nguyen <pnguyen@baylibre.com>
This driver provides a path to bypass the SoC ISP so that image data
coming from the SENINF can go directly into memory without any image
processing. This allows the use of an external ISP.
Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
[Paul Elder fix irq locking]
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Co-developed-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
---
MAINTAINERS | 1 +
.../platform/mediatek/isp/isp_30/Kconfig | 19 +
.../platform/mediatek/isp/isp_30/Makefile | 1 +
.../mediatek/isp/isp_30/camsv/Makefile | 7 +
.../mediatek/isp/isp_30/camsv/mtk_camsv.c | 328 ++++++++
.../mediatek/isp/isp_30/camsv/mtk_camsv.h | 199 +++++
.../isp/isp_30/camsv/mtk_camsv30_hw.c | 427 ++++++++++
.../isp/isp_30/camsv/mtk_camsv30_regs.h | 60 ++
.../isp/isp_30/camsv/mtk_camsv_video.c | 774 ++++++++++++++++++
9 files changed, 1816 insertions(+)
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/Makefile
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.c
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.h
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_hw.c
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_regs.h
create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv_video.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 52d200d5e36c..ffe4d3ae62e5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13618,6 +13618,7 @@ M: Andy Hsieh <andy.hsieh@mediatek.com>
S: Supported
F: Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
F: Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
+F: drivers/media/platform/mediatek/isp/isp_30/camsv/*
F: drivers/media/platform/mediatek/isp/isp_30/seninf/*
MEDIATEK SMI DRIVER
diff --git a/drivers/media/platform/mediatek/isp/isp_30/Kconfig b/drivers/media/platform/mediatek/isp/isp_30/Kconfig
index 9791312589fb..5293a061ae0b 100644
--- a/drivers/media/platform/mediatek/isp/isp_30/Kconfig
+++ b/drivers/media/platform/mediatek/isp/isp_30/Kconfig
@@ -14,3 +14,22 @@ config MTK_SENINF30
To compile this driver as a module, choose M here: the
module will be called mtk-seninf.
+
+config MTK_CAMSV30
+ tristate "MediaTek ISP3.0 CAMSV driver"
+ depends on VIDEO_V4L2_SUBDEV_API
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on OF
+ depends on PM
+ select VIDEOBUF2_VMALLOC
+ select VIDEOBUF2_DMA_CONTIG
+ select MTK_SENINF30
+ select PHY_MTK_MIPI_CSI_0_5
+ default n
+ help
+ This driver provides a path to bypass the SoC ISP so that
+ image data come from the SENINF can go directly into memory
+ without any image processing.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mtk-camsv30.
diff --git a/drivers/media/platform/mediatek/isp/isp_30/Makefile b/drivers/media/platform/mediatek/isp/isp_30/Makefile
index ac3142de4739..a76f440c5358 100644
--- a/drivers/media/platform/mediatek/isp/isp_30/Makefile
+++ b/drivers/media/platform/mediatek/isp/isp_30/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_MTK_SENINF30) += seninf/
+obj-$(CONFIG_MTK_CAMSV30) += camsv/
diff --git a/drivers/media/platform/mediatek/isp/isp_30/camsv/Makefile b/drivers/media/platform/mediatek/isp/isp_30/camsv/Makefile
new file mode 100644
index 000000000000..fffbc6e7cb78
--- /dev/null
+++ b/drivers/media/platform/mediatek/isp/isp_30/camsv/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+
+mtk-camsv30-objs += mtk_camsv.o
+mtk-camsv30-objs += mtk_camsv30_hw.o
+mtk-camsv30-objs += mtk_camsv_video.o
+
+obj-$(CONFIG_MTK_CAMSV30) += mtk-camsv30.o
diff --git a/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.c b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.c
new file mode 100644
index 000000000000..37ee07d503b9
--- /dev/null
+++ b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.c
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 BayLibre
+ * Copyright (c) 2022 MediaTek Inc.
+ */
+
+#include <media/v4l2-async.h>
+#include <media/v4l2-device.h>
+
+#include "mtk_camsv.h"
+
+static inline struct mtk_cam_dev *to_mtk_cam_dev(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct mtk_cam_dev, subdev);
+}
+
+static const u32 mtk_cam_mbus_formats[] = {
+ MEDIA_BUS_FMT_SBGGR8_1X8,
+ MEDIA_BUS_FMT_SGBRG8_1X8,
+ MEDIA_BUS_FMT_SGRBG8_1X8,
+ MEDIA_BUS_FMT_SRGGB8_1X8,
+ MEDIA_BUS_FMT_SBGGR10_1X10,
+ MEDIA_BUS_FMT_SGBRG10_1X10,
+ MEDIA_BUS_FMT_SGRBG10_1X10,
+ MEDIA_BUS_FMT_SRGGB10_1X10,
+ MEDIA_BUS_FMT_SBGGR12_1X12,
+ MEDIA_BUS_FMT_SGBRG12_1X12,
+ MEDIA_BUS_FMT_SGRBG12_1X12,
+ MEDIA_BUS_FMT_SRGGB12_1X12,
+ MEDIA_BUS_FMT_UYVY8_1X16,
+ MEDIA_BUS_FMT_VYUY8_1X16,
+ MEDIA_BUS_FMT_YUYV8_1X16,
+ MEDIA_BUS_FMT_YVYU8_1X16,
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Subdev Operations
+ */
+
+static int mtk_cam_cio_stream_on(struct mtk_cam_dev *cam)
+{
+ struct device *dev = cam->dev;
+ struct v4l2_subdev *seninf;
+ int ret;
+
+ if (!cam->seninf) {
+ cam->seninf = media_pad_remote_pad_first(&cam->subdev_pads[MTK_CAM_CIO_PAD_SENINF]);
+ if (!cam->seninf) {
+ dev_err(dev, "%s: No SENINF connected\n", __func__);
+ return -ENOLINK;
+ }
+ }
+
+ seninf = media_entity_to_v4l2_subdev(cam->seninf->entity);
+
+ /* Seninf must stream on first */
+ ret = v4l2_subdev_call(seninf, pad, enable_streams, NULL, cam->seninf->index, 0);
+ if (ret) {
+ dev_err(dev, "failed to stream on %s:%d\n",
+ seninf->entity.name, ret);
+ return ret;
+ }
+
+ cam->streaming = true;
+
+ return 0;
+}
+
+static int mtk_cam_cio_stream_off(struct mtk_cam_dev *cam)
+{
+ int ret;
+
+ if (cam->seninf) {
+ struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(cam->seninf->entity);
+
+ ret = v4l2_subdev_call(sd, pad, disable_streams, NULL,
+ cam->seninf->index, 0);
+ if (ret) {
+ dev_err(cam->dev, "failed to stream off %s:%d\n",
+ sd->entity.name, ret);
+ return ret;
+ }
+ }
+
+ cam->streaming = false;
+
+ return 0;
+}
+
+static int mtk_cam_sd_s_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct mtk_cam_dev *cam = to_mtk_cam_dev(sd);
+
+ if (enable) {
+ /* Align vb2_core_streamon design */
+ if (cam->streaming) {
+ dev_warn(cam->dev, "already streaming on\n");
+ return 0;
+ }
+ return mtk_cam_cio_stream_on(cam);
+ }
+
+ if (!cam->streaming) {
+ dev_warn(cam->dev, "already streaming off\n");
+ return 0;
+ }
+
+ return mtk_cam_cio_stream_off(cam);
+}
+
+static struct v4l2_mbus_framefmt *
+mtk_cam_get_pad_format(struct mtk_cam_dev *cam,
+ struct v4l2_subdev_state *sd_state,
+ unsigned int pad, u32 which)
+{
+ switch (which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+ return v4l2_subdev_get_try_format(&cam->subdev, sd_state, pad);
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
+ return &cam->formats[pad];
+ default:
+ return NULL;
+ }
+}
+
+static int mtk_cam_init_cfg(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state)
+{
+ static const struct v4l2_mbus_framefmt def_format = {
+ .code = MEDIA_BUS_FMT_SGRBG10_1X10,
+ .width = IMG_DEF_WIDTH,
+ .height = IMG_DEF_HEIGHT,
+ .field = V4L2_FIELD_NONE,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .xfer_func = V4L2_XFER_FUNC_DEFAULT,
+ .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT,
+ .quantization = V4L2_QUANTIZATION_DEFAULT,
+ };
+
+ struct mtk_cam_dev *cam = to_mtk_cam_dev(sd);
+ u32 which = sd_state ? V4L2_SUBDEV_FORMAT_TRY
+ : V4L2_SUBDEV_FORMAT_ACTIVE;
+ struct v4l2_mbus_framefmt *format;
+ unsigned int i;
+
+ for (i = 0; i < sd->entity.num_pads; i++) {
+ format = mtk_cam_get_pad_format(cam, sd_state, i, which);
+ *format = def_format;
+ }
+
+ return 0;
+}
+
+static int mtk_cam_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->index >= ARRAY_SIZE(mtk_cam_mbus_formats))
+ return -EINVAL;
+
+ code->code = mtk_cam_mbus_formats[code->index];
+
+ return 0;
+}
+
+static int mtk_cam_get_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_format *fmt)
+{
+ struct mtk_cam_dev *cam = to_mtk_cam_dev(sd);
+
+ fmt->format = *mtk_cam_get_pad_format(cam, sd_state, fmt->pad,
+ fmt->which);
+
+ return 0;
+}
+
+static int mtk_cam_set_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_format *fmt)
+{
+ struct mtk_cam_dev *cam = to_mtk_cam_dev(sd);
+ struct v4l2_mbus_framefmt *format;
+ unsigned int i;
+
+ /*
+ * We only support pass-through mode, the format on source pads can't
+ * be modified.
+ */
+ if (fmt->pad != MTK_CAM_CIO_PAD_SENINF)
+ return mtk_cam_get_fmt(sd, sd_state, fmt);
+
+ for (i = 0; i < ARRAY_SIZE(mtk_cam_mbus_formats); ++i) {
+ if (mtk_cam_mbus_formats[i] == fmt->format.code)
+ break;
+ }
+
+ if (i == ARRAY_SIZE(mtk_cam_mbus_formats))
+ fmt->format.code = mtk_cam_mbus_formats[0];
+
+ format = mtk_cam_get_pad_format(cam, sd_state, fmt->pad, fmt->which);
+ format->width = fmt->format.width;
+ format->height = fmt->format.height;
+ format->code = fmt->format.code;
+
+ fmt->format = *format;
+
+ /* Propagate the format to the source pad. */
+ format = mtk_cam_get_pad_format(cam, sd_state, MTK_CAM_CIO_PAD_VIDEO,
+ fmt->which);
+ format->width = fmt->format.width;
+ format->height = fmt->format.height;
+ format->code = fmt->format.code;
+
+ return 0;
+}
+
+static int mtk_cam_subdev_registered(struct v4l2_subdev *sd)
+{
+ struct mtk_cam_dev *cam = to_mtk_cam_dev(sd);
+
+ /* Create the video device and link. */
+ return mtk_cam_video_register(cam);
+}
+
+static const struct v4l2_subdev_video_ops mtk_cam_subdev_video_ops = {
+ .s_stream = mtk_cam_sd_s_stream,
+};
+
+static const struct v4l2_subdev_pad_ops mtk_cam_subdev_pad_ops = {
+ .init_cfg = mtk_cam_init_cfg,
+ .enum_mbus_code = mtk_cam_enum_mbus_code,
+ .set_fmt = mtk_cam_set_fmt,
+ .get_fmt = mtk_cam_get_fmt,
+ .link_validate = v4l2_subdev_link_validate_default,
+};
+
+static const struct v4l2_subdev_ops mtk_cam_subdev_ops = {
+ .video = &mtk_cam_subdev_video_ops,
+ .pad = &mtk_cam_subdev_pad_ops,
+};
+
+static const struct v4l2_subdev_internal_ops mtk_cam_internal_ops = {
+ .registered = mtk_cam_subdev_registered,
+};
+
+/* -----------------------------------------------------------------------------
+ * Media Entity Operations
+ */
+
+static const struct media_entity_operations mtk_cam_media_entity_ops = {
+ .link_validate = v4l2_subdev_link_validate,
+ .get_fwnode_pad = v4l2_subdev_get_fwnode_pad_1_to_1,
+};
+
+/* -----------------------------------------------------------------------------
+ * Init & Cleanup
+ */
+
+static int mtk_cam_v4l2_register(struct mtk_cam_dev *cam)
+{
+ struct device *dev = cam->dev;
+ int ret;
+
+ cam->subdev_pads[MTK_CAM_CIO_PAD_SENINF].flags = MEDIA_PAD_FL_SINK;
+ cam->subdev_pads[MTK_CAM_CIO_PAD_VIDEO].flags = MEDIA_PAD_FL_SOURCE;
+
+ /* Initialize subdev pads */
+ ret = media_entity_pads_init(&cam->subdev.entity,
+ ARRAY_SIZE(cam->subdev_pads),
+ cam->subdev_pads);
+ if (ret) {
+ dev_err(dev, "failed to initialize media pads:%d\n", ret);
+ return ret;
+ }
+
+ /* Initialize subdev */
+ v4l2_subdev_init(&cam->subdev, &mtk_cam_subdev_ops);
+
+ cam->subdev.dev = dev;
+ cam->subdev.entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
+ cam->subdev.entity.ops = &mtk_cam_media_entity_ops;
+ cam->subdev.internal_ops = &mtk_cam_internal_ops;
+ cam->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
+ strscpy(cam->subdev.name, dev_name(dev), sizeof(cam->subdev.name));
+ v4l2_set_subdevdata(&cam->subdev, cam);
+
+ mtk_cam_init_cfg(&cam->subdev, NULL);
+
+ ret = v4l2_async_register_subdev(&cam->subdev);
+ if (ret) {
+ dev_err(dev, "failed to initialize subdev:%d\n", ret);
+ media_entity_cleanup(&cam->subdev.entity);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void mtk_cam_v4l2_unregister(struct mtk_cam_dev *cam)
+{
+ mtk_cam_video_unregister(&cam->vdev);
+
+ media_entity_cleanup(&cam->subdev.entity);
+ v4l2_async_unregister_subdev(&cam->subdev);
+}
+
+int mtk_cam_dev_init(struct mtk_cam_dev *cam_dev)
+{
+ int ret;
+
+ mutex_init(&cam_dev->op_lock);
+
+ /* v4l2 sub-device registration */
+ ret = mtk_cam_v4l2_register(cam_dev);
+ if (ret) {
+ mutex_destroy(&cam_dev->op_lock);
+ return ret;
+ }
+
+ return 0;
+}
+
+void mtk_cam_dev_cleanup(struct mtk_cam_dev *cam)
+{
+ mtk_cam_v4l2_unregister(cam);
+ mutex_destroy(&cam->op_lock);
+}
diff --git a/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.h b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.h
new file mode 100644
index 000000000000..f7aec8c49db6
--- /dev/null
+++ b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.h
@@ -0,0 +1,199 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 BayLibre
+ * Copyright (c) 2022 MediaTek Inc.
+ */
+
+#ifndef __MTK_CAMSV_H__
+#define __MTK_CAMSV_H__
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/of_graph.h>
+#include <linux/pm_runtime.h>
+#include <linux/videodev2.h>
+#include <media/media-entity.h>
+#include <media/v4l2-subdev.h>
+#include <media/videobuf2-core.h>
+#include <media/videobuf2-dma-contig.h>
+#include <media/videobuf2-v4l2.h>
+#include <soc/mediatek/smi.h>
+
+#define IMG_MAX_WIDTH 5376
+#define IMG_MAX_HEIGHT 4032
+#define IMG_DEF_WIDTH 1920
+#define IMG_DEF_HEIGHT 1080
+#define IMG_MIN_WIDTH 80
+#define IMG_MIN_HEIGHT 60
+
+#define MTK_CAM_CIO_PAD_SENINF 0
+#define MTK_CAM_CIO_PAD_VIDEO 1
+#define MTK_CAM_CIO_NUM_PADS 2
+
+struct mtk_cam_format_info {
+ u32 code;
+ u32 fourcc;
+ bool packed;
+ u8 bpp;
+};
+
+struct mtk_cam_dev_buffer {
+ struct vb2_v4l2_buffer v4l2_buf;
+ struct list_head list;
+ dma_addr_t daddr;
+ void *vaddr;
+};
+
+struct mtk_cam_sparams {
+ u32 w_factor;
+ u32 module_en_pak;
+ u32 fmt_sel;
+ u32 pak;
+ u32 imgo_stride;
+};
+
+/**
+ * struct mtk_cam_vdev_desc - MTK camera device descriptor
+ * @name: name of the node
+ * @cap: supported V4L2 capabilities
+ * @buf_type: supported V4L2 buffer type
+ * @link_flags: default media link flags
+ * @def_width: the default format width
+ * @def_height: the default format height
+ * @num_fmts: the number of supported node formats
+ * @max_buf_count: maximum VB2 buffer count
+ * @ioctl_ops: mapped to v4l2_ioctl_ops
+ * @fmts: supported format
+ * @frmsizes: supported V4L2 frame size number
+ */
+struct mtk_cam_vdev_desc {
+ const char *name;
+ u32 cap;
+ u32 buf_type;
+ u32 link_flags;
+ u32 def_width;
+ u32 def_height;
+ u8 num_fmts;
+ u8 max_buf_count;
+ const struct v4l2_ioctl_ops *ioctl_ops;
+ const u32 *fmts;
+ const struct v4l2_frmsizeenum *frmsizes;
+};
+
+/**
+ * struct mtk_cam_video_device - MediaTek video device structure
+ * @desc: The node description of video device
+ * @vdev_pad: The media pad graph object of video device
+ * @vdev: The video device instance
+ * @vbq: A videobuf queue of video device
+ * @vdev_lock: Serializes vb2 queue and video device operations
+ * @format: The V4L2 format of video device
+ * @fmtinfo: Information about the current format
+ */
+struct mtk_cam_video_device {
+ const struct mtk_cam_vdev_desc *desc;
+
+ struct media_pad vdev_pad;
+ struct video_device vdev;
+ struct vb2_queue vbq;
+
+ /* Serializes vb2 queue and video device operations */
+ struct mutex vdev_lock;
+
+ struct v4l2_pix_format_mplane format;
+ const struct mtk_cam_format_info *fmtinfo;
+};
+
+/**
+ * struct mtk_cam_dev - MediaTek camera device structure.
+ * @dev: Pointer to device.
+ * @regs: Base address of CAMSV.
+ * @regs_img0: Base address of CAMSV IMG0.
+ * @regs_tg: Base address of CAMSV TG.
+ * @num_clks: Number of clocks.
+ * @clks: The clocks.
+ * @irq: Irq fired when buffer is ready.
+ * @conf: soc specific driver data.
+ * @pipeline: Media pipeline information.
+ * @subdev: The V4L2 sub-device instance.
+ * @subdev_pads: Media pads of this sub-device.
+ * @formats: Media bus format for all pads.
+ * @vdev: The video device node.
+ * @seninf: Pointer to the seninf pad.
+ * @streaming: Indicate the overall streaming status is on or off.
+ * @stream_count: Number of streaming video nodes.
+ * @sequence: Buffer sequence number.
+ * @op_lock: Serializes driver's VB2 callback operations.
+ * @irqlock: Protects the buffer list.
+ * @buf_list: List head for the buffer list.
+ * @hw_functions: Hardware specific functions.
+ * @dummy: Dummy buffer used when user buffer is not available.
+ * @dummy_size : Size of the dummy buffer.
+ * @is_dummy_used: True if dummy buffer is currently used.
+ */
+struct mtk_cam_dev {
+ struct device *dev;
+ void __iomem *regs;
+ void __iomem *regs_img0;
+ void __iomem *regs_tg;
+
+ unsigned int num_clks;
+ struct clk_bulk_data *clks;
+ unsigned int irq;
+ const struct mtk_cam_conf *conf;
+
+ struct media_pipeline pipeline;
+ struct v4l2_subdev subdev;
+ struct media_pad subdev_pads[MTK_CAM_CIO_NUM_PADS];
+ struct v4l2_mbus_framefmt formats[MTK_CAM_CIO_NUM_PADS];
+ struct mtk_cam_video_device vdev;
+ struct media_pad *seninf;
+ unsigned int streaming;
+ unsigned int stream_count;
+ unsigned int sequence;
+
+ struct mutex op_lock;
+ spinlock_t irqlock;
+
+ struct list_head buf_list;
+
+ struct mtk_cam_hw_functions *hw_functions;
+
+ struct mtk_cam_dev_buffer dummy;
+ unsigned int dummy_size;
+ bool is_dummy_used;
+};
+
+/**
+ * struct mtk_cam_conf - MediaTek camera configuration structure
+ * @tg_sen_mode: TG sensor mode
+ * @module_en: module enable
+ * @imgo_con: dma control register
+ * @imgo_con2: dma control register 2
+ */
+struct mtk_cam_conf {
+ u32 tg_sen_mode;
+ u32 module_en;
+ u32 imgo_con;
+ u32 imgo_con2;
+};
+
+struct mtk_cam_hw_functions {
+ void (*mtk_cam_setup)(struct mtk_cam_dev *cam_dev, u32 width,
+ u32 height, u32 bpl, u32 mbus_fmt);
+ void (*mtk_cam_update_buffers_add)(struct mtk_cam_dev *cam_dev,
+ struct mtk_cam_dev_buffer *buf);
+ void (*mtk_cam_cmos_vf_hw_enable)(struct mtk_cam_dev *cam_dev,
+ bool pak_en);
+ void (*mtk_cam_cmos_vf_hw_disable)(struct mtk_cam_dev *cam_dev,
+ bool pak_en);
+};
+
+int mtk_cam_dev_init(struct mtk_cam_dev *cam_dev);
+void mtk_cam_dev_cleanup(struct mtk_cam_dev *cam_dev);
+int mtk_cam_video_register(struct mtk_cam_dev *cam_dev);
+void mtk_cam_video_unregister(struct mtk_cam_video_device *vdev);
+
+#endif /* __MTK_CAMSV_H__ */
diff --git a/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_hw.c b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_hw.c
new file mode 100644
index 000000000000..3b8ccdab2af0
--- /dev/null
+++ b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_hw.c
@@ -0,0 +1,427 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 BayLibre
+ * Copyright (c) 2022 MediaTek Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/iommu.h>
+#include <linux/iopoll.h>
+#include <linux/ktime.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "mtk_camsv.h"
+#include "mtk_camsv30_regs.h"
+
+#define MTK_CAMSV30_AUTOSUSPEND_DELAY_MS 100
+
+static const struct mtk_cam_conf camsv30_conf = {
+ .tg_sen_mode = 0x00010002U, /* TIME_STP_EN = 1. DBL_DATA_BUS = 1 */
+ .module_en = 0x40000001U, /* enable double buffer and TG */
+ .imgo_con = 0x80000080U, /* DMA FIFO depth and burst */
+ .imgo_con2 = 0x00020002U, /* DMA priority */
+};
+
+static void fmt_to_sparams(u32 mbus_fmt, struct mtk_cam_sparams *sparams)
+{
+ switch (mbus_fmt) {
+ /* SBGGR values coming from isp5.0 configuration.
+ * not tested on isp2.0
+ */
+ case MEDIA_BUS_FMT_SBGGR12_1X12:
+ case MEDIA_BUS_FMT_SGBRG12_1X12:
+ case MEDIA_BUS_FMT_SGRBG12_1X12:
+ case MEDIA_BUS_FMT_SRGGB12_1X12:
+ sparams->w_factor = 1;
+ sparams->module_en_pak = 0x4;
+ sparams->fmt_sel = 0x2;
+ sparams->pak = 0x5;
+ sparams->imgo_stride = 0x000B0000;
+ break;
+ case MEDIA_BUS_FMT_SBGGR10_1X10:
+ case MEDIA_BUS_FMT_SGBRG10_1X10:
+ case MEDIA_BUS_FMT_SGRBG10_1X10:
+ case MEDIA_BUS_FMT_SRGGB10_1X10:
+ sparams->w_factor = 1;
+ sparams->module_en_pak = 0x4;
+ sparams->fmt_sel = 0x1;
+ sparams->pak = 0x6;
+ sparams->imgo_stride = 0x000B0000;
+ break;
+ case MEDIA_BUS_FMT_SBGGR8_1X8:
+ case MEDIA_BUS_FMT_SGBRG8_1X8:
+ case MEDIA_BUS_FMT_SGRBG8_1X8:
+ case MEDIA_BUS_FMT_SRGGB8_1X8:
+ sparams->w_factor = 1;
+ sparams->module_en_pak = 0x4;
+ sparams->fmt_sel = 0x0;
+ sparams->pak = 0x7;
+ sparams->imgo_stride = 0x000B0000;
+ break;
+ case MEDIA_BUS_FMT_UYVY8_1X16:
+ case MEDIA_BUS_FMT_VYUY8_1X16:
+ case MEDIA_BUS_FMT_YUYV8_1X16:
+ case MEDIA_BUS_FMT_YVYU8_1X16:
+ sparams->w_factor = 2;
+ sparams->module_en_pak = 0x8;
+ sparams->fmt_sel = 0x1000003;
+ sparams->pak = 0x0;
+ sparams->imgo_stride = 0x00090000;
+ break;
+ default:
+ break;
+ }
+}
+
+static void mtk_camsv30_update_buffers_add(struct mtk_cam_dev *cam_dev,
+ struct mtk_cam_dev_buffer *buf)
+{
+ writel(buf->daddr, cam_dev->regs_img0 + CAMSV_IMGO_SV_BASE_ADDR);
+
+ writel(0x1U, cam_dev->regs + CAMSV_IMGO_FBC);
+}
+
+static void mtk_camsv30_cmos_vf_hw_enable(struct mtk_cam_dev *cam_dev,
+ bool pak_en)
+{
+ u32 clk_en;
+
+ clk_en = CAMSV_TG_DP_CLK_EN | CAMSV_DMA_DP_CLK_EN;
+ if (pak_en)
+ clk_en |= CAMSV_PAK_DP_CLK_EN;
+ writel(clk_en, cam_dev->regs + CAMSV_CLK_EN);
+ writel(readl(cam_dev->regs_tg + CAMSV_TG_VF_CON) | CAMSV_TG_VF_CON_VFDATA_EN,
+ cam_dev->regs_tg + CAMSV_TG_VF_CON);
+}
+
+static void mtk_camsv30_cmos_vf_hw_disable(struct mtk_cam_dev *cam_dev,
+ bool pak_en)
+{
+ writel(readl(cam_dev->regs_tg + CAMSV_TG_SEN_MODE) & ~CAMSV_TG_SEN_MODE_CMOS_EN,
+ cam_dev->regs_tg + CAMSV_TG_SEN_MODE);
+ writel(readl(cam_dev->regs_tg + CAMSV_TG_VF_CON) & ~CAMSV_TG_VF_CON_VFDATA_EN,
+ cam_dev->regs_tg + CAMSV_TG_VF_CON);
+}
+
+static void mtk_camsv30_setup(struct mtk_cam_dev *cam_dev, u32 w, u32 h,
+ u32 bpl, u32 mbus_fmt)
+{
+ const struct mtk_cam_conf *conf = cam_dev->conf;
+ u32 int_en = INT_ST_MASK_CAMSV;
+ u32 tmp;
+ struct mtk_cam_sparams sparams;
+
+ fmt_to_sparams(mbus_fmt, &sparams);
+
+ if (pm_runtime_resume_and_get(cam_dev->dev) < 0) {
+ dev_err(cam_dev->dev, "failed to get pm_runtime\n");
+ return;
+ }
+
+ spin_lock_irq(&cam_dev->irqlock);
+
+ writel(conf->tg_sen_mode, cam_dev->regs_tg + CAMSV_TG_SEN_MODE);
+
+ writel((w * sparams.w_factor) << 16U, cam_dev->regs_tg + CAMSV_TG_SEN_GRAB_PXL);
+
+ writel(h << 16U, cam_dev->regs_tg + CAMSV_TG_SEN_GRAB_LIN);
+
+ /* YUV_U2S_DIS: disable YUV sensor unsigned to signed */
+ writel(0x1000U, cam_dev->regs_tg + CAMSV_TG_PATH_CFG);
+
+ /* Reset cam */
+ writel(CAMSV_SW_RST, cam_dev->regs + CAMSV_SW_CTL);
+ writel(0x0U, cam_dev->regs + CAMSV_SW_CTL);
+ writel(CAMSV_IMGO_RST_TRIG, cam_dev->regs + CAMSV_SW_CTL);
+
+ readl_poll_timeout_atomic(cam_dev->regs + CAMSV_SW_CTL, tmp,
+ (tmp == (CAMSV_IMGO_RST_TRIG | CAMSV_IMGO_RST_ST)), 10, 200);
+
+ writel(0x0U, cam_dev->regs + CAMSV_SW_CTL);
+
+ writel(int_en, cam_dev->regs + CAMSV_INT_EN);
+
+ writel(conf->module_en | sparams.module_en_pak,
+ cam_dev->regs + CAMSV_MODULE_EN);
+ writel(sparams.fmt_sel, cam_dev->regs + CAMSV_FMT_SEL);
+ writel(sparams.pak, cam_dev->regs + CAMSV_PAK);
+
+ writel(bpl - 1U, cam_dev->regs_img0 + CAMSV_IMGO_SV_XSIZE);
+ writel(h - 1U, cam_dev->regs_img0 + CAMSV_IMGO_SV_YSIZE);
+
+ writel(sparams.imgo_stride | bpl, cam_dev->regs_img0 + CAMSV_IMGO_SV_STRIDE);
+
+ writel(conf->imgo_con, cam_dev->regs_img0 + CAMSV_IMGO_SV_CON);
+ writel(conf->imgo_con2, cam_dev->regs_img0 + CAMSV_IMGO_SV_CON2);
+
+ /* CMOS_EN first */
+ writel(readl(cam_dev->regs_tg + CAMSV_TG_SEN_MODE) | CAMSV_TG_SEN_MODE_CMOS_EN,
+ cam_dev->regs_tg + CAMSV_TG_SEN_MODE);
+
+ /* finally, CAMSV_MODULE_EN : IMGO_EN */
+ writel(readl(cam_dev->regs + CAMSV_MODULE_EN) | CAMSV_MODULE_EN_IMGO_EN,
+ cam_dev->regs + CAMSV_MODULE_EN);
+
+ spin_unlock_irq(&cam_dev->irqlock);
+ pm_runtime_put_autosuspend(cam_dev->dev);
+}
+
+static irqreturn_t isp_irq_camsv30(int irq, void *data)
+{
+ struct mtk_cam_dev *cam_dev = (struct mtk_cam_dev *)data;
+ struct mtk_cam_dev_buffer *buf;
+ unsigned int irq_status;
+
+ spin_lock(&cam_dev->irqlock);
+
+ irq_status = readl(cam_dev->regs + CAMSV_INT_STATUS);
+
+ if (irq_status & INT_ST_MASK_CAMSV_ERR) {
+ dev_err(cam_dev->dev, "irq error 0x%x\n",
+ (unsigned int)(irq_status & INT_ST_MASK_CAMSV_ERR));
+ }
+
+ /* De-queue frame */
+ if (irq_status & CAMSV_IRQ_PASS1_DON) {
+ cam_dev->sequence++;
+
+ if (!cam_dev->is_dummy_used) {
+ buf = list_first_entry_or_null(&cam_dev->buf_list,
+ struct mtk_cam_dev_buffer,
+ list);
+ if (buf) {
+ buf->v4l2_buf.sequence = cam_dev->sequence;
+ buf->v4l2_buf.vb2_buf.timestamp = ktime_get_ns();
+ vb2_buffer_done(&buf->v4l2_buf.vb2_buf,
+ VB2_BUF_STATE_DONE);
+ list_del(&buf->list);
+ }
+ }
+
+ if (list_empty(&cam_dev->buf_list)) {
+ mtk_camsv30_update_buffers_add(cam_dev, &cam_dev->dummy);
+ cam_dev->is_dummy_used = true;
+ } else {
+ buf = list_first_entry_or_null(&cam_dev->buf_list,
+ struct mtk_cam_dev_buffer,
+ list);
+ mtk_camsv30_update_buffers_add(cam_dev, buf);
+ cam_dev->is_dummy_used = false;
+ }
+ }
+
+ spin_unlock(&cam_dev->irqlock);
+
+ return IRQ_HANDLED;
+}
+
+static int mtk_camsv30_runtime_suspend(struct device *dev)
+{
+ struct mtk_cam_dev *cam_dev = dev_get_drvdata(dev);
+ struct vb2_queue *vbq = &cam_dev->vdev.vbq;
+
+ if (vb2_is_streaming(vbq)) {
+ mutex_lock(&cam_dev->op_lock);
+ v4l2_subdev_call(&cam_dev->subdev, video, s_stream, 0);
+ mutex_unlock(&cam_dev->op_lock);
+ }
+
+ clk_bulk_disable_unprepare(cam_dev->num_clks, cam_dev->clks);
+
+ return 0;
+}
+
+static int mtk_camsv30_runtime_resume(struct device *dev)
+{
+ struct mtk_cam_dev *cam_dev = dev_get_drvdata(dev);
+ struct mtk_cam_video_device *vdev = &cam_dev->vdev;
+ const struct v4l2_pix_format_mplane *fmt = &vdev->format;
+ struct vb2_queue *vbq = &vdev->vbq;
+ struct mtk_cam_dev_buffer *buf, *buf_prev;
+ int ret;
+ unsigned long flags = 0;
+
+ ret = clk_bulk_prepare_enable(cam_dev->num_clks, cam_dev->clks);
+ if (ret) {
+ dev_err(dev, "failed to enable clock:%d\n", ret);
+ return ret;
+ }
+
+ if (vb2_is_streaming(vbq)) {
+
+ mtk_camsv30_setup(cam_dev, fmt->width, fmt->height,
+ fmt->plane_fmt[0].bytesperline, vdev->fmtinfo->code);
+
+ spin_lock_irqsave(&cam_dev->irqlock, flags);
+ buf = list_first_entry_or_null(&cam_dev->buf_list,
+ struct mtk_cam_dev_buffer,
+ list);
+ if (buf) {
+ mtk_camsv30_update_buffers_add(cam_dev, buf);
+ cam_dev->is_dummy_used = false;
+ } else {
+ mtk_camsv30_update_buffers_add(cam_dev, &cam_dev->dummy);
+ cam_dev->is_dummy_used = true;
+ }
+
+ mtk_camsv30_cmos_vf_hw_enable(cam_dev, vdev->fmtinfo->packed);
+
+ spin_unlock_irqrestore(&cam_dev->irqlock, flags);
+
+ /* Stream on the sub-device */
+ mutex_lock(&cam_dev->op_lock);
+ ret = v4l2_subdev_call(&cam_dev->subdev, video, s_stream, 1);
+
+ if (ret) {
+ cam_dev->stream_count--;
+ if (cam_dev->stream_count == 0)
+ media_pipeline_stop(vdev->vdev.entity.pads);
+ }
+ mutex_unlock(&cam_dev->op_lock);
+
+ if (ret)
+ goto fail_no_stream;
+ }
+
+ return 0;
+
+fail_no_stream:
+ spin_lock_irqsave(&cam_dev->irqlock, flags);
+ list_for_each_entry_safe(buf, buf_prev, &cam_dev->buf_list, list) {
+ buf->daddr = 0ULL;
+ list_del(&buf->list);
+ vb2_buffer_done(&buf->v4l2_buf.vb2_buf, VB2_BUF_STATE_ERROR);
+ }
+ spin_unlock_irqrestore(&cam_dev->irqlock, flags);
+ return ret;
+}
+
+static struct mtk_cam_hw_functions mtk_camsv30_hw_functions = {
+ .mtk_cam_setup = mtk_camsv30_setup,
+ .mtk_cam_update_buffers_add = mtk_camsv30_update_buffers_add,
+ .mtk_cam_cmos_vf_hw_enable = mtk_camsv30_cmos_vf_hw_enable,
+ .mtk_cam_cmos_vf_hw_disable = mtk_camsv30_cmos_vf_hw_disable,
+};
+
+static int mtk_camsv30_probe(struct platform_device *pdev)
+{
+ static const char * const clk_names[] = { "cam", "camtg", "camsv"};
+
+ struct mtk_cam_dev *cam_dev;
+ struct device *dev = &pdev->dev;
+ int ret;
+ int i;
+
+ if (!iommu_present(&platform_bus_type))
+ return -EPROBE_DEFER;
+
+ cam_dev = devm_kzalloc(dev, sizeof(*cam_dev), GFP_KERNEL);
+ if (!cam_dev)
+ return -ENOMEM;
+
+ cam_dev->conf = of_device_get_match_data(dev);
+ if (!cam_dev->conf)
+ return -ENODEV;
+
+ cam_dev->dev = dev;
+ dev_set_drvdata(dev, cam_dev);
+
+ cam_dev->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(cam_dev->regs))
+ return dev_err_probe(dev, PTR_ERR(cam_dev->regs),
+ "failed to map register base\n");
+
+
+ cam_dev->regs_img0 = devm_platform_ioremap_resource(pdev, 1);
+
+ if (IS_ERR(cam_dev->regs_img0))
+ return dev_err_probe(dev, PTR_ERR(cam_dev->regs_img0),
+ "failed to map img0 register base\n");
+
+
+ cam_dev->regs_tg = devm_platform_ioremap_resource(pdev, 2);
+ if (IS_ERR(cam_dev->regs_tg))
+ return dev_err_probe(dev, PTR_ERR(cam_dev->regs_tg),
+ "failed to map TG register base\n");
+
+
+ cam_dev->num_clks = ARRAY_SIZE(clk_names);
+ cam_dev->clks = devm_kcalloc(dev, cam_dev->num_clks,
+ sizeof(*cam_dev->clks), GFP_KERNEL);
+ if (!cam_dev->clks)
+ return -ENOMEM;
+
+ for (i = 0; i < cam_dev->num_clks; ++i)
+ cam_dev->clks[i].id = clk_names[i];
+
+ ret = devm_clk_bulk_get(dev, cam_dev->num_clks, cam_dev->clks);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to get clocks: %i\n", ret);
+
+
+ cam_dev->irq = platform_get_irq(pdev, 0);
+ ret = devm_request_irq(dev, cam_dev->irq,
+ isp_irq_camsv30, 0,
+ dev_name(dev), cam_dev);
+ if (ret != 0)
+ return dev_err_probe(dev, -ENODEV, "failed to request irq=%d\n",
+ cam_dev->irq);
+
+ cam_dev->hw_functions = &mtk_camsv30_hw_functions;
+
+ spin_lock_init(&cam_dev->irqlock);
+
+ /* initialise runtime power management */
+ pm_runtime_set_autosuspend_delay(dev, MTK_CAMSV30_AUTOSUSPEND_DELAY_MS);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_set_suspended(dev);
+ pm_runtime_enable(dev);
+
+ /* Initialize the v4l2 common part */
+ return mtk_cam_dev_init(cam_dev);
+}
+
+static int mtk_camsv30_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mtk_cam_dev *cam_dev = dev_get_drvdata(dev);
+
+ mtk_cam_dev_cleanup(cam_dev);
+ pm_runtime_put_autosuspend(dev);
+ pm_runtime_disable(dev);
+
+ return 0;
+}
+
+static const struct dev_pm_ops mtk_camsv30_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ SET_RUNTIME_PM_OPS(mtk_camsv30_runtime_suspend,
+ mtk_camsv30_runtime_resume, NULL)
+};
+
+static const struct of_device_id mtk_camsv30_of_ids[] = {
+ { .compatible = "mediatek,mt8365-camsv", .data = &camsv30_conf },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mtk_camsv30_of_ids);
+
+static struct platform_driver mtk_camsv30_driver = {
+ .probe = mtk_camsv30_probe,
+ .remove = mtk_camsv30_remove,
+ .driver = {
+ .name = "mtk-camsv-isp30",
+ .of_match_table = mtk_camsv30_of_ids,
+ .pm = &mtk_camsv30_pm_ops,
+ }
+};
+
+module_platform_driver(mtk_camsv30_driver);
+
+MODULE_DESCRIPTION("MediaTek CAMSV ISP3.0 driver");
+MODULE_AUTHOR("Florian Sylvestre <fsylvestre@baylibre.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_regs.h b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_regs.h
new file mode 100644
index 000000000000..6d30087270cc
--- /dev/null
+++ b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_regs.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2022 MediaTek Inc.
+ */
+
+#ifndef __MTK_CAMSV30_REGS_H__
+#define __MTK_CAMSV30_REGS_H__
+
+/* CAMSV */
+#define CAMSV_MODULE_EN 0x0000
+#define CAMSV_MODULE_EN_IMGO_EN BIT(4)
+#define CAMSV_FMT_SEL 0x0004
+#define CAMSV_INT_EN 0x0008
+#define CAMSV_INT_STATUS 0x000c
+#define CAMSV_SW_CTL 0x0010
+#define CAMSV_IMGO_FBC 0x001C
+#define CAMSV_CLK_EN 0x0020
+#define CAMSV_PAK 0x003c
+
+/* CAMSV_TG */
+#define CAMSV_TG_SEN_MODE 0x0010
+#define CAMSV_TG_VF_CON 0x0014
+#define CAMSV_TG_SEN_GRAB_PXL 0x0018
+#define CAMSV_TG_SEN_GRAB_LIN 0x001c
+#define CAMSV_TG_PATH_CFG 0x0020
+
+/* CAMSV_IMG0 */
+#define CAMSV_IMGO_SV_BASE_ADDR 0x0000
+#define CAMSV_IMGO_SV_XSIZE 0x0008
+#define CAMSV_IMGO_SV_YSIZE 0x000c
+#define CAMSV_IMGO_SV_STRIDE 0x0010
+#define CAMSV_IMGO_SV_CON 0x0014
+#define CAMSV_IMGO_SV_CON2 0x0018
+
+#define CAMSV_TG_SEN_MODE_CMOS_EN BIT(0)
+#define CAMSV_TG_VF_CON_VFDATA_EN BIT(0)
+
+/* CAMSV_CLK_EN bits */
+#define CAMSV_TG_DP_CLK_EN BIT(0)
+#define CAMSV_PAK_DP_CLK_EN BIT(2)
+#define CAMSV_DMA_DP_CLK_EN BIT(15)
+
+/* CAMSV_SW_CTL bits */
+#define CAMSV_IMGO_RST_TRIG BIT(0)
+#define CAMSV_IMGO_RST_ST BIT(1)
+#define CAMSV_SW_RST BIT(2)
+
+/* IRQ BITS */
+#define CAMSV_IRQ_TG_ERR BIT(4)
+#define CAMSV_IRQ_TG_GBERR BIT(5)
+#define CAMSV_IRQ_PASS1_DON BIT(10)
+#define CAMSV_IRQ_IMGO_ERR BIT(16)
+
+#define INT_ST_MASK_CAMSV \
+ (CAMSV_IRQ_PASS1_DON)
+
+#define INT_ST_MASK_CAMSV_ERR \
+ (CAMSV_IRQ_TG_ERR | CAMSV_IRQ_TG_GBERR | CAMSV_IRQ_IMGO_ERR)
+
+#endif /* __MTK_CAMSV30_REGS_H__ */
diff --git a/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv_video.c b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv_video.c
new file mode 100644
index 000000000000..2ea474eabb99
--- /dev/null
+++ b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv_video.c
@@ -0,0 +1,774 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * mtk_camsv_video.c - V4L2 video node support
+ *
+ * Copyright (c) 2020 BayLibre
+ * Copyright (c) 2022 MediaTek Inc.
+ */
+
+#include <linux/version.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-mediabus.h>
+
+#include "mtk_camsv.h"
+
+static inline struct mtk_cam_video_device *
+file_to_mtk_cam_video_device(struct file *__file)
+{
+ return container_of(video_devdata(__file),
+ struct mtk_cam_video_device, vdev);
+}
+
+static inline struct mtk_cam_video_device *
+vb2_queue_to_mtk_cam_video_device(struct vb2_queue *vq)
+{
+ return container_of(vq, struct mtk_cam_video_device, vbq);
+}
+
+static inline struct mtk_cam_dev_buffer *
+to_mtk_cam_dev_buffer(struct vb2_buffer *buf)
+{
+ return container_of(buf, struct mtk_cam_dev_buffer, v4l2_buf.vb2_buf);
+}
+
+/* -----------------------------------------------------------------------------
+ * Format Information
+ */
+
+static const struct mtk_cam_format_info mtk_cam_format_info[] = {
+ {
+ .fourcc = V4L2_PIX_FMT_SBGGR8,
+ .code = MEDIA_BUS_FMT_SBGGR8_1X8,
+ .packed = true,
+ .bpp = 8,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SGBRG8,
+ .code = MEDIA_BUS_FMT_SGBRG8_1X8,
+ .packed = true,
+ .bpp = 8,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SGRBG8,
+ .code = MEDIA_BUS_FMT_SGRBG8_1X8,
+ .packed = true,
+ .bpp = 8,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SRGGB8,
+ .code = MEDIA_BUS_FMT_SRGGB8_1X8,
+ .packed = true,
+ .bpp = 8,
+ }, {
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .code = MEDIA_BUS_FMT_YUYV8_1X16,
+ .packed = true,
+ .bpp = 16,
+ }, {
+ .fourcc = V4L2_PIX_FMT_YVYU,
+ .code = MEDIA_BUS_FMT_YVYU8_1X16,
+ .packed = true,
+ .bpp = 16,
+ }, {
+ .fourcc = V4L2_PIX_FMT_UYVY,
+ .code = MEDIA_BUS_FMT_UYVY8_1X16,
+ .packed = true,
+ .bpp = 16,
+ }, {
+ .fourcc = V4L2_PIX_FMT_VYUY,
+ .code = MEDIA_BUS_FMT_VYUY8_1X16,
+ .packed = true,
+ .bpp = 16,
+ },
+};
+
+static const struct mtk_cam_format_info *
+mtk_cam_format_info_by_fourcc(u32 fourcc)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(mtk_cam_format_info); ++i) {
+ const struct mtk_cam_format_info *info =
+ &mtk_cam_format_info[i];
+
+ if (info->fourcc == fourcc)
+ return info;
+ }
+
+ return NULL;
+}
+
+static const struct mtk_cam_format_info *
+mtk_cam_format_info_by_code(u32 code)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(mtk_cam_format_info); ++i) {
+ const struct mtk_cam_format_info *info =
+ &mtk_cam_format_info[i];
+
+ if (info->code == code)
+ return info;
+ }
+
+ return NULL;
+}
+
+static bool mtk_cam_dev_find_fmt(const struct mtk_cam_vdev_desc *desc,
+ u32 format)
+{
+ unsigned int i;
+
+ for (i = 0; i < desc->num_fmts; i++) {
+ if (desc->fmts[i] == format)
+ return true;
+ }
+
+ return false;
+}
+
+static void calc_bpl_size_pix_mp(const struct mtk_cam_format_info *fmtinfo,
+ struct v4l2_pix_format_mplane *pix_mp)
+{
+ unsigned int bpl;
+ unsigned int i;
+
+ bpl = ALIGN(DIV_ROUND_UP(pix_mp->width * fmtinfo->bpp, 8), 2);
+
+ for (i = 0; i < pix_mp->num_planes; ++i) {
+ pix_mp->plane_fmt[i].bytesperline = bpl;
+ pix_mp->plane_fmt[i].sizeimage = bpl * pix_mp->height;
+ }
+}
+
+static void mtk_cam_dev_load_default_fmt(struct mtk_cam_dev *cam)
+{
+ struct mtk_cam_video_device *vdev = &cam->vdev;
+ struct v4l2_pix_format_mplane *fmt = &vdev->format;
+
+ fmt->num_planes = 1;
+ fmt->pixelformat = vdev->desc->fmts[0];
+ fmt->width = vdev->desc->def_width;
+ fmt->height = vdev->desc->def_height;
+
+ fmt->colorspace = V4L2_COLORSPACE_SRGB;
+ fmt->field = V4L2_FIELD_NONE;
+ fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
+ fmt->quantization = V4L2_QUANTIZATION_DEFAULT;
+ fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT;
+
+ vdev->fmtinfo = mtk_cam_format_info_by_fourcc(fmt->pixelformat);
+
+ calc_bpl_size_pix_mp(vdev->fmtinfo, fmt);
+}
+
+/* -----------------------------------------------------------------------------
+ * VB2 Queue Operations
+ */
+
+static int mtk_cam_vb2_queue_setup(struct vb2_queue *vq,
+ unsigned int *num_buffers,
+ unsigned int *num_planes,
+ unsigned int sizes[],
+ struct device *alloc_devs[])
+{
+ struct mtk_cam_video_device *vdev =
+ vb2_queue_to_mtk_cam_video_device(vq);
+ unsigned int max_buffer_count = vdev->desc->max_buf_count;
+ const struct v4l2_pix_format_mplane *fmt = &vdev->format;
+ unsigned int size;
+ unsigned int np_conf;
+ unsigned int i;
+
+ /* Check the limitation of buffer size */
+ if (max_buffer_count)
+ *num_buffers = clamp_val(*num_buffers, 1, max_buffer_count);
+
+ size = fmt->plane_fmt[0].sizeimage;
+ /* Add for q.create_bufs with fmt.g_sizeimage(p) / 2 test */
+
+ np_conf = 1;
+
+ if (*num_planes == 0) {
+ *num_planes = np_conf;
+ for (i = 0; i < *num_planes; ++i)
+ sizes[i] = size;
+ } else if (*num_planes != np_conf || sizes[0] < size) {
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int mtk_cam_vb2_buf_init(struct vb2_buffer *vb)
+{
+ struct mtk_cam_dev_buffer *buf = to_mtk_cam_dev_buffer(vb);
+
+ buf->daddr = 0ULL;
+
+ return 0;
+}
+
+static int mtk_cam_vb2_buf_prepare(struct vb2_buffer *vb)
+{
+ struct mtk_cam_video_device *vdev =
+ vb2_queue_to_mtk_cam_video_device(vb->vb2_queue);
+ struct mtk_cam_dev *cam = vb2_get_drv_priv(vb->vb2_queue);
+ struct mtk_cam_dev_buffer *buf = to_mtk_cam_dev_buffer(vb);
+ const struct v4l2_pix_format_mplane *fmt = &vdev->format;
+ u32 size;
+ int i;
+
+ for (i = 0; i < vb->num_planes; i++) {
+ size = fmt->plane_fmt[i].sizeimage;
+ if (vb2_plane_size(vb, i) < size) {
+ dev_err(cam->dev, "plane size is too small:%lu<%u\n",
+ vb2_plane_size(vb, i), size);
+ return -EINVAL;
+ }
+ }
+
+ buf->v4l2_buf.field = V4L2_FIELD_NONE;
+
+ for (i = 0; i < vb->num_planes; i++) {
+ size = fmt->plane_fmt[i].sizeimage;
+ vb2_set_plane_payload(vb, i, size);
+ }
+
+ if (buf->daddr == 0ULL)
+ buf->daddr = vb2_dma_contig_plane_dma_addr(vb, 0);
+
+ return 0;
+}
+
+static void mtk_cam_vb2_buf_queue(struct vb2_buffer *vb)
+{
+ struct mtk_cam_dev *cam = vb2_get_drv_priv(vb->vb2_queue);
+ struct mtk_cam_dev_buffer *buf = to_mtk_cam_dev_buffer(vb);
+ unsigned long flags = 0;
+
+ /* added the buffer into the tracking list */
+ spin_lock_irqsave(&cam->irqlock, flags);
+ list_add_tail(&buf->list, &cam->buf_list);
+ spin_unlock_irqrestore(&cam->irqlock, flags);
+}
+
+static void mtk_cam_vb2_return_all_buffers(struct mtk_cam_dev *cam,
+ enum vb2_buffer_state state)
+{
+ struct mtk_cam_dev_buffer *buf, *buf_prev;
+ unsigned long flags = 0;
+
+ spin_lock_irqsave(&cam->irqlock, flags);
+ list_for_each_entry_safe(buf, buf_prev, &cam->buf_list, list) {
+ buf->daddr = 0ULL;
+ list_del(&buf->list);
+ vb2_buffer_done(&buf->v4l2_buf.vb2_buf, state);
+ }
+ spin_unlock_irqrestore(&cam->irqlock, flags);
+}
+
+static void mtk_cam_cmos_vf_enable(struct mtk_cam_dev *cam_dev,
+ bool enable, bool pak_en)
+{
+ struct device *dev = cam_dev->dev;
+ unsigned long flags = 0;
+
+ if (pm_runtime_get_sync(dev) < 0) {
+ dev_err(dev, "failed to get pm_runtime\n");
+ goto out;
+ }
+
+ spin_lock_irqsave(&cam_dev->irqlock, flags);
+ if (enable)
+ (*cam_dev->hw_functions->mtk_cam_cmos_vf_hw_enable)(cam_dev, pak_en);
+ else
+ (*cam_dev->hw_functions->mtk_cam_cmos_vf_hw_disable)(cam_dev, pak_en);
+ spin_unlock_irqrestore(&cam_dev->irqlock, flags);
+
+out:
+ pm_runtime_put_autosuspend(dev);
+}
+
+static int mtk_cam_verify_format(struct mtk_cam_dev *cam)
+{
+ struct mtk_cam_video_device *vdev = &cam->vdev;
+ struct v4l2_subdev_format fmt = {
+ .which = V4L2_SUBDEV_FORMAT_ACTIVE,
+ .pad = MTK_CAM_CIO_PAD_VIDEO,
+ };
+ int ret;
+
+ ret = v4l2_subdev_call(&cam->subdev, pad, get_fmt, NULL, &fmt);
+ if (ret < 0)
+ return ret == -ENOIOCTLCMD ? -EINVAL : ret;
+
+ if (vdev->fmtinfo->code != fmt.format.code ||
+ vdev->format.height != fmt.format.height ||
+ vdev->format.width != fmt.format.width)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int mtk_cam_vb2_start_streaming(struct vb2_queue *vq,
+ unsigned int count)
+{
+ struct mtk_cam_dev *cam = vb2_get_drv_priv(vq);
+ struct mtk_cam_dev_buffer *buf;
+ struct mtk_cam_video_device *vdev =
+ vb2_queue_to_mtk_cam_video_device(vq);
+ struct device *dev = cam->dev;
+ const struct v4l2_pix_format_mplane *fmt = &vdev->format;
+ int ret;
+ unsigned long flags = 0;
+
+ if (pm_runtime_get_sync(dev) < 0) {
+ dev_err(dev, "failed to get pm_runtime\n");
+ pm_runtime_put_autosuspend(dev);
+ return -1;
+ }
+
+ (*cam->hw_functions->mtk_cam_setup)(cam, fmt->width, fmt->height,
+ fmt->plane_fmt[0].bytesperline, vdev->fmtinfo->code);
+
+
+ /* Enable CMOS and VF */
+ mtk_cam_cmos_vf_enable(cam, true, vdev->fmtinfo->packed);
+
+ mutex_lock(&cam->op_lock);
+
+ ret = mtk_cam_verify_format(cam);
+ if (ret < 0)
+ goto fail_unlock;
+
+ /* Start streaming of the whole pipeline now*/
+ if (!cam->pipeline.start_count) {
+ ret = media_pipeline_start(vdev->vdev.entity.pads,
+ &cam->pipeline);
+ if (ret) {
+ dev_err(dev, "failed to start pipeline:%d\n", ret);
+ goto fail_unlock;
+ }
+ }
+
+ /* Media links are fixed after media_pipeline_start */
+ cam->stream_count++;
+
+ cam->sequence = (unsigned int)-1;
+
+ /* Stream on the sub-device */
+ ret = v4l2_subdev_call(&cam->subdev, video, s_stream, 1);
+ if (ret)
+ goto fail_no_stream;
+
+ mutex_unlock(&cam->op_lock);
+
+ /* Create dummy buffer */
+ cam->dummy_size = fmt->plane_fmt[0].sizeimage;
+
+ cam->dummy.vaddr = dma_alloc_coherent(cam->dev, cam->dummy_size,
+ &cam->dummy.daddr, GFP_KERNEL);
+ if (!cam->dummy.vaddr) {
+ ret = -ENOMEM;
+ goto fail_no_buffer;
+ }
+
+ /* update first buffer address */
+
+ /* added the buffer into the tracking list */
+ spin_lock_irqsave(&cam->irqlock, flags);
+ if (list_empty(&cam->buf_list)) {
+ (*cam->hw_functions->mtk_cam_update_buffers_add)(cam, &cam->dummy);
+ cam->is_dummy_used = true;
+ } else {
+ buf = list_first_entry_or_null(&cam->buf_list,
+ struct mtk_cam_dev_buffer,
+ list);
+ (*cam->hw_functions->mtk_cam_update_buffers_add)(cam, buf);
+ cam->is_dummy_used = false;
+ }
+ spin_unlock_irqrestore(&cam->irqlock, flags);
+
+ return 0;
+
+fail_no_buffer:
+ mutex_lock(&cam->op_lock);
+ v4l2_subdev_call(&cam->subdev, video, s_stream, 0);
+fail_no_stream:
+ cam->stream_count--;
+ if (cam->stream_count == 0)
+ media_pipeline_stop(vdev->vdev.entity.pads);
+fail_unlock:
+ mutex_unlock(&cam->op_lock);
+ mtk_cam_vb2_return_all_buffers(cam, VB2_BUF_STATE_QUEUED);
+
+ return ret;
+}
+
+static void mtk_cam_vb2_stop_streaming(struct vb2_queue *vq)
+{
+ struct mtk_cam_dev *cam = vb2_get_drv_priv(vq);
+ struct mtk_cam_video_device *vdev =
+ vb2_queue_to_mtk_cam_video_device(vq);
+
+ /* Disable CMOS and VF */
+ mtk_cam_cmos_vf_enable(cam, false, false);
+
+ mutex_lock(&cam->op_lock);
+
+ v4l2_subdev_call(&cam->subdev, video, s_stream, 0);
+
+ mtk_cam_vb2_return_all_buffers(cam, VB2_BUF_STATE_ERROR);
+ cam->stream_count--;
+ if (cam->stream_count) {
+ mutex_unlock(&cam->op_lock);
+ return;
+ }
+
+ /* Destroy dummy buffer */
+ if (cam->dummy.vaddr) {
+ dma_free_coherent(cam->dev, cam->dummy_size, cam->dummy.vaddr,
+ cam->dummy.daddr);
+ memset(&cam->dummy, 0, sizeof(cam->dummy));
+ cam->dummy_size = 0;
+ cam->is_dummy_used = false;
+ }
+
+ mutex_unlock(&cam->op_lock);
+
+ media_pipeline_stop(vdev->vdev.entity.pads);
+}
+
+static const struct vb2_ops mtk_cam_vb2_ops = {
+ .queue_setup = mtk_cam_vb2_queue_setup,
+ .buf_init = mtk_cam_vb2_buf_init,
+ .buf_prepare = mtk_cam_vb2_buf_prepare,
+ .buf_queue = mtk_cam_vb2_buf_queue,
+ .start_streaming = mtk_cam_vb2_start_streaming,
+ .stop_streaming = mtk_cam_vb2_stop_streaming,
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Video IOCTLs
+ */
+
+static int mtk_cam_vidioc_querycap(struct file *file, void *fh,
+ struct v4l2_capability *cap)
+{
+ struct mtk_cam_dev *cam = video_drvdata(file);
+
+ strscpy(cap->driver, dev_driver_string(cam->dev), sizeof(cap->driver));
+ strscpy(cap->card, dev_driver_string(cam->dev), sizeof(cap->card));
+ snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
+ dev_name(cam->dev));
+
+ /* Minimum v4l2 api kernel version required by libcamera is 5.0.0 */
+ cap->version = KERNEL_VERSION(5, 0, 0);
+
+ return 0;
+}
+
+static int mtk_cam_vidioc_enum_fmt(struct file *file, void *fh,
+ struct v4l2_fmtdesc *f)
+{
+ struct mtk_cam_video_device *vdev = file_to_mtk_cam_video_device(file);
+ const struct mtk_cam_format_info *fmtinfo;
+ unsigned int i;
+
+ /* If mbus_code is not set enumerate all supported formats. */
+ if (!f->mbus_code) {
+ if (f->index >= vdev->desc->num_fmts)
+ return -EINVAL;
+
+ /* f->description is filled in v4l_fill_fmtdesc function */
+ f->pixelformat = vdev->desc->fmts[f->index];
+ f->flags = 0;
+
+ return 0;
+ }
+
+ /*
+ * Otherwise only enumerate supported pixel formats corresponding to
+ * that bus code.
+ */
+ if (f->index)
+ return -EINVAL;
+
+ fmtinfo = mtk_cam_format_info_by_code(f->mbus_code);
+ if (!fmtinfo)
+ return -EINVAL;
+
+ for (i = 0; i < vdev->desc->num_fmts; ++i) {
+ if (vdev->desc->fmts[i] == fmtinfo->fourcc) {
+ f->pixelformat = fmtinfo->fourcc;
+ f->flags = 0;
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int mtk_cam_vidioc_g_fmt(struct file *file, void *fh,
+ struct v4l2_format *f)
+{
+ struct mtk_cam_video_device *vdev = file_to_mtk_cam_video_device(file);
+
+ f->fmt.pix_mp = vdev->format;
+
+ return 0;
+}
+
+static int mtk_cam_vidioc_try_fmt(struct file *file, void *fh,
+ struct v4l2_format *f)
+{
+ struct mtk_cam_video_device *vdev = file_to_mtk_cam_video_device(file);
+ struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
+ const struct mtk_cam_format_info *fmtinfo;
+
+ /* Validate pixelformat */
+ if (!mtk_cam_dev_find_fmt(vdev->desc, pix_mp->pixelformat))
+ pix_mp->pixelformat = vdev->desc->fmts[0];
+
+ pix_mp->width = clamp_val(pix_mp->width, IMG_MIN_WIDTH, IMG_MAX_WIDTH);
+ pix_mp->height = clamp_val(pix_mp->height, IMG_MIN_HEIGHT,
+ IMG_MAX_HEIGHT);
+
+ pix_mp->num_planes = 1;
+
+ fmtinfo = mtk_cam_format_info_by_fourcc(pix_mp->pixelformat);
+ calc_bpl_size_pix_mp(fmtinfo, pix_mp);
+
+ /* Constant format fields */
+ pix_mp->colorspace = V4L2_COLORSPACE_SRGB;
+ pix_mp->field = V4L2_FIELD_NONE;
+ pix_mp->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
+ pix_mp->quantization = V4L2_QUANTIZATION_DEFAULT;
+ pix_mp->xfer_func = V4L2_XFER_FUNC_DEFAULT;
+
+ return 0;
+}
+
+static int mtk_cam_vidioc_s_fmt(struct file *file, void *fh,
+ struct v4l2_format *f)
+{
+ struct mtk_cam_dev *cam = video_drvdata(file);
+ struct mtk_cam_video_device *vdev = file_to_mtk_cam_video_device(file);
+ int ret;
+
+ if (vb2_is_busy(vdev->vdev.queue)) {
+ dev_dbg(cam->dev, "%s: queue is busy\n", __func__);
+ return -EBUSY;
+ }
+
+ ret = mtk_cam_vidioc_try_fmt(file, fh, f);
+ if (ret)
+ return ret;
+
+ /* Configure to video device */
+ vdev->format = f->fmt.pix_mp;
+ vdev->fmtinfo =
+ mtk_cam_format_info_by_fourcc(f->fmt.pix_mp.pixelformat);
+
+ return 0;
+}
+
+static int mtk_cam_vidioc_enum_framesizes(struct file *file, void *priv,
+ struct v4l2_frmsizeenum *sizes)
+{
+ struct mtk_cam_video_device *vdev = file_to_mtk_cam_video_device(file);
+
+ if (sizes->index)
+ return -EINVAL;
+
+ if (!mtk_cam_dev_find_fmt(vdev->desc, sizes->pixel_format))
+ return -EINVAL;
+
+ sizes->type = vdev->desc->frmsizes->type;
+ memcpy(&sizes->stepwise, &vdev->desc->frmsizes->stepwise,
+ sizeof(sizes->stepwise));
+
+ return 0;
+}
+
+static const struct v4l2_ioctl_ops mtk_cam_v4l2_vcap_ioctl_ops = {
+ .vidioc_querycap = mtk_cam_vidioc_querycap,
+ .vidioc_enum_framesizes = mtk_cam_vidioc_enum_framesizes,
+ .vidioc_enum_fmt_vid_cap = mtk_cam_vidioc_enum_fmt,
+ .vidioc_g_fmt_vid_cap_mplane = mtk_cam_vidioc_g_fmt,
+ .vidioc_s_fmt_vid_cap_mplane = mtk_cam_vidioc_s_fmt,
+ .vidioc_try_fmt_vid_cap_mplane = mtk_cam_vidioc_try_fmt,
+ .vidioc_reqbufs = vb2_ioctl_reqbufs,
+ .vidioc_create_bufs = vb2_ioctl_create_bufs,
+ .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+ .vidioc_querybuf = vb2_ioctl_querybuf,
+ .vidioc_qbuf = vb2_ioctl_qbuf,
+ .vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_streamon = vb2_ioctl_streamon,
+ .vidioc_streamoff = vb2_ioctl_streamoff,
+ .vidioc_expbuf = vb2_ioctl_expbuf,
+ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+static const struct v4l2_file_operations mtk_cam_v4l2_fops = {
+ .unlocked_ioctl = video_ioctl2,
+ .open = v4l2_fh_open,
+ .release = vb2_fop_release,
+ .poll = vb2_fop_poll,
+ .mmap = vb2_fop_mmap,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl32 = v4l2_compat_ioctl32,
+#endif
+};
+
+/* -----------------------------------------------------------------------------
+ * Init & Cleanup
+ */
+
+static const u32 stream_out_fmts[] = {
+ /* The 1st entry is the default image format */
+ V4L2_PIX_FMT_SBGGR8,
+ V4L2_PIX_FMT_SGBRG8,
+ V4L2_PIX_FMT_SGRBG8,
+ V4L2_PIX_FMT_SRGGB8,
+ V4L2_PIX_FMT_UYVY,
+ V4L2_PIX_FMT_VYUY,
+ V4L2_PIX_FMT_YUYV,
+ V4L2_PIX_FMT_YVYU,
+};
+
+static const struct mtk_cam_vdev_desc video_stream = {
+ .name = "video stream",
+ .cap = V4L2_CAP_VIDEO_CAPTURE_MPLANE,
+ .buf_type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE,
+ .link_flags = MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED,
+ .fmts = stream_out_fmts,
+ .num_fmts = ARRAY_SIZE(stream_out_fmts),
+ .def_width = 1920,
+ .def_height = 1080,
+ .ioctl_ops = &mtk_cam_v4l2_vcap_ioctl_ops,
+ .frmsizes =
+ &(struct v4l2_frmsizeenum){
+ .index = 0,
+ .type = V4L2_FRMSIZE_TYPE_CONTINUOUS,
+ .stepwise = {
+ .max_width = IMG_MAX_WIDTH,
+ .min_width = IMG_MIN_WIDTH,
+ .max_height = IMG_MAX_HEIGHT,
+ .min_height = IMG_MIN_HEIGHT,
+ .step_height = 1,
+ .step_width = 1,
+ },
+ },
+};
+
+int mtk_cam_video_register(struct mtk_cam_dev *cam)
+{
+ struct device *dev = cam->dev;
+ struct mtk_cam_video_device *cam_vdev = &cam->vdev;
+ struct video_device *vdev = &cam_vdev->vdev;
+ struct vb2_queue *vbq = &cam_vdev->vbq;
+ int ret;
+
+ vb2_dma_contig_set_max_seg_size(cam->dev, DMA_BIT_MASK(32));
+
+ cam_vdev->desc = &video_stream;
+
+ /* Initialize mtk_cam_video_device */
+ mtk_cam_dev_load_default_fmt(cam);
+
+ cam_vdev->vdev_pad.flags = MEDIA_PAD_FL_SOURCE;
+
+ /* Initialize media entities */
+ ret = media_entity_pads_init(&vdev->entity, 1, &cam_vdev->vdev_pad);
+ if (ret) {
+ dev_err(dev, "failed to initialize media pad:%d\n", ret);
+ return ret;
+ }
+ cam_vdev->vdev_pad.flags = MEDIA_PAD_FL_SINK;
+
+ vbq->type = cam_vdev->desc->buf_type;
+ vbq->io_modes = VB2_MMAP | VB2_DMABUF;
+ vbq->dev = dev;
+ vbq->ops = &mtk_cam_vb2_ops;
+ vbq->mem_ops = &vb2_dma_contig_memops;
+ vbq->buf_struct_size = sizeof(struct mtk_cam_dev_buffer);
+ /*
+ * TODO: The hardware supports SOF interrupts, switch to a SOF
+ * timestamp source would give better accuracy, but first requires
+ * extending the V4L2 API to support it.
+ */
+ vbq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC
+ | V4L2_BUF_FLAG_TSTAMP_SRC_EOF;
+
+ /* No minimum buffers limitation */
+ vbq->min_buffers_needed = 0;
+ vbq->drv_priv = cam;
+
+ vbq->lock = &cam_vdev->vdev_lock;
+ ret = vb2_queue_init(vbq);
+ if (ret) {
+ dev_err(dev, "failed to init. vb2 queue:%d\n", ret);
+ goto fail_media_clean;
+ }
+
+ /* Initialize vdev */
+ snprintf(vdev->name, sizeof(vdev->name), "%s %s",
+ dev_name(dev), cam_vdev->desc->name);
+
+ /* Set cap/type/ioctl_ops of the video device */
+ vdev->device_caps = cam_vdev->desc->cap | V4L2_CAP_STREAMING
+ | V4L2_CAP_IO_MC;
+ vdev->ioctl_ops = cam_vdev->desc->ioctl_ops;
+ vdev->fops = &mtk_cam_v4l2_fops;
+ vdev->release = video_device_release_empty;
+ vdev->lock = &cam_vdev->vdev_lock;
+ vdev->v4l2_dev = cam->subdev.v4l2_dev;
+ vdev->queue = &cam_vdev->vbq;
+ vdev->vfl_dir = VFL_DIR_RX;
+ vdev->entity.function = MEDIA_ENT_F_IO_V4L;
+ vdev->entity.ops = NULL;
+ video_set_drvdata(vdev, cam);
+
+ /* Initialize miscellaneous variables */
+ mutex_init(&cam_vdev->vdev_lock);
+ INIT_LIST_HEAD(&cam->buf_list);
+
+ ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
+ if (ret) {
+ dev_err(dev, "failed to register vde:%d\n", ret);
+ goto fail_vb2_rel;
+ }
+
+ /* Create link between the video pad and the subdev pad. */
+ ret = media_create_pad_link(&cam->subdev.entity,
+ MTK_CAM_CIO_PAD_VIDEO,
+ &vdev->entity, 0, cam_vdev->desc->link_flags);
+
+ if (ret)
+ goto fail_vdev_ureg;
+
+ return 0;
+
+fail_vdev_ureg:
+ video_unregister_device(vdev);
+fail_vb2_rel:
+ mutex_destroy(&cam_vdev->vdev_lock);
+ vb2_queue_release(vbq);
+fail_media_clean:
+ media_entity_cleanup(&vdev->entity);
+
+ return ret;
+}
+
+void mtk_cam_video_unregister(struct mtk_cam_video_device *vdev)
+{
+ video_unregister_device(&vdev->vdev);
+ vb2_queue_release(&vdev->vbq);
+ media_entity_cleanup(&vdev->vdev.entity);
+ mutex_destroy(&vdev->vdev_lock);
+ vb2_dma_contig_clear_max_seg_size(&vdev->vdev.dev);
+}
--
2.43.0
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v4 5/5] arm64: dts: mediatek: mt8365: Add support for camera
2024-01-10 14:14 [PATCH v4 0/5] Add Mediatek ISP3.0 Julien Stephan
` (3 preceding siblings ...)
2024-01-10 14:14 ` [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv Julien Stephan
@ 2024-01-10 14:14 ` Julien Stephan
2024-01-11 8:32 ` Laurent Pinchart
2024-01-11 8:08 ` [PATCH v4 0/5] Add Mediatek ISP3.0 Laurent Pinchart
5 siblings, 1 reply; 28+ messages in thread
From: Julien Stephan @ 2024-01-10 14:14 UTC (permalink / raw)
Cc: Julien Stephan, Andy Hsieh, AngeloGioacchino Del Regno,
Conor Dooley, devicetree, Florian Sylvestre, Krzysztof Kozlowski,
Laurent Pinchart, linux-arm-kernel, linux-kernel, linux-mediatek,
linux-media, Louis Kuo, Matthias Brugger, Mauro Carvalho Chehab,
Paul Elder, Phi-bang Nguyen, Rob Herring
Add base support for cameras for mt8365 platforms. This requires nodes
for the sensor interface, camsv, and CSI receivers.
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
---
arch/arm64/boot/dts/mediatek/mt8365.dtsi | 128 +++++++++++++++++++++++
1 file changed, 128 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
index 24581f7410aa..9059b2f83b83 100644
--- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/mediatek,mt8365-power.h>
+#include <dt-bindings/memory/mediatek,mt8365-larb-port.h>
/ {
compatible = "mediatek,mt8365";
@@ -703,6 +704,133 @@ ethernet: ethernet@112a0000 {
status = "disabled";
};
+ camsv1: camsv@15050000 {
+ compatible = "mediatek,mt8365-camsv";
+ reg = <0 0x15050000 0 0x0040>,
+ <0 0x15050208 0 0x0020>,
+ <0 0x15050400 0 0x0100>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&camsys CLK_CAM>,
+ <&camsys CLK_CAMTG>,
+ <&camsys CLK_CAMSV0>;
+ clock-names = "cam", "camtg", "camsv";
+ iommus = <&iommu M4U_PORT_CAM_IMGO>;
+ mediatek,larb = <&larb2>;
+ power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ camsv1_endpoint: endpoint {
+ remote-endpoint =
+ <&seninf_camsv1_endpoint>;
+ };
+ };
+ };
+ };
+
+ camsv2: camsv@15050800 {
+ compatible = "mediatek,mt8365-camsv";
+ reg = <0 0x15050800 0 0x0040>,
+ <0 0x15050228 0 0x0020>,
+ <0 0x15050C00 0 0x0100>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&camsys CLK_CAM>,
+ <&camsys CLK_CAMTG>,
+ <&camsys CLK_CAMSV1>;
+ clock-names = "cam", "camtg", "camsv";
+ iommus = <&iommu M4U_PORT_CAM_IMGO>;
+
+ mediatek,larb = <&larb2>;
+ power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ camsv2_endpoint: endpoint {
+ remote-endpoint =
+ <&seninf_camsv2_endpoint>;
+ };
+ };
+ };
+ };
+
+ seninf: seninf@15040000 {
+ compatible = "mediatek,mt8365-seninf";
+ reg = <0 0x15040000 0 0x6000>;
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&camsys CLK_CAM_SENIF>,
+ <&topckgen CLK_TOP_SENIF_SEL>;
+ clock-names = "camsys", "top_mux";
+
+ power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
+
+ phys = <&mipi_csi0 PHY_TYPE_DPHY>, <&mipi_csi1>;
+ phy-names = "csi0", "csi1";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ seninf_camsv1_endpoint: endpoint {
+ remote-endpoint =
+ <&camsv1_endpoint>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ seninf_camsv2_endpoint: endpoint {
+ remote-endpoint =
+ <&camsv2_endpoint>;
+ };
+ };
+ };
+ };
+
+ mipi_csi0: mipi-csi0@11c10000 {
+ compatible = "mediatek,mt8365-csi-rx";
+ reg = <0 0x11C10000 0 0x2000>;
+ status = "disabled";
+ num-lanes = <4>;
+ #phy-cells = <1>;
+ };
+
+ mipi_csi1: mipi-csi1@11c12000 {
+ compatible = "mediatek,mt8365-csi-rx";
+ reg = <0 0x11C12000 0 0x2000>;
+ phy-type = <PHY_TYPE_DPHY>;
+ status = "disabled";
+ num-lanes = <4>;
+ #phy-cells = <0>;
+ };
+
u3phy: t-phy@11cc0000 {
compatible = "mediatek,mt8365-tphy", "mediatek,generic-tphy-v2";
#address-cells = <1>;
--
2.43.0
^ permalink raw reply related [flat|nested] 28+ messages in thread
* Re: [PATCH v4 3/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 sensor interface
2024-01-10 14:14 ` [PATCH v4 3/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 sensor interface Julien Stephan
@ 2024-01-11 2:46 ` CK Hu (胡俊光)
2024-01-11 12:04 ` AngeloGioacchino Del Regno
` (2 subsequent siblings)
3 siblings, 0 replies; 28+ messages in thread
From: CK Hu (胡俊光) @ 2024-01-11 2:46 UTC (permalink / raw)
To: jstephan
Cc: linux-kernel, linux-mediatek, robh+dt, linux-media, devicetree,
paul.elder, mchehab, conor+dt,
Andy Hsieh (謝智皓),
Louis Kuo (郭德寧),
krzysztof.kozlowski+dt, linux-arm-kernel, laurent.pinchart,
fsylvestre, matthias.bgg, angelogioacchino.delregno, pnguyen
Hi, Julien:
On Wed, 2024-01-10 at 15:14 +0100, Julien Stephan wrote:
>
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> From: Louis Kuo <louis.kuo@mediatek.com>
>
> This will add the mediatek ISP3.0 seninf (sensor interface) driver
> found
> on several Mediatek SoCs such as the mt8365.
>
> Then seninf module has 4 physical CSI-2 inputs. Depending on the soc
> they
> may not be all connected.
>
> Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
> Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
> MAINTAINERS | 1 +
> drivers/media/platform/mediatek/Kconfig | 1 +
> drivers/media/platform/mediatek/Makefile | 1 +
> drivers/media/platform/mediatek/isp/Kconfig | 2 +
> drivers/media/platform/mediatek/isp/Makefile | 3 +
> .../platform/mediatek/isp/isp_30/Kconfig | 16 +
> .../platform/mediatek/isp/isp_30/Makefile | 3 +
> .../mediatek/isp/isp_30/seninf/Makefile | 5 +
> .../mediatek/isp/isp_30/seninf/mtk_seninf.c | 1488
> +++++++++++++++++
> .../isp/isp_30/seninf/mtk_seninf_reg.h | 112 ++
>
I think you could put mtk_seninf.c and mtk_seninf_reg.h in
drivers/media/platform/mediatek/isp. The seninf driver has only two
files, so it's not necessary to create a folder 'seninf' for only two
files. And for isp_30, we have no any information how many difference
with other isp_xx, for example isp_40, if seninf driver in isp_30 and
in isp_40 has only 10% difference, it's not necessary to duplicate the
90% common code in different folder. So initially, just place the
seninf driver in mediatek/isp folder. When other SoC seninf driver
upstream, we would have enough information to decide to generate new
file or new folder for new SoC.
Regards,
CK
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 0/5] Add Mediatek ISP3.0
2024-01-10 14:14 [PATCH v4 0/5] Add Mediatek ISP3.0 Julien Stephan
` (4 preceding siblings ...)
2024-01-10 14:14 ` [PATCH v4 5/5] arm64: dts: mediatek: mt8365: Add support for camera Julien Stephan
@ 2024-01-11 8:08 ` Laurent Pinchart
5 siblings, 0 replies; 28+ messages in thread
From: Laurent Pinchart @ 2024-01-11 8:08 UTC (permalink / raw)
To: Julien Stephan
Cc: Andy Hsieh, AngeloGioacchino Del Regno, Conor Dooley, devicetree,
Florian Sylvestre, Krzysztof Kozlowski, linux-arm-kernel,
linux-kernel, linux-mediatek, linux-media, Louis Kuo,
Matthias Brugger, Mauro Carvalho Chehab, Paul Elder,
Phi-bang Nguyen, Rob Herring
Hi Julien,
Thank you for the patches.
On Wed, Jan 10, 2024 at 03:14:37PM +0100, Julien Stephan wrote:
> This series adds the support of the Mediatek ISP3.0 found on some
> Mediatek SoCs such as the mt8365. The driver is divided into 2 parts:
>
> * SENINF: the sensor interface
> * CAMSV: this driver provides a path to bypass the SoC ISP so that image
> data coming from the SENINF can go directly into memory without any
> image processing. This allows the use of an external ISP or camera
> sensor directly.
I'm afraid this doesn't compile based on the latest media tree's master
branch, scheduled for v6.8-rc1. I've pushed the following fixes to [1]:
0d2e75fb8909 media: mediatek: isp_30: Update to new subdev state API
05dc498f151a media: mediatek: isp_30: Update to new subdev state API
You can squash those in v5 when you will rebase on v6.8-rc1.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git/log/?h=mtk/v6.8/pumpkin/camera
> The SENINF driver is based on previous work done by Louis Kuo available
> as an RFC here: https://lore.kernel.org/all/20200708104023.3225-1-louis.kuo@mediatek.com/
>
> This series depends on the following series for the phy [1]
>
> Changes in v4:
> - fix suspend/resume deadlock
> - fix various locking issues reported by Laurent Pinchart on v3
> - run LOCKDEP
> - add missing include reported by kernel-test-robot for non mediatek arch and COMPILE_TEST=y
> - use atomic poll inside mtk_camsv30_setup
> - drop second lane support as it was not used
> - remove useless members in structs
> - fix media entity initialization
> - initialize correct pad for camsv video device
> - add isp support in mt8365.dtsi
> - rebase on 6.7
>
> Changes in v3:
> - fix a lot of formatting issues/coding style issues found in camsv/seninf reported by Angelo on v2
> - fix camsv/seninf binding file error reported by Rob
>
> Changes in v2:
> - renamed clock `cam_seninf` to `camsys`
> - renamed clock `top_mux_seninf` to `top_mux`
> - moved phy properties from port nodes to top level
> - remove patternProperties
> - specify power management dependency in the cover letter description to fix
> missing include in dt-binding example
> - change '$ref' properties on some endpoint nodes from
> '$ref: video-interfaces.yaml#' to '$ref: /schemas/graph.yaml#/$defs/endpoint-base'
> where applicable
>
> Best
> Julien Stephan
>
> [1] : https://lore.kernel.org/all/20230620121928.1231745-1-jstephan@baylibre.com/
>
>
>
> Louis Kuo (2):
> dt-bindings: media: add mediatek ISP3.0 sensor interface
> media: platform: mediatek: isp_30: add mediatek ISP3.0 sensor
> interface
>
> Phi-bang Nguyen (2):
> dt-bindings: media: add mediatek ISP3.0 camsv
> media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv
>
> .../bindings/media/mediatek,mt8365-camsv.yaml | 109 ++
> .../media/mediatek,mt8365-seninf.yaml | 259 +++
> MAINTAINERS | 10 +
> arch/arm64/boot/dts/mediatek/mt8365.dtsi | 128 ++
> drivers/media/platform/mediatek/Kconfig | 1 +
> drivers/media/platform/mediatek/Makefile | 1 +
> drivers/media/platform/mediatek/isp/Kconfig | 2 +
> drivers/media/platform/mediatek/isp/Makefile | 3 +
> .../platform/mediatek/isp/isp_30/Kconfig | 35 +
> .../platform/mediatek/isp/isp_30/Makefile | 4 +
> .../mediatek/isp/isp_30/camsv/Makefile | 7 +
> .../mediatek/isp/isp_30/camsv/mtk_camsv.c | 328 ++++
> .../mediatek/isp/isp_30/camsv/mtk_camsv.h | 199 +++
> .../isp/isp_30/camsv/mtk_camsv30_hw.c | 427 +++++
> .../isp/isp_30/camsv/mtk_camsv30_regs.h | 60 +
> .../isp/isp_30/camsv/mtk_camsv_video.c | 774 +++++++++
> .../mediatek/isp/isp_30/seninf/Makefile | 5 +
> .../mediatek/isp/isp_30/seninf/mtk_seninf.c | 1488 +++++++++++++++++
> .../isp/isp_30/seninf/mtk_seninf_reg.h | 112 ++
> 19 files changed, 3952 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
> create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
> create mode 100644 drivers/media/platform/mediatek/isp/Kconfig
> create mode 100644 drivers/media/platform/mediatek/isp/Makefile
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/Kconfig
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/Makefile
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/Makefile
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.c
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.h
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_hw.c
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_regs.h
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv_video.c
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 1/5] dt-bindings: media: add mediatek ISP3.0 sensor interface
2024-01-10 14:14 ` [PATCH v4 1/5] dt-bindings: media: add mediatek ISP3.0 sensor interface Julien Stephan
@ 2024-01-11 8:15 ` Laurent Pinchart
2024-01-12 7:32 ` Krzysztof Kozlowski
1 sibling, 0 replies; 28+ messages in thread
From: Laurent Pinchart @ 2024-01-11 8:15 UTC (permalink / raw)
To: Julien Stephan
Cc: Louis Kuo, Phi-Bang Nguyen, Andy Hsieh,
AngeloGioacchino Del Regno, Conor Dooley, devicetree,
Florian Sylvestre, Krzysztof Kozlowski, linux-arm-kernel,
linux-kernel, linux-mediatek, linux-media, Matthias Brugger,
Mauro Carvalho Chehab, Paul Elder, Rob Herring
Hi Julien,
Thank you for the patch.
On Wed, Jan 10, 2024 at 03:14:38PM +0100, Julien Stephan wrote:
> From: Louis Kuo <louis.kuo@mediatek.com>
>
> This adds the bindings, for the mediatek ISP3.0 SENINF module embedded in
> some Mediatek SoC, such as the mt8365
>
> Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
> Signed-off-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> Link: https://lore.kernel.org/r/20230807094940.329165-2-jstephan@baylibre.com
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> .../media/mediatek,mt8365-seninf.yaml | 259 ++++++++++++++++++
> MAINTAINERS | 7 +
> 2 files changed, 266 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
> new file mode 100644
> index 000000000000..0a7b7d949df7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
> @@ -0,0 +1,259 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2023 MediaTek, BayLibre
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/mediatek,mt8365-seninf.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek Sensor Interface 3.0
> +
> +maintainers:
> + - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> + - Julien Stephan <jstephan@baylibre.com>
> + - Andy Hsieh <andy.hsieh@mediatek.com>
> +
> +description:
> + The ISP3.0 SENINF is the CSI-2 and parallel camera sensor interface found in
> + multiple MediaTek SoCs. It can support up to three physical CSI-2
> + input ports, configured in DPHY (2 or 4 data lanes) or CPHY depending on the soc.
s/soc/SoC/
And while at it, you can reflow the text to 80 columns.
> + On the output side, SENINF can be connected either to CAMSV instance or
> + to the internal ISP. CAMSV is used to bypass the internal ISP processing
> + in order to connect either an external ISP, or a sensor (RAW, YUV).
> +
> +properties:
> + compatible:
> + const: mediatek,mt8365-seninf
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + power-domains:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: Seninf camsys clock
> + - description: Seninf top mux clock
> +
> + clock-names:
> + items:
> + - const: camsys
> + - const: top_mux
> +
> + phys:
> + minItems: 1
> + maxItems: 4
> + description:
> + phandle to the PHYs connected to CSI0/A, CSI1, CSI2 and CSI0B
> +
> + phy-names:
> + minItems: 1
> + items:
> + - const: csi0
> + - const: csi1
> + - const: csi2
> + - const: csi0b
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: CSI0 or CSI0A port
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: CSI1 port
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + port@2:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: CSI2 port
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + port@3:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: CSI0B port
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> + data-lanes:
> + minItems: 1
> + maxItems: 2
> +
> + port@4:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: connection point for cam0
> +
> + port@5:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: connection point for cam1
> +
> + port@6:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: connection point for camsv0
> +
> + port@7:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: connection point for camsv1
> +
> + port@8:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: connection point for camsv2
> +
> + port@9:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: connection point for camsv3
> +
> + required:
> + - port@0
> + - port@1
> + - port@2
> + - port@3
> + - port@4
> + - port@5
> + - port@6
> + - port@7
> + - port@8
> + - port@9
> +
> +required:
> + - compatible
> + - interrupts
> + - clocks
> + - clock-names
> + - power-domains
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mediatek,mt8365-clk.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/phy/phy.h>
> + #include <dt-bindings/power/mediatek,mt8365-power.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + seninf: seninf@15040000 {
> + compatible = "mediatek,mt8365-seninf";
> + reg = <0 0x15040000 0 0x6000>;
> + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&camsys CLK_CAM_SENIF>,
> + <&topckgen CLK_TOP_SENIF_SEL>;
> + clock-names = "camsys", "top_mux";
> +
> + power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
> +
> + phys = <&mipi_csi0 PHY_TYPE_DPHY>;
> + phy-names = "csi0";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + seninf_in1: endpoint {
> + clock-lanes = <2>;
> + data-lanes = <1 3 0 4>;
> + remote-endpoint = <&isp1_out>;
Indentation issue, you need two more spaces here.
With these small issues fixed,
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + };
> +
> + port@2 {
> + reg = <2>;
> + };
> +
> + port@3 {
> + reg = <3>;
> + };
> +
> + port@4 {
> + reg = <4>;
> + seninf_camsv1_endpoint: endpoint {
> + remote-endpoint = <&camsv1_endpoint>;
> + };
> + };
> +
> + port@5 {
> + reg = <5>;
> + };
> +
> + port@6 {
> + reg = <6>;
> + };
> +
> + port@7 {
> + reg = <7>;
> + };
> +
> + port@8 {
> + reg = <8>;
> + };
> +
> + port@9 {
> + reg = <9>;
> + };
> +
> + };
> + };
> + };
> +
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 41e0862cfa7d..4444e719cf8e 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13611,6 +13611,13 @@ M: Sean Wang <sean.wang@mediatek.com>
> S: Maintained
> F: drivers/char/hw_random/mtk-rng.c
>
> +MEDIATEK ISP3.0 DRIVER
> +M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> +M: Julien Stephan <jstephan@baylibre.com>
> +M: Andy Hsieh <andy.hsieh@mediatek.com>
> +S: Supported
> +F: Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
> +
> MEDIATEK SMI DRIVER
> M: Yong Wu <yong.wu@mediatek.com>
> L: linux-mediatek@lists.infradead.org (moderated for non-subscribers)
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 5/5] arm64: dts: mediatek: mt8365: Add support for camera
2024-01-10 14:14 ` [PATCH v4 5/5] arm64: dts: mediatek: mt8365: Add support for camera Julien Stephan
@ 2024-01-11 8:32 ` Laurent Pinchart
0 siblings, 0 replies; 28+ messages in thread
From: Laurent Pinchart @ 2024-01-11 8:32 UTC (permalink / raw)
To: Julien Stephan
Cc: Andy Hsieh, AngeloGioacchino Del Regno, Conor Dooley, devicetree,
Florian Sylvestre, Krzysztof Kozlowski, linux-arm-kernel,
linux-kernel, linux-mediatek, linux-media, Louis Kuo,
Matthias Brugger, Mauro Carvalho Chehab, Paul Elder,
Phi-bang Nguyen, Rob Herring
Hi Julien,
Thank you for the patch.
On Wed, Jan 10, 2024 at 03:14:42PM +0100, Julien Stephan wrote:
> Add base support for cameras for mt8365 platforms. This requires nodes
> for the sensor interface, camsv, and CSI receivers.
>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
> arch/arm64/boot/dts/mediatek/mt8365.dtsi | 128 +++++++++++++++++++++++
> 1 file changed, 128 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> index 24581f7410aa..9059b2f83b83 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> @@ -10,6 +10,7 @@
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/phy/phy.h>
> #include <dt-bindings/power/mediatek,mt8365-power.h>
> +#include <dt-bindings/memory/mediatek,mt8365-larb-port.h>
>
> / {
> compatible = "mediatek,mt8365";
> @@ -703,6 +704,133 @@ ethernet: ethernet@112a0000 {
> status = "disabled";
> };
>
> + camsv1: camsv@15050000 {
> + compatible = "mediatek,mt8365-camsv";
> + reg = <0 0x15050000 0 0x0040>,
> + <0 0x15050208 0 0x0020>,
> + <0 0x15050400 0 0x0100>;
> + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&camsys CLK_CAM>,
> + <&camsys CLK_CAMTG>,
> + <&camsys CLK_CAMSV0>;
> + clock-names = "cam", "camtg", "camsv";
> + iommus = <&iommu M4U_PORT_CAM_IMGO>;
> + mediatek,larb = <&larb2>;
> + power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port@0 {
> + reg = <0>;
> + camsv1_endpoint: endpoint {
> + remote-endpoint =
> + <&seninf_camsv1_endpoint>;
I think you can keep this on a single line. Same below.
> + };
> + };
> + };
> + };
> +
> + camsv2: camsv@15050800 {
> + compatible = "mediatek,mt8365-camsv";
> + reg = <0 0x15050800 0 0x0040>,
> + <0 0x15050228 0 0x0020>,
> + <0 0x15050C00 0 0x0100>;
Lower-case hex constants.
> + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&camsys CLK_CAM>,
> + <&camsys CLK_CAMTG>,
> + <&camsys CLK_CAMSV1>;
> + clock-names = "cam", "camtg", "camsv";
> + iommus = <&iommu M4U_PORT_CAM_IMGO>;
> +
Nitpicking, camsv doesn't have a blank line here. I'm fine either way,
but please do the same for both nodes.
> + mediatek,larb = <&larb2>;
> + power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port@0 {
> + reg = <0>;
> + camsv2_endpoint: endpoint {
> + remote-endpoint =
> + <&seninf_camsv2_endpoint>;
> + };
> + };
> + };
> + };
> +
> + seninf: seninf@15040000 {
This should go before the two camsv instances to keep nodes sorted by
address. The camsv1, camsv2 and seninf nodes need to be moved further
down for the same reason.
> + compatible = "mediatek,mt8365-seninf";
> + reg = <0 0x15040000 0 0x6000>;
> + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&camsys CLK_CAM_SENIF>,
> + <&topckgen CLK_TOP_SENIF_SEL>;
> + clock-names = "camsys", "top_mux";
> +
> + power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
> +
> + phys = <&mipi_csi0 PHY_TYPE_DPHY>, <&mipi_csi1>;
> + phy-names = "csi0", "csi1";
> +
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + };
> +
> + port@1 {
> + reg = <1>;
> + };
> +
> + port@2 {
> + reg = <2>;
> + };
> +
> + port@3 {
> + reg = <3>;
> + };
> +
> + port@4 {
> + reg = <4>;
> + seninf_camsv1_endpoint: endpoint {
> + remote-endpoint =
> + <&camsv1_endpoint>;
> + };
> + };
> +
> + port@5 {
> + reg = <5>;
> + seninf_camsv2_endpoint: endpoint {
> + remote-endpoint =
> + <&camsv2_endpoint>;
> + };
> + };
> + };
> + };
> +
> + mipi_csi0: mipi-csi0@11c10000 {
> + compatible = "mediatek,mt8365-csi-rx";
> + reg = <0 0x11C10000 0 0x2000>;
Lower-case hex constants.
> + status = "disabled";
> + num-lanes = <4>;
> + #phy-cells = <1>;
> + };
> +
> + mipi_csi1: mipi-csi1@11c12000 {
> + compatible = "mediatek,mt8365-csi-rx";
> + reg = <0 0x11C12000 0 0x2000>;
Lower-case hex constants.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> + phy-type = <PHY_TYPE_DPHY>;
> + status = "disabled";
> + num-lanes = <4>;
> + #phy-cells = <0>;
> + };
> +
> u3phy: t-phy@11cc0000 {
> compatible = "mediatek,mt8365-tphy", "mediatek,generic-tphy-v2";
> #address-cells = <1>;
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 3/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 sensor interface
2024-01-10 14:14 ` [PATCH v4 3/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 sensor interface Julien Stephan
2024-01-11 2:46 ` CK Hu (胡俊光)
@ 2024-01-11 12:04 ` AngeloGioacchino Del Regno
2024-02-12 15:07 ` Julien Stephan
2024-02-15 9:21 ` Sakari Ailus
2024-03-20 9:04 ` CK Hu (胡俊光)
3 siblings, 1 reply; 28+ messages in thread
From: AngeloGioacchino Del Regno @ 2024-01-11 12:04 UTC (permalink / raw)
To: Julien Stephan
Cc: Louis Kuo, Phi-bang Nguyen, Florian Sylvestre, Laurent Pinchart,
Andy Hsieh, Conor Dooley, devicetree, Krzysztof Kozlowski,
linux-arm-kernel, linux-kernel, linux-mediatek, linux-media,
Matthias Brugger, Mauro Carvalho Chehab, Paul Elder, Rob Herring
Il 10/01/24 15:14, Julien Stephan ha scritto:
> From: Louis Kuo <louis.kuo@mediatek.com>
>
> This will add the mediatek ISP3.0 seninf (sensor interface) driver found
> on several Mediatek SoCs such as the mt8365.
>
> Then seninf module has 4 physical CSI-2 inputs. Depending on the soc they
> may not be all connected.
>
> Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
> Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
> MAINTAINERS | 1 +
> drivers/media/platform/mediatek/Kconfig | 1 +
> drivers/media/platform/mediatek/Makefile | 1 +
> drivers/media/platform/mediatek/isp/Kconfig | 2 +
> drivers/media/platform/mediatek/isp/Makefile | 3 +
> .../platform/mediatek/isp/isp_30/Kconfig | 16 +
> .../platform/mediatek/isp/isp_30/Makefile | 3 +
> .../mediatek/isp/isp_30/seninf/Makefile | 5 +
> .../mediatek/isp/isp_30/seninf/mtk_seninf.c | 1488 +++++++++++++++++
> .../isp/isp_30/seninf/mtk_seninf_reg.h | 112 ++
> 10 files changed, 1632 insertions(+)
> create mode 100644 drivers/media/platform/mediatek/isp/Kconfig
> create mode 100644 drivers/media/platform/mediatek/isp/Makefile
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/Kconfig
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/Makefile
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3ea2158864e1..52d200d5e36c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13618,6 +13618,7 @@ M: Andy Hsieh <andy.hsieh@mediatek.com>
> S: Supported
> F: Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
> F: Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
> +F: drivers/media/platform/mediatek/isp/isp_30/seninf/*
>
> MEDIATEK SMI DRIVER
> M: Yong Wu <yong.wu@mediatek.com>
> diff --git a/drivers/media/platform/mediatek/Kconfig b/drivers/media/platform/mediatek/Kconfig
> index 84104e2cd024..4e0a5a43f35e 100644
> --- a/drivers/media/platform/mediatek/Kconfig
> +++ b/drivers/media/platform/mediatek/Kconfig
> @@ -7,3 +7,4 @@ source "drivers/media/platform/mediatek/mdp/Kconfig"
> source "drivers/media/platform/mediatek/vcodec/Kconfig"
> source "drivers/media/platform/mediatek/vpu/Kconfig"
> source "drivers/media/platform/mediatek/mdp3/Kconfig"
> +source "drivers/media/platform/mediatek/isp/Kconfig"
> diff --git a/drivers/media/platform/mediatek/Makefile b/drivers/media/platform/mediatek/Makefile
> index 38e6ba917fe5..695f05f525a6 100644
> --- a/drivers/media/platform/mediatek/Makefile
> +++ b/drivers/media/platform/mediatek/Makefile
> @@ -4,3 +4,4 @@ obj-y += mdp/
> obj-y += vcodec/
> obj-y += vpu/
> obj-y += mdp3/
> +obj-y += isp/
> diff --git a/drivers/media/platform/mediatek/isp/Kconfig b/drivers/media/platform/mediatek/isp/Kconfig
> new file mode 100644
> index 000000000000..708b9a6660d2
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/Kconfig
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +source "drivers/media/platform/mediatek/isp/isp_30/Kconfig"
> diff --git a/drivers/media/platform/mediatek/isp/Makefile b/drivers/media/platform/mediatek/isp/Makefile
> new file mode 100644
> index 000000000000..a81ab33d0dd3
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +
> +obj-y += isp_30/
> diff --git a/drivers/media/platform/mediatek/isp/isp_30/Kconfig b/drivers/media/platform/mediatek/isp/isp_30/Kconfig
> new file mode 100644
> index 000000000000..9791312589fb
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/isp_30/Kconfig
> @@ -0,0 +1,16 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +config MTK_SENINF30
> + tristate "MediaTek ISP3.0 SENINF driver"
> + depends on VIDEO_V4L2_SUBDEV_API
> + depends on MEDIA_CAMERA_SUPPORT
> + depends on ARCH_MEDIATEK || COMPILE_TEST
> + depends on OF
> + select V4L2_FWNODE
> + default n
> + help
> + This driver provides a MIPI CSI-2 receiver interface to connect
> + an external camera module with MediaTek ISP3.0. It is able to handle
> + multiple cameras at the same time.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called mtk-seninf.
> diff --git a/drivers/media/platform/mediatek/isp/isp_30/Makefile b/drivers/media/platform/mediatek/isp/isp_30/Makefile
> new file mode 100644
> index 000000000000..ac3142de4739
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/isp_30/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +obj-$(CONFIG_MTK_SENINF30) += seninf/
> diff --git a/drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile b/drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile
> new file mode 100644
> index 000000000000..f28480d6d6c3
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile
> @@ -0,0 +1,5 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +mtk-seninf-objs += mtk_seninf.o
> +
> +obj-$(CONFIG_MTK_SENINF30) += mtk-seninf.o
> diff --git a/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c
> new file mode 100644
> index 000000000000..67b2c697d9ca
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c
> @@ -0,0 +1,1488 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2022 MediaTek Inc.
> + */
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/of_graph.h>
> +#include <linux/of_platform.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/videodev2.h>
> +#include <media/media-device.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-common.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-dev.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-mc.h>
> +#include <media/v4l2-subdev.h>
> +
> +#include "mtk_seninf_reg.h"
> +
> +#define SENINF_TIMESTAMP_STEP 0x67
> +#define SENINF_SETTLE_DELAY 0x15
> +#define SENINF_HS_TRAIL_PARAMETER 0x8
> +
> +#define SENINF_MAX_NUM_INPUTS 4
> +#define SENINF_MAX_NUM_OUTPUTS 6
> +#define SENINF_MAX_NUM_MUXES 6
> +#define SENINF_MAX_NUM_PADS (SENINF_MAX_NUM_INPUTS + \
> + SENINF_MAX_NUM_OUTPUTS)
> +
> +#define SENINF_DEFAULT_BUS_FMT MEDIA_BUS_FMT_SGRBG10_1X10
> +#define SENINF_DEFAULT_WIDTH 1920
> +#define SENINF_DEFAULT_HEIGHT 1080
> +
> +#define SENINF_PAD_10BIT 0
> +
> +#define SENINF_TEST_MODEL 0
> +#define SENINF_NORMAL_MODEL 1
> +#define SENINF_ALL_ERR_IRQ_EN 0x7f
> +#define SENINF_IRQ_CLR_SEL 0x80000000
> +
> +#define SENINF_MIPI_SENSOR 0x8
> +
> +#define MTK_CSI_MAX_LANES 4
> +
> +/* Port number in the device tree. */
> +enum mtk_seninf_port {
> + CSI_PORT_0 = 0, /* 4D1C or 2D1C */
> + CSI_PORT_1, /* 4D1C */
> + CSI_PORT_2, /* 4D1C */
> + CSI_PORT_0B, /* 2D1C */
> +};
> +
> +enum mtk_seninf_id {
> + SENINF_1 = 0,
> + SENINF_2 = 1,
> + SENINF_3 = 2,
> + SENINF_5 = 4,
> +};
> +
> +static const u32 port_to_seninf_id[] = {
> + [CSI_PORT_0] = SENINF_1,
> + [CSI_PORT_1] = SENINF_3,
> + [CSI_PORT_2] = SENINF_5,
> + [CSI_PORT_0B] = SENINF_2,
> +};
> +
> +enum mtk_seninf_phy_mode {
> + SENINF_PHY_MODE_NONE,
> + SENINF_PHY_MODE_4D1C,
> + SENINF_PHY_MODE_2D1C,
> +};
> +
> +enum mtk_seninf_format_flag {
> + MTK_SENINF_FORMAT_BAYER = BIT(0),
> + MTK_SENINF_FORMAT_DPCM = BIT(1),
> + MTK_SENINF_FORMAT_JPEG = BIT(2),
> + MTK_SENINF_FORMAT_INPUT_ONLY = BIT(3),
> +};
> +
> +/**
> + * struct mtk_seninf_conf - Model-specific SENINF parameters
> + * @model: Model description
> + * @nb_inputs: Number of SENINF inputs
> + * @nb_muxes: Number of SENINF MUX (FIFO) instances
> + * @nb_outputs: Number of outputs (to CAM and CAMSV instances)
> + */
> +struct mtk_seninf_conf {
> + const char *model;
> + u8 nb_inputs;
> + u8 nb_muxes;
> + u8 nb_outputs;
> +};
> +
> +/**
> + * struct mtk_seninf_format_info - Information about media bus formats
> + * @code: V4L2 media bus code
> + * @flags: Flags describing the format, as a combination of MTK_SENINF_FORMAT_*
> + */
> +struct mtk_seninf_format_info {
> + u32 code;
> + u32 flags;
> +};
> +
> +/**
> + * struct mtk_seninf_input - SENINF input block
> + * @pad: DT port and media entity pad number
> + * @seninf_id: SENINF hardware instance ID
> + * @base: Memory mapped I/O based address
> + * @seninf: Back pointer to the mtk_seninf
> + * @phy: PHY connected to the input
> + * @phy_mode: PHY operation mode (NONE when the input is not connected)
> + * @bus: CSI-2 bus configuration from DT
> + * @source_sd: Source subdev connected to the input
> + */
> +struct mtk_seninf_input {
> + enum mtk_seninf_port pad;
> + enum mtk_seninf_id seninf_id;
> + void __iomem *base;
> + struct mtk_seninf *seninf;
> +
> + struct phy *phy;
> + enum mtk_seninf_phy_mode phy_mode;
> +
> + struct v4l2_mbus_config_mipi_csi2 bus;
> +
> + struct v4l2_subdev *source_sd;
> +};
> +
> +/**
> + * struct mtk_seninf_mux - SENINF MUX channel
> + * @pad: DT port and media entity pad number
> + * @mux_id: MUX hardware instance ID
> + * @base: Memory mapped I/O based address
> + * @seninf: Back pointer to the mtk_seninf
> + */
> +struct mtk_seninf_mux {
> + unsigned int pad;
> + unsigned int mux_id;
> + void __iomem *base;
> + struct mtk_seninf *seninf;
> +};
> +
> +/**
> + * struct mtk_seninf - Top-level SENINF device
> + * @dev: The (platform) device
> + * @phy: PHYs at the SENINF inputs
> + * @num_clks: Number of clocks in the clks array
> + * @clks: Clocks
> + * @base: Memory mapped I/O base address
> + * @media_dev: Media controller device
> + * @v4l2_dev: V4L2 device
> + * @subdev: V4L2 subdevice
> + * @pads: Media entity pads
> + * @notifier: V4L2 async notifier for source subdevs
> + * @ctrl_handler: V4L2 controls handler
> + * @source_format: Active format on the source pad
> + * @inputs: Array of SENINF inputs
> + * @muxes: Array of MUXes
> + * @conf: Model-specific SENINF parameters
> + * @is_testmode: Whether or not the test pattern generator is enabled
> + */
> +struct mtk_seninf {
> + struct device *dev;
> + struct phy *phy[5];
> + unsigned int num_clks;
> + struct clk_bulk_data *clks;
> + void __iomem *base;
> +
> + struct media_device media_dev;
> + struct v4l2_device v4l2_dev;
> + struct v4l2_subdev subdev;
> + struct media_pad pads[SENINF_MAX_NUM_PADS];
> + struct v4l2_async_notifier notifier;
> + struct v4l2_ctrl_handler ctrl_handler;
> +
> + struct mtk_seninf_input inputs[SENINF_MAX_NUM_INPUTS];
> + struct mtk_seninf_mux muxes[SENINF_MAX_NUM_MUXES];
> +
> + const struct mtk_seninf_conf *conf;
> +
> + bool is_testmode;
> +};
> +
> +inline struct mtk_seninf *sd_to_mtk_seninf(struct v4l2_subdev *sd)
> +{
> + return container_of(sd, struct mtk_seninf, subdev);
> +}
> +
> +static inline bool mtk_seninf_pad_is_sink(struct mtk_seninf *priv,
> + unsigned int pad)
> +{
> + return pad < priv->conf->nb_inputs;
> +}
> +
> +static inline bool mtk_seninf_pad_is_source(struct mtk_seninf *priv,
> + unsigned int pad)
> +{
> + return !mtk_seninf_pad_is_sink(priv, pad);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Formats
> + */
> +
> +static const struct mtk_seninf_format_info mtk_seninf_formats[] = {
> + {
> + .code = MEDIA_BUS_FMT_SBGGR8_1X8,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SGBRG8_1X8,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SGRBG8_1X8,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SRGGB8_1X8,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SGRBG10_1X10,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SRGGB10_1X10,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SBGGR10_1X10,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SGBRG10_1X10,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SBGGR12_1X12,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SGBRG12_1X12,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SGRBG12_1X12,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SRGGB12_1X12,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SBGGR14_1X14,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SGBRG14_1X14,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SGRBG14_1X14,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SRGGB14_1X14,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SBGGR16_1X16,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SGBRG16_1X16,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SGRBG16_1X16,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SRGGB16_1X16,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_UYVY8_1X16,
> + }, {
> + .code = MEDIA_BUS_FMT_VYUY8_1X16,
> + }, {
> + .code = MEDIA_BUS_FMT_YUYV8_1X16,
> + }, {
> + .code = MEDIA_BUS_FMT_YVYU8_1X16,
> + }, {
> + .code = MEDIA_BUS_FMT_JPEG_1X8,
> + .flags = MTK_SENINF_FORMAT_JPEG,
> + }, {
> + .code = MEDIA_BUS_FMT_S5C_UYVY_JPEG_1X8,
> + .flags = MTK_SENINF_FORMAT_JPEG,
> + },
> + /* Keep the input-only formats last. */
Your comment doesn't make me understand why input-only formats shall be
placed last - and makes me think that having two arrays (one for both
and one for input only) would be easier and less error prone, other than
making you able to drop the MTK_SENINF_FORMAT_INPUT_ONLY flag entirely.
> + {
> + .code = MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8,
> + .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY,
> + }, {
> + .code = MEDIA_BUS_FMT_SRGGB10_DPCM8_1X8,
> + .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY,
> + }, {
> + .code = MEDIA_BUS_FMT_SBGGR10_DPCM8_1X8,
> + .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY,
> + }, {
> + .code = MEDIA_BUS_FMT_SGBRG10_DPCM8_1X8,
> + .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY,
> + }
> +};
> +
> +static const struct mtk_seninf_format_info *mtk_seninf_format_info(u32 code)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(mtk_seninf_formats); ++i) {
> + if (mtk_seninf_formats[i].code == code)
> + return &mtk_seninf_formats[i];
> + }
> +
> + return NULL;
> +}
> +
..snip..
> +
> +static void mtk_seninf_input_setup_csi2(struct mtk_seninf_input *input,
> + struct v4l2_subdev_state *state)
> +{
> + const struct mtk_seninf_format_info *fmtinfo;
> + const struct v4l2_mbus_framefmt *format;
> + unsigned int num_data_lanes = input->bus.num_data_lanes;
> + unsigned int val = 0;
> +
> + format = v4l2_subdev_state_get_stream_format(state, input->pad, 0);
> + fmtinfo = mtk_seninf_format_info(format->code);
> +
> + /* Configure timestamp */
> + writel(SENINF_TIMESTAMP_STEP, input->base + SENINF_TG1_TM_STP);
> +
> + /* HQ */
> + writel(0x0, input->base + SENINF_TG1_PH_CNT);
Zero means:
- Sensor master clock: ISP_CLK
- Sensor clock polarity: Rising edge
- Sensor reset deasserted
- Sensor powered up
- Pixel clock inversion disabled
- Sensor master clock polarity disabled
- Phase counter disabled
> + writel(0x10001, input->base + SENINF_TG1_SEN_CK);
Unroll this one... this is the TG1 sensor clock divider.
CLKFL GENMASK(5, 0)
CLKRS GENMASK(13, 8)
CLKCNT GENMASK(21,16)
Like this, I don't get what you're trying to set, because you're using a fixed
sensor clock rate, meaning that only a handful of camera sensors will be usable.
Is this 8Mhz? 16? 24? what? :-)
Two hints:
- sensor_clk = clk_get_rate(isp_clk) / (tg1_sen_ck_clkcnt + 1);
- int mtk_seninf_set_sensor_clk(u8 rate_mhz);
Please :-)
> +
> + /* First Enable Sensor interface and select pad (0x1a04_0200) */
> + mtk_seninf_input_update(input, SENINF_CTRL, SENINF_EN, 1);
> + mtk_seninf_input_update(input, SENINF_CTRL, PAD2CAM_DATA_SEL, SENINF_PAD_10BIT);
> + mtk_seninf_input_update(input, SENINF_CTRL, SENINF_SRC_SEL, 0);
> + mtk_seninf_input_update(input, SENINF_CTRL_EXT, SENINF_CSI2_IP_EN, 1);
> + mtk_seninf_input_update(input, SENINF_CTRL_EXT, SENINF_NCSI2_IP_EN, 0);
> +
> + /* DPCM Enable */
> + if (fmtinfo->flags & MTK_SENINF_FORMAT_DPCM)
> + val = SENINF_CSI2_DPCM_DI_2A_DPCM_EN;
> + else
> + val = SENINF_CSI2_DPCM_DI_30_DPCM_EN;
> + writel(val, input->base + SENINF_CSI2_DPCM);
> +
> + /* Settle delay */
> + mtk_seninf_input_update(input, SENINF_CSI2_LNRD_TIMING,
> + DATA_SETTLE_PARAMETER, SENINF_SETTLE_DELAY);
> +
> + /* HQ */
> + writel(0x10, input->base + SENINF_CSI2_LNRC_FSM);
As far as I know, SENINF_CSI2_LNRC_FSM is a read-only register: this write will do
exactly nothing...
> +
> + /* CSI2 control */
> + val = readl(input->base + SENINF_CSI2_CTL)
> + | (FIELD_PREP(SENINF_CSI2_CTL_ED_SEL, DATA_HEADER_ORDER_DI_WCL_WCH)
> + | SENINF_CSI2_CTL_CLOCK_LANE_EN | (BIT(num_data_lanes) - 1));
> + writel(val, input->base + SENINF_CSI2_CTL);
> +
> + mtk_seninf_input_update(input, SENINF_CSI2_RESYNC_MERGE_CTL,
> + BYPASS_LANE_RESYNC, 0);
93 columns: fits in one line (not only this one!).
> + mtk_seninf_input_update(input, SENINF_CSI2_RESYNC_MERGE_CTL, CDPHY_SEL, 0);
> + mtk_seninf_input_update(input, SENINF_CSI2_RESYNC_MERGE_CTL,
> + CPHY_LANE_RESYNC_CNT, 3);
> + mtk_seninf_input_update(input, SENINF_CSI2_MODE, CSR_CSI2_MODE, 0);
> + mtk_seninf_input_update(input, SENINF_CSI2_MODE, CSR_CSI2_HEADER_LEN, 0);
> + mtk_seninf_input_update(input, SENINF_CSI2_DPHY_SYNC, SYNC_SEQ_MASK_0, 0xff00);
> + mtk_seninf_input_update(input, SENINF_CSI2_DPHY_SYNC, SYNC_SEQ_PAT_0, 0x001d);
> +
> + mtk_seninf_input_update(input, SENINF_CSI2_CTL, CLOCK_HS_OPTION, 0);
> + mtk_seninf_input_update(input, SENINF_CSI2_CTL, HSRX_DET_EN, 0);
> + mtk_seninf_input_update(input, SENINF_CSI2_CTL, HS_TRAIL_EN, 1);
> + mtk_seninf_input_update(input, SENINF_CSI2_HS_TRAIL, HS_TRAIL_PARAMETER,
> + SENINF_HS_TRAIL_PARAMETER);
> +
> + /* Set debug port to output packet number */
> + mtk_seninf_input_update(input, SENINF_CSI2_DGB_SEL, DEBUG_EN, 1);
> + mtk_seninf_input_update(input, SENINF_CSI2_DGB_SEL, DEBUG_SEL, 0x1a);
> +
> + /* HQ */
> + writel(0xfffffffe, input->base + SENINF_CSI2_SPARE0);
I have no idea what this SPARE0 does, but I think that this is something that you
want to get from platform_data, as I guess this would be different on various SoCs?
> +
> + /* Enable CSI2 IRQ mask */
> + /* Turn on all interrupt */
> + writel(0xffffffff, input->base + SENINF_CSI2_INT_EN);
> + /* Write clear CSI2 IRQ */
> + writel(0xffffffff, input->base + SENINF_CSI2_INT_STATUS);
> + /* Enable CSI2 Extend IRQ mask */
You missed:
writel(0xffffffff, input->base + SENINF_CSI2_INT_EN_EXT);
P.S.: #define SENINF_CSI2_INT_EN_EXT 0x0b10
> + /* Turn on all interrupt */
/* Reset the CSI2 to commit changes */ <-- makes more sense, doesn't it?
> + mtk_seninf_input_update(input, SENINF_CTRL, CSI2_SW_RST, 1);
> + udelay(1);
> + mtk_seninf_input_update(input, SENINF_CTRL, CSI2_SW_RST, 0);
> +}
> +
> +static void mtk_seninf_mux_setup(struct mtk_seninf_mux *mux,
> + struct mtk_seninf_input *input,
> + struct v4l2_subdev_state *state)
> +{
> + const struct mtk_seninf_format_info *fmtinfo;
> + const struct v4l2_mbus_framefmt *format;
> + unsigned int pix_sel_ext;
> + unsigned int pix_sel;
> + unsigned int hs_pol = 0;
> + unsigned int vs_pol = 0;
> + unsigned int val;
> + u32 rst_mask;
> +
> + format = v4l2_subdev_state_get_stream_format(state, input->pad, 0);
> + fmtinfo = mtk_seninf_format_info(format->code);
> +
> + /* Enable mux */
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_MUX_EN, 1);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_SRC_SEL, SENINF_MIPI_SENSOR);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT, SENINF_SRC_SEL_EXT, SENINF_NORMAL_MODEL);
> +
> + pix_sel_ext = 0;
> + pix_sel = 1;
pixels_per_cycle = 1;
bus_width = pixels_per_cycle >> 1;
because: 0 == 1pix/cyc, 1 == 2pix/cyc, 2 == 4pix/cyc, 3 == 8pix... etc
...but the width of this register depends on the SoC, so you also want to set
constraints to the bus width on a per-soc basis (platform data again, or at
least leave a comment here).
mtk_seninf_mux_update(.... PIX_SEL_EXT, bus_width);
mtk_seninf_mux_update(.... PIX_SEL, bus_width);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT, SENINF_PIX_SEL_EXT, pix_sel_ext);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_PIX_SEL, pix_sel);
> +
> + if (fmtinfo->flags & MTK_SENINF_FORMAT_JPEG) {
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FULL_WR_EN, 0);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FLUSH_EN,
> + FIFO_FLUSH_EN_JPEG_2_PIXEL_MODE);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_PUSH_EN,
> + FIFO_PUSH_EN_JPEG_2_PIXEL_MODE);
> + } else {
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FULL_WR_EN, 2);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FLUSH_EN,
> + FIFO_FLUSH_EN_NORMAL_MODE);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_PUSH_EN,
> + FIFO_PUSH_EN_NORMAL_MODE);
> + }
> +
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_HSYNC_POL, hs_pol);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_VSYNC_POL, vs_pol);
> +
> + val = mtk_seninf_mux_read(mux, SENINF_MUX_CTRL);
> + rst_mask = SENINF_MUX_CTRL_SENINF_IRQ_SW_RST | SENINF_MUX_CTRL_SENINF_MUX_SW_RST;
> +
> + mtk_seninf_mux_write(mux, SENINF_MUX_CTRL, val | rst_mask);
Are you sure that you don't need any wait between assertion and deassertion of RST?
Looks strange, but I don't really know then.
> + mtk_seninf_mux_write(mux, SENINF_MUX_CTRL, val & ~rst_mask);
> +
> + /* HQ */
> + mtk_seninf_mux_write(mux, SENINF_MUX_SPARE, 0xc2000);
val = SENINF_FIFO_FULL_SEL;
/* SPARE field meaning is unknown */
val |= 0xc0000;
mtk_seninf_mux_write(mux, SENINF_MUX_SPARE, val);
> +}
> +
> +static void mtk_seninf_top_mux_setup(struct mtk_seninf *priv,
> + enum mtk_seninf_id seninf_id,
> + struct mtk_seninf_mux *mux)
> +{
> + unsigned int val;
> +
> + /*
> + * Use the top mux (from SENINF input to MUX) to configure routing, and
> + * hardcode a 1:1 mapping from the MUX instances to the SENINF outputs.
> + */
> + val = readl(priv->base + SENINF_TOP_MUX_CTRL)
> + & ~(0xf << (mux->mux_id * 4));
> + val |= (seninf_id & 0xf) << (mux->mux_id * 4);
> + writel(val, priv->base + SENINF_TOP_MUX_CTRL);
> +
> + writel(0x76541010, priv->base + SENINF_TOP_CAM_MUX_CTRL);
Each four bits of TOP_CAM_MUX_CTRL selects between seninf1 to seninf8 muxes, and
TOP_MUX_CTRL is laid out in the very same way.
This means that if you're calculating a value for TOP_MUX_CTRL, you can do exactly
the same for TOP_CAM_MUX_CTRL.
> +}
> +
> +static void seninf_enable_test_pattern(struct mtk_seninf *priv,
> + struct v4l2_subdev_state *state)
> +{
> + struct mtk_seninf_input *input = &priv->inputs[CSI_PORT_0];
> + struct mtk_seninf_mux *mux = &priv->muxes[0];
> + const struct mtk_seninf_format_info *fmtinfo;
> + const struct v4l2_mbus_framefmt *format;
> + unsigned int val;
> + unsigned int pix_sel_ext;
> + unsigned int pix_sel;
> + unsigned int hs_pol = 0;
> + unsigned int vs_pol = 0;
> + unsigned int seninf = 0;
> + unsigned int tm_size = 0;
> + unsigned int mux_id = mux->mux_id;
> +
> + format = v4l2_subdev_state_get_stream_format(state, priv->conf->nb_inputs, 0);
> + fmtinfo = mtk_seninf_format_info(format->code);
> +
> + mtk_seninf_update(priv, SENINF_TOP_CTRL, MUX_LP_MODE, 0);
> +
> + mtk_seninf_update(priv, SENINF_TOP_CTRL, SENINF_PCLK_EN, 1);
> + mtk_seninf_update(priv, SENINF_TOP_CTRL, SENINF2_PCLK_EN, 1);
> +
> + mtk_seninf_input_update(input, SENINF_CTRL, SENINF_EN, 1);
> + mtk_seninf_input_update(input, SENINF_CTRL, SENINF_SRC_SEL, 1);
> + mtk_seninf_input_update(input, SENINF_CTRL_EXT,
> + SENINF_TESTMDL_IP_EN, 1);
> +
> + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_EN, 1);
> + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_PAT, 0xc);
> + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_VSYNC, 4);
> + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_DUMMYPXL, 0x28);
> +
> + if (fmtinfo->flags & MTK_SENINF_FORMAT_BAYER)
> + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_FMT, 0x0);
> + else
> + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_FMT, 0x1);
> +
> + tm_size = FIELD_PREP(SENINF_TG1_TM_SIZE_TM_LINE, format->height + 8);
> + switch (format->code) {
> + case MEDIA_BUS_FMT_UYVY8_1X16:
> + case MEDIA_BUS_FMT_VYUY8_1X16:
> + case MEDIA_BUS_FMT_YUYV8_1X16:
> + case MEDIA_BUS_FMT_YVYU8_1X16:
> + tm_size |= FIELD_PREP(SENINF_TG1_TM_SIZE_TM_PXL, format->width * 2);
> + break;
> + default:
> + tm_size |= FIELD_PREP(SENINF_TG1_TM_SIZE_TM_PXL, format->width);
> + break;
> + }
> + writel(tm_size, input->base + SENINF_TG1_TM_SIZE);
> +
> + writel(TEST_MODEL_CLK_DIVIDED_CNT, input->base + SENINF_TG1_TM_CLK);
> + writel(TIME_STAMP_DIVIDER, input->base + SENINF_TG1_TM_STP);
> +
> + /* Set top mux */
> + val = (readl(priv->base + SENINF_TOP_MUX_CTRL) & (~(0xf << (mux_id * 4)))) |
> + ((seninf & 0xf) << (mux_id * 4));
> + writel(val, priv->base + SENINF_TOP_MUX_CTRL);
This is duplicated, and it is the same that you have in mtk_seninf_top_mux_setup()
> +
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_MUX_EN, 1);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT,
> + SENINF_SRC_SEL_EXT, SENINF_TEST_MODEL);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_SRC_SEL, 1);
> +
> + pix_sel_ext = 0;
> + pix_sel = 1;
> +
This is in mtk_seninf_mux_setup(), but if you apply my suggestion, it won't be in
there anymore, so you'll call a function here to set the right value :-)
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT,
> + SENINF_PIX_SEL_EXT, pix_sel_ext);
> +
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_PIX_SEL, pix_sel);
> +
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_PUSH_EN, 0x1f);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FLUSH_EN, 0x1b);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FULL_WR_EN, 2);
> +
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_HSYNC_POL, hs_pol);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_VSYNC_POL, vs_pol);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_HSYNC_MASK, 1);
> +
> + mtk_seninf_mux_write(mux, SENINF_MUX_INTEN,
> + SENINF_IRQ_CLR_SEL | SENINF_ALL_ERR_IRQ_EN);
> +
> + mtk_seninf_mux_write(mux, SENINF_MUX_CTRL,
> + mtk_seninf_mux_read(mux, SENINF_MUX_CTRL) |
> + SENINF_MUX_CTRL_SENINF_IRQ_SW_RST |
> + SENINF_MUX_CTRL_SENINF_MUX_SW_RST);
> + udelay(1);
> + mtk_seninf_mux_write(mux, SENINF_MUX_CTRL,
> + mtk_seninf_mux_read(mux, SENINF_MUX_CTRL) &
> + ~(SENINF_MUX_CTRL_SENINF_IRQ_SW_RST |
> + SENINF_MUX_CTRL_SENINF_MUX_SW_RST));
> +
> + //check this
> + writel(0x76540010, priv->base + SENINF_TOP_CAM_MUX_CTRL);
> +
> + dev_dbg(priv->dev, "%s: OK\n", __func__);
> +}
> +
Cheers,
Angelo
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv
2024-01-10 14:14 ` [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv Julien Stephan
@ 2024-01-11 12:07 ` AngeloGioacchino Del Regno
2024-01-12 0:58 ` CK Hu (胡俊光)
` (8 subsequent siblings)
9 siblings, 0 replies; 28+ messages in thread
From: AngeloGioacchino Del Regno @ 2024-01-11 12:07 UTC (permalink / raw)
To: Julien Stephan
Cc: Phi-bang Nguyen, Florian Sylvestre, Paul Elder, Laurent Pinchart,
Andy Hsieh, Conor Dooley, devicetree, Krzysztof Kozlowski,
linux-arm-kernel, linux-kernel, linux-mediatek, linux-media,
Louis Kuo, Matthias Brugger, Mauro Carvalho Chehab, Rob Herring
Il 10/01/24 15:14, Julien Stephan ha scritto:
> From: Phi-bang Nguyen <pnguyen@baylibre.com>
>
> This driver provides a path to bypass the SoC ISP so that image data
> coming from the SENINF can go directly into memory without any image
> processing. This allows the use of an external ISP.
>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
> [Paul Elder fix irq locking]
> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
> Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
> MAINTAINERS | 1 +
> .../platform/mediatek/isp/isp_30/Kconfig | 19 +
> .../platform/mediatek/isp/isp_30/Makefile | 1 +
> .../mediatek/isp/isp_30/camsv/Makefile | 7 +
> .../mediatek/isp/isp_30/camsv/mtk_camsv.c | 328 ++++++++
> .../mediatek/isp/isp_30/camsv/mtk_camsv.h | 199 +++++
> .../isp/isp_30/camsv/mtk_camsv30_hw.c | 427 ++++++++++
> .../isp/isp_30/camsv/mtk_camsv30_regs.h | 60 ++
> .../isp/isp_30/camsv/mtk_camsv_video.c | 774 ++++++++++++++++++
> 9 files changed, 1816 insertions(+)
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/Makefile
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.c
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.h
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_hw.c
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_regs.h
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv_video.c
>
..snip..
> diff --git a/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_hw.c b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_hw.c
> new file mode 100644
> index 000000000000..3b8ccdab2af0
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_hw.c
> @@ -0,0 +1,427 @@
..snip..
> +
> +static int mtk_camsv30_probe(struct platform_device *pdev)
> +{
> + static const char * const clk_names[] = { "cam", "camtg", "camsv"};
> +
> + struct mtk_cam_dev *cam_dev;
> + struct device *dev = &pdev->dev;
> + int ret;
> + int i;
> +
> + if (!iommu_present(&platform_bus_type))
> + return -EPROBE_DEFER;
> +
> + cam_dev = devm_kzalloc(dev, sizeof(*cam_dev), GFP_KERNEL);
> + if (!cam_dev)
> + return -ENOMEM;
> +
> + cam_dev->conf = of_device_get_match_data(dev);
> + if (!cam_dev->conf)
> + return -ENODEV;
> +
> + cam_dev->dev = dev;
> + dev_set_drvdata(dev, cam_dev);
> +
> + cam_dev->regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(cam_dev->regs))
> + return dev_err_probe(dev, PTR_ERR(cam_dev->regs),
> + "failed to map register base\n");
> +
> +
> + cam_dev->regs_img0 = devm_platform_ioremap_resource(pdev, 1);
> +
> + if (IS_ERR(cam_dev->regs_img0))
> + return dev_err_probe(dev, PTR_ERR(cam_dev->regs_img0),
> + "failed to map img0 register base\n");
> +
> +
> + cam_dev->regs_tg = devm_platform_ioremap_resource(pdev, 2);
> + if (IS_ERR(cam_dev->regs_tg))
> + return dev_err_probe(dev, PTR_ERR(cam_dev->regs_tg),
> + "failed to map TG register base\n");
> +
> +
> + cam_dev->num_clks = ARRAY_SIZE(clk_names);
> + cam_dev->clks = devm_kcalloc(dev, cam_dev->num_clks,
> + sizeof(*cam_dev->clks), GFP_KERNEL);
> + if (!cam_dev->clks)
> + return -ENOMEM;
> +
> + for (i = 0; i < cam_dev->num_clks; ++i)
> + cam_dev->clks[i].id = clk_names[i];
> +
> + ret = devm_clk_bulk_get(dev, cam_dev->num_clks, cam_dev->clks);
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to get clocks: %i\n", ret);
> +
> +
> + cam_dev->irq = platform_get_irq(pdev, 0);
> + ret = devm_request_irq(dev, cam_dev->irq,
> + isp_irq_camsv30, 0,
> + dev_name(dev), cam_dev);
> + if (ret != 0)
> + return dev_err_probe(dev, -ENODEV, "failed to request irq=%d\n",
> + cam_dev->irq);
> +
> + cam_dev->hw_functions = &mtk_camsv30_hw_functions;
> +
> + spin_lock_init(&cam_dev->irqlock);
> +
> + /* initialise runtime power management */
> + pm_runtime_set_autosuspend_delay(dev, MTK_CAMSV30_AUTOSUSPEND_DELAY_MS);
> + pm_runtime_use_autosuspend(dev);
> + pm_runtime_set_suspended(dev);
> + pm_runtime_enable(dev);
devm_pm_runtime_enable() ?
> +
> + /* Initialize the v4l2 common part */
> + return mtk_cam_dev_init(cam_dev);
> +}
> +
> +static int mtk_camsv30_remove(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct mtk_cam_dev *cam_dev = dev_get_drvdata(dev);
> +
> + mtk_cam_dev_cleanup(cam_dev);
> + pm_runtime_put_autosuspend(dev);
> + pm_runtime_disable(dev);
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops mtk_camsv30_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> + pm_runtime_force_resume)
> + SET_RUNTIME_PM_OPS(mtk_camsv30_runtime_suspend,
> + mtk_camsv30_runtime_resume, NULL)
> +};
> +
> +static const struct of_device_id mtk_camsv30_of_ids[] = {
> + { .compatible = "mediatek,mt8365-camsv", .data = &camsv30_conf },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, mtk_camsv30_of_ids);
> +
> +static struct platform_driver mtk_camsv30_driver = {
> + .probe = mtk_camsv30_probe,
> + .remove = mtk_camsv30_remove,
You definitely want to use void .remove_new() here
Cheers,
Angelo
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv
2024-01-10 14:14 ` [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv Julien Stephan
2024-01-11 12:07 ` AngeloGioacchino Del Regno
@ 2024-01-12 0:58 ` CK Hu (胡俊光)
2024-01-12 1:48 ` CK Hu (胡俊光)
` (7 subsequent siblings)
9 siblings, 0 replies; 28+ messages in thread
From: CK Hu (胡俊光) @ 2024-01-12 0:58 UTC (permalink / raw)
To: jstephan
Cc: linux-kernel, linux-mediatek, robh+dt, linux-media, devicetree,
paul.elder, mchehab, conor+dt,
Andy Hsieh (謝智皓),
linux-arm-kernel, krzysztof.kozlowski+dt,
Louis Kuo (郭德寧),
laurent.pinchart, fsylvestre, matthias.bgg,
angelogioacchino.delregno, pnguyen
Hi, Julien:
On Wed, 2024-01-10 at 15:14 +0100, Julien Stephan wrote:
>
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> From: Phi-bang Nguyen <pnguyen@baylibre.com>
>
> This driver provides a path to bypass the SoC ISP so that image data
> coming from the SENINF can go directly into memory without any image
> processing. This allows the use of an external ISP.
>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
> [Paul Elder fix irq locking]
> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
> Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
[snip]
> +
> +static int mtk_cam_vb2_start_streaming(struct vb2_queue *vq,
> + unsigned int count)
> +{
> + struct mtk_cam_dev *cam = vb2_get_drv_priv(vq);
> + struct mtk_cam_dev_buffer *buf;
> + struct mtk_cam_video_device *vdev =
> + vb2_queue_to_mtk_cam_video_device(vq);
> + struct device *dev = cam->dev;
> + const struct v4l2_pix_format_mplane *fmt = &vdev->format;
> + int ret;
> + unsigned long flags = 0;
> +
> + if (pm_runtime_get_sync(dev) < 0) {
> + dev_err(dev, "failed to get pm_runtime\n");
> + pm_runtime_put_autosuspend(dev);
> + return -1;
> + }
> +
> + (*cam->hw_functions->mtk_cam_setup)(cam, fmt->width, fmt-
> >height,
> + fmt->plane_fmt[0].bytesperline, vdev->fmtinfo-
> >code);
> +
> +
> + /* Enable CMOS and VF */
> + mtk_cam_cmos_vf_enable(cam, true, vdev->fmtinfo->packed);
> +
> + mutex_lock(&cam->op_lock);
> +
> + ret = mtk_cam_verify_format(cam);
> + if (ret < 0)
> + goto fail_unlock;
> +
> + /* Start streaming of the whole pipeline now*/
> + if (!cam->pipeline.start_count) {
> + ret = media_pipeline_start(vdev->vdev.entity.pads,
> + &cam->pipeline);
> + if (ret) {
> + dev_err(dev, "failed to start pipeline:%d\n",
> ret);
> + goto fail_unlock;
> + }
> + }
> +
> + /* Media links are fixed after media_pipeline_start */
> + cam->stream_count++;
> +
> + cam->sequence = (unsigned int)-1;
> +
> + /* Stream on the sub-device */
> + ret = v4l2_subdev_call(&cam->subdev, video, s_stream, 1);
> + if (ret)
> + goto fail_no_stream;
> +
> + mutex_unlock(&cam->op_lock);
> +
> + /* Create dummy buffer */
> + cam->dummy_size = fmt->plane_fmt[0].sizeimage;
> +
> + cam->dummy.vaddr = dma_alloc_coherent(cam->dev, cam-
> >dummy_size,
> + &cam->dummy.daddr,
> GFP_KERNEL);
Dummy buffer cost much in DRAM footprint. I think we can get rid of
this dummy buffer. If no buffer is queued from user space, call
mtk_camsv30_cmos_vf_hw_disable() to stop write data into DRAM. After
buffer is queued from user space, call mtk_camsv30_cmos_vf_hw_enable()
to start write data into DRAM.
Regards,
CK
> + if (!cam->dummy.vaddr) {
> + ret = -ENOMEM;
> + goto fail_no_buffer;
> + }
> +
> + /* update first buffer address */
> +
> + /* added the buffer into the tracking list */
> + spin_lock_irqsave(&cam->irqlock, flags);
> + if (list_empty(&cam->buf_list)) {
> + (*cam->hw_functions->mtk_cam_update_buffers_add)(cam,
> &cam->dummy);
> + cam->is_dummy_used = true;
> + } else {
> + buf = list_first_entry_or_null(&cam->buf_list,
> + struct
> mtk_cam_dev_buffer,
> + list);
> + (*cam->hw_functions->mtk_cam_update_buffers_add)(cam,
> buf);
> + cam->is_dummy_used = false;
> + }
> + spin_unlock_irqrestore(&cam->irqlock, flags);
> +
> + return 0;
> +
> +fail_no_buffer:
> + mutex_lock(&cam->op_lock);
> + v4l2_subdev_call(&cam->subdev, video, s_stream, 0);
> +fail_no_stream:
> + cam->stream_count--;
> + if (cam->stream_count == 0)
> + media_pipeline_stop(vdev->vdev.entity.pads);
> +fail_unlock:
> + mutex_unlock(&cam->op_lock);
> + mtk_cam_vb2_return_all_buffers(cam, VB2_BUF_STATE_QUEUED);
> +
> + return ret;
> +}
> +
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv
2024-01-10 14:14 ` [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv Julien Stephan
2024-01-11 12:07 ` AngeloGioacchino Del Regno
2024-01-12 0:58 ` CK Hu (胡俊光)
@ 2024-01-12 1:48 ` CK Hu (胡俊光)
2024-01-12 3:55 ` CK Hu (胡俊光)
` (6 subsequent siblings)
9 siblings, 0 replies; 28+ messages in thread
From: CK Hu (胡俊光) @ 2024-01-12 1:48 UTC (permalink / raw)
To: jstephan
Cc: linux-kernel, linux-mediatek, robh+dt, linux-media, devicetree,
paul.elder, mchehab, conor+dt,
Andy Hsieh (謝智皓),
linux-arm-kernel, krzysztof.kozlowski+dt,
Louis Kuo (郭德寧),
laurent.pinchart, fsylvestre, matthias.bgg,
angelogioacchino.delregno, pnguyen
Hi, Julien:
On Wed, 2024-01-10 at 15:14 +0100, Julien Stephan wrote:
>
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> From: Phi-bang Nguyen <pnguyen@baylibre.com>
>
> This driver provides a path to bypass the SoC ISP so that image data
> coming from the SENINF can go directly into memory without any image
> processing. This allows the use of an external ISP.
>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
> [Paul Elder fix irq locking]
> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
> Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
[snip]
> +
> +static void mtk_cam_cmos_vf_enable(struct mtk_cam_dev *cam_dev,
> + bool enable, bool pak_en)
> +{
> + struct device *dev = cam_dev->dev;
> + unsigned long flags = 0;
> +
> + if (pm_runtime_get_sync(dev) < 0) {
> + dev_err(dev, "failed to get pm_runtime\n");
> + goto out;
> + }
> +
> + spin_lock_irqsave(&cam_dev->irqlock, flags);
The comment of cam_dev->irqlock is "Protects the buffer list". Why do
you protect hw_enable/hw_disable? And I think the naming of irqlock
should be changed to 'buf_list_lock'.
Regards,
CK
> + if (enable)
> + (*cam_dev->hw_functions-
> >mtk_cam_cmos_vf_hw_enable)(cam_dev, pak_en);
> + else
> + (*cam_dev->hw_functions-
> >mtk_cam_cmos_vf_hw_disable)(cam_dev, pak_en);
> + spin_unlock_irqrestore(&cam_dev->irqlock, flags);
> +
> +out:
> + pm_runtime_put_autosuspend(dev);
> +}
> +
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv
2024-01-10 14:14 ` [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv Julien Stephan
` (2 preceding siblings ...)
2024-01-12 1:48 ` CK Hu (胡俊光)
@ 2024-01-12 3:55 ` CK Hu (胡俊光)
2024-02-15 11:55 ` Sakari Ailus
` (5 subsequent siblings)
9 siblings, 0 replies; 28+ messages in thread
From: CK Hu (胡俊光) @ 2024-01-12 3:55 UTC (permalink / raw)
To: jstephan
Cc: linux-kernel, linux-mediatek, robh+dt, linux-media, devicetree,
paul.elder, mchehab, conor+dt,
Andy Hsieh (謝智皓),
linux-arm-kernel, krzysztof.kozlowski+dt,
Louis Kuo (郭德寧),
laurent.pinchart, fsylvestre, matthias.bgg,
angelogioacchino.delregno, pnguyen
Hi, Julien:
On Wed, 2024-01-10 at 15:14 +0100, Julien Stephan wrote:
>
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> From: Phi-bang Nguyen <pnguyen@baylibre.com>
>
> This driver provides a path to bypass the SoC ISP so that image data
> coming from the SENINF can go directly into memory without any image
> processing. This allows the use of an external ISP.
>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
> [Paul Elder fix irq locking]
> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
> Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
[snip]
> +
> +static int mtk_cam_vb2_buf_init(struct vb2_buffer *vb)
> +{
> + struct mtk_cam_dev_buffer *buf = to_mtk_cam_dev_buffer(vb);
> +
> + buf->daddr = 0ULL;
From [1], vb is allocated by kzalloc(), buf is zero initialized, so
this is redundant.
[1]
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/media/common/videobuf2/videobuf2-core.c?h=next-20240111#n466
Regards,
CK
> +
> + return 0;
> +}
> +
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 1/5] dt-bindings: media: add mediatek ISP3.0 sensor interface
2024-01-10 14:14 ` [PATCH v4 1/5] dt-bindings: media: add mediatek ISP3.0 sensor interface Julien Stephan
2024-01-11 8:15 ` Laurent Pinchart
@ 2024-01-12 7:32 ` Krzysztof Kozlowski
1 sibling, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2024-01-12 7:32 UTC (permalink / raw)
To: Julien Stephan
Cc: Louis Kuo, Phi-Bang Nguyen, Laurent Pinchart, Andy Hsieh,
AngeloGioacchino Del Regno, Conor Dooley, devicetree,
Florian Sylvestre, Krzysztof Kozlowski, linux-arm-kernel,
linux-kernel, linux-mediatek, linux-media, Matthias Brugger,
Mauro Carvalho Chehab, Paul Elder, Rob Herring
On 10/01/2024 15:14, Julien Stephan wrote:
> From: Louis Kuo <louis.kuo@mediatek.com>
>
> This adds the bindings, for the mediatek ISP3.0 SENINF module embedded in
> some Mediatek SoC, such as the mt8365
>
...
> + clock-names:
> + items:
> + - const: camsys
> + - const: top_mux
> +
> + phys:
> + minItems: 1
> + maxItems: 4
> + description:
> + phandle to the PHYs connected to CSI0/A, CSI1, CSI2 and CSI0B
> +
> + phy-names:
> + minItems: 1
> + items:
> + - const: csi0
> + - const: csi1
> + - const: csi2
> + - const: csi0b
Why one hardware has flexible number of phys?
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: CSI0 or CSI0A port
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: CSI1 port
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + port@2:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: CSI2 port
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + port@3:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: CSI0B port
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> + data-lanes:
> + minItems: 1
> + maxItems: 2
> +
> + port@4:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: connection point for cam0
> +
> + port@5:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: connection point for cam1
> +
> + port@6:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: connection point for camsv0
> +
> + port@7:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: connection point for camsv1
> +
> + port@8:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: connection point for camsv2
> +
> + port@9:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: connection point for camsv3
> +
> + required:
> + - port@0
> + - port@1
> + - port@2
> + - port@3
> + - port@4
> + - port@5
> + - port@6
> + - port@7
> + - port@8
> + - port@9
> +
> +required:
> + - compatible
> + - interrupts
> + - clocks
> + - clock-names
> + - power-domains
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mediatek,mt8365-clk.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/phy/phy.h>
> + #include <dt-bindings/power/mediatek,mt8365-power.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
Use 4 spaces for example indentation.
> +
> + seninf: seninf@15040000 {
Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + compatible = "mediatek,mt8365-seninf";
> + reg = <0 0x15040000 0 0x6000>;
> + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&camsys CLK_CAM_SENIF>,
> + <&topckgen CLK_TOP_SENIF_SEL>;
> + clock-names = "camsys", "top_mux";
> +
> + power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
> +
> + phys = <&mipi_csi0 PHY_TYPE_DPHY>;
> + phy-names = "csi0";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + seninf_in1: endpoint {
> + clock-lanes = <2>;
> + data-lanes = <1 3 0 4>;
> + remote-endpoint = <&isp1_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + };
> +
> + port@2 {
> + reg = <2>;
> + };
> +
> + port@3 {
> + reg = <3>;
> + };
> +
> + port@4 {
> + reg = <4>;
> + seninf_camsv1_endpoint: endpoint {
> + remote-endpoint = <&camsv1_endpoint>;
> + };
> + };
> +
> + port@5 {
> + reg = <5>;
> + };
> +
> + port@6 {
> + reg = <6>;
> + };
> +
> + port@7 {
> + reg = <7>;
> + };
> +
> + port@8 {
> + reg = <8>;
> + };
> +
> + port@9 {
> + reg = <9>;
> + };
> +
Stray blank line
> + };
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 2/5] dt-bindings: media: add mediatek ISP3.0 camsv
2024-01-10 14:14 ` [PATCH v4 2/5] dt-bindings: media: add mediatek ISP3.0 camsv Julien Stephan
@ 2024-01-12 7:34 ` Krzysztof Kozlowski
2024-01-12 7:41 ` Laurent Pinchart
0 siblings, 1 reply; 28+ messages in thread
From: Krzysztof Kozlowski @ 2024-01-12 7:34 UTC (permalink / raw)
To: Julien Stephan
Cc: Phi-bang Nguyen, Andy Hsieh, AngeloGioacchino Del Regno,
Conor Dooley, devicetree, Florian Sylvestre, Krzysztof Kozlowski,
Laurent Pinchart, linux-arm-kernel, linux-kernel, linux-mediatek,
linux-media, Louis Kuo, Matthias Brugger, Mauro Carvalho Chehab,
Paul Elder, Rob Herring
On 10/01/2024 15:14, Julien Stephan wrote:
> From: Phi-bang Nguyen <pnguyen@baylibre.com>
>
> This adds the bindings, for the ISP3.0 camsv module embedded in
> some Mediatek SoC, such as the mt8365
>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> Link: https://lore.kernel.org/r/20230807094940.329165-4-jstephan@baylibre.com
> ---
> .../bindings/media/mediatek,mt8365-camsv.yaml | 109 ++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 110 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
> new file mode 100644
> index 000000000000..097b1ab6bc72
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
> @@ -0,0 +1,109 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2023 MediaTek, BayLibre
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/mediatek,mt8365-camsv.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek CAMSV 3.0
> +
> +maintainers:
> + - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> + - Julien Stephan <jstephan@baylibre.com>
> + - Andy Hsieh <andy.hsieh@mediatek.com>
> +
> +description:
> + The CAMSV is a set of DMA engines connected to the SENINF CSI-2
> + receivers. The number of CAMSVs depend on the SoC model.
DMA should not go to media, but to dma
> +
> +properties:
> + compatible:
> + const: mediatek,mt8365-camsv
> +
> + reg:
> + items:
> + - description: camsv base
> + - description: img0 base
> + - description: tg base
> +
> + interrupts:
> + maxItems: 1
> +
> + power-domains:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: cam clock
> + - description: camtg clock
> + - description: camsv clock
> +
> + clock-names:
> + items:
> + - const: cam
> + - const: camtg
> + - const: camsv
> +
> + iommus:
> + maxItems: 1
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: connection point for camsv0
This explains me nothing. What type of connection point? How does it fit
the pipeline going to the display?
It seems you represented DMA as some other device to make your drivers
easier... That's not how it works.
> +
> + required:
> + - port@0
> +
> +required:
> + - compatible
> + - interrupts
> + - clocks
> + - clock-names
> + - power-domains
> + - iommus
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/clock/mediatek,mt8365-clk.h>
> + #include <dt-bindings/memory/mediatek,mt8365-larb-port.h>
> + #include <dt-bindings/power/mediatek,mt8365-power.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + camsv1: camsv@15050000 {
Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 2/5] dt-bindings: media: add mediatek ISP3.0 camsv
2024-01-12 7:34 ` Krzysztof Kozlowski
@ 2024-01-12 7:41 ` Laurent Pinchart
2024-01-12 7:49 ` Krzysztof Kozlowski
0 siblings, 1 reply; 28+ messages in thread
From: Laurent Pinchart @ 2024-01-12 7:41 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Julien Stephan, Phi-bang Nguyen, Andy Hsieh,
AngeloGioacchino Del Regno, Conor Dooley, devicetree,
Florian Sylvestre, Krzysztof Kozlowski, linux-arm-kernel,
linux-kernel, linux-mediatek, linux-media, Louis Kuo,
Matthias Brugger, Mauro Carvalho Chehab, Paul Elder, Rob Herring
On Fri, Jan 12, 2024 at 08:34:45AM +0100, Krzysztof Kozlowski wrote:
> On 10/01/2024 15:14, Julien Stephan wrote:
> > From: Phi-bang Nguyen <pnguyen@baylibre.com>
> >
> > This adds the bindings, for the ISP3.0 camsv module embedded in
> > some Mediatek SoC, such as the mt8365
> >
> > Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> > Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> > Link: https://lore.kernel.org/r/20230807094940.329165-4-jstephan@baylibre.com
> > ---
> > .../bindings/media/mediatek,mt8365-camsv.yaml | 109 ++++++++++++++++++
> > MAINTAINERS | 1 +
> > 2 files changed, 110 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
> > new file mode 100644
> > index 000000000000..097b1ab6bc72
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
> > @@ -0,0 +1,109 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +# Copyright (c) 2023 MediaTek, BayLibre
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/mediatek,mt8365-camsv.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MediaTek CAMSV 3.0
> > +
> > +maintainers:
> > + - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > + - Julien Stephan <jstephan@baylibre.com>
> > + - Andy Hsieh <andy.hsieh@mediatek.com>
> > +
> > +description:
> > + The CAMSV is a set of DMA engines connected to the SENINF CSI-2
> > + receivers. The number of CAMSVs depend on the SoC model.
>
> DMA should not go to media, but to dma
They're not generic DMA engines. The CAMSV is a video capture device
that includes a DMA engine, much like pretty much all the other video
capture devices.
> > +
> > +properties:
> > + compatible:
> > + const: mediatek,mt8365-camsv
> > +
> > + reg:
> > + items:
> > + - description: camsv base
> > + - description: img0 base
> > + - description: tg base
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > + clocks:
> > + items:
> > + - description: cam clock
> > + - description: camtg clock
> > + - description: camsv clock
> > +
> > + clock-names:
> > + items:
> > + - const: cam
> > + - const: camtg
> > + - const: camsv
> > +
> > + iommus:
> > + maxItems: 1
> > +
> > + ports:
> > + $ref: /schemas/graph.yaml#/properties/ports
> > +
> > + properties:
> > + port@0:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description: connection point for camsv0
>
> This explains me nothing. What type of connection point? How does it fit
> the pipeline going to the display?
The description seems wrong, it should state
description: Connection to the SENINF output
or something similar.
> It seems you represented DMA as some other device to make your drivers
> easier... That's not how it works.
>
> > +
> > + required:
> > + - port@0
> > +
> > +required:
> > + - compatible
> > + - interrupts
> > + - clocks
> > + - clock-names
> > + - power-domains
> > + - iommus
> > + - ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + #include <dt-bindings/interrupt-controller/irq.h>
> > + #include <dt-bindings/clock/mediatek,mt8365-clk.h>
> > + #include <dt-bindings/memory/mediatek,mt8365-larb-port.h>
> > + #include <dt-bindings/power/mediatek,mt8365-power.h>
> > +
> > + soc {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + camsv1: camsv@15050000 {
>
> Node names should be generic. See also an explanation and list of
> examples (not exhaustive) in DT specification:
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 2/5] dt-bindings: media: add mediatek ISP3.0 camsv
2024-01-12 7:41 ` Laurent Pinchart
@ 2024-01-12 7:49 ` Krzysztof Kozlowski
0 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2024-01-12 7:49 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Julien Stephan, Phi-bang Nguyen, Andy Hsieh,
AngeloGioacchino Del Regno, Conor Dooley, devicetree,
Florian Sylvestre, Krzysztof Kozlowski, linux-arm-kernel,
linux-kernel, linux-mediatek, linux-media, Louis Kuo,
Matthias Brugger, Mauro Carvalho Chehab, Paul Elder, Rob Herring
On 12/01/2024 08:41, Laurent Pinchart wrote:
> On Fri, Jan 12, 2024 at 08:34:45AM +0100, Krzysztof Kozlowski wrote:
>> On 10/01/2024 15:14, Julien Stephan wrote:
>>> From: Phi-bang Nguyen <pnguyen@baylibre.com>
>>>
>>> This adds the bindings, for the ISP3.0 camsv module embedded in
>>> some Mediatek SoC, such as the mt8365
>>>
>>> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
>>> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
>>> Link: https://lore.kernel.org/r/20230807094940.329165-4-jstephan@baylibre.com
>>> ---
>>> .../bindings/media/mediatek,mt8365-camsv.yaml | 109 ++++++++++++++++++
>>> MAINTAINERS | 1 +
>>> 2 files changed, 110 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
>>> new file mode 100644
>>> index 000000000000..097b1ab6bc72
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
>>> @@ -0,0 +1,109 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +# Copyright (c) 2023 MediaTek, BayLibre
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/media/mediatek,mt8365-camsv.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: MediaTek CAMSV 3.0
>>> +
>>> +maintainers:
>>> + - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>>> + - Julien Stephan <jstephan@baylibre.com>
>>> + - Andy Hsieh <andy.hsieh@mediatek.com>
>>> +
>>> +description:
>>> + The CAMSV is a set of DMA engines connected to the SENINF CSI-2
>>> + receivers. The number of CAMSVs depend on the SoC model.
>>
>> DMA should not go to media, but to dma
>
> They're not generic DMA engines. The CAMSV is a video capture device
> that includes a DMA engine, much like pretty much all the other video
> capture devices.
OK, some more explanation would be useful in description.
>
>>> +
>>> +properties:
>>> + compatible:
>>> + const: mediatek,mt8365-camsv
>>> +
>>> + reg:
>>> + items:
>>> + - description: camsv base
>>> + - description: img0 base
>>> + - description: tg base
>>> +
>>> + interrupts:
>>> + maxItems: 1
>>> +
>>> + power-domains:
>>> + maxItems: 1
>>> +
>>> + clocks:
>>> + items:
>>> + - description: cam clock
>>> + - description: camtg clock
>>> + - description: camsv clock
>>> +
>>> + clock-names:
>>> + items:
>>> + - const: cam
>>> + - const: camtg
>>> + - const: camsv
>>> +
>>> + iommus:
>>> + maxItems: 1
>>> +
>>> + ports:
>>> + $ref: /schemas/graph.yaml#/properties/ports
>>> +
>>> + properties:
>>> + port@0:
>>> + $ref: /schemas/graph.yaml#/properties/port
>>> + description: connection point for camsv0
>>
>> This explains me nothing. What type of connection point? How does it fit
>> the pipeline going to the display?
>
> The description seems wrong, it should state
>
> description: Connection to the SENINF output
>
> or something similar.
I am still not sure whether DMA engine should be connected via graphs.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 3/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 sensor interface
2024-01-11 12:04 ` AngeloGioacchino Del Regno
@ 2024-02-12 15:07 ` Julien Stephan
0 siblings, 0 replies; 28+ messages in thread
From: Julien Stephan @ 2024-02-12 15:07 UTC (permalink / raw)
To: AngeloGioacchino Del Regno
Cc: Louis Kuo, Phi-bang Nguyen, Florian Sylvestre, Laurent Pinchart,
Andy Hsieh, Conor Dooley, devicetree, Krzysztof Kozlowski,
linux-arm-kernel, linux-kernel, linux-mediatek, linux-media,
Matthias Brugger, Mauro Carvalho Chehab, Paul Elder, Rob Herring
Hi Angelo,
Thank you for your comments. Few questions below.
Cheers
Julien
Le jeu. 11 janv. 2024 à 13:04, AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com> a écrit :
.. snip ..
>
> > + .code = MEDIA_BUS_FMT_S5C_UYVY_JPEG_1X8,
> > + .flags = MTK_SENINF_FORMAT_JPEG,
> > + },
> > + /* Keep the input-only formats last. */
>
> Your comment doesn't make me understand why input-only formats shall be
> placed last - and makes me think that having two arrays (one for both
> and one for input only) would be easier and less error prone, other than
> making you able to drop the MTK_SENINF_FORMAT_INPUT_ONLY flag entirely.
>
Not sure I agree with you on this... If I want to split into two I
will have to duplicate
the whole mtk_seninf_formats[] which is quite big because the first 26
formats are
for both input and source pad. Moreover it will introduce some check on the pad
before choosing the correct format structure.. or maybe I am missing
your point?
> > + {
> > + .code = MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8,
> > + .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY,
> > + }, {
> > + .code = MEDIA_BUS_FMT_SRGGB10_DPCM8_1X8,
> > + .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY,
> > + }, {
> > + .code = MEDIA_BUS_FMT_SBGGR10_DPCM8_1X8,
> > + .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY,
> > + }, {
> > + .code = MEDIA_BUS_FMT_SGBRG10_DPCM8_1X8,
> > + .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY,
> > + }
> > +};
> > +
> > +static const struct mtk_seninf_format_info *mtk_seninf_format_info(u32 code)
> > +{
> > + unsigned int i;
> > +
> > + for (i = 0; i < ARRAY_SIZE(mtk_seninf_formats); ++i) {
> > + if (mtk_seninf_formats[i].code == code)
> > + return &mtk_seninf_formats[i];
> > + }
> > +
> > + return NULL;
> > +}
> > +
>
> ..snip..
>
> > +
> > +static void mtk_seninf_input_setup_csi2(struct mtk_seninf_input *input,
> > + struct v4l2_subdev_state *state)
> > +{
> > + const struct mtk_seninf_format_info *fmtinfo;
> > + const struct v4l2_mbus_framefmt *format;
> > + unsigned int num_data_lanes = input->bus.num_data_lanes;
> > + unsigned int val = 0;
> > +
> > + format = v4l2_subdev_state_get_stream_format(state, input->pad, 0);
> > + fmtinfo = mtk_seninf_format_info(format->code);
> > +
> > + /* Configure timestamp */
> > + writel(SENINF_TIMESTAMP_STEP, input->base + SENINF_TG1_TM_STP);
> > +
> > + /* HQ */
> > + writel(0x0, input->base + SENINF_TG1_PH_CNT);
>
> Zero means:
> - Sensor master clock: ISP_CLK
> - Sensor clock polarity: Rising edge
> - Sensor reset deasserted
> - Sensor powered up
> - Pixel clock inversion disabled
> - Sensor master clock polarity disabled
> - Phase counter disabled
>
> > + writel(0x10001, input->base + SENINF_TG1_SEN_CK);
>
> Unroll this one... this is the TG1 sensor clock divider.
>
> CLKFL GENMASK(5, 0)
> CLKRS GENMASK(13, 8)
> CLKCNT GENMASK(21,16)
>
> Like this, I don't get what you're trying to set, because you're using a fixed
> sensor clock rate, meaning that only a handful of camera sensors will be usable.
>
> Is this 8Mhz? 16? 24? what? :-)
>
> Two hints:
> - sensor_clk = clk_get_rate(isp_clk) / (tg1_sen_ck_clkcnt + 1);
> - int mtk_seninf_set_sensor_clk(u8 rate_mhz);
>
> Please :-)
>
> > +
> > + /* First Enable Sensor interface and select pad (0x1a04_0200) */
> > + mtk_seninf_input_update(input, SENINF_CTRL, SENINF_EN, 1);
> > + mtk_seninf_input_update(input, SENINF_CTRL, PAD2CAM_DATA_SEL, SENINF_PAD_10BIT);
> > + mtk_seninf_input_update(input, SENINF_CTRL, SENINF_SRC_SEL, 0);
> > + mtk_seninf_input_update(input, SENINF_CTRL_EXT, SENINF_CSI2_IP_EN, 1);
> > + mtk_seninf_input_update(input, SENINF_CTRL_EXT, SENINF_NCSI2_IP_EN, 0);
> > +
> > + /* DPCM Enable */
> > + if (fmtinfo->flags & MTK_SENINF_FORMAT_DPCM)
> > + val = SENINF_CSI2_DPCM_DI_2A_DPCM_EN;
> > + else
> > + val = SENINF_CSI2_DPCM_DI_30_DPCM_EN;
> > + writel(val, input->base + SENINF_CSI2_DPCM);
> > +
> > + /* Settle delay */
> > + mtk_seninf_input_update(input, SENINF_CSI2_LNRD_TIMING,
> > + DATA_SETTLE_PARAMETER, SENINF_SETTLE_DELAY);
> > +
> > + /* HQ */
> > + writel(0x10, input->base + SENINF_CSI2_LNRC_FSM);
>
> As far as I know, SENINF_CSI2_LNRC_FSM is a read-only register: this write will do
> exactly nothing...
>
> > +
> > + /* CSI2 control */
> > + val = readl(input->base + SENINF_CSI2_CTL)
> > + | (FIELD_PREP(SENINF_CSI2_CTL_ED_SEL, DATA_HEADER_ORDER_DI_WCL_WCH)
> > + | SENINF_CSI2_CTL_CLOCK_LANE_EN | (BIT(num_data_lanes) - 1));
> > + writel(val, input->base + SENINF_CSI2_CTL);
> > +
> > + mtk_seninf_input_update(input, SENINF_CSI2_RESYNC_MERGE_CTL,
> > + BYPASS_LANE_RESYNC, 0);
>
> 93 columns: fits in one line (not only this one!).
>
> > + mtk_seninf_input_update(input, SENINF_CSI2_RESYNC_MERGE_CTL, CDPHY_SEL, 0);
> > + mtk_seninf_input_update(input, SENINF_CSI2_RESYNC_MERGE_CTL,
> > + CPHY_LANE_RESYNC_CNT, 3);
> > + mtk_seninf_input_update(input, SENINF_CSI2_MODE, CSR_CSI2_MODE, 0);
> > + mtk_seninf_input_update(input, SENINF_CSI2_MODE, CSR_CSI2_HEADER_LEN, 0);
> > + mtk_seninf_input_update(input, SENINF_CSI2_DPHY_SYNC, SYNC_SEQ_MASK_0, 0xff00);
> > + mtk_seninf_input_update(input, SENINF_CSI2_DPHY_SYNC, SYNC_SEQ_PAT_0, 0x001d);
> > +
> > + mtk_seninf_input_update(input, SENINF_CSI2_CTL, CLOCK_HS_OPTION, 0);
> > + mtk_seninf_input_update(input, SENINF_CSI2_CTL, HSRX_DET_EN, 0);
> > + mtk_seninf_input_update(input, SENINF_CSI2_CTL, HS_TRAIL_EN, 1);
> > + mtk_seninf_input_update(input, SENINF_CSI2_HS_TRAIL, HS_TRAIL_PARAMETER,
> > + SENINF_HS_TRAIL_PARAMETER);
> > +
> > + /* Set debug port to output packet number */
> > + mtk_seninf_input_update(input, SENINF_CSI2_DGB_SEL, DEBUG_EN, 1);
> > + mtk_seninf_input_update(input, SENINF_CSI2_DGB_SEL, DEBUG_SEL, 0x1a);
> > +
> > + /* HQ */
> > + writel(0xfffffffe, input->base + SENINF_CSI2_SPARE0);
>
> I have no idea what this SPARE0 does, but I think that this is something that you
> want to get from platform_data, as I guess this would be different on various SoCs?
>
> > +
> > + /* Enable CSI2 IRQ mask */
> > + /* Turn on all interrupt */
> > + writel(0xffffffff, input->base + SENINF_CSI2_INT_EN);
> > + /* Write clear CSI2 IRQ */
> > + writel(0xffffffff, input->base + SENINF_CSI2_INT_STATUS);
> > + /* Enable CSI2 Extend IRQ mask */
>
> You missed:
> writel(0xffffffff, input->base + SENINF_CSI2_INT_EN_EXT);
>
> P.S.: #define SENINF_CSI2_INT_EN_EXT 0x0b10
>
>
> > + /* Turn on all interrupt */
>
> /* Reset the CSI2 to commit changes */ <-- makes more sense, doesn't it?
>
> > + mtk_seninf_input_update(input, SENINF_CTRL, CSI2_SW_RST, 1);
> > + udelay(1);
> > + mtk_seninf_input_update(input, SENINF_CTRL, CSI2_SW_RST, 0);
> > +}
> > +
> > +static void mtk_seninf_mux_setup(struct mtk_seninf_mux *mux,
> > + struct mtk_seninf_input *input,
> > + struct v4l2_subdev_state *state)
> > +{
> > + const struct mtk_seninf_format_info *fmtinfo;
> > + const struct v4l2_mbus_framefmt *format;
> > + unsigned int pix_sel_ext;
> > + unsigned int pix_sel;
> > + unsigned int hs_pol = 0;
> > + unsigned int vs_pol = 0;
> > + unsigned int val;
> > + u32 rst_mask;
> > +
> > + format = v4l2_subdev_state_get_stream_format(state, input->pad, 0);
> > + fmtinfo = mtk_seninf_format_info(format->code);
> > +
> > + /* Enable mux */
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_MUX_EN, 1);
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_SRC_SEL, SENINF_MIPI_SENSOR);
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT, SENINF_SRC_SEL_EXT, SENINF_NORMAL_MODEL);
> > +
> > + pix_sel_ext = 0;
> > + pix_sel = 1;
>
>
> pixels_per_cycle = 1;
> bus_width = pixels_per_cycle >> 1;
>
> because: 0 == 1pix/cyc, 1 == 2pix/cyc, 2 == 4pix/cyc, 3 == 8pix... etc
> ...but the width of this register depends on the SoC, so you also want to set
> constraints to the bus width on a per-soc basis (platform data again, or at
> least leave a comment here).>
> mtk_seninf_mux_update(.... PIX_SEL_EXT, bus_width);
> mtk_seninf_mux_update(.... PIX_SEL, bus_width);
>
Again, not sure to get your point here. PIX_SEL_EXT and PIX_SEL are 1 bit each
and according to the datasheet 1pix/cycle is 0 in PIX_SEL_EXT and 0 in PIX_SEL,
2 pix/cycles is 0 in PIX_SEL_EXT and 1 in PIX_SEL
and 4 pix/cycle is 1 in PIX_SEL_EXT and 0 in PIX_SEL
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT, SENINF_PIX_SEL_EXT, pix_sel_ext);
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_PIX_SEL, pix_sel);
> > +
> > + if (fmtinfo->flags & MTK_SENINF_FORMAT_JPEG) {
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FULL_WR_EN, 0);
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FLUSH_EN,
> > + FIFO_FLUSH_EN_JPEG_2_PIXEL_MODE);
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_PUSH_EN,
> > + FIFO_PUSH_EN_JPEG_2_PIXEL_MODE);
> > + } else {
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FULL_WR_EN, 2);
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FLUSH_EN,
> > + FIFO_FLUSH_EN_NORMAL_MODE);
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_PUSH_EN,
> > + FIFO_PUSH_EN_NORMAL_MODE);
> > + }
> > +
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_HSYNC_POL, hs_pol);
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_VSYNC_POL, vs_pol);
> > +
> > + val = mtk_seninf_mux_read(mux, SENINF_MUX_CTRL);
> > + rst_mask = SENINF_MUX_CTRL_SENINF_IRQ_SW_RST | SENINF_MUX_CTRL_SENINF_MUX_SW_RST;
> > +
> > + mtk_seninf_mux_write(mux, SENINF_MUX_CTRL, val | rst_mask);
>
> Are you sure that you don't need any wait between assertion and deassertion of RST?
> Looks strange, but I don't really know then.
>
> > + mtk_seninf_mux_write(mux, SENINF_MUX_CTRL, val & ~rst_mask);
> > +
> > + /* HQ */
> > + mtk_seninf_mux_write(mux, SENINF_MUX_SPARE, 0xc2000);
>
> val = SENINF_FIFO_FULL_SEL;
>
> /* SPARE field meaning is unknown */
> val |= 0xc0000;
>
> mtk_seninf_mux_write(mux, SENINF_MUX_SPARE, val);
>
> > +}
> > +
> > +static void mtk_seninf_top_mux_setup(struct mtk_seninf *priv,
> > + enum mtk_seninf_id seninf_id,
> > + struct mtk_seninf_mux *mux)
> > +{
> > + unsigned int val;
> > +
> > + /*
> > + * Use the top mux (from SENINF input to MUX) to configure routing, and
> > + * hardcode a 1:1 mapping from the MUX instances to the SENINF outputs.
> > + */
> > + val = readl(priv->base + SENINF_TOP_MUX_CTRL)
> > + & ~(0xf << (mux->mux_id * 4));
> > + val |= (seninf_id & 0xf) << (mux->mux_id * 4);
> > + writel(val, priv->base + SENINF_TOP_MUX_CTRL);
> > +
> > + writel(0x76541010, priv->base + SENINF_TOP_CAM_MUX_CTRL);
>
> Each four bits of TOP_CAM_MUX_CTRL selects between seninf1 to seninf8 muxes, and
> TOP_MUX_CTRL is laid out in the very same way.
>
> This means that if you're calculating a value for TOP_MUX_CTRL, you can do exactly
> the same for TOP_CAM_MUX_CTRL.
>
> > +}
> > +
> > +static void seninf_enable_test_pattern(struct mtk_seninf *priv,
> > + struct v4l2_subdev_state *state)
> > +{
> > + struct mtk_seninf_input *input = &priv->inputs[CSI_PORT_0];
> > + struct mtk_seninf_mux *mux = &priv->muxes[0];
> > + const struct mtk_seninf_format_info *fmtinfo;
> > + const struct v4l2_mbus_framefmt *format;
> > + unsigned int val;
> > + unsigned int pix_sel_ext;
> > + unsigned int pix_sel;
> > + unsigned int hs_pol = 0;
> > + unsigned int vs_pol = 0;
> > + unsigned int seninf = 0;
> > + unsigned int tm_size = 0;
> > + unsigned int mux_id = mux->mux_id;
> > +
> > + format = v4l2_subdev_state_get_stream_format(state, priv->conf->nb_inputs, 0);
> > + fmtinfo = mtk_seninf_format_info(format->code);
> > +
> > + mtk_seninf_update(priv, SENINF_TOP_CTRL, MUX_LP_MODE, 0);
> > +
> > + mtk_seninf_update(priv, SENINF_TOP_CTRL, SENINF_PCLK_EN, 1);
> > + mtk_seninf_update(priv, SENINF_TOP_CTRL, SENINF2_PCLK_EN, 1);
> > +
> > + mtk_seninf_input_update(input, SENINF_CTRL, SENINF_EN, 1);
> > + mtk_seninf_input_update(input, SENINF_CTRL, SENINF_SRC_SEL, 1);
> > + mtk_seninf_input_update(input, SENINF_CTRL_EXT,
> > + SENINF_TESTMDL_IP_EN, 1);
> > +
> > + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_EN, 1);
> > + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_PAT, 0xc);
> > + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_VSYNC, 4);
> > + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_DUMMYPXL, 0x28);
> > +
> > + if (fmtinfo->flags & MTK_SENINF_FORMAT_BAYER)
> > + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_FMT, 0x0);
> > + else
> > + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_FMT, 0x1);
> > +
> > + tm_size = FIELD_PREP(SENINF_TG1_TM_SIZE_TM_LINE, format->height + 8);
> > + switch (format->code) {
> > + case MEDIA_BUS_FMT_UYVY8_1X16:
> > + case MEDIA_BUS_FMT_VYUY8_1X16:
> > + case MEDIA_BUS_FMT_YUYV8_1X16:
> > + case MEDIA_BUS_FMT_YVYU8_1X16:
> > + tm_size |= FIELD_PREP(SENINF_TG1_TM_SIZE_TM_PXL, format->width * 2);
> > + break;
> > + default:
> > + tm_size |= FIELD_PREP(SENINF_TG1_TM_SIZE_TM_PXL, format->width);
> > + break;
> > + }
> > + writel(tm_size, input->base + SENINF_TG1_TM_SIZE);
> > +
> > + writel(TEST_MODEL_CLK_DIVIDED_CNT, input->base + SENINF_TG1_TM_CLK);
> > + writel(TIME_STAMP_DIVIDER, input->base + SENINF_TG1_TM_STP);
> > +
> > + /* Set top mux */
> > + val = (readl(priv->base + SENINF_TOP_MUX_CTRL) & (~(0xf << (mux_id * 4)))) |
> > + ((seninf & 0xf) << (mux_id * 4));
> > + writel(val, priv->base + SENINF_TOP_MUX_CTRL);
>
> This is duplicated, and it is the same that you have in mtk_seninf_top_mux_setup()
>
> > +
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_MUX_EN, 1);
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT,
> > + SENINF_SRC_SEL_EXT, SENINF_TEST_MODEL);
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_SRC_SEL, 1);
> > +
> > + pix_sel_ext = 0;
> > + pix_sel = 1;
> > +
>
> This is in mtk_seninf_mux_setup(), but if you apply my suggestion, it won't be in
> there anymore, so you'll call a function here to set the right value :-)
>
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT,
> > + SENINF_PIX_SEL_EXT, pix_sel_ext);
> > +
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_PIX_SEL, pix_sel);
> > +
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_PUSH_EN, 0x1f);
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FLUSH_EN, 0x1b);
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FULL_WR_EN, 2);
> > +
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_HSYNC_POL, hs_pol);
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_VSYNC_POL, vs_pol);
> > + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_HSYNC_MASK, 1);
> > +
> > + mtk_seninf_mux_write(mux, SENINF_MUX_INTEN,
> > + SENINF_IRQ_CLR_SEL | SENINF_ALL_ERR_IRQ_EN);
> > +
> > + mtk_seninf_mux_write(mux, SENINF_MUX_CTRL,
> > + mtk_seninf_mux_read(mux, SENINF_MUX_CTRL) |
> > + SENINF_MUX_CTRL_SENINF_IRQ_SW_RST |
> > + SENINF_MUX_CTRL_SENINF_MUX_SW_RST);
> > + udelay(1);
> > + mtk_seninf_mux_write(mux, SENINF_MUX_CTRL,
> > + mtk_seninf_mux_read(mux, SENINF_MUX_CTRL) &
> > + ~(SENINF_MUX_CTRL_SENINF_IRQ_SW_RST |
> > + SENINF_MUX_CTRL_SENINF_MUX_SW_RST));
> > +
> > + //check this
> > + writel(0x76540010, priv->base + SENINF_TOP_CAM_MUX_CTRL);
> > +
> > + dev_dbg(priv->dev, "%s: OK\n", __func__);
> > +}
> > +
>
> Cheers,
> Angelo
>
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 3/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 sensor interface
2024-01-10 14:14 ` [PATCH v4 3/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 sensor interface Julien Stephan
2024-01-11 2:46 ` CK Hu (胡俊光)
2024-01-11 12:04 ` AngeloGioacchino Del Regno
@ 2024-02-15 9:21 ` Sakari Ailus
2024-03-20 9:04 ` CK Hu (胡俊光)
3 siblings, 0 replies; 28+ messages in thread
From: Sakari Ailus @ 2024-02-15 9:21 UTC (permalink / raw)
To: Julien Stephan
Cc: Louis Kuo, Phi-bang Nguyen, Florian Sylvestre, Laurent Pinchart,
Andy Hsieh, AngeloGioacchino Del Regno, Conor Dooley, devicetree,
Krzysztof Kozlowski, linux-arm-kernel, linux-kernel,
linux-mediatek, linux-media, Matthias Brugger,
Mauro Carvalho Chehab, Paul Elder, Rob Herring
Hi Julien,
Thanks for the patch.
On Wed, Jan 10, 2024 at 03:14:40PM +0100, Julien Stephan wrote:
> From: Louis Kuo <louis.kuo@mediatek.com>
>
> This will add the mediatek ISP3.0 seninf (sensor interface) driver found
> on several Mediatek SoCs such as the mt8365.
>
> Then seninf module has 4 physical CSI-2 inputs. Depending on the soc they
> may not be all connected.
>
> Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
> Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
> MAINTAINERS | 1 +
> drivers/media/platform/mediatek/Kconfig | 1 +
> drivers/media/platform/mediatek/Makefile | 1 +
> drivers/media/platform/mediatek/isp/Kconfig | 2 +
> drivers/media/platform/mediatek/isp/Makefile | 3 +
> .../platform/mediatek/isp/isp_30/Kconfig | 16 +
> .../platform/mediatek/isp/isp_30/Makefile | 3 +
> .../mediatek/isp/isp_30/seninf/Makefile | 5 +
> .../mediatek/isp/isp_30/seninf/mtk_seninf.c | 1488 +++++++++++++++++
> .../isp/isp_30/seninf/mtk_seninf_reg.h | 112 ++
> 10 files changed, 1632 insertions(+)
> create mode 100644 drivers/media/platform/mediatek/isp/Kconfig
> create mode 100644 drivers/media/platform/mediatek/isp/Makefile
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/Kconfig
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/Makefile
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3ea2158864e1..52d200d5e36c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13618,6 +13618,7 @@ M: Andy Hsieh <andy.hsieh@mediatek.com>
> S: Supported
> F: Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
> F: Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
> +F: drivers/media/platform/mediatek/isp/isp_30/seninf/*
>
> MEDIATEK SMI DRIVER
> M: Yong Wu <yong.wu@mediatek.com>
> diff --git a/drivers/media/platform/mediatek/Kconfig b/drivers/media/platform/mediatek/Kconfig
> index 84104e2cd024..4e0a5a43f35e 100644
> --- a/drivers/media/platform/mediatek/Kconfig
> +++ b/drivers/media/platform/mediatek/Kconfig
> @@ -7,3 +7,4 @@ source "drivers/media/platform/mediatek/mdp/Kconfig"
> source "drivers/media/platform/mediatek/vcodec/Kconfig"
> source "drivers/media/platform/mediatek/vpu/Kconfig"
> source "drivers/media/platform/mediatek/mdp3/Kconfig"
> +source "drivers/media/platform/mediatek/isp/Kconfig"
> diff --git a/drivers/media/platform/mediatek/Makefile b/drivers/media/platform/mediatek/Makefile
> index 38e6ba917fe5..695f05f525a6 100644
> --- a/drivers/media/platform/mediatek/Makefile
> +++ b/drivers/media/platform/mediatek/Makefile
> @@ -4,3 +4,4 @@ obj-y += mdp/
> obj-y += vcodec/
> obj-y += vpu/
> obj-y += mdp3/
> +obj-y += isp/
> diff --git a/drivers/media/platform/mediatek/isp/Kconfig b/drivers/media/platform/mediatek/isp/Kconfig
> new file mode 100644
> index 000000000000..708b9a6660d2
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/Kconfig
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +source "drivers/media/platform/mediatek/isp/isp_30/Kconfig"
> diff --git a/drivers/media/platform/mediatek/isp/Makefile b/drivers/media/platform/mediatek/isp/Makefile
> new file mode 100644
> index 000000000000..a81ab33d0dd3
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +
> +obj-y += isp_30/
> diff --git a/drivers/media/platform/mediatek/isp/isp_30/Kconfig b/drivers/media/platform/mediatek/isp/isp_30/Kconfig
> new file mode 100644
> index 000000000000..9791312589fb
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/isp_30/Kconfig
> @@ -0,0 +1,16 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +config MTK_SENINF30
> + tristate "MediaTek ISP3.0 SENINF driver"
> + depends on VIDEO_V4L2_SUBDEV_API
> + depends on MEDIA_CAMERA_SUPPORT
> + depends on ARCH_MEDIATEK || COMPILE_TEST
> + depends on OF
> + select V4L2_FWNODE
> + default n
> + help
> + This driver provides a MIPI CSI-2 receiver interface to connect
> + an external camera module with MediaTek ISP3.0. It is able to handle
> + multiple cameras at the same time.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called mtk-seninf.
> diff --git a/drivers/media/platform/mediatek/isp/isp_30/Makefile b/drivers/media/platform/mediatek/isp/isp_30/Makefile
> new file mode 100644
> index 000000000000..ac3142de4739
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/isp_30/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +obj-$(CONFIG_MTK_SENINF30) += seninf/
> diff --git a/drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile b/drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile
> new file mode 100644
> index 000000000000..f28480d6d6c3
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile
> @@ -0,0 +1,5 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +mtk-seninf-objs += mtk_seninf.o
> +
> +obj-$(CONFIG_MTK_SENINF30) += mtk-seninf.o
> diff --git a/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c
> new file mode 100644
> index 000000000000..67b2c697d9ca
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c
> @@ -0,0 +1,1488 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2022 MediaTek Inc.
> + */
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/of_graph.h>
> +#include <linux/of_platform.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/videodev2.h>
> +#include <media/media-device.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-common.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-dev.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-mc.h>
> +#include <media/v4l2-subdev.h>
> +
> +#include "mtk_seninf_reg.h"
> +
> +#define SENINF_TIMESTAMP_STEP 0x67
> +#define SENINF_SETTLE_DELAY 0x15
> +#define SENINF_HS_TRAIL_PARAMETER 0x8
> +
> +#define SENINF_MAX_NUM_INPUTS 4
> +#define SENINF_MAX_NUM_OUTPUTS 6
> +#define SENINF_MAX_NUM_MUXES 6
> +#define SENINF_MAX_NUM_PADS (SENINF_MAX_NUM_INPUTS + \
> + SENINF_MAX_NUM_OUTPUTS)
> +
> +#define SENINF_DEFAULT_BUS_FMT MEDIA_BUS_FMT_SGRBG10_1X10
> +#define SENINF_DEFAULT_WIDTH 1920
> +#define SENINF_DEFAULT_HEIGHT 1080
> +
> +#define SENINF_PAD_10BIT 0
> +
> +#define SENINF_TEST_MODEL 0
> +#define SENINF_NORMAL_MODEL 1
> +#define SENINF_ALL_ERR_IRQ_EN 0x7f
> +#define SENINF_IRQ_CLR_SEL 0x80000000
> +
> +#define SENINF_MIPI_SENSOR 0x8
> +
> +#define MTK_CSI_MAX_LANES 4
> +
> +/* Port number in the device tree. */
> +enum mtk_seninf_port {
> + CSI_PORT_0 = 0, /* 4D1C or 2D1C */
> + CSI_PORT_1, /* 4D1C */
> + CSI_PORT_2, /* 4D1C */
> + CSI_PORT_0B, /* 2D1C */
> +};
> +
> +enum mtk_seninf_id {
> + SENINF_1 = 0,
> + SENINF_2 = 1,
> + SENINF_3 = 2,
> + SENINF_5 = 4,
> +};
> +
> +static const u32 port_to_seninf_id[] = {
> + [CSI_PORT_0] = SENINF_1,
> + [CSI_PORT_1] = SENINF_3,
> + [CSI_PORT_2] = SENINF_5,
> + [CSI_PORT_0B] = SENINF_2,
> +};
> +
> +enum mtk_seninf_phy_mode {
> + SENINF_PHY_MODE_NONE,
> + SENINF_PHY_MODE_4D1C,
> + SENINF_PHY_MODE_2D1C,
> +};
> +
> +enum mtk_seninf_format_flag {
> + MTK_SENINF_FORMAT_BAYER = BIT(0),
> + MTK_SENINF_FORMAT_DPCM = BIT(1),
> + MTK_SENINF_FORMAT_JPEG = BIT(2),
> + MTK_SENINF_FORMAT_INPUT_ONLY = BIT(3),
> +};
> +
> +/**
> + * struct mtk_seninf_conf - Model-specific SENINF parameters
> + * @model: Model description
> + * @nb_inputs: Number of SENINF inputs
> + * @nb_muxes: Number of SENINF MUX (FIFO) instances
> + * @nb_outputs: Number of outputs (to CAM and CAMSV instances)
> + */
> +struct mtk_seninf_conf {
> + const char *model;
> + u8 nb_inputs;
> + u8 nb_muxes;
> + u8 nb_outputs;
> +};
> +
> +/**
> + * struct mtk_seninf_format_info - Information about media bus formats
> + * @code: V4L2 media bus code
> + * @flags: Flags describing the format, as a combination of MTK_SENINF_FORMAT_*
> + */
> +struct mtk_seninf_format_info {
> + u32 code;
> + u32 flags;
> +};
> +
> +/**
> + * struct mtk_seninf_input - SENINF input block
> + * @pad: DT port and media entity pad number
> + * @seninf_id: SENINF hardware instance ID
> + * @base: Memory mapped I/O based address
> + * @seninf: Back pointer to the mtk_seninf
> + * @phy: PHY connected to the input
> + * @phy_mode: PHY operation mode (NONE when the input is not connected)
> + * @bus: CSI-2 bus configuration from DT
> + * @source_sd: Source subdev connected to the input
> + */
> +struct mtk_seninf_input {
> + enum mtk_seninf_port pad;
> + enum mtk_seninf_id seninf_id;
> + void __iomem *base;
> + struct mtk_seninf *seninf;
> +
> + struct phy *phy;
> + enum mtk_seninf_phy_mode phy_mode;
> +
> + struct v4l2_mbus_config_mipi_csi2 bus;
> +
> + struct v4l2_subdev *source_sd;
> +};
> +
> +/**
> + * struct mtk_seninf_mux - SENINF MUX channel
> + * @pad: DT port and media entity pad number
> + * @mux_id: MUX hardware instance ID
> + * @base: Memory mapped I/O based address
> + * @seninf: Back pointer to the mtk_seninf
> + */
> +struct mtk_seninf_mux {
> + unsigned int pad;
> + unsigned int mux_id;
> + void __iomem *base;
> + struct mtk_seninf *seninf;
> +};
> +
> +/**
> + * struct mtk_seninf - Top-level SENINF device
> + * @dev: The (platform) device
> + * @phy: PHYs at the SENINF inputs
> + * @num_clks: Number of clocks in the clks array
> + * @clks: Clocks
> + * @base: Memory mapped I/O base address
> + * @media_dev: Media controller device
> + * @v4l2_dev: V4L2 device
> + * @subdev: V4L2 subdevice
> + * @pads: Media entity pads
> + * @notifier: V4L2 async notifier for source subdevs
> + * @ctrl_handler: V4L2 controls handler
> + * @source_format: Active format on the source pad
> + * @inputs: Array of SENINF inputs
> + * @muxes: Array of MUXes
> + * @conf: Model-specific SENINF parameters
> + * @is_testmode: Whether or not the test pattern generator is enabled
> + */
> +struct mtk_seninf {
> + struct device *dev;
> + struct phy *phy[5];
> + unsigned int num_clks;
> + struct clk_bulk_data *clks;
> + void __iomem *base;
> +
> + struct media_device media_dev;
> + struct v4l2_device v4l2_dev;
> + struct v4l2_subdev subdev;
> + struct media_pad pads[SENINF_MAX_NUM_PADS];
> + struct v4l2_async_notifier notifier;
> + struct v4l2_ctrl_handler ctrl_handler;
> +
> + struct mtk_seninf_input inputs[SENINF_MAX_NUM_INPUTS];
> + struct mtk_seninf_mux muxes[SENINF_MAX_NUM_MUXES];
> +
> + const struct mtk_seninf_conf *conf;
> +
> + bool is_testmode;
> +};
> +
> +inline struct mtk_seninf *sd_to_mtk_seninf(struct v4l2_subdev *sd)
> +{
> + return container_of(sd, struct mtk_seninf, subdev);
> +}
> +
> +static inline bool mtk_seninf_pad_is_sink(struct mtk_seninf *priv,
> + unsigned int pad)
> +{
> + return pad < priv->conf->nb_inputs;
It'd be a bit cleaner to test pad flags instead.
> +}
> +
> +static inline bool mtk_seninf_pad_is_source(struct mtk_seninf *priv,
> + unsigned int pad)
> +{
> + return !mtk_seninf_pad_is_sink(priv, pad);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Formats
> + */
> +
> +static const struct mtk_seninf_format_info mtk_seninf_formats[] = {
> + {
> + .code = MEDIA_BUS_FMT_SBGGR8_1X8,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SGBRG8_1X8,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SGRBG8_1X8,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SRGGB8_1X8,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SGRBG10_1X10,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SRGGB10_1X10,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SBGGR10_1X10,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SGBRG10_1X10,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SBGGR12_1X12,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SGBRG12_1X12,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SGRBG12_1X12,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SRGGB12_1X12,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SBGGR14_1X14,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SGBRG14_1X14,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SGRBG14_1X14,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SRGGB14_1X14,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SBGGR16_1X16,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SGBRG16_1X16,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SGRBG16_1X16,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_SRGGB16_1X16,
> + .flags = MTK_SENINF_FORMAT_BAYER,
> + }, {
> + .code = MEDIA_BUS_FMT_UYVY8_1X16,
> + }, {
> + .code = MEDIA_BUS_FMT_VYUY8_1X16,
> + }, {
> + .code = MEDIA_BUS_FMT_YUYV8_1X16,
> + }, {
> + .code = MEDIA_BUS_FMT_YVYU8_1X16,
> + }, {
> + .code = MEDIA_BUS_FMT_JPEG_1X8,
> + .flags = MTK_SENINF_FORMAT_JPEG,
> + }, {
> + .code = MEDIA_BUS_FMT_S5C_UYVY_JPEG_1X8,
> + .flags = MTK_SENINF_FORMAT_JPEG,
> + },
> + /* Keep the input-only formats last. */
> + {
> + .code = MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8,
> + .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY,
> + }, {
> + .code = MEDIA_BUS_FMT_SRGGB10_DPCM8_1X8,
> + .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY,
> + }, {
> + .code = MEDIA_BUS_FMT_SBGGR10_DPCM8_1X8,
> + .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY,
> + }, {
> + .code = MEDIA_BUS_FMT_SGBRG10_DPCM8_1X8,
> + .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY,
> + }
> +};
> +
> +static const struct mtk_seninf_format_info *mtk_seninf_format_info(u32 code)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(mtk_seninf_formats); ++i) {
> + if (mtk_seninf_formats[i].code == code)
> + return &mtk_seninf_formats[i];
> + }
> +
> + return NULL;
> +}
> +
> +static void __mtk_seninf_update(struct mtk_seninf *priv, u32 reg,
> + u32 mask, u32 value)
> +{
> + u32 val = readl(priv->base + reg);
> +
> + writel((val & ~mask) | (value & mask), priv->base + reg);
> +}
> +
> +#define mtk_seninf_update(priv, reg, field, val) \
> + __mtk_seninf_update(priv, reg, reg##_##field, \
Please align the backslashes.
> + FIELD_PREP(reg##_##field, val))
> +
> +static void __mtk_seninf_input_update(struct mtk_seninf_input *input, u32 reg,
> + u32 mask, u32 value)
> +{
> + u32 val = readl(input->base + reg);
> +
> + writel((val & ~mask) | (value & mask), input->base + reg);
> +}
> +
> +#define mtk_seninf_input_update(input, reg, field, val) \
> + __mtk_seninf_input_update(input, reg, reg##_##field, \
> + FIELD_PREP(reg##_##field, val))
> +
> +static u32 mtk_seninf_mux_read(struct mtk_seninf_mux *mux, u32 reg)
> +{
> + return readl(mux->base + reg);
> +}
> +
> +static void mtk_seninf_mux_write(struct mtk_seninf_mux *mux, u32 reg,
> + u32 value)
> +{
> + writel(value, mux->base + reg);
> +}
> +
> +static void __mtk_seninf_mux_update(struct mtk_seninf_mux *mux, u32 reg,
> + u32 mask, u32 value)
> +{
> + u32 val = mtk_seninf_mux_read(mux, reg);
> +
> + mtk_seninf_mux_write(mux, reg, (val & ~mask) | (value & mask));
> +}
> +
> +#define mtk_seninf_mux_update(mux, reg, field, val) \
> + __mtk_seninf_mux_update(mux, reg, reg##_##field, \
> + FIELD_PREP(reg##_##field, val))
> +
> +/* -----------------------------------------------------------------------------
> + * Hardware Configuration
> + *
> + * The SENINF is the camera sensor interface. On the input side it contains
> + * input channels (also named SENINF), each made of a CSI-2 receiver, an
> + * interface for parallel sensors, and a test pattern generator. The inputs are
> + * routed through a N:M crossbar switch (TOP MUX) to VC/DT filters with a FIFO
> + * (MUX). The MUX are routed to another N:M crossbar switch (CAM MUX), whose
> + * output is then connected to other IP cores.
> + *
> + * +-------------------------------------------------------+
> + * | SENINF |
> + * | |
> + * +-------+ | +----------+ TOP MUX |
> + * | | | | SENINF | |\ CAM MUX |
> + * | D-PHY | ---> | CSI-2 RX | ---> | | +------------+ |\ |
> + * | | | | TPG | -> | | ---> | MUX (FIFO) | ---> | | ---> CAMSV
> + * +-------+ | +----------+ -> | | +------------+ -> | | |
> + * | |/ -> | | |
> + * | |/ |
> + * | |
> + * ... | ... ... --->
> + * | |
> + * | |
> + * +-------------------------------------------------------+
> + *
> + * The number of PHYs, SENINF and MUX differ between SoCs. MT8167 has a single
> + * MUX and thus no output CAM MUX crossbar switch.
> + */
> +
> +static void mtk_seninf_csi2_setup_phy(struct mtk_seninf *priv)
> +{
> + /* CSI0 */
> + if (priv->inputs[CSI_PORT_0].phy) {
> + struct mtk_seninf_input *input = &priv->inputs[CSI_PORT_0];
> +
> + mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI0,
> + DPHY_MODE, 0 /* 4D1C*/);
> + mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI0,
> + CK_SEL_1, input->bus.clock_lane);
> + mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI0,
> + CK_SEL_2, 2);
> + mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI0,
> + PHY_SENINF_LANE_MUX_CSI0_EN, 1);
> + }
> +
> + /* CSI1 */
> + if (priv->inputs[CSI_PORT_1].phy) {
> + struct mtk_seninf_input *input = &priv->inputs[CSI_PORT_1];
> +
> + mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI1,
> + DPHY_MODE, 0 /* 4D1C */);
> + mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI1,
> + CK_SEL_1, input->bus.clock_lane);
> + mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI1,
> + PHY_SENINF_LANE_MUX_CSI1_EN, 1);
> + }
> +}
> +
> +static void mtk_seninf_input_setup_csi2_rx(struct mtk_seninf_input *input)
> +{
> + unsigned int lanes[MTK_CSI_MAX_LANES] = { };
> + unsigned int i;
> +
> + /*
> + * Configure data lane muxing. In 2D1C mode, lanes 0 to 2 correspond to
> + * CSIx[AB]_L{0,1,2}, and in 4D1C lanes 0 to 5 correspond to
> + * CSIxA_L{0,1,2}, CSIxB_L{0,1,2}.
> + *
> + * The clock lane must be skipped when calculating the index of the
> + * physical data lane. For instance, in 4D1C mode, the sensor clock
> + * lane is typically connected to lane 2 (CSIxA_L2), and the sensor
> + * data lanes 0-3 to lanes 1 (CSIxA_L1), 3 (CSIxB_L0), 0 (CSIxA_L0) and
> + * 4 (CSIxB_L1). The when skipping the clock lane, the data lane
> + * indices become 1, 2, 0 and 3.
> + */
> + for (i = 0; i < input->bus.num_data_lanes; ++i) {
> + lanes[i] = input->bus.data_lanes[i];
> + if (lanes[i] > input->bus.clock_lane)
> + lanes[i]--;
> + }
> +
> + mtk_seninf_input_update(input, MIPI_RX_CON24_CSI0, CSI0_BIST_LN0_MUX, lanes[0]);
> + mtk_seninf_input_update(input, MIPI_RX_CON24_CSI0, CSI0_BIST_LN1_MUX, lanes[1]);
> + mtk_seninf_input_update(input, MIPI_RX_CON24_CSI0, CSI0_BIST_LN2_MUX, lanes[2]);
> + mtk_seninf_input_update(input, MIPI_RX_CON24_CSI0, CSI0_BIST_LN3_MUX, lanes[3]);
> +}
> +
> +static void mtk_seninf_input_setup_csi2(struct mtk_seninf_input *input,
> + struct v4l2_subdev_state *state)
> +{
> + const struct mtk_seninf_format_info *fmtinfo;
> + const struct v4l2_mbus_framefmt *format;
> + unsigned int num_data_lanes = input->bus.num_data_lanes;
> + unsigned int val = 0;
u32?
> +
> + format = v4l2_subdev_state_get_stream_format(state, input->pad, 0);
> + fmtinfo = mtk_seninf_format_info(format->code);
> +
> + /* Configure timestamp */
> + writel(SENINF_TIMESTAMP_STEP, input->base + SENINF_TG1_TM_STP);
> +
> + /* HQ */
> + writel(0x0, input->base + SENINF_TG1_PH_CNT);
> + writel(0x10001, input->base + SENINF_TG1_SEN_CK);
> +
> + /* First Enable Sensor interface and select pad (0x1a04_0200) */
> + mtk_seninf_input_update(input, SENINF_CTRL, SENINF_EN, 1);
> + mtk_seninf_input_update(input, SENINF_CTRL, PAD2CAM_DATA_SEL, SENINF_PAD_10BIT);
> + mtk_seninf_input_update(input, SENINF_CTRL, SENINF_SRC_SEL, 0);
> + mtk_seninf_input_update(input, SENINF_CTRL_EXT, SENINF_CSI2_IP_EN, 1);
> + mtk_seninf_input_update(input, SENINF_CTRL_EXT, SENINF_NCSI2_IP_EN, 0);
> +
> + /* DPCM Enable */
> + if (fmtinfo->flags & MTK_SENINF_FORMAT_DPCM)
> + val = SENINF_CSI2_DPCM_DI_2A_DPCM_EN;
> + else
> + val = SENINF_CSI2_DPCM_DI_30_DPCM_EN;
> + writel(val, input->base + SENINF_CSI2_DPCM);
> +
> + /* Settle delay */
> + mtk_seninf_input_update(input, SENINF_CSI2_LNRD_TIMING,
> + DATA_SETTLE_PARAMETER, SENINF_SETTLE_DELAY);
> +
> + /* HQ */
> + writel(0x10, input->base + SENINF_CSI2_LNRC_FSM);
> +
> + /* CSI2 control */
> + val = readl(input->base + SENINF_CSI2_CTL)
> + | (FIELD_PREP(SENINF_CSI2_CTL_ED_SEL, DATA_HEADER_ORDER_DI_WCL_WCH)
> + | SENINF_CSI2_CTL_CLOCK_LANE_EN | (BIT(num_data_lanes) - 1));
These two lines should be aligned right of "= ", not at it.
> + writel(val, input->base + SENINF_CSI2_CTL);
> +
> + mtk_seninf_input_update(input, SENINF_CSI2_RESYNC_MERGE_CTL,
> + BYPASS_LANE_RESYNC, 0);
> + mtk_seninf_input_update(input, SENINF_CSI2_RESYNC_MERGE_CTL, CDPHY_SEL, 0);
> + mtk_seninf_input_update(input, SENINF_CSI2_RESYNC_MERGE_CTL,
> + CPHY_LANE_RESYNC_CNT, 3);
> + mtk_seninf_input_update(input, SENINF_CSI2_MODE, CSR_CSI2_MODE, 0);
> + mtk_seninf_input_update(input, SENINF_CSI2_MODE, CSR_CSI2_HEADER_LEN, 0);
> + mtk_seninf_input_update(input, SENINF_CSI2_DPHY_SYNC, SYNC_SEQ_MASK_0, 0xff00);
> + mtk_seninf_input_update(input, SENINF_CSI2_DPHY_SYNC, SYNC_SEQ_PAT_0, 0x001d);
> +
> + mtk_seninf_input_update(input, SENINF_CSI2_CTL, CLOCK_HS_OPTION, 0);
> + mtk_seninf_input_update(input, SENINF_CSI2_CTL, HSRX_DET_EN, 0);
> + mtk_seninf_input_update(input, SENINF_CSI2_CTL, HS_TRAIL_EN, 1);
> + mtk_seninf_input_update(input, SENINF_CSI2_HS_TRAIL, HS_TRAIL_PARAMETER,
> + SENINF_HS_TRAIL_PARAMETER);
> +
> + /* Set debug port to output packet number */
> + mtk_seninf_input_update(input, SENINF_CSI2_DGB_SEL, DEBUG_EN, 1);
> + mtk_seninf_input_update(input, SENINF_CSI2_DGB_SEL, DEBUG_SEL, 0x1a);
> +
> + /* HQ */
> + writel(0xfffffffe, input->base + SENINF_CSI2_SPARE0);
> +
> + /* Enable CSI2 IRQ mask */
> + /* Turn on all interrupt */
> + writel(0xffffffff, input->base + SENINF_CSI2_INT_EN);
> + /* Write clear CSI2 IRQ */
> + writel(0xffffffff, input->base + SENINF_CSI2_INT_STATUS);
> + /* Enable CSI2 Extend IRQ mask */
> + /* Turn on all interrupt */
> + mtk_seninf_input_update(input, SENINF_CTRL, CSI2_SW_RST, 1);
> + udelay(1);
> + mtk_seninf_input_update(input, SENINF_CTRL, CSI2_SW_RST, 0);
> +}
> +
> +static void mtk_seninf_mux_setup(struct mtk_seninf_mux *mux,
> + struct mtk_seninf_input *input,
> + struct v4l2_subdev_state *state)
> +{
> + const struct mtk_seninf_format_info *fmtinfo;
> + const struct v4l2_mbus_framefmt *format;
> + unsigned int pix_sel_ext;
> + unsigned int pix_sel;
> + unsigned int hs_pol = 0;
> + unsigned int vs_pol = 0;
> + unsigned int val;
> + u32 rst_mask;
> +
> + format = v4l2_subdev_state_get_stream_format(state, input->pad, 0);
> + fmtinfo = mtk_seninf_format_info(format->code);
> +
> + /* Enable mux */
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_MUX_EN, 1);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_SRC_SEL, SENINF_MIPI_SENSOR);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT, SENINF_SRC_SEL_EXT, SENINF_NORMAL_MODEL);
Could you run
./scripts/checkpatch.pl --strict --max-line-length=80
on the set?
There are probably reasons to do otherwise for e.g. register definitions or
where you really can't do that without breaking other CodingStyle rules.
> +
> + pix_sel_ext = 0;
> + pix_sel = 1;
These local variables are redundant.
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT, SENINF_PIX_SEL_EXT, pix_sel_ext);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_PIX_SEL, pix_sel);
> +
> + if (fmtinfo->flags & MTK_SENINF_FORMAT_JPEG) {
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FULL_WR_EN, 0);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FLUSH_EN,
> + FIFO_FLUSH_EN_JPEG_2_PIXEL_MODE);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_PUSH_EN,
> + FIFO_PUSH_EN_JPEG_2_PIXEL_MODE);
> + } else {
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FULL_WR_EN, 2);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FLUSH_EN,
> + FIFO_FLUSH_EN_NORMAL_MODE);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_PUSH_EN,
> + FIFO_PUSH_EN_NORMAL_MODE);
> + }
> +
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_HSYNC_POL, hs_pol);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_VSYNC_POL, vs_pol);
Same for vs_pol. Or should you get the value from the endpoint?
> +
> + val = mtk_seninf_mux_read(mux, SENINF_MUX_CTRL);
> + rst_mask = SENINF_MUX_CTRL_SENINF_IRQ_SW_RST | SENINF_MUX_CTRL_SENINF_MUX_SW_RST;
> +
> + mtk_seninf_mux_write(mux, SENINF_MUX_CTRL, val | rst_mask);
> + mtk_seninf_mux_write(mux, SENINF_MUX_CTRL, val & ~rst_mask);
> +
> + /* HQ */
> + mtk_seninf_mux_write(mux, SENINF_MUX_SPARE, 0xc2000);
> +}
> +
> +static void mtk_seninf_top_mux_setup(struct mtk_seninf *priv,
> + enum mtk_seninf_id seninf_id,
> + struct mtk_seninf_mux *mux)
> +{
> + unsigned int val;
> +
> + /*
> + * Use the top mux (from SENINF input to MUX) to configure routing, and
> + * hardcode a 1:1 mapping from the MUX instances to the SENINF outputs.
> + */
> + val = readl(priv->base + SENINF_TOP_MUX_CTRL)
> + & ~(0xf << (mux->mux_id * 4));
Alignment.
> + val |= (seninf_id & 0xf) << (mux->mux_id * 4);
> + writel(val, priv->base + SENINF_TOP_MUX_CTRL);
> +
> + writel(0x76541010, priv->base + SENINF_TOP_CAM_MUX_CTRL);
What does this do? A comment would be nice, and even nicer it would be to
have a macro (or macros) for constructing this magic number using them.
> +}
> +
> +static void seninf_enable_test_pattern(struct mtk_seninf *priv,
> + struct v4l2_subdev_state *state)
> +{
> + struct mtk_seninf_input *input = &priv->inputs[CSI_PORT_0];
> + struct mtk_seninf_mux *mux = &priv->muxes[0];
> + const struct mtk_seninf_format_info *fmtinfo;
> + const struct v4l2_mbus_framefmt *format;
> + unsigned int val;
> + unsigned int pix_sel_ext;
> + unsigned int pix_sel;
> + unsigned int hs_pol = 0;
> + unsigned int vs_pol = 0;
> + unsigned int seninf = 0;
> + unsigned int tm_size = 0;
> + unsigned int mux_id = mux->mux_id;
> +
> + format = v4l2_subdev_state_get_stream_format(state, priv->conf->nb_inputs, 0);
> + fmtinfo = mtk_seninf_format_info(format->code);
> +
> + mtk_seninf_update(priv, SENINF_TOP_CTRL, MUX_LP_MODE, 0);
> +
> + mtk_seninf_update(priv, SENINF_TOP_CTRL, SENINF_PCLK_EN, 1);
> + mtk_seninf_update(priv, SENINF_TOP_CTRL, SENINF2_PCLK_EN, 1);
> +
> + mtk_seninf_input_update(input, SENINF_CTRL, SENINF_EN, 1);
> + mtk_seninf_input_update(input, SENINF_CTRL, SENINF_SRC_SEL, 1);
> + mtk_seninf_input_update(input, SENINF_CTRL_EXT,
> + SENINF_TESTMDL_IP_EN, 1);
> +
> + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_EN, 1);
> + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_PAT, 0xc);
> + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_VSYNC, 4);
> + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_DUMMYPXL, 0x28);
> +
> + if (fmtinfo->flags & MTK_SENINF_FORMAT_BAYER)
> + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_FMT, 0x0);
> + else
> + mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_FMT, 0x1);
> +
> + tm_size = FIELD_PREP(SENINF_TG1_TM_SIZE_TM_LINE, format->height + 8);
> + switch (format->code) {
> + case MEDIA_BUS_FMT_UYVY8_1X16:
> + case MEDIA_BUS_FMT_VYUY8_1X16:
> + case MEDIA_BUS_FMT_YUYV8_1X16:
> + case MEDIA_BUS_FMT_YVYU8_1X16:
> + tm_size |= FIELD_PREP(SENINF_TG1_TM_SIZE_TM_PXL, format->width * 2);
> + break;
> + default:
> + tm_size |= FIELD_PREP(SENINF_TG1_TM_SIZE_TM_PXL, format->width);
> + break;
> + }
> + writel(tm_size, input->base + SENINF_TG1_TM_SIZE);
> +
> + writel(TEST_MODEL_CLK_DIVIDED_CNT, input->base + SENINF_TG1_TM_CLK);
> + writel(TIME_STAMP_DIVIDER, input->base + SENINF_TG1_TM_STP);
> +
> + /* Set top mux */
> + val = (readl(priv->base + SENINF_TOP_MUX_CTRL) & (~(0xf << (mux_id * 4)))) |
> + ((seninf & 0xf) << (mux_id * 4));
> + writel(val, priv->base + SENINF_TOP_MUX_CTRL);
> +
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_MUX_EN, 1);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT,
> + SENINF_SRC_SEL_EXT, SENINF_TEST_MODEL);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_SRC_SEL, 1);
> +
> + pix_sel_ext = 0;
> + pix_sel = 1;
> +
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT,
> + SENINF_PIX_SEL_EXT, pix_sel_ext);
> +
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_PIX_SEL, pix_sel);
> +
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_PUSH_EN, 0x1f);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FLUSH_EN, 0x1b);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FULL_WR_EN, 2);
> +
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_HSYNC_POL, hs_pol);
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_VSYNC_POL, vs_pol);
These seem to be redundant.
> + mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_HSYNC_MASK, 1);
> +
> + mtk_seninf_mux_write(mux, SENINF_MUX_INTEN,
> + SENINF_IRQ_CLR_SEL | SENINF_ALL_ERR_IRQ_EN);
> +
> + mtk_seninf_mux_write(mux, SENINF_MUX_CTRL,
> + mtk_seninf_mux_read(mux, SENINF_MUX_CTRL) |
> + SENINF_MUX_CTRL_SENINF_IRQ_SW_RST |
> + SENINF_MUX_CTRL_SENINF_MUX_SW_RST);
> + udelay(1);
> + mtk_seninf_mux_write(mux, SENINF_MUX_CTRL,
> + mtk_seninf_mux_read(mux, SENINF_MUX_CTRL) &
> + ~(SENINF_MUX_CTRL_SENINF_IRQ_SW_RST |
> + SENINF_MUX_CTRL_SENINF_MUX_SW_RST));
> +
> + //check this
/* comment */
> + writel(0x76540010, priv->base + SENINF_TOP_CAM_MUX_CTRL);
> +
> + dev_dbg(priv->dev, "%s: OK\n", __func__);
This can certainly be removed.
> +}
> +
> +static void mtk_seninf_start(struct mtk_seninf *priv,
> + struct v4l2_subdev_state *state,
> + struct mtk_seninf_input *input,
> + struct mtk_seninf_mux *mux)
> +{
> + phy_power_on(input->phy);
> +
> + mtk_seninf_input_setup_csi2_rx(input);
> + mtk_seninf_input_setup_csi2(input, state);
> +
> + mtk_seninf_mux_setup(mux, input, state);
> + mtk_seninf_top_mux_setup(priv, input->seninf_id, mux);
> +}
> +
> +static void mtk_seninf_stop(struct mtk_seninf *priv,
> + struct mtk_seninf_input *input)
> +{
> + unsigned int val;
> +
> + /* Disable CSI2(2.5G) first */
> + val = readl(input->base + SENINF_CSI2_CTL);
> + val &= ~(SENINF_CSI2_CTL_CLOCK_LANE_EN |
> + SENINF_CSI2_CTL_DATA_LANE3_EN |
> + SENINF_CSI2_CTL_DATA_LANE2_EN |
> + SENINF_CSI2_CTL_DATA_LANE1_EN |
> + SENINF_CSI2_CTL_DATA_LANE0_EN);
> + writel(val, input->base + SENINF_CSI2_CTL);
> +
> + if (!priv->is_testmode)
> + phy_power_off(input->phy);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * V4L2 Controls
> + */
> +
> +static int seninf_set_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct mtk_seninf *priv = container_of(ctrl->handler,
> + struct mtk_seninf, ctrl_handler);
> +
> + switch (ctrl->id) {
> + case V4L2_CID_TEST_PATTERN:
> + priv->is_testmode = !!ctrl->val;
You could instead store the pointer to the control and use ctrl->val where
you need this.
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static const struct v4l2_ctrl_ops seninf_ctrl_ops = {
> + .s_ctrl = seninf_set_ctrl,
> +};
> +
> +static const char *const seninf_test_pattern_menu[] = {
> + "No test pattern",
> + "Static horizontal color bars",
> +};
> +
> +static int seninf_initialize_controls(struct mtk_seninf *priv)
> +{
> + struct v4l2_ctrl_handler *handler;
> + int ret;
> +
> + handler = &priv->ctrl_handler;
> + ret = v4l2_ctrl_handler_init(handler, 2);
> + if (ret)
> + return ret;
> +
> + v4l2_ctrl_new_std_menu_items(handler, &seninf_ctrl_ops,
> + V4L2_CID_TEST_PATTERN,
> + ARRAY_SIZE(seninf_test_pattern_menu) - 1,
> + 0, 0, seninf_test_pattern_menu);
> +
> + priv->is_testmode = false;
> +
> + if (handler->error) {
> + ret = handler->error;
> + dev_err(priv->dev,
> + "Failed to init controls(%d)\n", ret);
> + v4l2_ctrl_handler_free(handler);
> + return ret;
> + }
> +
> + priv->subdev.ctrl_handler = handler;
> +
> + return 0;
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * V4L2 Subdev Operations
> + */
> +static int seninf_s_stream(struct v4l2_subdev *sd, unsigned int source_pad,
> + int on)
> +{
> + struct mtk_seninf *priv = sd_to_mtk_seninf(sd);
> + struct v4l2_subdev_state *state;
> + struct mtk_seninf_input *input;
> + struct mtk_seninf_mux *mux;
> + struct v4l2_subdev *source;
> + u32 sink_pad;
> + int ret;
> +
> + /* Stream control can only operate on source pads. */
> + if (source_pad < priv->conf->nb_inputs ||
> + source_pad >= priv->conf->nb_inputs + priv->conf->nb_outputs)
> + return -EINVAL;
> +
> + /*
> + * Locate the SENINF input and MUX for the source pad.
> + *
> + * Hardcode a 1:1 mapping of MUX instances to SENINF
> + * outputs to match the TOP_CAM_MUX configuration in
> + * mtk_seninf_top_mux_setup().
> + */
> + state = v4l2_subdev_lock_and_get_active_state(&priv->subdev);
> + if (!state)
> + return -EPIPE;
> +
> + ret = v4l2_subdev_routing_find_opposite_end(&state->routing, source_pad, 0, &sink_pad,
> + NULL);
> + if (ret) {
> + dev_dbg(priv->dev, "No sink pad routed to source pad %u\n", source_pad);
> + goto unlock;
> + }
> +
> + input = &priv->inputs[sink_pad];
> + mux = &priv->muxes[source_pad - priv->conf->nb_inputs];
> +
> + if (!on) {
> + if (!priv->is_testmode) {
> + source = input->source_sd;
> + ret = v4l2_subdev_call(source, video, s_stream, 0);
> + if (ret)
> + dev_err(priv->dev,
> + "failed to stop source %s: %d\n",
> + source->entity.name, ret);
> + }
> +
> + mtk_seninf_stop(priv, input);
> + pm_runtime_put(priv->dev);
> + goto unlock;
> + }
> +
> + ret = pm_runtime_get_sync(priv->dev);
> + if (ret < 0) {
> + dev_err(priv->dev, "Failed to pm_runtime_get_sync: %d\n", ret);
> + pm_runtime_put_noidle(priv->dev);
> + goto unlock;
> + }
> +
> + /* If test mode is enabled, just enable the test pattern generator. */
> + if (priv->is_testmode) {
> + seninf_enable_test_pattern(priv, state);
> + ret = 0;
> + goto unlock;
> + }
> +
> + /* Start the SENINF first and then the source. */
> + mtk_seninf_start(priv, state, input, mux);
> +
> + source = input->source_sd;
> + ret = v4l2_subdev_call(source, video, s_stream, 1);
> + if (ret) {
> + dev_err(priv->dev, "failed to start source %s: %d\n",
> + source->entity.name, ret);
> + mtk_seninf_stop(priv, input);
> + pm_runtime_put(priv->dev);
> + }
> +
> +unlock:
> + v4l2_subdev_unlock_state(state);
> + return ret;
> +};
> +
> +static int seninf_enable_streams(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state, u32 pad,
> + u64 streams_mask)
> +{
> + return seninf_s_stream(sd, pad, 1);
> +}
> +
> +static int seninf_disable_streams(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state, u32 pad,
> + u64 streams_mask)
> +{
> + return seninf_s_stream(sd, pad, 0);
> +}
> +
> +static const struct v4l2_mbus_framefmt mtk_seninf_default_fmt = {
> + .code = SENINF_DEFAULT_BUS_FMT,
> + .width = SENINF_DEFAULT_WIDTH,
> + .height = SENINF_DEFAULT_HEIGHT,
> + .field = V4L2_FIELD_NONE,
> + .colorspace = V4L2_COLORSPACE_SRGB,
> + .xfer_func = V4L2_XFER_FUNC_DEFAULT,
> + .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT,
> + .quantization = V4L2_QUANTIZATION_DEFAULT,
> +};
> +
> +static int __seninf_set_routing(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + struct v4l2_subdev_krouting *routing)
> +{
> + int ret;
> +
> + ret = v4l2_subdev_routing_validate(sd, routing, V4L2_SUBDEV_ROUTING_ONLY_1_TO_1);
> + if (ret)
> + return ret;
> +
> + ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing,
> + &mtk_seninf_default_fmt);
return ...;
> +
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int seninf_init_cfg(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state)
> +{
> + struct mtk_seninf *priv = sd_to_mtk_seninf(sd);
> + struct v4l2_subdev_route routes[SENINF_MAX_NUM_OUTPUTS] = { };
> + struct v4l2_subdev_krouting routing = {
> + .routes = routes,
> + };
> + unsigned int i;
> +
> + /*
> + * Initialize one route for supported source pads.
> + * It is a single route from the first sink pad to the source pad,
> + * while on SENINF 5.0 the routing table will map sink pads to source
> + * pads connected to CAMSV 1:1 (skipping the first two source pads
> + * connected to the CAM instances).
> + */
> + routing.num_routes = priv->conf->nb_outputs;
You can do this assignment in the declaration.
> +
> + for (i = 0; i < routing.num_routes; i++) {
> + struct v4l2_subdev_route *route = &routes[i];
> +
> + route->sink_pad = i;
> + route->sink_stream = 0;
> + route->source_pad = priv->conf->nb_inputs + i;
> + route->source_stream = 0;
> + route->flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE;
> + }
> +
> + return __seninf_set_routing(sd, state, &routing);
> +}
> +
> +static int seninf_enum_mbus_code(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + struct v4l2_subdev_mbus_code_enum *code)
> +{
> + const struct mtk_seninf_format_info *fmtinfo;
> + struct mtk_seninf *priv = sd_to_mtk_seninf(sd);
> +
> + if (code->index >= ARRAY_SIZE(mtk_seninf_formats))
> + return -EINVAL;
> +
> + fmtinfo = &mtk_seninf_formats[code->index];
> + if (fmtinfo->flags & MTK_SENINF_FORMAT_INPUT_ONLY &&
> + mtk_seninf_pad_is_source(priv, code->pad))
> + return -EINVAL;
> +
> + code->code = fmtinfo->code;
> +
> + return 0;
> +}
> +
> +static int seninf_set_fmt(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + struct v4l2_subdev_format *fmt)
> +{
> + struct mtk_seninf *priv = sd_to_mtk_seninf(sd);
> + const struct mtk_seninf_format_info *fmtinfo;
> + struct v4l2_mbus_framefmt *format;
> +
> + /*
> + * TODO (?): We should disallow setting formats on the source pad
> + * completely, as the SENINF can't perform any processing. This would
> + * however break usage of the test pattern generator, as there would be
> + * no way to configure formats at all when no active input is selected.
> + */
Could you instead expose the TPG as a new sub-device? We'll have internal
pads, too, in the future.
> +
> + /*
> + * Default to the first format if the requested media bus code isn't
> + * supported.
> + */
> + fmtinfo = mtk_seninf_format_info(fmt->format.code);
> + if (!fmtinfo) {
> + fmtinfo = &mtk_seninf_formats[0];
> + fmt->format.code = fmtinfo->code;
> + }
> +
> + /* Interlaced formats are not supported yet. */
> + fmt->format.field = V4L2_FIELD_NONE;
> +
> + /* Store the format. */
> + format = v4l2_subdev_state_get_stream_format(state, fmt->pad, fmt->stream);
> + if (!format)
> + return -EINVAL;
> +
> + *format = fmt->format;
> +
> + if (mtk_seninf_pad_is_source(priv, fmt->pad))
> + return 0;
> +
> + /* Propagate the format to the corresponding source pad. */
> + format = v4l2_subdev_state_get_opposite_stream_format(state, fmt->pad,
> + fmt->stream);
> + if (!format)
> + return -EINVAL;
> +
> + *format = fmt->format;
> +
> + return 0;
> +}
> +
> +static int seninf_set_routing(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + enum v4l2_subdev_format_whence which,
> + struct v4l2_subdev_krouting *routing)
> +{
> + return __seninf_set_routing(sd, state, routing);
> +}
> +
> +static const struct v4l2_subdev_core_ops seninf_subdev_core_ops = {
> + .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
> + .unsubscribe_event = v4l2_event_subdev_unsubscribe,
> +};
> +
> +static const struct v4l2_subdev_pad_ops seninf_subdev_pad_ops = {
> + .init_cfg = seninf_init_cfg,
> + .enum_mbus_code = seninf_enum_mbus_code,
> + .get_fmt = v4l2_subdev_get_fmt,
> + .set_fmt = seninf_set_fmt,
> + .link_validate = v4l2_subdev_link_validate_default,
> + .set_routing = seninf_set_routing,
> + .enable_streams = seninf_enable_streams,
> + .disable_streams = seninf_disable_streams,
> +};
> +
> +static const struct v4l2_subdev_ops seninf_subdev_ops = {
> + .core = &seninf_subdev_core_ops,
> + .pad = &seninf_subdev_pad_ops,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Media Entity Operations
> + */
> +
> +static const struct media_entity_operations seninf_media_ops = {
> + .get_fwnode_pad = v4l2_subdev_get_fwnode_pad_1_to_1,
> + .link_validate = v4l2_subdev_link_validate,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Async Subdev Notifier
> + */
> +
> +struct mtk_seninf_async_subdev {
> + struct v4l2_async_connection asc;
> + struct mtk_seninf_input *input;
> + unsigned int port;
> +};
> +
> +static int mtk_seninf_fwnode_parse(struct device *dev,
> + unsigned int id)
A better name for "id" would be "port".
> +
> +{
> + static const char * const phy_names[] = { "csi0", "csi1", "csi2", "csi0b"};
> + struct mtk_seninf *priv = dev_get_drvdata(dev);
> + struct fwnode_handle *ep, *fwnode;
> + struct mtk_seninf_input *input;
> + struct mtk_seninf_async_subdev *asd;
> + struct v4l2_fwnode_endpoint vep = {
> + .bus_type = V4L2_MBUS_CSI2_DPHY,
> + };
Fits on a single line.
> + unsigned int port;
> + int ret;
> +
> + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), id, 0, 0);
> + if (!ep)
> + return 0;
> +
> + fwnode = fwnode_graph_get_remote_endpoint(ep);
> + ret = v4l2_fwnode_endpoint_parse(ep, &vep);
> + if (ret) {
> + dev_err(dev, "Failed to parse %pOF\n", to_of_node(fwnode));
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + asd = v4l2_async_nf_add_fwnode(&priv->notifier, fwnode,
> + struct mtk_seninf_async_subdev);
> + if (IS_ERR(asd)) {
> + ret = PTR_ERR(asd);
> + goto out;
> + }
> +
> + port = vep.base.port;
> + asd->port = port;
> +
> + if (mtk_seninf_pad_is_source(priv, port)) {
> + ret = 0;
> + goto out;
> + }
> +
> + if (vep.bus_type != V4L2_MBUS_CSI2_DPHY) {
As you requested D-PHY, there's no longer need to check it here.
(v4l2_fwnode_endpoint_parse() returns an error otherwise.)
> + dev_err(dev, "Only CSI2 bus type is currently supported\n");
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + input = &priv->inputs[port];
> +
> + input->pad = port;
> + input->seninf_id = port_to_seninf_id[port];
> + input->base = priv->base + 0x1000 * input->seninf_id;
> + input->seninf = priv;
> +
> + input->bus = vep.bus.mipi_csi2;
> +
> + input->phy = devm_phy_get(dev, phy_names[port]);
> + if (IS_ERR(input->phy)) {
> + dev_err(dev, "failed to get phy:%ld\n", PTR_ERR(input->phy));
> + ret = PTR_ERR(input->phy);
> + goto out;
> + }
> + input->phy_mode = SENINF_PHY_MODE_4D1C;
> +
> + asd->input = input;
> +
> + ret = 0;
> +out:
> + fwnode_handle_put(ep);
> + fwnode_handle_put(fwnode);
> + return ret;
> +}
> +
> +static int mtk_seninf_notifier_bound(struct v4l2_async_notifier *notifier,
> + struct v4l2_subdev *sd,
> + struct v4l2_async_connection *asc)
> +{
> + struct mtk_seninf *priv = container_of(notifier, struct mtk_seninf, notifier);
> + struct mtk_seninf_async_subdev *asd =
> + container_of(asc, struct mtk_seninf_async_subdev, asc);
> + struct device_link *link;
> + int ret;
> +
> + dev_dbg(priv->dev, "%s bound to SENINF port %u\n", sd->entity.name, asd->port);
> +
> + if (mtk_seninf_pad_is_sink(priv, asd->port)) {
> + struct mtk_seninf_input *input = asd->input;
> +
> + input->source_sd = sd;
> +
> + link = device_link_add(priv->dev, sd->dev,
> + DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
Could you explain a little why do you need a device link here? Same below
actually.
> + if (!link) {
> + dev_err(priv->dev,
> + "Failed to create device link from source %s\n", sd->name);
> + return -EINVAL;
> + }
> +
> + ret = v4l2_create_fwnode_links_to_pad(sd, &priv->pads[input->pad],
> + MEDIA_LNK_FL_IMMUTABLE |
> + MEDIA_LNK_FL_ENABLED);
> + } else {
> + link = device_link_add(sd->dev, priv->dev,
> + DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
> + if (!link) {
> + dev_err(priv->dev,
> + "Failed to create device link to output %s\n", sd->name);
> + return -EINVAL;
> + }
> +
> + ret = v4l2_create_fwnode_links_to_pad(&priv->subdev,
> + &sd->entity.pads[0],
> + MEDIA_LNK_FL_IMMUTABLE |
> + MEDIA_LNK_FL_ENABLED);
> + }
> + if (ret) {
> + dev_err(priv->dev, "Failed to create links between SENINF port %u and %s (%d)\n",
> + asd->port, sd->entity.name, ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int mtk_seninf_notifier_complete(struct v4l2_async_notifier *notifier)
> +{
> + struct mtk_seninf *priv = container_of(notifier, struct mtk_seninf, notifier);
> + int ret;
> +
> + ret = v4l2_device_register_subdev_nodes(&priv->v4l2_dev);
> + if (ret) {
> + dev_err(priv->dev, "Failed to register subdev nodes: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct v4l2_async_notifier_operations mtk_seninf_async_ops = {
> + .bound = mtk_seninf_notifier_bound,
> + .complete = mtk_seninf_notifier_complete,
> +};
> +
> +static int mtk_seninf_media_init(struct mtk_seninf *priv)
> +{
> + struct media_device *media_dev = &priv->media_dev;
> + const struct mtk_seninf_conf *conf = priv->conf;
> + u8 num_pads = conf->nb_outputs + conf->nb_inputs;
unsigned int?
> + struct media_pad *pads = priv->pads;
> + struct device *dev = priv->dev;
> + unsigned int i;
> + int ret;
> +
> + media_dev->dev = dev;
> + strscpy(media_dev->model, conf->model, sizeof(media_dev->model));
> + snprintf(media_dev->bus_info, sizeof(media_dev->bus_info),
> + "platform:%s", dev_name(dev));
media_device_init() already does this.
> + media_dev->hw_revision = 0;
> + media_device_init(media_dev);
> +
> + for (i = 0; i < conf->nb_inputs; i++)
> + pads[i].flags = MEDIA_PAD_FL_SINK;
> + for (i = conf->nb_inputs; i < num_pads; i++)
> + pads[i].flags = MEDIA_PAD_FL_SOURCE;
> +
> + ret = media_entity_pads_init(&priv->subdev.entity, num_pads, pads);
> + if (ret) {
> + media_device_cleanup(media_dev);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int mtk_seninf_v4l2_async_register(struct mtk_seninf *priv)
> +{
> + const struct mtk_seninf_conf *conf = priv->conf;
> + struct device *dev = priv->dev;
> + unsigned int i;
> + int ret;
> +
> + v4l2_async_nf_init(&priv->notifier, &priv->v4l2_dev);
> +
> + for (i = 0; i < conf->nb_inputs + conf->nb_outputs; ++i) {
> + ret = mtk_seninf_fwnode_parse(dev, i);
> +
> + if (ret) {
> + dev_err(dev, "Failed to parse endpoint at port %d, err: %d\n", i, ret);
> + goto err_clean_notififer;
> + }
> + }
> +
> + priv->notifier.ops = &mtk_seninf_async_ops;
> + ret = v4l2_async_nf_register(&priv->notifier);
> + if (ret) {
> + dev_err(dev, "Failed to register async notifier: %d\n", ret);
> + goto err_clean_notififer;
> + }
> + return 0;
> +
> +err_clean_notififer:
> + v4l2_async_nf_cleanup(&priv->notifier);
> +
> + return ret;
> +}
> +
> +static int mtk_seninf_v4l2_register(struct mtk_seninf *priv)
> +{
> + struct v4l2_subdev *sd = &priv->subdev;
> + struct device *dev = priv->dev;
> + int ret;
> +
> + /* Initialize media device & pads. */
> + ret = mtk_seninf_media_init(priv);
> + if (ret)
> + return ret;
> +
> + /* Initialize & register v4l2 device. */
> + priv->v4l2_dev.mdev = &priv->media_dev;
> +
> + ret = v4l2_device_register(dev, &priv->v4l2_dev);
> + if (ret) {
> + dev_err_probe(dev, ret, "Failed to register V4L2 device: %d\n", ret);
> + goto err_clean_media;
> + }
> +
> + /* Initialize & register subdev. */
> + v4l2_subdev_init(sd, &seninf_subdev_ops);
> + sd->dev = dev;
> + sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
> + sd->entity.ops = &seninf_media_ops;
> + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS
> + | V4L2_SUBDEV_FL_STREAMS;
Alignment. '|' should also be on the previous line, i.e. wrap after it.
The same applies to the rest of the set, too.
> + strscpy(sd->name, dev_name(dev), sizeof(sd->name));
> + ret = seninf_initialize_controls(priv);
> + if (ret) {
> + dev_err_probe(dev, ret, "Failed to initialize controls: %d\n", ret);
> + goto err_unreg_v4l2;
> + }
> + v4l2_set_subdevdata(sd, priv);
> +
> + ret = v4l2_subdev_init_finalize(sd);
> + if (ret)
> + goto err_free_handler;
> +
> + ret = v4l2_device_register_subdev(&priv->v4l2_dev, sd);
> + if (ret) {
> + dev_err_probe(dev, ret, "Failed to register subdev: %d\n", ret);
> + goto err_cleanup_subdev;
> + }
> +
> + /* Set up async device */
> + ret = mtk_seninf_v4l2_async_register(priv);
> + if (ret) {
> + dev_err_probe(dev, ret, "Failed to register v4l2 async notifier: %d\n", ret);
> + goto err_unreg_subdev;
> + }
> +
> + /* Register media device */
> + ret = media_device_register(&priv->media_dev);
> + if (ret) {
> + dev_err_probe(dev, ret, "failed to register media device: %d\n", ret);
> + goto err_unreg_notifier;
> + }
> +
> + return 0;
> +
> +err_unreg_notifier:
> + v4l2_async_nf_unregister(&priv->notifier);
> +err_unreg_subdev:
> + v4l2_device_unregister_subdev(sd);
> +err_cleanup_subdev:
> + v4l2_subdev_cleanup(sd);
> +err_free_handler:
> + v4l2_ctrl_handler_free(&priv->ctrl_handler);
> +err_unreg_v4l2:
> + v4l2_device_unregister(&priv->v4l2_dev);
> +err_clean_media:
> + media_entity_cleanup(&sd->entity);
> + media_device_cleanup(&priv->media_dev);
> +
> + return ret;
> +}
> +
> +static int seninf_probe(struct platform_device *pdev)
> +{
> + /* List of clocks required by seninf. */
I think this comment is redundant.
> + static const char * const clk_names[] = { "camsys", "top_mux" };
> + struct device *dev = &pdev->dev;
> + struct mtk_seninf *priv;
> + unsigned int i;
> + int ret;
> +
> + priv = devm_kzalloc(dev, sizeof(struct mtk_seninf), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->conf = of_device_get_match_data(dev);
> +
> + dev_set_drvdata(dev, priv);
> + priv->dev = dev;
> +
> + priv->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(priv->base))
> + return PTR_ERR(priv->base);
> +
> + priv->num_clks = ARRAY_SIZE(clk_names);
> + priv->clks = devm_kcalloc(dev, priv->num_clks,
> + sizeof(*priv->clks), GFP_KERNEL);
> + if (!priv->clks)
> + return -ENOMEM;
> +
> + for (i = 0; i < priv->num_clks; ++i)
> + priv->clks[i].id = clk_names[i];
> +
> + ret = devm_clk_bulk_get(dev, priv->num_clks, priv->clks);
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to get seninf clock:%d\n", ret);
> +
> + for (i = 0; i < priv->conf->nb_muxes; ++i) {
> + struct mtk_seninf_mux *mux = &priv->muxes[i];
> +
> + mux->pad = priv->conf->nb_inputs + i;
> + mux->mux_id = i;
> + mux->base = priv->base + 0x1000 * i;
> + mux->seninf = priv;
> + }
> +
> + ret = mtk_seninf_v4l2_register(priv);
> + if (ret)
> + return ret;
> +
> + devm_pm_runtime_enable(dev);
> +
> + return ret;
> +}
> +
> +static int seninf_pm_suspend(struct device *dev)
> +{
> + struct mtk_seninf *priv = dev_get_drvdata(dev);
> +
> + dev_dbg(dev, "seninf runtime suspend\n");
Maybe this could be removed?
> + clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
> +
> + return 0;
> +}
> +
> +static int seninf_pm_resume(struct device *dev)
> +{
> + struct mtk_seninf *priv = dev_get_drvdata(dev);
> + int ret;
> +
> + dev_dbg(dev, "seninf runtime resume\n");
This, too.
> + ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
> + if (ret) {
> + dev_err(dev, "failed to enable clock:%d\n", ret);
> + return ret;
> + }
> +
> + mtk_seninf_csi2_setup_phy(priv);
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops runtime_pm_ops = {
> + SET_RUNTIME_PM_OPS(seninf_pm_suspend, seninf_pm_resume, NULL)
> + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
> +};
> +
> +static int seninf_remove(struct platform_device *pdev)
> +{
> + struct mtk_seninf *priv = dev_get_drvdata(&pdev->dev);
> +
> + media_device_unregister(&priv->media_dev);
> + media_device_cleanup(&priv->media_dev);
> + v4l2_async_nf_unregister(&priv->notifier);
> + v4l2_async_nf_cleanup(&priv->notifier);
> + v4l2_device_unregister_subdev(&priv->subdev);
> + v4l2_subdev_cleanup(&priv->subdev);
> + v4l2_ctrl_handler_free(&priv->ctrl_handler);
> + media_entity_cleanup(&priv->subdev.entity);
> + v4l2_device_unregister(&priv->v4l2_dev);
> +
> + return 0;
> +}
> +
> +static const struct mtk_seninf_conf seninf_8365_conf = {
> + .model = "mtk-camsys-3.0",
> + .nb_inputs = 4,
> + .nb_muxes = 6,
> + .nb_outputs = 4,
> +};
> +
> +static const struct of_device_id mtk_seninf_of_match[] = {
> + { .compatible = "mediatek,mt8365-seninf", .data = &seninf_8365_conf },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, mtk_seninf_of_match);
> +
> +static struct platform_driver seninf_pdrv = {
> + .driver = {
> + .name = "mtk-seninf",
> + .pm = &runtime_pm_ops,
> + .of_match_table = mtk_seninf_of_match,
> + },
> + .probe = seninf_probe,
> + .remove = seninf_remove,
> +};
> +
> +module_platform_driver(seninf_pdrv);
> +
> +MODULE_DESCRIPTION("MTK sensor interface driver");
> +MODULE_AUTHOR("Louis Kuo <louis.kuo@mediatek.com>");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h
> new file mode 100644
> index 000000000000..768ad5d641be
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h
> @@ -0,0 +1,112 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2022 MediaTek Inc.
> + */
> +
> +#ifndef __SENINF_REG_H__
> +#define __SENINF_REG_H__
> +
> +#include <linux/bits.h>
> +
> +#define SENINF_TOP_CTRL 0x0000
> +#define SENINF_TOP_CTRL_MUX_LP_MODE BIT(31)
> +#define SENINF_TOP_CTRL_SENINF_PCLK_EN BIT(10)
> +#define SENINF_TOP_CTRL_SENINF2_PCLK_EN BIT(11)
> +#define SENINF_TOP_MUX_CTRL 0x0008
> +#define SENINF_TOP_CAM_MUX_CTRL 0x0010
> +#define SENINF_TOP_PHY_SENINF_CTL_CSI0 0x001c
> +#define SENINF_TOP_PHY_SENINF_CTL_CSI0_DPHY_MODE BIT(0)
> +#define SENINF_TOP_PHY_SENINF_CTL_CSI0_CK_SEL_1 GENMASK(10, 8)
> +#define SENINF_TOP_PHY_SENINF_CTL_CSI0_CK_SEL_2 GENMASK(13, 12)
> +#define SENINF_TOP_PHY_SENINF_CTL_CSI0_PHY_SENINF_LANE_MUX_CSI0_EN BIT(31)
> +#define SENINF_TOP_PHY_SENINF_CTL_CSI1 0x0020
> +#define SENINF_TOP_PHY_SENINF_CTL_CSI1_DPHY_MODE BIT(0)
> +#define SENINF_TOP_PHY_SENINF_CTL_CSI1_CK_SEL_1 GENMASK(10, 8)
> +#define SENINF_TOP_PHY_SENINF_CTL_CSI1_PHY_SENINF_LANE_MUX_CSI1_EN BIT(31)
> +#define SENINF_CTRL 0x0200
> +#define SENINF_CTRL_SENINF_EN BIT(0)
> +#define SENINF_CTRL_CSI2_SW_RST BIT(7)
> +#define SENINF_CTRL_SENINF_SRC_SEL GENMASK(14, 12)
> +#define SENINF_CTRL_PAD2CAM_DATA_SEL GENMASK(30, 28)
> +#define SENINF_CTRL_EXT 0x0204
> +#define SENINF_CTRL_EXT_SENINF_TESTMDL_IP_EN BIT(1)
> +#define SENINF_CTRL_EXT_SENINF_NCSI2_IP_EN BIT(5)
> +#define SENINF_CTRL_EXT_SENINF_CSI2_IP_EN BIT(6)
> +#define SENINF_TG1_PH_CNT 0x0600
> +#define SENINF_TG1_SEN_CK 0x0604
> +#define SENINF_TG1_TM_CTL 0x0608
> +#define SENINF_TG1_TM_CTL_TM_EN BIT(0)
> +#define SENINF_TG1_TM_CTL_TM_FMT BIT(2)
> +#define SENINF_TG1_TM_CTL_TM_PAT GENMASK(7, 4)
> +#define SENINF_TG1_TM_CTL_TM_VSYNC GENMASK(15, 8)
> +#define SENINF_TG1_TM_CTL_TM_DUMMYPXL GENMASK(23, 16)
> +#define SENINF_TG1_TM_SIZE 0x060c
> +#define SENINF_TG1_TM_SIZE_TM_LINE GENMASK(29, 16)
> +#define SENINF_TG1_TM_SIZE_TM_PXL GENMASK(12, 0)
> +#define SENINF_TG1_TM_CLK 0x0610
> +#define TEST_MODEL_CLK_DIVIDED_CNT 8
> +#define SENINF_TG1_TM_STP 0x0614
> +#define TIME_STAMP_DIVIDER 1
> +#define MIPI_RX_CON24_CSI0 0x0824
> +#define MIPI_RX_CON24_CSI0_CSI0_BIST_LN0_MUX GENMASK(25, 24)
> +#define MIPI_RX_CON24_CSI0_CSI0_BIST_LN1_MUX GENMASK(27, 26)
> +#define MIPI_RX_CON24_CSI0_CSI0_BIST_LN2_MUX GENMASK(29, 28)
> +#define MIPI_RX_CON24_CSI0_CSI0_BIST_LN3_MUX GENMASK(31, 30)
> +#define SENINF_CSI2_CTL 0x0a00
> +#define SENINF_CSI2_CTL_DATA_LANE0_EN BIT(0)
> +#define SENINF_CSI2_CTL_DATA_LANE1_EN BIT(1)
> +#define SENINF_CSI2_CTL_DATA_LANE2_EN BIT(2)
> +#define SENINF_CSI2_CTL_DATA_LANE3_EN BIT(3)
> +#define SENINF_CSI2_CTL_CLOCK_LANE_EN BIT(4)
> +#define SENINF_CSI2_CTL_HSRX_DET_EN BIT(7)
> +#define SENINF_CSI2_CTL_ED_SEL BIT(16)
> +#define DATA_HEADER_ORDER_DI_WCL_WCH 1
> +#define SENINF_CSI2_CTL_HS_TRAIL_EN BIT(25)
> +#define SENINF_CSI2_CTL_CLOCK_HS_OPTION BIT(27)
> +#define SENINF_CSI2_LNRD_TIMING 0x0a08
> +#define SENINF_CSI2_LNRD_TIMING_DATA_SETTLE_PARAMETER GENMASK(15, 8)
> +#define SENINF_CSI2_DPCM 0x0a0c
> +#define SENINF_CSI2_DPCM_DI_30_DPCM_EN BIT(7)
> +#define SENINF_CSI2_DPCM_DI_2A_DPCM_EN BIT(15)
> +#define SENINF_CSI2_INT_EN 0x0a10
> +#define SENINF_CSI2_INT_STATUS 0x0a14
> +#define SENINF_CSI2_DGB_SEL 0x0a18
> +#define SENINF_CSI2_DGB_SEL_DEBUG_SEL GENMASK(7, 0)
> +#define SENINF_CSI2_DGB_SEL_DEBUG_EN BIT(31)
> +#define SENINF_CSI2_SPARE0 0x0a20
> +#define SENINF_CSI2_LNRC_FSM 0x0a28
> +#define SENINF_CSI2_HS_TRAIL 0x0a40
> +#define SENINF_CSI2_HS_TRAIL_HS_TRAIL_PARAMETER GENMASK(7, 0)
> +#define SENINF_CSI2_RESYNC_MERGE_CTL 0x0a74
> +#define SENINF_CSI2_RESYNC_MERGE_CTL_CPHY_LANE_RESYNC_CNT GENMASK(2, 0)
> +#define SENINF_CSI2_RESYNC_MERGE_CTL_BYPASS_LANE_RESYNC BIT(10)
> +#define SENINF_CSI2_RESYNC_MERGE_CTL_CDPHY_SEL BIT(11)
> +#define SENINF_CSI2_MODE 0x0ae8
> +#define SENINF_CSI2_MODE_CSR_CSI2_MODE GENMASK(7, 0)
> +#define SENINF_CSI2_MODE_CSR_CSI2_HEADER_LEN GENMASK(10, 8)
> +#define SENINF_CSI2_DPHY_SYNC 0x0b20
> +#define SENINF_CSI2_DPHY_SYNC_SYNC_SEQ_MASK_0 GENMASK(15, 0)
> +#define SENINF_CSI2_DPHY_SYNC_SYNC_SEQ_PAT_0 GENMASK(31, 16)
> +#define SENINF_MUX_CTRL 0x0d00
> +#define SENINF_MUX_CTRL_SENINF_MUX_SW_RST BIT(0)
> +#define SENINF_MUX_CTRL_SENINF_IRQ_SW_RST BIT(1)
> +#define SENINF_MUX_CTRL_SENINF_HSYNC_MASK BIT(7)
> +#define SENINF_MUX_CTRL_SENINF_PIX_SEL BIT(8)
> +#define SENINF_MUX_CTRL_SENINF_VSYNC_POL BIT(9)
> +#define SENINF_MUX_CTRL_SENINF_HSYNC_POL BIT(10)
> +#define SENINF_MUX_CTRL_SENINF_SRC_SEL GENMASK(15, 12)
> +#define SENINF_MUX_CTRL_FIFO_PUSH_EN GENMASK(21, 16)
> +#define FIFO_PUSH_EN_NORMAL_MODE 0x1f
> +#define FIFO_PUSH_EN_JPEG_2_PIXEL_MODE 0x1e
> +#define SENINF_MUX_CTRL_FIFO_FLUSH_EN GENMASK(28, 22)
> +#define FIFO_FLUSH_EN_NORMAL_MODE 0x1b
> +#define FIFO_FLUSH_EN_JPEG_2_PIXEL_MODE 0x18
> +#define SENINF_MUX_CTRL_FIFO_FULL_WR_EN GENMASK(29, 28)
> +#define SENINF_MUX_CTRL_SENINF_MUX_EN BIT(31)
> +#define SENINF_MUX_INTEN 0x0d04
> +#define SENINF_MUX_SPARE 0x0d2c
> +#define SENINF_MUX_CTRL_EXT 0x0d3c
> +#define SENINF_MUX_CTRL_EXT_SENINF_SRC_SEL_EXT GENMASK(1, 0)
> +#define SENINF_MUX_CTRL_EXT_SENINF_PIX_SEL_EXT BIT(4)
> +
> +#endif /* __SENINF_REG_H__ */
--
Kind regards,
Sakari Ailus
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv
2024-01-10 14:14 ` [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv Julien Stephan
` (3 preceding siblings ...)
2024-01-12 3:55 ` CK Hu (胡俊光)
@ 2024-02-15 11:55 ` Sakari Ailus
2024-03-18 3:50 ` CK Hu (胡俊光)
` (4 subsequent siblings)
9 siblings, 0 replies; 28+ messages in thread
From: Sakari Ailus @ 2024-02-15 11:55 UTC (permalink / raw)
To: Julien Stephan
Cc: Phi-bang Nguyen, Florian Sylvestre, Paul Elder, Laurent Pinchart,
Andy Hsieh, AngeloGioacchino Del Regno, Conor Dooley, devicetree,
Krzysztof Kozlowski, linux-arm-kernel, linux-kernel,
linux-mediatek, linux-media, Louis Kuo, Matthias Brugger,
Mauro Carvalho Chehab, Rob Herring
Hi Julien,
On Wed, Jan 10, 2024 at 03:14:41PM +0100, Julien Stephan wrote:
> From: Phi-bang Nguyen <pnguyen@baylibre.com>
>
> This driver provides a path to bypass the SoC ISP so that image data
> coming from the SENINF can go directly into memory without any image
> processing. This allows the use of an external ISP.
>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
> [Paul Elder fix irq locking]
> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
> Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
> MAINTAINERS | 1 +
> .../platform/mediatek/isp/isp_30/Kconfig | 19 +
> .../platform/mediatek/isp/isp_30/Makefile | 1 +
> .../mediatek/isp/isp_30/camsv/Makefile | 7 +
> .../mediatek/isp/isp_30/camsv/mtk_camsv.c | 328 ++++++++
> .../mediatek/isp/isp_30/camsv/mtk_camsv.h | 199 +++++
> .../isp/isp_30/camsv/mtk_camsv30_hw.c | 427 ++++++++++
> .../isp/isp_30/camsv/mtk_camsv30_regs.h | 60 ++
> .../isp/isp_30/camsv/mtk_camsv_video.c | 774 ++++++++++++++++++
> 9 files changed, 1816 insertions(+)
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/Makefile
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.c
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.h
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_hw.c
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_regs.h
> create mode 100644 drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv_video.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 52d200d5e36c..ffe4d3ae62e5 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13618,6 +13618,7 @@ M: Andy Hsieh <andy.hsieh@mediatek.com>
> S: Supported
> F: Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
> F: Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
> +F: drivers/media/platform/mediatek/isp/isp_30/camsv/*
> F: drivers/media/platform/mediatek/isp/isp_30/seninf/*
>
> MEDIATEK SMI DRIVER
> diff --git a/drivers/media/platform/mediatek/isp/isp_30/Kconfig b/drivers/media/platform/mediatek/isp/isp_30/Kconfig
> index 9791312589fb..5293a061ae0b 100644
> --- a/drivers/media/platform/mediatek/isp/isp_30/Kconfig
> +++ b/drivers/media/platform/mediatek/isp/isp_30/Kconfig
> @@ -14,3 +14,22 @@ config MTK_SENINF30
>
> To compile this driver as a module, choose M here: the
> module will be called mtk-seninf.
> +
> +config MTK_CAMSV30
> + tristate "MediaTek ISP3.0 CAMSV driver"
> + depends on VIDEO_V4L2_SUBDEV_API
> + depends on ARCH_MEDIATEK || COMPILE_TEST
> + depends on OF
> + depends on PM
> + select VIDEOBUF2_VMALLOC
> + select VIDEOBUF2_DMA_CONTIG
> + select MTK_SENINF30
> + select PHY_MTK_MIPI_CSI_0_5
> + default n
> + help
> + This driver provides a path to bypass the SoC ISP so that
> + image data come from the SENINF can go directly into memory
> + without any image processing.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called mtk-camsv30.
> diff --git a/drivers/media/platform/mediatek/isp/isp_30/Makefile b/drivers/media/platform/mediatek/isp/isp_30/Makefile
> index ac3142de4739..a76f440c5358 100644
> --- a/drivers/media/platform/mediatek/isp/isp_30/Makefile
> +++ b/drivers/media/platform/mediatek/isp/isp_30/Makefile
> @@ -1,3 +1,4 @@
> # SPDX-License-Identifier: GPL-2.0
>
> obj-$(CONFIG_MTK_SENINF30) += seninf/
> +obj-$(CONFIG_MTK_CAMSV30) += camsv/
> diff --git a/drivers/media/platform/mediatek/isp/isp_30/camsv/Makefile b/drivers/media/platform/mediatek/isp/isp_30/camsv/Makefile
> new file mode 100644
> index 000000000000..fffbc6e7cb78
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/isp_30/camsv/Makefile
> @@ -0,0 +1,7 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +mtk-camsv30-objs += mtk_camsv.o
> +mtk-camsv30-objs += mtk_camsv30_hw.o
> +mtk-camsv30-objs += mtk_camsv_video.o
> +
> +obj-$(CONFIG_MTK_CAMSV30) += mtk-camsv30.o
> diff --git a/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.c b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.c
> new file mode 100644
> index 000000000000..37ee07d503b9
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.c
> @@ -0,0 +1,328 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2020 BayLibre
> + * Copyright (c) 2022 MediaTek Inc.
> + */
> +
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-device.h>
> +
> +#include "mtk_camsv.h"
> +
> +static inline struct mtk_cam_dev *to_mtk_cam_dev(struct v4l2_subdev *sd)
> +{
> + return container_of(sd, struct mtk_cam_dev, subdev);
> +}
> +
> +static const u32 mtk_cam_mbus_formats[] = {
> + MEDIA_BUS_FMT_SBGGR8_1X8,
> + MEDIA_BUS_FMT_SGBRG8_1X8,
> + MEDIA_BUS_FMT_SGRBG8_1X8,
> + MEDIA_BUS_FMT_SRGGB8_1X8,
> + MEDIA_BUS_FMT_SBGGR10_1X10,
> + MEDIA_BUS_FMT_SGBRG10_1X10,
> + MEDIA_BUS_FMT_SGRBG10_1X10,
> + MEDIA_BUS_FMT_SRGGB10_1X10,
> + MEDIA_BUS_FMT_SBGGR12_1X12,
> + MEDIA_BUS_FMT_SGBRG12_1X12,
> + MEDIA_BUS_FMT_SGRBG12_1X12,
> + MEDIA_BUS_FMT_SRGGB12_1X12,
> + MEDIA_BUS_FMT_UYVY8_1X16,
> + MEDIA_BUS_FMT_VYUY8_1X16,
> + MEDIA_BUS_FMT_YUYV8_1X16,
> + MEDIA_BUS_FMT_YVYU8_1X16,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * V4L2 Subdev Operations
> + */
> +
> +static int mtk_cam_cio_stream_on(struct mtk_cam_dev *cam)
> +{
> + struct device *dev = cam->dev;
> + struct v4l2_subdev *seninf;
> + int ret;
> +
> + if (!cam->seninf) {
> + cam->seninf = media_pad_remote_pad_first(&cam->subdev_pads[MTK_CAM_CIO_PAD_SENINF]);
> + if (!cam->seninf) {
> + dev_err(dev, "%s: No SENINF connected\n", __func__);
> + return -ENOLINK;
> + }
> + }
> +
> + seninf = media_entity_to_v4l2_subdev(cam->seninf->entity);
> +
> + /* Seninf must stream on first */
> + ret = v4l2_subdev_call(seninf, pad, enable_streams, NULL, cam->seninf->index, 0);
> + if (ret) {
> + dev_err(dev, "failed to stream on %s:%d\n",
> + seninf->entity.name, ret);
> + return ret;
> + }
> +
> + cam->streaming = true;
> +
> + return 0;
> +}
> +
> +static int mtk_cam_cio_stream_off(struct mtk_cam_dev *cam)
> +{
> + int ret;
> +
> + if (cam->seninf) {
> + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(cam->seninf->entity);
> +
> + ret = v4l2_subdev_call(sd, pad, disable_streams, NULL,
> + cam->seninf->index, 0);
> + if (ret) {
> + dev_err(cam->dev, "failed to stream off %s:%d\n",
> + sd->entity.name, ret);
> + return ret;
> + }
> + }
> +
> + cam->streaming = false;
> +
> + return 0;
> +}
> +
> +static int mtk_cam_sd_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> + struct mtk_cam_dev *cam = to_mtk_cam_dev(sd);
> +
> + if (enable) {
> + /* Align vb2_core_streamon design */
> + if (cam->streaming) {
> + dev_warn(cam->dev, "already streaming on\n");
> + return 0;
> + }
> + return mtk_cam_cio_stream_on(cam);
> + }
> +
> + if (!cam->streaming) {
> + dev_warn(cam->dev, "already streaming off\n");
> + return 0;
> + }
> +
> + return mtk_cam_cio_stream_off(cam);
> +}
> +
> +static struct v4l2_mbus_framefmt *
> +mtk_cam_get_pad_format(struct mtk_cam_dev *cam,
> + struct v4l2_subdev_state *sd_state,
> + unsigned int pad, u32 which)
> +{
> + switch (which) {
> + case V4L2_SUBDEV_FORMAT_TRY:
> + return v4l2_subdev_get_try_format(&cam->subdev, sd_state, pad);
> + case V4L2_SUBDEV_FORMAT_ACTIVE:
> + return &cam->formats[pad];
Please use v4l2_subdev_state_get_format() instead. Do not store the format
information in your own context struct.
> + default:
> + return NULL;
> + }
> +}
> +
> +static int mtk_cam_init_cfg(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *sd_state)
> +{
> + static const struct v4l2_mbus_framefmt def_format = {
> + .code = MEDIA_BUS_FMT_SGRBG10_1X10,
> + .width = IMG_DEF_WIDTH,
> + .height = IMG_DEF_HEIGHT,
> + .field = V4L2_FIELD_NONE,
> + .colorspace = V4L2_COLORSPACE_SRGB,
> + .xfer_func = V4L2_XFER_FUNC_DEFAULT,
> + .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT,
> + .quantization = V4L2_QUANTIZATION_DEFAULT,
> + };
> +
Extra newline.
> + struct mtk_cam_dev *cam = to_mtk_cam_dev(sd);
> + u32 which = sd_state ? V4L2_SUBDEV_FORMAT_TRY
> + : V4L2_SUBDEV_FORMAT_ACTIVE;
> + struct v4l2_mbus_framefmt *format;
> + unsigned int i;
> +
> + for (i = 0; i < sd->entity.num_pads; i++) {
> + format = mtk_cam_get_pad_format(cam, sd_state, i, which);
> + *format = def_format;
> + }
> +
> + return 0;
> +}
> +
> +static int mtk_cam_enum_mbus_code(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *sd_state,
> + struct v4l2_subdev_mbus_code_enum *code)
> +{
> + if (code->index >= ARRAY_SIZE(mtk_cam_mbus_formats))
> + return -EINVAL;
> +
> + code->code = mtk_cam_mbus_formats[code->index];
> +
> + return 0;
> +}
> +
> +static int mtk_cam_get_fmt(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *sd_state,
> + struct v4l2_subdev_format *fmt)
> +{
> + struct mtk_cam_dev *cam = to_mtk_cam_dev(sd);
> +
> + fmt->format = *mtk_cam_get_pad_format(cam, sd_state, fmt->pad,
> + fmt->which);
> +
> + return 0;
> +}
> +
> +static int mtk_cam_set_fmt(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *sd_state,
> + struct v4l2_subdev_format *fmt)
> +{
> + struct mtk_cam_dev *cam = to_mtk_cam_dev(sd);
> + struct v4l2_mbus_framefmt *format;
> + unsigned int i;
> +
> + /*
> + * We only support pass-through mode, the format on source pads can't
> + * be modified.
> + */
> + if (fmt->pad != MTK_CAM_CIO_PAD_SENINF)
> + return mtk_cam_get_fmt(sd, sd_state, fmt);
> +
> + for (i = 0; i < ARRAY_SIZE(mtk_cam_mbus_formats); ++i) {
> + if (mtk_cam_mbus_formats[i] == fmt->format.code)
> + break;
> + }
> +
> + if (i == ARRAY_SIZE(mtk_cam_mbus_formats))
> + fmt->format.code = mtk_cam_mbus_formats[0];
> +
> + format = mtk_cam_get_pad_format(cam, sd_state, fmt->pad, fmt->which);
> + format->width = fmt->format.width;
> + format->height = fmt->format.height;
> + format->code = fmt->format.code;
> +
> + fmt->format = *format;
> +
> + /* Propagate the format to the source pad. */
> + format = mtk_cam_get_pad_format(cam, sd_state, MTK_CAM_CIO_PAD_VIDEO,
> + fmt->which);
> + format->width = fmt->format.width;
> + format->height = fmt->format.height;
> + format->code = fmt->format.code;
> +
> + return 0;
> +}
> +
> +static int mtk_cam_subdev_registered(struct v4l2_subdev *sd)
> +{
> + struct mtk_cam_dev *cam = to_mtk_cam_dev(sd);
> +
> + /* Create the video device and link. */
> + return mtk_cam_video_register(cam);
> +}
> +
> +static const struct v4l2_subdev_video_ops mtk_cam_subdev_video_ops = {
> + .s_stream = mtk_cam_sd_s_stream,
> +};
> +
> +static const struct v4l2_subdev_pad_ops mtk_cam_subdev_pad_ops = {
> + .init_cfg = mtk_cam_init_cfg,
> + .enum_mbus_code = mtk_cam_enum_mbus_code,
> + .set_fmt = mtk_cam_set_fmt,
> + .get_fmt = mtk_cam_get_fmt,
> + .link_validate = v4l2_subdev_link_validate_default,
> +};
> +
> +static const struct v4l2_subdev_ops mtk_cam_subdev_ops = {
> + .video = &mtk_cam_subdev_video_ops,
> + .pad = &mtk_cam_subdev_pad_ops,
> +};
> +
> +static const struct v4l2_subdev_internal_ops mtk_cam_internal_ops = {
> + .registered = mtk_cam_subdev_registered,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Media Entity Operations
> + */
> +
> +static const struct media_entity_operations mtk_cam_media_entity_ops = {
> + .link_validate = v4l2_subdev_link_validate,
> + .get_fwnode_pad = v4l2_subdev_get_fwnode_pad_1_to_1,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Init & Cleanup
> + */
> +
> +static int mtk_cam_v4l2_register(struct mtk_cam_dev *cam)
> +{
> + struct device *dev = cam->dev;
> + int ret;
> +
> + cam->subdev_pads[MTK_CAM_CIO_PAD_SENINF].flags = MEDIA_PAD_FL_SINK;
> + cam->subdev_pads[MTK_CAM_CIO_PAD_VIDEO].flags = MEDIA_PAD_FL_SOURCE;
> +
> + /* Initialize subdev pads */
> + ret = media_entity_pads_init(&cam->subdev.entity,
> + ARRAY_SIZE(cam->subdev_pads),
> + cam->subdev_pads);
> + if (ret) {
> + dev_err(dev, "failed to initialize media pads:%d\n", ret);
> + return ret;
> + }
> +
> + /* Initialize subdev */
> + v4l2_subdev_init(&cam->subdev, &mtk_cam_subdev_ops);
> +
> + cam->subdev.dev = dev;
> + cam->subdev.entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
> + cam->subdev.entity.ops = &mtk_cam_media_entity_ops;
> + cam->subdev.internal_ops = &mtk_cam_internal_ops;
> + cam->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
> + strscpy(cam->subdev.name, dev_name(dev), sizeof(cam->subdev.name));
> + v4l2_set_subdevdata(&cam->subdev, cam);
> +
> + mtk_cam_init_cfg(&cam->subdev, NULL);
> +
> + ret = v4l2_async_register_subdev(&cam->subdev);
> + if (ret) {
> + dev_err(dev, "failed to initialize subdev:%d\n", ret);
> + media_entity_cleanup(&cam->subdev.entity);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void mtk_cam_v4l2_unregister(struct mtk_cam_dev *cam)
> +{
> + mtk_cam_video_unregister(&cam->vdev);
> +
> + media_entity_cleanup(&cam->subdev.entity);
> + v4l2_async_unregister_subdev(&cam->subdev);
> +}
> +
> +int mtk_cam_dev_init(struct mtk_cam_dev *cam_dev)
> +{
> + int ret;
> +
> + mutex_init(&cam_dev->op_lock);
> +
> + /* v4l2 sub-device registration */
> + ret = mtk_cam_v4l2_register(cam_dev);
> + if (ret) {
> + mutex_destroy(&cam_dev->op_lock);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +void mtk_cam_dev_cleanup(struct mtk_cam_dev *cam)
> +{
> + mtk_cam_v4l2_unregister(cam);
> + mutex_destroy(&cam->op_lock);
> +}
> diff --git a/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.h b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.h
> new file mode 100644
> index 000000000000..f7aec8c49db6
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv.h
> @@ -0,0 +1,199 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2020 BayLibre
> + * Copyright (c) 2022 MediaTek Inc.
> + */
> +
> +#ifndef __MTK_CAMSV_H__
> +#define __MTK_CAMSV_H__
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/errno.h>
> +#include <linux/kernel.h>
> +#include <linux/of_graph.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/videodev2.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-subdev.h>
> +#include <media/videobuf2-core.h>
> +#include <media/videobuf2-dma-contig.h>
> +#include <media/videobuf2-v4l2.h>
> +#include <soc/mediatek/smi.h>
> +
> +#define IMG_MAX_WIDTH 5376
> +#define IMG_MAX_HEIGHT 4032
> +#define IMG_DEF_WIDTH 1920
> +#define IMG_DEF_HEIGHT 1080
> +#define IMG_MIN_WIDTH 80
> +#define IMG_MIN_HEIGHT 60
> +
> +#define MTK_CAM_CIO_PAD_SENINF 0
> +#define MTK_CAM_CIO_PAD_VIDEO 1
> +#define MTK_CAM_CIO_NUM_PADS 2
You could add "U", these are all unsigned (int).
> +
> +struct mtk_cam_format_info {
> + u32 code;
> + u32 fourcc;
> + bool packed;
> + u8 bpp;
> +};
> +
> +struct mtk_cam_dev_buffer {
> + struct vb2_v4l2_buffer v4l2_buf;
> + struct list_head list;
> + dma_addr_t daddr;
> + void *vaddr;
> +};
> +
> +struct mtk_cam_sparams {
> + u32 w_factor;
> + u32 module_en_pak;
> + u32 fmt_sel;
> + u32 pak;
> + u32 imgo_stride;
> +};
> +
> +/**
> + * struct mtk_cam_vdev_desc - MTK camera device descriptor
> + * @name: name of the node
> + * @cap: supported V4L2 capabilities
> + * @buf_type: supported V4L2 buffer type
> + * @link_flags: default media link flags
> + * @def_width: the default format width
> + * @def_height: the default format height
> + * @num_fmts: the number of supported node formats
> + * @max_buf_count: maximum VB2 buffer count
> + * @ioctl_ops: mapped to v4l2_ioctl_ops
> + * @fmts: supported format
> + * @frmsizes: supported V4L2 frame size number
> + */
> +struct mtk_cam_vdev_desc {
> + const char *name;
> + u32 cap;
> + u32 buf_type;
> + u32 link_flags;
> + u32 def_width;
> + u32 def_height;
> + u8 num_fmts;
> + u8 max_buf_count;
> + const struct v4l2_ioctl_ops *ioctl_ops;
> + const u32 *fmts;
> + const struct v4l2_frmsizeenum *frmsizes;
How different are these for different devices? You seem to support only
one. Do you need this struct at all?
> +};
> +
> +/**
> + * struct mtk_cam_video_device - MediaTek video device structure
> + * @desc: The node description of video device
> + * @vdev_pad: The media pad graph object of video device
> + * @vdev: The video device instance
> + * @vbq: A videobuf queue of video device
> + * @vdev_lock: Serializes vb2 queue and video device operations
> + * @format: The V4L2 format of video device
> + * @fmtinfo: Information about the current format
> + */
> +struct mtk_cam_video_device {
> + const struct mtk_cam_vdev_desc *desc;
> +
> + struct media_pad vdev_pad;
> + struct video_device vdev;
> + struct vb2_queue vbq;
> +
> + /* Serializes vb2 queue and video device operations */
> + struct mutex vdev_lock;
> +
> + struct v4l2_pix_format_mplane format;
> + const struct mtk_cam_format_info *fmtinfo;
> +};
> +
> +/**
> + * struct mtk_cam_dev - MediaTek camera device structure.
> + * @dev: Pointer to device.
> + * @regs: Base address of CAMSV.
> + * @regs_img0: Base address of CAMSV IMG0.
> + * @regs_tg: Base address of CAMSV TG.
> + * @num_clks: Number of clocks.
> + * @clks: The clocks.
> + * @irq: Irq fired when buffer is ready.
> + * @conf: soc specific driver data.
> + * @pipeline: Media pipeline information.
> + * @subdev: The V4L2 sub-device instance.
> + * @subdev_pads: Media pads of this sub-device.
> + * @formats: Media bus format for all pads.
> + * @vdev: The video device node.
> + * @seninf: Pointer to the seninf pad.
> + * @streaming: Indicate the overall streaming status is on or off.
> + * @stream_count: Number of streaming video nodes.
> + * @sequence: Buffer sequence number.
> + * @op_lock: Serializes driver's VB2 callback operations.
> + * @irqlock: Protects the buffer list.
> + * @buf_list: List head for the buffer list.
> + * @hw_functions: Hardware specific functions.
> + * @dummy: Dummy buffer used when user buffer is not available.
> + * @dummy_size : Size of the dummy buffer.
> + * @is_dummy_used: True if dummy buffer is currently used.
> + */
> +struct mtk_cam_dev {
> + struct device *dev;
> + void __iomem *regs;
> + void __iomem *regs_img0;
> + void __iomem *regs_tg;
> +
> + unsigned int num_clks;
> + struct clk_bulk_data *clks;
> + unsigned int irq;
> + const struct mtk_cam_conf *conf;
> +
> + struct media_pipeline pipeline;
> + struct v4l2_subdev subdev;
> + struct media_pad subdev_pads[MTK_CAM_CIO_NUM_PADS];
> + struct v4l2_mbus_framefmt formats[MTK_CAM_CIO_NUM_PADS];
The format information should be stored in sub-device state.
> + struct mtk_cam_video_device vdev;
> + struct media_pad *seninf;
> + unsigned int streaming;
> + unsigned int stream_count;
> + unsigned int sequence;
> +
> + struct mutex op_lock;
> + spinlock_t irqlock;
> +
> + struct list_head buf_list;
> +
> + struct mtk_cam_hw_functions *hw_functions;
> +
> + struct mtk_cam_dev_buffer dummy;
> + unsigned int dummy_size;
> + bool is_dummy_used;
> +};
> +
> +/**
> + * struct mtk_cam_conf - MediaTek camera configuration structure
> + * @tg_sen_mode: TG sensor mode
> + * @module_en: module enable
> + * @imgo_con: dma control register
> + * @imgo_con2: dma control register 2
> + */
> +struct mtk_cam_conf {
> + u32 tg_sen_mode;
> + u32 module_en;
> + u32 imgo_con;
> + u32 imgo_con2;
> +};
> +
> +struct mtk_cam_hw_functions {
> + void (*mtk_cam_setup)(struct mtk_cam_dev *cam_dev, u32 width,
> + u32 height, u32 bpl, u32 mbus_fmt);
> + void (*mtk_cam_update_buffers_add)(struct mtk_cam_dev *cam_dev,
> + struct mtk_cam_dev_buffer *buf);
> + void (*mtk_cam_cmos_vf_hw_enable)(struct mtk_cam_dev *cam_dev,
> + bool pak_en);
> + void (*mtk_cam_cmos_vf_hw_disable)(struct mtk_cam_dev *cam_dev,
> + bool pak_en);
Is there a reason why these are not called directly? They appear to be the
same in all cases.
> +};
> +
> +int mtk_cam_dev_init(struct mtk_cam_dev *cam_dev);
> +void mtk_cam_dev_cleanup(struct mtk_cam_dev *cam_dev);
> +int mtk_cam_video_register(struct mtk_cam_dev *cam_dev);
> +void mtk_cam_video_unregister(struct mtk_cam_video_device *vdev);
> +
> +#endif /* __MTK_CAMSV_H__ */
> diff --git a/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_hw.c b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_hw.c
> new file mode 100644
> index 000000000000..3b8ccdab2af0
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_hw.c
> @@ -0,0 +1,427 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2020 BayLibre
> + * Copyright (c) 2022 MediaTek Inc.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/interrupt.h>
> +#include <linux/iommu.h>
> +#include <linux/iopoll.h>
> +#include <linux/ktime.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +
> +#include "mtk_camsv.h"
> +#include "mtk_camsv30_regs.h"
> +
> +#define MTK_CAMSV30_AUTOSUSPEND_DELAY_MS 100
> +
> +static const struct mtk_cam_conf camsv30_conf = {
> + .tg_sen_mode = 0x00010002U, /* TIME_STP_EN = 1. DBL_DATA_BUS = 1 */
> + .module_en = 0x40000001U, /* enable double buffer and TG */
> + .imgo_con = 0x80000080U, /* DMA FIFO depth and burst */
> + .imgo_con2 = 0x00020002U, /* DMA priority */
It would be nicer to have macro names for the bits of these, they appear
register configuration-like values.
> +};
> +
> +static void fmt_to_sparams(u32 mbus_fmt, struct mtk_cam_sparams *sparams)
> +{
> + switch (mbus_fmt) {
> + /* SBGGR values coming from isp5.0 configuration.
> + * not tested on isp2.0
> + */
/*
* Multi-line
* comment.
*/
> + case MEDIA_BUS_FMT_SBGGR12_1X12:
> + case MEDIA_BUS_FMT_SGBRG12_1X12:
> + case MEDIA_BUS_FMT_SGRBG12_1X12:
> + case MEDIA_BUS_FMT_SRGGB12_1X12:
> + sparams->w_factor = 1;
> + sparams->module_en_pak = 0x4;
> + sparams->fmt_sel = 0x2;
> + sparams->pak = 0x5;
> + sparams->imgo_stride = 0x000B0000;
> + break;
> + case MEDIA_BUS_FMT_SBGGR10_1X10:
> + case MEDIA_BUS_FMT_SGBRG10_1X10:
> + case MEDIA_BUS_FMT_SGRBG10_1X10:
> + case MEDIA_BUS_FMT_SRGGB10_1X10:
> + sparams->w_factor = 1;
> + sparams->module_en_pak = 0x4;
> + sparams->fmt_sel = 0x1;
> + sparams->pak = 0x6;
> + sparams->imgo_stride = 0x000B0000;
> + break;
> + case MEDIA_BUS_FMT_SBGGR8_1X8:
> + case MEDIA_BUS_FMT_SGBRG8_1X8:
> + case MEDIA_BUS_FMT_SGRBG8_1X8:
> + case MEDIA_BUS_FMT_SRGGB8_1X8:
> + sparams->w_factor = 1;
> + sparams->module_en_pak = 0x4;
> + sparams->fmt_sel = 0x0;
> + sparams->pak = 0x7;
> + sparams->imgo_stride = 0x000B0000;
> + break;
> + case MEDIA_BUS_FMT_UYVY8_1X16:
> + case MEDIA_BUS_FMT_VYUY8_1X16:
> + case MEDIA_BUS_FMT_YUYV8_1X16:
> + case MEDIA_BUS_FMT_YVYU8_1X16:
> + sparams->w_factor = 2;
> + sparams->module_en_pak = 0x8;
> + sparams->fmt_sel = 0x1000003;
> + sparams->pak = 0x0;
> + sparams->imgo_stride = 0x00090000;
> + break;
> + default:
> + break;
> + }
> +}
> +
> +static void mtk_camsv30_update_buffers_add(struct mtk_cam_dev *cam_dev,
> + struct mtk_cam_dev_buffer *buf)
> +{
> + writel(buf->daddr, cam_dev->regs_img0 + CAMSV_IMGO_SV_BASE_ADDR);
> +
> + writel(0x1U, cam_dev->regs + CAMSV_IMGO_FBC);
> +}
> +
> +static void mtk_camsv30_cmos_vf_hw_enable(struct mtk_cam_dev *cam_dev,
> + bool pak_en)
> +{
> + u32 clk_en;
> +
> + clk_en = CAMSV_TG_DP_CLK_EN | CAMSV_DMA_DP_CLK_EN;
> + if (pak_en)
> + clk_en |= CAMSV_PAK_DP_CLK_EN;
> + writel(clk_en, cam_dev->regs + CAMSV_CLK_EN);
> + writel(readl(cam_dev->regs_tg + CAMSV_TG_VF_CON) | CAMSV_TG_VF_CON_VFDATA_EN,
> + cam_dev->regs_tg + CAMSV_TG_VF_CON);
> +}
> +
> +static void mtk_camsv30_cmos_vf_hw_disable(struct mtk_cam_dev *cam_dev,
> + bool pak_en)
> +{
> + writel(readl(cam_dev->regs_tg + CAMSV_TG_SEN_MODE) & ~CAMSV_TG_SEN_MODE_CMOS_EN,
> + cam_dev->regs_tg + CAMSV_TG_SEN_MODE);
> + writel(readl(cam_dev->regs_tg + CAMSV_TG_VF_CON) & ~CAMSV_TG_VF_CON_VFDATA_EN,
> + cam_dev->regs_tg + CAMSV_TG_VF_CON);
> +}
> +
> +static void mtk_camsv30_setup(struct mtk_cam_dev *cam_dev, u32 w, u32 h,
> + u32 bpl, u32 mbus_fmt)
> +{
> + const struct mtk_cam_conf *conf = cam_dev->conf;
> + u32 int_en = INT_ST_MASK_CAMSV;
> + u32 tmp;
> + struct mtk_cam_sparams sparams;
> +
> + fmt_to_sparams(mbus_fmt, &sparams);
> +
> + if (pm_runtime_resume_and_get(cam_dev->dev) < 0) {
> + dev_err(cam_dev->dev, "failed to get pm_runtime\n");
> + return;
> + }
> +
> + spin_lock_irq(&cam_dev->irqlock);
> +
> + writel(conf->tg_sen_mode, cam_dev->regs_tg + CAMSV_TG_SEN_MODE);
> +
> + writel((w * sparams.w_factor) << 16U, cam_dev->regs_tg + CAMSV_TG_SEN_GRAB_PXL);
> +
> + writel(h << 16U, cam_dev->regs_tg + CAMSV_TG_SEN_GRAB_LIN);
> +
> + /* YUV_U2S_DIS: disable YUV sensor unsigned to signed */
> + writel(0x1000U, cam_dev->regs_tg + CAMSV_TG_PATH_CFG);
> +
> + /* Reset cam */
> + writel(CAMSV_SW_RST, cam_dev->regs + CAMSV_SW_CTL);
> + writel(0x0U, cam_dev->regs + CAMSV_SW_CTL);
> + writel(CAMSV_IMGO_RST_TRIG, cam_dev->regs + CAMSV_SW_CTL);
> +
> + readl_poll_timeout_atomic(cam_dev->regs + CAMSV_SW_CTL, tmp,
> + (tmp == (CAMSV_IMGO_RST_TRIG | CAMSV_IMGO_RST_ST)), 10, 200);
Alignment. Same elsewhere in the function.
> +
> + writel(0x0U, cam_dev->regs + CAMSV_SW_CTL);
> +
> + writel(int_en, cam_dev->regs + CAMSV_INT_EN);
> +
> + writel(conf->module_en | sparams.module_en_pak,
> + cam_dev->regs + CAMSV_MODULE_EN);
> + writel(sparams.fmt_sel, cam_dev->regs + CAMSV_FMT_SEL);
> + writel(sparams.pak, cam_dev->regs + CAMSV_PAK);
> +
> + writel(bpl - 1U, cam_dev->regs_img0 + CAMSV_IMGO_SV_XSIZE);
> + writel(h - 1U, cam_dev->regs_img0 + CAMSV_IMGO_SV_YSIZE);
> +
> + writel(sparams.imgo_stride | bpl, cam_dev->regs_img0 + CAMSV_IMGO_SV_STRIDE);
> +
> + writel(conf->imgo_con, cam_dev->regs_img0 + CAMSV_IMGO_SV_CON);
> + writel(conf->imgo_con2, cam_dev->regs_img0 + CAMSV_IMGO_SV_CON2);
> +
> + /* CMOS_EN first */
> + writel(readl(cam_dev->regs_tg + CAMSV_TG_SEN_MODE) | CAMSV_TG_SEN_MODE_CMOS_EN,
> + cam_dev->regs_tg + CAMSV_TG_SEN_MODE);
> +
> + /* finally, CAMSV_MODULE_EN : IMGO_EN */
> + writel(readl(cam_dev->regs + CAMSV_MODULE_EN) | CAMSV_MODULE_EN_IMGO_EN,
> + cam_dev->regs + CAMSV_MODULE_EN);
> +
> + spin_unlock_irq(&cam_dev->irqlock);
> + pm_runtime_put_autosuspend(cam_dev->dev);
> +}
> +
> +static irqreturn_t isp_irq_camsv30(int irq, void *data)
> +{
> + struct mtk_cam_dev *cam_dev = (struct mtk_cam_dev *)data;
> + struct mtk_cam_dev_buffer *buf;
> + unsigned int irq_status;
> +
> + spin_lock(&cam_dev->irqlock);
> +
> + irq_status = readl(cam_dev->regs + CAMSV_INT_STATUS);
> +
> + if (irq_status & INT_ST_MASK_CAMSV_ERR) {
> + dev_err(cam_dev->dev, "irq error 0x%x\n",
> + (unsigned int)(irq_status & INT_ST_MASK_CAMSV_ERR));
Maybe %lx and remove the casting?
> + }
> +
> + /* De-queue frame */
> + if (irq_status & CAMSV_IRQ_PASS1_DON) {
> + cam_dev->sequence++;
> +
> + if (!cam_dev->is_dummy_used) {
> + buf = list_first_entry_or_null(&cam_dev->buf_list,
> + struct mtk_cam_dev_buffer,
> + list);
> + if (buf) {
> + buf->v4l2_buf.sequence = cam_dev->sequence;
> + buf->v4l2_buf.vb2_buf.timestamp = ktime_get_ns();
> + vb2_buffer_done(&buf->v4l2_buf.vb2_buf,
> + VB2_BUF_STATE_DONE);
> + list_del(&buf->list);
> + }
> + }
> +
> + if (list_empty(&cam_dev->buf_list)) {
> + mtk_camsv30_update_buffers_add(cam_dev, &cam_dev->dummy);
> + cam_dev->is_dummy_used = true;
> + } else {
> + buf = list_first_entry_or_null(&cam_dev->buf_list,
> + struct mtk_cam_dev_buffer,
> + list);
> + mtk_camsv30_update_buffers_add(cam_dev, buf);
> + cam_dev->is_dummy_used = false;
> + }
> + }
> +
> + spin_unlock(&cam_dev->irqlock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int mtk_camsv30_runtime_suspend(struct device *dev)
> +{
> + struct mtk_cam_dev *cam_dev = dev_get_drvdata(dev);
> + struct vb2_queue *vbq = &cam_dev->vdev.vbq;
> +
> + if (vb2_is_streaming(vbq)) {
> + mutex_lock(&cam_dev->op_lock);
> + v4l2_subdev_call(&cam_dev->subdev, video, s_stream, 0);
> + mutex_unlock(&cam_dev->op_lock);
> + }
> +
> + clk_bulk_disable_unprepare(cam_dev->num_clks, cam_dev->clks);
> +
> + return 0;
> +}
> +
> +static int mtk_camsv30_runtime_resume(struct device *dev)
> +{
> + struct mtk_cam_dev *cam_dev = dev_get_drvdata(dev);
> + struct mtk_cam_video_device *vdev = &cam_dev->vdev;
> + const struct v4l2_pix_format_mplane *fmt = &vdev->format;
> + struct vb2_queue *vbq = &vdev->vbq;
> + struct mtk_cam_dev_buffer *buf, *buf_prev;
> + int ret;
> + unsigned long flags = 0;
> +
> + ret = clk_bulk_prepare_enable(cam_dev->num_clks, cam_dev->clks);
> + if (ret) {
> + dev_err(dev, "failed to enable clock:%d\n", ret);
> + return ret;
> + }
> +
> + if (vb2_is_streaming(vbq)) {
> +
> + mtk_camsv30_setup(cam_dev, fmt->width, fmt->height,
> + fmt->plane_fmt[0].bytesperline, vdev->fmtinfo->code);
> +
> + spin_lock_irqsave(&cam_dev->irqlock, flags);
> + buf = list_first_entry_or_null(&cam_dev->buf_list,
> + struct mtk_cam_dev_buffer,
> + list);
> + if (buf) {
> + mtk_camsv30_update_buffers_add(cam_dev, buf);
> + cam_dev->is_dummy_used = false;
> + } else {
> + mtk_camsv30_update_buffers_add(cam_dev, &cam_dev->dummy);
> + cam_dev->is_dummy_used = true;
> + }
> +
> + mtk_camsv30_cmos_vf_hw_enable(cam_dev, vdev->fmtinfo->packed);
> +
> + spin_unlock_irqrestore(&cam_dev->irqlock, flags);
> +
> + /* Stream on the sub-device */
> + mutex_lock(&cam_dev->op_lock);
> + ret = v4l2_subdev_call(&cam_dev->subdev, video, s_stream, 1);
> +
> + if (ret) {
> + cam_dev->stream_count--;
> + if (cam_dev->stream_count == 0)
> + media_pipeline_stop(vdev->vdev.entity.pads);
> + }
> + mutex_unlock(&cam_dev->op_lock);
> +
> + if (ret)
> + goto fail_no_stream;
> + }
> +
> + return 0;
> +
> +fail_no_stream:
> + spin_lock_irqsave(&cam_dev->irqlock, flags);
> + list_for_each_entry_safe(buf, buf_prev, &cam_dev->buf_list, list) {
> + buf->daddr = 0ULL;
> + list_del(&buf->list);
> + vb2_buffer_done(&buf->v4l2_buf.vb2_buf, VB2_BUF_STATE_ERROR);
> + }
> + spin_unlock_irqrestore(&cam_dev->irqlock, flags);
> + return ret;
> +}
> +
> +static struct mtk_cam_hw_functions mtk_camsv30_hw_functions = {
const.
> + .mtk_cam_setup = mtk_camsv30_setup,
> + .mtk_cam_update_buffers_add = mtk_camsv30_update_buffers_add,
> + .mtk_cam_cmos_vf_hw_enable = mtk_camsv30_cmos_vf_hw_enable,
> + .mtk_cam_cmos_vf_hw_disable = mtk_camsv30_cmos_vf_hw_disable,
> +};
> +
> +static int mtk_camsv30_probe(struct platform_device *pdev)
> +{
> + static const char * const clk_names[] = { "cam", "camtg", "camsv"};
> +
> + struct mtk_cam_dev *cam_dev;
> + struct device *dev = &pdev->dev;
> + int ret;
> + int i;
> +
> + if (!iommu_present(&platform_bus_type))
> + return -EPROBE_DEFER;
> +
> + cam_dev = devm_kzalloc(dev, sizeof(*cam_dev), GFP_KERNEL);
> + if (!cam_dev)
> + return -ENOMEM;
> +
> + cam_dev->conf = of_device_get_match_data(dev);
> + if (!cam_dev->conf)
> + return -ENODEV;
> +
> + cam_dev->dev = dev;
> + dev_set_drvdata(dev, cam_dev);
> +
> + cam_dev->regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(cam_dev->regs))
> + return dev_err_probe(dev, PTR_ERR(cam_dev->regs),
> + "failed to map register base\n");
> +
> +
> + cam_dev->regs_img0 = devm_platform_ioremap_resource(pdev, 1);
> +
> + if (IS_ERR(cam_dev->regs_img0))
> + return dev_err_probe(dev, PTR_ERR(cam_dev->regs_img0),
> + "failed to map img0 register base\n");
> +
> +
> + cam_dev->regs_tg = devm_platform_ioremap_resource(pdev, 2);
> + if (IS_ERR(cam_dev->regs_tg))
> + return dev_err_probe(dev, PTR_ERR(cam_dev->regs_tg),
> + "failed to map TG register base\n");
> +
> +
> + cam_dev->num_clks = ARRAY_SIZE(clk_names);
> + cam_dev->clks = devm_kcalloc(dev, cam_dev->num_clks,
> + sizeof(*cam_dev->clks), GFP_KERNEL);
> + if (!cam_dev->clks)
> + return -ENOMEM;
> +
> + for (i = 0; i < cam_dev->num_clks; ++i)
> + cam_dev->clks[i].id = clk_names[i];
> +
> + ret = devm_clk_bulk_get(dev, cam_dev->num_clks, cam_dev->clks);
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to get clocks: %i\n", ret);
> +
> +
> + cam_dev->irq = platform_get_irq(pdev, 0);
> + ret = devm_request_irq(dev, cam_dev->irq,
> + isp_irq_camsv30, 0,
> + dev_name(dev), cam_dev);
Fits on fewer lines.
> + if (ret != 0)
> + return dev_err_probe(dev, -ENODEV, "failed to request irq=%d\n",
> + cam_dev->irq);
Alignment.
> +
> + cam_dev->hw_functions = &mtk_camsv30_hw_functions;
> +
> + spin_lock_init(&cam_dev->irqlock);
> +
> + /* initialise runtime power management */
> + pm_runtime_set_autosuspend_delay(dev, MTK_CAMSV30_AUTOSUSPEND_DELAY_MS);
> + pm_runtime_use_autosuspend(dev);
> + pm_runtime_set_suspended(dev);
> + pm_runtime_enable(dev);
> +
> + /* Initialize the v4l2 common part */
> + return mtk_cam_dev_init(cam_dev);
> +}
> +
> +static int mtk_camsv30_remove(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct mtk_cam_dev *cam_dev = dev_get_drvdata(dev);
> +
> + mtk_cam_dev_cleanup(cam_dev);
> + pm_runtime_put_autosuspend(dev);
> + pm_runtime_disable(dev);
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops mtk_camsv30_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> + pm_runtime_force_resume)
> + SET_RUNTIME_PM_OPS(mtk_camsv30_runtime_suspend,
> + mtk_camsv30_runtime_resume, NULL)
> +};
> +
> +static const struct of_device_id mtk_camsv30_of_ids[] = {
> + { .compatible = "mediatek,mt8365-camsv", .data = &camsv30_conf },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, mtk_camsv30_of_ids);
> +
> +static struct platform_driver mtk_camsv30_driver = {
> + .probe = mtk_camsv30_probe,
> + .remove = mtk_camsv30_remove,
> + .driver = {
> + .name = "mtk-camsv-isp30",
> + .of_match_table = mtk_camsv30_of_ids,
> + .pm = &mtk_camsv30_pm_ops,
> + }
> +};
> +
> +module_platform_driver(mtk_camsv30_driver);
> +
> +MODULE_DESCRIPTION("MediaTek CAMSV ISP3.0 driver");
> +MODULE_AUTHOR("Florian Sylvestre <fsylvestre@baylibre.com>");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_regs.h b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_regs.h
> new file mode 100644
> index 000000000000..6d30087270cc
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv30_regs.h
> @@ -0,0 +1,60 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2022 MediaTek Inc.
> + */
> +
> +#ifndef __MTK_CAMSV30_REGS_H__
> +#define __MTK_CAMSV30_REGS_H__
> +
> +/* CAMSV */
> +#define CAMSV_MODULE_EN 0x0000
> +#define CAMSV_MODULE_EN_IMGO_EN BIT(4)
> +#define CAMSV_FMT_SEL 0x0004
> +#define CAMSV_INT_EN 0x0008
> +#define CAMSV_INT_STATUS 0x000c
> +#define CAMSV_SW_CTL 0x0010
> +#define CAMSV_IMGO_FBC 0x001C
> +#define CAMSV_CLK_EN 0x0020
> +#define CAMSV_PAK 0x003c
> +
> +/* CAMSV_TG */
> +#define CAMSV_TG_SEN_MODE 0x0010
> +#define CAMSV_TG_VF_CON 0x0014
> +#define CAMSV_TG_SEN_GRAB_PXL 0x0018
> +#define CAMSV_TG_SEN_GRAB_LIN 0x001c
> +#define CAMSV_TG_PATH_CFG 0x0020
> +
> +/* CAMSV_IMG0 */
> +#define CAMSV_IMGO_SV_BASE_ADDR 0x0000
> +#define CAMSV_IMGO_SV_XSIZE 0x0008
> +#define CAMSV_IMGO_SV_YSIZE 0x000c
> +#define CAMSV_IMGO_SV_STRIDE 0x0010
> +#define CAMSV_IMGO_SV_CON 0x0014
> +#define CAMSV_IMGO_SV_CON2 0x0018
> +
> +#define CAMSV_TG_SEN_MODE_CMOS_EN BIT(0)
> +#define CAMSV_TG_VF_CON_VFDATA_EN BIT(0)
> +
> +/* CAMSV_CLK_EN bits */
> +#define CAMSV_TG_DP_CLK_EN BIT(0)
> +#define CAMSV_PAK_DP_CLK_EN BIT(2)
> +#define CAMSV_DMA_DP_CLK_EN BIT(15)
> +
> +/* CAMSV_SW_CTL bits */
> +#define CAMSV_IMGO_RST_TRIG BIT(0)
> +#define CAMSV_IMGO_RST_ST BIT(1)
> +#define CAMSV_SW_RST BIT(2)
> +
> +/* IRQ BITS */
> +#define CAMSV_IRQ_TG_ERR BIT(4)
> +#define CAMSV_IRQ_TG_GBERR BIT(5)
> +#define CAMSV_IRQ_PASS1_DON BIT(10)
> +#define CAMSV_IRQ_IMGO_ERR BIT(16)
> +
> +#define INT_ST_MASK_CAMSV \
> + (CAMSV_IRQ_PASS1_DON)
> +
> +#define INT_ST_MASK_CAMSV_ERR \
> + (CAMSV_IRQ_TG_ERR | CAMSV_IRQ_TG_GBERR | CAMSV_IRQ_IMGO_ERR)
> +
> +#endif /* __MTK_CAMSV30_REGS_H__ */
> diff --git a/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv_video.c b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv_video.c
> new file mode 100644
> index 000000000000..2ea474eabb99
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/isp_30/camsv/mtk_camsv_video.c
> @@ -0,0 +1,774 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * mtk_camsv_video.c - V4L2 video node support
> + *
> + * Copyright (c) 2020 BayLibre
> + * Copyright (c) 2022 MediaTek Inc.
> + */
> +
> +#include <linux/version.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/v4l2-mediabus.h>
> +
> +#include "mtk_camsv.h"
> +
> +static inline struct mtk_cam_video_device *
> +file_to_mtk_cam_video_device(struct file *__file)
> +{
> + return container_of(video_devdata(__file),
> + struct mtk_cam_video_device, vdev);
> +}
> +
> +static inline struct mtk_cam_video_device *
> +vb2_queue_to_mtk_cam_video_device(struct vb2_queue *vq)
> +{
> + return container_of(vq, struct mtk_cam_video_device, vbq);
> +}
> +
> +static inline struct mtk_cam_dev_buffer *
> +to_mtk_cam_dev_buffer(struct vb2_buffer *buf)
> +{
> + return container_of(buf, struct mtk_cam_dev_buffer, v4l2_buf.vb2_buf);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Format Information
> + */
> +
> +static const struct mtk_cam_format_info mtk_cam_format_info[] = {
> + {
> + .fourcc = V4L2_PIX_FMT_SBGGR8,
> + .code = MEDIA_BUS_FMT_SBGGR8_1X8,
> + .packed = true,
> + .bpp = 8,
> + }, {
> + .fourcc = V4L2_PIX_FMT_SGBRG8,
> + .code = MEDIA_BUS_FMT_SGBRG8_1X8,
> + .packed = true,
> + .bpp = 8,
> + }, {
> + .fourcc = V4L2_PIX_FMT_SGRBG8,
> + .code = MEDIA_BUS_FMT_SGRBG8_1X8,
> + .packed = true,
> + .bpp = 8,
> + }, {
> + .fourcc = V4L2_PIX_FMT_SRGGB8,
> + .code = MEDIA_BUS_FMT_SRGGB8_1X8,
> + .packed = true,
> + .bpp = 8,
> + }, {
> + .fourcc = V4L2_PIX_FMT_YUYV,
> + .code = MEDIA_BUS_FMT_YUYV8_1X16,
> + .packed = true,
> + .bpp = 16,
> + }, {
> + .fourcc = V4L2_PIX_FMT_YVYU,
> + .code = MEDIA_BUS_FMT_YVYU8_1X16,
> + .packed = true,
> + .bpp = 16,
> + }, {
> + .fourcc = V4L2_PIX_FMT_UYVY,
> + .code = MEDIA_BUS_FMT_UYVY8_1X16,
> + .packed = true,
> + .bpp = 16,
> + }, {
> + .fourcc = V4L2_PIX_FMT_VYUY,
> + .code = MEDIA_BUS_FMT_VYUY8_1X16,
> + .packed = true,
> + .bpp = 16,
> + },
> +};
> +
> +static const struct mtk_cam_format_info *
> +mtk_cam_format_info_by_fourcc(u32 fourcc)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(mtk_cam_format_info); ++i) {
> + const struct mtk_cam_format_info *info =
> + &mtk_cam_format_info[i];
> +
> + if (info->fourcc == fourcc)
> + return info;
> + }
> +
> + return NULL;
> +}
> +
> +static const struct mtk_cam_format_info *
> +mtk_cam_format_info_by_code(u32 code)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(mtk_cam_format_info); ++i) {
> + const struct mtk_cam_format_info *info =
> + &mtk_cam_format_info[i];
> +
> + if (info->code == code)
> + return info;
> + }
> +
> + return NULL;
> +}
> +
> +static bool mtk_cam_dev_find_fmt(const struct mtk_cam_vdev_desc *desc,
> + u32 format)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < desc->num_fmts; i++) {
> + if (desc->fmts[i] == format)
> + return true;
> + }
> +
> + return false;
> +}
> +
> +static void calc_bpl_size_pix_mp(const struct mtk_cam_format_info *fmtinfo,
> + struct v4l2_pix_format_mplane *pix_mp)
> +{
> + unsigned int bpl;
> + unsigned int i;
> +
> + bpl = ALIGN(DIV_ROUND_UP(pix_mp->width * fmtinfo->bpp, 8), 2);
> +
> + for (i = 0; i < pix_mp->num_planes; ++i) {
> + pix_mp->plane_fmt[i].bytesperline = bpl;
> + pix_mp->plane_fmt[i].sizeimage = bpl * pix_mp->height;
> + }
> +}
> +
> +static void mtk_cam_dev_load_default_fmt(struct mtk_cam_dev *cam)
> +{
> + struct mtk_cam_video_device *vdev = &cam->vdev;
> + struct v4l2_pix_format_mplane *fmt = &vdev->format;
> +
> + fmt->num_planes = 1;
> + fmt->pixelformat = vdev->desc->fmts[0];
> + fmt->width = vdev->desc->def_width;
> + fmt->height = vdev->desc->def_height;
> +
> + fmt->colorspace = V4L2_COLORSPACE_SRGB;
> + fmt->field = V4L2_FIELD_NONE;
> + fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> + fmt->quantization = V4L2_QUANTIZATION_DEFAULT;
> + fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT;
> +
> + vdev->fmtinfo = mtk_cam_format_info_by_fourcc(fmt->pixelformat);
> +
> + calc_bpl_size_pix_mp(vdev->fmtinfo, fmt);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * VB2 Queue Operations
> + */
> +
> +static int mtk_cam_vb2_queue_setup(struct vb2_queue *vq,
> + unsigned int *num_buffers,
> + unsigned int *num_planes,
> + unsigned int sizes[],
> + struct device *alloc_devs[])
> +{
> + struct mtk_cam_video_device *vdev =
> + vb2_queue_to_mtk_cam_video_device(vq);
> + unsigned int max_buffer_count = vdev->desc->max_buf_count;
> + const struct v4l2_pix_format_mplane *fmt = &vdev->format;
> + unsigned int size;
> + unsigned int np_conf;
> + unsigned int i;
> +
> + /* Check the limitation of buffer size */
> + if (max_buffer_count)
> + *num_buffers = clamp_val(*num_buffers, 1, max_buffer_count);
> +
> + size = fmt->plane_fmt[0].sizeimage;
> + /* Add for q.create_bufs with fmt.g_sizeimage(p) / 2 test */
> +
> + np_conf = 1;
> +
> + if (*num_planes == 0) {
> + *num_planes = np_conf;
> + for (i = 0; i < *num_planes; ++i)
> + sizes[i] = size;
> + } else if (*num_planes != np_conf || sizes[0] < size) {
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int mtk_cam_vb2_buf_init(struct vb2_buffer *vb)
> +{
> + struct mtk_cam_dev_buffer *buf = to_mtk_cam_dev_buffer(vb);
> +
> + buf->daddr = 0ULL;
> +
> + return 0;
> +}
> +
> +static int mtk_cam_vb2_buf_prepare(struct vb2_buffer *vb)
> +{
> + struct mtk_cam_video_device *vdev =
> + vb2_queue_to_mtk_cam_video_device(vb->vb2_queue);
> + struct mtk_cam_dev *cam = vb2_get_drv_priv(vb->vb2_queue);
> + struct mtk_cam_dev_buffer *buf = to_mtk_cam_dev_buffer(vb);
> + const struct v4l2_pix_format_mplane *fmt = &vdev->format;
> + u32 size;
> + int i;
> +
> + for (i = 0; i < vb->num_planes; i++) {
> + size = fmt->plane_fmt[i].sizeimage;
> + if (vb2_plane_size(vb, i) < size) {
> + dev_err(cam->dev, "plane size is too small:%lu<%u\n",
> + vb2_plane_size(vb, i), size);
> + return -EINVAL;
> + }
> + }
> +
> + buf->v4l2_buf.field = V4L2_FIELD_NONE;
> +
> + for (i = 0; i < vb->num_planes; i++) {
> + size = fmt->plane_fmt[i].sizeimage;
> + vb2_set_plane_payload(vb, i, size);
> + }
> +
> + if (buf->daddr == 0ULL)
if (!buf->daddr)
> + buf->daddr = vb2_dma_contig_plane_dma_addr(vb, 0);
> +
> + return 0;
> +}
> +
> +static void mtk_cam_vb2_buf_queue(struct vb2_buffer *vb)
> +{
> + struct mtk_cam_dev *cam = vb2_get_drv_priv(vb->vb2_queue);
> + struct mtk_cam_dev_buffer *buf = to_mtk_cam_dev_buffer(vb);
> + unsigned long flags = 0;
> +
> + /* added the buffer into the tracking list */
> + spin_lock_irqsave(&cam->irqlock, flags);
> + list_add_tail(&buf->list, &cam->buf_list);
> + spin_unlock_irqrestore(&cam->irqlock, flags);
> +}
> +
> +static void mtk_cam_vb2_return_all_buffers(struct mtk_cam_dev *cam,
> + enum vb2_buffer_state state)
> +{
> + struct mtk_cam_dev_buffer *buf, *buf_prev;
> + unsigned long flags = 0;
> +
> + spin_lock_irqsave(&cam->irqlock, flags);
> + list_for_each_entry_safe(buf, buf_prev, &cam->buf_list, list) {
> + buf->daddr = 0ULL;
> + list_del(&buf->list);
> + vb2_buffer_done(&buf->v4l2_buf.vb2_buf, state);
> + }
> + spin_unlock_irqrestore(&cam->irqlock, flags);
> +}
> +
> +static void mtk_cam_cmos_vf_enable(struct mtk_cam_dev *cam_dev,
> + bool enable, bool pak_en)
> +{
> + struct device *dev = cam_dev->dev;
> + unsigned long flags = 0;
No need to initialise flags. Same elsewhere.
> +
> + if (pm_runtime_get_sync(dev) < 0) {
> + dev_err(dev, "failed to get pm_runtime\n");
> + goto out;
> + }
> +
> + spin_lock_irqsave(&cam_dev->irqlock, flags);
> + if (enable)
> + (*cam_dev->hw_functions->mtk_cam_cmos_vf_hw_enable)(cam_dev, pak_en);
> + else
> + (*cam_dev->hw_functions->mtk_cam_cmos_vf_hw_disable)(cam_dev, pak_en);
cam_dev->...(...);
> + spin_unlock_irqrestore(&cam_dev->irqlock, flags);
> +
> +out:
> + pm_runtime_put_autosuspend(dev);
> +}
> +
> +static int mtk_cam_verify_format(struct mtk_cam_dev *cam)
> +{
> + struct mtk_cam_video_device *vdev = &cam->vdev;
> + struct v4l2_subdev_format fmt = {
> + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
> + .pad = MTK_CAM_CIO_PAD_VIDEO,
> + };
> + int ret;
> +
> + ret = v4l2_subdev_call(&cam->subdev, pad, get_fmt, NULL, &fmt);
> + if (ret < 0)
> + return ret == -ENOIOCTLCMD ? -EINVAL : ret;
> +
> + if (vdev->fmtinfo->code != fmt.format.code ||
> + vdev->format.height != fmt.format.height ||
> + vdev->format.width != fmt.format.width)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static int mtk_cam_vb2_start_streaming(struct vb2_queue *vq,
> + unsigned int count)
> +{
> + struct mtk_cam_dev *cam = vb2_get_drv_priv(vq);
> + struct mtk_cam_dev_buffer *buf;
> + struct mtk_cam_video_device *vdev =
> + vb2_queue_to_mtk_cam_video_device(vq);
> + struct device *dev = cam->dev;
> + const struct v4l2_pix_format_mplane *fmt = &vdev->format;
> + int ret;
> + unsigned long flags = 0;
> +
> + if (pm_runtime_get_sync(dev) < 0) {
> + dev_err(dev, "failed to get pm_runtime\n");
> + pm_runtime_put_autosuspend(dev);
> + return -1;
> + }
> +
> + (*cam->hw_functions->mtk_cam_setup)(cam, fmt->width, fmt->height,
> + fmt->plane_fmt[0].bytesperline, vdev->fmtinfo->code);
> +
> +
> + /* Enable CMOS and VF */
> + mtk_cam_cmos_vf_enable(cam, true, vdev->fmtinfo->packed);
> +
> + mutex_lock(&cam->op_lock);
> +
> + ret = mtk_cam_verify_format(cam);
This should be called via the link_validate callback instead.
> + if (ret < 0)
> + goto fail_unlock;
> +
> + /* Start streaming of the whole pipeline now*/
> + if (!cam->pipeline.start_count) {
> + ret = media_pipeline_start(vdev->vdev.entity.pads,
> + &cam->pipeline);
> + if (ret) {
> + dev_err(dev, "failed to start pipeline:%d\n", ret);
> + goto fail_unlock;
> + }
> + }
> +
> + /* Media links are fixed after media_pipeline_start */
> + cam->stream_count++;
> +
> + cam->sequence = (unsigned int)-1;
> +
> + /* Stream on the sub-device */
> + ret = v4l2_subdev_call(&cam->subdev, video, s_stream, 1);
> + if (ret)
> + goto fail_no_stream;
> +
> + mutex_unlock(&cam->op_lock);
> +
> + /* Create dummy buffer */
> + cam->dummy_size = fmt->plane_fmt[0].sizeimage;
> +
> + cam->dummy.vaddr = dma_alloc_coherent(cam->dev, cam->dummy_size,
> + &cam->dummy.daddr, GFP_KERNEL);
> + if (!cam->dummy.vaddr) {
> + ret = -ENOMEM;
> + goto fail_no_buffer;
> + }
> +
> + /* update first buffer address */
> +
> + /* added the buffer into the tracking list */
> + spin_lock_irqsave(&cam->irqlock, flags);
> + if (list_empty(&cam->buf_list)) {
> + (*cam->hw_functions->mtk_cam_update_buffers_add)(cam, &cam->dummy);
> + cam->is_dummy_used = true;
> + } else {
> + buf = list_first_entry_or_null(&cam->buf_list,
> + struct mtk_cam_dev_buffer,
> + list);
> + (*cam->hw_functions->mtk_cam_update_buffers_add)(cam, buf);
> + cam->is_dummy_used = false;
> + }
> + spin_unlock_irqrestore(&cam->irqlock, flags);
> +
> + return 0;
> +
> +fail_no_buffer:
> + mutex_lock(&cam->op_lock);
> + v4l2_subdev_call(&cam->subdev, video, s_stream, 0);
> +fail_no_stream:
> + cam->stream_count--;
> + if (cam->stream_count == 0)
> + media_pipeline_stop(vdev->vdev.entity.pads);
> +fail_unlock:
> + mutex_unlock(&cam->op_lock);
> + mtk_cam_vb2_return_all_buffers(cam, VB2_BUF_STATE_QUEUED);
> +
> + return ret;
> +}
> +
> +static void mtk_cam_vb2_stop_streaming(struct vb2_queue *vq)
> +{
> + struct mtk_cam_dev *cam = vb2_get_drv_priv(vq);
> + struct mtk_cam_video_device *vdev =
> + vb2_queue_to_mtk_cam_video_device(vq);
> +
> + /* Disable CMOS and VF */
> + mtk_cam_cmos_vf_enable(cam, false, false);
> +
> + mutex_lock(&cam->op_lock);
> +
> + v4l2_subdev_call(&cam->subdev, video, s_stream, 0);
> +
> + mtk_cam_vb2_return_all_buffers(cam, VB2_BUF_STATE_ERROR);
> + cam->stream_count--;
> + if (cam->stream_count) {
> + mutex_unlock(&cam->op_lock);
> + return;
> + }
> +
> + /* Destroy dummy buffer */
> + if (cam->dummy.vaddr) {
> + dma_free_coherent(cam->dev, cam->dummy_size, cam->dummy.vaddr,
> + cam->dummy.daddr);
> + memset(&cam->dummy, 0, sizeof(cam->dummy));
> + cam->dummy_size = 0;
> + cam->is_dummy_used = false;
> + }
> +
> + mutex_unlock(&cam->op_lock);
> +
> + media_pipeline_stop(vdev->vdev.entity.pads);
> +}
> +
> +static const struct vb2_ops mtk_cam_vb2_ops = {
> + .queue_setup = mtk_cam_vb2_queue_setup,
> + .buf_init = mtk_cam_vb2_buf_init,
> + .buf_prepare = mtk_cam_vb2_buf_prepare,
> + .buf_queue = mtk_cam_vb2_buf_queue,
> + .start_streaming = mtk_cam_vb2_start_streaming,
> + .stop_streaming = mtk_cam_vb2_stop_streaming,
> + .wait_prepare = vb2_ops_wait_prepare,
> + .wait_finish = vb2_ops_wait_finish,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * V4L2 Video IOCTLs
> + */
> +
> +static int mtk_cam_vidioc_querycap(struct file *file, void *fh,
> + struct v4l2_capability *cap)
> +{
> + struct mtk_cam_dev *cam = video_drvdata(file);
> +
> + strscpy(cap->driver, dev_driver_string(cam->dev), sizeof(cap->driver));
> + strscpy(cap->card, dev_driver_string(cam->dev), sizeof(cap->card));
> + snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
> + dev_name(cam->dev));
The bus_info field is set by the V4L2 framework.
> +
> + /* Minimum v4l2 api kernel version required by libcamera is 5.0.0 */
> + cap->version = KERNEL_VERSION(5, 0, 0);
Hmm. You can drop this.
> +
> + return 0;
> +}
> +
> +static int mtk_cam_vidioc_enum_fmt(struct file *file, void *fh,
> + struct v4l2_fmtdesc *f)
> +{
> + struct mtk_cam_video_device *vdev = file_to_mtk_cam_video_device(file);
> + const struct mtk_cam_format_info *fmtinfo;
> + unsigned int i;
> +
> + /* If mbus_code is not set enumerate all supported formats. */
> + if (!f->mbus_code) {
> + if (f->index >= vdev->desc->num_fmts)
> + return -EINVAL;
> +
> + /* f->description is filled in v4l_fill_fmtdesc function */
> + f->pixelformat = vdev->desc->fmts[f->index];
> + f->flags = 0;
> +
> + return 0;
> + }
> +
> + /*
> + * Otherwise only enumerate supported pixel formats corresponding to
> + * that bus code.
> + */
> + if (f->index)
> + return -EINVAL;
> +
> + fmtinfo = mtk_cam_format_info_by_code(f->mbus_code);
> + if (!fmtinfo)
> + return -EINVAL;
> +
> + for (i = 0; i < vdev->desc->num_fmts; ++i) {
> + if (vdev->desc->fmts[i] == fmtinfo->fourcc) {
> + f->pixelformat = fmtinfo->fourcc;
> + f->flags = 0;
> + return 0;
> + }
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int mtk_cam_vidioc_g_fmt(struct file *file, void *fh,
> + struct v4l2_format *f)
> +{
> + struct mtk_cam_video_device *vdev = file_to_mtk_cam_video_device(file);
> +
> + f->fmt.pix_mp = vdev->format;
> +
> + return 0;
> +}
> +
> +static int mtk_cam_vidioc_try_fmt(struct file *file, void *fh,
> + struct v4l2_format *f)
> +{
> + struct mtk_cam_video_device *vdev = file_to_mtk_cam_video_device(file);
> + struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
> + const struct mtk_cam_format_info *fmtinfo;
> +
> + /* Validate pixelformat */
> + if (!mtk_cam_dev_find_fmt(vdev->desc, pix_mp->pixelformat))
> + pix_mp->pixelformat = vdev->desc->fmts[0];
> +
> + pix_mp->width = clamp_val(pix_mp->width, IMG_MIN_WIDTH, IMG_MAX_WIDTH);
> + pix_mp->height = clamp_val(pix_mp->height, IMG_MIN_HEIGHT,
> + IMG_MAX_HEIGHT);
> +
> + pix_mp->num_planes = 1;
> +
> + fmtinfo = mtk_cam_format_info_by_fourcc(pix_mp->pixelformat);
> + calc_bpl_size_pix_mp(fmtinfo, pix_mp);
> +
> + /* Constant format fields */
> + pix_mp->colorspace = V4L2_COLORSPACE_SRGB;
> + pix_mp->field = V4L2_FIELD_NONE;
> + pix_mp->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> + pix_mp->quantization = V4L2_QUANTIZATION_DEFAULT;
> + pix_mp->xfer_func = V4L2_XFER_FUNC_DEFAULT;
> +
> + return 0;
> +}
> +
> +static int mtk_cam_vidioc_s_fmt(struct file *file, void *fh,
> + struct v4l2_format *f)
> +{
> + struct mtk_cam_dev *cam = video_drvdata(file);
> + struct mtk_cam_video_device *vdev = file_to_mtk_cam_video_device(file);
> + int ret;
> +
> + if (vb2_is_busy(vdev->vdev.queue)) {
> + dev_dbg(cam->dev, "%s: queue is busy\n", __func__);
> + return -EBUSY;
> + }
> +
> + ret = mtk_cam_vidioc_try_fmt(file, fh, f);
> + if (ret)
> + return ret;
> +
> + /* Configure to video device */
> + vdev->format = f->fmt.pix_mp;
> + vdev->fmtinfo =
> + mtk_cam_format_info_by_fourcc(f->fmt.pix_mp.pixelformat);
> +
> + return 0;
> +}
> +
> +static int mtk_cam_vidioc_enum_framesizes(struct file *file, void *priv,
> + struct v4l2_frmsizeenum *sizes)
> +{
> + struct mtk_cam_video_device *vdev = file_to_mtk_cam_video_device(file);
> +
> + if (sizes->index)
> + return -EINVAL;
> +
> + if (!mtk_cam_dev_find_fmt(vdev->desc, sizes->pixel_format))
> + return -EINVAL;
> +
> + sizes->type = vdev->desc->frmsizes->type;
> + memcpy(&sizes->stepwise, &vdev->desc->frmsizes->stepwise,
> + sizeof(sizes->stepwise));
> +
> + return 0;
> +}
> +
> +static const struct v4l2_ioctl_ops mtk_cam_v4l2_vcap_ioctl_ops = {
> + .vidioc_querycap = mtk_cam_vidioc_querycap,
> + .vidioc_enum_framesizes = mtk_cam_vidioc_enum_framesizes,
> + .vidioc_enum_fmt_vid_cap = mtk_cam_vidioc_enum_fmt,
> + .vidioc_g_fmt_vid_cap_mplane = mtk_cam_vidioc_g_fmt,
> + .vidioc_s_fmt_vid_cap_mplane = mtk_cam_vidioc_s_fmt,
> + .vidioc_try_fmt_vid_cap_mplane = mtk_cam_vidioc_try_fmt,
> + .vidioc_reqbufs = vb2_ioctl_reqbufs,
> + .vidioc_create_bufs = vb2_ioctl_create_bufs,
> + .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
> + .vidioc_querybuf = vb2_ioctl_querybuf,
> + .vidioc_qbuf = vb2_ioctl_qbuf,
> + .vidioc_dqbuf = vb2_ioctl_dqbuf,
> + .vidioc_streamon = vb2_ioctl_streamon,
> + .vidioc_streamoff = vb2_ioctl_streamoff,
> + .vidioc_expbuf = vb2_ioctl_expbuf,
> + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
> + .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
> +};
> +
> +static const struct v4l2_file_operations mtk_cam_v4l2_fops = {
> + .unlocked_ioctl = video_ioctl2,
> + .open = v4l2_fh_open,
> + .release = vb2_fop_release,
> + .poll = vb2_fop_poll,
> + .mmap = vb2_fop_mmap,
> +#ifdef CONFIG_COMPAT
> + .compat_ioctl32 = v4l2_compat_ioctl32,
Do you need this?
> +#endif
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Init & Cleanup
> + */
> +
> +static const u32 stream_out_fmts[] = {
> + /* The 1st entry is the default image format */
> + V4L2_PIX_FMT_SBGGR8,
> + V4L2_PIX_FMT_SGBRG8,
> + V4L2_PIX_FMT_SGRBG8,
> + V4L2_PIX_FMT_SRGGB8,
> + V4L2_PIX_FMT_UYVY,
> + V4L2_PIX_FMT_VYUY,
> + V4L2_PIX_FMT_YUYV,
> + V4L2_PIX_FMT_YVYU,
> +};
> +
> +static const struct mtk_cam_vdev_desc video_stream = {
> + .name = "video stream",
> + .cap = V4L2_CAP_VIDEO_CAPTURE_MPLANE,
> + .buf_type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE,
> + .link_flags = MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED,
> + .fmts = stream_out_fmts,
> + .num_fmts = ARRAY_SIZE(stream_out_fmts),
> + .def_width = 1920,
> + .def_height = 1080,
You have macros for these.
> + .ioctl_ops = &mtk_cam_v4l2_vcap_ioctl_ops,
> + .frmsizes =
> + &(struct v4l2_frmsizeenum){
> + .index = 0,
> + .type = V4L2_FRMSIZE_TYPE_CONTINUOUS,
> + .stepwise = {
> + .max_width = IMG_MAX_WIDTH,
> + .min_width = IMG_MIN_WIDTH,
> + .max_height = IMG_MAX_HEIGHT,
> + .min_height = IMG_MIN_HEIGHT,
> + .step_height = 1,
> + .step_width = 1,
> + },
> + },
> +};
> +
> +int mtk_cam_video_register(struct mtk_cam_dev *cam)
> +{
> + struct device *dev = cam->dev;
> + struct mtk_cam_video_device *cam_vdev = &cam->vdev;
> + struct video_device *vdev = &cam_vdev->vdev;
> + struct vb2_queue *vbq = &cam_vdev->vbq;
> + int ret;
> +
> + vb2_dma_contig_set_max_seg_size(cam->dev, DMA_BIT_MASK(32));
> +
> + cam_vdev->desc = &video_stream;
> +
> + /* Initialize mtk_cam_video_device */
> + mtk_cam_dev_load_default_fmt(cam);
> +
> + cam_vdev->vdev_pad.flags = MEDIA_PAD_FL_SOURCE;
> +
> + /* Initialize media entities */
> + ret = media_entity_pads_init(&vdev->entity, 1, &cam_vdev->vdev_pad);
> + if (ret) {
> + dev_err(dev, "failed to initialize media pad:%d\n", ret);
> + return ret;
> + }
> + cam_vdev->vdev_pad.flags = MEDIA_PAD_FL_SINK;
> +
> + vbq->type = cam_vdev->desc->buf_type;
> + vbq->io_modes = VB2_MMAP | VB2_DMABUF;
> + vbq->dev = dev;
> + vbq->ops = &mtk_cam_vb2_ops;
> + vbq->mem_ops = &vb2_dma_contig_memops;
> + vbq->buf_struct_size = sizeof(struct mtk_cam_dev_buffer);
> + /*
> + * TODO: The hardware supports SOF interrupts, switch to a SOF
> + * timestamp source would give better accuracy, but first requires
> + * extending the V4L2 API to support it.
> + */
> + vbq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC
> + | V4L2_BUF_FLAG_TSTAMP_SRC_EOF;
> +
> + /* No minimum buffers limitation */
> + vbq->min_buffers_needed = 0;
> + vbq->drv_priv = cam;
> +
> + vbq->lock = &cam_vdev->vdev_lock;
> + ret = vb2_queue_init(vbq);
> + if (ret) {
> + dev_err(dev, "failed to init. vb2 queue:%d\n", ret);
> + goto fail_media_clean;
> + }
> +
> + /* Initialize vdev */
> + snprintf(vdev->name, sizeof(vdev->name), "%s %s",
> + dev_name(dev), cam_vdev->desc->name);
> +
> + /* Set cap/type/ioctl_ops of the video device */
> + vdev->device_caps = cam_vdev->desc->cap | V4L2_CAP_STREAMING
> + | V4L2_CAP_IO_MC;
> + vdev->ioctl_ops = cam_vdev->desc->ioctl_ops;
> + vdev->fops = &mtk_cam_v4l2_fops;
> + vdev->release = video_device_release_empty;
> + vdev->lock = &cam_vdev->vdev_lock;
> + vdev->v4l2_dev = cam->subdev.v4l2_dev;
> + vdev->queue = &cam_vdev->vbq;
> + vdev->vfl_dir = VFL_DIR_RX;
> + vdev->entity.function = MEDIA_ENT_F_IO_V4L;
> + vdev->entity.ops = NULL;
This was presumably already NULL.
> + video_set_drvdata(vdev, cam);
> +
> + /* Initialize miscellaneous variables */
> + mutex_init(&cam_vdev->vdev_lock);
> + INIT_LIST_HEAD(&cam->buf_list);
> +
> + ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
> + if (ret) {
> + dev_err(dev, "failed to register vde:%d\n", ret);
> + goto fail_vb2_rel;
> + }
> +
> + /* Create link between the video pad and the subdev pad. */
> + ret = media_create_pad_link(&cam->subdev.entity,
> + MTK_CAM_CIO_PAD_VIDEO,
> + &vdev->entity, 0, cam_vdev->desc->link_flags);
> +
> + if (ret)
> + goto fail_vdev_ureg;
> +
> + return 0;
> +
> +fail_vdev_ureg:
> + video_unregister_device(vdev);
> +fail_vb2_rel:
> + mutex_destroy(&cam_vdev->vdev_lock);
> + vb2_queue_release(vbq);
> +fail_media_clean:
> + media_entity_cleanup(&vdev->entity);
> +
> + return ret;
> +}
> +
> +void mtk_cam_video_unregister(struct mtk_cam_video_device *vdev)
> +{
> + video_unregister_device(&vdev->vdev);
> + vb2_queue_release(&vdev->vbq);
> + media_entity_cleanup(&vdev->vdev.entity);
> + mutex_destroy(&vdev->vdev_lock);
> + vb2_dma_contig_clear_max_seg_size(&vdev->vdev.dev);
> +}
--
Kind regards,
Sakari Ailus
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv
2024-01-10 14:14 ` [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv Julien Stephan
` (4 preceding siblings ...)
2024-02-15 11:55 ` Sakari Ailus
@ 2024-03-18 3:50 ` CK Hu (胡俊光)
2024-03-18 5:18 ` CK Hu (胡俊光)
` (3 subsequent siblings)
9 siblings, 0 replies; 28+ messages in thread
From: CK Hu (胡俊光) @ 2024-03-18 3:50 UTC (permalink / raw)
To: jstephan
Cc: linux-kernel, linux-mediatek, robh+dt, linux-media, devicetree,
paul.elder, mchehab, conor+dt,
Andy Hsieh (謝智皓),
linux-arm-kernel, krzysztof.kozlowski+dt,
Louis Kuo (郭德寧),
laurent.pinchart, fsylvestre, matthias.bgg,
angelogioacchino.delregno, pnguyen
Hi, Julien:
On Wed, 2024-01-10 at 15:14 +0100, Julien Stephan wrote:
>
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> From: Phi-bang Nguyen <pnguyen@baylibre.com>
>
> This driver provides a path to bypass the SoC ISP so that image data
> coming from the SENINF can go directly into memory without any image
> processing. This allows the use of an external ISP.
>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
> [Paul Elder fix irq locking]
> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
> Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
[snip]
> +static void mtk_camsv30_setup(struct mtk_cam_dev *cam_dev, u32 w,
> u32 h,
> + u32 bpl, u32 mbus_fmt)
> +{
> + const struct mtk_cam_conf *conf = cam_dev->conf;
> + u32 int_en = INT_ST_MASK_CAMSV;
> + u32 tmp;
> + struct mtk_cam_sparams sparams;
> +
> + fmt_to_sparams(mbus_fmt, &sparams);
> +
> + if (pm_runtime_resume_and_get(cam_dev->dev) < 0) {
> + dev_err(cam_dev->dev, "failed to get pm_runtime\n");
> + return;
> + }
> +
> + spin_lock_irq(&cam_dev->irqlock);
I think you should setup hardware when hardware is idle. So this
spinlock is redundant.
Regards,
CK
> +
> + writel(conf->tg_sen_mode, cam_dev->regs_tg +
> CAMSV_TG_SEN_MODE);
> +
> + writel((w * sparams.w_factor) << 16U, cam_dev->regs_tg +
> CAMSV_TG_SEN_GRAB_PXL);
> +
> + writel(h << 16U, cam_dev->regs_tg + CAMSV_TG_SEN_GRAB_LIN);
> +
> + /* YUV_U2S_DIS: disable YUV sensor unsigned to signed */
> + writel(0x1000U, cam_dev->regs_tg + CAMSV_TG_PATH_CFG);
> +
> + /* Reset cam */
> + writel(CAMSV_SW_RST, cam_dev->regs + CAMSV_SW_CTL);
> + writel(0x0U, cam_dev->regs + CAMSV_SW_CTL);
> + writel(CAMSV_IMGO_RST_TRIG, cam_dev->regs + CAMSV_SW_CTL);
> +
> + readl_poll_timeout_atomic(cam_dev->regs + CAMSV_SW_CTL, tmp,
> + (tmp == (CAMSV_IMGO_RST_TRIG |
> CAMSV_IMGO_RST_ST)), 10, 200);
> +
> + writel(0x0U, cam_dev->regs + CAMSV_SW_CTL);
> +
> + writel(int_en, cam_dev->regs + CAMSV_INT_EN);
> +
> + writel(conf->module_en | sparams.module_en_pak,
> + cam_dev->regs + CAMSV_MODULE_EN);
> + writel(sparams.fmt_sel, cam_dev->regs + CAMSV_FMT_SEL);
> + writel(sparams.pak, cam_dev->regs + CAMSV_PAK);
> +
> + writel(bpl - 1U, cam_dev->regs_img0 + CAMSV_IMGO_SV_XSIZE);
> + writel(h - 1U, cam_dev->regs_img0 + CAMSV_IMGO_SV_YSIZE);
> +
> + writel(sparams.imgo_stride | bpl, cam_dev->regs_img0 +
> CAMSV_IMGO_SV_STRIDE);
> +
> + writel(conf->imgo_con, cam_dev->regs_img0 + CAMSV_IMGO_SV_CON);
> + writel(conf->imgo_con2, cam_dev->regs_img0 +
> CAMSV_IMGO_SV_CON2);
> +
> + /* CMOS_EN first */
> + writel(readl(cam_dev->regs_tg + CAMSV_TG_SEN_MODE) |
> CAMSV_TG_SEN_MODE_CMOS_EN,
> + cam_dev->regs_tg + CAMSV_TG_SEN_MODE);
> +
> + /* finally, CAMSV_MODULE_EN : IMGO_EN */
> + writel(readl(cam_dev->regs + CAMSV_MODULE_EN) |
> CAMSV_MODULE_EN_IMGO_EN,
> + cam_dev->regs + CAMSV_MODULE_EN);
> +
> + spin_unlock_irq(&cam_dev->irqlock);
> + pm_runtime_put_autosuspend(cam_dev->dev);
> +}
> +
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv
2024-01-10 14:14 ` [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv Julien Stephan
` (5 preceding siblings ...)
2024-03-18 3:50 ` CK Hu (胡俊光)
@ 2024-03-18 5:18 ` CK Hu (胡俊光)
2024-03-18 5:42 ` CK Hu (胡俊光)
` (2 subsequent siblings)
9 siblings, 0 replies; 28+ messages in thread
From: CK Hu (胡俊光) @ 2024-03-18 5:18 UTC (permalink / raw)
To: jstephan
Cc: linux-kernel, linux-mediatek, robh+dt, linux-media, devicetree,
paul.elder, mchehab, conor+dt,
Andy Hsieh (謝智皓),
linux-arm-kernel, krzysztof.kozlowski+dt,
Louis Kuo (郭德寧),
laurent.pinchart, fsylvestre, matthias.bgg,
angelogioacchino.delregno, pnguyen
Hi, Julien:
On Wed, 2024-01-10 at 15:14 +0100, Julien Stephan wrote:
>
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> From: Phi-bang Nguyen <pnguyen@baylibre.com>
>
> This driver provides a path to bypass the SoC ISP so that image data
> coming from the SENINF can go directly into memory without any image
> processing. This allows the use of an external ISP.
>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
> [Paul Elder fix irq locking]
> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
> Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
[snip]
> +
> +struct mtk_cam_format_info {
> + u32 code;
> + u32 fourcc;
> + bool packed;
For all the format defined in mtk_cam_format_info[], packed is true, so
this is redundant. Remove it.
Regards,
CK
> + u8 bpp;
> +};
[snip]
> +/* ---------------------------------------------------------------
> --------------
> + * Format Information
> + */
> +
> +static const struct mtk_cam_format_info mtk_cam_format_info[] = {
> + {
> + .fourcc = V4L2_PIX_FMT_SBGGR8,
> + .code = MEDIA_BUS_FMT_SBGGR8_1X8,
> + .packed = true,
> + .bpp = 8,
> + }, {
> + .fourcc = V4L2_PIX_FMT_SGBRG8,
> + .code = MEDIA_BUS_FMT_SGBRG8_1X8,
> + .packed = true,
> + .bpp = 8,
> + }, {
> + .fourcc = V4L2_PIX_FMT_SGRBG8,
> + .code = MEDIA_BUS_FMT_SGRBG8_1X8,
> + .packed = true,
> + .bpp = 8,
> + }, {
> + .fourcc = V4L2_PIX_FMT_SRGGB8,
> + .code = MEDIA_BUS_FMT_SRGGB8_1X8,
> + .packed = true,
> + .bpp = 8,
> + }, {
> + .fourcc = V4L2_PIX_FMT_YUYV,
> + .code = MEDIA_BUS_FMT_YUYV8_1X16,
> + .packed = true,
> + .bpp = 16,
> + }, {
> + .fourcc = V4L2_PIX_FMT_YVYU,
> + .code = MEDIA_BUS_FMT_YVYU8_1X16,
> + .packed = true,
> + .bpp = 16,
> + }, {
> + .fourcc = V4L2_PIX_FMT_UYVY,
> + .code = MEDIA_BUS_FMT_UYVY8_1X16,
> + .packed = true,
> + .bpp = 16,
> + }, {
> + .fourcc = V4L2_PIX_FMT_VYUY,
> + .code = MEDIA_BUS_FMT_VYUY8_1X16,
> + .packed = true,
> + .bpp = 16,
> + },
> +};
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv
2024-01-10 14:14 ` [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv Julien Stephan
` (6 preceding siblings ...)
2024-03-18 5:18 ` CK Hu (胡俊光)
@ 2024-03-18 5:42 ` CK Hu (胡俊光)
2024-03-19 8:47 ` CK Hu (胡俊光)
2024-03-20 9:36 ` CK Hu (胡俊光)
9 siblings, 0 replies; 28+ messages in thread
From: CK Hu (胡俊光) @ 2024-03-18 5:42 UTC (permalink / raw)
To: jstephan
Cc: linux-kernel, linux-mediatek, robh+dt, linux-media, devicetree,
paul.elder, mchehab, conor+dt,
Andy Hsieh (謝智皓),
linux-arm-kernel, krzysztof.kozlowski+dt,
Louis Kuo (郭德寧),
laurent.pinchart, fsylvestre, matthias.bgg,
angelogioacchino.delregno, pnguyen
Hi, Julien:
On Wed, 2024-01-10 at 15:14 +0100, Julien Stephan wrote:
>
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> From: Phi-bang Nguyen <pnguyen@baylibre.com>
>
> This driver provides a path to bypass the SoC ISP so that image data
> coming from the SENINF can go directly into memory without any image
> processing. This allows the use of an external ISP.
>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
> [Paul Elder fix irq locking]
> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
> Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
[snip]
> +
> +static const struct v4l2_subdev_pad_ops mtk_cam_subdev_pad_ops = {
> + .init_cfg = mtk_cam_init_cfg,
In kernel 6.8, init_cfg has been removed. Please rebase this series
onto latest kernel.
Regards,
CK
> + .enum_mbus_code = mtk_cam_enum_mbus_code,
> + .set_fmt = mtk_cam_set_fmt,
> + .get_fmt = mtk_cam_get_fmt,
> + .link_validate = v4l2_subdev_link_validate_default,
> +};
> +
>
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv
2024-01-10 14:14 ` [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv Julien Stephan
` (7 preceding siblings ...)
2024-03-18 5:42 ` CK Hu (胡俊光)
@ 2024-03-19 8:47 ` CK Hu (胡俊光)
2024-03-20 9:36 ` CK Hu (胡俊光)
9 siblings, 0 replies; 28+ messages in thread
From: CK Hu (胡俊光) @ 2024-03-19 8:47 UTC (permalink / raw)
To: jstephan
Cc: linux-kernel, linux-mediatek, robh+dt, linux-media, devicetree,
paul.elder, mchehab, conor+dt,
Andy Hsieh (謝智皓),
linux-arm-kernel, krzysztof.kozlowski+dt,
Louis Kuo (郭德寧),
laurent.pinchart, fsylvestre, matthias.bgg,
angelogioacchino.delregno, pnguyen
Hi, Julien:
On Wed, 2024-01-10 at 15:14 +0100, Julien Stephan wrote:
>
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> From: Phi-bang Nguyen <pnguyen@baylibre.com>
>
> This driver provides a path to bypass the SoC ISP so that image data
> coming from the SENINF can go directly into memory without any image
> processing. This allows the use of an external ISP.
>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
> [Paul Elder fix irq locking]
> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
> Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
[snip]
> +
> +#define IMG_MAX_WIDTH 5376
> +#define IMG_MAX_HEIGHT 4032
> +#define IMG_DEF_WIDTH 1920
> +#define IMG_DEF_HEIGHT 1080
Why do you define default width/height? Does 1920x1080 have any
benefit? If so, add comment to describe why choose 1920x1080. If no, I
think using IMG_MAX_WIDTH/IMG_MAX_HEIGHT as default is a good choice
because we could drop this redundant definition and let hardware work
in its best quality.
Regards,
CK
> +#define IMG_MIN_WIDTH 80
> +#define IMG_MIN_HEIGHT 60
> +
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 3/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 sensor interface
2024-01-10 14:14 ` [PATCH v4 3/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 sensor interface Julien Stephan
` (2 preceding siblings ...)
2024-02-15 9:21 ` Sakari Ailus
@ 2024-03-20 9:04 ` CK Hu (胡俊光)
3 siblings, 0 replies; 28+ messages in thread
From: CK Hu (胡俊光) @ 2024-03-20 9:04 UTC (permalink / raw)
To: jstephan
Cc: linux-kernel, linux-mediatek, robh+dt, linux-media, devicetree,
paul.elder, mchehab, conor+dt,
Andy Hsieh (謝智皓),
Louis Kuo (郭德寧),
krzysztof.kozlowski+dt, linux-arm-kernel, laurent.pinchart,
fsylvestre, matthias.bgg, angelogioacchino.delregno, pnguyen
Hi, Julien:
On Wed, 2024-01-10 at 15:14 +0100, Julien Stephan wrote:
>
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> From: Louis Kuo <louis.kuo@mediatek.com>
>
> This will add the mediatek ISP3.0 seninf (sensor interface) driver
> found
> on several Mediatek SoCs such as the mt8365.
>
> Then seninf module has 4 physical CSI-2 inputs. Depending on the soc
> they
> may not be all connected.
>
> Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
> Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
[snip]
> +
> +static const struct mtk_seninf_conf seninf_8365_conf = {
> + .model = "mtk-camsys-3.0",
> + .nb_inputs = 4,
> + .nb_muxes = 6,
> + .nb_outputs = 4,
> +};
I think you should directly define these value as symbols because now
only support one SoC.
#define MODEL "mtk-camsys-3.0"
#define INPUT_NR 4
#define MUTEX_NR 6
#define OUTPUT_NR 4
Because we don't know which SoC would be upstream later, maybe the next
SoC would be
static const struct mtk_seninf_conf seninf_83xx_conf = {
.model = "mtk-camsys-3.0",
.nb_inputs = 4,
.nb_muxes = 6,
.nb_outputs = 4,
.support_xxx = true;
};
then model, nb_inputs, nb_muxes, and nb_outputs has no difference, so
it's not necessary to define them as variable. So define them as
constant now, and when next SoC upstream, then we know which one would
be variable.
Regards,
CK
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv
2024-01-10 14:14 ` [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv Julien Stephan
` (8 preceding siblings ...)
2024-03-19 8:47 ` CK Hu (胡俊光)
@ 2024-03-20 9:36 ` CK Hu (胡俊光)
9 siblings, 0 replies; 28+ messages in thread
From: CK Hu (胡俊光) @ 2024-03-20 9:36 UTC (permalink / raw)
To: jstephan
Cc: linux-kernel, linux-mediatek, robh+dt, linux-media, devicetree,
paul.elder, mchehab, conor+dt,
Andy Hsieh (謝智皓),
linux-arm-kernel, krzysztof.kozlowski+dt,
Louis Kuo (郭德寧),
laurent.pinchart, fsylvestre, matthias.bgg,
angelogioacchino.delregno, pnguyen
Hi, Julien:
On Wed, 2024-01-10 at 15:14 +0100, Julien Stephan wrote:
>
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> From: Phi-bang Nguyen <pnguyen@baylibre.com>
>
> This driver provides a path to bypass the SoC ISP so that image data
> coming from the SENINF can go directly into memory without any image
> processing. This allows the use of an external ISP.
>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
> [Paul Elder fix irq locking]
> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
> Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
[snip]
> +
> +static int mtk_cam_vb2_queue_setup(struct vb2_queue *vq,
> + unsigned int *num_buffers,
> + unsigned int *num_planes,
> + unsigned int sizes[],
> + struct device *alloc_devs[])
> +{
> + struct mtk_cam_video_device *vdev =
> + vb2_queue_to_mtk_cam_video_device(vq);
> + unsigned int max_buffer_count = vdev->desc->max_buf_count;
> + const struct v4l2_pix_format_mplane *fmt = &vdev->format;
> + unsigned int size;
> + unsigned int np_conf;
> + unsigned int i;
> +
> + /* Check the limitation of buffer size */
> + if (max_buffer_count)
max_buffer_count is always zero, so this checking is redundant.
Regards,
CK
> + *num_buffers = clamp_val(*num_buffers, 1,
> max_buffer_count);
> +
> + size = fmt->plane_fmt[0].sizeimage;
> + /* Add for q.create_bufs with fmt.g_sizeimage(p) / 2 test */
> +
> + np_conf = 1;
> +
> + if (*num_planes == 0) {
> + *num_planes = np_conf;
> + for (i = 0; i < *num_planes; ++i)
> + sizes[i] = size;
> + } else if (*num_planes != np_conf || sizes[0] < size) {
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
^ permalink raw reply [flat|nested] 28+ messages in thread
end of thread, other threads:[~2024-03-20 9:37 UTC | newest]
Thread overview: 28+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-01-10 14:14 [PATCH v4 0/5] Add Mediatek ISP3.0 Julien Stephan
2024-01-10 14:14 ` [PATCH v4 1/5] dt-bindings: media: add mediatek ISP3.0 sensor interface Julien Stephan
2024-01-11 8:15 ` Laurent Pinchart
2024-01-12 7:32 ` Krzysztof Kozlowski
2024-01-10 14:14 ` [PATCH v4 2/5] dt-bindings: media: add mediatek ISP3.0 camsv Julien Stephan
2024-01-12 7:34 ` Krzysztof Kozlowski
2024-01-12 7:41 ` Laurent Pinchart
2024-01-12 7:49 ` Krzysztof Kozlowski
2024-01-10 14:14 ` [PATCH v4 3/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 sensor interface Julien Stephan
2024-01-11 2:46 ` CK Hu (胡俊光)
2024-01-11 12:04 ` AngeloGioacchino Del Regno
2024-02-12 15:07 ` Julien Stephan
2024-02-15 9:21 ` Sakari Ailus
2024-03-20 9:04 ` CK Hu (胡俊光)
2024-01-10 14:14 ` [PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv Julien Stephan
2024-01-11 12:07 ` AngeloGioacchino Del Regno
2024-01-12 0:58 ` CK Hu (胡俊光)
2024-01-12 1:48 ` CK Hu (胡俊光)
2024-01-12 3:55 ` CK Hu (胡俊光)
2024-02-15 11:55 ` Sakari Ailus
2024-03-18 3:50 ` CK Hu (胡俊光)
2024-03-18 5:18 ` CK Hu (胡俊光)
2024-03-18 5:42 ` CK Hu (胡俊光)
2024-03-19 8:47 ` CK Hu (胡俊光)
2024-03-20 9:36 ` CK Hu (胡俊光)
2024-01-10 14:14 ` [PATCH v4 5/5] arm64: dts: mediatek: mt8365: Add support for camera Julien Stephan
2024-01-11 8:32 ` Laurent Pinchart
2024-01-11 8:08 ` [PATCH v4 0/5] Add Mediatek ISP3.0 Laurent Pinchart
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).