linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Adam Ward <Adam.Ward.opensource@diasemi.com>
To: Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
	Vincent Whitchurch <vincent.whitchurch@axis.com>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	Support Opensource <support.opensource@diasemi.com>
Subject: [PATCH V4 09/10] regulator: da9121: add mode support
Date: Tue, 1 Dec 2020 13:52:35 +0000	[thread overview]
Message-ID: <7844c8f6facb6f7c0649381629cc75ccad14723d.1606830377.git.Adam.Ward.opensource@diasemi.com> (raw)
In-Reply-To: <cover.1606830377.git.Adam.Ward.opensource@diasemi.com>

Adds get/set for mode, and mapping from REGULATOR_MODE_* to select
PFM/PWM/Auto operation.

Signed-off-by: Adam Ward <Adam.Ward.opensource@diasemi.com>
---
 drivers/regulator/da9121-regulator.c | 74 ++++++++++++++++++++++++++++++++++++
 1 file changed, 74 insertions(+)

diff --git a/drivers/regulator/da9121-regulator.c b/drivers/regulator/da9121-regulator.c
index a69acb2..8e50f55 100644
--- a/drivers/regulator/da9121-regulator.c
+++ b/drivers/regulator/da9121-regulator.c
@@ -101,6 +101,11 @@ struct da9121_field {
 	{ DA9xxx_REG_BUCK_BUCK2_2, DA9121_MASK_BUCK_BUCKx_2_CHx_ILIM },
 };
 
+static const struct da9121_field da9121_mode_field[2] = {
+	{ DA9121_REG_BUCK_BUCK1_4, DA9121_MASK_BUCK_BUCKx_4_CHx_A_MODE },
+	{ DA9xxx_REG_BUCK_BUCK2_4, DA9121_MASK_BUCK_BUCKx_4_CHx_A_MODE },
+};
+
 static int da9121_get_current_limit(struct regulator_dev *rdev)
 {
 	struct da9121 *chip = rdev_get_drvdata(rdev);
@@ -202,6 +207,67 @@ static int da9121_set_current_limit(struct regulator_dev *rdev,
 	return ret;
 }
 
+static unsigned int da9121_map_mode(unsigned int mode)
+{
+	switch (mode) {
+	case DA9121_BUCK_MODE_FORCE_PWM:
+		return REGULATOR_MODE_FAST;
+	case DA9121_BUCK_MODE_FORCE_PWM_SHEDDING:
+		return REGULATOR_MODE_NORMAL;
+	case DA9121_BUCK_MODE_AUTO:
+		return REGULATOR_MODE_IDLE;
+	case DA9121_BUCK_MODE_FORCE_PFM:
+		return REGULATOR_MODE_STANDBY;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int da9121_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct da9121 *chip = rdev_get_drvdata(rdev);
+	int id = rdev_get_id(rdev);
+	unsigned int val;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = DA9121_BUCK_MODE_FORCE_PWM;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = DA9121_BUCK_MODE_FORCE_PWM_SHEDDING;
+		break;
+	case REGULATOR_MODE_IDLE:
+		val = DA9121_BUCK_MODE_AUTO;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = DA9121_BUCK_MODE_FORCE_PFM;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(chip->regmap,
+				  da9121_mode_field[id].reg,
+				  da9121_mode_field[id].msk,
+				  val);
+}
+
+static unsigned int da9121_buck_get_mode(struct regulator_dev *rdev)
+{
+	struct da9121 *chip = rdev_get_drvdata(rdev);
+	int id = rdev_get_id(rdev);
+	unsigned int val;
+	int ret = 0;
+
+	ret = regmap_read(chip->regmap, da9121_mode_field[id].reg, &val);
+	if (ret < 0) {
+		dev_err(chip->dev, "Cannot read BUCK register: %d\n", ret);
+		return -EINVAL;
+	}
+
+	return da9121_map_mode(val & da9121_mode_field[id].msk);
+}
+
 static const struct regulator_ops da9121_buck_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
@@ -211,6 +277,8 @@ static int da9121_set_current_limit(struct regulator_dev *rdev,
 	.list_voltage = regulator_list_voltage_linear,
 	.get_current_limit = da9121_get_current_limit,
 	.set_current_limit = da9121_set_current_limit,
+	.set_mode = da9121_buck_set_mode,
+	.get_mode = da9121_buck_get_mode,
 };
 
 static struct of_regulator_match da9121_matches[] = {
@@ -285,6 +353,7 @@ static int da9121_of_parse_cb(struct device_node *np,
 	.of_parse_cb = da9121_of_parse_cb,
 	.owner = THIS_MODULE,
 	.regulators_node = of_match_ptr("regulators"),
+	.of_map_mode = da9121_map_mode,
 	.ops = &da9121_buck_ops,
 	.type = REGULATOR_VOLTAGE,
 	.n_voltages = DA9121_N_VOLTAGES,
@@ -309,6 +378,7 @@ static int da9121_of_parse_cb(struct device_node *np,
 		.of_parse_cb = da9121_of_parse_cb,
 		.owner = THIS_MODULE,
 		.regulators_node = of_match_ptr("regulators"),
+		.of_map_mode = da9121_map_mode,
 		.ops = &da9121_buck_ops,
 		.type = REGULATOR_VOLTAGE,
 		.n_voltages = DA9121_N_VOLTAGES,
@@ -327,6 +397,7 @@ static int da9121_of_parse_cb(struct device_node *np,
 		.of_parse_cb = da9121_of_parse_cb,
 		.owner = THIS_MODULE,
 		.regulators_node = of_match_ptr("regulators"),
+		.of_map_mode = da9121_map_mode,
 		.ops = &da9121_buck_ops,
 		.type = REGULATOR_VOLTAGE,
 		.n_voltages = DA9121_N_VOLTAGES,
@@ -348,6 +419,7 @@ static int da9121_of_parse_cb(struct device_node *np,
 		.of_parse_cb = da9121_of_parse_cb,
 		.owner = THIS_MODULE,
 		.regulators_node = of_match_ptr("regulators"),
+		.of_map_mode = da9121_map_mode,
 		.ops = &da9121_buck_ops,
 		.type = REGULATOR_VOLTAGE,
 		.n_voltages = DA9121_N_VOLTAGES,
@@ -366,6 +438,7 @@ static int da9121_of_parse_cb(struct device_node *np,
 		.of_parse_cb = da9121_of_parse_cb,
 		.owner = THIS_MODULE,
 		.regulators_node = of_match_ptr("regulators"),
+		.of_map_mode = da9121_map_mode,
 		.ops = &da9121_buck_ops,
 		.type = REGULATOR_VOLTAGE,
 		.n_voltages = DA9121_N_VOLTAGES,
@@ -386,6 +459,7 @@ static int da9121_of_parse_cb(struct device_node *np,
 	.of_parse_cb = da9121_of_parse_cb,
 	.owner = THIS_MODULE,
 	.regulators_node = of_match_ptr("regulators"),
+	.of_map_mode = da9121_map_mode,
 	.ops = &da9121_buck_ops,
 	.type = REGULATOR_VOLTAGE,
 	.n_voltages = DA9121_N_VOLTAGES,
-- 
1.9.1


  parent reply	other threads:[~2020-12-01 13:53 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-01 13:52 [PATCH V4 00/10] regulator: da9121: extend support to variants, add features Adam Ward
2020-12-01 13:52 ` [PATCH V4 01/10] regulator: Update DA9121 dt-bindings Adam Ward
2020-12-07 17:58   ` Rob Herring
2020-12-08 10:41     ` Adam Ward
2020-12-01 13:52 ` [PATCH V4 02/10] regulator: da9121: Add header file Adam Ward
2020-12-01 13:52 ` [PATCH V4 03/10] regulator: da9121: Add device variants Adam Ward
2020-12-01 13:52 ` [PATCH V4 04/10] regulator: da9121: Add device variant regmaps Adam Ward
2020-12-01 13:52 ` [PATCH V4 05/10] regulator: da9121: Add device variant descriptors Adam Ward
2020-12-01 13:52 ` [PATCH V4 06/10] regulator: da9121: Add support for device variants via devicetree Adam Ward
2020-12-01 13:52 ` [PATCH V4 07/10] regulator: da9121: Update registration to support multiple buck variants Adam Ward
2020-12-01 13:52 ` [PATCH V4 08/10] regulator: da9121: add current support Adam Ward
2020-12-01 13:52 ` Adam Ward [this message]
2020-12-01 13:52 ` [PATCH V4 10/10] regulator: da9121: add interrupt support Adam Ward
2020-12-01 14:01 ` [PATCH V4 00/10] regulator: da9121: extend support to variants, add features Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7844c8f6facb6f7c0649381629cc75ccad14723d.1606830377.git.Adam.Ward.opensource@diasemi.com \
    --to=adam.ward.opensource@diasemi.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=support.opensource@diasemi.com \
    --cc=vincent.whitchurch@axis.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).