From: Lucas Stach <l.stach@pengutronix.de>
To: lorenzo.pieralisi@arm.com
Cc: linux-pci@vger.kernel.org, linux-imx@nxp.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de,
Richard Zhu <hongxing.zhu@nxp.com>,
andrew.smirnov@gmail.com, shawnguo@kernel.org, kw@linux.com,
bhelgaas@google.com, stefan@agner.ch
Subject: Re: [RESEND v4 1/2] dt-bindings: imx6q-pcie: add one regulator used to power up pcie phy
Date: Thu, 06 May 2021 18:08:24 +0200 [thread overview]
Message-ID: <7900502879b346e18727f956965ace34a146c0f1.camel@pengutronix.de> (raw)
In-Reply-To: <1617091701-6444-2-git-send-email-hongxing.zhu@nxp.com>
Hi Lorenzo,
have those two patches fallen through some crack? AFAICS they are gone
from patchwork, but I also can't find them in any branch in the usual
git repos.
Regards,
Lucas
Am Dienstag, dem 30.03.2021 um 16:08 +0800 schrieb Richard Zhu:
> Both 1.8v and 3.3v power supplies can be used by i.MX8MQ PCIe PHY.
> In default, the PCIE_VPH voltage is suggested to be 1.8v refer to data
> sheet. When PCIE_VPH is supplied by 3.3v in the HW schematic design,
> the VREG_BYPASS bits of GPR registers should be cleared from default
> value 1b'1 to 1b'0. Thus, the internal 3v3 to 1v8 translator would be
> turned on.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
> ---
> Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> index de4b2baf91e8..d8971ab99274 100644
> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> @@ -38,6 +38,9 @@ Optional properties:
> The regulator will be enabled when initializing the PCIe host and
> disabled either as part of the init process or when shutting down the
> host.
> +- vph-supply: Should specify the regulator in charge of VPH one of the three
> + PCIe PHY powers. This regulator can be supplied by both 1.8v and 3.3v voltage
> + supplies.
>
>
> Additional required properties for imx6sx-pcie:
> - clock names: Must include the following additional entries:
next prev parent reply other threads:[~2021-05-06 16:08 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-30 8:08 [RESEND v4 0/2] add one regulator used to power up pcie phy Richard Zhu
2021-03-30 8:08 ` [RESEND v4 1/2] dt-bindings: imx6q-pcie: " Richard Zhu
2021-05-06 16:08 ` Lucas Stach [this message]
2021-05-06 21:01 ` Bjorn Helgaas
2021-05-14 8:35 ` [EXT] " Richard Zhu
2021-03-30 8:08 ` [RESEND v4 2/2] PCI: imx: clear vreg bypass when pcie vph voltage is 3v3 Richard Zhu
2021-05-06 21:09 ` Bjorn Helgaas
2021-05-14 8:36 ` [EXT] " Richard Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7900502879b346e18727f956965ace34a146c0f1.camel@pengutronix.de \
--to=l.stach@pengutronix.de \
--cc=andrew.smirnov@gmail.com \
--cc=bhelgaas@google.com \
--cc=hongxing.zhu@nxp.com \
--cc=kernel@pengutronix.de \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=shawnguo@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).