Re: [PATCH v4 01/14] dmaengine: tegra-apb: Fix use-after-free

[Jon Hunter <jonathanh@nvidia.com>]

On 29/01/2020 00:12, Dmitry Osipenko wrote:
> 28.01.2020 17:51, Dmitry Osipenko пишет:
>> 28.01.2020 17:02, Jon Hunter пишет:
>>>
>>> On 16/01/2020 20:10, Dmitry Osipenko wrote:
>>>> 15.01.2020 12:00, Jon Hunter пишет:
>>>>>
>>>>> On 14/01/2020 20:33, Dmitry Osipenko wrote:
>>>>>> 14.01.2020 18:09, Jon Hunter пишет:
>>>>>>>
>>>>>>> On 12/01/2020 17:29, Dmitry Osipenko wrote:
>>>>>>>> I was doing some experiments with I2C and noticed that Tegra APB DMA
>>>>>>>> driver crashes sometime after I2C DMA transfer termination. The crash
>>>>>>>> happens because tegra_dma_terminate_all() bails out immediately if pending
>>>>>>>> list is empty, thus it doesn't release the half-completed descriptors
>>>>>>>> which are getting re-used before ISR tasklet kicks-in.
>>>>>>>
>>>>>>> Can you elaborate a bit more on how these are getting re-used? What is
>>>>>>> the sequence of events which results in the panic? I believe that this
>>>>>>> was also reported in the past [0] and so I don't doubt there is an issue
>>>>>>> here, but would like to completely understand this.
>>>>>>>
>>>>>>> Thanks!
>>>>>>> Jon
>>>>>>>
>>>>>>> [0] https://lore.kernel.org/patchwork/patch/675349/
>>>>>>>
>>>>>>
>>>>>> In my case it happens in the touchscreen driver during of the
>>>>>> touchscreen's interrupt handling (in a threaded IRQ handler) + CPU is
>>>>>> under load and there is other interrupts activity. So what happens here
>>>>>> is that the TS driver issues one I2C transfer, which fails with
>>>>>> (apparently bogus) timeout (because DMA descriptor is completed and
>>>>>> removed from the pending list, but tasklet not executed yet), and then
>>>>>> TS immediately issues another I2C transfer that re-uses the
>>>>>> yet-incompleted descriptor. That's my understanding.
>>>>>
>>>>> OK, but what is the exact sequence that it allowing it to re-use the
>>>>> incompleted descriptor?
>>>>
>>>>    TDMA driver                      DMA Client
>>>>
>>>> 1.
>>>>                                     dmaengine_prep()
>>>>
>>>> 2.
>>>>    tegra_dma_desc_get()
>>>>    dma_desc = kzalloc()
>>>>    ...
>>>>    tegra_dma_prep_slave_sg()
>>>>    INIT_LIST_HEAD(&dma_desc->tx_list);
>>>>    INIT_LIST_HEAD(&dma_desc->cb_node);
>>>>    list_add_tail(sgreq->node,
>>>>                  dma_desc->tx_list)
>>>>
>>>> 3.
>>>>                                     dma_async_issue_pending()
>>>>
>>>> 4.
>>>>    tegra_dma_tx_submit()
>>>>    list_splice_tail_init(dma_desc->tx_list,
>>>>                          tdc->pending_sg_req)
>>>>
>>>> 5.
>>>>    tegra_dma_isr()
>>>>    ...
>>>>    handle_once_dma_done()
>>>>    ...
>>>>    sgreq = list_first_entry(tdc->pending_sg_req)
>>>>    list_del(sgreq->node);
>>>>    ...
>>>>    list_add_tail(dma_desc->cb_node,
>>>>                  tdc->cb_desc);
>>>>    list_add_tail(dma_desc->node,
>>>>                  tdc->free_dma_desc);
>>>
>>> Isn't this the problem here, that we have placed this on the free list
>>> before we are actually done?
>>>
>>> It seems to me that there could still be a potential race condition
>>> between the ISR and the tasklet running.
>>
>> Yes, this should be addressed by the patch #3 "dmaengine: tegra-apb:
>> Prevent race conditions of tasklet vs free list".
> 
> correction (to avoid confusion): it's actually patch #5, my bad

Ah OK great! Could be worth making that patch #1 or #2 in the series as
theses are somewhat related.

Cheers
Jon

-- 
nvpublic