[PATCH 4.4 00/93] 4.4.24-stable review

[PATCH 4.4 00/93] 4.4.24-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.4.24 release.
There are 93 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat Oct  8 07:47:15 UTC 2016.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.24-rc1.gz
or in the git tree and branch at:
  git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.4.24-rc1

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Add the top speaker pin config for HP Spectre x360

Hui Wang <hui.wang@canonical.com>
    ALSA: hda - Fix headset mic detection problem for several Dell laptops

Prarit Bhargava <prarit@redhat.com>
    ACPICA: acpi_get_sleep_type_data: Reduce warnings

Hui Wang <hui.wang@canonical.com>
    ALSA: hda - Adding one more ALC255 pin definition for headset problem

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "usbtmc: convert to devm_kzalloc"

Kyle Jones <kyle@kf5jwc.us>
    USB: serial: cp210x: Add ID for a Juniper console

Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
    Staging: fbtft: Fix bug in fbtft-core

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    usb: misc: legousbtower: Fix NULL pointer deference

Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com>
    USB: serial: cp210x: fix hardware flow-control disable

Mikulas Patocka <mpatocka@redhat.com>
    dm log writes: fix bug with too large bios

Loc Ho <lho@apm.com>
    clk: xgene: Add missing parenthesis when clearing divider value

Jann Horn <jann@thejh.net>
    aio: mark AIO pseudo-fs noexec

Marek Lindner <mareklindner@neomailbox.ch>
    batman-adv: remove unused callback from batadv_algo_ops struct

Jack Morgenstein <jackm@dev.mellanox.co.il>
    IB/mlx4: Use correct subnet-prefix in QP1 mads under SR-IOV

Jack Morgenstein <jackm@dev.mellanox.co.il>
    IB/mlx4: Fix code indentation in QP1 MAD flow

Alex Vesker <valex@mellanox.com>
    IB/mlx4: Fix incorrect MC join state bit-masking on SR-IOV

Alex Vesker <valex@mellanox.com>
    IB/ipoib: Don't allow MC joins during light MC flush

Erez Shitrit <erezsh@mellanox.com>
    IB/core: Fix use after free in send_leave function

Erez Shitrit <erezsh@mellanox.com>
    IB/ipoib: Fix memory corruption in ipoib cm mode connect flow

Radim Krčmář <rkrcmar@redhat.com>
    KVM: nVMX: postpone VMCS changes on MSR_IA32_APICBASE write

Wei Yongjun <weiyj.lk@gmail.com>
    dmaengine: at_xdmac: fix to pass correct device identity to free_irq()

Michal Hocko <mhocko@suse.com>
    kernel/fork: fix CLONE_CHILD_CLEARTID regression in nscd

Peter Ujfalusi <peter.ujfalusi@ti.com>
    ASoC: omap-mcpdm: Fix irq resource handling

Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
    sysctl: handle error writing UINT_MAX to u32 fields

Michael Ellerman <mpe@ellerman.id.au>
    powerpc/prom: Fix sub-processor option passed to ibm, client-architecture-support

Florian Fainelli <f.fainelli@gmail.com>
    brcmsmac: Initialize power in brcms_c_stf_ss_algo_channel_get()

Florian Fainelli <f.fainelli@gmail.com>
    brcmsmac: Free packet if dma_mapping_error() fails in dma_rxfill

Florian Fainelli <f.fainelli@gmail.com>
    brcmfmac: Fix glob_skb leak in brcmf_sdiod_recv_chain

Wei Yongjun <weiyj.lk@gmail.com>
    ASoC: Intel: Skylake: Fix error return code in skl_probe()

Trond Myklebust <trond.myklebust@primarydata.com>
    pNFS/flexfiles: Fix layoutcommit after a commit to DS

Trond Myklebust <trond.myklebust@primarydata.com>
    pNFS/files: Fix layoutcommit after a commit to DS

Chuck Lever <chuck.lever@oracle.com>
    NFS: Don't drop CB requests with invalid principals

Chuck Lever <chuck.lever@oracle.com>
    svc: Avoid garbage replies when pc_func() returns rpc_drop_reply

Alexandre Belloni <alexandre.belloni@free-electrons.com>
    dmaengine: at_xdmac: fix debug string

Dan Carpenter <dan.carpenter@oracle.com>
    fnic: pci_dma_mapping_error() doesn't return an error code

Dan Carpenter <dan.carpenter@oracle.com>
    avr32: off by one in at32_init_pio()

Sven Eckelmann <sven@narfation.org>
    ath9k: Fix programming of minCCA power threshold

Arnd Bergmann <arnd@arndb.de>
    gspca: avoid unused variable warnings

Dan Carpenter <dan.carpenter@oracle.com>
    em28xx-i2c: rt_mutex_trylock() returns zero on failure

Geert Uytterhoeven <geert@linux-m68k.org>
    NFC: fdp: Detect errors from fdp_nci_create_conn()

striebit <shaul.triebitz@intel.com>
    iwlmvm: mvm: set correct state in smart-fifo configuration

James Hogan <james.hogan@imgtec.com>
    tile: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO

Geliang Tang <geliangtang@163.com>
    pstore: drop file opened reference count

Omar Sandoval <osandov@fb.com>
    blk-mq: actually hook up defer list when running requests

Nishanth Menon <nm@ti.com>
    hwrng: omap - Fix assumption that runtime_get_sync will always succeed

Russell King <rmk+kernel@armlinux.org.uk>
    ARM: sa1111: fix pcmcia suspend/resume

Wolfram Sang <wsa+renesas@sang-engineering.com>
    ARM: shmobile: fix regulator quirk for Gen2

Russell King <rmk+kernel@armlinux.org.uk>
    ARM: sa1100: clear reset status prior to reboot

Russell King <rmk+kernel@armlinux.org.uk>
    ARM: sa1100: fix 3.6864MHz clock

Russell King <rmk+kernel@armlinux.org.uk>
    ARM: sa1100: register clocks early

Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
    ARM: sun5i: Fix typo in trip point temperature

Stephen Boyd <sboyd@codeaurora.org>
    regulator: qcom_smd: Fix voltage ranges for pm8x41

Stephen Boyd <stephen.boyd@linaro.org>
    regulator: qcom_spmi: Update mvs1/mvs2 switches on pm8941

Stephen Boyd <stephen.boyd@linaro.org>
    regulator: qcom_spmi: Add support for get_mode/set_mode on switches

Stephen Boyd <stephen.boyd@linaro.org>
    regulator: qcom_spmi: Add support for S4 supply on pm8941

apronin@chromium.org <apronin@chromium.org>
    tpm: fix byte-order for the value read by tpm2_get_tpm_pt

Nicolas Iooss <nicolas.iooss_linux@m4x.org>
    printk: fix parsing of "brl=" option

Marcin Nowakowski <marcin.nowakowski@imgtec.com>
    MIPS: uprobes: fix use of uninitialised variable

Paul Burton <paul.burton@imgtec.com>
    MIPS: Malta: Fix IOCU disable switch read for MIPS64

Marcin Nowakowski <marcin.nowakowski@imgtec.com>
    MIPS: fix uretprobe implementation

Marcin Nowakowski <marcin.nowakowski@imgtec.com>
    MIPS: uprobes: remove incorrect set_orig_insn

Will Deacon <will.deacon@arm.com>
    arm64: debug: avoid resetting stepping state machine when TIF_SINGLESTEP

Srinivas Ramana <sramana@codeaurora.org>
    ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7

James Morse <james.morse@arm.com>
    irqchip/gicv3: Silence noisy DEBUG_PER_CPU_MAPS warning

Russell King <rmk+kernel@armlinux.org.uk>
    gpio: sa1100: fix irq probing for ucb1x00

Dan Carpenter <dan.carpenter@oracle.com>
    usb: gadget: fsl_qe_udc: signedness bug in qe_get_frame()

Yan, Zheng <zyan@redhat.com>
    ceph: fix race during filling readdir cache

Emmanuel Grumbach <emmanuel.grumbach@intel.com>
    iwlwifi: mvm: don't use ret when not initialised

Sara Sharon <sara.sharon@intel.com>
    iwlwifi: pcie: fix access to scratch buffer

Geert Uytterhoeven <geert+renesas@glider.be>
    spi: sh-msiof: Avoid invalid clock generator parameters

Michael Walle <michael@walle.cc>
    hwmon: (adt7411) set bit 3 in CFG1 register

Guenter Roeck <linux@roeck-us.net>
    nvmem: Declare nvmem_cell_read() consistently

Quentin Armitage <quentin@armitage.org.uk>
    ipvs: fix bind to link-local mcast IPv6 address in backup

Dan Carpenter <dan.carpenter@oracle.com>
    tools/vm/slabinfo: fix an unintentional printf

Robert Jarzmik <robert.jarzmik@free.fr>
    mmc: pxamci: fix potential oops

Stefan Wahren <stefan.wahren@i2se.com>
    drivers/perf: arm_pmu: Fix leak in error path

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    pinctrl: Flag strict is a field in struct pinmux_ops

Masahiro Yamada <yamada.masahiro@socionext.com>
    pinctrl: uniphier: fix .pin_dbg_show() callback

Heinrich Schuchardt <xypron.glpk@gmx.de>
    i40e: avoid null pointer dereference

Mark Rutland <mark.rutland@arm.com>
    perf/core: Fix pmu::filter_match for SW-led groups

Johannes Berg <johannes.berg@intel.com>
    iwlwifi: mvm: fix a few firmware capability checks

Cristian Birsan <cristian.birsan@microchip.com>
    usb: musb: fix DMA for host mode

Cristian Birsan <cristian.birsan@microchip.com>
    usb: musb: Fix DMA desired mode for Mentor DMA engine

Roger Quadros <rogerq@ti.com>
    ARM: 8617/1: dma: fix dma_max_pfn()

Robin Murphy <robin.murphy@arm.com>
    ARM: 8616/1: dt: Respect property size when parsing CPUs

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon/si/dpm: add workaround for for Jet parts

Ilia Mirkin <imirkin@alum.mit.edu>
    drm/nouveau/fifo/nv04: avoid ramht race against cookie insertion

Andy Lutomirski <luto@kernel.org>
    x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID

Andy Lutomirski <luto@kernel.org>
    x86/init: Fix cr4_init_shadow() on CR4-less machines

Sergei Miroshnichenko <sergeimir@emcraft.com>
    can: dev: fix deadlock reported after bus-off

zhong jiang <zhongjiang@huawei.com>
    mm,ksm: fix endless looping in allocating memory when ksm enable

Karl Beldan <kbeldan@baylibre.com>
    mtd: nand: davinci: Reinitialize the HW ECC engine in 4bit hwctl

Joonwoo Park <joonwoop@codeaurora.org>
    cpuset: handle race between CPU hotplug and cpuset_hotplug_work


-------------

Diffstat:

 .../bindings/regulator/qcom,spmi-regulator.txt     |  6 +--
 Documentation/pinctrl.txt                          |  2 +-
 Makefile                                           |  4 +-
 arch/arm/boot/compressed/head.S                    |  2 +-
 arch/arm/boot/dts/sun5i-a13.dtsi                   |  2 +-
 arch/arm/common/sa1111.c                           | 22 ++++----
 arch/arm/include/asm/dma-mapping.h                 |  2 +-
 arch/arm/kernel/devtree.c                          | 14 +++--
 arch/arm/mach-sa1100/clock.c                       |  5 +-
 arch/arm/mach-sa1100/generic.c                     |  4 ++
 arch/arm/mach-sa1100/generic.h                     |  2 +
 arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c | 62 +++++++++-------------
 arch/arm64/kernel/debug-monitors.c                 |  6 ++-
 arch/avr32/mach-at32ap/pio.c                       |  2 +-
 arch/mips/include/asm/uprobes.h                    |  1 -
 arch/mips/kernel/uprobes.c                         | 25 ++-------
 arch/mips/mti-malta/malta-setup.c                  |  8 ++-
 arch/powerpc/kernel/prom_init.c                    |  9 ++--
 arch/tile/include/asm/elf.h                        |  1 +
 arch/tile/include/uapi/asm/auxvec.h                |  2 +
 arch/x86/include/asm/tlbflush.h                    |  2 +-
 arch/x86/kernel/cpu/common.c                       | 23 ++++----
 arch/x86/kvm/vmx.c                                 | 13 +++++
 block/blk-mq.c                                     |  2 +-
 drivers/acpi/acpica/hwxface.c                      | 24 ++++++---
 drivers/char/hw_random/omap-rng.c                  | 16 +++++-
 drivers/char/tpm/tpm2-cmd.c                        |  2 +-
 drivers/clk/clk-xgene.c                            |  4 +-
 drivers/dma/at_xdmac.c                             |  8 +--
 drivers/gpio/gpio-sa1100.c                         |  2 +-
 drivers/gpu/drm/nouveau/nvkm/engine/fifo/dmanv04.c |  3 ++
 drivers/gpu/drm/radeon/si_dpm.c                    |  6 +++
 drivers/hwmon/adt7411.c                            |  5 +-
 drivers/infiniband/core/multicast.c                | 13 +----
 drivers/infiniband/hw/mlx4/mad.c                   | 23 ++++++++
 drivers/infiniband/hw/mlx4/mcg.c                   | 14 ++---
 drivers/infiniband/hw/mlx4/mlx4_ib.h               |  2 +-
 drivers/infiniband/hw/mlx4/qp.c                    | 37 +++++++------
 drivers/infiniband/ulp/ipoib/ipoib.h               |  1 +
 drivers/infiniband/ulp/ipoib/ipoib_cm.c            | 16 ++++++
 drivers/infiniband/ulp/ipoib/ipoib_ib.c            |  9 ++++
 drivers/infiniband/ulp/ipoib/ipoib_main.c          |  2 +-
 drivers/irqchip/irq-gic-v3.c                       |  7 +--
 drivers/md/dm-log-writes.c                         |  4 +-
 drivers/media/usb/em28xx/em28xx-i2c.c              |  5 +-
 drivers/media/usb/gspca/cpia1.c                    |  2 +-
 drivers/media/usb/gspca/konica.c                   |  2 +-
 drivers/media/usb/gspca/t613.c                     |  2 +-
 drivers/mmc/host/pxamci.c                          | 16 +++---
 drivers/mtd/nand/davinci_nand.c                    |  3 ++
 drivers/net/can/dev.c                              | 27 ++++++----
 drivers/net/ethernet/intel/i40e/i40e_common.c      |  4 +-
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c     |  2 +-
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c   |  4 +-
 drivers/net/wireless/brcm80211/brcmsmac/dma.c      |  4 +-
 drivers/net/wireless/brcm80211/brcmsmac/stf.c      |  2 +-
 drivers/net/wireless/iwlwifi/mvm/fw.c              |  3 +-
 drivers/net/wireless/iwlwifi/mvm/mac80211.c        |  8 +--
 drivers/net/wireless/iwlwifi/mvm/sf.c              |  2 +-
 drivers/net/wireless/iwlwifi/pcie/tx.c             |  4 +-
 drivers/nfc/fdp/fdp.c                              |  4 +-
 drivers/perf/arm_pmu.c                             |  1 +
 drivers/pinctrl/uniphier/pinctrl-uniphier-core.c   |  6 +++
 drivers/regulator/qcom_smd-regulator.c             | 17 +++---
 drivers/regulator/qcom_spmi-regulator.c            |  7 ++-
 drivers/scsi/fnic/fnic_fcs.c                       |  8 +--
 drivers/spi/spi-sh-msiof.c                         |  3 ++
 drivers/staging/fbtft/fbtft-core.c                 |  4 +-
 drivers/usb/class/usbtmc.c                         |  3 +-
 drivers/usb/gadget/udc/fsl_qe_udc.c                |  7 +--
 drivers/usb/misc/legousbtower.c                    | 35 ++++++------
 drivers/usb/musb/musb_host.c                       |  8 ++-
 drivers/usb/serial/cp210x.c                        |  3 +-
 fs/aio.c                                           |  7 ++-
 fs/ceph/inode.c                                    |  9 +++-
 fs/nfs/callback_xdr.c                              |  6 ++-
 fs/nfs/filelayout/filelayout.c                     |  3 +-
 fs/nfs/flexfilelayout/flexfilelayout.c             |  3 +-
 fs/pstore/inode.c                                  |  1 -
 include/linux/can/dev.h                            |  3 +-
 include/linux/nvmem-consumer.h                     |  2 +-
 include/linux/sysctl.h                             |  2 +
 kernel/cpuset.c                                    | 17 ++++--
 kernel/events/core.c                               | 23 +++++++-
 kernel/fork.c                                      | 10 ++--
 kernel/printk/braille.c                            |  4 +-
 kernel/sysctl.c                                    | 45 +++++++++++++++-
 mm/ksm.c                                           |  3 +-
 net/batman-adv/originator.c                        |  6 ---
 net/batman-adv/types.h                             |  3 --
 net/netfilter/ipvs/ip_vs_sync.c                    |  6 ++-
 net/sunrpc/svc.c                                   |  8 ++-
 sound/pci/hda/patch_conexant.c                     | 10 ++++
 sound/pci/hda/patch_realtek.c                      | 17 ++++++
 sound/soc/intel/skylake/skl.c                      |  4 +-
 sound/soc/omap/omap-mcpdm.c                        |  5 +-
 tools/vm/slabinfo.c                                |  3 +-
 97 files changed, 526 insertions(+), 289 deletions(-)

[PATCH 4.4 01/93] cpuset: handle race between CPU hotplug and cpuset_hotplug_work

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joonwoo Park <joonwoop@codeaurora.org>

commit 28b89b9e6f7b6c8fef7b3af39828722bca20cfee upstream.

A discrepancy between cpu_online_mask and cpuset's effective_cpus
mask is inevitable during hotplug since cpuset defers updating of
effective_cpus mask using a workqueue, during which time nothing
prevents the system from more hotplug operations.  For that reason
guarantee_online_cpus() walks up the cpuset hierarchy until it finds
an intersection under the assumption that top cpuset's effective_cpus
mask intersects with cpu_online_mask even with such a race occurring.

However a sequence of CPU hotplugs can open a time window, during which
none of the effective CPUs in the top cpuset intersect with
cpu_online_mask.

For example when there are 4 possible CPUs 0-3 and only CPU0 is online:

  ========================  ===========================
   cpu_online_mask           top_cpuset.effective_cpus
  ========================  ===========================
   echo 1 > cpu2/online.
   CPU hotplug notifier woke up hotplug work but not yet scheduled.
      [0,2]                     [0]

   echo 0 > cpu0/online.
   The workqueue is still runnable.
      [2]                       [0]
  ========================  ===========================

  Now there is no intersection between cpu_online_mask and
  top_cpuset.effective_cpus.  Thus invoking sys_sched_setaffinity() at
  this moment can cause following:

   Unable to handle kernel NULL pointer dereference at virtual address 000000d0
   ------------[ cut here ]------------
   Kernel BUG at ffffffc0001389b0 [verbose debug info unavailable]
   Internal error: Oops - BUG: 96000005 [#1] PREEMPT SMP
   Modules linked in:
   CPU: 2 PID: 1420 Comm: taskset Tainted: G        W       4.4.8+ #98
   task: ffffffc06a5c4880 ti: ffffffc06e124000 task.ti: ffffffc06e124000
   PC is at guarantee_online_cpus+0x2c/0x58
   LR is at cpuset_cpus_allowed+0x4c/0x6c
   <snip>
   Process taskset (pid: 1420, stack limit = 0xffffffc06e124020)
   Call trace:
   [<ffffffc0001389b0>] guarantee_online_cpus+0x2c/0x58
   [<ffffffc00013b208>] cpuset_cpus_allowed+0x4c/0x6c
   [<ffffffc0000d61f0>] sched_setaffinity+0xc0/0x1ac
   [<ffffffc0000d6374>] SyS_sched_setaffinity+0x98/0xac
   [<ffffffc000085cb0>] el0_svc_naked+0x24/0x28

The top cpuset's effective_cpus are guaranteed to be identical to
cpu_online_mask eventually.  Hence fall back to cpu_online_mask when
there is no intersection between top cpuset's effective_cpus and
cpu_online_mask.

Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: cgroups@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/cpuset.c |   17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -324,8 +324,7 @@ static struct file_system_type cpuset_fs
 /*
  * Return in pmask the portion of a cpusets's cpus_allowed that
  * are online.  If none are online, walk up the cpuset hierarchy
- * until we find one that does have some online cpus.  The top
- * cpuset always has some cpus online.
+ * until we find one that does have some online cpus.
  *
  * One way or another, we guarantee to return some non-empty subset
  * of cpu_online_mask.
@@ -334,8 +333,20 @@ static struct file_system_type cpuset_fs
  */
 static void guarantee_online_cpus(struct cpuset *cs, struct cpumask *pmask)
 {
-	while (!cpumask_intersects(cs->effective_cpus, cpu_online_mask))
+	while (!cpumask_intersects(cs->effective_cpus, cpu_online_mask)) {
 		cs = parent_cs(cs);
+		if (unlikely(!cs)) {
+			/*
+			 * The top cpuset doesn't have any online cpu as a
+			 * consequence of a race between cpuset_hotplug_work
+			 * and cpu hotplug notifier.  But we know the top
+			 * cpuset's effective_cpus is on its way to to be
+			 * identical to cpu_online_mask.
+			 */
+			cpumask_copy(pmask, cpu_online_mask);
+			return;
+		}
+	}
 	cpumask_and(pmask, cs->effective_cpus, cpu_online_mask);
 }
 

[PATCH 4.4 02/93] mtd: nand: davinci: Reinitialize the HW ECC engine in 4bit hwctl

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Karl Beldan <kbeldan@baylibre.com>

commit f6d7c1b5598b6407c3f1da795dd54acf99c1990c upstream.

This fixes subpage writes when using 4-bit HW ECC.

There has been numerous reports about ECC errors with devices using this
driver for a while.  Also the 4-bit ECC has been reported as broken with
subpages in [1] and with 16 bits NANDs in the driver and in mach* board
files both in mainline and in the vendor BSPs.

What I saw with 4-bit ECC on a 16bits NAND (on an LCDK) which got me to
try reinitializing the ECC engine:
- R/W on whole pages properly generates/checks RS code
- try writing the 1st subpage only of a blank page, the subpage is well
  written and the RS code properly generated, re-reading the same page
  the HW detects some ECC error, reading the same page again no ECC
  error is detected

Note that the ECC engine is already reinitialized in the 1-bit case.

Tested on my LCDK with UBI+UBIFS using subpages.
This could potentially get rid of the issue workarounded in [1].

[1] 28c015a9daab ("mtd: davinci-nand: disable subpage write for keystone-nand")

Fixes: 6a4123e581b3 ("mtd: nand: davinci_nand, 4-bit ECC for smallpage")
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/davinci_nand.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -241,6 +241,9 @@ static void nand_davinci_hwctl_4bit(stru
 	unsigned long flags;
 	u32 val;
 
+	/* Reset ECC hardware */
+	davinci_nand_readl(info, NAND_4BIT_ECC1_OFFSET);
+
 	spin_lock_irqsave(&davinci_nand_lock, flags);
 
 	/* Start 4-bit ECC calculation for read/write */

[PATCH 4.4 03/93] mm,ksm: fix endless looping in allocating memory when ksm enable

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: zhong jiang <zhongjiang@huawei.com>

commit 5b398e416e880159fe55eefd93c6588fa072cd66 upstream.

I hit the following hung task when runing a OOM LTP test case with 4.1
kernel.

Call trace:
[<ffffffc000086a88>] __switch_to+0x74/0x8c
[<ffffffc000a1bae0>] __schedule+0x23c/0x7bc
[<ffffffc000a1c09c>] schedule+0x3c/0x94
[<ffffffc000a1eb84>] rwsem_down_write_failed+0x214/0x350
[<ffffffc000a1e32c>] down_write+0x64/0x80
[<ffffffc00021f794>] __ksm_exit+0x90/0x19c
[<ffffffc0000be650>] mmput+0x118/0x11c
[<ffffffc0000c3ec4>] do_exit+0x2dc/0xa74
[<ffffffc0000c46f8>] do_group_exit+0x4c/0xe4
[<ffffffc0000d0f34>] get_signal+0x444/0x5e0
[<ffffffc000089fcc>] do_signal+0x1d8/0x450
[<ffffffc00008a35c>] do_notify_resume+0x70/0x78

The oom victim cannot terminate because it needs to take mmap_sem for
write while the lock is held by ksmd for read which loops in the page
allocator

ksm_do_scan
	scan_get_next_rmap_item
		down_read
		get_next_rmap_item
			alloc_rmap_item   #ksmd will loop permanently.

There is no way forward because the oom victim cannot release any memory
in 4.1 based kernel.  Since 4.6 we have the oom reaper which would solve
this problem because it would release the memory asynchronously.
Nevertheless we can relax alloc_rmap_item requirements and use
__GFP_NORETRY because the allocation failure is acceptable as ksm_do_scan
would just retry later after the lock got dropped.

Such a patch would be also easy to backport to older stable kernels which
do not have oom_reaper.

While we are at it add GFP_NOWARN so the admin doesn't have to be alarmed
by the allocation failure.

Link: http://lkml.kernel.org/r/1474165570-44398-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Suggested-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/ksm.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -283,7 +283,8 @@ static inline struct rmap_item *alloc_rm
 {
 	struct rmap_item *rmap_item;
 
-	rmap_item = kmem_cache_zalloc(rmap_item_cache, GFP_KERNEL);
+	rmap_item = kmem_cache_zalloc(rmap_item_cache, GFP_KERNEL |
+						__GFP_NORETRY | __GFP_NOWARN);
 	if (rmap_item)
 		ksm_rmap_items++;
 	return rmap_item;

[PATCH 4.4 04/93] can: dev: fix deadlock reported after bus-off

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sergei Miroshnichenko <sergeimir@emcraft.com>

commit 9abefcb1aaa58b9d5aa40a8bb12c87d02415e4c8 upstream.

A timer was used to restart after the bus-off state, leading to a
relatively large can_restart() executed in an interrupt context,
which in turn sets up pinctrl. When this happens during system boot,
there is a high probability of grabbing the pinctrl_list_mutex,
which is locked already by the probe() of other device, making the
kernel suspect a deadlock condition [1].

To resolve this issue, the restart_timer is replaced by a delayed
work.

[1] https://github.com/victronenergy/venus/issues/24

Signed-off-by: Sergei Miroshnichenko <sergeimir@emcraft.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/dev.c   |   27 +++++++++++++++++----------
 include/linux/can/dev.h |    3 ++-
 2 files changed, 19 insertions(+), 11 deletions(-)

--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -21,6 +21,7 @@
 #include <linux/slab.h>
 #include <linux/netdevice.h>
 #include <linux/if_arp.h>
+#include <linux/workqueue.h>
 #include <linux/can.h>
 #include <linux/can/dev.h>
 #include <linux/can/skb.h>
@@ -471,9 +472,8 @@ EXPORT_SYMBOL_GPL(can_free_echo_skb);
 /*
  * CAN device restart for bus-off recovery
  */
-static void can_restart(unsigned long data)
+static void can_restart(struct net_device *dev)
 {
-	struct net_device *dev = (struct net_device *)data;
 	struct can_priv *priv = netdev_priv(dev);
 	struct net_device_stats *stats = &dev->stats;
 	struct sk_buff *skb;
@@ -513,6 +513,14 @@ restart:
 		netdev_err(dev, "Error %d during restart", err);
 }
 
+static void can_restart_work(struct work_struct *work)
+{
+	struct delayed_work *dwork = to_delayed_work(work);
+	struct can_priv *priv = container_of(dwork, struct can_priv, restart_work);
+
+	can_restart(priv->dev);
+}
+
 int can_restart_now(struct net_device *dev)
 {
 	struct can_priv *priv = netdev_priv(dev);
@@ -526,8 +534,8 @@ int can_restart_now(struct net_device *d
 	if (priv->state != CAN_STATE_BUS_OFF)
 		return -EBUSY;
 
-	/* Runs as soon as possible in the timer context */
-	mod_timer(&priv->restart_timer, jiffies);
+	cancel_delayed_work_sync(&priv->restart_work);
+	can_restart(dev);
 
 	return 0;
 }
@@ -548,8 +556,8 @@ void can_bus_off(struct net_device *dev)
 	netif_carrier_off(dev);
 
 	if (priv->restart_ms)
-		mod_timer(&priv->restart_timer,
-			  jiffies + (priv->restart_ms * HZ) / 1000);
+		schedule_delayed_work(&priv->restart_work,
+				      msecs_to_jiffies(priv->restart_ms));
 }
 EXPORT_SYMBOL_GPL(can_bus_off);
 
@@ -658,6 +666,7 @@ struct net_device *alloc_candev(int size
 		return NULL;
 
 	priv = netdev_priv(dev);
+	priv->dev = dev;
 
 	if (echo_skb_max) {
 		priv->echo_skb_max = echo_skb_max;
@@ -667,7 +676,7 @@ struct net_device *alloc_candev(int size
 
 	priv->state = CAN_STATE_STOPPED;
 
-	init_timer(&priv->restart_timer);
+	INIT_DELAYED_WORK(&priv->restart_work, can_restart_work);
 
 	return dev;
 }
@@ -748,8 +757,6 @@ int open_candev(struct net_device *dev)
 	if (!netif_carrier_ok(dev))
 		netif_carrier_on(dev);
 
-	setup_timer(&priv->restart_timer, can_restart, (unsigned long)dev);
-
 	return 0;
 }
 EXPORT_SYMBOL_GPL(open_candev);
@@ -764,7 +771,7 @@ void close_candev(struct net_device *dev
 {
 	struct can_priv *priv = netdev_priv(dev);
 
-	del_timer_sync(&priv->restart_timer);
+	cancel_delayed_work_sync(&priv->restart_work);
 	can_flush_echo_skb(dev);
 }
 EXPORT_SYMBOL_GPL(close_candev);
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -32,6 +32,7 @@ enum can_mode {
  * CAN common private data
  */
 struct can_priv {
+	struct net_device *dev;
 	struct can_device_stats can_stats;
 
 	struct can_bittiming bittiming, data_bittiming;
@@ -47,7 +48,7 @@ struct can_priv {
 	u32 ctrlmode_static;	/* static enabled options for driver/hardware */
 
 	int restart_ms;
-	struct timer_list restart_timer;
+	struct delayed_work restart_work;
 
 	int (*do_set_bittiming)(struct net_device *dev);
 	int (*do_set_data_bittiming)(struct net_device *dev);

[PATCH 4.4 05/93] x86/init: Fix cr4_init_shadow() on CR4-less machines

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit e1bfc11c5a6f40222a698a818dc269113245820e upstream.

cr4_init_shadow() will panic on 486-like machines without CR4.  Fix
it using __read_cr4_safe().

Reported-by: david@saggiorato.net
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 1e02ce4cccdc ("x86: Store a per-cpu shadow copy of CR4")
Link: http://lkml.kernel.org/r/43a20f81fb504013bf613913dc25574b45336a61.1475091074.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/tlbflush.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -32,7 +32,7 @@ DECLARE_PER_CPU_SHARED_ALIGNED(struct tl
 /* Initialize cr4 shadow for this CPU. */
 static inline void cr4_init_shadow(void)
 {
-	this_cpu_write(cpu_tlbstate.cr4, __read_cr4());
+	this_cpu_write(cpu_tlbstate.cr4, __read_cr4_safe());
 }
 
 /* Set in this cpu's CR4. */

[PATCH 4.4 06/93] x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we dont have CPUID

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit 05fb3c199bb09f5b85de56cc3ede194ac95c5e1f upstream.

Otherwise arch_task_struct_size == 0 and we die.  While we're at it,
set X86_FEATURE_ALWAYS, too.

Reported-by: David Saggiorato <david@saggiorato.net>
Tested-by: David Saggiorato <david@saggiorato.net>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: aaeb5c01c5b ("x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86")
Link: http://lkml.kernel.org/r/8de723afbf0811071185039f9088733188b606c9.1475103911.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/common.c |   29 ++++++++++++++---------------
 1 file changed, 14 insertions(+), 15 deletions(-)

--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -737,21 +737,20 @@ static void __init early_identify_cpu(st
 		identify_cpu_without_cpuid(c);
 
 	/* cyrix could have cpuid enabled via c_identify()*/
-	if (!have_cpuid_p())
-		return;
-
-	cpu_detect(c);
-	get_cpu_vendor(c);
-	get_cpu_cap(c);
-
-	if (this_cpu->c_early_init)
-		this_cpu->c_early_init(c);
-
-	c->cpu_index = 0;
-	filter_cpuid_features(c, false);
-
-	if (this_cpu->c_bsp_init)
-		this_cpu->c_bsp_init(c);
+	if (have_cpuid_p()) {
+		cpu_detect(c);
+		get_cpu_vendor(c);
+		get_cpu_cap(c);
+
+		if (this_cpu->c_early_init)
+			this_cpu->c_early_init(c);
+
+		c->cpu_index = 0;
+		filter_cpuid_features(c, false);
+
+		if (this_cpu->c_bsp_init)
+			this_cpu->c_bsp_init(c);
+	}
 
 	setup_force_cpu_cap(X86_FEATURE_ALWAYS);
 	fpu__init_system(c);

[PATCH 4.4 07/93] drm/nouveau/fifo/nv04: avoid ramht race against cookie insertion

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ilia Mirkin <imirkin@alum.mit.edu>

commit 666ca3d8f19082f40745d75f3cc7cc0200ee87e3 upstream.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/nouveau/nvkm/engine/fifo/dmanv04.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/dmanv04.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/dmanv04.c
@@ -36,7 +36,10 @@ nv04_fifo_dma_object_dtor(struct nvkm_fi
 {
 	struct nv04_fifo_chan *chan = nv04_fifo_chan(base);
 	struct nvkm_instmem *imem = chan->fifo->base.engine.subdev.device->imem;
+
+	mutex_lock(&chan->fifo->base.engine.subdev.mutex);
 	nvkm_ramht_remove(imem->ramht, cookie);
+	mutex_unlock(&chan->fifo->base.engine.subdev.mutex);
 }
 
 static int

[PATCH 4.4 08/93] drm/radeon/si/dpm: add workaround for for Jet parts

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 670bb4fd21c966d0d2a59ad4a99bb4889f9a2987 upstream.

Add clock quirks for Jet parts.

Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Tested-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/si_dpm.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/gpu/drm/radeon/si_dpm.c
+++ b/drivers/gpu/drm/radeon/si_dpm.c
@@ -3015,6 +3015,12 @@ static void si_apply_state_adjust_rules(
 	if (rdev->pdev->device == 0x6811 &&
 	    rdev->pdev->revision == 0x81)
 		max_mclk = 120000;
+	/* limit sclk/mclk on Jet parts for stability */
+	if (rdev->pdev->device == 0x6665 &&
+	    rdev->pdev->revision == 0xc3) {
+		max_sclk = 75000;
+		max_mclk = 80000;
+	}
 
 	if (rps->vce_active) {
 		rps->evclk = rdev->pm.dpm.vce_states[rdev->pm.dpm.vce_level].evclk;

[PATCH 4.4 09/93] ARM: 8616/1: dt: Respect property size when parsing CPUs

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Robin Murphy <robin.murphy@arm.com>

commit ba6dea4f7cedb4b1c17e36f4087675d817c2e24b upstream.

Whilst MPIDR values themselves are less than 32 bits, it is still
perfectly valid for a DT to have #address-cells > 1 in the CPUs node,
resulting in the "reg" property having leading zero cell(s). In that
situation, the big-endian nature of the data conspires with the current
behaviour of only reading the first cell to cause the kernel to think
all CPUs have ID 0, and become resoundingly unhappy as a consequence.

Take the full property length into account when parsing CPUs so as to
be correct under any circumstances.

Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/kernel/devtree.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -87,6 +87,8 @@ void __init arm_dt_init_cpu_maps(void)
 		return;
 
 	for_each_child_of_node(cpus, cpu) {
+		const __be32 *cell;
+		int prop_bytes;
 		u32 hwid;
 
 		if (of_node_cmp(cpu->type, "cpu"))
@@ -98,7 +100,8 @@ void __init arm_dt_init_cpu_maps(void)
 		 * properties is considered invalid to build the
 		 * cpu_logical_map.
 		 */
-		if (of_property_read_u32(cpu, "reg", &hwid)) {
+		cell = of_get_property(cpu, "reg", &prop_bytes);
+		if (!cell || prop_bytes < sizeof(*cell)) {
 			pr_debug(" * %s missing reg property\n",
 				     cpu->full_name);
 			of_node_put(cpu);
@@ -106,10 +109,15 @@ void __init arm_dt_init_cpu_maps(void)
 		}
 
 		/*
-		 * 8 MSBs must be set to 0 in the DT since the reg property
+		 * Bits n:24 must be set to 0 in the DT since the reg property
 		 * defines the MPIDR[23:0].
 		 */
-		if (hwid & ~MPIDR_HWID_BITMASK) {
+		do {
+			hwid = be32_to_cpu(*cell++);
+			prop_bytes -= sizeof(*cell);
+		} while (!hwid && prop_bytes > 0);
+
+		if (prop_bytes || (hwid & ~MPIDR_HWID_BITMASK)) {
 			of_node_put(cpu);
 			return;
 		}

[PATCH 4.4 10/93] ARM: 8617/1: dma: fix dma_max_pfn()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roger Quadros <rogerq@ti.com>

commit d248220f0465b818887baa9829e691fe662b2c5e upstream.

Since commit 6ce0d2001692 ("ARM: dma: Use dma_pfn_offset for dma address translation"),
dma_to_pfn() already returns the PFN with the physical memory start offset
so we don't need to add it again.

This fixes USB mass storage lock-up problem on systems that can't do DMA
over the entire physical memory range (e.g.) Keystone 2 systems with 4GB RAM
can only do DMA over the first 2GB. [K2E-EVM].

What happens there is that without this patch SCSI layer sets a wrong
bounce buffer limit in scsi_calculate_bounce_limit() for the USB mass
storage device. dma_max_pfn() evaluates to 0x8fffff and bounce_limit
is set to 0x8fffff000 whereas maximum DMA'ble physical memory on Keystone 2
is 0x87fffffff. This results in non DMA'ble pages being given to the
USB controller and hence the lock-up.

NOTE: in the above case, USB-SCSI-device's dma_pfn_offset was showing as 0.
This should have really been 0x780000 as on K2e, LOWMEM_START is 0x80000000
and HIGHMEM_START is 0x800000000. DMA zone is 2GB so dma_max_pfn should be
0x87ffff. The incorrect dma_pfn_offset for the USB storage device is because
USB devices are not correctly inheriting the dma_pfn_offset from the
USB host controller. This will be fixed by a separate patch.

Fixes: 6ce0d2001692 ("ARM: dma: Use dma_pfn_offset for dma address translation")
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/include/asm/dma-mapping.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -119,7 +119,7 @@ static inline dma_addr_t virt_to_dma(str
 /* The ARM override for dma_max_pfn() */
 static inline unsigned long dma_max_pfn(struct device *dev)
 {
-	return PHYS_PFN_OFFSET + dma_to_pfn(dev, *dev->dma_mask);
+	return dma_to_pfn(dev, *dev->dma_mask);
 }
 #define dma_max_pfn(dev) dma_max_pfn(dev)
 

[PATCH 4.4 11/93] usb: musb: Fix DMA desired mode for Mentor DMA engine

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cristian Birsan <cristian.birsan@microchip.com>

commit bba40e6948b94cba71965285fbac31bd078c024a upstream.

Commit 754fe4a92c07 ("usb: musb: Remove ifdefs for TX DMA for musb_host.c")
introduces a problem setting the desired channel mode for the Mentor DMA
engine.

There is a case where an address is incorrectly assigned to the DMA
channel desired mode when it should instead be assigned the actual mode
value. This results in the value of channel->desired_mode not being
correct.

Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Cc: Adam Ford <aford173@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/musb/musb_host.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -661,7 +661,7 @@ static int musb_tx_dma_set_mode_mentor(s
 		csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE);
 		csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */
 	}
-	channel->desired_mode = mode;
+	channel->desired_mode = *mode;
 	musb_writew(epio, MUSB_TXCSR, csr);
 
 	return 0;

[PATCH 4.4 12/93] usb: musb: fix DMA for host mode

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cristian Birsan <cristian.birsan@microchip.com>

commit 4c2ba0c67394514f3f75c660c9f5d02e66a7efd4 upstream.

Commit ac33cdb16681 ("usb: musb: Remove ifdefs for musb_host_rx in
musb_host.c part5") introduces a problem setting DMA host mode.

The musb_advance_schedule() is called immediately after receiving an
endpoint RX interrupt without waiting for the DMA transfer to complete.

As a consequence when the dma complete interrupt arrives the in_qh
member of hw_ep is already null an the musb_host_rx() exits on !urb
error case. Fix the done condition that advances the musb schedule.

Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Adam Ford <aford173@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/musb/musb_host.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2008,10 +2008,8 @@ void musb_host_rx(struct musb *musb, u8
 				qh->offset,
 				urb->transfer_buffer_length);
 
-			done = musb_rx_dma_in_inventra_cppi41(c, hw_ep, qh,
-							      urb, xfer_len,
-							      iso_err);
-			if (done)
+			if (musb_rx_dma_in_inventra_cppi41(c, hw_ep, qh, urb,
+							   xfer_len, iso_err))
 				goto finish;
 			else
 				dev_err(musb->controller, "error: rx_dma failed\n");

[PATCH 4.4 13/93] iwlwifi: mvm: fix a few firmware capability checks

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

commit 280a3efa82fccc9532c968a77e5162cb9f0af497 upstream.

My cleanup in "iwlwifi: prepare for higher API/CAPA bits" accidentally
inverted a few tests - fix them.

Fixes: 859d914c8f5c ("iwlwifi: prepare for higher API/CAPA bits")
Reported-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -3992,8 +3992,8 @@ static int iwl_mvm_mac_get_survey(struct
 	if (idx != 0)
 		return -ENOENT;
 
-	if (fw_has_capa(&mvm->fw->ucode_capa,
-			IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS))
+	if (!fw_has_capa(&mvm->fw->ucode_capa,
+			 IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS))
 		return -ENOENT;
 
 	mutex_lock(&mvm->mutex);
@@ -4039,8 +4039,8 @@ static void iwl_mvm_mac_sta_statistics(s
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
 
-	if (fw_has_capa(&mvm->fw->ucode_capa,
-			IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS))
+	if (!fw_has_capa(&mvm->fw->ucode_capa,
+			 IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS))
 		return;
 
 	/* if beacon filtering isn't on mac80211 does it anyway */

[PATCH 4.4 14/93] perf/core: Fix pmu::filter_match for SW-led groups

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Rutland <mark.rutland@arm.com>

commit 2c81a6477081966fe80b8c6daa68459bca896774 upstream.

The following commit:

  66eb579e66ec ("perf: allow for PMU-specific event filtering")

added the pmu::filter_match() callback. This was intended to
avoid HW constraints on events from resulting in extremely
pessimistic scheduling.

However, pmu::filter_match() is only called for the leader of each event
group. When the leader is a SW event, we do not filter the groups, and
may fail at pmu::add() time, and when this happens we'll give up on
scheduling any event groups later in the list until they are rotated
ahead of the failing group.

This can result in extremely sub-optimal event scheduling behaviour,
e.g. if running the following on a big.LITTLE platform:

$ taskset -c 0 ./perf stat \
 -e 'a57{context-switches,armv8_cortex_a57/config=0x11/}' \
 -e 'a53{context-switches,armv8_cortex_a53/config=0x11/}' \
 ls

     <not counted>      context-switches                                              (0.00%)
     <not counted>      armv8_cortex_a57/config=0x11/                                 (0.00%)
                24      context-switches                                              (37.36%)
          57589154      armv8_cortex_a53/config=0x11/                                 (37.36%)

Here the 'a53' event group was always eligible to be scheduled, but
the 'a57' group never eligible to be scheduled, as the task was always
affine to a Cortex-A53 CPU. The SW (group leader) event in the 'a57'
group was eligible, but the HW event failed at pmu::add() time,
resulting in ctx_flexible_sched_in giving up on scheduling further
groups with HW events.

One way of avoiding this is to check pmu::filter_match() on siblings
as well as the group leader. If any of these fail their
pmu::filter_match() call, we must skip the entire group before
attempting to add any events.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: 66eb579e66ec ("perf: allow for PMU-specific event filtering")
Link: http://lkml.kernel.org/r/1465917041-15339-1-git-send-email-mark.rutland@arm.com
[ Small readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/events/core.c |   23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -1539,12 +1539,33 @@ static int __init perf_workqueue_init(vo
 
 core_initcall(perf_workqueue_init);
 
-static inline int pmu_filter_match(struct perf_event *event)
+static inline int __pmu_filter_match(struct perf_event *event)
 {
 	struct pmu *pmu = event->pmu;
 	return pmu->filter_match ? pmu->filter_match(event) : 1;
 }
 
+/*
+ * Check whether we should attempt to schedule an event group based on
+ * PMU-specific filtering. An event group can consist of HW and SW events,
+ * potentially with a SW leader, so we must check all the filters, to
+ * determine whether a group is schedulable:
+ */
+static inline int pmu_filter_match(struct perf_event *event)
+{
+	struct perf_event *child;
+
+	if (!__pmu_filter_match(event))
+		return 0;
+
+	list_for_each_entry(child, &event->sibling_list, group_entry) {
+		if (!__pmu_filter_match(child))
+			return 0;
+	}
+
+	return 1;
+}
+
 static inline int
 event_filter_match(struct perf_event *event)
 {

[PATCH 4.4 15/93] i40e: avoid null pointer dereference

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heinrich Schuchardt <xypron.glpk@gmx.de>

commit cd956722167ba4fdba9c1ce3eed251b04ea2e10f upstream.

In function i40e_debug_aq parameter desc is assumed to be
possibly NULL. Do not dereference it before checking the
value.

Fixes: f905dd62be88 ("i40e/i40evf: add max buf len to aq debug print helper")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/intel/i40e/i40e_common.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -302,13 +302,15 @@ void i40e_debug_aq(struct i40e_hw *hw, e
 		   void *buffer, u16 buf_len)
 {
 	struct i40e_aq_desc *aq_desc = (struct i40e_aq_desc *)desc;
-	u16 len = le16_to_cpu(aq_desc->datalen);
+	u16 len;
 	u8 *buf = (u8 *)buffer;
 	u16 i = 0;
 
 	if ((!(mask & hw->debug_mask)) || (desc == NULL))
 		return;
 
+	len = le16_to_cpu(aq_desc->datalen);
+
 	i40e_debug(hw, mask,
 		   "AQ CMD: opcode 0x%04X, flags 0x%04X, datalen 0x%04X, retval 0x%04X\n",
 		   le16_to_cpu(aq_desc->opcode),

[PATCH 4.4 16/93] pinctrl: uniphier: fix .pin_dbg_show() callback

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Masahiro Yamada <yamada.masahiro@socionext.com>

commit 10ef8277ec658bf6619da9b3fd65c2db7353c2a4 upstream.

Without this, reading the "pins" in the debugfs causes kernel BUG.

Fixes: 6e9088920258 ("pinctrl: UniPhier: add UniPhier pinctrl core support")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pinctrl/uniphier/pinctrl-uniphier-core.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c
+++ b/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c
@@ -73,6 +73,12 @@ static void uniphier_pctl_pin_dbg_show(s
 	case UNIPHIER_PIN_PULL_DOWN:
 		pull_dir = "DOWN";
 		break;
+	case UNIPHIER_PIN_PULL_UP_FIXED:
+		pull_dir = "UP(FIXED)";
+		break;
+	case UNIPHIER_PIN_PULL_DOWN_FIXED:
+		pull_dir = "DOWN(FIXED)";
+		break;
 	case UNIPHIER_PIN_PULL_NONE:
 		pull_dir = "NONE";
 		break;

[PATCH 4.4 17/93] pinctrl: Flag strict is a field in struct pinmux_ops

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

commit 7440926ed9623dceca3310c5f437d06c859dc02b upstream.

Documentation incorrectly refers to struct pinctrl_desc, where no such flag is
available. Replace the name of the struct.

Fixes: commit 8c4c2016345f ("pinctrl: move strict option to pinmux_ops")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/pinctrl.txt |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Documentation/pinctrl.txt
+++ b/Documentation/pinctrl.txt
@@ -831,7 +831,7 @@ separate memory range only intended for
 range dealing with pin config and pin multiplexing get placed into a
 different memory range and a separate section of the data sheet.
 
-A flag "strict" in struct pinctrl_desc is available to check and deny
+A flag "strict" in struct pinmux_ops is available to check and deny
 simultaneous access to the same pin from GPIO and pin multiplexing
 consumers on hardware of this type. The pinctrl driver should set this flag
 accordingly.

[PATCH 4.4 18/93] drivers/perf: arm_pmu: Fix leak in error path

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Wahren <stefan.wahren@i2se.com>

commit 753246840d012ae34ea80a1d40bc1546c62fb957 upstream.

In case of a IRQ type mismatch in of_pmu_irq_cfg() the
device node for interrupt affinity isn't freed. So fix this
issue by calling of_node_put().

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: fa8ad7889d83 ("arm: perf: factor arm_pmu core out to drivers")
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/perf/arm_pmu.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -815,6 +815,7 @@ static int of_pmu_irq_cfg(struct arm_pmu
 			if (i > 0 && spi != using_spi) {
 				pr_err("PPI/SPI IRQ type mismatch for %s!\n",
 					dn->name);
+				of_node_put(dn);
 				kfree(irqs);
 				return -EINVAL;
 			}

[PATCH 4.4 19/93] mmc: pxamci: fix potential oops

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Robert Jarzmik <robert.jarzmik@free.fr>

commit b3802db5eb72d2a96f4aa4ff0abb937033df2acf upstream.

As reported by Dan in his report in [1], there is a potential NULL
pointer derefence if these conditions are met :
 - there is no platform_data provided, ie. host->pdata = NULL

Fix this by only using the platform data ro_invert when a gpio for
read-only is provided by the platform data.

This doesn't appear yet as every pxa board provides a platform_data, and
calls pxa_set_mci_info() with a non NULL pointer.

[1] [bug report] mmc: pxamci: fix card detect with slot-gpio API.
The commit fd546ee6a7dc ("mmc: pxamci: fix card detect with slot-gpio
API") from Sep 26, 2015, leads to the following static checker warning:

	drivers/mmc/host/pxamci.c:809 pxamci_probe()
	warn: variable dereferenced before check 'host->pdata' (see line 798)

Fixes: fd546ee6a7dc ("mmc: pxamci: fix card detect with slot-gpio API")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/pxamci.c |   16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -798,14 +798,16 @@ static int pxamci_probe(struct platform_
 		gpio_direction_output(gpio_power,
 				      host->pdata->gpio_power_invert);
 	}
-	if (gpio_is_valid(gpio_ro))
+	if (gpio_is_valid(gpio_ro)) {
 		ret = mmc_gpio_request_ro(mmc, gpio_ro);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_ro);
-		goto out;
-	} else {
-		mmc->caps2 |= host->pdata->gpio_card_ro_invert ?
-			0 : MMC_CAP2_RO_ACTIVE_HIGH;
+		if (ret) {
+			dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n",
+				gpio_ro);
+			goto out;
+		} else {
+			mmc->caps2 |= host->pdata->gpio_card_ro_invert ?
+				0 : MMC_CAP2_RO_ACTIVE_HIGH;
+		}
 	}
 
 	if (gpio_is_valid(gpio_cd))

[PATCH 4.4 20/93] tools/vm/slabinfo: fix an unintentional printf

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 2d6a4d64812bb12dda53704943b61a7496d02098 upstream.

The curly braces are missing here so we print stuff unintentionally.

Fixes: 9da4714a2d44 ('slub: slabinfo update for cmpxchg handling')
Link: http://lkml.kernel.org/r/20160715211243.GE19522@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/vm/slabinfo.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/tools/vm/slabinfo.c
+++ b/tools/vm/slabinfo.c
@@ -510,10 +510,11 @@ static void slab_stats(struct slabinfo *
 			s->alloc_node_mismatch, (s->alloc_node_mismatch * 100) / total);
 	}
 
-	if (s->cmpxchg_double_fail || s->cmpxchg_double_cpu_fail)
+	if (s->cmpxchg_double_fail || s->cmpxchg_double_cpu_fail) {
 		printf("\nCmpxchg_double Looping\n------------------------\n");
 		printf("Locked Cmpxchg Double redos   %lu\nUnlocked Cmpxchg Double redos %lu\n",
 			s->cmpxchg_double_fail, s->cmpxchg_double_cpu_fail);
+	}
 }
 
 static void report(struct slabinfo *s)

[PATCH 4.4 21/93] ipvs: fix bind to link-local mcast IPv6 address in backup

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Quentin Armitage <quentin@armitage.org.uk>

commit 3777ed688fba82d0bd43f9fc1ebbc6abe788576d upstream.

When using HEAD from
https://git.kernel.org/cgit/utils/kernel/ipvsadm/ipvsadm.git/,
the command:
ipvsadm --start-daemon backup --mcast-interface eth0.60 \
    --mcast-group ff02::1:81
fails with the error message:
Argument list too long

whereas both:
ipvsadm --start-daemon master --mcast-interface eth0.60 \
    --mcast-group ff02::1:81
and:
ipvsadm --start-daemon backup --mcast-interface eth0.60 \
    --mcast-group 224.0.0.81
are successful.

The error message "Argument list too long" isn't helpful. The error occurs
because an IPv6 address is given in backup mode.

The error is in make_receive_sock() in net/netfilter/ipvs/ip_vs_sync.c,
since it fails to set the interface on the address or the socket before
calling inet6_bind() (via sock->ops->bind), where the test
'if (!sk->sk_bound_dev_if)' failed.

Setting sock->sk->sk_bound_dev_if on the socket before calling
inet6_bind() resolves the issue.

Fixes: d33288172e72 ("ipvs: add more mcast parameters for the sync daemon")
Signed-off-by: Quentin Armitage <quentin@armitage.org.uk>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/ipvs/ip_vs_sync.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -1545,7 +1545,8 @@ error:
 /*
  *      Set up receiving multicast socket over UDP
  */
-static struct socket *make_receive_sock(struct netns_ipvs *ipvs, int id)
+static struct socket *make_receive_sock(struct netns_ipvs *ipvs, int id,
+					int ifindex)
 {
 	/* multicast addr */
 	union ipvs_sockaddr mcast_addr;
@@ -1566,6 +1567,7 @@ static struct socket *make_receive_sock(
 		set_sock_size(sock->sk, 0, result);
 
 	get_mcast_sockaddr(&mcast_addr, &salen, &ipvs->bcfg, id);
+	sock->sk->sk_bound_dev_if = ifindex;
 	result = sock->ops->bind(sock, (struct sockaddr *)&mcast_addr, salen);
 	if (result < 0) {
 		pr_err("Error binding to the multicast addr\n");
@@ -1868,7 +1870,7 @@ int start_sync_thread(struct netns_ipvs
 		if (state == IP_VS_STATE_MASTER)
 			sock = make_send_sock(ipvs, id);
 		else
-			sock = make_receive_sock(ipvs, id);
+			sock = make_receive_sock(ipvs, id, dev->ifindex);
 		if (IS_ERR(sock)) {
 			result = PTR_ERR(sock);
 			goto outtinfo;

[PATCH 4.4 22/93] nvmem: Declare nvmem_cell_read() consistently

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <linux@roeck-us.net>

commit a6c50912508d80164a5e607993b617be85a46d73 upstream.

nvmem_cell_read() is declared as void * if CONFIG_NVMEM is enabled, and
as char * otherwise. This can result in a build warning if CONFIG_NVMEM
is not enabled and a caller asigns the result to a type other than char *
without using a typecast. Use a consistent declaration to avoid the
problem.

Fixes: e2a5402ec7c6 ("nvmem: Add nvmem_device based consumer apis.")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/nvmem-consumer.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/linux/nvmem-consumer.h
+++ b/include/linux/nvmem-consumer.h
@@ -74,7 +74,7 @@ static inline void nvmem_cell_put(struct
 {
 }
 
-static inline char *nvmem_cell_read(struct nvmem_cell *cell, size_t *len)
+static inline void *nvmem_cell_read(struct nvmem_cell *cell, size_t *len)
 {
 	return ERR_PTR(-ENOSYS);
 }

[PATCH 4.4 23/93] hwmon: (adt7411) set bit 3 in CFG1 register

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Walle <michael@walle.cc>

commit b53893aae441a034bf4dbbad42fe218561d7d81f upstream.

According to the datasheet you should only write 1 to this bit. If it is
not set, at least AIN3 will return bad values on newer silicon revisions.

Fixes: d84ca5b345c2 ("hwmon: Add driver for ADT7411 voltage and temperature sensor")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hwmon/adt7411.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/hwmon/adt7411.c
+++ b/drivers/hwmon/adt7411.c
@@ -30,6 +30,7 @@
 
 #define ADT7411_REG_CFG1			0x18
 #define ADT7411_CFG1_START_MONITOR		(1 << 0)
+#define ADT7411_CFG1_RESERVED_BIT3		(1 << 3)
 
 #define ADT7411_REG_CFG2			0x19
 #define ADT7411_CFG2_DISABLE_AVG		(1 << 5)
@@ -296,8 +297,10 @@ static int adt7411_probe(struct i2c_clie
 	mutex_init(&data->device_lock);
 	mutex_init(&data->update_lock);
 
+	/* According to the datasheet, we must only write 1 to bit 3 */
 	ret = adt7411_modify_bit(client, ADT7411_REG_CFG1,
-				 ADT7411_CFG1_START_MONITOR, 1);
+				 ADT7411_CFG1_RESERVED_BIT3
+				 | ADT7411_CFG1_START_MONITOR, 1);
 	if (ret < 0)
 		return ret;
 

[PATCH 4.4 24/93] spi: sh-msiof: Avoid invalid clock generator parameters

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <geert+renesas@glider.be>

commit c3ccf357c3d75bd2924e049b6a991f7c0c111068 upstream.

The conversion from a look-up table to a calculation for clock generator
parameters forgot to take into account that BRDV x 1/1 is valid only if
BRPS is x 1/1 or x 1/2, leading to undefined behavior (e.g. arbitrary
clock rates).

This limitation is documented for the MSIOF module in all supported
SH/R-Mobile and R-Car Gen2/Gen3 ARM SoCs.

Tested on r8a7791/koelsch and r8a7795/salvator-x.

Fixes: 65d5665bb260b034 ("spi: sh-msiof: Update calculation of frequency dividing")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi-sh-msiof.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -263,6 +263,9 @@ static void sh_msiof_spi_set_clk_regs(st
 
 	for (k = 0; k < ARRAY_SIZE(sh_msiof_spi_div_table); k++) {
 		brps = DIV_ROUND_UP(div, sh_msiof_spi_div_table[k].div);
+		/* SCR_BRDV_DIV_1 is valid only if BRPS is x 1/1 or x 1/2 */
+		if (sh_msiof_spi_div_table[k].div == 1 && brps > 2)
+			continue;
 		if (brps <= 32) /* max of brdv is 32 */
 			break;
 	}

[PATCH 4.4 25/93] iwlwifi: pcie: fix access to scratch buffer

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sara Sharon <sara.sharon@intel.com>

commit d5d0689aefc59c6a5352ca25d7e6d47d03f543ce upstream.

This fixes a pretty ancient bug that hasn't manifested itself
until now.
The scratchbuf for command queue is allocated only for 32 slots
but is accessed with the queue write pointer - which can be
up to 256.
Since the scratch buf size was 16 and there are up to 256 TFDs
we never passed a page boundary when accessing the scratch buffer,
but when attempting to increase the size of the scratch buffer a
panic was quick to follow when trying to access the address resulted
in a page boundary.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Fixes: 38c0f334b359 ("iwlwifi: use coherent DMA memory for command header")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/iwlwifi/pcie/tx.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -1508,9 +1508,9 @@ static int iwl_pcie_enqueue_hcmd(struct
 
 	/* start the TFD with the scratchbuf */
 	scratch_size = min_t(int, copy_size, IWL_HCMD_SCRATCHBUF_SIZE);
-	memcpy(&txq->scratchbufs[q->write_ptr], &out_cmd->hdr, scratch_size);
+	memcpy(&txq->scratchbufs[idx], &out_cmd->hdr, scratch_size);
 	iwl_pcie_txq_build_tfd(trans, txq,
-			       iwl_pcie_get_scratchbuf_dma(txq, q->write_ptr),
+			       iwl_pcie_get_scratchbuf_dma(txq, idx),
 			       scratch_size, true);
 
 	/* map first command fragment, if any remains */

[PATCH 4.4 26/93] iwlwifi: mvm: dont use ret when not initialised

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

commit ff6e58e648ed5f3cc43891767811d5c3c88bbd41 upstream.

fw-dbg code return ret but that variable was either 0
or not initialised. Return 0 always.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Fixes: 6a95126763fb ("iwlwifi: mvm: send dbg config hcmds to fw if set in tlv")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/iwlwifi/mvm/fw.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/iwlwifi/mvm/fw.c
@@ -935,7 +935,8 @@ int iwl_mvm_start_fw_dbg_conf(struct iwl
 	}
 
 	mvm->fw_dbg_conf = conf_id;
-	return ret;
+
+	return 0;
 }
 
 static int iwl_mvm_config_ltr(struct iwl_mvm *mvm)

[PATCH 4.4 27/93] ceph: fix race during filling readdir cache

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yan, Zheng <zyan@redhat.com>

commit af5e5eb574776cdf1b756a27cc437bff257e22fe upstream.

Readdir cache uses page cache to save dentry pointers. When adding
dentry pointers to middle of a page, we need to make sure the page
already exists. Otherwise the beginning part of the page will be
invalid pointers.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
Cc: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ceph/inode.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -1358,15 +1358,20 @@ static int fill_readdir_cache(struct ino
 
 	if (!ctl->page || pgoff != page_index(ctl->page)) {
 		ceph_readdir_cache_release(ctl);
-		ctl->page  = grab_cache_page(&dir->i_data, pgoff);
+		if (idx == 0)
+			ctl->page = grab_cache_page(&dir->i_data, pgoff);
+		else
+			ctl->page = find_lock_page(&dir->i_data, pgoff);
 		if (!ctl->page) {
 			ctl->index = -1;
-			return -ENOMEM;
+			return idx == 0 ? -ENOMEM : 0;
 		}
 		/* reading/filling the cache are serialized by
 		 * i_mutex, no need to use page lock */
 		unlock_page(ctl->page);
 		ctl->dentries = kmap(ctl->page);
+		if (idx == 0)
+			memset(ctl->dentries, 0, PAGE_CACHE_SIZE);
 	}
 
 	if (req->r_dir_release_cnt == atomic64_read(&ci->i_release_count) &&

[PATCH 4.4 28/93] usb: gadget: fsl_qe_udc: signedness bug in qe_get_frame()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit f4693b08cc901912a87369c46537b94ed4084ea0 upstream.

We can't assign -EINVAL to a u16.

Fixes: 3948f0e0c999 ('usb: add Freescale QE/CPM USB peripheral controller driver')
Acked-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/udc/fsl_qe_udc.c |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

--- a/drivers/usb/gadget/udc/fsl_qe_udc.c
+++ b/drivers/usb/gadget/udc/fsl_qe_udc.c
@@ -1878,11 +1878,8 @@ static int qe_get_frame(struct usb_gadge
 
 	tmp = in_be16(&udc->usb_param->frame_n);
 	if (tmp & 0x8000)
-		tmp = tmp & 0x07ff;
-	else
-		tmp = -EINVAL;
-
-	return (int)tmp;
+		return tmp & 0x07ff;
+	return -EINVAL;
 }
 
 static int fsl_qe_start(struct usb_gadget *gadget,

[PATCH 4.4 29/93] gpio: sa1100: fix irq probing for ucb1x00

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Russell King <rmk+kernel@armlinux.org.uk>

commit 56beac95cb88c188d2a885825a5da131edb41fe3 upstream.

ucb1x00 has used IRQ probing since it's dawn to find the GPIO interrupt
that it's connected to.  However, commit 23393d49fb75 ("gpio: kill off
set_irq_flags usage") broke this by disabling IRQ probing on GPIO
interrupts.  Fix this.

Fixes: 23393d49fb75 ("gpio: kill off set_irq_flags usage")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpio/gpio-sa1100.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpio/gpio-sa1100.c
+++ b/drivers/gpio/gpio-sa1100.c
@@ -155,7 +155,7 @@ static int sa1100_gpio_irqdomain_map(str
 {
 	irq_set_chip_and_handler(irq, &sa1100_gpio_irq_chip,
 				 handle_edge_irq);
-	irq_set_noprobe(irq);
+	irq_set_probe(irq);
 
 	return 0;
 }

[PATCH 4.4 30/93] irqchip/gicv3: Silence noisy DEBUG_PER_CPU_MAPS warning

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Morse <james.morse@arm.com>

commit 727653d6ce7103b245eb8041f55dd5885f4c3289 upstream.

gic_raise_softirq() walks the list of cpus using for_each_cpu(), it calls
gic_compute_target_list() which advances the iterator by the number of
CPUs in the cluster.

If gic_compute_target_list() reaches the last CPU it leaves the iterator
pointing at the last CPU. This means the next time round the for_each_cpu()
loop cpumask_next() will be called with an invalid CPU.

This triggers a warning when built with CONFIG_DEBUG_PER_CPU_MAPS:
[    3.077738] GICv3: CPU1: found redistributor 1 region 0:0x000000002f120000
[    3.077943] CPU1: Booted secondary processor [410fd0f0]
[    3.078542] ------------[ cut here ]------------
[    3.078746] WARNING: CPU: 1 PID: 0 at ../include/linux/cpumask.h:121 gic_raise_softirq+0x12c/0x170
[    3.078812] Modules linked in:
[    3.078869]
[    3.078930] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-rc5+ #5188
[    3.078994] Hardware name: Foundation-v8A (DT)
[    3.079059] task: ffff80087a1a0080 task.stack: ffff80087a19c000
[    3.079145] PC is at gic_raise_softirq+0x12c/0x170
[    3.079226] LR is at gic_raise_softirq+0xa4/0x170
[    3.079296] pc : [<ffff0000083ead24>] lr : [<ffff0000083eac9c>] pstate: 200001c9
[    3.081139] Call trace:
[    3.081202] Exception stack(0xffff80087a19fbe0 to 0xffff80087a19fd10)

[    3.082269] [<ffff0000083ead24>] gic_raise_softirq+0x12c/0x170
[    3.082354] [<ffff00000808e614>] smp_send_reschedule+0x34/0x40
[    3.082433] [<ffff0000080e80a0>] resched_curr+0x50/0x88
[    3.082512] [<ffff0000080e89d0>] check_preempt_curr+0x60/0xd0
[    3.082593] [<ffff0000080e8a60>] ttwu_do_wakeup+0x20/0xe8
[    3.082672] [<ffff0000080e8bb8>] ttwu_do_activate+0x90/0xc0
[    3.082753] [<ffff0000080ea9a4>] try_to_wake_up+0x224/0x370
[    3.082836] [<ffff0000080eabc8>] default_wake_function+0x10/0x18
[    3.082920] [<ffff000008103134>] __wake_up_common+0x5c/0xa0
[    3.083003] [<ffff0000081031f4>] __wake_up_locked+0x14/0x20
[    3.083086] [<ffff000008103f80>] complete+0x40/0x60
[    3.083168] [<ffff00000808df7c>] secondary_start_kernel+0x15c/0x1d0
[    3.083240] [<00000000808911a4>] 0x808911a4
[    3.113401] Detected PIPT I-cache on CPU2

Avoid updating the iterator if the next call to cpumask_next() would
cause the for_each_cpu() loop to exit.

There is no change to gic_raise_softirq()'s behaviour, (cpumask_next()s
eventual call to _find_next_bit() will return early as start >= nbits),
this patch just silences the warning.

Fixes: 021f653791ad ("irqchip: gic-v3: Initial support for GICv3")
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1474306155-3303-1-git-send-email-james.morse@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/irqchip/irq-gic-v3.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -544,7 +544,7 @@ static struct notifier_block gic_cpu_not
 static u16 gic_compute_target_list(int *base_cpu, const struct cpumask *mask,
 				   unsigned long cluster_id)
 {
-	int cpu = *base_cpu;
+	int next_cpu, cpu = *base_cpu;
 	unsigned long mpidr = cpu_logical_map(cpu);
 	u16 tlist = 0;
 
@@ -558,9 +558,10 @@ static u16 gic_compute_target_list(int *
 
 		tlist |= 1 << (mpidr & 0xf);
 
-		cpu = cpumask_next(cpu, mask);
-		if (cpu >= nr_cpu_ids)
+		next_cpu = cpumask_next(cpu, mask);
+		if (next_cpu >= nr_cpu_ids)
 			goto out;
+		cpu = next_cpu;
 
 		mpidr = cpu_logical_map(cpu);
 

[PATCH 4.4 31/93] ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Srinivas Ramana <sramana@codeaurora.org>

commit 117e5e9c4cfcb7628f08de074fbfefec1bb678b7 upstream.

If the bootloader uses the long descriptor format and jumps to
kernel decompressor code, TTBCR may not be in a right state.
Before enabling the MMU, it is required to clear the TTBCR.PD0
field to use TTBR0 for translation table walks.

The commit dbece45894d3a ("ARM: 7501/1: decompressor:
reset ttbcr for VMSA ARMv7 cores") does the reset of TTBCR.N, but
doesn't consider all the bits for the size of TTBCR.N.

Clear TTBCR.PD0 field and reset all the three bits of TTBCR.N to
indicate the use of TTBR0 and the correct base address width.

Fixes: dbece45894d3 ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores")
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/compressed/head.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -776,7 +776,7 @@ __armv7_mmu_cache_on:
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #0xfffffffd		@ domain 0 = client
 		bic     r6, r6, #1 << 31        @ 32-bit translation system
-		bic     r6, r6, #3 << 0         @ use only ttbr0
+		bic     r6, r6, #(7 << 0) | (1 << 4)	@ use only ttbr0
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
 		mcrne   p15, 0, r6, c2, c0, 2   @ load ttb control

[PATCH 4.4 32/93] arm64: debug: avoid resetting stepping state machine when TIF_SINGLESTEP

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will.deacon@arm.com>

commit 3a402a709500c5a3faca2111668c33d96555e35a upstream.

When TIF_SINGLESTEP is set for a task, the single-step state machine is
enabled and we must take care not to reset it to the active-not-pending
state if it is already in the active-pending state.

Unfortunately, that's exactly what user_enable_single_step does, by
unconditionally setting the SS bit in the SPSR for the current task.
This causes failures in the GDB testsuite, where GDB ends up missing
expected step traps if the instruction being stepped generates another
trap, e.g. PTRACE_EVENT_FORK from an SVC instruction.

This patch fixes the problem by preserving the current state of the
stepping state machine when TIF_SINGLESTEP is set on the current thread.

Cc: <stable@vger.kernel.org>
Reported-by: Yao Qi <yao.qi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/kernel/debug-monitors.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/arch/arm64/kernel/debug-monitors.c
+++ b/arch/arm64/kernel/debug-monitors.c
@@ -422,8 +422,10 @@ int kernel_active_single_step(void)
 /* ptrace API */
 void user_enable_single_step(struct task_struct *task)
 {
-	set_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP);
-	set_regs_spsr_ss(task_pt_regs(task));
+	struct thread_info *ti = task_thread_info(task);
+
+	if (!test_and_set_ti_thread_flag(ti, TIF_SINGLESTEP))
+		set_regs_spsr_ss(task_pt_regs(task));
 }
 
 void user_disable_single_step(struct task_struct *task)

[PATCH 4.4 33/93] MIPS: uprobes: remove incorrect set_orig_insn

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marcin Nowakowski <marcin.nowakowski@imgtec.com>

commit ddabfa5c2e33f1b495f3e0176de7057850915c0b upstream.

Generic kernel code implements a weak version of set_orig_insn that
moves cached 'insn' from arch_uprobe to the original code location when
the trap is removed.
MIPS variant used arch_uprobe->orig_inst which was never initialised
properly, so this code only inserted a nop instead of the original
instruction. With that change orig_inst can also be safely removed.

Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Fixes: 40e084a506eb ('MIPS: Add uprobes support.')
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14299/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/include/asm/uprobes.h |    1 -
 arch/mips/kernel/uprobes.c      |   18 ------------------
 2 files changed, 19 deletions(-)

--- a/arch/mips/include/asm/uprobes.h
+++ b/arch/mips/include/asm/uprobes.h
@@ -36,7 +36,6 @@ struct arch_uprobe {
 	unsigned long	resume_epc;
 	u32	insn[2];
 	u32	ixol[2];
-	union	mips_instruction orig_inst[MAX_UINSN_BYTES / 4];
 };
 
 struct arch_uprobe_task {
--- a/arch/mips/kernel/uprobes.c
+++ b/arch/mips/kernel/uprobes.c
@@ -280,24 +280,6 @@ int __weak set_swbp(struct arch_uprobe *
 	return uprobe_write_opcode(mm, vaddr, UPROBE_SWBP_INSN);
 }
 
-/**
- * set_orig_insn - Restore the original instruction.
- * @mm: the probed process address space.
- * @auprobe: arch specific probepoint information.
- * @vaddr: the virtual address to insert the opcode.
- *
- * For mm @mm, restore the original opcode (opcode) at @vaddr.
- * Return 0 (success) or a negative errno.
- *
- * This overrides the weak version in kernel/events/uprobes.c.
- */
-int set_orig_insn(struct arch_uprobe *auprobe, struct mm_struct *mm,
-		 unsigned long vaddr)
-{
-	return uprobe_write_opcode(mm, vaddr,
-			*(uprobe_opcode_t *)&auprobe->orig_inst[0].word);
-}
-
 void __weak arch_uprobe_copy_ixol(struct page *page, unsigned long vaddr,
 				  void *src, unsigned long len)
 {

[PATCH 4.4 34/93] MIPS: fix uretprobe implementation

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marcin Nowakowski <marcin.nowakowski@imgtec.com>

commit db06068a4fd44a57b642b369d2a295b8448f6b65 upstream.

arch_uretprobe_hijack_return_addr should replace the return address for
a call with a trampoline address.

Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Fixes: 40e084a506eb ('MIPS: Add uprobes support.')
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14298/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/uprobes.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/kernel/uprobes.c
+++ b/arch/mips/kernel/uprobes.c
@@ -257,7 +257,7 @@ unsigned long arch_uretprobe_hijack_retu
 	ra = regs->regs[31];
 
 	/* Replace the return address with the trampoline address */
-	regs->regs[31] = ra;
+	regs->regs[31] = trampoline_vaddr;
 
 	return ra;
 }

[PATCH 4.4 35/93] MIPS: Malta: Fix IOCU disable switch read for MIPS64

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Burton <paul.burton@imgtec.com>

commit 305723ab439e14debc1d339aa04e835d488b8253 upstream.

Malta boards used with CPU emulators feature a switch to disable use of
an IOCU. Software has to check this switch & ignore any present IOCU if
the switch is closed. The read used to do this was unsafe for 64 bit
kernels, as it simply casted the address 0xbf403000 to a pointer &
dereferenced it. Whilst in a 32 bit kernel this would access kseg1, in a
64 bit kernel this attempts to access xuseg & results in an address
error exception.

Fix by accessing a correctly formed ckseg1 address generated using the
CKSEG1ADDR macro.

Whilst modifying this code, define the name of the register and the bit
we care about within it, which indicates whether PCI DMA is routed to
the IOCU or straight to DRAM. The code previously checked that bit 0 was
also set, but the least significant 7 bits of the CONFIG_GEN0 register
contain the value of the MReqInfo signal provided to the IOCU OCP bus,
so singling out bit 0 makes little sense & that part of the check is
dropped.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: b6d92b4a6bdb ("MIPS: Add option to disable software I/O coherency.")
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14187/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/mti-malta/malta-setup.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -39,6 +39,9 @@
 #include <linux/console.h>
 #endif
 
+#define ROCIT_CONFIG_GEN0		0x1f403000
+#define  ROCIT_CONFIG_GEN0_PCI_IOCU	BIT(7)
+
 extern void malta_be_init(void);
 extern int malta_be_handler(struct pt_regs *regs, int is_fixup);
 
@@ -107,6 +110,8 @@ static void __init fd_activate(void)
 static int __init plat_enable_iocoherency(void)
 {
 	int supported = 0;
+	u32 cfg;
+
 	if (mips_revision_sconid == MIPS_REVISION_SCON_BONITO) {
 		if (BONITO_PCICACHECTRL & BONITO_PCICACHECTRL_CPUCOH_PRES) {
 			BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_CPUCOH_EN;
@@ -129,7 +134,8 @@ static int __init plat_enable_iocoherenc
 	} else if (mips_cm_numiocu() != 0) {
 		/* Nothing special needs to be done to enable coherency */
 		pr_info("CMP IOCU detected\n");
-		if ((*(unsigned int *)0xbf403000 & 0x81) != 0x81) {
+		cfg = __raw_readl((u32 *)CKSEG1ADDR(ROCIT_CONFIG_GEN0));
+		if (!(cfg & ROCIT_CONFIG_GEN0_PCI_IOCU)) {
 			pr_crit("IOCU OPERATION DISABLED BY SWITCH - DEFAULTING TO SW IO COHERENCY\n");
 			return 0;
 		}

[PATCH 4.4 36/93] MIPS: uprobes: fix use of uninitialised variable

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marcin Nowakowski <marcin.nowakowski@imgtec.com>

commit ca86c9ef2b322ebf24772009fdea037688cbdac1 upstream.

arch_uprobe_pre_xol needs to emulate a branch if a branch instruction
has been replaced with a breakpoint, but in fact an uninitialised local
variable was passed to the emulator routine instead of the original
instruction

Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Fixes: 40e084a506eb ('MIPS: Add uprobes support.')
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14300/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/uprobes.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/arch/mips/kernel/uprobes.c
+++ b/arch/mips/kernel/uprobes.c
@@ -157,7 +157,6 @@ bool is_trap_insn(uprobe_opcode_t *insn)
 int arch_uprobe_pre_xol(struct arch_uprobe *aup, struct pt_regs *regs)
 {
 	struct uprobe_task *utask = current->utask;
-	union mips_instruction insn;
 
 	/*
 	 * Now find the EPC where to resume after the breakpoint has been
@@ -168,10 +167,10 @@ int arch_uprobe_pre_xol(struct arch_upro
 		unsigned long epc;
 
 		epc = regs->cp0_epc;
-		__compute_return_epc_for_insn(regs, insn);
+		__compute_return_epc_for_insn(regs,
+			(union mips_instruction) aup->insn[0]);
 		aup->resume_epc = regs->cp0_epc;
 	}
-
 	utask->autask.saved_trap_nr = current->thread.trap_nr;
 	current->thread.trap_nr = UPROBE_TRAP_NR;
 	regs->cp0_epc = current->utask->xol_vaddr;

[PATCH 4.4 37/93] printk: fix parsing of "brl=" option

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicolas Iooss <nicolas.iooss_linux@m4x.org>

commit ae6c33ba6e37eea3012fe2640b22400ef3f2d0f3 upstream.

Commit bbeddf52adc1 ("printk: move braille console support into separate
braille.[ch] files") moved the parsing of braille-related options into
_braille_console_setup(), changing the type of variable str from char*
to char**.  In this commit, memcmp(str, "brl,", 4) was correctly updated
to memcmp(*str, "brl,", 4) but not memcmp(str, "brl=", 4).

Update the code to make "brl=" option work again and replace memcmp()
with strncmp() to make the compiler able to detect such an issue.

Fixes: bbeddf52adc1 ("printk: move braille console support into separate braille.[ch] files")
Link: http://lkml.kernel.org/r/20160823165700.28952-1-nicolas.iooss_linux@m4x.org
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/printk/braille.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/printk/braille.c
+++ b/kernel/printk/braille.c
@@ -9,10 +9,10 @@
 
 char *_braille_console_setup(char **str, char **brl_options)
 {
-	if (!memcmp(*str, "brl,", 4)) {
+	if (!strncmp(*str, "brl,", 4)) {
 		*brl_options = "";
 		*str += 4;
-	} else if (!memcmp(str, "brl=", 4)) {
+	} else if (!strncmp(*str, "brl=", 4)) {
 		*brl_options = *str + 4;
 		*str = strchr(*brl_options, ',');
 		if (!*str)

[PATCH 4.4 38/93] tpm: fix byte-order for the value read by tpm2_get_tpm_pt

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: apronin@chromium.org <apronin@chromium.org>

commit 1b0612b04090e416828c0dd5ed197b0913d834a0 upstream.

The result must be converted from BE byte order, which is used by the
TPM2 protocol. This has not popped out because tpm2_get_tpm_pt() has
been only used for probing.

Fixes: 7a1d7e6dd76a ("tpm: TPM 2.0 baseline support")
Change-Id: I7d71cd379b1a3b7659d20a1b6008216762596590
Signed-off-by: Andrey Pronin <apronin@chromium.org>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/tpm/tpm2-cmd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/char/tpm/tpm2-cmd.c
+++ b/drivers/char/tpm/tpm2-cmd.c
@@ -657,7 +657,7 @@ ssize_t tpm2_get_tpm_pt(struct tpm_chip
 
 	rc = tpm_transmit_cmd(chip, &cmd, sizeof(cmd), desc);
 	if (!rc)
-		*value = cmd.params.get_tpm_pt_out.value;
+		*value = be32_to_cpu(cmd.params.get_tpm_pt_out.value);
 
 	return rc;
 }

[PATCH 4.4 39/93] regulator: qcom_spmi: Add support for S4 supply on pm8941

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Boyd <stephen.boyd@linaro.org>

commit c333dfe8dba7d3e47e97e1cee3c38123e19ae73c upstream.

The S4 supply is sometimes called the boost regulator because it
outputs 5V. Typically it's connected to the 5vs1 and 5vs2
switches for use in USB OTG and HDMI applications. Add support
for this regulator which was mistakenly left out from the initial
submission of this driver.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: e92a4047419c ("regulator: Add QCOM SPMI regulator driver")
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt |    4 ++--
 drivers/regulator/qcom_spmi-regulator.c                             |    1 +
 2 files changed, 3 insertions(+), 2 deletions(-)

--- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
@@ -81,8 +81,8 @@ pm8916:
 	l14, l15, l16, l17, l18
 
 pm8941:
-	s1, s2, s3, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14,
-	l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3,
+	s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
+	l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3,
 	mvs1, mvs2
 
 The content of each sub-node is defined by the standard binding for regulators -
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -1440,6 +1440,7 @@ static const struct spmi_regulator_data
 	{ "s1", 0x1400, "vdd_s1", },
 	{ "s2", 0x1700, "vdd_s2", },
 	{ "s3", 0x1a00, "vdd_s3", },
+	{ "s4", 0xa000, },
 	{ "l1", 0x4000, "vdd_l1_l3", },
 	{ "l2", 0x4100, "vdd_l2_lvs_1_2_3", },
 	{ "l3", 0x4200, "vdd_l1_l3", },

[PATCH 4.4 40/93] regulator: qcom_spmi: Add support for get_mode/set_mode on switches

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Boyd <stephen.boyd@linaro.org>

commit 919163f6362ac23138d31fc8befdd52e5d7e488d upstream.

The voltage switches support mode switching, so add support for
these ops to those types of regulators.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: e92a4047419c ("regulator: Add QCOM SPMI regulator driver")
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/regulator/qcom_spmi-regulator.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -1050,6 +1050,8 @@ static struct regulator_ops spmi_vs_ops
 	.set_pull_down		= spmi_regulator_common_set_pull_down,
 	.set_soft_start		= spmi_regulator_common_set_soft_start,
 	.set_over_current_protection = spmi_regulator_vs_ocp,
+	.set_mode		= spmi_regulator_common_set_mode,
+	.get_mode		= spmi_regulator_common_get_mode,
 };
 
 static struct regulator_ops spmi_boost_ops = {

[PATCH 4.4 41/93] regulator: qcom_spmi: Update mvs1/mvs2 switches on pm8941

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Boyd <stephen.boyd@linaro.org>

commit 93bfe79b03365f410aa91caf04263173c008ecdf upstream.

The mvs1 and mvs2 switches are actually called 5vs1 and 5vs2 on
some datasheets. Let's rename them to match the datasheets and
also match the RPM based regulator driver which calls these by
their 5vs names (see qcom_smd-regulator.c). There aren't any
users of these regulators so far, so there aren't any concerns of
DT ABI breakage here. While we're here making updates to the
switches, also mandate usage of the OCP irq for these switches
too.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: e92a4047419c ("regulator: Add QCOM SPMI regulator driver")
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt |    2 +-
 drivers/regulator/qcom_spmi-regulator.c                             |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
@@ -83,7 +83,7 @@ pm8916:
 pm8941:
 	s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
 	l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3,
-	mvs1, mvs2
+	5vs1, 5vs2
 
 The content of each sub-node is defined by the standard binding for regulators -
 see regulator.txt - with additional custom properties described below:
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -1470,8 +1470,8 @@ static const struct spmi_regulator_data
 	{ "lvs1", 0x8000, "vdd_l2_lvs_1_2_3", },
 	{ "lvs2", 0x8100, "vdd_l2_lvs_1_2_3", },
 	{ "lvs3", 0x8200, "vdd_l2_lvs_1_2_3", },
-	{ "mvs1", 0x8300, "vin_5vs", },
-	{ "mvs2", 0x8400, "vin_5vs", },
+	{ "5vs1", 0x8300, "vin_5vs", "ocp-5vs1", },
+	{ "5vs2", 0x8400, "vin_5vs", "ocp-5vs2", },
 	{ }
 };
 

[PATCH 4.4 42/93] regulator: qcom_smd: Fix voltage ranges for pm8x41

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Boyd <sboyd@codeaurora.org>

commit 290284776bb281759b11faa287b8abccaf74bfcb upstream.

The voltage ranges listed here are wrong. The correct ranges can
be seen in the "native" spmi regulator driver
qcom_spmi-regulator.c at pldo_ranges[], ftsmps_ranges[] and
boost_ranges[] for the pldo, ftsmps, and boost type regulators.
Port these ranges over to the RPM SMD regulator driver so that we
list the appropriate set of supported voltages on pldos.

Doing this allows us to specify a voltage like 3075000 for l24,
whereas before that wasn't a supported voltage.

Fixes: da65e367b67e ("regulator: Regulator driver for the Qualcomm RPM")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/regulator/qcom_smd-regulator.c |   17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -166,29 +166,30 @@ static const struct regulator_desc pm8x4
 static const struct regulator_desc pm8841_ftsmps = {
 	.linear_ranges = (struct regulator_linear_range[]) {
 		REGULATOR_LINEAR_RANGE(350000,  0, 184, 5000),
-		REGULATOR_LINEAR_RANGE(700000, 185, 339, 10000),
+		REGULATOR_LINEAR_RANGE(1280000, 185, 261, 10000),
 	},
 	.n_linear_ranges = 2,
-	.n_voltages = 340,
+	.n_voltages = 262,
 	.ops = &rpm_smps_ldo_ops,
 };
 
 static const struct regulator_desc pm8941_boost = {
 	.linear_ranges = (struct regulator_linear_range[]) {
-		REGULATOR_LINEAR_RANGE(4000000, 0, 15, 100000),
+		REGULATOR_LINEAR_RANGE(4000000, 0, 30, 50000),
 	},
 	.n_linear_ranges = 1,
-	.n_voltages = 16,
+	.n_voltages = 31,
 	.ops = &rpm_smps_ldo_ops,
 };
 
 static const struct regulator_desc pm8941_pldo = {
 	.linear_ranges = (struct regulator_linear_range[]) {
-		REGULATOR_LINEAR_RANGE( 750000,  0,  30, 25000),
-		REGULATOR_LINEAR_RANGE(1500000, 31, 99, 50000),
+		REGULATOR_LINEAR_RANGE( 750000,  0,  63, 12500),
+		REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000),
+		REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000),
 	},
-	.n_linear_ranges = 2,
-	.n_voltages = 100,
+	.n_linear_ranges = 3,
+	.n_voltages = 164,
 	.ops = &rpm_smps_ldo_ops,
 };
 

[PATCH 4.4 44/93] ARM: sa1100: register clocks early

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Russell King <rmk+kernel@armlinux.org.uk>

commit 198b51e8a6a31d3a6f8e9dd9cade3635d0291f26 upstream.

Since we switched to use pxa_timer, we need to provide the OSTIMER0
clock.  However, as the clock is initialised early, we need to provide
the clock early as well, so that pxa_timer can find it.  Adding the
clock to the clkdev table at core_initcall() time is way too late.

Move the initialisation earlier.

Fixes: ee3a4020f7c9 ("ARM: 8250/1: sa1100: provide OSTIMER0 clock for pxa_timer")
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-sa1100/clock.c   |    3 +--
 arch/arm/mach-sa1100/generic.c |    1 +
 arch/arm/mach-sa1100/generic.h |    2 ++
 3 files changed, 4 insertions(+), 2 deletions(-)

--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -140,9 +140,8 @@ static struct clk_lookup sa11xx_clkregs[
 	CLKDEV_INIT(NULL, "OSTIMER0", &clk_36864),
 };
 
-static int __init sa11xx_clk_init(void)
+int __init sa11xx_clk_init(void)
 {
 	clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs));
 	return 0;
 }
-core_initcall(sa11xx_clk_init);
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -388,6 +388,7 @@ void __init sa1100_init_irq(void)
 	sa11x0_init_irq_nodt(IRQ_GPIO0_SC, irq_resource.start);
 
 	sa1100_init_gpio();
+	sa11xx_clk_init();
 }
 
 /*
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -44,3 +44,5 @@ int sa11x0_pm_init(void);
 #else
 static inline int sa11x0_pm_init(void) { return 0; }
 #endif
+
+int sa11xx_clk_init(void);

[PATCH 4.4 45/93] ARM: sa1100: fix 3.6864MHz clock

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Russell King <rmk+kernel@armlinux.org.uk>

commit 02ba38a5b6d6e0bc89c7b74651f1873055028a56 upstream.

pxa_timer wants to be able to call clk_enable() etc on this clock,
but our clk_enable() implementation expects non-NULL enable/disable
operations.  Provide these dummy implementations.

Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0204000
[00000000] *pgd=00000000
Internal error: Oops: 80000005 [#1] ARM
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 4.8.0-rc2+ #887
Hardware name: Intel-Assabet
task: c0644590 task.stack: c0640000
PC is at 0x0
LR is at clk_enable+0x40/0x58
pc : [<00000000>]    lr : [<c021b178>]    psr: 600000d3
sp : c0641f60  ip : c0641f4c  fp : c0641f74
r10: c1ffc7a0  r9 : 6901b118  r8 : 00000001
r7 : c0639a34  r6 : 0000001b  r5 : a00000d3  r4 : c0645d70
r3 : c0645d78  r2 : 00000001  r1 : c0641ef0  r0 : c0645d70
Flags: nZCv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment none
Control: c020717f  Table: c020717f  DAC: 00000053
Process swapper (pid: 0, stack limit = 0xc0640188)
Stack: (0xc0641f60 to 0xc0642000)
1f60: 00384000 c08762e4 c0641f98 c0641f78 c063308c c021b144 00000000 00000000
1f80: 00000000 c0660b20 ffffffff c0641fa8 c0641f9c c06220ec c0633058 c0641fb8
1fa0: c0641fac c061f114 c06220dc c0641ff4 c0641fbc c061bb68 c061f0fc ffffffff
1fc0: ffffffff 00000000 c061b6cc c0639a34 c0660cd4 c0642038 c0639a30 c0645434
1fe0: c0204000 c06380f8 00000000 c0641ff8 c0208048 c061b954 00000000 00000000
Backtrace:
[<c021b138>] (clk_enable) from [<c063308c>] (pxa_timer_nodt_init+0x40/0x120)
 r5:c08762e4 r4:00384000
[<c063304c>] (pxa_timer_nodt_init) from [<c06220ec>] (sa1100_timer_init+0x1c/0x20)
 r6:ffffffff r5:c0660b20 r4:00000000
[<c06220d0>] (sa1100_timer_init) from [<c061f114>] (time_init+0x24/0x2c)
[<c061f0f0>] (time_init) from [<c061bb68>] (start_kernel+0x220/0x42c)
[<c061b948>] (start_kernel) from [<c0208048>] (0xc0208048)
 r10:c06380f8 r8:c0204000 r7:c0645434 r6:c0639a30 r5:c0642038 r4:c0660cd4
Code: bad PC value
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Attempted to kill the idle task!

Fixes: ee3a4020f7c9 ("ARM: 8250/1: sa1100: provide OSTIMER0 clock for pxa_timer")
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-sa1100/clock.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -125,6 +125,8 @@ static unsigned long clk_36864_get_rate(
 }
 
 static struct clkops clk_36864_ops = {
+	.enable		= clk_cpu_enable,
+	.disable	= clk_cpu_disable,
 	.get_rate	= clk_36864_get_rate,
 };
 

[PATCH 4.4 46/93] ARM: sa1100: clear reset status prior to reboot

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Russell King <rmk+kernel@armlinux.org.uk>

commit da60626e7d02a4f385cae80e450afc8b07035368 upstream.

Clear the current reset status prior to rebooting the platform.  This
adds the bit missing from 04fef228fb00 ("[ARM] pxa: introduce
reset_status and clear_reset_status for driver's usage").

Fixes: 04fef228fb00 ("[ARM] pxa: introduce reset_status and clear_reset_status for driver's usage")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-sa1100/generic.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -34,6 +34,7 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/reset.h>
 
 #include "generic.h"
 #include <clocksource/pxa.h>
@@ -95,6 +96,8 @@ static void sa1100_power_off(void)
 
 void sa11x0_restart(enum reboot_mode mode, const char *cmd)
 {
+	clear_reset_status(RESET_STATUS_ALL);
+
 	if (mode == REBOOT_SOFT) {
 		/* Jump into ROM at address 0 */
 		soft_restart(0);

[PATCH 4.4 47/93] ARM: shmobile: fix regulator quirk for Gen2

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

commit c2f321126e31cd69365e65ecd4a7c774e4fc71d2 upstream.

The current implementation only works if the da9xxx devices are added
before their drivers are registered. Only then it can apply the fixes to
both devices. Otherwise, the driver for the first device gets probed
before the fix for the second device can be applied. This is what
fails when using the IP core switcher or when having the i2c master
driver as a module.

So, we need to disable both da9xxx once we detected one of them. We now
use i2c_transfer with hardcoded i2c_messages and device addresses, so we
don't need the da9xxx client devices to be instantiated. Because the
fixup is used on specific boards only, the addresses are not going to
change.

Fixes: 663fbb52159cca ("ARM: shmobile: R-Car Gen2: Add da9063/da9210 regulator quirk")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> (r8a7791/koelsch)
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c |   62 ++++++++-------------
 1 file changed, 26 insertions(+), 36 deletions(-)

--- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -41,39 +41,26 @@
 
 #define REGULATOR_IRQ_MASK	BIT(2)	/* IRQ2, active low */
 
-static void __iomem *irqc;
-
-static const u8 da9063_mask_regs[] = {
-	DA9063_REG_IRQ_MASK_A,
-	DA9063_REG_IRQ_MASK_B,
-	DA9063_REG_IRQ_MASK_C,
-	DA9063_REG_IRQ_MASK_D,
-};
-
-/* DA9210 System Control and Event Registers */
+/* start of DA9210 System Control and Event Registers */
 #define DA9210_REG_MASK_A		0x54
-#define DA9210_REG_MASK_B		0x55
-
-static const u8 da9210_mask_regs[] = {
-	DA9210_REG_MASK_A,
-	DA9210_REG_MASK_B,
-};
 
-static void da9xxx_mask_irqs(struct i2c_client *client, const u8 regs[],
-			     unsigned int nregs)
-{
-	unsigned int i;
-
-	dev_info(&client->dev, "Masking %s interrupt sources\n", client->name);
+static void __iomem *irqc;
 
-	for (i = 0; i < nregs; i++) {
-		int error = i2c_smbus_write_byte_data(client, regs[i], ~0);
-		if (error) {
-			dev_err(&client->dev, "i2c error %d\n", error);
-			return;
-		}
-	}
-}
+/* first byte sets the memory pointer, following are consecutive reg values */
+static u8 da9063_irq_clr[] = { DA9063_REG_IRQ_MASK_A, 0xff, 0xff, 0xff, 0xff };
+static u8 da9210_irq_clr[] = { DA9210_REG_MASK_A, 0xff, 0xff };
+
+static struct i2c_msg da9xxx_msgs[2] = {
+	{
+		.addr = 0x58,
+		.len = ARRAY_SIZE(da9063_irq_clr),
+		.buf = da9063_irq_clr,
+	}, {
+		.addr = 0x68,
+		.len = ARRAY_SIZE(da9210_irq_clr),
+		.buf = da9210_irq_clr,
+	},
+};
 
 static int regulator_quirk_notify(struct notifier_block *nb,
 				  unsigned long action, void *data)
@@ -93,12 +80,15 @@ static int regulator_quirk_notify(struct
 	client = to_i2c_client(dev);
 	dev_dbg(dev, "Detected %s\n", client->name);
 
-	if ((client->addr == 0x58 && !strcmp(client->name, "da9063")))
-		da9xxx_mask_irqs(client, da9063_mask_regs,
-				 ARRAY_SIZE(da9063_mask_regs));
-	else if (client->addr == 0x68 && !strcmp(client->name, "da9210"))
-		da9xxx_mask_irqs(client, da9210_mask_regs,
-				 ARRAY_SIZE(da9210_mask_regs));
+	if ((client->addr == 0x58 && !strcmp(client->name, "da9063")) ||
+	    (client->addr == 0x68 && !strcmp(client->name, "da9210"))) {
+		int ret;
+
+		dev_info(&client->dev, "clearing da9063/da9210 interrupts\n");
+		ret = i2c_transfer(client->adapter, da9xxx_msgs, ARRAY_SIZE(da9xxx_msgs));
+		if (ret != ARRAY_SIZE(da9xxx_msgs))
+			dev_err(&client->dev, "i2c error %d\n", ret);
+	}
 
 	mon = ioread32(irqc + IRQC_MONITOR);
 	if (mon & REGULATOR_IRQ_MASK)

[PATCH 4.4 48/93] ARM: sa1111: fix pcmcia suspend/resume

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Russell King <rmk+kernel@armlinux.org.uk>

commit 06dfe5cc0cc684e735cb0232fdb756d30780b05d upstream.

SA1111 PCMCIA was broken when PCMCIA switched to using dev_pm_ops for
the PCMCIA socket class.  PCMCIA used to handle suspend/resume via the
socket hosting device, which happened at normal device suspend/resume
time.

However, the referenced commit changed this: much of the resume now
happens much earlier, in the noirq resume handler of dev_pm_ops.

However, on SA1111, the PCMCIA device is not accessible as the SA1111
has not been resumed at _noirq time.  It's slightly worse than that,
because the SA1111 has already been put to sleep at _noirq time, so
suspend doesn't work properly.

Fix this by converting the core SA1111 code to use dev_pm_ops as well,
and performing its own suspend/resume at noirq time.

This fixes these errors in the kernel log:

pcmcia_socket pcmcia_socket0: time out after reset
pcmcia_socket pcmcia_socket1: time out after reset

and the resulting lack of PCMCIA cards after a S2RAM cycle.

Fixes: d7646f7632549 ("pcmcia: use dev_pm_ops for class pcmcia_socket_class")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/common/sa1111.c |   22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -869,9 +869,9 @@ struct sa1111_save_data {
 
 #ifdef CONFIG_PM
 
-static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
+static int sa1111_suspend_noirq(struct device *dev)
 {
-	struct sa1111 *sachip = platform_get_drvdata(dev);
+	struct sa1111 *sachip = dev_get_drvdata(dev);
 	struct sa1111_save_data *save;
 	unsigned long flags;
 	unsigned int val;
@@ -934,9 +934,9 @@ static int sa1111_suspend(struct platfor
  *	restored by their respective drivers, and must be called
  *	via LDM after this function.
  */
-static int sa1111_resume(struct platform_device *dev)
+static int sa1111_resume_noirq(struct device *dev)
 {
-	struct sa1111 *sachip = platform_get_drvdata(dev);
+	struct sa1111 *sachip = dev_get_drvdata(dev);
 	struct sa1111_save_data *save;
 	unsigned long flags, id;
 	void __iomem *base;
@@ -952,7 +952,7 @@ static int sa1111_resume(struct platform
 	id = sa1111_readl(sachip->base + SA1111_SKID);
 	if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
 		__sa1111_remove(sachip);
-		platform_set_drvdata(dev, NULL);
+		dev_set_drvdata(dev, NULL);
 		kfree(save);
 		return 0;
 	}
@@ -1003,8 +1003,8 @@ static int sa1111_resume(struct platform
 }
 
 #else
-#define sa1111_suspend NULL
-#define sa1111_resume  NULL
+#define sa1111_suspend_noirq NULL
+#define sa1111_resume_noirq  NULL
 #endif
 
 static int sa1111_probe(struct platform_device *pdev)
@@ -1038,6 +1038,11 @@ static int sa1111_remove(struct platform
 	return 0;
 }
 
+static struct dev_pm_ops sa1111_pm_ops = {
+	.suspend_noirq = sa1111_suspend_noirq,
+	.resume_noirq = sa1111_resume_noirq,
+};
+
 /*
  *	Not sure if this should be on the system bus or not yet.
  *	We really want some way to register a system device at
@@ -1050,10 +1055,9 @@ static int sa1111_remove(struct platform
 static struct platform_driver sa1111_device_driver = {
 	.probe		= sa1111_probe,
 	.remove		= sa1111_remove,
-	.suspend	= sa1111_suspend,
-	.resume		= sa1111_resume,
 	.driver		= {
 		.name	= "sa1111",
+		.pm	= &sa1111_pm_ops,
 	},
 };
 

[PATCH 4.4 49/93] hwrng: omap - Fix assumption that runtime_get_sync will always succeed

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nishanth Menon <nm@ti.com>

commit 61dc0a446e5d08f2de8a24b45f69a1e302bb1b1b upstream.

pm_runtime_get_sync does return a error value that must be checked for
error conditions, else, due to various reasons, the device maynot be
enabled and the system will crash due to lack of clock to the hardware
module.

Before:
12.562784] [00000000] *pgd=fe193835
12.562792] Internal error: : 1406 [#1] SMP ARM
[...]
12.562864] CPU: 1 PID: 241 Comm: modprobe Not tainted 4.7.0-rc4-next-20160624 #2
12.562867] Hardware name: Generic DRA74X (Flattened Device Tree)
12.562872] task: ed51f140 ti: ed44c000 task.ti: ed44c000
12.562886] PC is at omap4_rng_init+0x20/0x84 [omap_rng]
12.562899] LR is at set_current_rng+0xc0/0x154 [rng_core]
[...]

After the proper checks:
[   94.366705] omap_rng 48090000.rng: _od_fail_runtime_resume: FIXME:
missing hwmod/omap_dev info
[   94.375767] omap_rng 48090000.rng: Failed to runtime_get device -19
[   94.382351] omap_rng 48090000.rng: initialization failed.

Fixes: 665d92fa85b5 ("hwrng: OMAP: convert to use runtime PM")
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/hw_random/omap-rng.c |   16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -384,7 +384,12 @@ static int omap_rng_probe(struct platfor
 	}
 
 	pm_runtime_enable(&pdev->dev);
-	pm_runtime_get_sync(&pdev->dev);
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to runtime_get device: %d\n", ret);
+		pm_runtime_put_noidle(&pdev->dev);
+		goto err_ioremap;
+	}
 
 	ret = (dev->of_node) ? of_get_omap_rng_device_details(priv, pdev) :
 				get_omap_rng_device_details(priv);
@@ -435,8 +440,15 @@ static int __maybe_unused omap_rng_suspe
 static int __maybe_unused omap_rng_resume(struct device *dev)
 {
 	struct omap_rng_dev *priv = dev_get_drvdata(dev);
+	int ret;
+
+	ret = pm_runtime_get_sync(dev);
+	if (ret) {
+		dev_err(dev, "Failed to runtime_get device: %d\n", ret);
+		pm_runtime_put_noidle(dev);
+		return ret;
+	}
 
-	pm_runtime_get_sync(dev);
 	priv->pdata->init(priv);
 
 	return 0;

[PATCH 4.4 50/93] blk-mq: actually hook up defer list when running requests

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Omar Sandoval <osandov@fb.com>

commit 52b9c330c6a8a4b5a1819bdaddf4ec76ab571e81 upstream.

If ->queue_rq() returns BLK_MQ_RQ_QUEUE_OK, we use continue and skip
over the rest of the loop body. However, dptr is assigned later in the
loop body, and the BLK_MQ_RQ_QUEUE_OK case is exactly the case that we'd
want it for.

NVMe isn't actually using BLK_MQ_F_DEFER_ISSUE yet, nor is any other
in-tree driver, but if the code's going to be there, it might as well
work.

Fixes: 74c450521dd8 ("blk-mq: add a 'list' parameter to ->queue_rq()")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/blk-mq.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -780,7 +780,7 @@ static void __blk_mq_run_hw_queue(struct
 		switch (ret) {
 		case BLK_MQ_RQ_QUEUE_OK:
 			queued++;
-			continue;
+			break;
 		case BLK_MQ_RQ_QUEUE_BUSY:
 			list_add(&rq->queuelist, &rq_list);
 			__blk_mq_requeue_request(rq);

[PATCH 4.4 51/93] pstore: drop file opened reference count

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geliang Tang <geliangtang@163.com>

commit 52d210d961a62a9662e27f14d6505d6741b2fb02 upstream.

In ee1d267423a1 ("pstore: add pstore unregister") I added:
	.owner = THIS_MODULE,
in both pstore_fs_type and pstore_file_operations to increase a reference
count when pstore filesystem is mounted and pstore file is opened.

But, it's repetitive. There is no need to increase the opened reference
count. We only need to increase the mounted reference count. When a file
is opened, the filesystem can't be unmounted. Hence the pstore module
can't be unloaded either.

So I drop the opened reference count in this patch.

Fixes: ee1d267423a1 ("pstore: add pstore unregister")
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/pstore/inode.c |    1 -
 1 file changed, 1 deletion(-)

--- a/fs/pstore/inode.c
+++ b/fs/pstore/inode.c
@@ -178,7 +178,6 @@ static loff_t pstore_file_llseek(struct
 }
 
 static const struct file_operations pstore_file_operations = {
-	.owner		= THIS_MODULE,
 	.open		= pstore_file_open,
 	.read		= pstore_file_read,
 	.llseek		= pstore_file_llseek,

[PATCH 4.4 52/93] tile: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit cdf8b4633075f2171d440d2e37c9c2609019a81a upstream.

AT_VECTOR_SIZE_ARCH should be defined with the maximum number of
NEW_AUX_ENT entries that ARCH_DLINFO can contain, but it wasn't defined
for tile at all even though ARCH_DLINFO will contain one NEW_AUX_ENT for
the VDSO address.

This shouldn't be a problem as AT_VECTOR_SIZE_BASE includes space for
AT_BASE_PLATFORM which tile doesn't use, but lets define it now and add
the comment above ARCH_DLINFO as found in several other architectures to
remind future modifiers of ARCH_DLINFO to keep AT_VECTOR_SIZE_ARCH up to
date.

Fixes: 4a556f4f56da ("tile: implement gettimeofday() via vDSO")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/tile/include/asm/elf.h         |    1 +
 arch/tile/include/uapi/asm/auxvec.h |    2 ++
 2 files changed, 3 insertions(+)

--- a/arch/tile/include/asm/elf.h
+++ b/arch/tile/include/asm/elf.h
@@ -129,6 +129,7 @@ extern int dump_task_regs(struct task_st
 struct linux_binprm;
 extern int arch_setup_additional_pages(struct linux_binprm *bprm,
 				       int executable_stack);
+/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
 #define ARCH_DLINFO \
 do { \
 	NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); \
--- a/arch/tile/include/uapi/asm/auxvec.h
+++ b/arch/tile/include/uapi/asm/auxvec.h
@@ -18,4 +18,6 @@
 /* The vDSO location. */
 #define AT_SYSINFO_EHDR         33
 
+#define AT_VECTOR_SIZE_ARCH 1 /* entries in ARCH_DLINFO */
+
 #endif /* _ASM_TILE_AUXVEC_H */

[PATCH 4.4 53/93] iwlmvm: mvm: set correct state in smart-fifo configuration

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: striebit <shaul.triebitz@intel.com>

commit 849a9627299100ae3f0ce573fc87d2b476f3bb59 upstream.

Currently the state sent in SF configuration is always
FULL_ON.
This commit sets the correct state (e.g. INIT_OFF
when station is not associated).

Fixes: commit f4a3ee493e69 ("iwlwifi: mvm: Always enable the smart FIFO")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/iwlwifi/mvm/sf.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/iwlwifi/mvm/sf.c
+++ b/drivers/net/wireless/iwlwifi/mvm/sf.c
@@ -215,7 +215,7 @@ static int iwl_mvm_sf_config(struct iwl_
 			     enum iwl_sf_state new_state)
 {
 	struct iwl_sf_cfg_cmd sf_cmd = {
-		.state = cpu_to_le32(SF_FULL_ON),
+		.state = cpu_to_le32(new_state),
 	};
 	struct ieee80211_sta *sta;
 	int ret = 0;

[PATCH 4.4 55/93] [media] em28xx-i2c: rt_mutex_trylock() returns zero on failure

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit e44c153b30c9a0580fc2b5a93f3c6d593def2278 upstream.

The code is checking for negative returns but it should be checking for
zero.

Fixes: aab3125c43d8 ('[media] em28xx: add support for registering multiple i2c buses')

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/em28xx/em28xx-i2c.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/media/usb/em28xx/em28xx-i2c.c
+++ b/drivers/media/usb/em28xx/em28xx-i2c.c
@@ -507,9 +507,8 @@ static int em28xx_i2c_xfer(struct i2c_ad
 	if (dev->disconnected)
 		return -ENODEV;
 
-	rc = rt_mutex_trylock(&dev->i2c_bus_lock);
-	if (rc < 0)
-		return rc;
+	if (!rt_mutex_trylock(&dev->i2c_bus_lock))
+		return -EAGAIN;
 
 	/* Switch I2C bus if needed */
 	if (bus != dev->cur_i2c_bus &&

[PATCH 4.4 56/93] [media] gspca: avoid unused variable warnings

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit d7e92e15e92fc987640772bf110586898b5f15aa upstream.

When CONFIG_INPUT is disabled, multiple gspca backend drivers
print compile-time warnings about unused variables:

media/usb/gspca/cpia1.c: In function 'sd_stopN':
media/usb/gspca/cpia1.c:1627:13: error: unused variable 'sd' [-Werror=unused-variable]
media/usb/gspca/konica.c: In function 'sd_stopN':
media/usb/gspca/konica.c:246:13: error: unused variable 'sd' [-Werror=unused-variable]

This annotates the variables as __maybe_unused, to let the compiler
know that they are declared intentionally.

Fixes: ee186fd96a5f ("[media] gscpa_t613: Add support for the camera button")
Fixes: c2f644aeeba3 ("[media] gspca_cpia1: Add support for button")
Fixes: b517af722860 ("V4L/DVB: gspca_konica: New gspca subdriver for konica chipset using cams")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/gspca/cpia1.c  |    2 +-
 drivers/media/usb/gspca/konica.c |    2 +-
 drivers/media/usb/gspca/t613.c   |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/media/usb/gspca/cpia1.c
+++ b/drivers/media/usb/gspca/cpia1.c
@@ -1624,7 +1624,7 @@ static int sd_start(struct gspca_dev *gs
 
 static void sd_stopN(struct gspca_dev *gspca_dev)
 {
-	struct sd *sd = (struct sd *) gspca_dev;
+	struct sd *sd __maybe_unused = (struct sd *) gspca_dev;
 
 	command_pause(gspca_dev);
 
--- a/drivers/media/usb/gspca/konica.c
+++ b/drivers/media/usb/gspca/konica.c
@@ -243,7 +243,7 @@ static int sd_start(struct gspca_dev *gs
 
 static void sd_stopN(struct gspca_dev *gspca_dev)
 {
-	struct sd *sd = (struct sd *) gspca_dev;
+	struct sd *sd __maybe_unused = (struct sd *) gspca_dev;
 
 	konica_stream_off(gspca_dev);
 #if IS_ENABLED(CONFIG_INPUT)
--- a/drivers/media/usb/gspca/t613.c
+++ b/drivers/media/usb/gspca/t613.c
@@ -837,7 +837,7 @@ static void sd_pkt_scan(struct gspca_dev
 			u8 *data,			/* isoc packet */
 			int len)			/* iso packet length */
 {
-	struct sd *sd = (struct sd *) gspca_dev;
+	struct sd *sd __maybe_unused = (struct sd *) gspca_dev;
 	int pkt_type;
 
 	if (data[0] == 0x5a) {

[PATCH 4.4 57/93] ath9k: Fix programming of minCCA power threshold

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sven Eckelmann <sven@narfation.org>

commit aaab50fcea78ae3414c3afc25aae8d0603df34d0 upstream.

The function ar9003_hw_apply_minccapwr_thresh takes as second parameter not
a pointer to the channel but a boolean value describing whether the channel
is 2.4GHz or not. This broke (according to the origin commit) the ETSI
regulatory compliance on 5GHz channels.

Fixes: 3533bf6b15a0 ("ath9k: Fix regulatory compliance")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -4176,7 +4176,7 @@ static void ath9k_hw_ar9300_set_board_va
 	if (!AR_SREV_9330(ah) && !AR_SREV_9340(ah) && !AR_SREV_9531(ah))
 		ar9003_hw_internal_regulator_apply(ah);
 	ar9003_hw_apply_tuning_caps(ah);
-	ar9003_hw_apply_minccapwr_thresh(ah, chan);
+	ar9003_hw_apply_minccapwr_thresh(ah, is2ghz);
 	ar9003_hw_txend_to_xpa_off_apply(ah, is2ghz);
 	ar9003_hw_thermometer_apply(ah);
 	ar9003_hw_thermo_cal_apply(ah);

[PATCH 4.4 58/93] avr32: off by one in at32_init_pio()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 55f1cf83d5cf885c75267269729805852039c834 upstream.

The pio_dev[] array has MAX_NR_PIO_DEVICES elements so the > should be
>=.

Fixes: 5f97f7f9400d ('[PATCH] avr32 architecture')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/avr32/mach-at32ap/pio.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -435,7 +435,7 @@ void __init at32_init_pio(struct platfor
 	struct resource *regs;
 	struct pio_device *pio;
 
-	if (pdev->id > MAX_NR_PIO_DEVICES) {
+	if (pdev->id >= MAX_NR_PIO_DEVICES) {
 		dev_err(&pdev->dev, "only %d PIO devices supported\n",
 			MAX_NR_PIO_DEVICES);
 		return;

[PATCH 4.4 59/93] fnic: pci_dma_mapping_error() doesnt return an error code

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit dd7328e4c53649c1c7ec36bc1cf5b229b8662047 upstream.

pci_dma_mapping_error() returns true on error and false on success.

Fixes: fd6ddfa4c1dd ('fnic: check pci_map_single() return value')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/fnic/fnic_fcs.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/scsi/fnic/fnic_fcs.c
+++ b/drivers/scsi/fnic/fnic_fcs.c
@@ -954,8 +954,8 @@ int fnic_alloc_rq_frame(struct vnic_rq *
 	skb_put(skb, len);
 	pa = pci_map_single(fnic->pdev, skb->data, len, PCI_DMA_FROMDEVICE);
 
-	r = pci_dma_mapping_error(fnic->pdev, pa);
-	if (r) {
+	if (pci_dma_mapping_error(fnic->pdev, pa)) {
+		r = -ENOMEM;
 		printk(KERN_ERR "PCI mapping failed with error %d\n", r);
 		goto free_skb;
 	}
@@ -1093,8 +1093,8 @@ static int fnic_send_frame(struct fnic *
 
 	pa = pci_map_single(fnic->pdev, eth_hdr, tot_len, PCI_DMA_TODEVICE);
 
-	ret = pci_dma_mapping_error(fnic->pdev, pa);
-	if (ret) {
+	if (pci_dma_mapping_error(fnic->pdev, pa)) {
+		ret = -ENOMEM;
 		printk(KERN_ERR "DMA map failed with error %d\n", ret);
 		goto free_skb_on_err;
 	}

[PATCH 4.4 60/93] dmaengine: at_xdmac: fix debug string

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Belloni <alexandre.belloni@free-electrons.com>

commit 3935e08768ff777da6496521b1fc36f72823672c upstream.

mbr_ds is an integer, don't use %pad to print it.

Fixes: commit 268914f4e7a0 ("dmaengine: at_xdmac: use %pad format string for dma_addr_t")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/dma/at_xdmac.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -1183,8 +1183,8 @@ static struct at_xdmac_desc *at_xdmac_me
 	desc->lld.mbr_cfg = chan_cc;
 
 	dev_dbg(chan2dev(chan),
-		"%s: lld: mbr_da=%pad, mbr_ds=%pad, mbr_ubc=0x%08x, mbr_cfg=0x%08x\n",
-		__func__, &desc->lld.mbr_da, &desc->lld.mbr_ds, desc->lld.mbr_ubc,
+		"%s: lld: mbr_da=%pad, mbr_ds=0x%08x, mbr_ubc=0x%08x, mbr_cfg=0x%08x\n",
+		__func__, &desc->lld.mbr_da, desc->lld.mbr_ds, desc->lld.mbr_ubc,
 		desc->lld.mbr_cfg);
 
 	return desc;

[PATCH 4.4 61/93] svc: Avoid garbage replies when pc_func() returns rpc_drop_reply

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chuck Lever <chuck.lever@oracle.com>

commit 0533b13072f4bf35738290d2cf9e299c7bc6c42a upstream.

If an RPC program does not set vs_dispatch and pc_func() returns
rpc_drop_reply, the server sends a reply anyway containing a single
word containing the value RPC_DROP_REPLY (in network byte-order, of
course). This is a nonsense RPC message.

Fixes: 9e701c610923 ("svcrpc: simpler request dropping")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/svc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -1188,7 +1188,8 @@ svc_process_common(struct svc_rqst *rqst
 		*statp = procp->pc_func(rqstp, rqstp->rq_argp, rqstp->rq_resp);
 
 		/* Encode reply */
-		if (test_bit(RQ_DROPME, &rqstp->rq_flags)) {
+		if (*statp == rpc_drop_reply ||
+		    test_bit(RQ_DROPME, &rqstp->rq_flags)) {
 			if (procp->pc_release)
 				procp->pc_release(rqstp, NULL, rqstp->rq_resp);
 			goto dropit;

[PATCH 4.4 62/93] NFS: Dont drop CB requests with invalid principals

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chuck Lever <chuck.lever@oracle.com>

commit a4e187d83d88eeaba6252aac0a2ffe5eaa73a818 upstream.

Before commit 778be232a207 ("NFS do not find client in NFSv4
pg_authenticate"), the Linux callback server replied with
RPC_AUTH_ERROR / RPC_AUTH_BADCRED, instead of dropping the CB
request. Let's restore that behavior so the server has a chance to
do something useful about it, and provide a warning that helps
admins correct the problem.

Fixes: 778be232a207 ("NFS do not find client in NFSv4 ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/callback_xdr.c |    6 +++++-
 net/sunrpc/svc.c      |    5 +++++
 2 files changed, 10 insertions(+), 1 deletion(-)

--- a/fs/nfs/callback_xdr.c
+++ b/fs/nfs/callback_xdr.c
@@ -912,7 +912,7 @@ static __be32 nfs4_callback_compound(str
 	if (hdr_arg.minorversion == 0) {
 		cps.clp = nfs4_find_client_ident(SVC_NET(rqstp), hdr_arg.cb_ident);
 		if (!cps.clp || !check_gss_callback_principal(cps.clp, rqstp))
-			return rpc_drop_reply;
+			goto out_invalidcred;
 	}
 
 	cps.minorversion = hdr_arg.minorversion;
@@ -940,6 +940,10 @@ static __be32 nfs4_callback_compound(str
 	nfs_put_client(cps.clp);
 	dprintk("%s: done, status = %u\n", __func__, ntohl(status));
 	return rpc_success;
+
+out_invalidcred:
+	pr_warn_ratelimited("NFS: NFSv4 callback contains invalid cred\n");
+	return rpc_autherr_badcred;
 }
 
 /*
--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -1194,6 +1194,11 @@ svc_process_common(struct svc_rqst *rqst
 				procp->pc_release(rqstp, NULL, rqstp->rq_resp);
 			goto dropit;
 		}
+		if (*statp == rpc_autherr_badcred) {
+			if (procp->pc_release)
+				procp->pc_release(rqstp, NULL, rqstp->rq_resp);
+			goto err_bad_auth;
+		}
 		if (*statp == rpc_success &&
 		    (xdr = procp->pc_encode) &&
 		    !xdr(rqstp, resv->iov_base+resv->iov_len, rqstp->rq_resp)) {

[PATCH 4.4 63/93] pNFS/files: Fix layoutcommit after a commit to DS

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <trond.myklebust@primarydata.com>

commit 73e6c5d854d3f7f75e8b46d3e54aeb5d83fe6b1f upstream.

According to the errata
https://www.rfc-editor.org/errata_search.php?rfc=5661&eid=2751
we should always send layout commit after a commit to DS.

Fixes: bc7d4b8fd091 ("nfs/filelayout: set layoutcommit...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/filelayout/filelayout.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/fs/nfs/filelayout/filelayout.c
+++ b/fs/nfs/filelayout/filelayout.c
@@ -374,8 +374,7 @@ static int filelayout_commit_done_cb(str
 		return -EAGAIN;
 	}
 
-	if (data->verf.committed == NFS_UNSTABLE)
-		pnfs_set_layoutcommit(data->inode, data->lseg, data->lwb);
+	pnfs_set_layoutcommit(data->inode, data->lseg, data->lwb);
 
 	return 0;
 }

[PATCH 4.4 64/93] pNFS/flexfiles: Fix layoutcommit after a commit to DS

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <trond.myklebust@primarydata.com>

commit c001c87a63aa2f35358e33eb05e45e4cbcb34f54 upstream.

We should always do a layoutcommit after commit to DS, except if
the layout segment we're using has set FF_FLAGS_NO_LAYOUTCOMMIT.

Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/flexfilelayout/flexfilelayout.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/fs/nfs/flexfilelayout/flexfilelayout.c
+++ b/fs/nfs/flexfilelayout/flexfilelayout.c
@@ -1414,8 +1414,7 @@ static int ff_layout_commit_done_cb(stru
 		return -EAGAIN;
 	}
 
-	if (data->verf.committed == NFS_UNSTABLE
-	    && ff_layout_need_layoutcommit(data->lseg))
+	if (ff_layout_need_layoutcommit(data->lseg))
 		pnfs_set_layoutcommit(data->inode, data->lseg, data->lwb);
 
 	return 0;

[PATCH 4.4 65/93] ASoC: Intel: Skylake: Fix error return code in skl_probe()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wei Yongjun <weiyj.lk@gmail.com>

commit 979cf59acc9d634cc140aadd0d2915947ab303cc upstream.

Fix to return error code -ENODEV from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 87b2bdf02278 ("ASoC: Intel: Skylake: Initialize NHLT table")
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Acked-By: Vinod Koul <vinod.kou@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/intel/skylake/skl.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/sound/soc/intel/skylake/skl.c
+++ b/sound/soc/intel/skylake/skl.c
@@ -464,8 +464,10 @@ static int skl_probe(struct pci_dev *pci
 
 	skl->nhlt = skl_nhlt_init(bus->dev);
 
-	if (skl->nhlt == NULL)
+	if (skl->nhlt == NULL) {
+		err = -ENODEV;
 		goto out_free;
+	}
 
 	pci_set_drvdata(skl->pci, ebus);
 

[PATCH 4.4 66/93] brcmfmac: Fix glob_skb leak in brcmf_sdiod_recv_chain

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Fainelli <f.fainelli@gmail.com>

commit 3bdae810721b33061d2e541bd78a70f86ca42af3 upstream.

In case brcmf_sdiod_recv_chain() cannot complete a succeful call to
brcmf_sdiod_buffrw, we would be leaking glom_skb and not free it as we
should, fix this.

Reported-by: coverity (CID 1164856)
Fixes: a413e39a38573 ("brcmfmac: fix brcmf_sdcard_recv_chain() for host without sg support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -726,8 +726,10 @@ int brcmf_sdiod_recv_chain(struct brcmf_
 			return -ENOMEM;
 		err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr,
 					 glom_skb);
-		if (err)
+		if (err) {
+			brcmu_pkt_buf_free_skb(glom_skb);
 			goto done;
+		}
 
 		skb_queue_walk(pktq, skb) {
 			memcpy(skb->data, glom_skb->data, skb->len);

[PATCH 4.4 67/93] brcmsmac: Free packet if dma_mapping_error() fails in dma_rxfill

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Fainelli <f.fainelli@gmail.com>

commit 5c5fa1f464ac954982df1d96b9f9a5103d21aedd upstream.

In case dma_mapping_error() returns an error in dma_rxfill, we would be
leaking a packet that we allocated with brcmu_pkt_buf_get_skb().

Reported-by: coverity (CID 1081819)
Fixes: 67d0cf50bd32 ("brcmsmac: Fix WARNING caused by lack of calls to dma_mapping_error()")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/brcm80211/brcmsmac/dma.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/brcm80211/brcmsmac/dma.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/dma.c
@@ -1079,8 +1079,10 @@ bool dma_rxfill(struct dma_pub *pub)
 
 		pa = dma_map_single(di->dmadev, p->data, di->rxbufsize,
 				    DMA_FROM_DEVICE);
-		if (dma_mapping_error(di->dmadev, pa))
+		if (dma_mapping_error(di->dmadev, pa)) {
+			brcmu_pkt_buf_free_skb(p);
 			return false;
+		}
 
 		/* save the free packet pointer */
 		di->rxp[rxout] = p;

[PATCH 4.4 68/93] brcmsmac: Initialize power in brcms_c_stf_ss_algo_channel_get()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Fainelli <f.fainelli@gmail.com>

commit f823a2aa8f4674c095a5413b9e3ba12d82df06f2 upstream.

wlc_phy_txpower_get_current() does a logical OR of power->flags, which
presumes that power.flags was initiliazed earlier by the caller,
unfortunately, this is not the case, so make sure we zero out the struct
tx_power before calling into wlc_phy_txpower_get_current().

Reported-by: coverity (CID 146011)
Fixes: 5b435de0d7868 ("net: wireless: add brcm80211 drivers")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/brcm80211/brcmsmac/stf.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/brcm80211/brcmsmac/stf.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/stf.c
@@ -87,7 +87,7 @@ void
 brcms_c_stf_ss_algo_channel_get(struct brcms_c_info *wlc, u16 *ss_algo_channel,
 			    u16 chanspec)
 {
-	struct tx_power power;
+	struct tx_power power = { };
 	u8 siso_mcs_id, cdd_mcs_id, stbc_mcs_id;
 
 	/* Clear previous settings */

[PATCH 4.4 69/93] powerpc/prom: Fix sub-processor option passed to ibm, client-architecture-support

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Ellerman <mpe@ellerman.id.au>

commit 66443efa83dc73775100b7442962ce2cb0d4472e upstream.

When booting from an OpenFirmware which supports it, we use the
"ibm,client-architecture-support" firmware call to communicate
our capabilities to firmware.

The format of the structure we pass to firmware is specified in
PAPR (Power Architecture Platform Requirements), or the public version
LoPAPR (Linux on Power Architecture Platform Reference).

Referring to table 244 in LoPAPR v1.1, option vector 5 contains a 4 byte
field at bytes 17-20 for the "Platform Facilities Enable". This is
followed by a 1 byte field at byte 21 for "Sub-Processor Represenation
Level".

Comparing to the code, there we have the Platform Facilities
options (OV5_PFO_*) at byte 17, but we fail to pad that field out to its
full width of 4 bytes. This means the OV5_SUB_PROCESSORS option is
incorrectly placed at byte 18.

Fix it by adding zero bytes for bytes 18, 19, 20, and comment the bytes
to hopefully make it clearer in future.

As far as I'm aware nothing actually consumes this value at this time,
so the effect of this bug is nil in practice.

It does mean we've been incorrectly setting bit 15 of the "Platform
Facilities Enable" option for the past ~3 1/2 years, so we should avoid
allocating that bit to anything else in future.

Fixes: df77c7992029 ("powerpc/pseries: Update ibm,architecture.vec for PAPR 2.7/POWER8")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/prom_init.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -694,7 +694,7 @@ unsigned char ibm_architecture_vec[] = {
 	OV4_MIN_ENT_CAP,		/* minimum VP entitled capacity */
 
 	/* option vector 5: PAPR/OF options */
-	VECTOR_LENGTH(18),		/* length */
+	VECTOR_LENGTH(21),		/* length */
 	0,				/* don't ignore, don't halt */
 	OV5_FEAT(OV5_LPAR) | OV5_FEAT(OV5_SPLPAR) | OV5_FEAT(OV5_LARGE_PAGES) |
 	OV5_FEAT(OV5_DRCONF_MEMORY) | OV5_FEAT(OV5_DONATE_DEDICATE_CPU) |
@@ -725,8 +725,11 @@ unsigned char ibm_architecture_vec[] = {
 	0,
 	0,
 	OV5_FEAT(OV5_PFO_HW_RNG) | OV5_FEAT(OV5_PFO_HW_ENCR) |
-	OV5_FEAT(OV5_PFO_HW_842),
-	OV5_FEAT(OV5_SUB_PROCESSORS),
+	OV5_FEAT(OV5_PFO_HW_842),				/* Byte 17 */
+	0,							/* Byte 18 */
+	0,							/* Byte 19 */
+	0,							/* Byte 20 */
+	OV5_FEAT(OV5_SUB_PROCESSORS),				/* Byte 21 */
 
 	/* option vector 6: IBM PAPR hints */
 	VECTOR_LENGTH(3),		/* length */

[PATCH 4.4 70/93] sysctl: handle error writing UINT_MAX to u32 fields

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>

commit e7d316a02f683864a12389f8808570e37fb90aa3 upstream.

We have scripts which write to certain fields on 3.18 kernels but this
seems to be failing on 4.4 kernels.  An entry which we write to here is
xfrm_aevent_rseqth which is u32.

  echo 4294967295  > /proc/sys/net/core/xfrm_aevent_rseqth

Commit 230633d109e3 ("kernel/sysctl.c: detect overflows when converting
to int") prevented writing to sysctl entries when integer overflow
occurs.  However, this does not apply to unsigned integers.

Heinrich suggested that we introduce a new option to handle 64 bit
limits and set min as 0 and max as UINT_MAX.  This might not work as it
leads to issues similar to __do_proc_doulongvec_minmax.  Alternatively,
we would need to change the datatype of the entry to 64 bit.

  static int __do_proc_doulongvec_minmax(void *data, struct ctl_table
  {
      i = (unsigned long *) data;   //This cast is causing to read beyond the size of data (u32)
      vleft = table->maxlen / sizeof(unsigned long); //vleft is 0 because maxlen is sizeof(u32) which is lesser than sizeof(unsigned long) on x86_64.

Introduce a new proc handler proc_douintvec.  Individual proc entries
will need to be updated to use the new handler.

[akpm@linux-foundation.org: coding-style fixes]
Fixes: 230633d109e3 ("kernel/sysctl.c:detect overflows when converting to int")
Link: http://lkml.kernel.org/r/1471479806-5252-1-git-send-email-subashab@codeaurora.org
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/sysctl.h |    2 ++
 kernel/sysctl.c        |   45 +++++++++++++++++++++++++++++++++++++++++++--
 2 files changed, 45 insertions(+), 2 deletions(-)

--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -41,6 +41,8 @@ extern int proc_dostring(struct ctl_tabl
 			 void __user *, size_t *, loff_t *);
 extern int proc_dointvec(struct ctl_table *, int,
 			 void __user *, size_t *, loff_t *);
+extern int proc_douintvec(struct ctl_table *, int,
+			 void __user *, size_t *, loff_t *);
 extern int proc_dointvec_minmax(struct ctl_table *, int,
 				void __user *, size_t *, loff_t *);
 extern int proc_dointvec_jiffies(struct ctl_table *, int,
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -2051,6 +2051,21 @@ static int do_proc_dointvec_conv(bool *n
 	return 0;
 }
 
+static int do_proc_douintvec_conv(bool *negp, unsigned long *lvalp,
+				 int *valp,
+				 int write, void *data)
+{
+	if (write) {
+		if (*negp)
+			return -EINVAL;
+		*valp = *lvalp;
+	} else {
+		unsigned int val = *valp;
+		*lvalp = (unsigned long)val;
+	}
+	return 0;
+}
+
 static const char proc_wspace_sep[] = { ' ', '\t', '\n' };
 
 static int __do_proc_dointvec(void *tbl_data, struct ctl_table *table,
@@ -2178,8 +2193,27 @@ static int do_proc_dointvec(struct ctl_t
 int proc_dointvec(struct ctl_table *table, int write,
 		     void __user *buffer, size_t *lenp, loff_t *ppos)
 {
-    return do_proc_dointvec(table,write,buffer,lenp,ppos,
-		    	    NULL,NULL);
+	return do_proc_dointvec(table, write, buffer, lenp, ppos, NULL, NULL);
+}
+
+/**
+ * proc_douintvec - read a vector of unsigned integers
+ * @table: the sysctl table
+ * @write: %TRUE if this is a write to the sysctl file
+ * @buffer: the user buffer
+ * @lenp: the size of the user buffer
+ * @ppos: file position
+ *
+ * Reads/writes up to table->maxlen/sizeof(unsigned int) unsigned integer
+ * values from/to the user buffer, treated as an ASCII string.
+ *
+ * Returns 0 on success.
+ */
+int proc_douintvec(struct ctl_table *table, int write,
+		     void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+	return do_proc_dointvec(table, write, buffer, lenp, ppos,
+				do_proc_douintvec_conv, NULL);
 }
 
 /*
@@ -2792,6 +2826,12 @@ int proc_dointvec(struct ctl_table *tabl
 	return -ENOSYS;
 }
 
+int proc_douintvec(struct ctl_table *table, int write,
+		  void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+	return -ENOSYS;
+}
+
 int proc_dointvec_minmax(struct ctl_table *table, int write,
 		    void __user *buffer, size_t *lenp, loff_t *ppos)
 {
@@ -2837,6 +2877,7 @@ int proc_doulongvec_ms_jiffies_minmax(st
  * exception granted :-)
  */
 EXPORT_SYMBOL(proc_dointvec);
+EXPORT_SYMBOL(proc_douintvec);
 EXPORT_SYMBOL(proc_dointvec_jiffies);
 EXPORT_SYMBOL(proc_dointvec_minmax);
 EXPORT_SYMBOL(proc_dointvec_userhz_jiffies);

[PATCH 4.4 71/93] ASoC: omap-mcpdm: Fix irq resource handling

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

commit a8719670687c46ed2e904c0d05fa4cd7e4950cd1 upstream.

Fixes: ddd17531ad908 ("ASoC: omap-mcpdm: Clean up with devm_* function")

Managed irq request will not doing any good in ASoC probe level as it is
not going to free up the irq when the driver is unbound from the sound
card.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reported-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/omap/omap-mcpdm.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/sound/soc/omap/omap-mcpdm.c
+++ b/sound/soc/omap/omap-mcpdm.c
@@ -390,8 +390,8 @@ static int omap_mcpdm_probe(struct snd_s
 	pm_runtime_get_sync(mcpdm->dev);
 	omap_mcpdm_write(mcpdm, MCPDM_REG_CTRL, 0x00);
 
-	ret = devm_request_irq(mcpdm->dev, mcpdm->irq, omap_mcpdm_irq_handler,
-				0, "McPDM", (void *)mcpdm);
+	ret = request_irq(mcpdm->irq, omap_mcpdm_irq_handler, 0, "McPDM",
+			  (void *)mcpdm);
 
 	pm_runtime_put_sync(mcpdm->dev);
 
@@ -416,6 +416,7 @@ static int omap_mcpdm_remove(struct snd_
 {
 	struct omap_mcpdm *mcpdm = snd_soc_dai_get_drvdata(dai);
 
+	free_irq(mcpdm->irq, (void *)mcpdm);
 	pm_runtime_disable(mcpdm->dev);
 
 	return 0;

[PATCH 4.4 72/93] kernel/fork: fix CLONE_CHILD_CLEARTID regression in nscd

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michal Hocko <mhocko@suse.com>

commit 735f2770a770156100f534646158cb58cb8b2939 upstream.

Commit fec1d0115240 ("[PATCH] Disable CLONE_CHILD_CLEARTID for abnormal
exit") has caused a subtle regression in nscd which uses
CLONE_CHILD_CLEARTID to clear the nscd_certainly_running flag in the
shared databases, so that the clients are notified when nscd is
restarted.  Now, when nscd uses a non-persistent database, clients that
have it mapped keep thinking the database is being updated by nscd, when
in fact nscd has created a new (anonymous) one (for non-persistent
databases it uses an unlinked file as backend).

The original proposal for the CLONE_CHILD_CLEARTID change claimed
(https://lkml.org/lkml/2006/10/25/233):

: The NPTL library uses the CLONE_CHILD_CLEARTID flag on clone() syscalls
: on behalf of pthread_create() library calls.  This feature is used to
: request that the kernel clear the thread-id in user space (at an address
: provided in the syscall) when the thread disassociates itself from the
: address space, which is done in mm_release().
:
: Unfortunately, when a multi-threaded process incurs a core dump (such as
: from a SIGSEGV), the core-dumping thread sends SIGKILL signals to all of
: the other threads, which then proceed to clear their user-space tids
: before synchronizing in exit_mm() with the start of core dumping.  This
: misrepresents the state of process's address space at the time of the
: SIGSEGV and makes it more difficult for someone to debug NPTL and glibc
: problems (misleading him/her to conclude that the threads had gone away
: before the fault).
:
: The fix below is to simply avoid the CLONE_CHILD_CLEARTID action if a
: core dump has been initiated.

The resulting patch from Roland (https://lkml.org/lkml/2006/10/26/269)
seems to have a larger scope than the original patch asked for.  It
seems that limitting the scope of the check to core dumping should work
for SIGSEGV issue describe above.

[Changelog partly based on Andreas' description]
Fixes: fec1d0115240 ("[PATCH] Disable CLONE_CHILD_CLEARTID for abnormal exit")
Link: http://lkml.kernel.org/r/1471968749-26173-1-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Tested-by: William Preston <wpreston@suse.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Andreas Schwab <schwab@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/fork.c |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -901,14 +901,12 @@ void mm_release(struct task_struct *tsk,
 	deactivate_mm(tsk, mm);
 
 	/*
-	 * If we're exiting normally, clear a user-space tid field if
-	 * requested.  We leave this alone when dying by signal, to leave
-	 * the value intact in a core dump, and to save the unnecessary
-	 * trouble, say, a killed vfork parent shouldn't touch this mm.
-	 * Userland only wants this done for a sys_exit.
+	 * Signal userspace if we're not exiting with a core dump
+	 * because we want to leave the value intact for debugging
+	 * purposes.
 	 */
 	if (tsk->clear_child_tid) {
-		if (!(tsk->flags & PF_SIGNALED) &&
+		if (!(tsk->signal->flags & SIGNAL_GROUP_COREDUMP) &&
 		    atomic_read(&mm->mm_users) > 1) {
 			/*
 			 * We don't check the error code - if userspace has

[PATCH 4.4 73/93] dmaengine: at_xdmac: fix to pass correct device identity to free_irq()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wei Yongjun <weiyj.lk@gmail.com>

commit 6a8b0c6b18f62a277ffb2139d0c0253fe35d7feb upstream.

free_irq() expects the same device identity that was passed to
corresponding request_irq(), otherwise the IRQ is not freed.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/dma/at_xdmac.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -2055,7 +2055,7 @@ err_dma_unregister:
 err_clk_disable:
 	clk_disable_unprepare(atxdmac->clk);
 err_free_irq:
-	free_irq(atxdmac->irq, atxdmac->dma.dev);
+	free_irq(atxdmac->irq, atxdmac);
 	return ret;
 }
 
@@ -2071,7 +2071,7 @@ static int at_xdmac_remove(struct platfo
 
 	synchronize_irq(atxdmac->irq);
 
-	free_irq(atxdmac->irq, atxdmac->dma.dev);
+	free_irq(atxdmac->irq, atxdmac);
 
 	for (i = 0; i < atxdmac->dma.chancnt; i++) {
 		struct at_xdmac_chan *atchan = &atxdmac->chan[i];

[PATCH 4.4 75/93] IB/ipoib: Fix memory corruption in ipoib cm mode connect flow

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Erez Shitrit <erezsh@mellanox.com>

commit 546481c2816ea3c061ee9d5658eb48070f69212e upstream.

When a new CM connection is being requested, ipoib driver copies data
from the path pointer in the CM/tx object, the path object might be
invalid at the point and memory corruption will happened later when now
the CM driver will try using that data.

The next scenario demonstrates it:
	neigh_add_path --> ipoib_cm_create_tx -->
	queue_work (pointer to path is in the cm/tx struct)
	#while the work is still in the queue,
	#the port goes down and causes the ipoib_flush_paths:
	ipoib_flush_paths --> path_free --> kfree(path)
	#at this point the work scheduled starts.
	ipoib_cm_tx_start --> copy from the (invalid)path pointer:
	(memcpy(&pathrec, &p->path->pathrec, sizeof pathrec);)
	 -> memory corruption.

To fix that the driver now starts the CM/tx connection only if that
specific path exists in the general paths database.
This check is protected with the relevant locks, and uses the gid from
the neigh member in the CM/tx object which is valid according to the ref
count that was taken by the CM/tx.

Fixes: 839fcaba35 ('IPoIB: Connected mode experimental support')
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/ulp/ipoib/ipoib.h      |    1 +
 drivers/infiniband/ulp/ipoib/ipoib_cm.c   |   16 ++++++++++++++++
 drivers/infiniband/ulp/ipoib/ipoib_main.c |    2 +-
 3 files changed, 18 insertions(+), 1 deletion(-)

--- a/drivers/infiniband/ulp/ipoib/ipoib.h
+++ b/drivers/infiniband/ulp/ipoib/ipoib.h
@@ -472,6 +472,7 @@ void ipoib_send(struct net_device *dev,
 		struct ipoib_ah *address, u32 qpn);
 void ipoib_reap_ah(struct work_struct *work);
 
+struct ipoib_path *__path_find(struct net_device *dev, void *gid);
 void ipoib_mark_paths_invalid(struct net_device *dev);
 void ipoib_flush_paths(struct net_device *dev);
 struct ipoib_dev_priv *ipoib_intf_alloc(const char *format);
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -1299,6 +1299,8 @@ void ipoib_cm_destroy_tx(struct ipoib_cm
 	}
 }
 
+#define QPN_AND_OPTIONS_OFFSET	4
+
 static void ipoib_cm_tx_start(struct work_struct *work)
 {
 	struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv,
@@ -1307,6 +1309,7 @@ static void ipoib_cm_tx_start(struct wor
 	struct ipoib_neigh *neigh;
 	struct ipoib_cm_tx *p;
 	unsigned long flags;
+	struct ipoib_path *path;
 	int ret;
 
 	struct ib_sa_path_rec pathrec;
@@ -1319,7 +1322,19 @@ static void ipoib_cm_tx_start(struct wor
 		p = list_entry(priv->cm.start_list.next, typeof(*p), list);
 		list_del_init(&p->list);
 		neigh = p->neigh;
+
 		qpn = IPOIB_QPN(neigh->daddr);
+		/*
+		 * As long as the search is with these 2 locks,
+		 * path existence indicates its validity.
+		 */
+		path = __path_find(dev, neigh->daddr + QPN_AND_OPTIONS_OFFSET);
+		if (!path) {
+			pr_info("%s ignore not valid path %pI6\n",
+				__func__,
+				neigh->daddr + QPN_AND_OPTIONS_OFFSET);
+			goto free_neigh;
+		}
 		memcpy(&pathrec, &p->path->pathrec, sizeof pathrec);
 
 		spin_unlock_irqrestore(&priv->lock, flags);
@@ -1331,6 +1346,7 @@ static void ipoib_cm_tx_start(struct wor
 		spin_lock_irqsave(&priv->lock, flags);
 
 		if (ret) {
+free_neigh:
 			neigh = p->neigh;
 			if (neigh) {
 				neigh->cm = NULL;
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -481,7 +481,7 @@ int ipoib_set_mode(struct net_device *de
 	return -EINVAL;
 }
 
-static struct ipoib_path *__path_find(struct net_device *dev, void *gid)
+struct ipoib_path *__path_find(struct net_device *dev, void *gid)
 {
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
 	struct rb_node *n = priv->path_tree.rb_node;

[PATCH 4.4 76/93] IB/core: Fix use after free in send_leave function

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Erez Shitrit <erezsh@mellanox.com>

commit 68c6bcdd8bd00394c234b915ab9b97c74104130c upstream.

The function send_leave sets the member: group->query_id
(group->query_id = ret) after calling the sa_query, but leave_handler
can be executed before the setting and it might delete the group object,
and will get a memory corruption.

Additionally, this patch gets rid of group->query_id variable which is
not used.

Fixes: faec2f7b96b5 ('IB/sa: Track multicast join/leave requests')
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/core/multicast.c |   13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

--- a/drivers/infiniband/core/multicast.c
+++ b/drivers/infiniband/core/multicast.c
@@ -106,7 +106,6 @@ struct mcast_group {
 	atomic_t		refcount;
 	enum mcast_group_state	state;
 	struct ib_sa_query	*query;
-	int			query_id;
 	u16			pkey_index;
 	u8			leave_state;
 	int			retries;
@@ -339,11 +338,7 @@ static int send_join(struct mcast_group
 				       member->multicast.comp_mask,
 				       3000, GFP_KERNEL, join_handler, group,
 				       &group->query);
-	if (ret >= 0) {
-		group->query_id = ret;
-		ret = 0;
-	}
-	return ret;
+	return (ret > 0) ? 0 : ret;
 }
 
 static int send_leave(struct mcast_group *group, u8 leave_state)
@@ -363,11 +358,7 @@ static int send_leave(struct mcast_group
 				       IB_SA_MCMEMBER_REC_JOIN_STATE,
 				       3000, GFP_KERNEL, leave_handler,
 				       group, &group->query);
-	if (ret >= 0) {
-		group->query_id = ret;
-		ret = 0;
-	}
-	return ret;
+	return (ret > 0) ? 0 : ret;
 }
 
 static void join_group(struct mcast_group *group, struct mcast_member *member,

[PATCH 4.4 77/93] IB/ipoib: Dont allow MC joins during light MC flush

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Vesker <valex@mellanox.com>

commit 344bacca8cd811809fc33a249f2738ab757d327f upstream.

This fix solves a race between light flush and on the fly joins.
Light flush doesn't set the device to down and unset IPOIB_OPER_UP
flag, this means that if while flushing we have a MC join in progress
and the QP was attached to BC MGID we can have a mismatches when
re-attaching a QP to the BC MGID.

The light flush would set the broadcast group to NULL causing an on
the fly join to rejoin and reattach to the BC MCG as well as adding
the BC MGID to the multicast list. The flush process would later on
remove the BC MGID and detach it from the QP. On the next flush
the BC MGID is present in the multicast list but not found when trying
to detach it because of the previous double attach and single detach.

[18332.714265] ------------[ cut here ]------------
[18332.717775] WARNING: CPU: 6 PID: 3767 at drivers/infiniband/core/verbs.c:280 ib_dealloc_pd+0xff/0x120 [ib_core]
...
[18332.775198] Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011
[18332.779411]  0000000000000000 ffff8800b50dfbb0 ffffffff813fed47 0000000000000000
[18332.784960]  0000000000000000 ffff8800b50dfbf0 ffffffff8109add1 0000011832f58300
[18332.790547]  ffff880226a596c0 ffff880032482000 ffff880032482830 ffff880226a59280
[18332.796199] Call Trace:
[18332.798015]  [<ffffffff813fed47>] dump_stack+0x63/0x8c
[18332.801831]  [<ffffffff8109add1>] __warn+0xd1/0xf0
[18332.805403]  [<ffffffff8109aebd>] warn_slowpath_null+0x1d/0x20
[18332.809706]  [<ffffffffa025d90f>] ib_dealloc_pd+0xff/0x120 [ib_core]
[18332.814384]  [<ffffffffa04f3d7c>] ipoib_transport_dev_cleanup+0xfc/0x1d0 [ib_ipoib]
[18332.820031]  [<ffffffffa04ed648>] ipoib_ib_dev_cleanup+0x98/0x110 [ib_ipoib]
[18332.825220]  [<ffffffffa04e62c8>] ipoib_dev_cleanup+0x2d8/0x550 [ib_ipoib]
[18332.830290]  [<ffffffffa04e656f>] ipoib_uninit+0x2f/0x40 [ib_ipoib]
[18332.834911]  [<ffffffff81772a8a>] rollback_registered_many+0x1aa/0x2c0
[18332.839741]  [<ffffffff81772bd1>] rollback_registered+0x31/0x40
[18332.844091]  [<ffffffff81773b18>] unregister_netdevice_queue+0x48/0x80
[18332.848880]  [<ffffffffa04f489b>] ipoib_vlan_delete+0x1fb/0x290 [ib_ipoib]
[18332.853848]  [<ffffffffa04df1cd>] delete_child+0x7d/0xf0 [ib_ipoib]
[18332.858474]  [<ffffffff81520c08>] dev_attr_store+0x18/0x30
[18332.862510]  [<ffffffff8127fe4a>] sysfs_kf_write+0x3a/0x50
[18332.866349]  [<ffffffff8127f4e0>] kernfs_fop_write+0x120/0x170
[18332.870471]  [<ffffffff81207198>] __vfs_write+0x28/0xe0
[18332.874152]  [<ffffffff810e09bf>] ? percpu_down_read+0x1f/0x50
[18332.878274]  [<ffffffff81208062>] vfs_write+0xa2/0x1a0
[18332.881896]  [<ffffffff812093a6>] SyS_write+0x46/0xa0
[18332.885632]  [<ffffffff810039b7>] do_syscall_64+0x57/0xb0
[18332.889709]  [<ffffffff81883321>] entry_SYSCALL64_slow_path+0x25/0x25
[18332.894727] ---[ end trace 09ebbe31f831ef17 ]---

Fixes: ee1e2c82c245 ("IPoIB: Refresh paths instead of flushing them on SM change events")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/ulp/ipoib/ipoib_ib.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -1028,8 +1028,17 @@ static void __ipoib_ib_dev_flush(struct
 	}
 
 	if (level == IPOIB_FLUSH_LIGHT) {
+		int oper_up;
 		ipoib_mark_paths_invalid(dev);
+		/* Set IPoIB operation as down to prevent races between:
+		 * the flush flow which leaves MCG and on the fly joins
+		 * which can happen during that time. mcast restart task
+		 * should deal with join requests we missed.
+		 */
+		oper_up = test_and_clear_bit(IPOIB_FLAG_OPER_UP, &priv->flags);
 		ipoib_mcast_dev_flush(dev);
+		if (oper_up)
+			set_bit(IPOIB_FLAG_OPER_UP, &priv->flags);
 		ipoib_flush_ah(dev);
 	}
 

[PATCH 4.4 78/93] IB/mlx4: Fix incorrect MC join state bit-masking on SR-IOV

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Vesker <valex@mellanox.com>

commit e5ac40cd66c2f3cd11bc5edc658f012661b16347 upstream.

Because of an incorrect bit-masking done on the join state bits, when
handling a join request we failed to detect a difference between the
group join state and the request join state when joining as send only
full member (0x8). This caused the MC join request not to be sent.
This issue is relevant only when SRIOV is enabled and SM supports
send only full member.

This fix separates scope bits and join states bits a nibble each.

Fixes: b9c5d6a64358 ('IB/mlx4: Add multicast group (MCG) paravirtualization for SR-IOV')
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/mlx4/mcg.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/drivers/infiniband/hw/mlx4/mcg.c
+++ b/drivers/infiniband/hw/mlx4/mcg.c
@@ -489,7 +489,7 @@ static u8 get_leave_state(struct mcast_g
 		if (!group->members[i])
 			leave_state |= (1 << i);
 
-	return leave_state & (group->rec.scope_join_state & 7);
+	return leave_state & (group->rec.scope_join_state & 0xf);
 }
 
 static int join_group(struct mcast_group *group, int slave, u8 join_mask)
@@ -564,8 +564,8 @@ static void mlx4_ib_mcg_timeout_handler(
 		} else
 			mcg_warn_group(group, "DRIVER BUG\n");
 	} else if (group->state == MCAST_LEAVE_SENT) {
-		if (group->rec.scope_join_state & 7)
-			group->rec.scope_join_state &= 0xf8;
+		if (group->rec.scope_join_state & 0xf)
+			group->rec.scope_join_state &= 0xf0;
 		group->state = MCAST_IDLE;
 		mutex_unlock(&group->lock);
 		if (release_group(group, 1))
@@ -605,7 +605,7 @@ static int handle_leave_req(struct mcast
 static int handle_join_req(struct mcast_group *group, u8 join_mask,
 			   struct mcast_req *req)
 {
-	u8 group_join_state = group->rec.scope_join_state & 7;
+	u8 group_join_state = group->rec.scope_join_state & 0xf;
 	int ref = 0;
 	u16 status;
 	struct ib_sa_mcmember_data *sa_data = (struct ib_sa_mcmember_data *)req->sa_mad.data;
@@ -690,8 +690,8 @@ static void mlx4_ib_mcg_work_handler(str
 			u8 cur_join_state;
 
 			resp_join_state = ((struct ib_sa_mcmember_data *)
-						group->response_sa_mad.data)->scope_join_state & 7;
-			cur_join_state = group->rec.scope_join_state & 7;
+						group->response_sa_mad.data)->scope_join_state & 0xf;
+			cur_join_state = group->rec.scope_join_state & 0xf;
 
 			if (method == IB_MGMT_METHOD_GET_RESP) {
 				/* successfull join */
@@ -710,7 +710,7 @@ process_requests:
 		req = list_first_entry(&group->pending_list, struct mcast_req,
 				       group_list);
 		sa_data = (struct ib_sa_mcmember_data *)req->sa_mad.data;
-		req_join_state = sa_data->scope_join_state & 0x7;
+		req_join_state = sa_data->scope_join_state & 0xf;
 
 		/* For a leave request, we will immediately answer the VF, and
 		 * update our internal counters. The actual leave will be sent

[PATCH 4.4 79/93] IB/mlx4: Fix code indentation in QP1 MAD flow

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jack Morgenstein <jackm@dev.mellanox.co.il>

commit baa0be7026e2f7d1d40bfd45909044169e9e3c68 upstream.

The indentation in the QP1 GRH flow in procedure build_mlx_header is
really confusing. Fix it, in preparation for a commit which touches
this code.

Fixes: 1ffeb2eb8be9 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/mlx4/qp.c |   36 +++++++++++++++++++-----------------
 1 file changed, 19 insertions(+), 17 deletions(-)

--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -2331,24 +2331,26 @@ static int build_mlx_header(struct mlx4_
 		sqp->ud_header.grh.flow_label    =
 			ah->av.ib.sl_tclass_flowlabel & cpu_to_be32(0xfffff);
 		sqp->ud_header.grh.hop_limit     = ah->av.ib.hop_limit;
-		if (is_eth)
+		if (is_eth) {
 			memcpy(sqp->ud_header.grh.source_gid.raw, sgid.raw, 16);
-		else {
-		if (mlx4_is_mfunc(to_mdev(ib_dev)->dev)) {
-			/* When multi-function is enabled, the ib_core gid
-			 * indexes don't necessarily match the hw ones, so
-			 * we must use our own cache */
-			sqp->ud_header.grh.source_gid.global.subnet_prefix =
-				to_mdev(ib_dev)->sriov.demux[sqp->qp.port - 1].
-						       subnet_prefix;
-			sqp->ud_header.grh.source_gid.global.interface_id =
-				to_mdev(ib_dev)->sriov.demux[sqp->qp.port - 1].
-					       guid_cache[ah->av.ib.gid_index];
-		} else
-			ib_get_cached_gid(ib_dev,
-					  be32_to_cpu(ah->av.ib.port_pd) >> 24,
-					  ah->av.ib.gid_index,
-					  &sqp->ud_header.grh.source_gid, NULL);
+		} else {
+			if (mlx4_is_mfunc(to_mdev(ib_dev)->dev)) {
+				/* When multi-function is enabled, the ib_core gid
+				 * indexes don't necessarily match the hw ones, so
+				 * we must use our own cache
+				 */
+				sqp->ud_header.grh.source_gid.global.subnet_prefix =
+					to_mdev(ib_dev)->sriov.demux[sqp->qp.port - 1].
+							       subnet_prefix;
+				sqp->ud_header.grh.source_gid.global.interface_id =
+					to_mdev(ib_dev)->sriov.demux[sqp->qp.port - 1].
+						       guid_cache[ah->av.ib.gid_index];
+			} else {
+				ib_get_cached_gid(ib_dev,
+						  be32_to_cpu(ah->av.ib.port_pd) >> 24,
+						  ah->av.ib.gid_index,
+						  &sqp->ud_header.grh.source_gid, NULL);
+			}
 		}
 		memcpy(sqp->ud_header.grh.destination_gid.raw,
 		       ah->av.ib.dgid, 16);

[PATCH 4.4 80/93] IB/mlx4: Use correct subnet-prefix in QP1 mads under SR-IOV

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jack Morgenstein <jackm@dev.mellanox.co.il>

commit 8ec07bf8a8b57d6c58927a16a0a22c0115cf2855 upstream.

When sending QP1 MAD packets which use a GRH, the source GID
(which consists of the 64-bit subnet prefix, and the 64 bit port GUID)
must be included in the packet GRH.

For SR-IOV, a GID cache is used, since the source GID needs to be the
slave's source GID, and not the Hypervisor's GID. This cache also
included a subnet_prefix. Unfortunately, the subnet_prefix field in
the cache was never initialized (to the default subnet prefix 0xfe80::0).
As a result, this field remained all zeroes.  Therefore, when SR-IOV
was active, all QP1 packets which included a GRH had a source GID
subnet prefix of all-zeroes.

However, the subnet-prefix should initially be 0xfe80::0 (the default
subnet prefix). In addition, if OpenSM modifies a port's subnet prefix,
the new subnet prefix must be used in the GRH when sending QP1 packets.
To fix this we now initialize the subnet prefix in the SR-IOV GID cache
to the default subnet prefix. We update the cached value if/when OpenSM
modifies the port's subnet prefix. We take this cached value when sending
QP1 packets when SR-IOV is active.

Note that the value is stored as an atomic64. This eliminates any need
for locking when the subnet prefix is being updated.

Note also that we depend on the FW generating the "port management change"
event for tracking subnet-prefix changes performed by OpenSM. If running
early FW (before 2.9.4630), subnet prefix changes will not be tracked (but
the default subnet prefix still will be stored in the cache; therefore
users who do not modify the subnet prefix will not have a problem).
IF there is a need for such tracking also for early FW, we will add that
capability in a subsequent patch.

Fixes: 1ffeb2eb8be9 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/mlx4/mad.c     |   23 +++++++++++++++++++++++
 drivers/infiniband/hw/mlx4/mlx4_ib.h |    2 +-
 drivers/infiniband/hw/mlx4/qp.c      |    5 +++--
 3 files changed, 27 insertions(+), 3 deletions(-)

--- a/drivers/infiniband/hw/mlx4/mad.c
+++ b/drivers/infiniband/hw/mlx4/mad.c
@@ -1080,6 +1080,27 @@ void handle_port_mgmt_change_event(struc
 
 		/* Generate GUID changed event */
 		if (changed_attr & MLX4_EQ_PORT_INFO_GID_PFX_CHANGE_MASK) {
+			if (mlx4_is_master(dev->dev)) {
+				union ib_gid gid;
+				int err = 0;
+
+				if (!eqe->event.port_mgmt_change.params.port_info.gid_prefix)
+					err = __mlx4_ib_query_gid(&dev->ib_dev, port, 0, &gid, 1);
+				else
+					gid.global.subnet_prefix =
+						eqe->event.port_mgmt_change.params.port_info.gid_prefix;
+				if (err) {
+					pr_warn("Could not change QP1 subnet prefix for port %d: query_gid error (%d)\n",
+						port, err);
+				} else {
+					pr_debug("Changing QP1 subnet prefix for port %d. old=0x%llx. new=0x%llx\n",
+						 port,
+						 (u64)atomic64_read(&dev->sriov.demux[port - 1].subnet_prefix),
+						 be64_to_cpu(gid.global.subnet_prefix));
+					atomic64_set(&dev->sriov.demux[port - 1].subnet_prefix,
+						     be64_to_cpu(gid.global.subnet_prefix));
+				}
+			}
 			mlx4_ib_dispatch_event(dev, port, IB_EVENT_GID_CHANGE);
 			/*if master, notify all slaves*/
 			if (mlx4_is_master(dev->dev))
@@ -2154,6 +2175,8 @@ int mlx4_ib_init_sriov(struct mlx4_ib_de
 		if (err)
 			goto demux_err;
 		dev->sriov.demux[i].guid_cache[0] = gid.global.interface_id;
+		atomic64_set(&dev->sriov.demux[i].subnet_prefix,
+			     be64_to_cpu(gid.global.subnet_prefix));
 		err = alloc_pv_object(dev, mlx4_master_func_num(dev->dev), i + 1,
 				      &dev->sriov.sqps[i]);
 		if (err)
--- a/drivers/infiniband/hw/mlx4/mlx4_ib.h
+++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h
@@ -441,7 +441,7 @@ struct mlx4_ib_demux_ctx {
 	struct workqueue_struct *wq;
 	struct workqueue_struct *ud_wq;
 	spinlock_t ud_lock;
-	__be64 subnet_prefix;
+	atomic64_t subnet_prefix;
 	__be64 guid_cache[128];
 	struct mlx4_ib_dev *dev;
 	/* the following lock protects both mcg_table and mcg_mgid0_list */
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -2340,8 +2340,9 @@ static int build_mlx_header(struct mlx4_
 				 * we must use our own cache
 				 */
 				sqp->ud_header.grh.source_gid.global.subnet_prefix =
-					to_mdev(ib_dev)->sriov.demux[sqp->qp.port - 1].
-							       subnet_prefix;
+					cpu_to_be64(atomic64_read(&(to_mdev(ib_dev)->sriov.
+								    demux[sqp->qp.port - 1].
+								    subnet_prefix)));
 				sqp->ud_header.grh.source_gid.global.interface_id =
 					to_mdev(ib_dev)->sriov.demux[sqp->qp.port - 1].
 						       guid_cache[ah->av.ib.gid_index];

[PATCH 4.4 82/93] aio: mark AIO pseudo-fs noexec

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jann Horn <jann@thejh.net>

commit 22f6b4d34fcf039c63a94e7670e0da24f8575a5a upstream.

This ensures that do_mmap() won't implicitly make AIO memory mappings
executable if the READ_IMPLIES_EXEC personality flag is set.  Such
behavior is problematic because the security_mmap_file LSM hook doesn't
catch this case, potentially permitting an attacker to bypass a W^X
policy enforced by SELinux.

I have tested the patch on my machine.

To test the behavior, compile and run this:

    #define _GNU_SOURCE
    #include <unistd.h>
    #include <sys/personality.h>
    #include <linux/aio_abi.h>
    #include <err.h>
    #include <stdlib.h>
    #include <stdio.h>
    #include <sys/syscall.h>

    int main(void) {
        personality(READ_IMPLIES_EXEC);
        aio_context_t ctx = 0;
        if (syscall(__NR_io_setup, 1, &ctx))
            err(1, "io_setup");

        char cmd[1000];
        sprintf(cmd, "cat /proc/%d/maps | grep -F '/[aio]'",
            (int)getpid());
        system(cmd);
        return 0;
    }

In the output, "rw-s" is good, "rwxs" is bad.

Signed-off-by: Jann Horn <jann@thejh.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/aio.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/fs/aio.c
+++ b/fs/aio.c
@@ -239,7 +239,12 @@ static struct dentry *aio_mount(struct f
 	static const struct dentry_operations ops = {
 		.d_dname	= simple_dname,
 	};
-	return mount_pseudo(fs_type, "aio:", NULL, &ops, AIO_RING_MAGIC);
+	struct dentry *root = mount_pseudo(fs_type, "aio:", NULL, &ops,
+					   AIO_RING_MAGIC);
+
+	if (!IS_ERR(root))
+		root->d_sb->s_iflags |= SB_I_NOEXEC;
+	return root;
 }
 
 /* aio_setup

[PATCH 4.4 83/93] clk: xgene: Add missing parenthesis when clearing divider value

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Loc Ho <lho@apm.com>

commit 0f4c7a138dfefb0ebdbaf56e3ba2acd2958a6605 upstream.

In the initial fix for non-zero divider shift value, the parenthesis
was missing after the negate operation. This patch adds the required
parenthesis. Otherwise, lower bits may be cleared unintentionally.

Signed-off-by: Loc Ho <lho@apm.com>
Acked-by: Toan Le <toanle@apm.com>
Fixes: 1382ea631ddd ("clk: xgene: Fix divider with non-zero shift value")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/clk-xgene.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/clk/clk-xgene.c
+++ b/drivers/clk/clk-xgene.c
@@ -351,8 +351,8 @@ static int xgene_clk_set_rate(struct clk
 		/* Set new divider */
 		data = xgene_clk_read(pclk->param.divider_reg +
 				pclk->param.reg_divider_offset);
-		data &= ~((1 << pclk->param.reg_divider_width) - 1)
-				<< pclk->param.reg_divider_shift;
+		data &= ~(((1 << pclk->param.reg_divider_width) - 1)
+				<< pclk->param.reg_divider_shift);
 		data |= divider;
 		xgene_clk_write(data, pclk->param.divider_reg +
 					pclk->param.reg_divider_offset);

[PATCH 4.4 84/93] dm log writes: fix bug with too large bios

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <mpatocka@redhat.com>

commit 7efb367320f56fc4d549875b6f3a6940018ef2e5 upstream.

bio_alloc() can allocate a bio with at most BIO_MAX_PAGES (256) vector
entries.  However, the incoming bio may have more vector entries if it
was allocated by other means.  For example, bcache submits bios with
more than BIO_MAX_PAGES entries.  This results in bio_alloc() failure.

To avoid the failure, change the code so that it allocates bio with at
most BIO_MAX_PAGES entries.  If the incoming bio has more entries,
bio_add_page() will fail and a new bio will be allocated - the code that
handles bio_add_page() failure already exists in the dm-log-writes
target.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-log-writes.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/md/dm-log-writes.c
+++ b/drivers/md/dm-log-writes.c
@@ -259,7 +259,7 @@ static int log_one_block(struct log_writ
 	sector++;
 
 	atomic_inc(&lc->io_blocks);
-	bio = bio_alloc(GFP_KERNEL, block->vec_cnt);
+	bio = bio_alloc(GFP_KERNEL, min(block->vec_cnt, BIO_MAX_PAGES));
 	if (!bio) {
 		DMERR("Couldn't alloc log bio");
 		goto error;
@@ -280,7 +280,7 @@ static int log_one_block(struct log_writ
 		if (ret != block->vecs[i].bv_len) {
 			atomic_inc(&lc->io_blocks);
 			submit_bio(WRITE, bio);
-			bio = bio_alloc(GFP_KERNEL, block->vec_cnt - i);
+			bio = bio_alloc(GFP_KERNEL, min(block->vec_cnt - i, BIO_MAX_PAGES));
 			if (!bio) {
 				DMERR("Couldn't alloc log bio");
 				goto error;

[PATCH 4.4 85/93] USB: serial: cp210x: fix hardware flow-control disable

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com>

commit a377f9e906af4df9071ba8ddba60188cb4013d93 upstream.

A bug in the CRTSCTS handling caused RTS to alternate between

CRTSCTS=0 => "RTS is transmit active signal" and
CRTSCTS=1 => "RTS is used for receive flow control"

instead of

CRTSCTS=0 => "RTS is statically active" and
CRTSCTS=1 => "RTS is used for receive flow control"

This only happened after first having enabled CRTSCTS.

Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com>
Fixes: 39a66b8d22a3 ("[PATCH] USB: CP2101 Add support for flow control")
[johan: reword commit message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
[johan: backport to 4.4 ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---

This is a backport of an upstream fix to v4.4, which should apply too
earlier stable trees as well.

Johan


 drivers/usb/serial/cp210x.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -784,7 +784,7 @@ static void cp210x_set_termios(struct tt
 		} else {
 			modem_ctl[0] &= ~0x7B;
 			modem_ctl[0] |= 0x01;
-			modem_ctl[1] |= 0x40;
+			modem_ctl[1] = 0x40;
 			dev_dbg(dev, "%s - flow control = NONE\n", __func__);
 		}
 

[PATCH 4.4 86/93] usb: misc: legousbtower: Fix NULL pointer deference

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2fae9e5a7babada041e2e161699ade2447a01989 upstream.

This patch fixes a NULL pointer dereference caused by a race codition in
the probe function of the legousbtower driver. It re-structures the
probe function to only register the interface after successfully reading
the board's firmware ID.

The probe function does not deregister the usb interface after an error
receiving the devices firmware ID. The device file registered
(/dev/usb/legousbtower%d) may be read/written globally before the probe
function returns. When tower_delete is called in the probe function
(after an r/w has been initiated), core dev structures are deleted while
the file operation functions are still running. If the 0 address is
mappable on the machine, this vulnerability can be used to create a
Local Priviege Escalation exploit via a write-what-where condition by
remapping dev->interrupt_out_buffer in tower_write. A forged USB device
and local program execution would be required for LPE. The USB device
would have to delay the control message in tower_probe and accept
the control urb in tower_open whilst guest code initiated a write to the
device file as tower_delete is called from the error in tower_probe.

This bug has existed since 2003. Patch tested by emulated device.

Reported-by: James Patrick-Evans <james@jmp-e.com>
Tested-by: James Patrick-Evans <james@jmp-e.com>
Signed-off-by: James Patrick-Evans <james@jmp-e.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/misc/legousbtower.c |   35 +++++++++++++++++------------------
 1 file changed, 17 insertions(+), 18 deletions(-)

--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -898,24 +898,6 @@ static int tower_probe (struct usb_inter
 	dev->interrupt_in_interval = interrupt_in_interval ? interrupt_in_interval : dev->interrupt_in_endpoint->bInterval;
 	dev->interrupt_out_interval = interrupt_out_interval ? interrupt_out_interval : dev->interrupt_out_endpoint->bInterval;
 
-	/* we can register the device now, as it is ready */
-	usb_set_intfdata (interface, dev);
-
-	retval = usb_register_dev (interface, &tower_class);
-
-	if (retval) {
-		/* something prevented us from registering this driver */
-		dev_err(idev, "Not able to get a minor for this device.\n");
-		usb_set_intfdata (interface, NULL);
-		goto error;
-	}
-	dev->minor = interface->minor;
-
-	/* let the user know what node this device is now attached to */
-	dev_info(&interface->dev, "LEGO USB Tower #%d now attached to major "
-		 "%d minor %d\n", (dev->minor - LEGO_USB_TOWER_MINOR_BASE),
-		 USB_MAJOR, dev->minor);
-
 	/* get the firmware version and log it */
 	result = usb_control_msg (udev,
 				  usb_rcvctrlpipe(udev, 0),
@@ -936,6 +918,23 @@ static int tower_probe (struct usb_inter
 		 get_version_reply.minor,
 		 le16_to_cpu(get_version_reply.build_no));
 
+	/* we can register the device now, as it is ready */
+	usb_set_intfdata (interface, dev);
+
+	retval = usb_register_dev (interface, &tower_class);
+
+	if (retval) {
+		/* something prevented us from registering this driver */
+		dev_err(idev, "Not able to get a minor for this device.\n");
+		usb_set_intfdata (interface, NULL);
+		goto error;
+	}
+	dev->minor = interface->minor;
+
+	/* let the user know what node this device is now attached to */
+	dev_info(&interface->dev, "LEGO USB Tower #%d now attached to major "
+		 "%d minor %d\n", (dev->minor - LEGO_USB_TOWER_MINOR_BASE),
+		 USB_MAJOR, dev->minor);
 
 exit:
 	return retval;

[PATCH 4.4 87/93] Staging: fbtft: Fix bug in fbtft-core

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>

commit fc1e2c8ea85e109acf09e74789e9b852f6eed251 upstream.

Commit 367e8560e8d7a62d96e9b1d644028a3816e04206 introduced a bug
in fbtft-core where fps is always 0, this is because variable
update_time is not assigned correctly.

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Fixes: 367e8560e8d7 ("Staging: fbtbt: Replace timespec with ktime_t")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/fbtft/fbtft-core.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/staging/fbtft/fbtft-core.c
+++ b/drivers/staging/fbtft/fbtft-core.c
@@ -392,11 +392,11 @@ static void fbtft_update_display(struct
 
 	if (unlikely(timeit)) {
 		ts_end = ktime_get();
-		if (ktime_to_ns(par->update_time))
+		if (!ktime_to_ns(par->update_time))
 			par->update_time = ts_start;
 
-		par->update_time = ts_start;
 		fps = ktime_us_delta(ts_start, par->update_time);
+		par->update_time = ts_start;
 		fps = fps ? 1000000 / fps : 0;
 
 		throughput = ktime_us_delta(ts_end, ts_start);

[PATCH 4.4 88/93] USB: serial: cp210x: Add ID for a Juniper console

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kyle Jones <kyle@kf5jwc.us>

commit decc5360f23e9efe0252094f47f57f254dcbb3a9 upstream.

Signed-off-by: Kyle Jones <kyle@kf5jwc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -117,6 +117,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
 	{ USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
+	{ USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */
 	{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
 	{ USB_DEVICE(0x10C4, 0x84B6) }, /* Starizona Hyperion */
 	{ USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */

[PATCH 4.4 89/93] Revert "usbtmc: convert to devm_kzalloc"

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ab21b63e8aedfc73565dd9cdd51eb338341177cb upstream.

This reverts commit e6c7efdcb76f11b04e3d3f71c8d764ab75c9423b.

Turns out it was totally wrong.  The memory is supposed to be bound to
the kref, as the original code was doing correctly, not the
device/driver binding as the devm_kzalloc() would cause.

This fixes an oops when read would be called after the device was
unbound from the driver.

Reported-by: Ladislav Michl <ladis@linux-mips.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/usbtmc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -121,6 +121,7 @@ static void usbtmc_delete(struct kref *k
 	struct usbtmc_device_data *data = to_usbtmc_data(kref);
 
 	usb_put_dev(data->usb_dev);
+	kfree(data);
 }
 
 static int usbtmc_open(struct inode *inode, struct file *filp)
@@ -1104,7 +1105,7 @@ static int usbtmc_probe(struct usb_inter
 
 	dev_dbg(&intf->dev, "%s called\n", __func__);
 
-	data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL);
+	data = kmalloc(sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 

[PATCH 4.4 90/93] ALSA: hda - Adding one more ALC255 pin definition for headset problem

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hui Wang <hui.wang@canonical.com>

commit 392c9da24a994f238c5d7ea611c6245be4617014 upstream.

We have two new Dell laptop models, they have the same ALC255 pin
definition, but not in the pin quirk table yet, as a result, the
headset microphone can't work. After adding the definition in the
table, the headset microphone works well.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5830,6 +5830,10 @@ static const struct snd_hda_pin_quirk al
 		{0x14, 0x90170120},
 		{0x21, 0x02211030}),
 	SND_HDA_PIN_QUIRK(0x10ec0255, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE,
+		{0x14, 0x90170110},
+		{0x1b, 0x02011020},
+		{0x21, 0x0221101f}),
+	SND_HDA_PIN_QUIRK(0x10ec0255, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE,
 		{0x14, 0x90170130},
 		{0x1b, 0x01014020},
 		{0x21, 0x0221103f}),

[PATCH 4.4 91/93] ACPICA: acpi_get_sleep_type_data: Reduce warnings

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Prarit Bhargava <prarit@redhat.com>

commit a59b679ab85635737947310323f2f2bcfa0664a7 upstream.

ACPICA commit 7bb77313091e52a846df4c9c2bea90be31bfb9d8

Eliminate warnings for "not found" _Sx errors, since these
are optional. Original NOT_FOUND status is still returned.

Original changes by Prarit Bhargava.
ACPICA BZ 1208.

Link: https://github.com/acpica/acpica/commit/7bb77313
Link: https://bugs.acpica.org/show_bug.cgi?id=1208
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Charles (Chas) Williams" <ciwillia@brocade.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/acpica/hwxface.c |   24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

--- a/drivers/acpi/acpica/hwxface.c
+++ b/drivers/acpi/acpica/hwxface.c
@@ -504,11 +504,20 @@ acpi_get_sleep_type_data(u8 sleep_state,
 	 * Evaluate the \_Sx namespace object containing the register values
 	 * for this state
 	 */
-	info->relative_pathname =
-	    ACPI_CAST_PTR(char, acpi_gbl_sleep_state_names[sleep_state]);
+	info->relative_pathname = ACPI_CAST_PTR(char,
+						acpi_gbl_sleep_state_names
+						[sleep_state]);
+
 	status = acpi_ns_evaluate(info);
 	if (ACPI_FAILURE(status)) {
-		goto cleanup;
+		if (status == AE_NOT_FOUND) {
+
+			/* The _Sx states are optional, ignore NOT_FOUND */
+
+			goto final_cleanup;
+		}
+
+		goto warning_cleanup;
 	}
 
 	/* Must have a return object */
@@ -517,7 +526,7 @@ acpi_get_sleep_type_data(u8 sleep_state,
 		ACPI_ERROR((AE_INFO, "No Sleep State object returned from [%s]",
 			    info->relative_pathname));
 		status = AE_AML_NO_RETURN_VALUE;
-		goto cleanup;
+		goto warning_cleanup;
 	}
 
 	/* Return object must be of type Package */
@@ -526,7 +535,7 @@ acpi_get_sleep_type_data(u8 sleep_state,
 		ACPI_ERROR((AE_INFO,
 			    "Sleep State return object is not a Package"));
 		status = AE_AML_OPERAND_TYPE;
-		goto cleanup1;
+		goto return_value_cleanup;
 	}
 
 	/*
@@ -570,16 +579,17 @@ acpi_get_sleep_type_data(u8 sleep_state,
 		break;
 	}
 
-cleanup1:
+return_value_cleanup:
 	acpi_ut_remove_reference(info->return_object);
 
-cleanup:
+warning_cleanup:
 	if (ACPI_FAILURE(status)) {
 		ACPI_EXCEPTION((AE_INFO, status,
 				"While evaluating Sleep State [%s]",
 				info->relative_pathname));
 	}
 
+final_cleanup:
 	ACPI_FREE(info);
 	return_ACPI_STATUS(status);
 }

[PATCH 4.4 92/93] ALSA: hda - Fix headset mic detection problem for several Dell laptops

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hui Wang <hui.wang@canonical.com>

commit 3f640970a41429f0a076c01270bbd014c9eae61c upstream.

One of the laptops has the codec ALC256 on it, applying the
ALC255_FIXUP_DELL1_MIC_NO_PRESENCE can fix the problem, the rest
of laptops have the codec ALC295 on them, they are similar to machines
with ALC225, applying the ALC269_FIXUP_DELL1_MIC_NO_PRESENCE can fix
the problem.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5790,6 +5790,13 @@ static const struct hda_model_fixup alc2
 	{0x14, 0x90170110}, \
 	{0x15, 0x0221401f}
 
+#define ALC295_STANDARD_PINS \
+	{0x12, 0xb7a60130}, \
+	{0x14, 0x90170110}, \
+	{0x17, 0x21014020}, \
+	{0x18, 0x21a19030}, \
+	{0x21, 0x04211020}
+
 #define ALC298_STANDARD_PINS \
 	{0x12, 0x90a60130}, \
 	{0x21, 0x03211020}
@@ -5899,6 +5906,10 @@ static const struct snd_hda_pin_quirk al
 		{0x14, 0x90170120},
 		{0x21, 0x02211030}),
 	SND_HDA_PIN_QUIRK(0x10ec0256, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE,
+		{0x12, 0xb7a60130},
+		{0x14, 0x90170110},
+		{0x21, 0x02211020}),
+	SND_HDA_PIN_QUIRK(0x10ec0256, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE,
 		ALC256_STANDARD_PINS),
 	SND_HDA_PIN_QUIRK(0x10ec0280, 0x103c, "HP", ALC280_FIXUP_HP_GPIO4,
 		{0x12, 0x90a60130},
@@ -6009,6 +6020,8 @@ static const struct snd_hda_pin_quirk al
 	SND_HDA_PIN_QUIRK(0x10ec0293, 0x1028, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE,
 		ALC292_STANDARD_PINS,
 		{0x13, 0x90a60140}),
+	SND_HDA_PIN_QUIRK(0x10ec0295, 0x1028, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE,
+		ALC295_STANDARD_PINS),
 	SND_HDA_PIN_QUIRK(0x10ec0298, 0x1028, "Dell", ALC298_FIXUP_DELL1_MIC_NO_PRESENCE,
 		ALC298_STANDARD_PINS,
 		{0x17, 0x90170110}),

[PATCH 4.4 93/93] ALSA: hda - Add the top speaker pin config for HP Spectre x360

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 0eec880966e77bdbee0112989a2be67d92e39929 upstream.

HP Spectre x360 with CX20724 codec has two speaker outputs while the
BIOS sets up only the bottom one (NID 0x17) and disables the top one
(NID 0x1d).

This patch adds a fixup simply defining the proper pincfg for NID 0x1d
so that the top speaker works as is.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=169071
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_conexant.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -261,6 +261,7 @@ enum {
 	CXT_FIXUP_HP_530,
 	CXT_FIXUP_CAP_MIX_AMP_5047,
 	CXT_FIXUP_MUTE_LED_EAPD,
+	CXT_FIXUP_HP_SPECTRE,
 };
 
 /* for hda_fixup_thinkpad_acpi() */
@@ -765,6 +766,14 @@ static const struct hda_fixup cxt_fixups
 		.type = HDA_FIXUP_FUNC,
 		.v.func = cxt_fixup_mute_led_eapd,
 	},
+	[CXT_FIXUP_HP_SPECTRE] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			/* enable NID 0x1d for the speaker on top */
+			{ 0x1d, 0x91170111 },
+			{ }
+		}
+	},
 };
 
 static const struct snd_pci_quirk cxt5045_fixups[] = {
@@ -814,6 +823,7 @@ static const struct snd_pci_quirk cxt506
 	SND_PCI_QUIRK(0x1025, 0x0543, "Acer Aspire One 522", CXT_FIXUP_STEREO_DMIC),
 	SND_PCI_QUIRK(0x1025, 0x054c, "Acer Aspire 3830TG", CXT_FIXUP_ASPIRE_DMIC),
 	SND_PCI_QUIRK(0x1025, 0x054f, "Acer Aspire 4830T", CXT_FIXUP_ASPIRE_DMIC),
+	SND_PCI_QUIRK(0x103c, 0x8174, "HP Spectre x360", CXT_FIXUP_HP_SPECTRE),
 	SND_PCI_QUIRK(0x1043, 0x138d, "Asus", CXT_FIXUP_HEADPHONE_MIC_PIN),
 	SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT_FIXUP_OLPC_XO),
 	SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400", CXT_PINCFG_LENOVO_TP410),

Re: [PATCH 4.4 00/93] 4.4.24-stable review

[Guenter Roeck]

On Thu, Oct 06, 2016 at 10:28:30AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.24 release.
> There are 93 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat Oct  8 07:47:15 UTC 2016.
> Anything received after that time might be too late.
> 
Build results:
	total: 149 pass: 149 fail: 0
Qemu test results:
	total: 101 pass: 101 fail: 0

Details are available at http://kerneltests.org/builders.

Guenter

Re: [PATCH 4.4 00/93] 4.4.24-stable review

[Shuah Khan]

On 10/06/2016 02:28 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.24 release.
> There are 93 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat Oct  8 07:47:15 UTC 2016.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.24-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions,

thanks,
-- Shuah

-- 
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America(Silicon Valley)
shuah.kh@samsung.com

Re: [PATCH 4.4 00/93] 4.4.24-stable review

[Greg Kroah-Hartman]

On Fri, Oct 07, 2016 at 04:06:04AM -0700, kernelci.org bot wrote:
> stable-rc boot: 164 boots: 1 failed, 158 passed with 5 offline (v4.4.23-94-g5dba8e95fccc)
> 
> Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/kernel/v4.4.23-94-g5dba8e95fccc/
> Full Build Summary: https://kernelci.org/build/stable-rc/kernel/v4.4.23-94-g5dba8e95fccc/
> 
> Tree: stable-rc
> Branch: local/linux-4.4.y
> Git Describe: v4.4.23-94-g5dba8e95fccc
> Git Commit: 5dba8e95fccc45d6934b70128e6ce72e4cbc44e1
> Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> Tested: 41 unique boards, 13 SoC families, 22 builds out of 201
> 
> Boot Failure Detected: https://kernelci.org/boot/?v4.4.23-94-g5dba8e95fccc&fail
> 
> arm:
> 
>     multi_v7_defconfig+CONFIG_PROVE_LOCKING=y:
>         at91-sama5d3_xplained: 1 failed lab

Yeah, same failure!

thanks for the report,

greg k-h

Re: [PATCH 4.4 00/93] 4.4.24-stable review

[Kevin Hilman]

Greg Kroah-Hartman <gregkh@linuxfoundation.org> writes:

> On Fri, Oct 07, 2016 at 04:06:04AM -0700, kernelci.org bot wrote:
>> stable-rc boot: 164 boots: 1 failed, 158 passed with 5 offline (v4.4.23-94-g5dba8e95fccc)
>> 
>> Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/kernel/v4.4.23-94-g5dba8e95fccc/
>> Full Build Summary: https://kernelci.org/build/stable-rc/kernel/v4.4.23-94-g5dba8e95fccc/
>> 
>> Tree: stable-rc
>> Branch: local/linux-4.4.y
>> Git Describe: v4.4.23-94-g5dba8e95fccc
>> Git Commit: 5dba8e95fccc45d6934b70128e6ce72e4cbc44e1
>> Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
>> Tested: 41 unique boards, 13 SoC families, 22 builds out of 201
>> 
>> Boot Failure Detected: https://kernelci.org/boot/?v4.4.23-94-g5dba8e95fccc&fail
>> 
>> arm:
>> 
>>     multi_v7_defconfig+CONFIG_PROVE_LOCKING=y:
>>         at91-sama5d3_xplained: 1 failed lab
>
> Yeah, same failure!
>
> thanks for the report,

Pretty sure this one is related to the bootloader settings not properly
dealing with the larger image size created by CONFIG_PROVE_LOCKING=y,
but still waiting for the Free Electrons guys (cc'd) to have a closer look.

Kevin