* [PATCH v2] pinctrl: qcom: sa8775p: add the wakeirq map
@ 2023-05-15 9:25 Bartosz Golaszewski
2023-05-15 9:32 ` Konrad Dybcio
2023-05-22 7:28 ` Linus Walleij
0 siblings, 2 replies; 3+ messages in thread
From: Bartosz Golaszewski @ 2023-05-15 9:25 UTC (permalink / raw)
To: Bjorn Andersson, Andy Gross, Konrad Dybcio, Linus Walleij
Cc: linux-arm-msm, linux-gpio, linux-kernel, Bartosz Golaszewski
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The SA8775P TLMM driver is missing the GPIO-to-wakeup-pin mapping. This
adds it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
v1 -> v2:
- fix the 30->200 mapping
drivers/pinctrl/qcom/pinctrl-sa8775p.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/pinctrl/qcom/pinctrl-sa8775p.c b/drivers/pinctrl/qcom/pinctrl-sa8775p.c
index 2ae7cdca65d3..6ea0197b36c6 100644
--- a/drivers/pinctrl/qcom/pinctrl-sa8775p.c
+++ b/drivers/pinctrl/qcom/pinctrl-sa8775p.c
@@ -1491,6 +1491,23 @@ static const struct msm_pingroup sa8775p_groups[] = {
[153] = SDC_QDSD_PINGROUP(sdc1_data, 0x199000, 9, 0),
};
+static const struct msm_gpio_wakeirq_map sa8775p_pdc_map[] = {
+ { 0, 169 }, { 1, 174 }, { 2, 170 }, { 3, 175 }, { 4, 171 }, { 5, 173 },
+ { 6, 172 }, { 7, 182 }, { 10, 220 }, { 11, 213 }, { 12, 221 },
+ { 16, 230 }, { 19, 231 }, { 20, 232 }, { 23, 233 }, { 24, 234 },
+ { 26, 223 }, { 27, 235 }, { 28, 209 }, { 29, 176 }, { 30, 200 },
+ { 31, 201 }, { 32, 212 }, { 35, 177 }, { 36, 178 }, { 39, 184 },
+ { 40, 185 }, { 41, 227 }, { 42, 186 }, { 43, 228 }, { 45, 187 },
+ { 47, 188 }, { 48, 194 }, { 51, 195 }, { 52, 196 }, { 55, 197 },
+ { 56, 198 }, { 57, 236 }, { 58, 192 }, { 59, 193 }, { 72, 179 },
+ { 73, 180 }, { 74, 181 }, { 75, 202 }, { 76, 183 }, { 77, 189 },
+ { 78, 190 }, { 79, 191 }, { 80, 199 }, { 83, 204 }, { 84, 205 },
+ { 85, 229 }, { 86, 206 }, { 89, 207 }, { 91, 208 }, { 94, 214 },
+ { 95, 215 }, { 96, 237 }, { 97, 216 }, { 98, 238 }, { 99, 217 },
+ { 100, 239 }, { 105, 219 }, { 106, 210 }, { 107, 211 }, { 108, 222 },
+ { 109, 203 }, { 145, 225 }, { 146, 226 },
+};
+
static const struct msm_pinctrl_soc_data sa8775p_pinctrl = {
.pins = sa8775p_pins,
.npins = ARRAY_SIZE(sa8775p_pins),
@@ -1499,6 +1516,8 @@ static const struct msm_pinctrl_soc_data sa8775p_pinctrl = {
.groups = sa8775p_groups,
.ngroups = ARRAY_SIZE(sa8775p_groups),
.ngpios = 150,
+ .wakeirq_map = sa8775p_pdc_map,
+ .nwakeirq_map = ARRAY_SIZE(sa8775p_pdc_map),
};
static int sa8775p_pinctrl_probe(struct platform_device *pdev)
--
2.39.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2] pinctrl: qcom: sa8775p: add the wakeirq map
2023-05-15 9:25 [PATCH v2] pinctrl: qcom: sa8775p: add the wakeirq map Bartosz Golaszewski
@ 2023-05-15 9:32 ` Konrad Dybcio
2023-05-22 7:28 ` Linus Walleij
1 sibling, 0 replies; 3+ messages in thread
From: Konrad Dybcio @ 2023-05-15 9:32 UTC (permalink / raw)
To: Bartosz Golaszewski, Bjorn Andersson, Andy Gross, Linus Walleij
Cc: linux-arm-msm, linux-gpio, linux-kernel, Bartosz Golaszewski
On 15.05.2023 11:25, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> The SA8775P TLMM driver is missing the GPIO-to-wakeup-pin mapping. This
> adds it.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> v1 -> v2:
> - fix the 30->200 mapping
>
> drivers/pinctrl/qcom/pinctrl-sa8775p.c | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/drivers/pinctrl/qcom/pinctrl-sa8775p.c b/drivers/pinctrl/qcom/pinctrl-sa8775p.c
> index 2ae7cdca65d3..6ea0197b36c6 100644
> --- a/drivers/pinctrl/qcom/pinctrl-sa8775p.c
> +++ b/drivers/pinctrl/qcom/pinctrl-sa8775p.c
> @@ -1491,6 +1491,23 @@ static const struct msm_pingroup sa8775p_groups[] = {
> [153] = SDC_QDSD_PINGROUP(sdc1_data, 0x199000, 9, 0),
> };
>
> +static const struct msm_gpio_wakeirq_map sa8775p_pdc_map[] = {
> + { 0, 169 }, { 1, 174 }, { 2, 170 }, { 3, 175 }, { 4, 171 }, { 5, 173 },
> + { 6, 172 }, { 7, 182 }, { 10, 220 }, { 11, 213 }, { 12, 221 },
> + { 16, 230 }, { 19, 231 }, { 20, 232 }, { 23, 233 }, { 24, 234 },
> + { 26, 223 }, { 27, 235 }, { 28, 209 }, { 29, 176 }, { 30, 200 },
> + { 31, 201 }, { 32, 212 }, { 35, 177 }, { 36, 178 }, { 39, 184 },
> + { 40, 185 }, { 41, 227 }, { 42, 186 }, { 43, 228 }, { 45, 187 },
> + { 47, 188 }, { 48, 194 }, { 51, 195 }, { 52, 196 }, { 55, 197 },
> + { 56, 198 }, { 57, 236 }, { 58, 192 }, { 59, 193 }, { 72, 179 },
> + { 73, 180 }, { 74, 181 }, { 75, 202 }, { 76, 183 }, { 77, 189 },
> + { 78, 190 }, { 79, 191 }, { 80, 199 }, { 83, 204 }, { 84, 205 },
> + { 85, 229 }, { 86, 206 }, { 89, 207 }, { 91, 208 }, { 94, 214 },
> + { 95, 215 }, { 96, 237 }, { 97, 216 }, { 98, 238 }, { 99, 217 },
> + { 100, 239 }, { 105, 219 }, { 106, 210 }, { 107, 211 }, { 108, 222 },
> + { 109, 203 }, { 145, 225 }, { 146, 226 },
> +};
> +
> static const struct msm_pinctrl_soc_data sa8775p_pinctrl = {
> .pins = sa8775p_pins,
> .npins = ARRAY_SIZE(sa8775p_pins),
> @@ -1499,6 +1516,8 @@ static const struct msm_pinctrl_soc_data sa8775p_pinctrl = {
> .groups = sa8775p_groups,
> .ngroups = ARRAY_SIZE(sa8775p_groups),
> .ngpios = 150,
> + .wakeirq_map = sa8775p_pdc_map,
> + .nwakeirq_map = ARRAY_SIZE(sa8775p_pdc_map),
> };
>
> static int sa8775p_pinctrl_probe(struct platform_device *pdev)
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] pinctrl: qcom: sa8775p: add the wakeirq map
2023-05-15 9:25 [PATCH v2] pinctrl: qcom: sa8775p: add the wakeirq map Bartosz Golaszewski
2023-05-15 9:32 ` Konrad Dybcio
@ 2023-05-22 7:28 ` Linus Walleij
1 sibling, 0 replies; 3+ messages in thread
From: Linus Walleij @ 2023-05-22 7:28 UTC (permalink / raw)
To: Bartosz Golaszewski
Cc: Bjorn Andersson, Andy Gross, Konrad Dybcio, linux-arm-msm,
linux-gpio, linux-kernel, Bartosz Golaszewski
On Mon, May 15, 2023 at 11:25 AM Bartosz Golaszewski <brgl@bgdev.pl> wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> The SA8775P TLMM driver is missing the GPIO-to-wakeup-pin mapping. This
> adds it.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
> v1 -> v2:
> - fix the 30->200 mapping
Patch applied!
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-05-22 7:29 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-05-15 9:25 [PATCH v2] pinctrl: qcom: sa8775p: add the wakeirq map Bartosz Golaszewski
2023-05-15 9:32 ` Konrad Dybcio
2023-05-22 7:28 ` Linus Walleij
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).