From: Michal Kubecek <mkubecek@suse.cz>
To: David Miller <davem@davemloft.net>, netdev@vger.kernel.org
Cc: Jakub Kicinski <kuba@kernel.org>, Jiri Pirko <jiri@resnulli.us>,
Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
John Linville <linville@tuxdriver.com>,
Johannes Berg <johannes@sipsolutions.net>,
linux-kernel@vger.kernel.org
Subject: [PATCH net-next 3/7] ethtool: set message mask with DEBUG_SET request
Date: Sun, 26 Jan 2020 23:11:07 +0100 (CET) [thread overview]
Message-ID: <844bf6bf518640fbfc67b5dd7976d9e8683c2d2d.1580075977.git.mkubecek@suse.cz> (raw)
In-Reply-To: <cover.1580075977.git.mkubecek@suse.cz>
Implement DEBUG_SET netlink request to set debugging settings for a device.
At the moment, only message mask corresponding to message level as set by
ETHTOOL_SMSGLVL ioctl request can be set. (It is called message level in
ioctl interface but almost all drivers interpret it as a bit mask.)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
---
Documentation/networking/ethtool-netlink.rst | 20 +++++++-
include/uapi/linux/ethtool_netlink.h | 1 +
net/ethtool/debug.c | 53 ++++++++++++++++++++
net/ethtool/netlink.c | 5 ++
net/ethtool/netlink.h | 1 +
5 files changed, 79 insertions(+), 1 deletion(-)
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index 76a411d3102d..58473c05319f 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -186,6 +186,7 @@ Userspace to kernel:
``ETHTOOL_MSG_LINKMODES_SET`` set link modes info
``ETHTOOL_MSG_LINKSTATE_GET`` get link state
``ETHTOOL_MSG_DEBUG_GET`` get debugging settings
+ ``ETHTOOL_MSG_DEBUG_SET`` set debugging settings
===================================== ================================
Kernel to userspace:
@@ -455,6 +456,23 @@ interface follows its actual use in practice.
devices supporting the request).
+DEBUG_SET
+=========
+
+Set or update debugging settings of a device. At the moment, only message mask
+is supported.
+
+Request contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_DEBUG_HEADER`` nested request header
+ ``ETHTOOL_A_DEBUG_MSGMASK`` bitset message mask
+ ==================================== ====== ==========================
+
+``ETHTOOL_A_DEBUG_MSGMASK`` bit set allows setting or modifying mask of
+enabled debugging message types for the device.
+
+
Request translation
===================
@@ -474,7 +492,7 @@ have their netlink replacement yet.
``ETHTOOL_GWOL`` n/a
``ETHTOOL_SWOL`` n/a
``ETHTOOL_GMSGLVL`` ``ETHTOOL_MSG_DEBUG_GET``
- ``ETHTOOL_SMSGLVL`` n/a
+ ``ETHTOOL_SMSGLVL`` ``ETHTOOL_MSG_DEBUG_SET``
``ETHTOOL_NWAY_RST`` n/a
``ETHTOOL_GLINK`` ``ETHTOOL_MSG_LINKSTATE_GET``
``ETHTOOL_GEEPROM`` n/a
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index 0d39e04567cb..8f0b6fd277d5 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -21,6 +21,7 @@ enum {
ETHTOOL_MSG_LINKMODES_SET,
ETHTOOL_MSG_LINKSTATE_GET,
ETHTOOL_MSG_DEBUG_GET,
+ ETHTOOL_MSG_DEBUG_SET,
/* add new constants above here */
__ETHTOOL_MSG_USER_CNT,
diff --git a/net/ethtool/debug.c b/net/ethtool/debug.c
index cc121a23be5f..6fc3ef8113c0 100644
--- a/net/ethtool/debug.c
+++ b/net/ethtool/debug.c
@@ -78,3 +78,56 @@ const struct ethnl_request_ops ethnl_debug_request_ops = {
.reply_size = debug_reply_size,
.fill_reply = debug_fill_reply,
};
+
+/* DEBUG_SET */
+
+static const struct nla_policy
+debug_set_policy[ETHTOOL_A_DEBUG_MAX + 1] = {
+ [ETHTOOL_A_DEBUG_UNSPEC] = { .type = NLA_REJECT },
+ [ETHTOOL_A_DEBUG_HEADER] = { .type = NLA_NESTED },
+ [ETHTOOL_A_DEBUG_MSGMASK] = { .type = NLA_NESTED },
+};
+
+int ethnl_set_debug(struct sk_buff *skb, struct genl_info *info)
+{
+ struct nlattr *tb[ETHTOOL_A_DEBUG_MAX + 1];
+ struct ethnl_req_info req_info = {};
+ struct net_device *dev;
+ bool mod = false;
+ u32 msg_mask;
+ int ret;
+
+ ret = nlmsg_parse(info->nlhdr, GENL_HDRLEN, tb,
+ ETHTOOL_A_DEBUG_MAX, debug_set_policy,
+ info->extack);
+ if (ret < 0)
+ return ret;
+ ret = ethnl_parse_header(&req_info, tb[ETHTOOL_A_DEBUG_HEADER],
+ genl_info_net(info), info->extack, true);
+ if (ret < 0)
+ return ret;
+ dev = req_info.dev;
+ if (!dev->ethtool_ops->get_msglevel || !dev->ethtool_ops->set_msglevel)
+ return -EOPNOTSUPP;
+
+ rtnl_lock();
+ ret = ethnl_ops_begin(dev);
+ if (ret < 0)
+ goto out_rtnl;
+
+ msg_mask = dev->ethtool_ops->get_msglevel(dev);
+ ret = ethnl_update_bitset32(&msg_mask, NETIF_MSG_CLASS_COUNT,
+ tb[ETHTOOL_A_DEBUG_MSGMASK],
+ netif_msg_class_names, info->extack, &mod);
+ if (ret < 0 || !mod)
+ goto out_ops;
+
+ dev->ethtool_ops->set_msglevel(dev, msg_mask);
+
+out_ops:
+ ethnl_ops_complete(dev);
+out_rtnl:
+ rtnl_unlock();
+ dev_put(dev);
+ return ret;
+}
diff --git a/net/ethtool/netlink.c b/net/ethtool/netlink.c
index bdaf583e392b..bcdc42e0bd14 100644
--- a/net/ethtool/netlink.c
+++ b/net/ethtool/netlink.c
@@ -672,6 +672,11 @@ static const struct genl_ops ethtool_genl_ops[] = {
.dumpit = ethnl_default_dumpit,
.done = ethnl_default_done,
},
+ {
+ .cmd = ETHTOOL_MSG_DEBUG_SET,
+ .flags = GENL_UNS_ADMIN_PERM,
+ .doit = ethnl_set_debug,
+ },
};
static const struct genl_multicast_group ethtool_nl_mcgrps[] = {
diff --git a/net/ethtool/netlink.h b/net/ethtool/netlink.h
index 9bd8ef671501..772723e536e8 100644
--- a/net/ethtool/netlink.h
+++ b/net/ethtool/netlink.h
@@ -338,5 +338,6 @@ extern const struct ethnl_request_ops ethnl_debug_request_ops;
int ethnl_set_linkinfo(struct sk_buff *skb, struct genl_info *info);
int ethnl_set_linkmodes(struct sk_buff *skb, struct genl_info *info);
+int ethnl_set_debug(struct sk_buff *skb, struct genl_info *info);
#endif /* _NET_ETHTOOL_NETLINK_H */
--
2.25.0
next prev parent reply other threads:[~2020-01-26 22:11 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-26 22:10 [PATCH net-next 0/7] ethtool netlink interface, part 2 Michal Kubecek
2020-01-26 22:11 ` [PATCH net-next 1/7] ethtool: fix kernel-doc descriptions Michal Kubecek
2020-01-26 22:11 ` [PATCH net-next 2/7] ethtool: provide message mask with DEBUG_GET request Michal Kubecek
2020-01-26 23:52 ` Andrew Lunn
2020-01-26 22:11 ` Michal Kubecek [this message]
2020-01-27 0:22 ` [PATCH net-next 3/7] ethtool: set message mask with DEBUG_SET request Andrew Lunn
2020-01-27 6:23 ` Michal Kubecek
2020-01-27 1:04 ` Andrew Lunn
2020-01-27 6:24 ` Michal Kubecek
2020-01-26 22:11 ` [PATCH net-next 4/7] ethtool: add DEBUG_NTF notification Michal Kubecek
2020-01-27 1:17 ` Andrew Lunn
2020-01-26 22:11 ` [PATCH net-next 5/7] ethtool: provide WoL settings with WOL_GET request Michal Kubecek
2020-01-27 2:11 ` Andrew Lunn
2020-01-26 22:11 ` [PATCH net-next 6/7] ethtool: set wake-on-lan settings with WOL_SET request Michal Kubecek
2020-01-26 22:11 ` [PATCH net-next 7/7] ethtool: add WOL_NTF notification Michal Kubecek
2020-01-26 23:34 ` [PATCH net-next 0/7] ethtool netlink interface, part 2 Andrew Lunn
2020-01-27 7:30 ` Michal Kubecek
2020-01-27 9:40 ` David Miller
2020-01-27 9:57 ` Michal Kubecek
2020-01-27 10:27 ` David Miller
2020-01-27 10:32 ` David Miller
2020-01-27 13:45 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=844bf6bf518640fbfc67b5dd7976d9e8683c2d2d.1580075977.git.mkubecek@suse.cz \
--to=mkubecek@suse.cz \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=jiri@resnulli.us \
--cc=johannes@sipsolutions.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).