[REGRESSION] 3.13-rc2: locks up hard on trying to transfer a file to mmc based internal SD card slot

[REGRESSION] 3.13-rc2: locks up hard on trying to transfer a file to mmc based internal SD card slot

[Martin Steigerwald]

Hi!

Just does that on a ThinkPad T520 with:

merkaba:~> lspci -nn | grep MMC
0d:00.0 System peripheral [0880]: Ricoh Co Ltd PCIe SDXC/MMC Host Controller 
[1180:e823] (rev 08)

Mouse pointer freezes, no Ctrl-Alt-F1.


merkaba:~> fdisk -l /dev/mmcblk0

Disk /dev/mmcblk0: 31.4 GB, 31439454208 bytes
255 heads, 63 sectors/track, 3822 cylinders, total 61405184 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

        Device Boot      Start         End      Blocks   Id  System
/dev/mmcblk0p1            8192    61405183    30698496    c  W95 FAT32 (LBA


merkaba:/sys/block/mmcblk0#2> grep . * 2>/dev/null
alignment_offset:0
capability:10
dev:179:0
discard_alignment:0
ext_range:8
force_ro:0
inflight:       0        0
range:8
removable:0
ro:0
size:61405184
stat:     176       33     1672      102        0        0        0        0        
0      102      102
uevent:MAJOR=179
uevent:MINOR=0
uevent:DEVNAME=mmcblk0
uevent:DEVTYPE=disk


I do not want to take the time to diagnose this further, especially as its one 
of those nasty "I just lock up and I don´t tell you what went wrong" kind of 
bugs. Thats just not a nice way to tell that there has been an error.


If there is any five or ten minute information gathering task, I am willing to 
provide more information, but right now there is no chance on Earth that I 
will be bisecting while having a long list of more interesting things to do 
than that.


Thus for now I just use 3.12 kernel again. Maybe I will try with some rc5 or 
so again.

Ciao,
-- 
Martin 'Helios' Steigerwald - http://www.Lichtvoll.de
GPG: 03B0 0D6C 0040 0710 4AFA  B82F 991B EAAC A599 84C7

Re: [REGRESSION] 3.13-rc2: locks up hard on trying to transfer a file to mmc based internal SD card slot

[Martin Steigerwald]

[-- Attachment #1: Type: text/plain, Size: 5857 bytes --]

Am Dienstag, 31. Dezember 2013, 13:41:22 schrieb Martin Steigerwald:
> Am Samstag, 30. November 2013, 14:53:51 schrieb Martin Steigerwald:
> > Just added linux-mmc. And I might git-bisect that at some time, but I do
> > not intend to do it during my precious weekend. The chances of me
> > bisecting it increase with workable suggestions on how to cut down the
> > amount of iterations needed and avoid testing highly experimental between
> > 3.12 and 3.13-rc1 kernels on a production laptop. I may be willing to
> > test a patch or two. As I see there seem to have been quite some changes
> > in MMC subsystem.
> > 
> > 
> > 
> > 
> > Hi!
> > 
> > Just does that on a ThinkPad T520 with:
> > 
> > merkaba:~> lspci -nn | grep MMC
> > 0d:00.0 System peripheral [0880]: Ricoh Co Ltd PCIe SDXC/MMC Host
> > Controller [1180:e823] (rev 08)
> > 
> > Mouse pointer freezes, no Ctrl-Alt-F1.
> 
> It just does that with
> 
> Linux version 3.13.0-rc6-tp520 (martin@merkaba) (gcc version 4.8.2 (Debian
> 4.8.2-10) ) #41 SMP PREEMPT Mon Dec 30 13:39:07 CET 2013
> 
> as well.

I missed some important data. Kernel runs with threadirqs:

merkaba:~> cat /proc/cmdline 
BOOT_IMAGE=/vmlinuz-3.12.6-tp520 
root=UUID=2f5c334d-249b-4c89-95cc-18572f750bd7 ro rootflags=subvol=root 
resume=/dev/mapper/merkaba-swap threadirqs i915_enable_rc6=7

Oh, and I see i915_enable_rc6=7. This always worked flawlessly. But maybe this 
changed? Cause according to powertop the GPU never entered deeper sleep states 
anyway. Maybe this now works (and thus may hang)?

These are values on 3.12.6:

                    |             GPU     |
                    |                     |
                    | Powered On 96,3%    |
                    | RC6         3,7%    |
                    | RC6p        0,0%    |
                    | RC6pp       0,0%    |
                    |                     |
                    |                     |

I also attach kernel configs of non working 3.13-rc6 and working 3.12.6 
kernels.

Its a ThinkPad T520 with Sandybridge:

merkaba:~> lspci -nn | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation 
Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09)

Debian kernel packages available. But well… optimized for ThinkPad T520, may 
not run nicely otherwere.


Please give suggestions on what to try next. Whats comes to mind is tryining 
without rc6_enable option and then without threadirq option.

Any other idea?

Ciao,
Martin

> But, only when trying to write a file via desktop environment via dolphin
> from KDE in that case. When I am on tty1 it seems to be stable to write to
> the SD card. But with dolphin on writing a large few files vom /usr/bin
> mouse pointer froze again. But according to harddisk led from ThinkPad T520
> there has been some write activity afterwards. The LED also lits up for MMC
> card accesses. Still after reboot there is none of the copied files visible
> on the FAT32 formatted SD card.
> 
> Thus adding Intel gfx and dri devel lists to CC.
> 
> 
> This crashing only under GUI might still be a coindidence. I only tried
> once. But since the crash usually came almost immediately and it didn´t
> crash with reading or writing files on TTY1 and it somehow continued I/O
> according to harddisk led instead of seeming to be completely stopped… well
> I can try again to make sure. Would be good to make it crash on TTY1 since
> then I might see some kernel output.
> 
> 
> Back to 3.12.6 for now. I just tried the same with that kernel and there the
> copying just works nice.
> 
> I can also report a bug at bugzilla.kernel.org if needed.
> 
> 
> May comments about bisecting still applies. I do not feel comfortable with
> doing it on this production machine with production data on it… especially
> given the major block layer changes. There may be points in history were the
> kernel produces data corruption or so.
> 
> Thanks,
> Martin
> 
> > merkaba:~> fdisk -l /dev/mmcblk0
> > 
> > Disk /dev/mmcblk0: 31.4 GB, 31439454208 bytes
> > 255 heads, 63 sectors/track, 3822 cylinders, total 61405184 sectors
> > Units = sectors of 1 * 512 = 512 bytes
> > Sector size (logical/physical): 512 bytes / 512 bytes
> > I/O size (minimum/optimal): 512 bytes / 512 bytes
> > Disk identifier: 0x00000000
> > 
> >         Device Boot      Start         End      Blocks   Id  System
> > 
> > /dev/mmcblk0p1            8192    61405183    30698496    c  W95 FAT32
> > (LBA
> > 
> > 
> > merkaba:/sys/block/mmcblk0#2> grep . * 2>/dev/null
> > alignment_offset:0
> > capability:10
> > dev:179:0
> > discard_alignment:0
> > ext_range:8
> > force_ro:0
> > inflight:       0        0
> > range:8
> > removable:0
> > ro:0
> > size:61405184
> > stat:     176       33     1672      102        0        0        0       
> > 0 0      102      102
> > uevent:MAJOR=179
> > uevent:MINOR=0
> > uevent:DEVNAME=mmcblk0
> > uevent:DEVTYPE=disk
> > 
> > 
> > I do not want to take the time to diagnose this further, especially as its
> > one of those nasty "I just lock up and I don´t tell you what went wrong"
> > kind of bugs. Thats just not a nice way to tell that there has been an
> > error.
> > 
> > 
> > If there is any five or ten minute information gathering task, I am
> > willing
> > to provide more information, but right now there is no chance on Earth
> > that
> > I will be bisecting while having a long list of more interesting things to
> > do than that.
> > 
> > 
> > Thus for now I just use 3.12 kernel again. Maybe I will try with some rc5
> > or so again.
> > 
> > Ciao,

-- 
Martin 'Helios' Steigerwald - http://www.Lichtvoll.de
GPG: 03B0 0D6C 0040 0710 4AFA  B82F 991B EAAC A599 84C7

[-- Attachment #2: config-3.12.6-tp520.xz --]
[-- Type: application/x-xz, Size: 26444 bytes --]

[-- Attachment #3: config-3.13.0-rc6-tp520.xz --]
[-- Type: application/x-xz, Size: 26824 bytes --]

Re: [REGRESSION] 3.13-rc2: locks up hard on trying to transfer a file to mmc based internal SD card slot

[Martin Steigerwald]

Am Samstag, 30. November 2013, 14:53:51 schrieb Martin Steigerwald:
> Just added linux-mmc. And I might git-bisect that at some time, but I do not
> intend to do it during my precious weekend. The chances of me bisecting it
> increase with workable suggestions on how to cut down the amount of
> iterations needed and avoid testing highly experimental between 3.12 and
> 3.13-rc1 kernels on a production laptop. I may be willing to test a patch
> or two. As I see there seem to have been quite some changes in MMC
> subsystem.
> 
> 
> 
> 
> Hi!
> 
> Just does that on a ThinkPad T520 with:
> 
> merkaba:~> lspci -nn | grep MMC
> 0d:00.0 System peripheral [0880]: Ricoh Co Ltd PCIe SDXC/MMC Host Controller
> [1180:e823] (rev 08)
> 
> Mouse pointer freezes, no Ctrl-Alt-F1.

It just does that with

Linux version 3.13.0-rc6-tp520 (martin@merkaba) (gcc version 4.8.2 (Debian 
4.8.2-10) ) #41 SMP PREEMPT Mon Dec 30 13:39:07 CET 2013

as well.

But, only when trying to write a file via desktop environment via dolphin from 
KDE in that case. When I am on tty1 it seems to be stable to write to the SD 
card. But with dolphin on writing a large few files vom /usr/bin mouse pointer 
froze again. But according to harddisk led from ThinkPad T520 there has been 
some write activity afterwards. The LED also lits up for MMC card accesses. 
Still after reboot there is none of the copied files visible on the FAT32 
formatted SD card.

Thus adding Intel gfx and dri devel lists to CC.


This crashing only under GUI might still be a coindidence. I only tried once. 
But since the crash usually came almost immediately and it didn´t crash with 
reading or writing files on TTY1 and it somehow continued I/O according to 
harddisk led instead of seeming to be completely stopped… well I can try again 
to make sure. Would be good to make it crash on TTY1 since then I might see 
some kernel output.


Back to 3.12.6 for now. I just tried the same with that kernel and there the 
copying just works nice.

I can also report a bug at bugzilla.kernel.org if needed.


May comments about bisecting still applies. I do not feel comfortable with 
doing it on this production machine with production data on it… especially 
given the major block layer changes. There may be points in history were the 
kernel produces data corruption or so.

Thanks,
Martin



> 
> 
> merkaba:~> fdisk -l /dev/mmcblk0
> 
> Disk /dev/mmcblk0: 31.4 GB, 31439454208 bytes
> 255 heads, 63 sectors/track, 3822 cylinders, total 61405184 sectors
> Units = sectors of 1 * 512 = 512 bytes
> Sector size (logical/physical): 512 bytes / 512 bytes
> I/O size (minimum/optimal): 512 bytes / 512 bytes
> Disk identifier: 0x00000000
> 
>         Device Boot      Start         End      Blocks   Id  System
> /dev/mmcblk0p1            8192    61405183    30698496    c  W95 FAT32 (LBA
> 
> 
> merkaba:/sys/block/mmcblk0#2> grep . * 2>/dev/null
> alignment_offset:0
> capability:10
> dev:179:0
> discard_alignment:0
> ext_range:8
> force_ro:0
> inflight:       0        0
> range:8
> removable:0
> ro:0
> size:61405184
> stat:     176       33     1672      102        0        0        0        0
> 0      102      102
> uevent:MAJOR=179
> uevent:MINOR=0
> uevent:DEVNAME=mmcblk0
> uevent:DEVTYPE=disk
> 
> 
> I do not want to take the time to diagnose this further, especially as its
> one of those nasty "I just lock up and I don´t tell you what went wrong"
> kind of bugs. Thats just not a nice way to tell that there has been an
> error.
> 
> 
> If there is any five or ten minute information gathering task, I am willing
> to provide more information, but right now there is no chance on Earth that
> I will be bisecting while having a long list of more interesting things to
> do than that.
> 
> 
> Thus for now I just use 3.12 kernel again. Maybe I will try with some rc5 or
> so again.
> 
> Ciao,

-- 
Martin 'Helios' Steigerwald - http://www.Lichtvoll.de
GPG: 03B0 0D6C 0040 0710 4AFA  B82F 991B EAAC A599 84C7

[REGRESSION] 3.13-rc2: locks up hard on trying to transfer a file to mmc based internal SD card slot

[Martin Steigerwald]

Just added linux-mmc. And I might git-bisect that at some time, but I do not 
intend to do it during my precious weekend. The chances of me bisecting it 
increase with workable suggestions on how to cut down the amount of iterations 
needed and avoid testing highly experimental between 3.12 and 3.13-rc1 kernels 
on a production laptop. I may be willing to test a patch or two. As I see 
there seem to have been quite some changes in MMC subsystem.




Hi!

Just does that on a ThinkPad T520 with:

merkaba:~> lspci -nn | grep MMC
0d:00.0 System peripheral [0880]: Ricoh Co Ltd PCIe SDXC/MMC Host Controller 
[1180:e823] (rev 08)

Mouse pointer freezes, no Ctrl-Alt-F1.


merkaba:~> fdisk -l /dev/mmcblk0

Disk /dev/mmcblk0: 31.4 GB, 31439454208 bytes
255 heads, 63 sectors/track, 3822 cylinders, total 61405184 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

        Device Boot      Start         End      Blocks   Id  System
/dev/mmcblk0p1            8192    61405183    30698496    c  W95 FAT32 (LBA


merkaba:/sys/block/mmcblk0#2> grep . * 2>/dev/null
alignment_offset:0
capability:10
dev:179:0
discard_alignment:0
ext_range:8
force_ro:0
inflight:       0        0
range:8
removable:0
ro:0
size:61405184
stat:     176       33     1672      102        0        0        0        0        
0      102      102
uevent:MAJOR=179
uevent:MINOR=0
uevent:DEVNAME=mmcblk0
uevent:DEVTYPE=disk


I do not want to take the time to diagnose this further, especially as its one 
of those nasty "I just lock up and I don´t tell you what went wrong" kind of 
bugs. Thats just not a nice way to tell that there has been an error.


If there is any five or ten minute information gathering task, I am willing to 
provide more information, but right now there is no chance on Earth that I 
will be bisecting while having a long list of more interesting things to do 
than that.


Thus for now I just use 3.12 kernel again. Maybe I will try with some rc5 or 
so again.

Ciao,
-- 
Martin 'Helios' Steigerwald - http://www.Lichtvoll.de
GPG: 03B0 0D6C 0040 0710 4AFA  B82F 991B EAAC A599 84C7