[PATCH 0/3] Add RTC support for PMIC PMK8350

[PATCH 0/3] Add RTC support for PMIC PMK8350

[satya priya]

Convert pm8xxx bindings to yaml and add pmk8350 rtc binding.

satya priya (3):
  rtc: pm8xxx: Add RTC support for PMIC PMK8350
  dt-bindings: mfd: Convert pm8xxx bindings to yaml
  dt-bindings: mfd: Add compatible for pmk8350 rtc

 .../devicetree/bindings/mfd/qcom-pm8xxx.txt        |  99 -------------------
 .../devicetree/bindings/mfd/qcom-pm8xxx.yaml       | 109 +++++++++++++++++++++
 drivers/rtc/rtc-pm8xxx.c                           |  11 +++
 3 files changed, 120 insertions(+), 99 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH 1/3] rtc: pm8xxx: Add RTC support for PMIC PMK8350

[satya priya]

Add the comaptible string for PMIC PMK8350.

Signed-off-by: satya priya <skakit@codeaurora.org>
---
 drivers/rtc/rtc-pm8xxx.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
index eb20659..29a1c65 100644
--- a/drivers/rtc/rtc-pm8xxx.c
+++ b/drivers/rtc/rtc-pm8xxx.c
@@ -445,6 +445,16 @@ static const struct pm8xxx_rtc_regs pm8941_regs = {
 	.alarm_en	= BIT(7),
 };
 
+static const struct pm8xxx_rtc_regs pmk8350_regs = {
+	.ctrl		= 0x6146,
+	.write		= 0x6140,
+	.read		= 0x6148,
+	.alarm_rw	= 0x6240,
+	.alarm_ctrl	= 0x6246,
+	.alarm_ctrl2	= 0x6248,
+	.alarm_en	= BIT(7),
+};
+
 /*
  * Hardcoded RTC bases until IORESOURCE_REG mapping is figured out
  */
@@ -453,6 +463,7 @@ static const struct of_device_id pm8xxx_id_table[] = {
 	{ .compatible = "qcom,pm8018-rtc", .data = &pm8921_regs },
 	{ .compatible = "qcom,pm8058-rtc", .data = &pm8058_regs },
 	{ .compatible = "qcom,pm8941-rtc", .data = &pm8941_regs },
+	{ .compatible = "qcom,pmk8350-rtc", .data = &pmk8350_regs },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, pm8xxx_id_table);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH 1/3] rtc: pm8xxx: Add RTC support for PMIC PMK8350

[Bjorn Andersson]

On Thu 11 Mar 01:29 CST 2021, satya priya wrote:

> Add the comaptible string for PMIC PMK8350.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> Signed-off-by: satya priya <skakit@codeaurora.org>
> ---
>  drivers/rtc/rtc-pm8xxx.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
> index eb20659..29a1c65 100644
> --- a/drivers/rtc/rtc-pm8xxx.c
> +++ b/drivers/rtc/rtc-pm8xxx.c
> @@ -445,6 +445,16 @@ static const struct pm8xxx_rtc_regs pm8941_regs = {
>  	.alarm_en	= BIT(7),
>  };
>  
> +static const struct pm8xxx_rtc_regs pmk8350_regs = {
> +	.ctrl		= 0x6146,
> +	.write		= 0x6140,
> +	.read		= 0x6148,
> +	.alarm_rw	= 0x6240,
> +	.alarm_ctrl	= 0x6246,
> +	.alarm_ctrl2	= 0x6248,
> +	.alarm_en	= BIT(7),
> +};
> +
>  /*
>   * Hardcoded RTC bases until IORESOURCE_REG mapping is figured out
>   */
> @@ -453,6 +463,7 @@ static const struct of_device_id pm8xxx_id_table[] = {
>  	{ .compatible = "qcom,pm8018-rtc", .data = &pm8921_regs },
>  	{ .compatible = "qcom,pm8058-rtc", .data = &pm8058_regs },
>  	{ .compatible = "qcom,pm8941-rtc", .data = &pm8941_regs },
> +	{ .compatible = "qcom,pmk8350-rtc", .data = &pmk8350_regs },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, pm8xxx_id_table);
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
> of Code Aurora Forum, hosted by The Linux Foundation
> 

[PATCH 2/3] dt-bindings: mfd: Convert pm8xxx bindings to yaml

[satya priya]

Convert pm8xxx rtc bindings from .txt to .yaml format.

Signed-off-by: satya priya <skakit@codeaurora.org>
---
 .../devicetree/bindings/mfd/qcom-pm8xxx.txt        |  99 -------------------
 .../devicetree/bindings/mfd/qcom-pm8xxx.yaml       | 108 +++++++++++++++++++++
 2 files changed, 108 insertions(+), 99 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml

diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
deleted file mode 100644
index 9e5eba4..0000000
--- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-Qualcomm PM8xxx PMIC multi-function devices
-
-The PM8xxx family of Power Management ICs are used to provide regulated
-voltages and other various functionality to Qualcomm SoCs.
-
-= PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,pm8058"
-		    "qcom,pm8821"
-		    "qcom,pm8921"
-
-- #address-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 1
-
-- #size-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 0
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: specifies the interrupt that indicates a subdevice
-		    has generated an interrupt (summary interrupt). The
-		    format of the specifier is defined by the binding document
-		    describing the node's interrupt parent.
-
-- #interrupt-cells:
-	Usage: required
-	Value type : <u32>
-	Definition: must be 2. Specifies the number of cells needed to encode
-		    an interrupt source. The 1st cell contains the interrupt
-		    number. The 2nd cell is the trigger type and level flags
-		    encoded as follows:
-
-			1 = low-to-high edge triggered
-			2 = high-to-low edge triggered
-			4 = active high level-sensitive
-			8 = active low level-sensitive
-
-- interrupt-controller:
-	Usage: required
-	Value type: <empty>
-	Definition: identifies this node as an interrupt controller
-
-= SUBCOMPONENTS
-
-The PMIC contains multiple independent functions, each described in a subnode.
-The below bindings specify the set of valid subnodes.
-
-== Real-Time Clock
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,pm8058-rtc"
-		    "qcom,pm8921-rtc"
-		    "qcom,pm8941-rtc"
-		    "qcom,pm8018-rtc"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: single entry specifying the base address of the RTC registers
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: single entry specifying the RTC's alarm interrupt
-
-- allow-set-time:
-	Usage: optional
-	Value type: <empty>
-	Definition: indicates that the setting of RTC time is allowed by
-		    the host CPU
-
-= EXAMPLE
-
-	pmicintc: pmic@0 {
-		compatible = "qcom,pm8921";
-		interrupts = <104 8>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rtc@11d {
-			compatible = "qcom,pm8921-rtc";
-			reg = <0x11d>;
-			interrupts = <0x27 0>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
new file mode 100644
index 0000000..b4892f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/qcom-pm8xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8xxx PMIC multi-function devices
+
+maintainers:
+  - Lee Jones <lee.jones@linaro.org>
+
+description: |
+  The PM8xxx family of Power Management ICs are used to provide regulated
+  voltages and other various functionality to Qualcomm SoCs.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8058
+      - qcom,pm8821
+      - qcom,pm8921
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+     const: 1
+
+  '#size-cells':
+     const: 0
+
+  interrupts:
+    description: |
+      Specifies the interrupt that indicates a subdevice has generated an
+      interrupt (summary interrupt).
+
+  '#interrupt-cells':
+    description: |
+      Specifies the number of cells needed to encode an interrupt source.
+      The 1st cell contains the interrupt number. The 2nd cell is the
+      trigger type.
+    const: 2
+
+  interrupt-controller: true
+
+patternProperties:
+  "rtc@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - qcom,pm8058-rtc
+          - qcom,pm8921-rtc
+          - qcom,pm8941-rtc
+          - qcom,pm8018-rtc
+
+      reg:
+        description: Specifies the base address of the RTC registers
+
+      interrupts:
+        description: Specifies the RTC's alarm interrupts
+
+      allow-set-time:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Indicates that the setting of RTC time is allowed by the host CPU.
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - interrupts
+  - '#interrupt-cells'
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/spmi/spmi.h>
+    spmi_bus: spmi@c440000 {
+      reg = <0x0c440000 0x1100>;
+      #address-cells = <2>;
+      #size-cells = <0>;
+      pmicintc: pmic@0 {
+        reg = <0x0 SPMI_USID>;
+        compatible = "qcom,pm8921";
+        interrupts = <104 8>;
+        #interrupt-cells = <2>;
+        interrupt-controller;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pm8921_rtc: rtc@11d {
+          compatible = "qcom,pm8921-rtc";
+          reg = <0x11d>;
+          interrupts = <0x27 0>;
+        };
+      };
+    };
+...
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH 2/3] dt-bindings: mfd: Convert pm8xxx bindings to yaml

[Rob Herring]

On Thu, 11 Mar 2021 12:59:57 +0530, satya priya wrote:
> Convert pm8xxx rtc bindings from .txt to .yaml format.
> 
> Signed-off-by: satya priya <skakit@codeaurora.org>
> ---
>  .../devicetree/bindings/mfd/qcom-pm8xxx.txt        |  99 -------------------
>  .../devicetree/bindings/mfd/qcom-pm8xxx.yaml       | 108 +++++++++++++++++++++
>  2 files changed, 108 insertions(+), 99 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
>  create mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml:27:6: [warning] wrong indentation: expected 4 but found 5 (indentation)
./Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml:30:6: [warning] wrong indentation: expected 4 but found 5 (indentation)

dtschema/dtc warnings/errors:

See https://patchwork.ozlabs.org/patch/1450975

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

Re: [PATCH 2/3] dt-bindings: mfd: Convert pm8xxx bindings to yaml

[Bjorn Andersson]

On Thu 11 Mar 01:29 CST 2021, satya priya wrote:

> Convert pm8xxx rtc bindings from .txt to .yaml format.
> 

Wonderful initiative, thank you!

> Signed-off-by: satya priya <skakit@codeaurora.org>
> ---
>  .../devicetree/bindings/mfd/qcom-pm8xxx.txt        |  99 -------------------
>  .../devicetree/bindings/mfd/qcom-pm8xxx.yaml       | 108 +++++++++++++++++++++
>  2 files changed, 108 insertions(+), 99 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
>  create mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
> deleted file mode 100644
> index 9e5eba4..0000000
> --- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
> +++ /dev/null
> @@ -1,99 +0,0 @@
> -Qualcomm PM8xxx PMIC multi-function devices
> -
> -The PM8xxx family of Power Management ICs are used to provide regulated
> -voltages and other various functionality to Qualcomm SoCs.
> -
> -= PROPERTIES
> -
> -- compatible:
> -	Usage: required
> -	Value type: <string>
> -	Definition: must be one of:
> -		    "qcom,pm8058"
> -		    "qcom,pm8821"
> -		    "qcom,pm8921"
> -
> -- #address-cells:
> -	Usage: required
> -	Value type: <u32>
> -	Definition: must be 1
> -
> -- #size-cells:
> -	Usage: required
> -	Value type: <u32>
> -	Definition: must be 0
> -
> -- interrupts:
> -	Usage: required
> -	Value type: <prop-encoded-array>
> -	Definition: specifies the interrupt that indicates a subdevice
> -		    has generated an interrupt (summary interrupt). The
> -		    format of the specifier is defined by the binding document
> -		    describing the node's interrupt parent.
> -
> -- #interrupt-cells:
> -	Usage: required
> -	Value type : <u32>
> -	Definition: must be 2. Specifies the number of cells needed to encode
> -		    an interrupt source. The 1st cell contains the interrupt
> -		    number. The 2nd cell is the trigger type and level flags
> -		    encoded as follows:
> -
> -			1 = low-to-high edge triggered
> -			2 = high-to-low edge triggered
> -			4 = active high level-sensitive
> -			8 = active low level-sensitive
> -
> -- interrupt-controller:
> -	Usage: required
> -	Value type: <empty>
> -	Definition: identifies this node as an interrupt controller
> -
> -= SUBCOMPONENTS
> -
> -The PMIC contains multiple independent functions, each described in a subnode.
> -The below bindings specify the set of valid subnodes.
> -
> -== Real-Time Clock
> -
> -- compatible:
> -	Usage: required
> -	Value type: <string>
> -	Definition: must be one of:
> -		    "qcom,pm8058-rtc"
> -		    "qcom,pm8921-rtc"
> -		    "qcom,pm8941-rtc"
> -		    "qcom,pm8018-rtc"
> -
> -- reg:
> -	Usage: required
> -	Value type: <prop-encoded-array>
> -	Definition: single entry specifying the base address of the RTC registers
> -
> -- interrupts:
> -	Usage: required
> -	Value type: <prop-encoded-array>
> -	Definition: single entry specifying the RTC's alarm interrupt
> -
> -- allow-set-time:
> -	Usage: optional
> -	Value type: <empty>
> -	Definition: indicates that the setting of RTC time is allowed by
> -		    the host CPU
> -
> -= EXAMPLE
> -
> -	pmicintc: pmic@0 {
> -		compatible = "qcom,pm8921";
> -		interrupts = <104 8>;
> -		#interrupt-cells = <2>;
> -		interrupt-controller;
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		rtc@11d {
> -			compatible = "qcom,pm8921-rtc";
> -			reg = <0x11d>;
> -			interrupts = <0x27 0>;
> -		};
> -	};
> diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
> new file mode 100644
> index 0000000..b4892f1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
> @@ -0,0 +1,108 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/qcom-pm8xxx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm PM8xxx PMIC multi-function devices
> +
> +maintainers:
> +  - Lee Jones <lee.jones@linaro.org>

While Lee is maintainer of the mfd core, it would be better if this was
someone looking out for the Qualcomm PMIC binding specifically.

> +
> +description: |
> +  The PM8xxx family of Power Management ICs are used to provide regulated
> +  voltages and other various functionality to Qualcomm SoCs.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,pm8058
> +      - qcom,pm8821
> +      - qcom,pm8921
> +
> +  reg:
> +    maxItems: 1
> +
> +  '#address-cells':
> +     const: 1
> +
> +  '#size-cells':
> +     const: 0
> +
> +  interrupts:
> +    description: |
> +      Specifies the interrupt that indicates a subdevice has generated an
> +      interrupt (summary interrupt).
> +
> +  '#interrupt-cells':
> +    description: |
> +      Specifies the number of cells needed to encode an interrupt source.
> +      The 1st cell contains the interrupt number. The 2nd cell is the
> +      trigger type.
> +    const: 2
> +
> +  interrupt-controller: true
> +
> +patternProperties:
> +  "rtc@[0-9a-f]+$":

Can we somehow link this to individual binding docs instead of listing
all the possible functions here?

Regards,
Bjorn

> +    type: object
> +    properties:
> +      compatible:
> +        enum:
> +          - qcom,pm8058-rtc
> +          - qcom,pm8921-rtc
> +          - qcom,pm8941-rtc
> +          - qcom,pm8018-rtc
> +
> +      reg:
> +        description: Specifies the base address of the RTC registers
> +
> +      interrupts:
> +        description: Specifies the RTC's alarm interrupts
> +
> +      allow-set-time:
> +        $ref: /schemas/types.yaml#/definitions/flag
> +        description:
> +          Indicates that the setting of RTC time is allowed by the host CPU.
> +
> +    required:
> +      - compatible
> +      - reg
> +      - interrupts
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - '#address-cells'
> +  - '#size-cells'
> +  - interrupts
> +  - '#interrupt-cells'
> +  - interrupt-controller
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/spmi/spmi.h>
> +    spmi_bus: spmi@c440000 {
> +      reg = <0x0c440000 0x1100>;
> +      #address-cells = <2>;
> +      #size-cells = <0>;
> +      pmicintc: pmic@0 {
> +        reg = <0x0 SPMI_USID>;
> +        compatible = "qcom,pm8921";
> +        interrupts = <104 8>;
> +        #interrupt-cells = <2>;
> +        interrupt-controller;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        pm8921_rtc: rtc@11d {
> +          compatible = "qcom,pm8921-rtc";
> +          reg = <0x11d>;
> +          interrupts = <0x27 0>;
> +        };
> +      };
> +    };
> +...
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
> of Code Aurora Forum, hosted by The Linux Foundation
> 

Re: [PATCH 2/3] dt-bindings: mfd: Convert pm8xxx bindings to yaml

[skakit]

Hi Bjorn,

On 2021-03-11 22:33, Bjorn Andersson wrote:
> On Thu 11 Mar 01:29 CST 2021, satya priya wrote:
> 
>> Convert pm8xxx rtc bindings from .txt to .yaml format.
>> 
> 
> Wonderful initiative, thank you!
> 
>> Signed-off-by: satya priya <skakit@codeaurora.org>
>> ---
>>  .../devicetree/bindings/mfd/qcom-pm8xxx.txt        |  99 
>> -------------------
>>  .../devicetree/bindings/mfd/qcom-pm8xxx.yaml       | 108 
>> +++++++++++++++++++++
>>  2 files changed, 108 insertions(+), 99 deletions(-)
>>  delete mode 100644 
>> Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
>>  create mode 100644 
>> Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
>> 
>> diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt 
>> b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
>> deleted file mode 100644
>> index 9e5eba4..0000000
>> --- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
>> +++ /dev/null
>> @@ -1,99 +0,0 @@
>> -Qualcomm PM8xxx PMIC multi-function devices
>> -
>> -The PM8xxx family of Power Management ICs are used to provide 
>> regulated
>> -voltages and other various functionality to Qualcomm SoCs.
>> -
>> -= PROPERTIES
>> -
>> -- compatible:
>> -	Usage: required
>> -	Value type: <string>
>> -	Definition: must be one of:
>> -		    "qcom,pm8058"
>> -		    "qcom,pm8821"
>> -		    "qcom,pm8921"
>> -
>> -- #address-cells:
>> -	Usage: required
>> -	Value type: <u32>
>> -	Definition: must be 1
>> -
>> -- #size-cells:
>> -	Usage: required
>> -	Value type: <u32>
>> -	Definition: must be 0
>> -
>> -- interrupts:
>> -	Usage: required
>> -	Value type: <prop-encoded-array>
>> -	Definition: specifies the interrupt that indicates a subdevice
>> -		    has generated an interrupt (summary interrupt). The
>> -		    format of the specifier is defined by the binding document
>> -		    describing the node's interrupt parent.
>> -
>> -- #interrupt-cells:
>> -	Usage: required
>> -	Value type : <u32>
>> -	Definition: must be 2. Specifies the number of cells needed to 
>> encode
>> -		    an interrupt source. The 1st cell contains the interrupt
>> -		    number. The 2nd cell is the trigger type and level flags
>> -		    encoded as follows:
>> -
>> -			1 = low-to-high edge triggered
>> -			2 = high-to-low edge triggered
>> -			4 = active high level-sensitive
>> -			8 = active low level-sensitive
>> -
>> -- interrupt-controller:
>> -	Usage: required
>> -	Value type: <empty>
>> -	Definition: identifies this node as an interrupt controller
>> -
>> -= SUBCOMPONENTS
>> -
>> -The PMIC contains multiple independent functions, each described in a 
>> subnode.
>> -The below bindings specify the set of valid subnodes.
>> -
>> -== Real-Time Clock
>> -
>> -- compatible:
>> -	Usage: required
>> -	Value type: <string>
>> -	Definition: must be one of:
>> -		    "qcom,pm8058-rtc"
>> -		    "qcom,pm8921-rtc"
>> -		    "qcom,pm8941-rtc"
>> -		    "qcom,pm8018-rtc"
>> -
>> -- reg:
>> -	Usage: required
>> -	Value type: <prop-encoded-array>
>> -	Definition: single entry specifying the base address of the RTC 
>> registers
>> -
>> -- interrupts:
>> -	Usage: required
>> -	Value type: <prop-encoded-array>
>> -	Definition: single entry specifying the RTC's alarm interrupt
>> -
>> -- allow-set-time:
>> -	Usage: optional
>> -	Value type: <empty>
>> -	Definition: indicates that the setting of RTC time is allowed by
>> -		    the host CPU
>> -
>> -= EXAMPLE
>> -
>> -	pmicintc: pmic@0 {
>> -		compatible = "qcom,pm8921";
>> -		interrupts = <104 8>;
>> -		#interrupt-cells = <2>;
>> -		interrupt-controller;
>> -		#address-cells = <1>;
>> -		#size-cells = <0>;
>> -
>> -		rtc@11d {
>> -			compatible = "qcom,pm8921-rtc";
>> -			reg = <0x11d>;
>> -			interrupts = <0x27 0>;
>> -		};
>> -	};
>> diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml 
>> b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
>> new file mode 100644
>> index 0000000..b4892f1
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
>> @@ -0,0 +1,108 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/mfd/qcom-pm8xxx.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm PM8xxx PMIC multi-function devices
>> +
>> +maintainers:
>> +  - Lee Jones <lee.jones@linaro.org>
> 
> While Lee is maintainer of the mfd core, it would be better if this was
> someone looking out for the Qualcomm PMIC binding specifically.
> 
>> +
>> +description: |
>> +  The PM8xxx family of Power Management ICs are used to provide 
>> regulated
>> +  voltages and other various functionality to Qualcomm SoCs.
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - qcom,pm8058
>> +      - qcom,pm8821
>> +      - qcom,pm8921
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  '#address-cells':
>> +     const: 1
>> +
>> +  '#size-cells':
>> +     const: 0
>> +
>> +  interrupts:
>> +    description: |
>> +      Specifies the interrupt that indicates a subdevice has 
>> generated an
>> +      interrupt (summary interrupt).
>> +
>> +  '#interrupt-cells':
>> +    description: |
>> +      Specifies the number of cells needed to encode an interrupt 
>> source.
>> +      The 1st cell contains the interrupt number. The 2nd cell is the
>> +      trigger type.
>> +    const: 2
>> +
>> +  interrupt-controller: true
>> +
>> +patternProperties:
>> +  "rtc@[0-9a-f]+$":
> 
> Can we somehow link this to individual binding docs instead of listing
> all the possible functions here?
> 

you mean we should split this into two:
qcom-pm8xxx.yaml and qcom-pm8xxx-rtc.yaml
Please correct me if wrong.

> Regards,
> Bjorn
> 
>> +    type: object
>> +    properties:
>> +      compatible:
>> +        enum:
>> +          - qcom,pm8058-rtc
>> +          - qcom,pm8921-rtc
>> +          - qcom,pm8941-rtc
>> +          - qcom,pm8018-rtc
>> +
>> +      reg:
>> +        description: Specifies the base address of the RTC registers
>> +
>> +      interrupts:
>> +        description: Specifies the RTC's alarm interrupts
>> +
>> +      allow-set-time:
>> +        $ref: /schemas/types.yaml#/definitions/flag
>> +        description:
>> +          Indicates that the setting of RTC time is allowed by the 
>> host CPU.
>> +
>> +    required:
>> +      - compatible
>> +      - reg
>> +      - interrupts
>> +
>> +    additionalProperties: false
>> +
>> +required:
>> +  - compatible
>> +  - '#address-cells'
>> +  - '#size-cells'
>> +  - interrupts
>> +  - '#interrupt-cells'
>> +  - interrupt-controller
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/spmi/spmi.h>
>> +    spmi_bus: spmi@c440000 {
>> +      reg = <0x0c440000 0x1100>;
>> +      #address-cells = <2>;
>> +      #size-cells = <0>;
>> +      pmicintc: pmic@0 {
>> +        reg = <0x0 SPMI_USID>;
>> +        compatible = "qcom,pm8921";
>> +        interrupts = <104 8>;
>> +        #interrupt-cells = <2>;
>> +        interrupt-controller;
>> +        #address-cells = <1>;
>> +        #size-cells = <0>;
>> +
>> +        pm8921_rtc: rtc@11d {
>> +          compatible = "qcom,pm8921-rtc";
>> +          reg = <0x11d>;
>> +          interrupts = <0x27 0>;
>> +        };
>> +      };
>> +    };
>> +...
>> --
>> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a 
>> member
>> of Code Aurora Forum, hosted by The Linux Foundation
>> 

Re: [PATCH 2/3] dt-bindings: mfd: Convert pm8xxx bindings to yaml

[Bjorn Andersson]

On Wed 07 Apr 10:37 CDT 2021, skakit@codeaurora.org wrote:

> Hi Bjorn,
> 
> On 2021-03-11 22:33, Bjorn Andersson wrote:
> > On Thu 11 Mar 01:29 CST 2021, satya priya wrote:
[..]
> > > +patternProperties:
> > > +  "rtc@[0-9a-f]+$":
> > 
> > Can we somehow link this to individual binding docs instead of listing
> > all the possible functions here?
> > 
> 
> you mean we should split this into two:
> qcom-pm8xxx.yaml and qcom-pm8xxx-rtc.yaml
> Please correct me if wrong.
> 

Right, I'm worried that it will be quite hard to maintain this document
once we start adding all the various pmic blocks to it. So if we somehow
can maintain a series of qcom-pm8xxx-<func>.yaml and just ref them into
the main PMIC definition.

@Rob, can you give us some guidance on how to structure this binding,
with the various PMICs described will have some defined subset of a
larger set of hardware blocks that's often shared between versions?

Regards,
Bjorn

Re: [PATCH 2/3] dt-bindings: mfd: Convert pm8xxx bindings to yaml

[Rob Herring]

On Wed, Apr 7, 2021 at 9:37 PM Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> On Wed 07 Apr 10:37 CDT 2021, skakit@codeaurora.org wrote:
>
> > Hi Bjorn,
> >
> > On 2021-03-11 22:33, Bjorn Andersson wrote:
> > > On Thu 11 Mar 01:29 CST 2021, satya priya wrote:
> [..]
> > > > +patternProperties:
> > > > +  "rtc@[0-9a-f]+$":
> > >
> > > Can we somehow link this to individual binding docs instead of listing
> > > all the possible functions here?
> > >
> >
> > you mean we should split this into two:
> > qcom-pm8xxx.yaml and qcom-pm8xxx-rtc.yaml
> > Please correct me if wrong.
> >
>
> Right, I'm worried that it will be quite hard to maintain this document
> once we start adding all the various pmic blocks to it. So if we somehow
> can maintain a series of qcom-pm8xxx-<func>.yaml and just ref them into
> the main PMIC definition.
>
> @Rob, can you give us some guidance on how to structure this binding,
> with the various PMICs described will have some defined subset of a
> larger set of hardware blocks that's often shared between versions?

How you suggest is good. The only other thing is just 1 complete
example rather than a bunch of <func> fragments.

Rob

[PATCH 3/3] dt-bindings: mfd: Add compatible for pmk8350 rtc

[satya priya]

Add compatible string for pmk8350 rtc support.

Signed-off-by: satya priya <skakit@codeaurora.org>
---
 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
index b4892f1..676decc 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
@@ -53,6 +53,7 @@ patternProperties:
           - qcom,pm8921-rtc
           - qcom,pm8941-rtc
           - qcom,pm8018-rtc
+          - qcom,pmk8350-rtc
 
       reg:
         description: Specifies the base address of the RTC registers
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH 3/3] dt-bindings: mfd: Add compatible for pmk8350 rtc

[Bjorn Andersson]

On Thu 11 Mar 01:29 CST 2021, satya priya wrote:

> Add compatible string for pmk8350 rtc support.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>


If you add this before doing the yaml binding migration it might be
possible for the maintainer to merge the functional additions while
we're still trying to figure out the yaml...

Regards,
Bjorn

> Signed-off-by: satya priya <skakit@codeaurora.org>
> ---
>  Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
> index b4892f1..676decc 100644
> --- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
> +++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
> @@ -53,6 +53,7 @@ patternProperties:
>            - qcom,pm8921-rtc
>            - qcom,pm8941-rtc
>            - qcom,pm8018-rtc
> +          - qcom,pmk8350-rtc
>  
>        reg:
>          description: Specifies the base address of the RTC registers
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
> of Code Aurora Forum, hosted by The Linux Foundation
>