From: Loys Ollivier <lollivier@baylibre.com>
To: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, Kevin Hilman <khilman@baylibre.com>,
Johan Hovold <johan@kernel.org>,
"linux-kernel\@vger.kernel.org" <linux-kernel@vger.kernel.org>,
linux-amlogic@lists.infradead.org
Subject: Re: [PATCH 0/4] Add driver for globaltop GNSS receivers
Date: Tue, 15 Jan 2019 11:00:37 +0100 [thread overview]
Message-ID: <86fttup7ei.fsf@baylibre.com> (raw)
In-Reply-To: <CAL_JsqLvSWF60eqLsXUcP5GL0ijgfE6XwvectiM1D1Y9LPpOkA@mail.gmail.com> (Rob Herring's message of "Fri, 4 Jan 2019 11:51:51 -0600")
On Fri 04 Jan 2019 at 11:51, Rob Herring <robh+dt@kernel.org> wrote:
> On Fri, Dec 28, 2018 at 4:51 AM Loys Ollivier <lollivier@baylibre.com> wrote:
>>
>> Hello !
>>
>> This patch series adds a new GNSS driver for the globaltop GNSS receivers.
>> These receivers transmits NMEA output sequence as soon as they have booted.
>> Power management can be done via the main supply and optional backup supply
>> as defined in the device tree.
>>
>> The driver has been tested using a GlobalTop pa6h chipset on a Libretech-cc
>> board using the expansion header. Changes made in the board device tree can
>> be found below for reference and testing.
>>
>> Loys
>>
>> Loys Ollivier (4):
>> dt-bindings: Add vendor prefix for "GlobalTop Technology, Inc."
>> dt-bindings: gnss: add gtop binding
>> gnss: add gtop receiver type support
>> gnss: add driver for globaltop receivers
>>
>> Documentation/devicetree/bindings/gnss/gtop.txt | 33 +++++
>> .../devicetree/bindings/vendor-prefixes.txt | 1 +
>> drivers/gnss/Kconfig | 13 ++
>> drivers/gnss/Makefile | 3 +
>> drivers/gnss/core.c | 1 +
>> drivers/gnss/gtop.c | 152 +++++++++++++++++++++
>> include/linux/gnss.h | 1 +
>> 7 files changed, 204 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/gnss/gtop.txt
>> create mode 100644 drivers/gnss/gtop.c
>>
>> ---
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
>> index 90a56af967a7..3b3d4dcc47aa 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
>> @@ -17,6 +17,7 @@
>>
>> aliases {
>> serial0 = &uart_AO;
>> + serial1 = &uart_A;
>
> You should not need this as the UART is not used as a tty. It could be
> that the serial driver requires aliases, but that should be fixed.
> There should be some examples of fixing this in other serial drivers.
>
Thanks Rob,
Followed up on that [0].
[0]: https://lore.kernel.org/linux-amlogic/1547484866-3600-1-git-send-email-lollivier@baylibre.com/
>> ethernet0 = ðmac;
>> };
>
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic
prev parent reply other threads:[~2019-01-15 10:00 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-28 10:50 [PATCH 0/4] Add driver for globaltop GNSS receivers Loys Ollivier
2018-12-28 10:50 ` [PATCH 1/4] dt-bindings: Add vendor prefix for "GlobalTop Technology, Inc." Loys Ollivier
2019-01-11 14:40 ` Rob Herring
2018-12-28 10:50 ` [PATCH 2/4] dt-bindings: gnss: add gtop binding Loys Ollivier
2019-01-11 14:43 ` Rob Herring
2018-12-28 10:50 ` [PATCH 3/4] gnss: add gtop receiver type support Loys Ollivier
2018-12-28 10:50 ` [PATCH 4/4] gnss: add driver for globaltop receivers Loys Ollivier
2019-01-03 16:04 ` [PATCH 0/4] Add driver for globaltop GNSS receivers Loys Ollivier
2019-01-04 9:19 ` Johan Hovold
2019-01-07 16:21 ` Loys Ollivier
2019-01-07 16:37 ` Johan Hovold
2019-01-04 17:51 ` Rob Herring
2019-01-15 10:00 ` Loys Ollivier [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=86fttup7ei.fsf@baylibre.com \
--to=lollivier@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=johan@kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).