linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: Wei Liu <wei.liu@kernel.org>,
	Linux on Hyper-V List <linux-hyperv@vger.kernel.org>
Cc: virtualization@lists.linux-foundation.org,
	Linux Kernel List <linux-kernel@vger.kernel.org>,
	Michael Kelley <mikelley@microsoft.com>,
	Vineeth Pillai <viremana@linux.microsoft.com>,
	Sunil Muthuswamy <sunilmut@microsoft.com>,
	Nuno Das Neves <nunodasneves@linux.microsoft.com>,
	Wei Liu <wei.liu@kernel.org>,
	Lillian Grassin-Drake <ligrassi@microsoft.com>,
	"K. Y. Srinivasan" <kys@microsoft.com>,
	Haiyang Zhang <haiyangz@microsoft.com>,
	Stephen Hemminger <sthemmin@microsoft.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
	"maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)"
	<x86@kernel.org>, "H. Peter Anvin" <hpa@zytor.com>,
	Arnd Bergmann <arnd@arndb.de>,
	"open list:GENERIC INCLUDE/ASM HEADER FILES" 
	<linux-arch@vger.kernel.org>
Subject: Re: [PATCH v2 09/17] x86/hyperv: provide a bunch of helper functions
Date: Thu, 12 Nov 2020 16:57:46 +0100	[thread overview]
Message-ID: <871rgyy3d1.fsf@vitty.brq.redhat.com> (raw)
In-Reply-To: <20201105165814.29233-10-wei.liu@kernel.org>

Wei Liu <wei.liu@kernel.org> writes:

> They are used to deposit pages into Microsoft Hypervisor and bring up
> logical and virtual processors.
>
> Signed-off-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
> Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
> Co-Developed-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
> Co-Developed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
> Co-Developed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
> Signed-off-by: Wei Liu <wei.liu@kernel.org>
> ---
> v2:
> 1. Adapt to hypervisor side changes
> 2. Address Vitaly's comments
> ---
>  arch/x86/hyperv/Makefile          |   2 +-
>  arch/x86/hyperv/hv_proc.c         | 217 ++++++++++++++++++++++++++++++
>  arch/x86/include/asm/mshyperv.h   |   4 +
>  include/asm-generic/hyperv-tlfs.h |  67 +++++++++
>  4 files changed, 289 insertions(+), 1 deletion(-)
>  create mode 100644 arch/x86/hyperv/hv_proc.c
>
> diff --git a/arch/x86/hyperv/Makefile b/arch/x86/hyperv/Makefile
> index 89b1f74d3225..565358020921 100644
> --- a/arch/x86/hyperv/Makefile
> +++ b/arch/x86/hyperv/Makefile
> @@ -1,6 +1,6 @@
>  # SPDX-License-Identifier: GPL-2.0-only
>  obj-y			:= hv_init.o mmu.o nested.o
> -obj-$(CONFIG_X86_64)	+= hv_apic.o
> +obj-$(CONFIG_X86_64)	+= hv_apic.o hv_proc.o
>  
>  ifdef CONFIG_X86_64
>  obj-$(CONFIG_PARAVIRT_SPINLOCKS)	+= hv_spinlock.o
> diff --git a/arch/x86/hyperv/hv_proc.c b/arch/x86/hyperv/hv_proc.c
> new file mode 100644
> index 000000000000..0fd972c9129a
> --- /dev/null
> +++ b/arch/x86/hyperv/hv_proc.c
> @@ -0,0 +1,217 @@
> +// SPDX-License-Identifier: GPL-2.0
> +#include <linux/types.h>
> +#include <linux/version.h>
> +#include <linux/vmalloc.h>
> +#include <linux/mm.h>
> +#include <linux/clockchips.h>
> +#include <linux/acpi.h>
> +#include <linux/hyperv.h>
> +#include <linux/slab.h>
> +#include <linux/cpuhotplug.h>
> +#include <linux/minmax.h>
> +#include <asm/hypervisor.h>
> +#include <asm/mshyperv.h>
> +#include <asm/apic.h>
> +
> +#include <asm/trace/hyperv.h>
> +
> +#define HV_DEPOSIT_MAX_ORDER (8)
> +#define HV_DEPOSIT_MAX (1 << HV_DEPOSIT_MAX_ORDER)
> +
> +/*
> + * Deposits exact number of pages
> + * Must be called with interrupts enabled
> + * Max 256 pages
> + */
> +int hv_call_deposit_pages(int node, u64 partition_id, u32 num_pages)
> +{
> +	struct page **pages;
> +	int *counts;
> +	int num_allocations;
> +	int i, j, page_count;
> +	int order;
> +	int desired_order;
> +	u16 status;
> +	int ret;
> +	u64 base_pfn;
> +	struct hv_deposit_memory *input_page;
> +	unsigned long flags;
> +
> +	if (num_pages > HV_DEPOSIT_MAX)
> +		return -E2BIG;
> +	if (!num_pages)
> +		return 0;
> +
> +	/* One buffer for page pointers and counts */
> +	pages = page_address(alloc_page(GFP_KERNEL));
> +	if (!pages)
> +		return -ENOMEM;
> +
> +	counts = kcalloc(HV_DEPOSIT_MAX, sizeof(int), GFP_KERNEL);
> +	if (!counts) {
> +		free_page((unsigned long)pages);
> +		return -ENOMEM;
> +	}
> +
> +	/* Allocate all the pages before disabling interrupts */
> +	num_allocations = 0;
> +	i = 0;
> +	order = HV_DEPOSIT_MAX_ORDER;
> +
> +	while (num_pages) {
> +		/* Find highest order we can actually allocate */
> +		desired_order = 31 - __builtin_clz(num_pages);
> +		order = min(desired_order, order);
> +		do {
> +			pages[i] = alloc_pages_node(node, GFP_KERNEL, order);
> +			if (!pages[i]) {
> +				if (!order) {
> +					ret = -ENOMEM;
> +					goto err_free_allocations;
> +				}
> +				--order;
> +			}
> +		} while (!pages[i]);
> +
> +		split_page(pages[i], order);
> +		counts[i] = 1 << order;
> +		num_pages -= counts[i];
> +		i++;
> +		num_allocations++;
> +	}
> +
> +	local_irq_save(flags);
> +
> +	input_page = *this_cpu_ptr(hyperv_pcpu_input_arg);
> +
> +	input_page->partition_id = partition_id;
> +
> +	/* Populate gpa_page_list - these will fit on the input page */
> +	for (i = 0, page_count = 0; i < num_allocations; ++i) {
> +		base_pfn = page_to_pfn(pages[i]);
> +		for (j = 0; j < counts[i]; ++j, ++page_count)
> +			input_page->gpa_page_list[page_count] = base_pfn + j;
> +	}
> +	status = hv_do_rep_hypercall(HVCALL_DEPOSIT_MEMORY,
> +				     page_count, 0, input_page,
> +				     NULL) & HV_HYPERCALL_RESULT_MASK;
> +	local_irq_restore(flags);
> +
> +	if (status != HV_STATUS_SUCCESS) {
> +		pr_err("Failed to deposit pages: %d\n", status);
> +		ret = status;
> +		goto err_free_allocations;
> +	}
> +
> +	ret = 0;
> +	goto free_buf;
> +
> +err_free_allocations:
> +	for (i = 0; i < num_allocations; ++i) {
> +		base_pfn = page_to_pfn(pages[i]);
> +		for (j = 0; j < counts[i]; ++j)
> +			__free_page(pfn_to_page(base_pfn + j));
> +	}
> +
> +free_buf:
> +	free_page((unsigned long)pages);
> +	kfree(counts);
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(hv_call_deposit_pages);
> +
> +int hv_call_add_logical_proc(int node, u32 lp_index, u32 apic_id)
> +{
> +	struct hv_add_logical_processor_in *input;
> +	struct hv_add_logical_processor_out *output;
> +	int status;
> +	unsigned long flags;
> +	int ret = 0;
> +
> +	/*
> +	 * When adding a logical processor, the hypervisor may return
> +	 * HV_STATUS_INSUFFICIENT_MEMORY. When that happens, we deposit more
> +	 * pages and retry.
> +	 */
> +	do {
> +		local_irq_save(flags);
> +
> +		input = *this_cpu_ptr(hyperv_pcpu_input_arg);
> +		/* We don't do anything with the output right now */
> +		output = *this_cpu_ptr(hyperv_pcpu_output_arg);
> +
> +		input->lp_index = lp_index;
> +		input->apic_id = apic_id;
> +		input->flags = 0;
> +		input->proximity_domain_info.domain_id = node_to_pxm(node);
> +		input->proximity_domain_info.flags.reserved = 0;
> +		input->proximity_domain_info.flags.proximity_info_valid = 1;
> +		input->proximity_domain_info.flags.proximity_preferred = 1;
> +		status = hv_do_hypercall(HVCALL_ADD_LOGICAL_PROCESSOR,
> +					 input, output);
> +		local_irq_restore(flags);
> +
> +		if (status != HV_STATUS_INSUFFICIENT_MEMORY) {
> +			if (status != HV_STATUS_SUCCESS) {
> +				pr_err("%s: cpu %u apic ID %u, %d\n", __func__,
> +				       lp_index, apic_id, status);
> +				ret = status;
> +			}
> +			break;
> +		}
> +		ret = hv_call_deposit_pages(node, hv_current_partition_id, 1);
> +	} while (!ret);
> +
> +	return ret;
> +}
> +
> +int hv_call_create_vp(int node, u64 partition_id, u32 vp_index, u32 flags)
> +{
> +	struct hv_create_vp *input;
> +	u16 status;
> +	unsigned long irq_flags;
> +	int ret = 0;
> +
> +	/* Root VPs don't seem to need pages deposited */
> +	if (partition_id != hv_current_partition_id) {
> +		ret = hv_call_deposit_pages(node, partition_id, 90);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	do {
> +		local_irq_save(irq_flags);
> +
> +		input = *this_cpu_ptr(hyperv_pcpu_input_arg);
> +
> +		input->partition_id = partition_id;
> +		input->vp_index = vp_index;
> +		input->flags = flags;
> +		input->subnode_type = HvSubnodeAny;
> +		if (node != NUMA_NO_NODE) {
> +			input->proximity_domain_info.domain_id = node_to_pxm(node);
> +			input->proximity_domain_info.flags.reserved = 0;
> +			input->proximity_domain_info.flags.proximity_info_valid = 1;
> +			input->proximity_domain_info.flags.proximity_preferred = 1;
> +		} else {
> +			input->proximity_domain_info.as_uint64 = 0;
> +		}
> +		status = hv_do_hypercall(HVCALL_CREATE_VP, input, NULL);
> +		local_irq_restore(irq_flags);
> +
> +		if (status != HV_STATUS_INSUFFICIENT_MEMORY) {
> +			if (status != HV_STATUS_SUCCESS) {
> +				pr_err("%s: vcpu %u, lp %u, %d\n", __func__,
> +				       vp_index, flags, status);
> +				ret = status;
> +			}
> +			break;
> +		}
> +		ret = hv_call_deposit_pages(node, partition_id, 1);
> +
> +	} while (!ret);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(hv_call_create_vp);
> +
> diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
> index 67f5d35a73d3..4e590a167160 100644
> --- a/arch/x86/include/asm/mshyperv.h
> +++ b/arch/x86/include/asm/mshyperv.h
> @@ -80,6 +80,10 @@ extern void  __percpu  **hyperv_pcpu_output_arg;
>  
>  extern u64 hv_current_partition_id;
>  
> +int hv_call_deposit_pages(int node, u64 partition_id, u32 num_pages);
> +int hv_call_add_logical_proc(int node, u32 lp_index, u32 acpi_id);
> +int hv_call_create_vp(int node, u64 partition_id, u32 vp_index, u32 flags);

You seem to be only doing EXPORT_SYMBOL_GPL() for
hv_call_deposit_pages() and hv_call_create_vp() but not for
hv_call_add_logical_proc() - is this intended? Also, I don't see
hv_call_create_vp()/hv_call_add_logical_proc() usage outside of
arch/x86/kernel/cpu/mshyperv.c so maybe we don't need to export them at all?

> +
>  static inline u64 hv_do_hypercall(u64 control, void *input, void *output)
>  {
>  	u64 input_address = input ? virt_to_phys(input) : 0;
> diff --git a/include/asm-generic/hyperv-tlfs.h b/include/asm-generic/hyperv-tlfs.h
> index 87b1a79b19eb..b6c74e1a5524 100644
> --- a/include/asm-generic/hyperv-tlfs.h
> +++ b/include/asm-generic/hyperv-tlfs.h
> @@ -142,6 +142,8 @@ struct ms_hyperv_tsc_page {
>  #define HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST_EX	0x0014
>  #define HVCALL_SEND_IPI_EX			0x0015
>  #define HVCALL_GET_PARTITION_ID			0x0046
> +#define HVCALL_DEPOSIT_MEMORY			0x0048
> +#define HVCALL_CREATE_VP			0x004e
>  #define HVCALL_GET_VP_REGISTERS			0x0050
>  #define HVCALL_SET_VP_REGISTERS			0x0051
>  #define HVCALL_POST_MESSAGE			0x005c
> @@ -149,6 +151,7 @@ struct ms_hyperv_tsc_page {
>  #define HVCALL_POST_DEBUG_DATA			0x0069
>  #define HVCALL_RETRIEVE_DEBUG_DATA		0x006a
>  #define HVCALL_RESET_DEBUG_SESSION		0x006b
> +#define HVCALL_ADD_LOGICAL_PROCESSOR		0x0076
>  #define HVCALL_RETARGET_INTERRUPT		0x007e
>  #define HVCALL_FLUSH_GUEST_PHYSICAL_ADDRESS_SPACE 0x00af
>  #define HVCALL_FLUSH_GUEST_PHYSICAL_ADDRESS_LIST 0x00b0
> @@ -413,6 +416,70 @@ struct hv_get_partition_id {
>  	u64 partition_id;
>  } __packed;
>  
> +/* HvDepositMemory hypercall */
> +struct hv_deposit_memory {
> +	u64 partition_id;
> +	u64 gpa_page_list[];
> +} __packed;
> +
> +struct hv_proximity_domain_flags {
> +	u32 proximity_preferred : 1;
> +	u32 reserved : 30;
> +	u32 proximity_info_valid : 1;
> +};
> +
> +/* Not a union in windows but useful for zeroing */
> +union hv_proximity_domain_info {
> +	struct {
> +		u32 domain_id;
> +		struct hv_proximity_domain_flags flags;
> +	};
> +	u64 as_uint64;
> +};
> +
> +struct hv_lp_startup_status {
> +	u64 hv_status;
> +	u64 substatus1;
> +	u64 substatus2;
> +	u64 substatus3;
> +	u64 substatus4;
> +	u64 substatus5;
> +	u64 substatus6;
> +};
> +
> +/* HvAddLogicalProcessor hypercall */
> +struct hv_add_logical_processor_in {
> +	u32 lp_index;
> +	u32 apic_id;
> +	union hv_proximity_domain_info proximity_domain_info;
> +	u64 flags;
> +};
> +
> +struct hv_add_logical_processor_out {
> +	struct hv_lp_startup_status startup_status;
> +};
> +
> +enum HV_SUBNODE_TYPE
> +{
> +    HvSubnodeAny = 0,
> +    HvSubnodeSocket,
> +    HvSubnodeAmdNode,
> +    HvSubnodeL3,
> +    HvSubnodeCount,
> +    HvSubnodeInvalid = -1
> +};
> +
> +/* HvCreateVp hypercall */
> +struct hv_create_vp {
> +	u64 partition_id;
> +	u32 vp_index;
> +	u8 padding[3];
> +	u8 subnode_type;
> +	u64 subnode_id;
> +	union hv_proximity_domain_info proximity_domain_info;
> +	u64 flags;
> +};

You add '__packed' to 'struct hv_deposit_memory' but not to 'struct
hv_create_vp'/'struct hv_add_logical_processor_in', this looks
inconsistent.

> +
>  /* HvRetargetDeviceInterrupt hypercall */
>  union hv_msi_entry {
>  	u64 as_uint64;

-- 
Vitaly


  reply	other threads:[~2020-11-12 15:57 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-05 16:57 [PATCH v2 00/17] Introducing Linux root partition support for Microsoft Hypervisor Wei Liu
2020-11-05 16:57 ` [PATCH v2 01/17] asm-generic/hyperv: change HV_CPU_POWER_MANAGEMENT to HV_CPU_MANAGEMENT Wei Liu
2020-11-12 15:14   ` Vitaly Kuznetsov
2020-11-05 16:57 ` [PATCH v2 02/17] x86/hyperv: detect if Linux is the root partition Wei Liu
2020-11-05 19:16   ` kernel test robot
2020-11-12 11:42     ` Wei Liu
2020-11-12 11:46       ` Wei Liu
2020-11-12 12:22         ` Wei Liu
2020-11-05 20:23   ` kernel test robot
2020-11-12 15:16   ` Vitaly Kuznetsov
2020-11-12 15:51     ` Wei Liu
2020-11-05 16:58 ` [PATCH v2 03/17] Drivers: hv: vmbus: skip VMBus initialization if Linux is root Wei Liu
2020-11-12 15:24   ` Vitaly Kuznetsov
2020-11-13 14:51     ` Wei Liu
2020-11-05 16:58 ` [PATCH v2 04/17] iommu/hyperv: don't setup IRQ remapping when running as root Wei Liu
2020-11-12 15:27   ` Vitaly Kuznetsov
2020-11-13 14:53     ` Wei Liu
2020-11-05 16:58 ` [PATCH v2 05/17] clocksource/hyperv: use MSR-based access if " Wei Liu
2020-11-12  9:56   ` Daniel Lezcano
2020-11-12 11:24     ` Wei Liu
2020-11-12 11:40       ` Daniel Lezcano
2020-11-12 11:42         ` Wei Liu
2020-11-12 15:30   ` Vitaly Kuznetsov
2020-11-12 15:52     ` Wei Liu
2020-11-05 16:58 ` [PATCH v2 06/17] x86/hyperv: allocate output arg pages if required Wei Liu
2020-11-12 15:35   ` Vitaly Kuznetsov
2020-11-13 15:05     ` Wei Liu
2020-11-05 16:58 ` [PATCH v2 07/17] x86/hyperv: extract partition ID from Microsoft Hypervisor if necessary Wei Liu
2020-11-05 20:07   ` kernel test robot
2020-11-12 11:54     ` Wei Liu
2020-11-05 20:20   ` kernel test robot
2020-11-12 15:44   ` Vitaly Kuznetsov
2020-11-13 15:21     ` Wei Liu
2020-11-05 16:58 ` [PATCH v2 08/17] x86/hyperv: handling hypercall page setup for root Wei Liu
2020-11-12 15:51   ` Vitaly Kuznetsov
2020-11-13 15:33     ` Wei Liu
2020-11-13 16:09       ` Wei Liu
2020-11-13 16:16         ` Vitaly Kuznetsov
2020-11-05 16:58 ` [PATCH v2 09/17] x86/hyperv: provide a bunch of helper functions Wei Liu
2020-11-12 15:57   ` Vitaly Kuznetsov [this message]
2020-11-13 15:51     ` Wei Liu
2020-11-13 16:13       ` Vitaly Kuznetsov
2020-11-16 11:41         ` Wei Liu
2020-11-05 16:58 ` [PATCH v2 10/17] x86/hyperv: implement and use hv_smp_prepare_cpus Wei Liu
2020-11-12 16:44   ` Vitaly Kuznetsov
2020-11-13 15:56     ` Wei Liu
2020-11-05 16:58 ` [PATCH v2 11/17] asm-generic/hyperv: update hv_msi_entry Wei Liu
2020-11-05 16:58 ` [PATCH v2 12/17] asm-generic/hyperv: update hv_interrupt_entry Wei Liu
2020-11-05 16:58 ` [PATCH v2 13/17] asm-generic/hyperv: introduce hv_device_id and auxiliary structures Wei Liu
2020-11-05 16:58 ` [PATCH v2 14/17] asm-generic/hyperv: import data structures for mapping device interrupts Wei Liu
2020-11-05 16:58 ` [PATCH v2 15/17] x86/hyperv: implement an MSI domain for root partition Wei Liu
2020-11-12 13:50   ` Wei Liu
2020-11-05 16:58 ` [PATCH v2 16/17] x86/ioapic: export a few functions and data structures via io_apic.h Wei Liu
2020-11-12 11:39   ` Wei Liu
2020-11-05 16:58 ` [PATCH v2 17/17] x86/hyperv: handle IO-APIC when running as root Wei Liu
2020-11-12 16:56   ` Vitaly Kuznetsov
2020-11-13 16:01     ` Wei Liu
2020-11-13 16:04       ` Wei Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=871rgyy3d1.fsf@vitty.brq.redhat.com \
    --to=vkuznets@redhat.com \
    --cc=arnd@arndb.de \
    --cc=bp@alien8.de \
    --cc=haiyangz@microsoft.com \
    --cc=hpa@zytor.com \
    --cc=kys@microsoft.com \
    --cc=ligrassi@microsoft.com \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mikelley@microsoft.com \
    --cc=mingo@redhat.com \
    --cc=nunodasneves@linux.microsoft.com \
    --cc=sthemmin@microsoft.com \
    --cc=sunilmut@microsoft.com \
    --cc=tglx@linutronix.de \
    --cc=viremana@linux.microsoft.com \
    --cc=virtualization@lists.linux-foundation.org \
    --cc=wei.liu@kernel.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).