* [PATCH 3/8] i2c: break out smbus support into seperate file
2017-05-26 8:20 [PATCH 0/8] i2c: refactor core and break out blocks Wolfram Sang
2017-05-26 8:20 ` [PATCH 1/8] i2c: rename core source file to allow refactorization Wolfram Sang
2017-05-26 8:20 ` [PATCH 2/8] i2c: break out slave support into seperate file Wolfram Sang
@ 2017-05-26 8:20 ` Wolfram Sang
2017-05-26 8:20 ` [PATCH 4/8] i2c: break out OF " Wolfram Sang
` (6 subsequent siblings)
9 siblings, 0 replies; 17+ messages in thread
From: Wolfram Sang @ 2017-05-26 8:20 UTC (permalink / raw)
To: linux-i2c
Cc: Jean Delvare, linux-acpi, Wolfram Sang, Jonathan Corbet,
Steven Rostedt, Ingo Molnar, linux-doc, linux-kernel
Break out the exported SMBus functions and the emulation layer into a
seperate file. This also involved splitting up the tracing header into
an I2C and an SMBus part.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
Documentation/driver-api/i2c.rst | 3 +
drivers/i2c/Makefile | 2 +-
drivers/i2c/i2c-core-base.c | 574 -------------------------------------
drivers/i2c/i2c-core-smbus.c | 594 +++++++++++++++++++++++++++++++++++++++
include/trace/events/i2c.h | 226 +--------------
include/trace/events/smbus.h | 249 ++++++++++++++++
6 files changed, 849 insertions(+), 799 deletions(-)
create mode 100644 drivers/i2c/i2c-core-smbus.c
create mode 100644 include/trace/events/smbus.h
diff --git a/Documentation/driver-api/i2c.rst b/Documentation/driver-api/i2c.rst
index 67366d9ff7303f..7582c079d74795 100644
--- a/Documentation/driver-api/i2c.rst
+++ b/Documentation/driver-api/i2c.rst
@@ -43,3 +43,6 @@ i2c_adapter devices which don't support those I2C operations.
.. kernel-doc:: drivers/i2c/i2c-core-base.c
:export:
+
+.. kernel-doc:: drivers/i2c/i2c-core-smbus.c
+ :export:
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 6c54716e7f28ca..a6a90fe2db887a 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -4,7 +4,7 @@
obj-$(CONFIG_I2C_BOARDINFO) += i2c-boardinfo.o
obj-$(CONFIG_I2C) += i2c-core.o
-i2c-core-objs := i2c-core-base.o
+i2c-core-objs := i2c-core-base.o i2c-core-smbus.o
i2c-core-$(CONFIG_I2C_SLAVE) += i2c-core-slave.o
obj-$(CONFIG_I2C_SMBUS) += i2c-smbus.o
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 88c0ca664a7b8f..70fc4624c69c25 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -14,9 +14,6 @@
/* ------------------------------------------------------------------------- */
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>.
- All SMBus-related things are written by Frodo Looijaard <frodol@dds.nl>
- SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and
- Jean Delvare <jdelvare@suse.de>
Mux support by Rodolfo Giometti <giometti@enneenne.com> and
Michael Lawnick <michael.lawnick.ext@nsn.com>
OF support is copyright (c) 2008 Jochen Friedrich <jochen@scram.de>
@@ -3155,577 +3152,6 @@ void i2c_put_adapter(struct i2c_adapter *adap)
}
EXPORT_SYMBOL(i2c_put_adapter);
-/* The SMBus parts */
-
-#define POLY (0x1070U << 3)
-static u8 crc8(u16 data)
-{
- int i;
-
- for (i = 0; i < 8; i++) {
- if (data & 0x8000)
- data = data ^ POLY;
- data = data << 1;
- }
- return (u8)(data >> 8);
-}
-
-/* Incremental CRC8 over count bytes in the array pointed to by p */
-static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count)
-{
- int i;
-
- for (i = 0; i < count; i++)
- crc = crc8((crc ^ p[i]) << 8);
- return crc;
-}
-
-/* Assume a 7-bit address, which is reasonable for SMBus */
-static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg)
-{
- /* The address will be sent first */
- u8 addr = i2c_8bit_addr_from_msg(msg);
- pec = i2c_smbus_pec(pec, &addr, 1);
-
- /* The data buffer follows */
- return i2c_smbus_pec(pec, msg->buf, msg->len);
-}
-
-/* Used for write only transactions */
-static inline void i2c_smbus_add_pec(struct i2c_msg *msg)
-{
- msg->buf[msg->len] = i2c_smbus_msg_pec(0, msg);
- msg->len++;
-}
-
-/* Return <0 on CRC error
- If there was a write before this read (most cases) we need to take the
- partial CRC from the write part into account.
- Note that this function does modify the message (we need to decrease the
- message length to hide the CRC byte from the caller). */
-static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg)
-{
- u8 rpec = msg->buf[--msg->len];
- cpec = i2c_smbus_msg_pec(cpec, msg);
-
- if (rpec != cpec) {
- pr_debug("Bad PEC 0x%02x vs. 0x%02x\n",
- rpec, cpec);
- return -EBADMSG;
- }
- return 0;
-}
-
-/**
- * i2c_smbus_read_byte - SMBus "receive byte" protocol
- * @client: Handle to slave device
- *
- * This executes the SMBus "receive byte" protocol, returning negative errno
- * else the byte received from the device.
- */
-s32 i2c_smbus_read_byte(const struct i2c_client *client)
-{
- union i2c_smbus_data data;
- int status;
-
- status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_READ, 0,
- I2C_SMBUS_BYTE, &data);
- return (status < 0) ? status : data.byte;
-}
-EXPORT_SYMBOL(i2c_smbus_read_byte);
-
-/**
- * i2c_smbus_write_byte - SMBus "send byte" protocol
- * @client: Handle to slave device
- * @value: Byte to be sent
- *
- * This executes the SMBus "send byte" protocol, returning negative errno
- * else zero on success.
- */
-s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value)
-{
- return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
-}
-EXPORT_SYMBOL(i2c_smbus_write_byte);
-
-/**
- * i2c_smbus_read_byte_data - SMBus "read byte" protocol
- * @client: Handle to slave device
- * @command: Byte interpreted by slave
- *
- * This executes the SMBus "read byte" protocol, returning negative errno
- * else a data byte received from the device.
- */
-s32 i2c_smbus_read_byte_data(const struct i2c_client *client, u8 command)
-{
- union i2c_smbus_data data;
- int status;
-
- status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_READ, command,
- I2C_SMBUS_BYTE_DATA, &data);
- return (status < 0) ? status : data.byte;
-}
-EXPORT_SYMBOL(i2c_smbus_read_byte_data);
-
-/**
- * i2c_smbus_write_byte_data - SMBus "write byte" protocol
- * @client: Handle to slave device
- * @command: Byte interpreted by slave
- * @value: Byte being written
- *
- * This executes the SMBus "write byte" protocol, returning negative errno
- * else zero on success.
- */
-s32 i2c_smbus_write_byte_data(const struct i2c_client *client, u8 command,
- u8 value)
-{
- union i2c_smbus_data data;
- data.byte = value;
- return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_WRITE, command,
- I2C_SMBUS_BYTE_DATA, &data);
-}
-EXPORT_SYMBOL(i2c_smbus_write_byte_data);
-
-/**
- * i2c_smbus_read_word_data - SMBus "read word" protocol
- * @client: Handle to slave device
- * @command: Byte interpreted by slave
- *
- * This executes the SMBus "read word" protocol, returning negative errno
- * else a 16-bit unsigned "word" received from the device.
- */
-s32 i2c_smbus_read_word_data(const struct i2c_client *client, u8 command)
-{
- union i2c_smbus_data data;
- int status;
-
- status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_READ, command,
- I2C_SMBUS_WORD_DATA, &data);
- return (status < 0) ? status : data.word;
-}
-EXPORT_SYMBOL(i2c_smbus_read_word_data);
-
-/**
- * i2c_smbus_write_word_data - SMBus "write word" protocol
- * @client: Handle to slave device
- * @command: Byte interpreted by slave
- * @value: 16-bit "word" being written
- *
- * This executes the SMBus "write word" protocol, returning negative errno
- * else zero on success.
- */
-s32 i2c_smbus_write_word_data(const struct i2c_client *client, u8 command,
- u16 value)
-{
- union i2c_smbus_data data;
- data.word = value;
- return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_WRITE, command,
- I2C_SMBUS_WORD_DATA, &data);
-}
-EXPORT_SYMBOL(i2c_smbus_write_word_data);
-
-/**
- * i2c_smbus_read_block_data - SMBus "block read" protocol
- * @client: Handle to slave device
- * @command: Byte interpreted by slave
- * @values: Byte array into which data will be read; big enough to hold
- * the data returned by the slave. SMBus allows at most 32 bytes.
- *
- * This executes the SMBus "block read" protocol, returning negative errno
- * else the number of data bytes in the slave's response.
- *
- * Note that using this function requires that the client's adapter support
- * the I2C_FUNC_SMBUS_READ_BLOCK_DATA functionality. Not all adapter drivers
- * support this; its emulation through I2C messaging relies on a specific
- * mechanism (I2C_M_RECV_LEN) which may not be implemented.
- */
-s32 i2c_smbus_read_block_data(const struct i2c_client *client, u8 command,
- u8 *values)
-{
- union i2c_smbus_data data;
- int status;
-
- status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_READ, command,
- I2C_SMBUS_BLOCK_DATA, &data);
- if (status)
- return status;
-
- memcpy(values, &data.block[1], data.block[0]);
- return data.block[0];
-}
-EXPORT_SYMBOL(i2c_smbus_read_block_data);
-
-/**
- * i2c_smbus_write_block_data - SMBus "block write" protocol
- * @client: Handle to slave device
- * @command: Byte interpreted by slave
- * @length: Size of data block; SMBus allows at most 32 bytes
- * @values: Byte array which will be written.
- *
- * This executes the SMBus "block write" protocol, returning negative errno
- * else zero on success.
- */
-s32 i2c_smbus_write_block_data(const struct i2c_client *client, u8 command,
- u8 length, const u8 *values)
-{
- union i2c_smbus_data data;
-
- if (length > I2C_SMBUS_BLOCK_MAX)
- length = I2C_SMBUS_BLOCK_MAX;
- data.block[0] = length;
- memcpy(&data.block[1], values, length);
- return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_WRITE, command,
- I2C_SMBUS_BLOCK_DATA, &data);
-}
-EXPORT_SYMBOL(i2c_smbus_write_block_data);
-
-/* Returns the number of read bytes */
-s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client, u8 command,
- u8 length, u8 *values)
-{
- union i2c_smbus_data data;
- int status;
-
- if (length > I2C_SMBUS_BLOCK_MAX)
- length = I2C_SMBUS_BLOCK_MAX;
- data.block[0] = length;
- status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_READ, command,
- I2C_SMBUS_I2C_BLOCK_DATA, &data);
- if (status < 0)
- return status;
-
- memcpy(values, &data.block[1], data.block[0]);
- return data.block[0];
-}
-EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data);
-
-s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client, u8 command,
- u8 length, const u8 *values)
-{
- union i2c_smbus_data data;
-
- if (length > I2C_SMBUS_BLOCK_MAX)
- length = I2C_SMBUS_BLOCK_MAX;
- data.block[0] = length;
- memcpy(data.block + 1, values, length);
- return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_WRITE, command,
- I2C_SMBUS_I2C_BLOCK_DATA, &data);
-}
-EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data);
-
-/* Simulate a SMBus command using the i2c protocol
- No checking of parameters is done! */
-static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr,
- unsigned short flags,
- char read_write, u8 command, int size,
- union i2c_smbus_data *data)
-{
- /* So we need to generate a series of msgs. In the case of writing, we
- need to use only one message; when reading, we need two. We initialize
- most things with sane defaults, to keep the code below somewhat
- simpler. */
- unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3];
- unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2];
- int num = read_write == I2C_SMBUS_READ ? 2 : 1;
- int i;
- u8 partial_pec = 0;
- int status;
- struct i2c_msg msg[2] = {
- {
- .addr = addr,
- .flags = flags,
- .len = 1,
- .buf = msgbuf0,
- }, {
- .addr = addr,
- .flags = flags | I2C_M_RD,
- .len = 0,
- .buf = msgbuf1,
- },
- };
-
- msgbuf0[0] = command;
- switch (size) {
- case I2C_SMBUS_QUICK:
- msg[0].len = 0;
- /* Special case: The read/write field is used as data */
- msg[0].flags = flags | (read_write == I2C_SMBUS_READ ?
- I2C_M_RD : 0);
- num = 1;
- break;
- case I2C_SMBUS_BYTE:
- if (read_write == I2C_SMBUS_READ) {
- /* Special case: only a read! */
- msg[0].flags = I2C_M_RD | flags;
- num = 1;
- }
- break;
- case I2C_SMBUS_BYTE_DATA:
- if (read_write == I2C_SMBUS_READ)
- msg[1].len = 1;
- else {
- msg[0].len = 2;
- msgbuf0[1] = data->byte;
- }
- break;
- case I2C_SMBUS_WORD_DATA:
- if (read_write == I2C_SMBUS_READ)
- msg[1].len = 2;
- else {
- msg[0].len = 3;
- msgbuf0[1] = data->word & 0xff;
- msgbuf0[2] = data->word >> 8;
- }
- break;
- case I2C_SMBUS_PROC_CALL:
- num = 2; /* Special case */
- read_write = I2C_SMBUS_READ;
- msg[0].len = 3;
- msg[1].len = 2;
- msgbuf0[1] = data->word & 0xff;
- msgbuf0[2] = data->word >> 8;
- break;
- case I2C_SMBUS_BLOCK_DATA:
- if (read_write == I2C_SMBUS_READ) {
- msg[1].flags |= I2C_M_RECV_LEN;
- msg[1].len = 1; /* block length will be added by
- the underlying bus driver */
- } else {
- msg[0].len = data->block[0] + 2;
- if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 2) {
- dev_err(&adapter->dev,
- "Invalid block write size %d\n",
- data->block[0]);
- return -EINVAL;
- }
- for (i = 1; i < msg[0].len; i++)
- msgbuf0[i] = data->block[i-1];
- }
- break;
- case I2C_SMBUS_BLOCK_PROC_CALL:
- num = 2; /* Another special case */
- read_write = I2C_SMBUS_READ;
- if (data->block[0] > I2C_SMBUS_BLOCK_MAX) {
- dev_err(&adapter->dev,
- "Invalid block write size %d\n",
- data->block[0]);
- return -EINVAL;
- }
- msg[0].len = data->block[0] + 2;
- for (i = 1; i < msg[0].len; i++)
- msgbuf0[i] = data->block[i-1];
- msg[1].flags |= I2C_M_RECV_LEN;
- msg[1].len = 1; /* block length will be added by
- the underlying bus driver */
- break;
- case I2C_SMBUS_I2C_BLOCK_DATA:
- if (read_write == I2C_SMBUS_READ) {
- msg[1].len = data->block[0];
- } else {
- msg[0].len = data->block[0] + 1;
- if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) {
- dev_err(&adapter->dev,
- "Invalid block write size %d\n",
- data->block[0]);
- return -EINVAL;
- }
- for (i = 1; i <= data->block[0]; i++)
- msgbuf0[i] = data->block[i];
- }
- break;
- default:
- dev_err(&adapter->dev, "Unsupported transaction %d\n", size);
- return -EOPNOTSUPP;
- }
-
- i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK
- && size != I2C_SMBUS_I2C_BLOCK_DATA);
- if (i) {
- /* Compute PEC if first message is a write */
- if (!(msg[0].flags & I2C_M_RD)) {
- if (num == 1) /* Write only */
- i2c_smbus_add_pec(&msg[0]);
- else /* Write followed by read */
- partial_pec = i2c_smbus_msg_pec(0, &msg[0]);
- }
- /* Ask for PEC if last message is a read */
- if (msg[num-1].flags & I2C_M_RD)
- msg[num-1].len++;
- }
-
- status = i2c_transfer(adapter, msg, num);
- if (status < 0)
- return status;
-
- /* Check PEC if last message is a read */
- if (i && (msg[num-1].flags & I2C_M_RD)) {
- status = i2c_smbus_check_pec(partial_pec, &msg[num-1]);
- if (status < 0)
- return status;
- }
-
- if (read_write == I2C_SMBUS_READ)
- switch (size) {
- case I2C_SMBUS_BYTE:
- data->byte = msgbuf0[0];
- break;
- case I2C_SMBUS_BYTE_DATA:
- data->byte = msgbuf1[0];
- break;
- case I2C_SMBUS_WORD_DATA:
- case I2C_SMBUS_PROC_CALL:
- data->word = msgbuf1[0] | (msgbuf1[1] << 8);
- break;
- case I2C_SMBUS_I2C_BLOCK_DATA:
- for (i = 0; i < data->block[0]; i++)
- data->block[i+1] = msgbuf1[i];
- break;
- case I2C_SMBUS_BLOCK_DATA:
- case I2C_SMBUS_BLOCK_PROC_CALL:
- for (i = 0; i < msgbuf1[0] + 1; i++)
- data->block[i] = msgbuf1[i];
- break;
- }
- return 0;
-}
-
-/**
- * i2c_smbus_xfer - execute SMBus protocol operations
- * @adapter: Handle to I2C bus
- * @addr: Address of SMBus slave on that bus
- * @flags: I2C_CLIENT_* flags (usually zero or I2C_CLIENT_PEC)
- * @read_write: I2C_SMBUS_READ or I2C_SMBUS_WRITE
- * @command: Byte interpreted by slave, for protocols which use such bytes
- * @protocol: SMBus protocol operation to execute, such as I2C_SMBUS_PROC_CALL
- * @data: Data to be read or written
- *
- * This executes an SMBus protocol operation, and returns a negative
- * errno code else zero on success.
- */
-s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
- char read_write, u8 command, int protocol,
- union i2c_smbus_data *data)
-{
- unsigned long orig_jiffies;
- int try;
- s32 res;
-
- /* If enabled, the following two tracepoints are conditional on
- * read_write and protocol.
- */
- trace_smbus_write(adapter, addr, flags, read_write,
- command, protocol, data);
- trace_smbus_read(adapter, addr, flags, read_write,
- command, protocol);
-
- flags &= I2C_M_TEN | I2C_CLIENT_PEC | I2C_CLIENT_SCCB;
-
- if (adapter->algo->smbus_xfer) {
- i2c_lock_bus(adapter, I2C_LOCK_SEGMENT);
-
- /* Retry automatically on arbitration loss */
- orig_jiffies = jiffies;
- for (res = 0, try = 0; try <= adapter->retries; try++) {
- res = adapter->algo->smbus_xfer(adapter, addr, flags,
- read_write, command,
- protocol, data);
- if (res != -EAGAIN)
- break;
- if (time_after(jiffies,
- orig_jiffies + adapter->timeout))
- break;
- }
- i2c_unlock_bus(adapter, I2C_LOCK_SEGMENT);
-
- if (res != -EOPNOTSUPP || !adapter->algo->master_xfer)
- goto trace;
- /*
- * Fall back to i2c_smbus_xfer_emulated if the adapter doesn't
- * implement native support for the SMBus operation.
- */
- }
-
- res = i2c_smbus_xfer_emulated(adapter, addr, flags, read_write,
- command, protocol, data);
-
-trace:
- /* If enabled, the reply tracepoint is conditional on read_write. */
- trace_smbus_reply(adapter, addr, flags, read_write,
- command, protocol, data);
- trace_smbus_result(adapter, addr, flags, read_write,
- command, protocol, res);
-
- return res;
-}
-EXPORT_SYMBOL(i2c_smbus_xfer);
-
-/**
- * i2c_smbus_read_i2c_block_data_or_emulated - read block or emulate
- * @client: Handle to slave device
- * @command: Byte interpreted by slave
- * @length: Size of data block; SMBus allows at most I2C_SMBUS_BLOCK_MAX bytes
- * @values: Byte array into which data will be read; big enough to hold
- * the data returned by the slave. SMBus allows at most
- * I2C_SMBUS_BLOCK_MAX bytes.
- *
- * This executes the SMBus "block read" protocol if supported by the adapter.
- * If block read is not supported, it emulates it using either word or byte
- * read protocols depending on availability.
- *
- * The addresses of the I2C slave device that are accessed with this function
- * must be mapped to a linear region, so that a block read will have the same
- * effect as a byte read. Before using this function you must double-check
- * if the I2C slave does support exchanging a block transfer with a byte
- * transfer.
- */
-s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client,
- u8 command, u8 length, u8 *values)
-{
- u8 i = 0;
- int status;
-
- if (length > I2C_SMBUS_BLOCK_MAX)
- length = I2C_SMBUS_BLOCK_MAX;
-
- if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK))
- return i2c_smbus_read_i2c_block_data(client, command, length, values);
-
- if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA))
- return -EOPNOTSUPP;
-
- if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)) {
- while ((i + 2) <= length) {
- status = i2c_smbus_read_word_data(client, command + i);
- if (status < 0)
- return status;
- values[i] = status & 0xff;
- values[i + 1] = status >> 8;
- i += 2;
- }
- }
-
- while (i < length) {
- status = i2c_smbus_read_byte_data(client, command + i);
- if (status < 0)
- return status;
- values[i] = status;
- i++;
- }
-
- return i;
-}
-EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data_or_emulated);
-
MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
MODULE_DESCRIPTION("I2C-Bus main module");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c
new file mode 100644
index 00000000000000..10f00a82ec9dba
--- /dev/null
+++ b/drivers/i2c/i2c-core-smbus.c
@@ -0,0 +1,594 @@
+/*
+ * Linux I2C core SMBus and SMBus emulation code
+ *
+ * This file contains the SMBus functions which are always included in the I2C
+ * core because they can be emulated via I2C. SMBus specific extensions
+ * (e.g. smbalert) are handled in a seperate i2c-smbus module.
+ *
+ * All SMBus-related things are written by Frodo Looijaard <frodol@dds.nl>
+ * SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and
+ * Jean Delvare <jdelvare@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/smbus.h>
+
+
+/* The SMBus parts */
+
+#define POLY (0x1070U << 3)
+static u8 crc8(u16 data)
+{
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ if (data & 0x8000)
+ data = data ^ POLY;
+ data = data << 1;
+ }
+ return (u8)(data >> 8);
+}
+
+/* Incremental CRC8 over count bytes in the array pointed to by p */
+static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count)
+{
+ int i;
+
+ for (i = 0; i < count; i++)
+ crc = crc8((crc ^ p[i]) << 8);
+ return crc;
+}
+
+/* Assume a 7-bit address, which is reasonable for SMBus */
+static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg)
+{
+ /* The address will be sent first */
+ u8 addr = i2c_8bit_addr_from_msg(msg);
+ pec = i2c_smbus_pec(pec, &addr, 1);
+
+ /* The data buffer follows */
+ return i2c_smbus_pec(pec, msg->buf, msg->len);
+}
+
+/* Used for write only transactions */
+static inline void i2c_smbus_add_pec(struct i2c_msg *msg)
+{
+ msg->buf[msg->len] = i2c_smbus_msg_pec(0, msg);
+ msg->len++;
+}
+
+/* Return <0 on CRC error
+ If there was a write before this read (most cases) we need to take the
+ partial CRC from the write part into account.
+ Note that this function does modify the message (we need to decrease the
+ message length to hide the CRC byte from the caller). */
+static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg)
+{
+ u8 rpec = msg->buf[--msg->len];
+ cpec = i2c_smbus_msg_pec(cpec, msg);
+
+ if (rpec != cpec) {
+ pr_debug("Bad PEC 0x%02x vs. 0x%02x\n",
+ rpec, cpec);
+ return -EBADMSG;
+ }
+ return 0;
+}
+
+/**
+ * i2c_smbus_read_byte - SMBus "receive byte" protocol
+ * @client: Handle to slave device
+ *
+ * This executes the SMBus "receive byte" protocol, returning negative errno
+ * else the byte received from the device.
+ */
+s32 i2c_smbus_read_byte(const struct i2c_client *client)
+{
+ union i2c_smbus_data data;
+ int status;
+
+ status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_READ, 0,
+ I2C_SMBUS_BYTE, &data);
+ return (status < 0) ? status : data.byte;
+}
+EXPORT_SYMBOL(i2c_smbus_read_byte);
+
+/**
+ * i2c_smbus_write_byte - SMBus "send byte" protocol
+ * @client: Handle to slave device
+ * @value: Byte to be sent
+ *
+ * This executes the SMBus "send byte" protocol, returning negative errno
+ * else zero on success.
+ */
+s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value)
+{
+ return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
+}
+EXPORT_SYMBOL(i2c_smbus_write_byte);
+
+/**
+ * i2c_smbus_read_byte_data - SMBus "read byte" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ *
+ * This executes the SMBus "read byte" protocol, returning negative errno
+ * else a data byte received from the device.
+ */
+s32 i2c_smbus_read_byte_data(const struct i2c_client *client, u8 command)
+{
+ union i2c_smbus_data data;
+ int status;
+
+ status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_READ, command,
+ I2C_SMBUS_BYTE_DATA, &data);
+ return (status < 0) ? status : data.byte;
+}
+EXPORT_SYMBOL(i2c_smbus_read_byte_data);
+
+/**
+ * i2c_smbus_write_byte_data - SMBus "write byte" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @value: Byte being written
+ *
+ * This executes the SMBus "write byte" protocol, returning negative errno
+ * else zero on success.
+ */
+s32 i2c_smbus_write_byte_data(const struct i2c_client *client, u8 command,
+ u8 value)
+{
+ union i2c_smbus_data data;
+ data.byte = value;
+ return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_WRITE, command,
+ I2C_SMBUS_BYTE_DATA, &data);
+}
+EXPORT_SYMBOL(i2c_smbus_write_byte_data);
+
+/**
+ * i2c_smbus_read_word_data - SMBus "read word" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ *
+ * This executes the SMBus "read word" protocol, returning negative errno
+ * else a 16-bit unsigned "word" received from the device.
+ */
+s32 i2c_smbus_read_word_data(const struct i2c_client *client, u8 command)
+{
+ union i2c_smbus_data data;
+ int status;
+
+ status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_READ, command,
+ I2C_SMBUS_WORD_DATA, &data);
+ return (status < 0) ? status : data.word;
+}
+EXPORT_SYMBOL(i2c_smbus_read_word_data);
+
+/**
+ * i2c_smbus_write_word_data - SMBus "write word" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @value: 16-bit "word" being written
+ *
+ * This executes the SMBus "write word" protocol, returning negative errno
+ * else zero on success.
+ */
+s32 i2c_smbus_write_word_data(const struct i2c_client *client, u8 command,
+ u16 value)
+{
+ union i2c_smbus_data data;
+ data.word = value;
+ return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_WRITE, command,
+ I2C_SMBUS_WORD_DATA, &data);
+}
+EXPORT_SYMBOL(i2c_smbus_write_word_data);
+
+/**
+ * i2c_smbus_read_block_data - SMBus "block read" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @values: Byte array into which data will be read; big enough to hold
+ * the data returned by the slave. SMBus allows at most 32 bytes.
+ *
+ * This executes the SMBus "block read" protocol, returning negative errno
+ * else the number of data bytes in the slave's response.
+ *
+ * Note that using this function requires that the client's adapter support
+ * the I2C_FUNC_SMBUS_READ_BLOCK_DATA functionality. Not all adapter drivers
+ * support this; its emulation through I2C messaging relies on a specific
+ * mechanism (I2C_M_RECV_LEN) which may not be implemented.
+ */
+s32 i2c_smbus_read_block_data(const struct i2c_client *client, u8 command,
+ u8 *values)
+{
+ union i2c_smbus_data data;
+ int status;
+
+ status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_READ, command,
+ I2C_SMBUS_BLOCK_DATA, &data);
+ if (status)
+ return status;
+
+ memcpy(values, &data.block[1], data.block[0]);
+ return data.block[0];
+}
+EXPORT_SYMBOL(i2c_smbus_read_block_data);
+
+/**
+ * i2c_smbus_write_block_data - SMBus "block write" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @length: Size of data block; SMBus allows at most 32 bytes
+ * @values: Byte array which will be written.
+ *
+ * This executes the SMBus "block write" protocol, returning negative errno
+ * else zero on success.
+ */
+s32 i2c_smbus_write_block_data(const struct i2c_client *client, u8 command,
+ u8 length, const u8 *values)
+{
+ union i2c_smbus_data data;
+
+ if (length > I2C_SMBUS_BLOCK_MAX)
+ length = I2C_SMBUS_BLOCK_MAX;
+ data.block[0] = length;
+ memcpy(&data.block[1], values, length);
+ return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_WRITE, command,
+ I2C_SMBUS_BLOCK_DATA, &data);
+}
+EXPORT_SYMBOL(i2c_smbus_write_block_data);
+
+/* Returns the number of read bytes */
+s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client, u8 command,
+ u8 length, u8 *values)
+{
+ union i2c_smbus_data data;
+ int status;
+
+ if (length > I2C_SMBUS_BLOCK_MAX)
+ length = I2C_SMBUS_BLOCK_MAX;
+ data.block[0] = length;
+ status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_READ, command,
+ I2C_SMBUS_I2C_BLOCK_DATA, &data);
+ if (status < 0)
+ return status;
+
+ memcpy(values, &data.block[1], data.block[0]);
+ return data.block[0];
+}
+EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data);
+
+s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client, u8 command,
+ u8 length, const u8 *values)
+{
+ union i2c_smbus_data data;
+
+ if (length > I2C_SMBUS_BLOCK_MAX)
+ length = I2C_SMBUS_BLOCK_MAX;
+ data.block[0] = length;
+ memcpy(data.block + 1, values, length);
+ return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_WRITE, command,
+ I2C_SMBUS_I2C_BLOCK_DATA, &data);
+}
+EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data);
+
+/* Simulate a SMBus command using the i2c protocol
+ No checking of parameters is done! */
+static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr,
+ unsigned short flags,
+ char read_write, u8 command, int size,
+ union i2c_smbus_data *data)
+{
+ /* So we need to generate a series of msgs. In the case of writing, we
+ need to use only one message; when reading, we need two. We initialize
+ most things with sane defaults, to keep the code below somewhat
+ simpler. */
+ unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3];
+ unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2];
+ int num = read_write == I2C_SMBUS_READ ? 2 : 1;
+ int i;
+ u8 partial_pec = 0;
+ int status;
+ struct i2c_msg msg[2] = {
+ {
+ .addr = addr,
+ .flags = flags,
+ .len = 1,
+ .buf = msgbuf0,
+ }, {
+ .addr = addr,
+ .flags = flags | I2C_M_RD,
+ .len = 0,
+ .buf = msgbuf1,
+ },
+ };
+
+ msgbuf0[0] = command;
+ switch (size) {
+ case I2C_SMBUS_QUICK:
+ msg[0].len = 0;
+ /* Special case: The read/write field is used as data */
+ msg[0].flags = flags | (read_write == I2C_SMBUS_READ ?
+ I2C_M_RD : 0);
+ num = 1;
+ break;
+ case I2C_SMBUS_BYTE:
+ if (read_write == I2C_SMBUS_READ) {
+ /* Special case: only a read! */
+ msg[0].flags = I2C_M_RD | flags;
+ num = 1;
+ }
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ if (read_write == I2C_SMBUS_READ)
+ msg[1].len = 1;
+ else {
+ msg[0].len = 2;
+ msgbuf0[1] = data->byte;
+ }
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ if (read_write == I2C_SMBUS_READ)
+ msg[1].len = 2;
+ else {
+ msg[0].len = 3;
+ msgbuf0[1] = data->word & 0xff;
+ msgbuf0[2] = data->word >> 8;
+ }
+ break;
+ case I2C_SMBUS_PROC_CALL:
+ num = 2; /* Special case */
+ read_write = I2C_SMBUS_READ;
+ msg[0].len = 3;
+ msg[1].len = 2;
+ msgbuf0[1] = data->word & 0xff;
+ msgbuf0[2] = data->word >> 8;
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ if (read_write == I2C_SMBUS_READ) {
+ msg[1].flags |= I2C_M_RECV_LEN;
+ msg[1].len = 1; /* block length will be added by
+ the underlying bus driver */
+ } else {
+ msg[0].len = data->block[0] + 2;
+ if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 2) {
+ dev_err(&adapter->dev,
+ "Invalid block write size %d\n",
+ data->block[0]);
+ return -EINVAL;
+ }
+ for (i = 1; i < msg[0].len; i++)
+ msgbuf0[i] = data->block[i-1];
+ }
+ break;
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ num = 2; /* Another special case */
+ read_write = I2C_SMBUS_READ;
+ if (data->block[0] > I2C_SMBUS_BLOCK_MAX) {
+ dev_err(&adapter->dev,
+ "Invalid block write size %d\n",
+ data->block[0]);
+ return -EINVAL;
+ }
+ msg[0].len = data->block[0] + 2;
+ for (i = 1; i < msg[0].len; i++)
+ msgbuf0[i] = data->block[i-1];
+ msg[1].flags |= I2C_M_RECV_LEN;
+ msg[1].len = 1; /* block length will be added by
+ the underlying bus driver */
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ if (read_write == I2C_SMBUS_READ) {
+ msg[1].len = data->block[0];
+ } else {
+ msg[0].len = data->block[0] + 1;
+ if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) {
+ dev_err(&adapter->dev,
+ "Invalid block write size %d\n",
+ data->block[0]);
+ return -EINVAL;
+ }
+ for (i = 1; i <= data->block[0]; i++)
+ msgbuf0[i] = data->block[i];
+ }
+ break;
+ default:
+ dev_err(&adapter->dev, "Unsupported transaction %d\n", size);
+ return -EOPNOTSUPP;
+ }
+
+ i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK
+ && size != I2C_SMBUS_I2C_BLOCK_DATA);
+ if (i) {
+ /* Compute PEC if first message is a write */
+ if (!(msg[0].flags & I2C_M_RD)) {
+ if (num == 1) /* Write only */
+ i2c_smbus_add_pec(&msg[0]);
+ else /* Write followed by read */
+ partial_pec = i2c_smbus_msg_pec(0, &msg[0]);
+ }
+ /* Ask for PEC if last message is a read */
+ if (msg[num-1].flags & I2C_M_RD)
+ msg[num-1].len++;
+ }
+
+ status = i2c_transfer(adapter, msg, num);
+ if (status < 0)
+ return status;
+
+ /* Check PEC if last message is a read */
+ if (i && (msg[num-1].flags & I2C_M_RD)) {
+ status = i2c_smbus_check_pec(partial_pec, &msg[num-1]);
+ if (status < 0)
+ return status;
+ }
+
+ if (read_write == I2C_SMBUS_READ)
+ switch (size) {
+ case I2C_SMBUS_BYTE:
+ data->byte = msgbuf0[0];
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ data->byte = msgbuf1[0];
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ case I2C_SMBUS_PROC_CALL:
+ data->word = msgbuf1[0] | (msgbuf1[1] << 8);
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ for (i = 0; i < data->block[0]; i++)
+ data->block[i+1] = msgbuf1[i];
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ for (i = 0; i < msgbuf1[0] + 1; i++)
+ data->block[i] = msgbuf1[i];
+ break;
+ }
+ return 0;
+}
+
+/**
+ * i2c_smbus_xfer - execute SMBus protocol operations
+ * @adapter: Handle to I2C bus
+ * @addr: Address of SMBus slave on that bus
+ * @flags: I2C_CLIENT_* flags (usually zero or I2C_CLIENT_PEC)
+ * @read_write: I2C_SMBUS_READ or I2C_SMBUS_WRITE
+ * @command: Byte interpreted by slave, for protocols which use such bytes
+ * @protocol: SMBus protocol operation to execute, such as I2C_SMBUS_PROC_CALL
+ * @data: Data to be read or written
+ *
+ * This executes an SMBus protocol operation, and returns a negative
+ * errno code else zero on success.
+ */
+s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
+ char read_write, u8 command, int protocol,
+ union i2c_smbus_data *data)
+{
+ unsigned long orig_jiffies;
+ int try;
+ s32 res;
+
+ /* If enabled, the following two tracepoints are conditional on
+ * read_write and protocol.
+ */
+ trace_smbus_write(adapter, addr, flags, read_write,
+ command, protocol, data);
+ trace_smbus_read(adapter, addr, flags, read_write,
+ command, protocol);
+
+ flags &= I2C_M_TEN | I2C_CLIENT_PEC | I2C_CLIENT_SCCB;
+
+ if (adapter->algo->smbus_xfer) {
+ i2c_lock_bus(adapter, I2C_LOCK_SEGMENT);
+
+ /* Retry automatically on arbitration loss */
+ orig_jiffies = jiffies;
+ for (res = 0, try = 0; try <= adapter->retries; try++) {
+ res = adapter->algo->smbus_xfer(adapter, addr, flags,
+ read_write, command,
+ protocol, data);
+ if (res != -EAGAIN)
+ break;
+ if (time_after(jiffies,
+ orig_jiffies + adapter->timeout))
+ break;
+ }
+ i2c_unlock_bus(adapter, I2C_LOCK_SEGMENT);
+
+ if (res != -EOPNOTSUPP || !adapter->algo->master_xfer)
+ goto trace;
+ /*
+ * Fall back to i2c_smbus_xfer_emulated if the adapter doesn't
+ * implement native support for the SMBus operation.
+ */
+ }
+
+ res = i2c_smbus_xfer_emulated(adapter, addr, flags, read_write,
+ command, protocol, data);
+
+trace:
+ /* If enabled, the reply tracepoint is conditional on read_write. */
+ trace_smbus_reply(adapter, addr, flags, read_write,
+ command, protocol, data);
+ trace_smbus_result(adapter, addr, flags, read_write,
+ command, protocol, res);
+
+ return res;
+}
+EXPORT_SYMBOL(i2c_smbus_xfer);
+
+/**
+ * i2c_smbus_read_i2c_block_data_or_emulated - read block or emulate
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @length: Size of data block; SMBus allows at most I2C_SMBUS_BLOCK_MAX bytes
+ * @values: Byte array into which data will be read; big enough to hold
+ * the data returned by the slave. SMBus allows at most
+ * I2C_SMBUS_BLOCK_MAX bytes.
+ *
+ * This executes the SMBus "block read" protocol if supported by the adapter.
+ * If block read is not supported, it emulates it using either word or byte
+ * read protocols depending on availability.
+ *
+ * The addresses of the I2C slave device that are accessed with this function
+ * must be mapped to a linear region, so that a block read will have the same
+ * effect as a byte read. Before using this function you must double-check
+ * if the I2C slave does support exchanging a block transfer with a byte
+ * transfer.
+ */
+s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client,
+ u8 command, u8 length, u8 *values)
+{
+ u8 i = 0;
+ int status;
+
+ if (length > I2C_SMBUS_BLOCK_MAX)
+ length = I2C_SMBUS_BLOCK_MAX;
+
+ if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK))
+ return i2c_smbus_read_i2c_block_data(client, command, length, values);
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA))
+ return -EOPNOTSUPP;
+
+ if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)) {
+ while ((i + 2) <= length) {
+ status = i2c_smbus_read_word_data(client, command + i);
+ if (status < 0)
+ return status;
+ values[i] = status & 0xff;
+ values[i + 1] = status >> 8;
+ i += 2;
+ }
+ }
+
+ while (i < length) {
+ status = i2c_smbus_read_byte_data(client, command + i);
+ if (status < 0)
+ return status;
+ values[i] = status;
+ i++;
+ }
+
+ return i;
+}
+EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data_or_emulated);
diff --git a/include/trace/events/i2c.h b/include/trace/events/i2c.h
index 4abb8eab34d319..86a401190df9de 100644
--- a/include/trace/events/i2c.h
+++ b/include/trace/events/i2c.h
@@ -1,4 +1,4 @@
-/* I2C and SMBUS message transfer tracepoints
+/* I2C message transfer tracepoints
*
* Copyright (C) 2013 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
@@ -18,7 +18,7 @@
#include <linux/tracepoint.h>
/*
- * drivers/i2c/i2c-core.c
+ * drivers/i2c/i2c-core-base.c
*/
extern int i2c_transfer_trace_reg(void);
extern void i2c_transfer_trace_unreg(void);
@@ -144,228 +144,6 @@ TRACE_EVENT_FN(i2c_result,
i2c_transfer_trace_reg,
i2c_transfer_trace_unreg);
-/*
- * i2c_smbus_xfer() write data or procedure call request
- */
-TRACE_EVENT_CONDITION(smbus_write,
- TP_PROTO(const struct i2c_adapter *adap,
- u16 addr, unsigned short flags,
- char read_write, u8 command, int protocol,
- const union i2c_smbus_data *data),
- TP_ARGS(adap, addr, flags, read_write, command, protocol, data),
- TP_CONDITION(read_write == I2C_SMBUS_WRITE ||
- protocol == I2C_SMBUS_PROC_CALL ||
- protocol == I2C_SMBUS_BLOCK_PROC_CALL),
- TP_STRUCT__entry(
- __field(int, adapter_nr )
- __field(__u16, addr )
- __field(__u16, flags )
- __field(__u8, command )
- __field(__u8, len )
- __field(__u32, protocol )
- __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ),
- TP_fast_assign(
- __entry->adapter_nr = adap->nr;
- __entry->addr = addr;
- __entry->flags = flags;
- __entry->command = command;
- __entry->protocol = protocol;
-
- switch (protocol) {
- case I2C_SMBUS_BYTE_DATA:
- __entry->len = 1;
- goto copy;
- case I2C_SMBUS_WORD_DATA:
- case I2C_SMBUS_PROC_CALL:
- __entry->len = 2;
- goto copy;
- case I2C_SMBUS_BLOCK_DATA:
- case I2C_SMBUS_BLOCK_PROC_CALL:
- case I2C_SMBUS_I2C_BLOCK_DATA:
- __entry->len = data->block[0] + 1;
- copy:
- memcpy(__entry->buf, data->block, __entry->len);
- break;
- case I2C_SMBUS_QUICK:
- case I2C_SMBUS_BYTE:
- case I2C_SMBUS_I2C_BLOCK_BROKEN:
- default:
- __entry->len = 0;
- }
- ),
- TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]",
- __entry->adapter_nr,
- __entry->addr,
- __entry->flags,
- __entry->command,
- __print_symbolic(__entry->protocol,
- { I2C_SMBUS_QUICK, "QUICK" },
- { I2C_SMBUS_BYTE, "BYTE" },
- { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" },
- { I2C_SMBUS_WORD_DATA, "WORD_DATA" },
- { I2C_SMBUS_PROC_CALL, "PROC_CALL" },
- { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" },
- { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" },
- { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" },
- { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }),
- __entry->len,
- __entry->len, __entry->buf
- ));
-
-/*
- * i2c_smbus_xfer() read data request
- */
-TRACE_EVENT_CONDITION(smbus_read,
- TP_PROTO(const struct i2c_adapter *adap,
- u16 addr, unsigned short flags,
- char read_write, u8 command, int protocol),
- TP_ARGS(adap, addr, flags, read_write, command, protocol),
- TP_CONDITION(!(read_write == I2C_SMBUS_WRITE ||
- protocol == I2C_SMBUS_PROC_CALL ||
- protocol == I2C_SMBUS_BLOCK_PROC_CALL)),
- TP_STRUCT__entry(
- __field(int, adapter_nr )
- __field(__u16, flags )
- __field(__u16, addr )
- __field(__u8, command )
- __field(__u32, protocol )
- __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ),
- TP_fast_assign(
- __entry->adapter_nr = adap->nr;
- __entry->addr = addr;
- __entry->flags = flags;
- __entry->command = command;
- __entry->protocol = protocol;
- ),
- TP_printk("i2c-%d a=%03x f=%04x c=%x %s",
- __entry->adapter_nr,
- __entry->addr,
- __entry->flags,
- __entry->command,
- __print_symbolic(__entry->protocol,
- { I2C_SMBUS_QUICK, "QUICK" },
- { I2C_SMBUS_BYTE, "BYTE" },
- { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" },
- { I2C_SMBUS_WORD_DATA, "WORD_DATA" },
- { I2C_SMBUS_PROC_CALL, "PROC_CALL" },
- { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" },
- { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" },
- { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" },
- { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" })
- ));
-
-/*
- * i2c_smbus_xfer() read data or procedure call reply
- */
-TRACE_EVENT_CONDITION(smbus_reply,
- TP_PROTO(const struct i2c_adapter *adap,
- u16 addr, unsigned short flags,
- char read_write, u8 command, int protocol,
- const union i2c_smbus_data *data),
- TP_ARGS(adap, addr, flags, read_write, command, protocol, data),
- TP_CONDITION(read_write == I2C_SMBUS_READ),
- TP_STRUCT__entry(
- __field(int, adapter_nr )
- __field(__u16, addr )
- __field(__u16, flags )
- __field(__u8, command )
- __field(__u8, len )
- __field(__u32, protocol )
- __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ),
- TP_fast_assign(
- __entry->adapter_nr = adap->nr;
- __entry->addr = addr;
- __entry->flags = flags;
- __entry->command = command;
- __entry->protocol = protocol;
-
- switch (protocol) {
- case I2C_SMBUS_BYTE:
- case I2C_SMBUS_BYTE_DATA:
- __entry->len = 1;
- goto copy;
- case I2C_SMBUS_WORD_DATA:
- case I2C_SMBUS_PROC_CALL:
- __entry->len = 2;
- goto copy;
- case I2C_SMBUS_BLOCK_DATA:
- case I2C_SMBUS_BLOCK_PROC_CALL:
- case I2C_SMBUS_I2C_BLOCK_DATA:
- __entry->len = data->block[0] + 1;
- copy:
- memcpy(__entry->buf, data->block, __entry->len);
- break;
- case I2C_SMBUS_QUICK:
- case I2C_SMBUS_I2C_BLOCK_BROKEN:
- default:
- __entry->len = 0;
- }
- ),
- TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]",
- __entry->adapter_nr,
- __entry->addr,
- __entry->flags,
- __entry->command,
- __print_symbolic(__entry->protocol,
- { I2C_SMBUS_QUICK, "QUICK" },
- { I2C_SMBUS_BYTE, "BYTE" },
- { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" },
- { I2C_SMBUS_WORD_DATA, "WORD_DATA" },
- { I2C_SMBUS_PROC_CALL, "PROC_CALL" },
- { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" },
- { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" },
- { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" },
- { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }),
- __entry->len,
- __entry->len, __entry->buf
- ));
-
-/*
- * i2c_smbus_xfer() result
- */
-TRACE_EVENT(smbus_result,
- TP_PROTO(const struct i2c_adapter *adap,
- u16 addr, unsigned short flags,
- char read_write, u8 command, int protocol,
- int res),
- TP_ARGS(adap, addr, flags, read_write, command, protocol, res),
- TP_STRUCT__entry(
- __field(int, adapter_nr )
- __field(__u16, addr )
- __field(__u16, flags )
- __field(__u8, read_write )
- __field(__u8, command )
- __field(__s16, res )
- __field(__u32, protocol )
- ),
- TP_fast_assign(
- __entry->adapter_nr = adap->nr;
- __entry->addr = addr;
- __entry->flags = flags;
- __entry->read_write = read_write;
- __entry->command = command;
- __entry->protocol = protocol;
- __entry->res = res;
- ),
- TP_printk("i2c-%d a=%03x f=%04x c=%x %s %s res=%d",
- __entry->adapter_nr,
- __entry->addr,
- __entry->flags,
- __entry->command,
- __print_symbolic(__entry->protocol,
- { I2C_SMBUS_QUICK, "QUICK" },
- { I2C_SMBUS_BYTE, "BYTE" },
- { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" },
- { I2C_SMBUS_WORD_DATA, "WORD_DATA" },
- { I2C_SMBUS_PROC_CALL, "PROC_CALL" },
- { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" },
- { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" },
- { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" },
- { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }),
- __entry->read_write == I2C_SMBUS_WRITE ? "wr" : "rd",
- __entry->res
- ));
-
#endif /* _TRACE_I2C_H */
/* This part must be outside protection */
diff --git a/include/trace/events/smbus.h b/include/trace/events/smbus.h
new file mode 100644
index 00000000000000..d2fb6e1d3e10a2
--- /dev/null
+++ b/include/trace/events/smbus.h
@@ -0,0 +1,249 @@
+/* SMBUS message transfer tracepoints
+ *
+ * Copyright (C) 2013 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM smbus
+
+#if !defined(_TRACE_SMBUS_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_SMBUS_H
+
+#include <linux/i2c.h>
+#include <linux/tracepoint.h>
+
+/*
+ * drivers/i2c/i2c-core-smbus.c
+ */
+
+/*
+ * i2c_smbus_xfer() write data or procedure call request
+ */
+TRACE_EVENT_CONDITION(smbus_write,
+ TP_PROTO(const struct i2c_adapter *adap,
+ u16 addr, unsigned short flags,
+ char read_write, u8 command, int protocol,
+ const union i2c_smbus_data *data),
+ TP_ARGS(adap, addr, flags, read_write, command, protocol, data),
+ TP_CONDITION(read_write == I2C_SMBUS_WRITE ||
+ protocol == I2C_SMBUS_PROC_CALL ||
+ protocol == I2C_SMBUS_BLOCK_PROC_CALL),
+ TP_STRUCT__entry(
+ __field(int, adapter_nr )
+ __field(__u16, addr )
+ __field(__u16, flags )
+ __field(__u8, command )
+ __field(__u8, len )
+ __field(__u32, protocol )
+ __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ),
+ TP_fast_assign(
+ __entry->adapter_nr = adap->nr;
+ __entry->addr = addr;
+ __entry->flags = flags;
+ __entry->command = command;
+ __entry->protocol = protocol;
+
+ switch (protocol) {
+ case I2C_SMBUS_BYTE_DATA:
+ __entry->len = 1;
+ goto copy;
+ case I2C_SMBUS_WORD_DATA:
+ case I2C_SMBUS_PROC_CALL:
+ __entry->len = 2;
+ goto copy;
+ case I2C_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ __entry->len = data->block[0] + 1;
+ copy:
+ memcpy(__entry->buf, data->block, __entry->len);
+ break;
+ case I2C_SMBUS_QUICK:
+ case I2C_SMBUS_BYTE:
+ case I2C_SMBUS_I2C_BLOCK_BROKEN:
+ default:
+ __entry->len = 0;
+ }
+ ),
+ TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]",
+ __entry->adapter_nr,
+ __entry->addr,
+ __entry->flags,
+ __entry->command,
+ __print_symbolic(__entry->protocol,
+ { I2C_SMBUS_QUICK, "QUICK" },
+ { I2C_SMBUS_BYTE, "BYTE" },
+ { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" },
+ { I2C_SMBUS_WORD_DATA, "WORD_DATA" },
+ { I2C_SMBUS_PROC_CALL, "PROC_CALL" },
+ { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" },
+ { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" },
+ { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" },
+ { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }),
+ __entry->len,
+ __entry->len, __entry->buf
+ ));
+
+/*
+ * i2c_smbus_xfer() read data request
+ */
+TRACE_EVENT_CONDITION(smbus_read,
+ TP_PROTO(const struct i2c_adapter *adap,
+ u16 addr, unsigned short flags,
+ char read_write, u8 command, int protocol),
+ TP_ARGS(adap, addr, flags, read_write, command, protocol),
+ TP_CONDITION(!(read_write == I2C_SMBUS_WRITE ||
+ protocol == I2C_SMBUS_PROC_CALL ||
+ protocol == I2C_SMBUS_BLOCK_PROC_CALL)),
+ TP_STRUCT__entry(
+ __field(int, adapter_nr )
+ __field(__u16, flags )
+ __field(__u16, addr )
+ __field(__u8, command )
+ __field(__u32, protocol )
+ __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ),
+ TP_fast_assign(
+ __entry->adapter_nr = adap->nr;
+ __entry->addr = addr;
+ __entry->flags = flags;
+ __entry->command = command;
+ __entry->protocol = protocol;
+ ),
+ TP_printk("i2c-%d a=%03x f=%04x c=%x %s",
+ __entry->adapter_nr,
+ __entry->addr,
+ __entry->flags,
+ __entry->command,
+ __print_symbolic(__entry->protocol,
+ { I2C_SMBUS_QUICK, "QUICK" },
+ { I2C_SMBUS_BYTE, "BYTE" },
+ { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" },
+ { I2C_SMBUS_WORD_DATA, "WORD_DATA" },
+ { I2C_SMBUS_PROC_CALL, "PROC_CALL" },
+ { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" },
+ { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" },
+ { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" },
+ { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" })
+ ));
+
+/*
+ * i2c_smbus_xfer() read data or procedure call reply
+ */
+TRACE_EVENT_CONDITION(smbus_reply,
+ TP_PROTO(const struct i2c_adapter *adap,
+ u16 addr, unsigned short flags,
+ char read_write, u8 command, int protocol,
+ const union i2c_smbus_data *data),
+ TP_ARGS(adap, addr, flags, read_write, command, protocol, data),
+ TP_CONDITION(read_write == I2C_SMBUS_READ),
+ TP_STRUCT__entry(
+ __field(int, adapter_nr )
+ __field(__u16, addr )
+ __field(__u16, flags )
+ __field(__u8, command )
+ __field(__u8, len )
+ __field(__u32, protocol )
+ __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ),
+ TP_fast_assign(
+ __entry->adapter_nr = adap->nr;
+ __entry->addr = addr;
+ __entry->flags = flags;
+ __entry->command = command;
+ __entry->protocol = protocol;
+
+ switch (protocol) {
+ case I2C_SMBUS_BYTE:
+ case I2C_SMBUS_BYTE_DATA:
+ __entry->len = 1;
+ goto copy;
+ case I2C_SMBUS_WORD_DATA:
+ case I2C_SMBUS_PROC_CALL:
+ __entry->len = 2;
+ goto copy;
+ case I2C_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ __entry->len = data->block[0] + 1;
+ copy:
+ memcpy(__entry->buf, data->block, __entry->len);
+ break;
+ case I2C_SMBUS_QUICK:
+ case I2C_SMBUS_I2C_BLOCK_BROKEN:
+ default:
+ __entry->len = 0;
+ }
+ ),
+ TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]",
+ __entry->adapter_nr,
+ __entry->addr,
+ __entry->flags,
+ __entry->command,
+ __print_symbolic(__entry->protocol,
+ { I2C_SMBUS_QUICK, "QUICK" },
+ { I2C_SMBUS_BYTE, "BYTE" },
+ { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" },
+ { I2C_SMBUS_WORD_DATA, "WORD_DATA" },
+ { I2C_SMBUS_PROC_CALL, "PROC_CALL" },
+ { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" },
+ { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" },
+ { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" },
+ { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }),
+ __entry->len,
+ __entry->len, __entry->buf
+ ));
+
+/*
+ * i2c_smbus_xfer() result
+ */
+TRACE_EVENT(smbus_result,
+ TP_PROTO(const struct i2c_adapter *adap,
+ u16 addr, unsigned short flags,
+ char read_write, u8 command, int protocol,
+ int res),
+ TP_ARGS(adap, addr, flags, read_write, command, protocol, res),
+ TP_STRUCT__entry(
+ __field(int, adapter_nr )
+ __field(__u16, addr )
+ __field(__u16, flags )
+ __field(__u8, read_write )
+ __field(__u8, command )
+ __field(__s16, res )
+ __field(__u32, protocol )
+ ),
+ TP_fast_assign(
+ __entry->adapter_nr = adap->nr;
+ __entry->addr = addr;
+ __entry->flags = flags;
+ __entry->read_write = read_write;
+ __entry->command = command;
+ __entry->protocol = protocol;
+ __entry->res = res;
+ ),
+ TP_printk("i2c-%d a=%03x f=%04x c=%x %s %s res=%d",
+ __entry->adapter_nr,
+ __entry->addr,
+ __entry->flags,
+ __entry->command,
+ __print_symbolic(__entry->protocol,
+ { I2C_SMBUS_QUICK, "QUICK" },
+ { I2C_SMBUS_BYTE, "BYTE" },
+ { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" },
+ { I2C_SMBUS_WORD_DATA, "WORD_DATA" },
+ { I2C_SMBUS_PROC_CALL, "PROC_CALL" },
+ { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" },
+ { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" },
+ { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" },
+ { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }),
+ __entry->read_write == I2C_SMBUS_WRITE ? "wr" : "rd",
+ __entry->res
+ ));
+
+#endif /* _TRACE_SMBUS_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
--
2.11.0
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH 5/8] i2c: break out ACPI support into seperate file
2017-05-26 8:20 [PATCH 0/8] i2c: refactor core and break out blocks Wolfram Sang
` (3 preceding siblings ...)
2017-05-26 8:20 ` [PATCH 4/8] i2c: break out OF " Wolfram Sang
@ 2017-05-26 8:20 ` Wolfram Sang
2017-05-26 16:15 ` Mika Westerberg
2017-05-26 8:20 ` [PATCH 6/8] docs: i2c: dev-interface: adapt to new filenames of the i2c core Wolfram Sang
` (4 subsequent siblings)
9 siblings, 1 reply; 17+ messages in thread
From: Wolfram Sang @ 2017-05-26 8:20 UTC (permalink / raw)
To: linux-i2c
Cc: Jean Delvare, linux-acpi, Wolfram Sang, Mika Westerberg, linux-kernel
Removes some ifdeffery. Also add the new file to the relevant
MAINTAINERS section.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
MAINTAINERS | 1 +
drivers/i2c/Makefile | 1 +
drivers/i2c/i2c-core-acpi.c | 653 ++++++++++++++++++++++++++++++++++++++++++++
drivers/i2c/i2c-core-base.c | 648 -------------------------------------------
drivers/i2c/i2c-core.h | 15 +
5 files changed, 670 insertions(+), 648 deletions(-)
create mode 100644 drivers/i2c/i2c-core-acpi.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 9e984645c4b08b..3ce38e77f96e6b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6273,6 +6273,7 @@ M: Mika Westerberg <mika.westerberg@linux.intel.com>
L: linux-i2c@vger.kernel.org
L: linux-acpi@vger.kernel.org
S: Maintained
+F: drivers/i2c/i2c-core-acpi.c
I2C-TAOS-EVM DRIVER
M: Jean Delvare <jdelvare@suse.com>
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 189e0e6476f0a6..7bb65a4369e1e1 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -5,6 +5,7 @@
obj-$(CONFIG_I2C_BOARDINFO) += i2c-boardinfo.o
obj-$(CONFIG_I2C) += i2c-core.o
i2c-core-objs := i2c-core-base.o i2c-core-smbus.o
+i2c-core-$(CONFIG_ACPI) += i2c-core-acpi.o
i2c-core-$(CONFIG_I2C_SLAVE) += i2c-core-slave.o
i2c-core-$(CONFIG_OF) += i2c-core-of.o
diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c
new file mode 100644
index 00000000000000..052005579ed626
--- /dev/null
+++ b/drivers/i2c/i2c-core-acpi.c
@@ -0,0 +1,653 @@
+/*
+ * Linux I2C core ACPI support code
+ *
+ * Copyright (C) 2014 Intel Corp, Author: Lan Tianyu <tianyu.lan@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "i2c-core.h"
+
+struct i2c_acpi_handler_data {
+ struct acpi_connection_info info;
+ struct i2c_adapter *adapter;
+};
+
+struct gsb_buffer {
+ u8 status;
+ u8 len;
+ union {
+ u16 wdata;
+ u8 bdata;
+ u8 data[0];
+ };
+} __packed;
+
+struct i2c_acpi_lookup {
+ struct i2c_board_info *info;
+ acpi_handle adapter_handle;
+ acpi_handle device_handle;
+ acpi_handle search_handle;
+ int n;
+ int index;
+ u32 speed;
+ u32 min_speed;
+};
+
+static int i2c_acpi_fill_info(struct acpi_resource *ares, void *data)
+{
+ struct i2c_acpi_lookup *lookup = data;
+ struct i2c_board_info *info = lookup->info;
+ struct acpi_resource_i2c_serialbus *sb;
+ acpi_status status;
+
+ if (info->addr || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
+ return 1;
+
+ sb = &ares->data.i2c_serial_bus;
+ if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C)
+ return 1;
+
+ if (lookup->index != -1 && lookup->n++ != lookup->index)
+ return 1;
+
+ status = acpi_get_handle(lookup->device_handle,
+ sb->resource_source.string_ptr,
+ &lookup->adapter_handle);
+ if (!ACPI_SUCCESS(status))
+ return 1;
+
+ info->addr = sb->slave_address;
+ lookup->speed = sb->connection_speed;
+ if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+ info->flags |= I2C_CLIENT_TEN;
+
+ return 1;
+}
+
+static int i2c_acpi_do_lookup(struct acpi_device *adev,
+ struct i2c_acpi_lookup *lookup)
+{
+ struct i2c_board_info *info = lookup->info;
+ struct list_head resource_list;
+ int ret;
+
+ if (acpi_bus_get_status(adev) || !adev->status.present ||
+ acpi_device_enumerated(adev))
+ return -EINVAL;
+
+ memset(info, 0, sizeof(*info));
+ lookup->device_handle = acpi_device_handle(adev);
+
+ /* Look up for I2cSerialBus resource */
+ INIT_LIST_HEAD(&resource_list);
+ ret = acpi_dev_get_resources(adev, &resource_list,
+ i2c_acpi_fill_info, lookup);
+ acpi_dev_free_resource_list(&resource_list);
+
+ if (ret < 0 || !info->addr)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int i2c_acpi_get_info(struct acpi_device *adev,
+ struct i2c_board_info *info,
+ struct i2c_adapter *adapter,
+ acpi_handle *adapter_handle)
+{
+ struct list_head resource_list;
+ struct resource_entry *entry;
+ struct i2c_acpi_lookup lookup;
+ int ret;
+
+ memset(&lookup, 0, sizeof(lookup));
+ lookup.info = info;
+ lookup.index = -1;
+
+ ret = i2c_acpi_do_lookup(adev, &lookup);
+ if (ret)
+ return ret;
+
+ if (adapter) {
+ /* The adapter must match the one in I2cSerialBus() connector */
+ if (ACPI_HANDLE(&adapter->dev) != lookup.adapter_handle)
+ return -ENODEV;
+ } else {
+ struct acpi_device *adapter_adev;
+
+ /* The adapter must be present */
+ if (acpi_bus_get_device(lookup.adapter_handle, &adapter_adev))
+ return -ENODEV;
+ if (acpi_bus_get_status(adapter_adev) ||
+ !adapter_adev->status.present)
+ return -ENODEV;
+ }
+
+ info->fwnode = acpi_fwnode_handle(adev);
+ if (adapter_handle)
+ *adapter_handle = lookup.adapter_handle;
+
+ /* Then fill IRQ number if any */
+ INIT_LIST_HEAD(&resource_list);
+ ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
+ if (ret < 0)
+ return -EINVAL;
+
+ resource_list_for_each_entry(entry, &resource_list) {
+ if (resource_type(entry->res) == IORESOURCE_IRQ) {
+ info->irq = entry->res->start;
+ break;
+ }
+ }
+
+ acpi_dev_free_resource_list(&resource_list);
+
+ acpi_set_modalias(adev, dev_name(&adev->dev), info->type,
+ sizeof(info->type));
+
+ return 0;
+}
+
+static void i2c_acpi_register_device(struct i2c_adapter *adapter,
+ struct acpi_device *adev,
+ struct i2c_board_info *info)
+{
+ adev->power.flags.ignore_parent = true;
+ acpi_device_set_enumerated(adev);
+
+ if (!i2c_new_device(adapter, info)) {
+ adev->power.flags.ignore_parent = false;
+ dev_err(&adapter->dev,
+ "failed to add I2C device %s from ACPI\n",
+ dev_name(&adev->dev));
+ }
+}
+
+static acpi_status i2c_acpi_add_device(acpi_handle handle, u32 level,
+ void *data, void **return_value)
+{
+ struct i2c_adapter *adapter = data;
+ struct acpi_device *adev;
+ struct i2c_board_info info;
+
+ if (acpi_bus_get_device(handle, &adev))
+ return AE_OK;
+
+ if (i2c_acpi_get_info(adev, &info, adapter, NULL))
+ return AE_OK;
+
+ i2c_acpi_register_device(adapter, adev, &info);
+
+ return AE_OK;
+}
+
+#define I2C_ACPI_MAX_SCAN_DEPTH 32
+
+/**
+ * i2c_acpi_register_devices - enumerate I2C slave devices behind adapter
+ * @adap: pointer to adapter
+ *
+ * Enumerate all I2C slave devices behind this adapter by walking the ACPI
+ * namespace. When a device is found it will be added to the Linux device
+ * model and bound to the corresponding ACPI handle.
+ */
+void i2c_acpi_register_devices(struct i2c_adapter *adap)
+{
+ acpi_status status;
+
+ if (!has_acpi_companion(&adap->dev))
+ return;
+
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+ I2C_ACPI_MAX_SCAN_DEPTH,
+ i2c_acpi_add_device, NULL,
+ adap, NULL);
+ if (ACPI_FAILURE(status))
+ dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
+}
+
+static acpi_status i2c_acpi_lookup_speed(acpi_handle handle, u32 level,
+ void *data, void **return_value)
+{
+ struct i2c_acpi_lookup *lookup = data;
+ struct acpi_device *adev;
+
+ if (acpi_bus_get_device(handle, &adev))
+ return AE_OK;
+
+ if (i2c_acpi_do_lookup(adev, lookup))
+ return AE_OK;
+
+ if (lookup->search_handle != lookup->adapter_handle)
+ return AE_OK;
+
+ if (lookup->speed <= lookup->min_speed)
+ lookup->min_speed = lookup->speed;
+
+ return AE_OK;
+}
+
+/**
+ * i2c_acpi_find_bus_speed - find I2C bus speed from ACPI
+ * @dev: The device owning the bus
+ *
+ * Find the I2C bus speed by walking the ACPI namespace for all I2C slaves
+ * devices connected to this bus and use the speed of slowest device.
+ *
+ * Returns the speed in Hz or zero
+ */
+u32 i2c_acpi_find_bus_speed(struct device *dev)
+{
+ struct i2c_acpi_lookup lookup;
+ struct i2c_board_info dummy;
+ acpi_status status;
+
+ if (!has_acpi_companion(dev))
+ return 0;
+
+ memset(&lookup, 0, sizeof(lookup));
+ lookup.search_handle = ACPI_HANDLE(dev);
+ lookup.min_speed = UINT_MAX;
+ lookup.info = &dummy;
+ lookup.index = -1;
+
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+ I2C_ACPI_MAX_SCAN_DEPTH,
+ i2c_acpi_lookup_speed, NULL,
+ &lookup, NULL);
+
+ if (ACPI_FAILURE(status)) {
+ dev_warn(dev, "unable to find I2C bus speed from ACPI\n");
+ return 0;
+ }
+
+ return lookup.min_speed != UINT_MAX ? lookup.min_speed : 0;
+}
+EXPORT_SYMBOL_GPL(i2c_acpi_find_bus_speed);
+
+static int i2c_acpi_match_adapter(struct device *dev, void *data)
+{
+ struct i2c_adapter *adapter = i2c_verify_adapter(dev);
+
+ if (!adapter)
+ return 0;
+
+ return ACPI_HANDLE(dev) == (acpi_handle)data;
+}
+
+static int i2c_acpi_match_device(struct device *dev, void *data)
+{
+ return ACPI_COMPANION(dev) == data;
+}
+
+static struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)
+{
+ struct device *dev;
+
+ dev = bus_find_device(&i2c_bus_type, NULL, handle,
+ i2c_acpi_match_adapter);
+ return dev ? i2c_verify_adapter(dev) : NULL;
+}
+
+static struct i2c_client *i2c_acpi_find_client_by_adev(struct acpi_device *adev)
+{
+ struct device *dev;
+
+ dev = bus_find_device(&i2c_bus_type, NULL, adev, i2c_acpi_match_device);
+ return dev ? i2c_verify_client(dev) : NULL;
+}
+
+static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value,
+ void *arg)
+{
+ struct acpi_device *adev = arg;
+ struct i2c_board_info info;
+ acpi_handle adapter_handle;
+ struct i2c_adapter *adapter;
+ struct i2c_client *client;
+
+ switch (value) {
+ case ACPI_RECONFIG_DEVICE_ADD:
+ if (i2c_acpi_get_info(adev, &info, NULL, &adapter_handle))
+ break;
+
+ adapter = i2c_acpi_find_adapter_by_handle(adapter_handle);
+ if (!adapter)
+ break;
+
+ i2c_acpi_register_device(adapter, adev, &info);
+ break;
+ case ACPI_RECONFIG_DEVICE_REMOVE:
+ if (!acpi_device_enumerated(adev))
+ break;
+
+ client = i2c_acpi_find_client_by_adev(adev);
+ if (!client)
+ break;
+
+ i2c_unregister_device(client);
+ put_device(&client->dev);
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+struct notifier_block i2c_acpi_notifier = {
+ .notifier_call = i2c_acpi_notify,
+};
+
+/**
+ * i2c_acpi_new_device - Create i2c-client for the Nth I2cSerialBus resource
+ * @dev: Device owning the ACPI resources to get the client from
+ * @index: Index of ACPI resource to get
+ * @info: describes the I2C device; note this is modified (addr gets set)
+ * Context: can sleep
+ *
+ * By default the i2c subsys creates an i2c-client for the first I2cSerialBus
+ * resource of an acpi_device, but some acpi_devices have multiple I2cSerialBus
+ * resources, in that case this function can be used to create an i2c-client
+ * for other I2cSerialBus resources in the Current Resource Settings table.
+ *
+ * Also see i2c_new_device, which this function calls to create the i2c-client.
+ *
+ * Returns a pointer to the new i2c-client, or NULL if the adapter is not found.
+ */
+struct i2c_client *i2c_acpi_new_device(struct device *dev, int index,
+ struct i2c_board_info *info)
+{
+ struct i2c_acpi_lookup lookup;
+ struct i2c_adapter *adapter;
+ struct acpi_device *adev;
+ LIST_HEAD(resource_list);
+ int ret;
+
+ adev = ACPI_COMPANION(dev);
+ if (!adev)
+ return NULL;
+
+ memset(&lookup, 0, sizeof(lookup));
+ lookup.info = info;
+ lookup.device_handle = acpi_device_handle(adev);
+ lookup.index = index;
+
+ ret = acpi_dev_get_resources(adev, &resource_list,
+ i2c_acpi_fill_info, &lookup);
+ acpi_dev_free_resource_list(&resource_list);
+
+ if (ret < 0 || !info->addr)
+ return NULL;
+
+ adapter = i2c_acpi_find_adapter_by_handle(lookup.adapter_handle);
+ if (!adapter)
+ return NULL;
+
+ return i2c_new_device(adapter, info);
+}
+EXPORT_SYMBOL_GPL(i2c_acpi_new_device);
+
+#ifdef CONFIG_ACPI_I2C_OPREGION
+static int acpi_gsb_i2c_read_bytes(struct i2c_client *client,
+ u8 cmd, u8 *data, u8 data_len)
+{
+
+ struct i2c_msg msgs[2];
+ int ret;
+ u8 *buffer;
+
+ buffer = kzalloc(data_len, GFP_KERNEL);
+ if (!buffer)
+ return AE_NO_MEMORY;
+
+ msgs[0].addr = client->addr;
+ msgs[0].flags = client->flags;
+ msgs[0].len = 1;
+ msgs[0].buf = &cmd;
+
+ msgs[1].addr = client->addr;
+ msgs[1].flags = client->flags | I2C_M_RD;
+ msgs[1].len = data_len;
+ msgs[1].buf = buffer;
+
+ ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (ret < 0)
+ dev_err(&client->adapter->dev, "i2c read failed\n");
+ else
+ memcpy(data, buffer, data_len);
+
+ kfree(buffer);
+ return ret;
+}
+
+static int acpi_gsb_i2c_write_bytes(struct i2c_client *client,
+ u8 cmd, u8 *data, u8 data_len)
+{
+
+ struct i2c_msg msgs[1];
+ u8 *buffer;
+ int ret = AE_OK;
+
+ buffer = kzalloc(data_len + 1, GFP_KERNEL);
+ if (!buffer)
+ return AE_NO_MEMORY;
+
+ buffer[0] = cmd;
+ memcpy(buffer + 1, data, data_len);
+
+ msgs[0].addr = client->addr;
+ msgs[0].flags = client->flags;
+ msgs[0].len = data_len + 1;
+ msgs[0].buf = buffer;
+
+ ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (ret < 0)
+ dev_err(&client->adapter->dev, "i2c write failed\n");
+
+ kfree(buffer);
+ return ret;
+}
+
+static acpi_status
+i2c_acpi_space_handler(u32 function, acpi_physical_address command,
+ u32 bits, u64 *value64,
+ void *handler_context, void *region_context)
+{
+ struct gsb_buffer *gsb = (struct gsb_buffer *)value64;
+ struct i2c_acpi_handler_data *data = handler_context;
+ struct acpi_connection_info *info = &data->info;
+ struct acpi_resource_i2c_serialbus *sb;
+ struct i2c_adapter *adapter = data->adapter;
+ struct i2c_client *client;
+ struct acpi_resource *ares;
+ u32 accessor_type = function >> 16;
+ u8 action = function & ACPI_IO_MASK;
+ acpi_status ret;
+ int status;
+
+ ret = acpi_buffer_to_resource(info->connection, info->length, &ares);
+ if (ACPI_FAILURE(ret))
+ return ret;
+
+ client = kzalloc(sizeof(*client), GFP_KERNEL);
+ if (!client) {
+ ret = AE_NO_MEMORY;
+ goto err;
+ }
+
+ if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+ ret = AE_BAD_PARAMETER;
+ goto err;
+ }
+
+ sb = &ares->data.i2c_serial_bus;
+ if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) {
+ ret = AE_BAD_PARAMETER;
+ goto err;
+ }
+
+ client->adapter = adapter;
+ client->addr = sb->slave_address;
+
+ if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+ client->flags |= I2C_CLIENT_TEN;
+
+ switch (accessor_type) {
+ case ACPI_GSB_ACCESS_ATTRIB_SEND_RCV:
+ if (action == ACPI_READ) {
+ status = i2c_smbus_read_byte(client);
+ if (status >= 0) {
+ gsb->bdata = status;
+ status = 0;
+ }
+ } else {
+ status = i2c_smbus_write_byte(client, gsb->bdata);
+ }
+ break;
+
+ case ACPI_GSB_ACCESS_ATTRIB_BYTE:
+ if (action == ACPI_READ) {
+ status = i2c_smbus_read_byte_data(client, command);
+ if (status >= 0) {
+ gsb->bdata = status;
+ status = 0;
+ }
+ } else {
+ status = i2c_smbus_write_byte_data(client, command,
+ gsb->bdata);
+ }
+ break;
+
+ case ACPI_GSB_ACCESS_ATTRIB_WORD:
+ if (action == ACPI_READ) {
+ status = i2c_smbus_read_word_data(client, command);
+ if (status >= 0) {
+ gsb->wdata = status;
+ status = 0;
+ }
+ } else {
+ status = i2c_smbus_write_word_data(client, command,
+ gsb->wdata);
+ }
+ break;
+
+ case ACPI_GSB_ACCESS_ATTRIB_BLOCK:
+ if (action == ACPI_READ) {
+ status = i2c_smbus_read_block_data(client, command,
+ gsb->data);
+ if (status >= 0) {
+ gsb->len = status;
+ status = 0;
+ }
+ } else {
+ status = i2c_smbus_write_block_data(client, command,
+ gsb->len, gsb->data);
+ }
+ break;
+
+ case ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE:
+ if (action == ACPI_READ) {
+ status = acpi_gsb_i2c_read_bytes(client, command,
+ gsb->data, info->access_length);
+ if (status > 0)
+ status = 0;
+ } else {
+ status = acpi_gsb_i2c_write_bytes(client, command,
+ gsb->data, info->access_length);
+ }
+ break;
+
+ default:
+ dev_warn(&adapter->dev, "protocol 0x%02x not supported for client 0x%02x\n",
+ accessor_type, client->addr);
+ ret = AE_BAD_PARAMETER;
+ goto err;
+ }
+
+ gsb->status = status;
+
+ err:
+ kfree(client);
+ ACPI_FREE(ares);
+ return ret;
+}
+
+
+int i2c_acpi_install_space_handler(struct i2c_adapter *adapter)
+{
+ acpi_handle handle;
+ struct i2c_acpi_handler_data *data;
+ acpi_status status;
+
+ if (!adapter->dev.parent)
+ return -ENODEV;
+
+ handle = ACPI_HANDLE(adapter->dev.parent);
+
+ if (!handle)
+ return -ENODEV;
+
+ data = kzalloc(sizeof(struct i2c_acpi_handler_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->adapter = adapter;
+ status = acpi_bus_attach_private_data(handle, (void *)data);
+ if (ACPI_FAILURE(status)) {
+ kfree(data);
+ return -ENOMEM;
+ }
+
+ status = acpi_install_address_space_handler(handle,
+ ACPI_ADR_SPACE_GSBUS,
+ &i2c_acpi_space_handler,
+ NULL,
+ data);
+ if (ACPI_FAILURE(status)) {
+ dev_err(&adapter->dev, "Error installing i2c space handler\n");
+ acpi_bus_detach_private_data(handle);
+ kfree(data);
+ return -ENOMEM;
+ }
+
+ acpi_walk_dep_device_list(handle);
+ return 0;
+}
+
+void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter)
+{
+ acpi_handle handle;
+ struct i2c_acpi_handler_data *data;
+ acpi_status status;
+
+ if (!adapter->dev.parent)
+ return;
+
+ handle = ACPI_HANDLE(adapter->dev.parent);
+
+ if (!handle)
+ return;
+
+ acpi_remove_address_space_handler(handle,
+ ACPI_ADR_SPACE_GSBUS,
+ &i2c_acpi_space_handler);
+
+ status = acpi_bus_get_private_data(handle, (void **)&data);
+ if (ACPI_SUCCESS(status))
+ kfree(data);
+
+ acpi_bus_detach_private_data(handle);
+}
+#endif /* CONFIG_ACPI_I2C_OPREGION */
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 461451da106504..ac7b95e4cda75d 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -16,8 +16,6 @@
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>.
Mux support by Rodolfo Giometti <giometti@enneenne.com> and
Michael Lawnick <michael.lawnick.ext@nsn.com>
- I2C ACPI code Copyright (C) 2014 Intel Corp
- Author: Lan Tianyu <tianyu.lan@intel.com>
*/
#define pr_fmt(fmt) "i2c-core: " fmt
@@ -83,652 +81,6 @@ void i2c_transfer_trace_unreg(void)
static_key_slow_dec(&i2c_trace_msg);
}
-#if defined(CONFIG_ACPI)
-struct i2c_acpi_handler_data {
- struct acpi_connection_info info;
- struct i2c_adapter *adapter;
-};
-
-struct gsb_buffer {
- u8 status;
- u8 len;
- union {
- u16 wdata;
- u8 bdata;
- u8 data[0];
- };
-} __packed;
-
-struct i2c_acpi_lookup {
- struct i2c_board_info *info;
- acpi_handle adapter_handle;
- acpi_handle device_handle;
- acpi_handle search_handle;
- int n;
- int index;
- u32 speed;
- u32 min_speed;
-};
-
-static int i2c_acpi_fill_info(struct acpi_resource *ares, void *data)
-{
- struct i2c_acpi_lookup *lookup = data;
- struct i2c_board_info *info = lookup->info;
- struct acpi_resource_i2c_serialbus *sb;
- acpi_status status;
-
- if (info->addr || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
- return 1;
-
- sb = &ares->data.i2c_serial_bus;
- if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C)
- return 1;
-
- if (lookup->index != -1 && lookup->n++ != lookup->index)
- return 1;
-
- status = acpi_get_handle(lookup->device_handle,
- sb->resource_source.string_ptr,
- &lookup->adapter_handle);
- if (!ACPI_SUCCESS(status))
- return 1;
-
- info->addr = sb->slave_address;
- lookup->speed = sb->connection_speed;
- if (sb->access_mode == ACPI_I2C_10BIT_MODE)
- info->flags |= I2C_CLIENT_TEN;
-
- return 1;
-}
-
-static int i2c_acpi_do_lookup(struct acpi_device *adev,
- struct i2c_acpi_lookup *lookup)
-{
- struct i2c_board_info *info = lookup->info;
- struct list_head resource_list;
- int ret;
-
- if (acpi_bus_get_status(adev) || !adev->status.present ||
- acpi_device_enumerated(adev))
- return -EINVAL;
-
- memset(info, 0, sizeof(*info));
- lookup->device_handle = acpi_device_handle(adev);
-
- /* Look up for I2cSerialBus resource */
- INIT_LIST_HEAD(&resource_list);
- ret = acpi_dev_get_resources(adev, &resource_list,
- i2c_acpi_fill_info, lookup);
- acpi_dev_free_resource_list(&resource_list);
-
- if (ret < 0 || !info->addr)
- return -EINVAL;
-
- return 0;
-}
-
-static int i2c_acpi_get_info(struct acpi_device *adev,
- struct i2c_board_info *info,
- struct i2c_adapter *adapter,
- acpi_handle *adapter_handle)
-{
- struct list_head resource_list;
- struct resource_entry *entry;
- struct i2c_acpi_lookup lookup;
- int ret;
-
- memset(&lookup, 0, sizeof(lookup));
- lookup.info = info;
- lookup.index = -1;
-
- ret = i2c_acpi_do_lookup(adev, &lookup);
- if (ret)
- return ret;
-
- if (adapter) {
- /* The adapter must match the one in I2cSerialBus() connector */
- if (ACPI_HANDLE(&adapter->dev) != lookup.adapter_handle)
- return -ENODEV;
- } else {
- struct acpi_device *adapter_adev;
-
- /* The adapter must be present */
- if (acpi_bus_get_device(lookup.adapter_handle, &adapter_adev))
- return -ENODEV;
- if (acpi_bus_get_status(adapter_adev) ||
- !adapter_adev->status.present)
- return -ENODEV;
- }
-
- info->fwnode = acpi_fwnode_handle(adev);
- if (adapter_handle)
- *adapter_handle = lookup.adapter_handle;
-
- /* Then fill IRQ number if any */
- INIT_LIST_HEAD(&resource_list);
- ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
- if (ret < 0)
- return -EINVAL;
-
- resource_list_for_each_entry(entry, &resource_list) {
- if (resource_type(entry->res) == IORESOURCE_IRQ) {
- info->irq = entry->res->start;
- break;
- }
- }
-
- acpi_dev_free_resource_list(&resource_list);
-
- acpi_set_modalias(adev, dev_name(&adev->dev), info->type,
- sizeof(info->type));
-
- return 0;
-}
-
-static void i2c_acpi_register_device(struct i2c_adapter *adapter,
- struct acpi_device *adev,
- struct i2c_board_info *info)
-{
- adev->power.flags.ignore_parent = true;
- acpi_device_set_enumerated(adev);
-
- if (!i2c_new_device(adapter, info)) {
- adev->power.flags.ignore_parent = false;
- dev_err(&adapter->dev,
- "failed to add I2C device %s from ACPI\n",
- dev_name(&adev->dev));
- }
-}
-
-static acpi_status i2c_acpi_add_device(acpi_handle handle, u32 level,
- void *data, void **return_value)
-{
- struct i2c_adapter *adapter = data;
- struct acpi_device *adev;
- struct i2c_board_info info;
-
- if (acpi_bus_get_device(handle, &adev))
- return AE_OK;
-
- if (i2c_acpi_get_info(adev, &info, adapter, NULL))
- return AE_OK;
-
- i2c_acpi_register_device(adapter, adev, &info);
-
- return AE_OK;
-}
-
-#define I2C_ACPI_MAX_SCAN_DEPTH 32
-
-/**
- * i2c_acpi_register_devices - enumerate I2C slave devices behind adapter
- * @adap: pointer to adapter
- *
- * Enumerate all I2C slave devices behind this adapter by walking the ACPI
- * namespace. When a device is found it will be added to the Linux device
- * model and bound to the corresponding ACPI handle.
- */
-static void i2c_acpi_register_devices(struct i2c_adapter *adap)
-{
- acpi_status status;
-
- if (!has_acpi_companion(&adap->dev))
- return;
-
- status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
- I2C_ACPI_MAX_SCAN_DEPTH,
- i2c_acpi_add_device, NULL,
- adap, NULL);
- if (ACPI_FAILURE(status))
- dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
-}
-
-static acpi_status i2c_acpi_lookup_speed(acpi_handle handle, u32 level,
- void *data, void **return_value)
-{
- struct i2c_acpi_lookup *lookup = data;
- struct acpi_device *adev;
-
- if (acpi_bus_get_device(handle, &adev))
- return AE_OK;
-
- if (i2c_acpi_do_lookup(adev, lookup))
- return AE_OK;
-
- if (lookup->search_handle != lookup->adapter_handle)
- return AE_OK;
-
- if (lookup->speed <= lookup->min_speed)
- lookup->min_speed = lookup->speed;
-
- return AE_OK;
-}
-
-/**
- * i2c_acpi_find_bus_speed - find I2C bus speed from ACPI
- * @dev: The device owning the bus
- *
- * Find the I2C bus speed by walking the ACPI namespace for all I2C slaves
- * devices connected to this bus and use the speed of slowest device.
- *
- * Returns the speed in Hz or zero
- */
-u32 i2c_acpi_find_bus_speed(struct device *dev)
-{
- struct i2c_acpi_lookup lookup;
- struct i2c_board_info dummy;
- acpi_status status;
-
- if (!has_acpi_companion(dev))
- return 0;
-
- memset(&lookup, 0, sizeof(lookup));
- lookup.search_handle = ACPI_HANDLE(dev);
- lookup.min_speed = UINT_MAX;
- lookup.info = &dummy;
- lookup.index = -1;
-
- status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
- I2C_ACPI_MAX_SCAN_DEPTH,
- i2c_acpi_lookup_speed, NULL,
- &lookup, NULL);
-
- if (ACPI_FAILURE(status)) {
- dev_warn(dev, "unable to find I2C bus speed from ACPI\n");
- return 0;
- }
-
- return lookup.min_speed != UINT_MAX ? lookup.min_speed : 0;
-}
-EXPORT_SYMBOL_GPL(i2c_acpi_find_bus_speed);
-
-static int i2c_acpi_match_adapter(struct device *dev, void *data)
-{
- struct i2c_adapter *adapter = i2c_verify_adapter(dev);
-
- if (!adapter)
- return 0;
-
- return ACPI_HANDLE(dev) == (acpi_handle)data;
-}
-
-static int i2c_acpi_match_device(struct device *dev, void *data)
-{
- return ACPI_COMPANION(dev) == data;
-}
-
-static struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)
-{
- struct device *dev;
-
- dev = bus_find_device(&i2c_bus_type, NULL, handle,
- i2c_acpi_match_adapter);
- return dev ? i2c_verify_adapter(dev) : NULL;
-}
-
-static struct i2c_client *i2c_acpi_find_client_by_adev(struct acpi_device *adev)
-{
- struct device *dev;
-
- dev = bus_find_device(&i2c_bus_type, NULL, adev, i2c_acpi_match_device);
- return dev ? i2c_verify_client(dev) : NULL;
-}
-
-static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value,
- void *arg)
-{
- struct acpi_device *adev = arg;
- struct i2c_board_info info;
- acpi_handle adapter_handle;
- struct i2c_adapter *adapter;
- struct i2c_client *client;
-
- switch (value) {
- case ACPI_RECONFIG_DEVICE_ADD:
- if (i2c_acpi_get_info(adev, &info, NULL, &adapter_handle))
- break;
-
- adapter = i2c_acpi_find_adapter_by_handle(adapter_handle);
- if (!adapter)
- break;
-
- i2c_acpi_register_device(adapter, adev, &info);
- break;
- case ACPI_RECONFIG_DEVICE_REMOVE:
- if (!acpi_device_enumerated(adev))
- break;
-
- client = i2c_acpi_find_client_by_adev(adev);
- if (!client)
- break;
-
- i2c_unregister_device(client);
- put_device(&client->dev);
- break;
- }
-
- return NOTIFY_OK;
-}
-
-static struct notifier_block i2c_acpi_notifier = {
- .notifier_call = i2c_acpi_notify,
-};
-
-/**
- * i2c_acpi_new_device - Create i2c-client for the Nth I2cSerialBus resource
- * @dev: Device owning the ACPI resources to get the client from
- * @index: Index of ACPI resource to get
- * @info: describes the I2C device; note this is modified (addr gets set)
- * Context: can sleep
- *
- * By default the i2c subsys creates an i2c-client for the first I2cSerialBus
- * resource of an acpi_device, but some acpi_devices have multiple I2cSerialBus
- * resources, in that case this function can be used to create an i2c-client
- * for other I2cSerialBus resources in the Current Resource Settings table.
- *
- * Also see i2c_new_device, which this function calls to create the i2c-client.
- *
- * Returns a pointer to the new i2c-client, or NULL if the adapter is not found.
- */
-struct i2c_client *i2c_acpi_new_device(struct device *dev, int index,
- struct i2c_board_info *info)
-{
- struct i2c_acpi_lookup lookup;
- struct i2c_adapter *adapter;
- struct acpi_device *adev;
- LIST_HEAD(resource_list);
- int ret;
-
- adev = ACPI_COMPANION(dev);
- if (!adev)
- return NULL;
-
- memset(&lookup, 0, sizeof(lookup));
- lookup.info = info;
- lookup.device_handle = acpi_device_handle(adev);
- lookup.index = index;
-
- ret = acpi_dev_get_resources(adev, &resource_list,
- i2c_acpi_fill_info, &lookup);
- acpi_dev_free_resource_list(&resource_list);
-
- if (ret < 0 || !info->addr)
- return NULL;
-
- adapter = i2c_acpi_find_adapter_by_handle(lookup.adapter_handle);
- if (!adapter)
- return NULL;
-
- return i2c_new_device(adapter, info);
-}
-EXPORT_SYMBOL_GPL(i2c_acpi_new_device);
-#else /* CONFIG_ACPI */
-static inline void i2c_acpi_register_devices(struct i2c_adapter *adap) { }
-extern struct notifier_block i2c_acpi_notifier;
-#endif /* CONFIG_ACPI */
-
-#ifdef CONFIG_ACPI_I2C_OPREGION
-static int acpi_gsb_i2c_read_bytes(struct i2c_client *client,
- u8 cmd, u8 *data, u8 data_len)
-{
-
- struct i2c_msg msgs[2];
- int ret;
- u8 *buffer;
-
- buffer = kzalloc(data_len, GFP_KERNEL);
- if (!buffer)
- return AE_NO_MEMORY;
-
- msgs[0].addr = client->addr;
- msgs[0].flags = client->flags;
- msgs[0].len = 1;
- msgs[0].buf = &cmd;
-
- msgs[1].addr = client->addr;
- msgs[1].flags = client->flags | I2C_M_RD;
- msgs[1].len = data_len;
- msgs[1].buf = buffer;
-
- ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
- if (ret < 0)
- dev_err(&client->adapter->dev, "i2c read failed\n");
- else
- memcpy(data, buffer, data_len);
-
- kfree(buffer);
- return ret;
-}
-
-static int acpi_gsb_i2c_write_bytes(struct i2c_client *client,
- u8 cmd, u8 *data, u8 data_len)
-{
-
- struct i2c_msg msgs[1];
- u8 *buffer;
- int ret = AE_OK;
-
- buffer = kzalloc(data_len + 1, GFP_KERNEL);
- if (!buffer)
- return AE_NO_MEMORY;
-
- buffer[0] = cmd;
- memcpy(buffer + 1, data, data_len);
-
- msgs[0].addr = client->addr;
- msgs[0].flags = client->flags;
- msgs[0].len = data_len + 1;
- msgs[0].buf = buffer;
-
- ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
- if (ret < 0)
- dev_err(&client->adapter->dev, "i2c write failed\n");
-
- kfree(buffer);
- return ret;
-}
-
-static acpi_status
-i2c_acpi_space_handler(u32 function, acpi_physical_address command,
- u32 bits, u64 *value64,
- void *handler_context, void *region_context)
-{
- struct gsb_buffer *gsb = (struct gsb_buffer *)value64;
- struct i2c_acpi_handler_data *data = handler_context;
- struct acpi_connection_info *info = &data->info;
- struct acpi_resource_i2c_serialbus *sb;
- struct i2c_adapter *adapter = data->adapter;
- struct i2c_client *client;
- struct acpi_resource *ares;
- u32 accessor_type = function >> 16;
- u8 action = function & ACPI_IO_MASK;
- acpi_status ret;
- int status;
-
- ret = acpi_buffer_to_resource(info->connection, info->length, &ares);
- if (ACPI_FAILURE(ret))
- return ret;
-
- client = kzalloc(sizeof(*client), GFP_KERNEL);
- if (!client) {
- ret = AE_NO_MEMORY;
- goto err;
- }
-
- if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) {
- ret = AE_BAD_PARAMETER;
- goto err;
- }
-
- sb = &ares->data.i2c_serial_bus;
- if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) {
- ret = AE_BAD_PARAMETER;
- goto err;
- }
-
- client->adapter = adapter;
- client->addr = sb->slave_address;
-
- if (sb->access_mode == ACPI_I2C_10BIT_MODE)
- client->flags |= I2C_CLIENT_TEN;
-
- switch (accessor_type) {
- case ACPI_GSB_ACCESS_ATTRIB_SEND_RCV:
- if (action == ACPI_READ) {
- status = i2c_smbus_read_byte(client);
- if (status >= 0) {
- gsb->bdata = status;
- status = 0;
- }
- } else {
- status = i2c_smbus_write_byte(client, gsb->bdata);
- }
- break;
-
- case ACPI_GSB_ACCESS_ATTRIB_BYTE:
- if (action == ACPI_READ) {
- status = i2c_smbus_read_byte_data(client, command);
- if (status >= 0) {
- gsb->bdata = status;
- status = 0;
- }
- } else {
- status = i2c_smbus_write_byte_data(client, command,
- gsb->bdata);
- }
- break;
-
- case ACPI_GSB_ACCESS_ATTRIB_WORD:
- if (action == ACPI_READ) {
- status = i2c_smbus_read_word_data(client, command);
- if (status >= 0) {
- gsb->wdata = status;
- status = 0;
- }
- } else {
- status = i2c_smbus_write_word_data(client, command,
- gsb->wdata);
- }
- break;
-
- case ACPI_GSB_ACCESS_ATTRIB_BLOCK:
- if (action == ACPI_READ) {
- status = i2c_smbus_read_block_data(client, command,
- gsb->data);
- if (status >= 0) {
- gsb->len = status;
- status = 0;
- }
- } else {
- status = i2c_smbus_write_block_data(client, command,
- gsb->len, gsb->data);
- }
- break;
-
- case ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE:
- if (action == ACPI_READ) {
- status = acpi_gsb_i2c_read_bytes(client, command,
- gsb->data, info->access_length);
- if (status > 0)
- status = 0;
- } else {
- status = acpi_gsb_i2c_write_bytes(client, command,
- gsb->data, info->access_length);
- }
- break;
-
- default:
- dev_warn(&adapter->dev, "protocol 0x%02x not supported for client 0x%02x\n",
- accessor_type, client->addr);
- ret = AE_BAD_PARAMETER;
- goto err;
- }
-
- gsb->status = status;
-
- err:
- kfree(client);
- ACPI_FREE(ares);
- return ret;
-}
-
-
-static int i2c_acpi_install_space_handler(struct i2c_adapter *adapter)
-{
- acpi_handle handle;
- struct i2c_acpi_handler_data *data;
- acpi_status status;
-
- if (!adapter->dev.parent)
- return -ENODEV;
-
- handle = ACPI_HANDLE(adapter->dev.parent);
-
- if (!handle)
- return -ENODEV;
-
- data = kzalloc(sizeof(struct i2c_acpi_handler_data),
- GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- data->adapter = adapter;
- status = acpi_bus_attach_private_data(handle, (void *)data);
- if (ACPI_FAILURE(status)) {
- kfree(data);
- return -ENOMEM;
- }
-
- status = acpi_install_address_space_handler(handle,
- ACPI_ADR_SPACE_GSBUS,
- &i2c_acpi_space_handler,
- NULL,
- data);
- if (ACPI_FAILURE(status)) {
- dev_err(&adapter->dev, "Error installing i2c space handler\n");
- acpi_bus_detach_private_data(handle);
- kfree(data);
- return -ENOMEM;
- }
-
- acpi_walk_dep_device_list(handle);
- return 0;
-}
-
-static void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter)
-{
- acpi_handle handle;
- struct i2c_acpi_handler_data *data;
- acpi_status status;
-
- if (!adapter->dev.parent)
- return;
-
- handle = ACPI_HANDLE(adapter->dev.parent);
-
- if (!handle)
- return;
-
- acpi_remove_address_space_handler(handle,
- ACPI_ADR_SPACE_GSBUS,
- &i2c_acpi_space_handler);
-
- status = acpi_bus_get_private_data(handle, (void **)&data);
- if (ACPI_SUCCESS(status))
- kfree(data);
-
- acpi_bus_detach_private_data(handle);
-}
-#else /* CONFIG_ACPI_I2C_OPREGION */
-static inline void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter)
-{ }
-
-static inline int i2c_acpi_install_space_handler(struct i2c_adapter *adapter)
-{ return 0; }
-#endif /* CONFIG_ACPI_I2C_OPREGION */
-
-/* ------------------------------------------------------------------------- */
-
const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,
const struct i2c_client *client)
{
diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h
index 22151c88e88599..3b63f5e5b89cbd 100644
--- a/drivers/i2c/i2c-core.h
+++ b/drivers/i2c/i2c-core.h
@@ -30,6 +30,21 @@ extern int __i2c_first_dynamic_bus_num;
int i2c_check_addr_validity(unsigned addr, unsigned short flags);
int i2c_check_7bit_addr_validity_strict(unsigned short addr);
+#ifdef CONFIG_ACPI
+void i2c_acpi_register_devices(struct i2c_adapter *adap);
+#else /* CONFIG_ACPI */
+static inline void i2c_acpi_register_devices(struct i2c_adapter *adap) { }
+#endif /* CONFIG_ACPI */
+extern struct notifier_block i2c_acpi_notifier;
+
+#ifdef CONFIG_ACPI_I2C_OPREGION
+int i2c_acpi_install_space_handler(struct i2c_adapter *adapter);
+void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter);
+#else /* CONFIG_ACPI_I2C_OPREGION */
+static inline int i2c_acpi_install_space_handler(struct i2c_adapter *adapter) { return 0; }
+static inline void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter) { }
+#endif /* CONFIG_ACPI_I2C_OPREGION */
+
#ifdef CONFIG_OF
void of_i2c_register_devices(struct i2c_adapter *adap);
#else
--
2.11.0
^ permalink raw reply related [flat|nested] 17+ messages in thread