* [PATCH] usb: dwc3: keystone: drop dma_mask configuration
@ 2016-04-04 11:33 Grygorii Strashko
2016-04-04 11:45 ` Felipe Balbi
0 siblings, 1 reply; 4+ messages in thread
From: Grygorii Strashko @ 2016-04-04 11:33 UTC (permalink / raw)
To: Greg Kroah-Hartman, Felipe Balbi, linux-usb
Cc: Roger Quadros, linux-kernel, linux-arm-kernel, nsekhar,
Grygorii Strashko, Murali Karicheri
The Keystone 2 supports DT-boot only, as result dma_mask will be
always configured properly from DT -
of_platform_device_create_pdata()->of_dma_configure(). More over,
dwc3-keystone.c can be built as module and in this case it's unsafe to
assign local variable as dma_mask.
Hence, remove dma_mask configuration code.
Cc: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
drivers/usb/dwc3/dwc3-keystone.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-keystone.c b/drivers/usb/dwc3/dwc3-keystone.c
index 2be268d..7266470 100644
--- a/drivers/usb/dwc3/dwc3-keystone.c
+++ b/drivers/usb/dwc3/dwc3-keystone.c
@@ -39,8 +39,6 @@
#define USBSS_IRQ_COREIRQ_EN BIT(0)
#define USBSS_IRQ_COREIRQ_CLR BIT(0)
-static u64 kdwc3_dma_mask;
-
struct dwc3_keystone {
struct device *dev;
struct clk *clk;
@@ -108,9 +106,6 @@ static int kdwc3_probe(struct platform_device *pdev)
if (IS_ERR(kdwc->usbss))
return PTR_ERR(kdwc->usbss);
- kdwc3_dma_mask = dma_get_mask(dev);
- dev->dma_mask = &kdwc3_dma_mask;
-
kdwc->clk = devm_clk_get(kdwc->dev, "usb");
error = clk_prepare_enable(kdwc->clk);
--
2.8.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] usb: dwc3: keystone: drop dma_mask configuration
2016-04-04 11:33 [PATCH] usb: dwc3: keystone: drop dma_mask configuration Grygorii Strashko
@ 2016-04-04 11:45 ` Felipe Balbi
2016-04-04 13:41 ` Grygorii Strashko
0 siblings, 1 reply; 4+ messages in thread
From: Felipe Balbi @ 2016-04-04 11:45 UTC (permalink / raw)
To: Grygorii Strashko, Greg Kroah-Hartman, linux-usb
Cc: Roger Quadros, linux-kernel, linux-arm-kernel, nsekhar,
Grygorii Strashko, Murali Karicheri
[-- Attachment #1: Type: text/plain, Size: 672 bytes --]
Hi,
Grygorii Strashko <grygorii.strashko@ti.com> writes:
> The Keystone 2 supports DT-boot only, as result dma_mask will be
> always configured properly from DT -
> of_platform_device_create_pdata()->of_dma_configure(). More over,
> dwc3-keystone.c can be built as module and in this case it's unsafe to
> assign local variable as dma_mask.
>
> Hence, remove dma_mask configuration code.
>
> Cc: Murali Karicheri <m-karicheri2@ti.com>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
with these two patches from you, does USB Peripheral work on k2 devices ?
I'll drop my k2 changes from my series which I sent on saturday.
--
balbi
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 818 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] usb: dwc3: keystone: drop dma_mask configuration
2016-04-04 11:45 ` Felipe Balbi
@ 2016-04-04 13:41 ` Grygorii Strashko
2016-04-05 5:19 ` Felipe Balbi
0 siblings, 1 reply; 4+ messages in thread
From: Grygorii Strashko @ 2016-04-04 13:41 UTC (permalink / raw)
To: Felipe Balbi, Greg Kroah-Hartman, linux-usb
Cc: Roger Quadros, linux-kernel, linux-arm-kernel, nsekhar, Murali Karicheri
On 04/04/2016 02:45 PM, Felipe Balbi wrote:
>
> Hi,
>
> Grygorii Strashko <grygorii.strashko@ti.com> writes:
>> The Keystone 2 supports DT-boot only, as result dma_mask will be
>> always configured properly from DT -
>> of_platform_device_create_pdata()->of_dma_configure(). More over,
>> dwc3-keystone.c can be built as module and in this case it's unsafe to
>> assign local variable as dma_mask.
>>
>> Hence, remove dma_mask configuration code.
>>
>> Cc: Murali Karicheri <m-karicheri2@ti.com>
>> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
>
> with these two patches from you, does USB Peripheral work on k2 devices ?
I've tried CONFIG_USB_DWC3_GADGET=y + g_zero and k2e was detected
as gzero dev from Host PC
>
> I'll drop my k2 changes from my series which I sent on saturday.
>
Yes, please.
--
regards,
-grygorii
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] usb: dwc3: keystone: drop dma_mask configuration
2016-04-04 13:41 ` Grygorii Strashko
@ 2016-04-05 5:19 ` Felipe Balbi
0 siblings, 0 replies; 4+ messages in thread
From: Felipe Balbi @ 2016-04-05 5:19 UTC (permalink / raw)
To: Grygorii Strashko, Greg Kroah-Hartman, linux-usb
Cc: Roger Quadros, linux-kernel, linux-arm-kernel, nsekhar, Murali Karicheri
[-- Attachment #1: Type: text/plain, Size: 1004 bytes --]
Hi,
Grygorii Strashko <grygorii.strashko@ti.com> writes:
> On 04/04/2016 02:45 PM, Felipe Balbi wrote:
>>
>> Hi,
>>
>> Grygorii Strashko <grygorii.strashko@ti.com> writes:
>>> The Keystone 2 supports DT-boot only, as result dma_mask will be
>>> always configured properly from DT -
>>> of_platform_device_create_pdata()->of_dma_configure(). More over,
>>> dwc3-keystone.c can be built as module and in this case it's unsafe to
>>> assign local variable as dma_mask.
>>>
>>> Hence, remove dma_mask configuration code.
>>>
>>> Cc: Murali Karicheri <m-karicheri2@ti.com>
>>> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
>>
>> with these two patches from you, does USB Peripheral work on k2 devices ?
>
> I've tried CONFIG_USB_DWC3_GADGET=y + g_zero and k2e was detected
> as gzero dev from Host PC
>
>>
>> I'll drop my k2 changes from my series which I sent on saturday.
>>
>
> Yes, please.
can you test a similar patch to dwc3-omap.c, then ?
--
balbi
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 818 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-04-05 5:21 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-04 11:33 [PATCH] usb: dwc3: keystone: drop dma_mask configuration Grygorii Strashko
2016-04-04 11:45 ` Felipe Balbi
2016-04-04 13:41 ` Grygorii Strashko
2016-04-05 5:19 ` Felipe Balbi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).