test9 - USB and fat32 not working

test9 - USB and fat32 not working

[Paulo Moura Guedes]

I have an i686 with RH9 and i installed Red Hat unofficial rpm's 
(kernel-2.6.0-0.test9.1.70.i686.rpm , etc..)

Everything is working fine expect for this boot messages (I'll try to 
remember):

USB not working - missing 
	usb_uhci
	mousedev
	keybdev

Also i can't mount my fat32 partitions. (I have no problem with RH9 kernel, 
fstab is ok)

Finally,  mouse movement is way too accelerated.

-- 
KMail - The supreme eMail client

Re: test9 - USB and fat32 not working

[OGAWA Hirofumi]

Paulo Moura Guedes <pmg@netcabo.pt> writes:

> Also i can't mount my fat32 partitions. (I have no problem with RH9 kernel, 
> fstab is ok)

Please send output of dmesg and fstab.
-- 
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>

Re: test9 - USB and fat32 not working

[Andries Brouwer]

On Thu, Nov 06, 2003 at 09:10:45PM +0000, Paulo Moura Guedes wrote:

> FAT: Unrecognized mount option "owner=mojo" or missing value

>From mount(8):

       (iii) Normally, only the superuser can mount file systems.
       However, when fstab  contains the "user" option on a line,
       anybody can mount the corresponding system.

       Thus, given a line
              /dev/cdrom  /cd  iso9660  ro,user,noauto,unhide
       any user can mount the iso9660 file system  found  on  his
       CDROM using the command
              mount /dev/cdrom
       or
              mount /cd
       ...                 The owner option  is  similar  to  the
       user  option,  with  the restriction that the user must be
       the owner of the special file. This may be useful e.g. for
       /dev/fd  if a login script makes the console user owner of
       this device.

That is: the syntax is "owner", not "owner=...".
Also, this is an option handled by mount, so kernel version
should play no role.

However, 2.6 does more strict option checking, and complains
about unknown options, while 2.4 in many places just ignores them.

Re: test9 - USB and fat32 not working

[Paulo Moura Guedes]

[-- Attachment #1: Type: text/plain, Size: 670 bytes --]

( I have an i686 with RH9 and i installed Red Hat unofficial rpm's 
 (kernel-2.6.0-0.test9.1.70.i686.rpm , etc..)

Everything is working fine expect for this boot messages (I'll try to 
emember):
 
USB not working - missing 
         usb_uhci
         mousedev
         keybdev

Can't mount my fat32 partitions. (I have no problem with RH9 kernel, 
fstab is ok)

Mouse movement is way too accelerated.
)

> Please send output of dmesg and fstab.

I noticed that this only happen under X. On text mode movement are fine.

My cdroms disapeared too.

As you said i send you the output of dmesg and fstab with kernel 2.4 and 2.6.

Paulo
-- 
KMail - The supreme eMail client

[-- Attachment #2: boot.messages --]
[-- Type: text/plain, Size: 8254 bytes --]

Linux version 2.6.0-0.test9.1.70 (bhcompile@porky.devel.redhat.com) (gcc version 3.3.2 20031022 (Red Hat Linux 3.3.2-1)) #1 Wed Nov 5 10:25:44 EST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000027ff0000 (usable)
 BIOS-e820: 0000000027ff0000 - 0000000027ff3000 (ACPI NVS)
 BIOS-e820: 0000000027ff3000 - 0000000028000000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
639MB LOWMEM available.
On node 0 totalpages: 163824
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 159728 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI disabled because your bios is from 2000 and too old
You can enable it with acpi=force
ACPI: RSDP (v000 VIA694                                    ) @ 0x000f7050
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x27ff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x27ff3040
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Building zonelist for node : 0
Kernel command line: ro root=LABEL=/1 hdc=ide-scsi hdd=ide-scsi
ide_setup: hdc=ide-scsi
ide_setup: hdd=ide-scsi
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 811.202 MHz processor.
Console: colour VGA+ 80x25
Memory: 645292k/655296k available (1388k kernel code, 9244k reserved, 717k data, 136k init, 0k highmem)
Calibrating delay loop... 1593.34 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
Failure registering capabilities with the kernel
selinux_register_security:  Registering secondary module capability
Capability LSM initialized
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 164k freed
CPU:     After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU:     After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU:     After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Duron(tm) Processor stepping 01
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20031002
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
ACPI: ACPI tables contain no PCI IRQ routing entries
PCI: Invalid ACPI-PCI IRQ routing table
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09
PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Initializing Cryptographic API
Applying VIA southbridge workaround.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
pty: 2048 Unix98 ptys configured
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: Maximum main memory to use for agp memory: 564M
agpgart: AGP aperture is 64M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
    ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST340014A, ATA DISK drive
hdb: ST320413A, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: LG CD-ROM CRD-8522B, ATAPI CD/DVD-ROM drive
hdd: AOPEN CD-RW CRW4850 1.01 20020904, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
 hda: hda1 hda2 hda3
hdb: max request size: 128KiB
hdb: 39102336 sectors (20020 MB) w/512KiB Cache, CHS=38792/16/63, UDMA(100)
 hdb: hdb1
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: GenPS/2 Genius Wheel Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 136k freed
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
EXT3 FS on hda1, internal journal
Adding 1020116k swap on /dev/hda2.  Priority:-1 extents:1
FAT: Unrecognized mount option "owner=mojo" or missing value
FAT: Unrecognized mount option "owner=mojo" or missing value
SCSI subsystem initialized
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: LG        Model: CD-ROM CRD-8522B  Rev: 1.00
  Type:   CD-ROM                             ANSI SCSI revision: 02
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: AOPEN     Model: CD-RW CRW4850     Rev: 1.01
  Type:   CD-ROM                             ANSI SCSI revision: 02
kudzu: numerical sysctl 1 23 is obsolete.
parport0: PC-style at 0x378 [PCSPP,EPP]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport_pc: Via 686A parallel port: io=0x378
inserting floppy driver for 2.6.0-0.test9.1.70
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ip_tables: (C) 2000-2002 Netfilter core team
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 11 for device 0000:00:0b.0
PCI: Sharing IRQ 11 with 0000:00:07.2
PCI: Sharing IRQ 11 with 0000:00:07.3
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 at 0xe8930000, 00:50:fc:a2:ee:e5, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
lp0: using parport0 (polling).
lp0: console ready
Via 686a/8233/8235 audio driver 1.9.1-ac3-2.5
PCI: Found IRQ 5 for device 0000:00:07.5
PCI: Setting latency timer of device 0000:00:07.5 to 64
ac97_codec: AC97 Audio codec, id: ICE17 (ICE1232)
via82cxxx: board #1 at 0xDC00, IRQ 5
via_audio: ignoring drain playback error -11
via_audio: ignoring drain playback error -11
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02da8e0(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
eth0: no IPv6 routers present
via_audio: ignoring drain playback error -11

[-- Attachment #3: fstab_2.4 --]
[-- Type: text/plain, Size: 844 bytes --]

LABEL=/1                /                       ext3    defaults        1 1
none                    /dev/pts                devpts  gid=5,mode=620  0 0
none                    /proc                   proc    defaults        0 0
none                    /dev/shm                tmpfs   defaults        0 0
/dev/hda2               swap                    swap    defaults        0 0
/dev/hda3               /win                    vfat    uid=mojo,gid=mojo,owner=mojo,mode=0775        0 0
/dev/hdb1               /slave                  vfat    uid=mojo,gid=mojo,owner=mojo,mode=0775        0 0
/dev/fd0                /mnt/floppy             auto    noauto,owner,kudzu 0 0
/dev/cdrom              /mnt/cdrom              udf,iso9660 noauto,owner,kudzu,ro 0 0
/dev/cdrom1             /mnt/cdrom1             udf,iso9660 noauto,owner,kudzu,ro 0 0


[-- Attachment #4: fstab_2.6 --]
[-- Type: text/plain, Size: 638 bytes --]

LABEL=/1                /                       ext3    defaults        1 1
none                    /dev/pts                devpts  gid=5,mode=620  0 0
none                    /proc                   proc    defaults        0 0
none                    /dev/shm                tmpfs   defaults        0 0
/dev/hda2               swap                    swap    defaults        0 0
/dev/hda3		/win			vfat	uid=mojo,gid=mojo,owner=mojo,mode=0775        0 0
/dev/hdb1               /slave                  vfat    uid=mojo,gid=mojo,owner=mojo,mode=0775        0 0
/dev/fd0                /mnt/floppy             auto    noauto,owner,kudzu 0 0