* [PATCH] drivers/pcmcia: NO_IRQ removal for electra_cf.c
@ 2016-09-10 10:01 Michael Ellerman
2017-03-14 10:51 ` Michael Ellerman
2017-03-21 11:36 ` Michael Ellerman
0 siblings, 2 replies; 10+ messages in thread
From: Michael Ellerman @ 2016-09-10 10:01 UTC (permalink / raw)
To: linux-pcmcia; +Cc: linuxppc-dev, arnd, linux-kernel
We'd like to eventually remove NO_IRQ on powerpc, so remove usages of it
from electra_cf.c which is a powerpc-only driver.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
drivers/pcmcia/electra_cf.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pcmcia/electra_cf.c b/drivers/pcmcia/electra_cf.c
index 4d7bc3f4124a..c6fe2a4a7a6a 100644
--- a/drivers/pcmcia/electra_cf.c
+++ b/drivers/pcmcia/electra_cf.c
@@ -207,7 +207,7 @@ static int electra_cf_probe(struct platform_device *ofdev)
return -ENOMEM;
setup_timer(&cf->timer, electra_cf_timer, (unsigned long)cf);
- cf->irq = NO_IRQ;
+ cf->irq = 0;
cf->ofdev = ofdev;
cf->mem_phys = mem.start;
@@ -313,7 +313,7 @@ fail3:
fail2:
release_mem_region(cf->mem_phys, cf->mem_size);
fail1:
- if (cf->irq != NO_IRQ)
+ if (cf->irq)
free_irq(cf->irq, cf);
if (cf->io_virt)
--
2.7.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH] drivers/pcmcia: NO_IRQ removal for electra_cf.c
2016-09-10 10:01 [PATCH] drivers/pcmcia: NO_IRQ removal for electra_cf.c Michael Ellerman
@ 2017-03-14 10:51 ` Michael Ellerman
2017-03-14 12:47 ` Arnd Bergmann
2017-03-21 11:36 ` Michael Ellerman
1 sibling, 1 reply; 10+ messages in thread
From: Michael Ellerman @ 2017-03-14 10:51 UTC (permalink / raw)
To: linux-pcmcia; +Cc: linuxppc-dev, linux-kernel, arnd
Michael Ellerman <mpe@ellerman.id.au> writes:
> We'd like to eventually remove NO_IRQ on powerpc, so remove usages of it
> from electra_cf.c which is a powerpc-only driver.
>
> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
> ---
> drivers/pcmcia/electra_cf.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
Ping anyone?
Or should I merge this via the powerpc tree?
cheers
> diff --git a/drivers/pcmcia/electra_cf.c b/drivers/pcmcia/electra_cf.c
> index 4d7bc3f4124a..c6fe2a4a7a6a 100644
> --- a/drivers/pcmcia/electra_cf.c
> +++ b/drivers/pcmcia/electra_cf.c
> @@ -207,7 +207,7 @@ static int electra_cf_probe(struct platform_device *ofdev)
> return -ENOMEM;
>
> setup_timer(&cf->timer, electra_cf_timer, (unsigned long)cf);
> - cf->irq = NO_IRQ;
> + cf->irq = 0;
>
> cf->ofdev = ofdev;
> cf->mem_phys = mem.start;
> @@ -313,7 +313,7 @@ fail3:
> fail2:
> release_mem_region(cf->mem_phys, cf->mem_size);
> fail1:
> - if (cf->irq != NO_IRQ)
> + if (cf->irq)
> free_irq(cf->irq, cf);
>
> if (cf->io_virt)
> --
> 2.7.4
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] drivers/pcmcia: NO_IRQ removal for electra_cf.c
2017-03-14 10:51 ` Michael Ellerman
@ 2017-03-14 12:47 ` Arnd Bergmann
2017-03-15 5:35 ` Michael Ellerman
0 siblings, 1 reply; 10+ messages in thread
From: Arnd Bergmann @ 2017-03-14 12:47 UTC (permalink / raw)
To: Michael Ellerman; +Cc: linux-pcmcia, linuxppc-dev, Linux Kernel Mailing List
On Tue, Mar 14, 2017 at 11:51 AM, Michael Ellerman <mpe@ellerman.id.au> wrote:
> Michael Ellerman <mpe@ellerman.id.au> writes:
>
>> We'd like to eventually remove NO_IRQ on powerpc, so remove usages of it
>> from electra_cf.c which is a powerpc-only driver.
>>
>> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
>> ---
>> drivers/pcmcia/electra_cf.c | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> Ping anyone?
>
> Or should I merge this via the powerpc tree?
That's what I would recommend for a powerpc specific pcmcia driver, yes.
Looking at the bigger picture of powerpc drivers using NO_IRQ, I also
see these others:
drivers/ata/pata_mpc52xx.c: if (ata_irq == NO_IRQ) {
drivers/ata/sata_dwc_460ex.c:#ifndef NO_IRQ
drivers/ata/sata_dwc_460ex.c:#define NO_IRQ 0
drivers/ata/sata_dwc_460ex.c: if (hsdev->dma->irq == NO_IRQ) {
drivers/ata/sata_dwc_460ex.c: if (irq == NO_IRQ) {
drivers/iommu/fsl_pamu.c: if (irq == NO_IRQ) {
drivers/iommu/fsl_pamu.c: if (irq != NO_IRQ)
drivers/media/platform/fsl-viu.c: if (viu_irq == NO_IRQ) {
drivers/mtd/nand/mpc5121_nfc.c: if (prv->irq == NO_IRQ) {
drivers/pcmcia/electra_cf.c: cf->irq = NO_IRQ;
drivers/pcmcia/electra_cf.c: if (cf->irq != NO_IRQ)
drivers/soc/fsl/qe/qe_ic.c:/* Return an interrupt vector or NO_IRQ if
no interrupt is pending. */
drivers/soc/fsl/qe/qe_ic.c: return NO_IRQ;
drivers/soc/fsl/qe/qe_ic.c:/* Return an interrupt vector or NO_IRQ if
no interrupt is pending. */
drivers/soc/fsl/qe/qe_ic.c: return NO_IRQ;
drivers/soc/fsl/qe/qe_ic.c: if (qe_ic->virq_low == NO_IRQ) {
drivers/soc/fsl/qe/qe_ic.c: if (qe_ic->virq_high != NO_IRQ &&
drivers/spi/spi-mpc52xx.c: if (status && (irq != NO_IRQ))
drivers/tty/ehv_bytechan.c: if (stdout_irq == NO_IRQ) {
drivers/tty/ehv_bytechan.c: if ((bc->rx_irq == NO_IRQ) ||
(bc->tx_irq == NO_IRQ)) {
drivers/tty/serial/cpm_uart/cpm_uart_core.c: if (pinfo->port.irq == NO_IRQ) {
drivers/uio/uio_fsl_elbc_gpcm.c: if (irq != NO_IRQ) {
drivers/uio/uio_fsl_elbc_gpcm.c: irq = NO_IRQ;
drivers/uio/uio_fsl_elbc_gpcm.c: irq != NO_IRQ ? irq : -1);
drivers/usb/host/ehci-grlib.c: if (irq == NO_IRQ) {
drivers/usb/host/ehci-ppc-of.c: if (irq == NO_IRQ) {
drivers/usb/host/fhci-hcd.c: if (usb_irq == NO_IRQ) {
drivers/usb/host/ohci-ppc-of.c: if (irq == NO_IRQ) {
drivers/usb/host/uhci-grlib.c: if (irq == NO_IRQ) {
drivers/video/fbdev/mb862xx/mb862xxfbdrv.c: if (par->irq == NO_IRQ) {
drivers/virt/fsl_hypervisor.c: if (!handle || (irq == NO_IRQ)) {
include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
include/soc/fsl/qe/qe_ic.h: if (cascade_irq == NO_IRQ)
include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
Did you have other pending patches for those?
Arnd
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] drivers/pcmcia: NO_IRQ removal for electra_cf.c
2017-03-14 12:47 ` Arnd Bergmann
@ 2017-03-15 5:35 ` Michael Ellerman
2017-03-15 12:07 ` Arnd Bergmann
2017-03-15 17:50 ` Scott Wood
0 siblings, 2 replies; 10+ messages in thread
From: Michael Ellerman @ 2017-03-15 5:35 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-pcmcia, linuxppc-dev, Linux Kernel Mailing List, oss,
qiang.zhao, claudiu.manoil
Arnd Bergmann <arnd@arndb.de> writes:
> On Tue, Mar 14, 2017 at 11:51 AM, Michael Ellerman <mpe@ellerman.id.au> wrote:
>> Michael Ellerman <mpe@ellerman.id.au> writes:
>>
>>> We'd like to eventually remove NO_IRQ on powerpc, so remove usages of it
>>> from electra_cf.c which is a powerpc-only driver.
>>>
>>> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
>>> ---
>>> drivers/pcmcia/electra_cf.c | 4 ++--
>>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> Ping anyone?
>>
>> Or should I merge this via the powerpc tree?
>
> That's what I would recommend for a powerpc specific pcmcia driver, yes.
Suits me.
> Looking at the bigger picture of powerpc drivers using NO_IRQ, I also
> see these others:
>
> drivers/ata/pata_mpc52xx.c: if (ata_irq == NO_IRQ) {
> drivers/ata/sata_dwc_460ex.c:#ifndef NO_IRQ
> drivers/ata/sata_dwc_460ex.c:#define NO_IRQ 0
> drivers/ata/sata_dwc_460ex.c: if (hsdev->dma->irq == NO_IRQ) {
> drivers/ata/sata_dwc_460ex.c: if (irq == NO_IRQ) {
> drivers/iommu/fsl_pamu.c: if (irq == NO_IRQ) {
> drivers/iommu/fsl_pamu.c: if (irq != NO_IRQ)
> drivers/media/platform/fsl-viu.c: if (viu_irq == NO_IRQ) {
> drivers/mtd/nand/mpc5121_nfc.c: if (prv->irq == NO_IRQ) {
> drivers/pcmcia/electra_cf.c: cf->irq = NO_IRQ;
> drivers/pcmcia/electra_cf.c: if (cf->irq != NO_IRQ)
> drivers/soc/fsl/qe/qe_ic.c:/* Return an interrupt vector or NO_IRQ if
> no interrupt is pending. */
> drivers/soc/fsl/qe/qe_ic.c: return NO_IRQ;
> drivers/soc/fsl/qe/qe_ic.c:/* Return an interrupt vector or NO_IRQ if
> no interrupt is pending. */
> drivers/soc/fsl/qe/qe_ic.c: return NO_IRQ;
> drivers/soc/fsl/qe/qe_ic.c: if (qe_ic->virq_low == NO_IRQ) {
> drivers/soc/fsl/qe/qe_ic.c: if (qe_ic->virq_high != NO_IRQ &&
> drivers/spi/spi-mpc52xx.c: if (status && (irq != NO_IRQ))
> drivers/tty/ehv_bytechan.c: if (stdout_irq == NO_IRQ) {
> drivers/tty/ehv_bytechan.c: if ((bc->rx_irq == NO_IRQ) ||
> (bc->tx_irq == NO_IRQ)) {
> drivers/tty/serial/cpm_uart/cpm_uart_core.c: if (pinfo->port.irq == NO_IRQ) {
> drivers/uio/uio_fsl_elbc_gpcm.c: if (irq != NO_IRQ) {
> drivers/uio/uio_fsl_elbc_gpcm.c: irq = NO_IRQ;
> drivers/uio/uio_fsl_elbc_gpcm.c: irq != NO_IRQ ? irq : -1);
> drivers/usb/host/ehci-grlib.c: if (irq == NO_IRQ) {
> drivers/usb/host/ehci-ppc-of.c: if (irq == NO_IRQ) {
> drivers/usb/host/fhci-hcd.c: if (usb_irq == NO_IRQ) {
> drivers/usb/host/ohci-ppc-of.c: if (irq == NO_IRQ) {
> drivers/usb/host/uhci-grlib.c: if (irq == NO_IRQ) {
> drivers/video/fbdev/mb862xx/mb862xxfbdrv.c: if (par->irq == NO_IRQ) {
> drivers/virt/fsl_hypervisor.c: if (!handle || (irq == NO_IRQ)) {
> include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
> include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
> include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
> include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
> include/soc/fsl/qe/qe_ic.h: if (cascade_irq == NO_IRQ)
> include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
>
> Did you have other pending patches for those?
No. I stayed away from anything FSL related as I was under the
impression some of them were being ported to arch/arm, which uses -1 for
NO_IRQ IIUIC.
eg. all of include/soc/fsl and drivers/soc/fsl was moved from
arch/powerpc in commit 7aa1aa6ecec2, which said:
QE: Move QE from arch/powerpc to drivers/soc
ls1 has qe and ls1 has arm cpu.
move qe from arch/powerpc to drivers/soc/fsl
to adapt to powerpc and arm
But looking at the Kconfigs it looks like they're still only selectable
on PPC. So that's a bit annoying.
I'll do patches for everything above that's not drivers/soc or
include/soc and hopefully we can hear from someone at NXP on the plans
for getting the soc parts enabled on arm.
cheers
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] drivers/pcmcia: NO_IRQ removal for electra_cf.c
2017-03-15 5:35 ` Michael Ellerman
@ 2017-03-15 12:07 ` Arnd Bergmann
2017-03-16 9:55 ` Michael Ellerman
2017-03-15 17:50 ` Scott Wood
1 sibling, 1 reply; 10+ messages in thread
From: Arnd Bergmann @ 2017-03-15 12:07 UTC (permalink / raw)
To: Michael Ellerman
Cc: linux-pcmcia, Linux Kernel Mailing List, oss, linuxppc-dev,
Claudiu Manoil, qiang.zhao
On Wed, Mar 15, 2017 at 6:35 AM, Michael Ellerman <mpe@ellerman.id.au> wrote:
> Arnd Bergmann <arnd@arndb.de> writes:
>> On Tue, Mar 14, 2017 at 11:51 AM, Michael Ellerman <mpe@ellerman.id.au> wrote:
>>> Michael Ellerman <mpe@ellerman.id.au> writes:
>>>
>>
>> drivers/ata/pata_mpc52xx.c: if (ata_irq == NO_IRQ) {
>> drivers/ata/sata_dwc_460ex.c:#ifndef NO_IRQ
>> drivers/ata/sata_dwc_460ex.c:#define NO_IRQ 0
>> drivers/ata/sata_dwc_460ex.c: if (hsdev->dma->irq == NO_IRQ) {
>> drivers/ata/sata_dwc_460ex.c: if (irq == NO_IRQ) {
>> drivers/iommu/fsl_pamu.c: if (irq == NO_IRQ) {
>> drivers/iommu/fsl_pamu.c: if (irq != NO_IRQ)
>> drivers/media/platform/fsl-viu.c: if (viu_irq == NO_IRQ) {
>> drivers/mtd/nand/mpc5121_nfc.c: if (prv->irq == NO_IRQ) {
>> drivers/pcmcia/electra_cf.c: cf->irq = NO_IRQ;
>> drivers/pcmcia/electra_cf.c: if (cf->irq != NO_IRQ)
>> drivers/soc/fsl/qe/qe_ic.c:/* Return an interrupt vector or NO_IRQ if
>> no interrupt is pending. */
>> drivers/soc/fsl/qe/qe_ic.c: return NO_IRQ;
>> drivers/soc/fsl/qe/qe_ic.c:/* Return an interrupt vector or NO_IRQ if
>> no interrupt is pending. */
>> drivers/soc/fsl/qe/qe_ic.c: return NO_IRQ;
>> drivers/soc/fsl/qe/qe_ic.c: if (qe_ic->virq_low == NO_IRQ) {
>> drivers/soc/fsl/qe/qe_ic.c: if (qe_ic->virq_high != NO_IRQ &&
>> drivers/spi/spi-mpc52xx.c: if (status && (irq != NO_IRQ))
>> drivers/tty/ehv_bytechan.c: if (stdout_irq == NO_IRQ) {
>> drivers/tty/ehv_bytechan.c: if ((bc->rx_irq == NO_IRQ) ||
>> (bc->tx_irq == NO_IRQ)) {
>> drivers/tty/serial/cpm_uart/cpm_uart_core.c: if (pinfo->port.irq == NO_IRQ) {
>> drivers/uio/uio_fsl_elbc_gpcm.c: if (irq != NO_IRQ) {
>> drivers/uio/uio_fsl_elbc_gpcm.c: irq = NO_IRQ;
>> drivers/uio/uio_fsl_elbc_gpcm.c: irq != NO_IRQ ? irq : -1);
>> drivers/usb/host/ehci-grlib.c: if (irq == NO_IRQ) {
>> drivers/usb/host/ehci-ppc-of.c: if (irq == NO_IRQ) {
>> drivers/usb/host/fhci-hcd.c: if (usb_irq == NO_IRQ) {
>> drivers/usb/host/ohci-ppc-of.c: if (irq == NO_IRQ) {
>> drivers/usb/host/uhci-grlib.c: if (irq == NO_IRQ) {
>> drivers/video/fbdev/mb862xx/mb862xxfbdrv.c: if (par->irq == NO_IRQ) {
>> drivers/virt/fsl_hypervisor.c: if (!handle || (irq == NO_IRQ)) {
>> include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
>> include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
>> include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
>> include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
>> include/soc/fsl/qe/qe_ic.h: if (cascade_irq == NO_IRQ)
>> include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
>>
>> Did you have other pending patches for those?
>
> No. I stayed away from anything FSL related as I was under the
> impression some of them were being ported to arch/arm, which uses -1 for
> NO_IRQ IIUIC.
>
> eg. all of include/soc/fsl and drivers/soc/fsl was moved from
> arch/powerpc in commit 7aa1aa6ecec2, which said:
>
> QE: Move QE from arch/powerpc to drivers/soc
>
> ls1 has qe and ls1 has arm cpu.
> move qe from arch/powerpc to drivers/soc/fsl
> to adapt to powerpc and arm
>
> But looking at the Kconfigs it looks like they're still only selectable
> on PPC. So that's a bit annoying.
>
> I'll do patches for everything above that's not drivers/soc or
> include/soc and hopefully we can hear from someone at NXP on the plans
> for getting the soc parts enabled on arm.
I think the removal of the NO_IRQ references is a requirement for
getting the drivers working properly on ARM, as the OF platform
code will use '0' for invalid IRQs.
Arnd
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] drivers/pcmcia: NO_IRQ removal for electra_cf.c
2017-03-15 5:35 ` Michael Ellerman
2017-03-15 12:07 ` Arnd Bergmann
@ 2017-03-15 17:50 ` Scott Wood
2017-03-16 9:53 ` Michael Ellerman
1 sibling, 1 reply; 10+ messages in thread
From: Scott Wood @ 2017-03-15 17:50 UTC (permalink / raw)
To: Michael Ellerman, Arnd Bergmann
Cc: linux-pcmcia, linuxppc-dev, Linux Kernel Mailing List,
qiang.zhao, claudiu.manoil
On Wed, 2017-03-15 at 16:35 +1100, Michael Ellerman wrote:
> Arnd Bergmann <arnd@arndb.de> writes:
>
> >
> > On Tue, Mar 14, 2017 at 11:51 AM, Michael Ellerman <mpe@ellerman.id.au>
> > wrote:
> > >
> > > Michael Ellerman <mpe@ellerman.id.au> writes:
> > >
> > > >
> > > > We'd like to eventually remove NO_IRQ on powerpc, so remove usages of
> > > > it
> > > > from electra_cf.c which is a powerpc-only driver.
> > > >
> > > > Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
> > > > ---
> > > > drivers/pcmcia/electra_cf.c | 4 ++--
> > > > 1 file changed, 2 insertions(+), 2 deletions(-)
> > > Ping anyone?
> > >
> > > Or should I merge this via the powerpc tree?
> > That's what I would recommend for a powerpc specific pcmcia driver, yes.
> Suits me.
>
> >
> > Looking at the bigger picture of powerpc drivers using NO_IRQ, I also
> > see these others:
> >
> > drivers/ata/pata_mpc52xx.c: if (ata_irq == NO_IRQ) {
> > drivers/ata/sata_dwc_460ex.c:#ifndef NO_IRQ
> > drivers/ata/sata_dwc_460ex.c:#define NO_IRQ 0
> > drivers/ata/sata_dwc_460ex.c: if (hsdev->dma->irq == NO_IRQ) {
> > drivers/ata/sata_dwc_460ex.c: if (irq == NO_IRQ) {
> > drivers/iommu/fsl_pamu.c: if (irq == NO_IRQ) {
> > drivers/iommu/fsl_pamu.c: if (irq != NO_IRQ)
> > drivers/media/platform/fsl-viu.c: if (viu_irq == NO_IRQ) {
> > drivers/mtd/nand/mpc5121_nfc.c: if (prv->irq == NO_IRQ) {
> > drivers/pcmcia/electra_cf.c: cf->irq = NO_IRQ;
> > drivers/pcmcia/electra_cf.c: if (cf->irq != NO_IRQ)
> > drivers/soc/fsl/qe/qe_ic.c:/* Return an interrupt vector or NO_IRQ if
> > no interrupt is pending. */
> > drivers/soc/fsl/qe/qe_ic.c: return NO_IRQ;
> > drivers/soc/fsl/qe/qe_ic.c:/* Return an interrupt vector or NO_IRQ if
> > no interrupt is pending. */
> > drivers/soc/fsl/qe/qe_ic.c: return NO_IRQ;
> > drivers/soc/fsl/qe/qe_ic.c: if (qe_ic->virq_low == NO_IRQ) {
> > drivers/soc/fsl/qe/qe_ic.c: if (qe_ic->virq_high != NO_IRQ &&
> > drivers/spi/spi-mpc52xx.c: if (status && (irq != NO_IRQ))
> > drivers/tty/ehv_bytechan.c: if (stdout_irq == NO_IRQ) {
> > drivers/tty/ehv_bytechan.c: if ((bc->rx_irq == NO_IRQ) ||
> > (bc->tx_irq == NO_IRQ)) {
> > drivers/tty/serial/cpm_uart/cpm_uart_core.c: if (pinfo->port.irq ==
> > NO_IRQ) {
> > drivers/uio/uio_fsl_elbc_gpcm.c: if (irq != NO_IRQ) {
> > drivers/uio/uio_fsl_elbc_gpcm.c: irq = NO_IRQ;
> > drivers/uio/uio_fsl_elbc_gpcm.c: irq != NO_IRQ ? irq :
> > -1);
> > drivers/usb/host/ehci-grlib.c: if (irq == NO_IRQ) {
> > drivers/usb/host/ehci-ppc-of.c: if (irq == NO_IRQ) {
> > drivers/usb/host/fhci-hcd.c: if (usb_irq == NO_IRQ) {
> > drivers/usb/host/ohci-ppc-of.c: if (irq == NO_IRQ) {
> > drivers/usb/host/uhci-grlib.c: if (irq == NO_IRQ) {
> > drivers/video/fbdev/mb862xx/mb862xxfbdrv.c: if (par->irq == NO_IRQ) {
> > drivers/virt/fsl_hypervisor.c: if (!handle || (irq == NO_IRQ)) {
> > include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
> > include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
> > include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
> > include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
> > include/soc/fsl/qe/qe_ic.h: if (cascade_irq == NO_IRQ)
> > include/soc/fsl/qe/qe_ic.h: if (cascade_irq != NO_IRQ)
> >
> > Did you have other pending patches for those?
> No. I stayed away from anything FSL related as I was under the
> impression some of them were being ported to arch/arm, which uses -1 for
> NO_IRQ IIUIC.
>
> eg. all of include/soc/fsl and drivers/soc/fsl was moved from
> arch/powerpc in commit 7aa1aa6ecec2, which said:
>
> QE: Move QE from arch/powerpc to drivers/soc
>
> ls1 has qe and ls1 has arm cpu.
> move qe from arch/powerpc to drivers/soc/fsl
> to adapt to powerpc and arm
>
> But looking at the Kconfigs it looks like they're still only selectable
> on PPC. So that's a bit annoying.
>
> I'll do patches for everything above that's not drivers/soc or
> include/soc and hopefully we can hear from someone at NXP on the plans
> for getting the soc parts enabled on arm.
qe_ic is handled by https://lkml.org/lkml/2017/3/13/1234
-Scott
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] drivers/pcmcia: NO_IRQ removal for electra_cf.c
2017-03-15 17:50 ` Scott Wood
@ 2017-03-16 9:53 ` Michael Ellerman
0 siblings, 0 replies; 10+ messages in thread
From: Michael Ellerman @ 2017-03-16 9:53 UTC (permalink / raw)
To: Scott Wood, Arnd Bergmann
Cc: linux-pcmcia, linuxppc-dev, Linux Kernel Mailing List,
qiang.zhao, claudiu.manoil
Scott Wood <oss@buserror.net> writes:
> On Wed, 2017-03-15 at 16:35 +1100, Michael Ellerman wrote:
>> I'll do patches for everything above that's not drivers/soc or
>> include/soc and hopefully we can hear from someone at NXP on the plans
>> for getting the soc parts enabled on arm.
>
> qe_ic is handled by https://lkml.org/lkml/2017/3/13/1234
Thanks.
cheers
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] drivers/pcmcia: NO_IRQ removal for electra_cf.c
2017-03-15 12:07 ` Arnd Bergmann
@ 2017-03-16 9:55 ` Michael Ellerman
2017-03-16 10:05 ` Arnd Bergmann
0 siblings, 1 reply; 10+ messages in thread
From: Michael Ellerman @ 2017-03-16 9:55 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-pcmcia, Linux Kernel Mailing List, oss, linuxppc-dev,
Claudiu Manoil, qiang.zhao
Arnd Bergmann <arnd@arndb.de> writes:
> On Wed, Mar 15, 2017 at 6:35 AM, Michael Ellerman <mpe@ellerman.id.au> wrote:
>> I'll do patches for everything above that's not drivers/soc or
>> include/soc and hopefully we can hear from someone at NXP on the plans
>> for getting the soc parts enabled on arm.
>
> I think the removal of the NO_IRQ references is a requirement for
> getting the drivers working properly on ARM, as the OF platform
> code will use '0' for invalid IRQs.
OK. So the #define NO_IRQ (-1) in arch/arm/include/asm/irq.h is a red
herring and should be ignored for anything modern?
cheers
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] drivers/pcmcia: NO_IRQ removal for electra_cf.c
2017-03-16 9:55 ` Michael Ellerman
@ 2017-03-16 10:05 ` Arnd Bergmann
0 siblings, 0 replies; 10+ messages in thread
From: Arnd Bergmann @ 2017-03-16 10:05 UTC (permalink / raw)
To: Michael Ellerman
Cc: linux-pcmcia, Linux Kernel Mailing List, oss, linuxppc-dev,
Claudiu Manoil, qiang.zhao
On Thu, Mar 16, 2017 at 10:55 AM, Michael Ellerman <mpe@ellerman.id.au> wrote:
> Arnd Bergmann <arnd@arndb.de> writes:
>> On Wed, Mar 15, 2017 at 6:35 AM, Michael Ellerman <mpe@ellerman.id.au> wrote:
>>> I'll do patches for everything above that's not drivers/soc or
>>> include/soc and hopefully we can hear from someone at NXP on the plans
>>> for getting the soc parts enabled on arm.
>>
>> I think the removal of the NO_IRQ references is a requirement for
>> getting the drivers working properly on ARM, as the OF platform
>> code will use '0' for invalid IRQs.
>
> OK. So the #define NO_IRQ (-1) in arch/arm/include/asm/irq.h is a red
> herring and should be ignored for anything modern?
Correct. There are a couple of older (non-DT) platforms that still rely on it,
and I also have patches for those, which I intend to revisit at some point.
Arnd
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: drivers/pcmcia: NO_IRQ removal for electra_cf.c
2016-09-10 10:01 [PATCH] drivers/pcmcia: NO_IRQ removal for electra_cf.c Michael Ellerman
2017-03-14 10:51 ` Michael Ellerman
@ 2017-03-21 11:36 ` Michael Ellerman
1 sibling, 0 replies; 10+ messages in thread
From: Michael Ellerman @ 2017-03-21 11:36 UTC (permalink / raw)
To: Michael Ellerman, linux-pcmcia; +Cc: linuxppc-dev, linux-kernel, arnd
On Sat, 2016-09-10 at 10:01:30 UTC, Michael Ellerman wrote:
> We'd like to eventually remove NO_IRQ on powerpc, so remove usages of it
> from electra_cf.c which is a powerpc-only driver.
>
> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Applied to powerpc next.
https://git.kernel.org/powerpc/c/6c8343e82bec46ece4fe773304a84c
cheers
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2017-03-21 11:44 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-10 10:01 [PATCH] drivers/pcmcia: NO_IRQ removal for electra_cf.c Michael Ellerman
2017-03-14 10:51 ` Michael Ellerman
2017-03-14 12:47 ` Arnd Bergmann
2017-03-15 5:35 ` Michael Ellerman
2017-03-15 12:07 ` Arnd Bergmann
2017-03-16 9:55 ` Michael Ellerman
2017-03-16 10:05 ` Arnd Bergmann
2017-03-15 17:50 ` Scott Wood
2017-03-16 9:53 ` Michael Ellerman
2017-03-21 11:36 ` Michael Ellerman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).