From: Felipe Balbi <balbi@kernel.org>
To: Baolin Wang <baolin.wang@linaro.org>, mathias.nyman@intel.com
Cc: gregkh@linuxfoundation.org, broonie@kernel.org,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
baolin.wang@linaro.org
Subject: Re: [PATCH v5 2/2] usb: dwc3: core: Support the dwc3 host suspend/resume
Date: Mon, 16 Jan 2017 12:28:30 +0200 [thread overview]
Message-ID: <87bmv7nvsh.fsf@linux.intel.com> (raw)
In-Reply-To: <65c23bd7ea99c3ebfffd2ded65e32a0446814c38.1481532028.git.baolin.wang@linaro.org>
[-- Attachment #1: Type: text/plain, Size: 4881 bytes --]
Hi,
Baolin Wang <baolin.wang@linaro.org> writes:
> For some mobile devices with strict power management, we also want to suspend
> the host when the slave is detached for power saving. Thus we add the host
> suspend/resume functions to support this requirement.
>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> ---
> Changes since v4:
> - Remove Kconfig and just enable host suspend/resume.
> - Simplify the dwc3_host_suspend/resume() function.
>
> Changes since v3:
> - No updates.
>
> Changes since v2:
> - Remove pm_children_suspended() and other unused macros.
>
> Changes since v1:
> - Add pm_runtime.h head file to avoid kbuild error.
> ---
> drivers/usb/dwc3/core.c | 26 +++++++++++++++++++++++++-
> drivers/usb/dwc3/core.h | 7 +++++++
> drivers/usb/dwc3/host.c | 21 +++++++++++++++++++++
> 3 files changed, 53 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 9a4a5e4..7ad4bc3 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -1091,6 +1091,7 @@ static int dwc3_probe(struct platform_device *pdev)
> pm_runtime_use_autosuspend(dev);
> pm_runtime_set_autosuspend_delay(dev, DWC3_DEFAULT_AUTOSUSPEND_DELAY);
> pm_runtime_enable(dev);
> + pm_suspend_ignore_children(dev, true);
> ret = pm_runtime_get_sync(dev);
> if (ret < 0)
> goto err1;
> @@ -1215,15 +1216,27 @@ static int dwc3_remove(struct platform_device *pdev)
> static int dwc3_suspend_common(struct dwc3 *dwc)
> {
> unsigned long flags;
> + int ret;
>
> switch (dwc->dr_mode) {
> case USB_DR_MODE_PERIPHERAL:
> + spin_lock_irqsave(&dwc->lock, flags);
> + dwc3_gadget_suspend(dwc);
> + spin_unlock_irqrestore(&dwc->lock, flags);
> + break;
> case USB_DR_MODE_OTG:
> + ret = dwc3_host_suspend(dwc);
> + if (ret)
> + return ret;
> +
> spin_lock_irqsave(&dwc->lock, flags);
> dwc3_gadget_suspend(dwc);
> spin_unlock_irqrestore(&dwc->lock, flags);
> break;
> case USB_DR_MODE_HOST:
> + ret = dwc3_host_suspend(dwc);
> + if (ret)
> + return ret;
> default:
> /* do nothing */
> break;
> @@ -1245,12 +1258,23 @@ static int dwc3_resume_common(struct dwc3 *dwc)
>
> switch (dwc->dr_mode) {
> case USB_DR_MODE_PERIPHERAL:
> + spin_lock_irqsave(&dwc->lock, flags);
> + dwc3_gadget_resume(dwc);
> + spin_unlock_irqrestore(&dwc->lock, flags);
> + break;
> case USB_DR_MODE_OTG:
> + ret = dwc3_host_resume(dwc);
> + if (ret)
> + return ret;
> +
> spin_lock_irqsave(&dwc->lock, flags);
> dwc3_gadget_resume(dwc);
> spin_unlock_irqrestore(&dwc->lock, flags);
> - /* FALLTHROUGH */
> + break;
> case USB_DR_MODE_HOST:
> + ret = dwc3_host_resume(dwc);
> + if (ret)
> + return ret;
> default:
> /* do nothing */
> break;
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index b585a30..1099168 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -1158,11 +1158,18 @@ static inline bool dwc3_is_usb31(struct dwc3 *dwc)
> #if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
> int dwc3_host_init(struct dwc3 *dwc);
> void dwc3_host_exit(struct dwc3 *dwc);
> +int dwc3_host_suspend(struct dwc3 *dwc);
> +int dwc3_host_resume(struct dwc3 *dwc);
> #else
> static inline int dwc3_host_init(struct dwc3 *dwc)
> { return 0; }
> static inline void dwc3_host_exit(struct dwc3 *dwc)
> { }
> +
> +static inline int dwc3_host_suspend(struct dwc3 *dwc)
> +{ return 0; }
> +static inline int dwc3_host_resume(struct dwc3 *dwc)
> +{ return 0; }
> #endif
>
> #if IS_ENABLED(CONFIG_USB_DWC3_GADGET) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
> diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
> index ed82464..7959ef0 100644
> --- a/drivers/usb/dwc3/host.c
> +++ b/drivers/usb/dwc3/host.c
> @@ -16,6 +16,7 @@
> */
>
> #include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
>
> #include "core.h"
>
> @@ -130,3 +131,23 @@ void dwc3_host_exit(struct dwc3 *dwc)
> dev_name(&dwc->xhci->dev));
> platform_device_unregister(dwc->xhci);
> }
> +
> +int dwc3_host_suspend(struct dwc3 *dwc)
> +{
> + struct device *xhci = &dwc->xhci->dev;
> +
> + /*
> + * Note: if we get the -EBUSY, which means the xHCI children devices are
> + * not in suspend state yet, the glue layer need to wait for a while and
> + * try to suspend xHCI device again.
> + */
> + return pm_runtime_put_sync(xhci);
> +}
> +
> +int dwc3_host_resume(struct dwc3 *dwc)
> +{
> + struct device *xhci = &dwc->xhci->dev;
> +
> + /* Resume the xHCI device synchronously. */
> + return pm_runtime_get_sync(xhci);
> +}
> --
> 1.7.9.5
I can't take this without Mathias taking xhci side of things.
--
balbi
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
next prev parent reply other threads:[~2017-01-16 10:30 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-13 7:49 [PATCH v5 1/2] usb: host: plat: Enable xhci plat runtime PM Baolin Wang
2016-12-13 7:49 ` [PATCH v5 2/2] usb: dwc3: core: Support the dwc3 host suspend/resume Baolin Wang
2017-01-16 10:28 ` Felipe Balbi [this message]
2017-01-16 10:53 ` Baolin Wang
2017-01-25 17:31 ` Robert Foss
2017-01-16 10:56 ` [PATCH v5 1/2] usb: host: plat: Enable xhci plat runtime PM Baolin Wang
2017-01-31 13:14 ` Mathias Nyman
2017-02-06 5:26 ` Baolin Wang
2017-02-20 2:47 ` Baolin Wang
2017-02-20 15:10 ` Mathias Nyman
2017-02-21 2:09 ` Baolin Wang
2017-03-21 7:55 ` Baolin Wang
2017-03-21 8:07 ` Felipe Balbi
2017-03-22 5:07 ` Baolin Wang
2017-03-22 9:00 ` Felipe Balbi
2017-03-22 10:40 ` Baolin Wang
2017-03-22 12:43 ` Mathias Nyman
2017-03-23 2:17 ` Baolin Wang
2017-01-25 17:30 ` Robert Foss
2017-02-06 5:27 ` Baolin Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87bmv7nvsh.fsf@linux.intel.com \
--to=balbi@kernel.org \
--cc=baolin.wang@linaro.org \
--cc=broonie@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).