From: John Ogness <john.ogness@linutronix.de>
To: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>,
Steven Rostedt <rostedt@goodmis.org>,
Thomas Gleixner <tglx@linutronix.de>,
linux-kernel@vger.kernel.org,
Geert Uytterhoeven <geert@linux-m68k.org>,
linux-m68k@lists.linux-m68k.org
Subject: Re: [PATCH printk v3 24/40] tty: nfcon: use console_is_registered()
Date: Thu, 10 Nov 2022 15:25:02 +0106 [thread overview]
Message-ID: <87cz9u6gfd.fsf@jogness.linutronix.de> (raw)
In-Reply-To: <Y20DoLPsrfgm528O@alley>
On 2022-11-10, Petr Mladek <pmladek@suse.com> wrote:
>> diff --git a/arch/m68k/emu/nfcon.c b/arch/m68k/emu/nfcon.c
>> index 557d60867f98..292669fa480f 100644
>> --- a/arch/m68k/emu/nfcon.c
>> +++ b/arch/m68k/emu/nfcon.c
>> @@ -49,14 +49,14 @@ static void nfcon_write(struct console *con, const char *str,
>> static struct tty_driver *nfcon_device(struct console *con, int *index)
>> {
>> *index = 0;
>> - return (con->flags & CON_ENABLED) ? nfcon_tty_driver : NULL;
>> + return console_is_registered(con) ? nfcon_tty_driver : NULL;
>> }
>>
>> static struct console nf_console = {
>> .name = "nfcon",
>> .write = nfcon_write,
>> .device = nfcon_device,
>> - .flags = CON_PRINTBUFFER,
>> + .flags = CON_PRINTBUFFER | CON_ENABLED,
>
> This causes that register_console() will always put the console into
> console_list. It causes regression, see below.
Agreed. Nice catch. I will remove initializing with CON_ENABLED.
>> .index = -1,
>> };
>>
>> @@ -106,10 +106,8 @@ static int __init nf_debug_setup(char *arg)
>> return 0;
>>
>> stderr_id = nf_get_id("NF_STDERR");
>> - if (stderr_id) {
>> - nf_console.flags |= CON_ENABLED;
>> + if (stderr_id)
>> register_console(&nf_console);
>
> My understanding is that this should enable the console
> when debug=nfcon kernel parameter is used.
>
> It is a non-standard way. This is why CON_ENABLED flag
> has to be explicitly set.
Understood. I will add a comment explaining why CON_ENABLED is set here.
>> - }
>>
>> return 0;
>> }
>> @@ -151,7 +149,7 @@ static int __init nfcon_init(void)
>>
>> nfcon_tty_driver = driver;
>>
>> - if (!(nf_console.flags & CON_ENABLED))
>> + if (!console_is_registered(&nf_console))
>> register_console(&nf_console);
>
> This calls register_console() when it was not already
> registered by the debug=nfcon early parameter.
>
> It is the standard way. It should enable the console only
> when console=nfcon is defined on the commandline. Or when
> there is no preferred console and no console enabled by default yet.
>
> We should not pre-set CON_ENABLED in this case.
Agreed. The hunk itself is OK.
John
next prev parent reply other threads:[~2022-11-10 14:19 UTC|newest]
Thread overview: 103+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-07 14:15 [PATCH printk v3 00/40] reduce console_lock scope John Ogness
2022-11-07 14:15 ` [PATCH printk v3 01/40] rcu: implement lockdep_rcu_enabled for !CONFIG_DEBUG_LOCK_ALLOC John Ogness
2022-11-07 18:01 ` Paul E. McKenney
2022-11-07 19:23 ` John Ogness
2022-11-08 19:27 ` Paul E. McKenney
2022-11-09 17:49 ` Paul E. McKenney
2022-11-08 10:29 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 02/40] serial: kgdboc: Lock console list in probe function John Ogness
2022-11-09 8:20 ` Daniel Thompson
2022-11-07 14:16 ` [PATCH printk v3 03/40] printk: Convert console_drivers list to hlist John Ogness
2022-11-07 14:16 ` [PATCH printk v3 04/40] printk: Prepare for SRCU console list protection John Ogness
2022-11-08 12:14 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 05/40] printk: fix setting first seq for consoles John Ogness
2022-11-08 12:20 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 06/40] um: kmsg_dump: only dump when no output console available John Ogness
2022-11-08 12:41 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 07/40] console: introduce console_is_enabled() wrapper John Ogness
2022-11-08 16:18 ` Petr Mladek
2022-11-10 15:05 ` John Ogness
2022-11-11 13:32 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 08/40] printk: use console_is_enabled() John Ogness
2022-11-08 17:40 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 09/40] um: kmsg_dump: " John Ogness
2022-11-09 14:52 ` Petr Mladek
2022-11-09 14:56 ` Petr Mladek
2022-11-09 14:57 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 10/40] kdb: kdb_io: " John Ogness
2022-11-09 8:22 ` Daniel Thompson
2022-11-09 14:59 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 11/40] um: kmsg_dumper: use srcu console list iterator John Ogness
2022-11-09 15:05 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 12/40] tty: serial: kgdboc: document console_lock usage John Ogness
2022-11-09 8:23 ` Daniel Thompson
2022-11-09 15:19 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 13/40] tty: tty_io: " John Ogness
2022-11-09 15:20 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 14/40] proc: consoles: " John Ogness
2022-11-09 15:22 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 15/40] kdb: use srcu console list iterator John Ogness
2022-11-09 8:53 ` Daniel Thompson
2022-11-09 9:27 ` John Ogness
2022-11-09 15:27 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 16/40] printk: console_flush_all: " John Ogness
2022-11-07 14:16 ` [PATCH printk v3 17/40] printk: console_unblank: " John Ogness
2022-11-07 14:16 ` [PATCH printk v3 18/40] printk: console_flush_on_panic: " John Ogness
2022-11-07 14:16 ` [PATCH printk v3 19/40] printk: console_device: " John Ogness
2022-11-09 15:58 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 20/40] printk: __pr_flush: " John Ogness
2022-11-07 14:16 ` [PATCH printk v3 21/40] printk: introduce console_list_lock John Ogness
2022-11-10 12:58 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 22/40] console: introduce console_is_registered() John Ogness
2022-11-10 13:00 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 23/40] serial_core: replace uart_console_enabled() with uart_console_registered() John Ogness
2022-11-08 8:46 ` Geert Uytterhoeven
2022-11-10 13:24 ` Petr Mladek
2022-11-10 13:46 ` John Ogness
2022-11-07 14:16 ` [PATCH printk v3 24/40] tty: nfcon: use console_is_registered() John Ogness
2022-11-08 8:39 ` Geert Uytterhoeven
2022-11-10 13:58 ` Petr Mladek
2022-11-10 14:19 ` John Ogness [this message]
2022-11-10 17:50 ` Eero Tamminen
2022-11-07 14:16 ` [PATCH printk v3 25/40] efi: earlycon: " John Ogness
2022-11-10 14:28 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 26/40] tty: hvc: " John Ogness
2022-11-10 14:52 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 27/40] tty: serial: earlycon: " John Ogness
2022-11-10 15:00 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 28/40] tty: serial: pic32_uart: " John Ogness
2022-11-10 15:01 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 29/40] tty: serial: samsung_tty: " John Ogness
2022-11-10 15:01 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 30/40] tty: serial: xilinx_uartps: " John Ogness
2022-11-10 15:04 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 31/40] usb: early: xhci-dbc: " John Ogness
2022-11-10 15:05 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 32/40] netconsole: avoid CON_ENABLED misuse to track registration John Ogness
2022-11-10 15:17 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 33/40] printk, xen: fbfront: create/use safe function for forcing preferred John Ogness
2022-11-10 15:34 ` Petr Mladek
2022-11-10 16:03 ` John Ogness
2022-11-10 17:26 ` Petr Mladek
2022-11-10 22:37 ` John Ogness
2022-11-11 10:48 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 34/40] tty: tty_io: use console_list_lock for list synchronization John Ogness
2022-11-07 14:16 ` [PATCH printk v3 35/40] proc: consoles: use console_list_lock for list iteration John Ogness
2022-11-07 14:16 ` [PATCH printk v3 36/40] tty: serial: kgdboc: use console_list_lock for list traversal John Ogness
2022-11-09 9:06 ` Daniel Thompson
2022-11-09 9:44 ` John Ogness
2022-11-10 18:00 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 37/40] tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console() John Ogness
2022-11-10 15:13 ` Daniel Thompson
2022-11-10 18:03 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 38/40] tty: serial: kgdboc: use console_list_lock to trap exit John Ogness
2022-11-10 15:18 ` Daniel Thompson
2022-11-11 9:59 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 39/40] printk: relieve console_lock of list synchronization duties John Ogness
2022-11-07 16:30 ` John Ogness
2022-11-11 10:27 ` Petr Mladek
2022-11-11 13:06 ` Petr Mladek
2022-11-07 14:16 ` [PATCH printk v3 40/40] tty: serial: sh-sci: use setup() callback for early console John Ogness
2022-11-08 8:53 ` Geert Uytterhoeven
2022-11-11 17:15 ` Petr Mladek
2022-11-11 14:43 ` [PATCH printk v3 00/40] reduce console_lock scope Mathieu Desnoyers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87cz9u6gfd.fsf@jogness.linutronix.de \
--to=john.ogness@linutronix.de \
--cc=geert@linux-m68k.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=pmladek@suse.com \
--cc=rostedt@goodmis.org \
--cc=senozhatsky@chromium.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).