netstat oopses 2.5.74

* netstat oopses 2.5.74
@ 2003-07-03 15:54 Jaakko Niemi
  2003-07-03 16:04 ` YOSHIFUJI Hideaki / 吉藤英明
  0 siblings, 1 reply; 3+ messages in thread
From: Jaakko Niemi @ 2003-07-03 15:54 UTC (permalink / raw)
  To: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 212 bytes --]

 Hi,

 I can reproduce attached oops by running 'netstat -na' after 
 logging in. Changing compiler from gcc 3.3 to 2.95 does not
 seem to change things. Please cc me on replies. 

 Thanks

                --j

[-- Attachment #2: oops.clean --]
[-- Type: application/octet-stream, Size: 15379 bytes --]

4> 4/128 requests per read queue
 4/128 requests per write queue
 enter congestion at 15
 exit congestion at 17
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Br
PCI: Using IRQ router PIIX [8086/2440] at 0000:00:1f.0
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B2,I1,P0) -> 19
PCI->APIC IRQ transform: (B2,I1,P1) -> 18
PCI->APIC IRQ transform: (B2,I1,P2) -> 16
PCI->APIC IRQ transform: (B2,I2,P0) -> 18
PCI->APIC IRQ transform: (B2,I2,P1) -> 17
PCI->APIC IRQ transform: (B2,I2,P2) -> 19
PCI->APIC IRQ transform: (B2,I8,P0) -> 17
PCI->APIC IRQ transform: (B2,I8,P0) -> 17
PCI->APIC IRQ transform: (B2,I12,P0) -> 18
pty: 256 Unix98 ptys configured
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
Machine check exception polling timer started.
Enabling SEP on CPU 0
Journalled Block Device driver loaded
Initializing Cryptographic API
PCI: Via IRQ fixup for 0000:02:01.0, from 9 to 3
PCI: Via IRQ fixup for 0000:02:01.1, from 10 to 2
PCI: Via IRQ fixup for 0000:02:02.0, from 10 to 2
PCI: Via IRQ fixup for 0000:02:02.1, from 5 to 1
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.11
hw_random hardware driver 1.0.0 loaded
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 4
ICH2: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: IC35L040AVER07-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
HPT366: IDE controller at PCI slot 0000:02:08.0
PCI: Enabling device 0000:02:08.0 (0005 -> 0007)
HPT366: chipset revision 1
HPT366: 100% native mode on irq 17
    ide2: BM-DMA at 0xd800-0xd807, BIOS settings: hde:DMA, hdf:pio
    ide3: BM-DMA at 0xd400-0xd407, BIOS settings: hdg:pio, hdh:pio
hde: WDC WD400BB-75DEA0, ATA DISK drive
ide2 at 0xdc78-0xdc7f,0xdc72 on irq 17
hda: max request size: 128KiB
hda: host protected area => 1
hda: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63, UDMA(100)
 hda: hda1 hda2 hda3
hde: max request size: 128KiB
hde: host protected area => 1
hde: setmax LBA 78165360, native  78125000
hde: 78125000 sectors (40000 MB) w/2048KiB Cache, CHS=77504/16/63, UDMA(66)
 hde: hde1 hde2
mice: PS/2 mouse device common for all mice
input: PC Speaker
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 328k freed
Adding 979956k swap on /dev/hde2.  Priority:-1 extents:1
EXT3 FS on hda1, internal journal
Intel(R) PRO/1000 Network Driver - version 5.1.11-k1
Copyright (c) 1999-2003 Intel Corporation.
eth0: Intel(R) PRO/1000 Network Connection
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: HL-DT-ST  Model: CD-RW GCE-8481B   Rev: C102
  Type:   CD-ROM                             ANSI SCSI revision: 02
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci-hcd 0000:02:01.0: VIA Technologies, In USB
uhci-hcd 0000:02:01.0: irq 19, io base 0000dce0
Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated.
uhci-hcd 0000:02:01.0: new USB bus registered, assigned bus number 1
drivers/usb/host/uhci-hcd.c: detected 2 ports
uhci-hcd 0000:02:01.0: root hub device address 1
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: VIA Technologies, In USB
usb usb1: Manufacturer: Linux 2.5.74 uhci-hcd
usb usb1: SerialNumber: 0000:02:01.0
usb usb1: usb_new_device - registering interface 1-0:0
hub 1-0:0: usb_device_probe
hub 1-0:0: usb_device_probe - got id
hub 1-0:0: USB hub found
hub 1-0:0: 2 ports detected
hub 1-0:0: standalone hub
hub 1-0:0: ganged power switching
hub 1-0:0: global over-current protection
hub 1-0:0: Port indicators are not supported
hub 1-0:0: power on to power good time: 2ms
hub 1-0:0: hub controller current requirement: 0mA
hub 1-0:0: local power source is good
hub 1-0:0: no over-current condition exists
hub 1-0:0: enabling power on all ports
uhci-hcd 0000:02:01.1: VIA Technologies, In USB (#2)
uhci-hcd 0000:02:01.1: irq 18, io base 0000dcc0
uhci-hcd 0000:02:01.1: new USB bus registered, assigned bus number 2
drivers/usb/host/uhci-hcd.c: detected 2 ports
uhci-hcd 0000:02:01.1: root hub device address 1
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: VIA Technologies, In USB (#2)
usb usb2: Manufacturer: Linux 2.5.74 uhci-hcd
usb usb2: SerialNumber: 0000:02:01.1
usb usb2: usb_new_device - registering interface 2-0:0
hub 2-0:0: usb_device_probe
hub 2-0:0: usb_device_probe - got id
hub 2-0:0: USB hub found
hub 2-0:0: 2 ports detected
hub 2-0:0: standalone hub
hub 2-0:0: ganged power switching
hub 2-0:0: global over-current protection
hub 2-0:0: Port indicators are not supported
hub 2-0:0: power on to power good time: 2ms
hub 2-0:0: hub controller current requirement: 0mA
hub 2-0:0: local power source is good
hub 2-0:0: no over-current condition exists
hub 2-0:0: enabling power on all ports
uhci-hcd 0000:02:02.0: VIA Technologies, In USB (#3)
uhci-hcd 0000:02:02.0: irq 18, io base 0000dca0
uhci-hcd 0000:02:02.0: new USB bus registered, assigned bus number 3
drivers/usb/host/uhci-hcd.c: detected 2 ports
uhci-hcd 0000:02:02.0: root hub device address 1
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: VIA Technologies, In USB (#3)
usb usb3: Manufacturer: Linux 2.5.74 uhci-hcd
usb usb3: SerialNumber: 0000:02:02.0
usb usb3: usb_new_device - registering interface 3-0:0
hub 3-0:0: usb_device_probe
hub 3-0:0: usb_device_probe - got id
hub 3-0:0: USB hub found
hub 3-0:0: 2 ports detected
hub 3-0:0: standalone hub
hub 3-0:0: ganged power switching
hub 3-0:0: global over-current protection
hub 3-0:0: Port indicators are not supported
hub 3-0:0: power on to power good time: 2ms
hub 3-0:0: hub controller current requirement: 0mA
hub 3-0:0: local power source is good
hub 3-0:0: no over-current condition exists
hub 3-0:0: enabling power on all ports
uhci-hcd 0000:02:02.1: VIA Technologies, In USB (#4)
uhci-hcd 0000:02:02.1: irq 17, io base 0000dc80
uhci-hcd 0000:02:02.1: new USB bus registered, assigned bus number 4
drivers/usb/host/uhci-hcd.c: detected 2 ports
uhci-hcd 0000:02:02.1: root hub device address 1
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: VIA Technologies, In USB (#4)
usb usb4: Manufacturer: Linux 2.5.74 uhci-hcd
usb usb4: SerialNumber: 0000:02:02.1
usb usb4: usb_new_device - registering interface 4-0:0
hub 4-0:0: usb_device_probe
hub 4-0:0: usb_device_probe - got id
hub 4-0:0: USB hub found
hub 4-0:0: 2 ports detected
hub 4-0:0: standalone hub
hub 4-0:0: ganged power switching
hub 4-0:0: global over-current protection
hub 4-0:0: Port indicators are not supported
hub 4-0:0: power on to power good time: 2ms
hub 4-0:0: hub controller current requirement: 0mA
hub 4-0:0: local power source is good
hub 4-0:0: no over-current condition exists
hub 4-0:0: enabling power on all ports
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
hub 1-0:0: port 1, status 100, change 3, 12 Mb/s
hub 1-0:0: port 2, status 300, change 3, 1.5 Mb/s
hub 2-0:0: port 1, status 100, change 3, 12 Mb/s
hub 2-0:0: port 2, status 100, change 3, 12 Mb/s
hub 3-0:0: port 1, status 301, change 3, 1.5 Mb/s
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hde1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hub 3-0:0: debounce: port 1: delay 100ms stable 4 status 0x301
hub 3-0:0: new USB device on port 1, assigned address 2
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Optical Mouse
usb 3-1: Manufacturer: Logitech
usb 3-1: usb_new_device - registering interface 3-1:0
hid 3-1:0: usb_device_probe
hid 3-1:0: usb_device_probe - got id
input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:02:02.0-1
hub 3-0:0: port 2, status 100, change 3, 12 Mb/s
hub 3-0:0: port 2 enable change, status 100
hub 2-0:0: port 1 enable change, status 100
hub 2-0:0: port 2 enable change, status 100
hub 1-0:0: port 1 enable change, status 100
hub 1-0:0: port 2 enable change, status 300
hub 4-0:0: port 1, status 100, change 3, 12 Mb/s
hub 4-0:0: port 2, status 100, change 3, 12 Mb/s
hub 4-0:0: port 1 enable change, status 100
hub 4-0:0: port 2 enable change, status 100
drivers/usb/host/uhci-hcd.c: dce0: suspend_hc
e1000: eth0 NIC Link is Up 100 Mbps Half Duplex
drivers/usb/host/uhci-hcd.c: dcc0: suspend_hc
drivers/usb/host/uhci-hcd.c: dc80: suspend_hc
ehci_hcd: block sizes: qh 128 qtd 96 itd 128 sitd 64
ehci_hcd 0000:02:01.2: VIA Technologies, In USB 2.0
ehci_hcd 0000:02:01.2: irq 16, pci mem e088ac00
ehci_hcd 0000:02:01.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:02:01.2: ehci_start hcs_params 0x2204 dbg=0 cc=2 pcc=2 ordered !ppc ports=4
ehci_hcd 0000:02:01.2: ehci_start hcc_params 0002 thresh 0 uframes 256/512/1024
ehci_hcd 0000:02:01.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:02:01.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
ehci_hcd 0000:02:01.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jun-13
ehci_hcd 0000:02:01.2: root hub device address 1
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: VIA Technologies, In USB 2.0
usb usb5: Manufacturer: Linux 2.5.74 ehci_hcd
usb usb5: SerialNumber: 0000:02:01.2
usb usb5: usb_new_device - registering interface 5-0:0
hub 5-0:0: usb_device_probe
hub 5-0:0: usb_device_probe - got id
hub 5-0:0: USB hub found
hub 5-0:0: 4 ports detected
hub 5-0:0: standalone hub
hub 5-0:0: ganged power switching
hub 5-0:0: individual port over-current protection
hub 5-0:0: Single TT
hub 5-0:0: TT requires at most 8 FS bit times
hub 5-0:0: Port indicators are not supported
hub 5-0:0: power on to power good time: 0ms
hub 5-0:0: hub controller current requirement: 0mA
hub 5-0:0: local power source is good
hub 5-0:0: no over-current condition exists
hub 5-0:0: enabling power on all ports
ehci_hcd 0000:02:02.2: VIA Technologies, In USB 2.0 (#2)
ehci_hcd 0000:02:02.2: irq 19, pci mem e088c800
ehci_hcd 0000:02:02.2: new USB bus registered, assigned bus number 6
ehci_hcd 0000:02:02.2: ehci_start hcs_params 0x2204 dbg=0 cc=2 pcc=2 ordered !ppc ports=4
ehci_hcd 0000:02:02.2: ehci_start hcc_params 0002 thresh 0 uframes 256/512/1024
ehci_hcd 0000:02:02.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:02:02.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
ehci_hcd 0000:02:02.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jun-13
ehci_hcd 0000:02:02.2: root hub device address 1
usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: VIA Technologies, In USB 2.0 (#2)
usb usb6: Manufacturer: Linux 2.5.74 ehci_hcd
usb usb6: SerialNumber: 0000:02:02.2
usb usb6: usb_new_device - registering interface 6-0:0
hub 6-0:0: usb_device_probe
hub 6-0:0: usb_device_probe - got id
hub 6-0:0: USB hub found
hub 6-0:0: 4 ports detected
hub 6-0:0: standalone hub
hub 6-0:0: ganged power switching
hub 6-0:0: individual port over-current protection
hub 6-0:0: Single TT
hub 6-0:0: TT requires at most 8 FS bit times
hub 6-0:0: Port indicators are not supported
hub 6-0:0: power on to power good time: 0ms
hub 6-0:0: hub controller current requirement: 0mA
hub 6-0:0: local power source is good
hub 6-0:0: no over-current condition exists
hub 6-0:0: enabling power on all ports
hub 3-0:0: port 1, status 300, change 3, 1.5 Mb/s
usb 3-1: USB disconnect, address 2
usb 3-1: unregistering interfaces
usb 3-1: hcd_unlink_urb df8a2400 fail -22
usb 3-1: hcd_unlink_urb df8a2380 fail -22
usb 3-1: unregistering device
ehci_hcd 0000:02:02.2: GetStatus port 1 status 001403 POWER sig=k  CSC CONNECT
hub 6-0:0: port 1, status 501, change 1, 480 Mb/s
hub 6-0:0: debounce: port 1: delay 100ms stable 4 status 0x501
ehci_hcd 0000:02:02.2: port 1 low speed --> companion
ehci_hcd 0000:02:02.2: GetStatus port 1 status 003402 POWER OWNER sig=k  CSC
hub 3-0:0: port 1, status 301, change 3, 1.5 Mb/s
hub 3-0:0: debounce: port 1: delay 100ms stable 4 status 0x301
hub 3-0:0: new USB device on port 1, assigned address 3
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Optical Mouse
usb 3-1: Manufacturer: Logitech
usb 3-1: usb_new_device - registering interface 3-1:0
hid 3-1:0: usb_device_probe
hid 3-1:0: usb_device_probe - got id
input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:02:02.0-1
Unable to handle kernel NULL pointer dereference at virtual address 00000000
 printing eip:
c0136704
*pde = 00000000
Oops: 0000 [#1]
CPU:    0
EIP:    0060:[<c0136704>]    Not tainted
EFLAGS: 00010006
eax: 00a00000   ebx: ddadc7c0   ecx: dc7e9990   edx: 00000000
esi: 00000100   edi: 00000206   ebp: dc7e9990   esp: dc7ebf44
ds: 007b   es: 007b   ss: 0068
Process netstat (pid: 561, threadinfo=dc7ea000 task=dc8f2180)
Stack: 00000000 00000080 ddadc7c0 dca6af00 dc7e9990 c01664ae 00000100 dca6af00 
       dca6af00 c0166489 dff63f40 c014a7a7 dc7e9990 dca6af00 dca6c780 dca6af00 
       dca6af00 dcfab580 00000000 c0148f09 dca6af00 dcfab580 dcfab580 dca6af00 
Call Trace: [<c01664ae>]  [<c0166489>]  [<c014a7a7>]  [<c0148f09>]  [<c0148fa3>]  [<c0108ec3>] 
Code: 8b 1a 8b 03 3b 43 04 73 19 89 74 83 10 83 03 01 57 9d 8b 5c 
 <1>Unable to handle kernel NULL pointer dereference at virtual address 00000000
 printing eip:
c0136704
*pde = 00000000
Oops: 0000 [#2]
CPU:    0
EIP:    0060:[<c0136704>]    Not tainted
EFLAGS: 00010006
eax: 00a00000   ebx: ddadcf00   ecx: dc7e9990   edx: 00000000
esi: 00000100   edi: 00000206   ebp: dc7e9990   esp: dd51df44
ds: 007b   es: 007b   ss: 0068
Process netstat (pid: 584, threadinfo=dd51c000 task=dc8f2180)
Stack: 00000000 00000080 ddadcf00 dca6a480 dc7e9990 c01664ae 00000100 dca6a480 
       dca6a480 c0166489 dff63f40 c014a7a7 dc7e9990 dca6a480 dca6c780 dca6a480 
       dca6a480 dcfab380 00000000 c0148f09 dca6a480 dcfab380 dcfab380 dca6a480 
Call Trace: [<c01664ae>]  [<c0166489>]  [<c014a7a7>]  [<c0148f09>]  [<c0148fa3>]  [<c0108ec3>] 
Code: 8b 1a 8b 03 3b 43 04 73 19 89 74 83 10 83 03 01 57 9d 8b 5c 

[-- Attachment #3: ksym.oops --]
[-- Type: application/octet-stream, Size: 5157 bytes --]

ksymoops 2.4.8 on i686 2.5.74.  Options used
     -V (default)
     -k /proc/ksyms (default)
     -l /proc/modules (default)
     -o /lib/modules/2.5.74/ (default)
     -m /boot/System.map-2.5.74 (default)

Warning: You did not tell me where to find symbol information.  I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc.  ksymoops -h explains the options.

Error (regular_file): read_ksyms stat /proc/ksyms failed
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Machine check exception polling timer started.
e1000: eth0 NIC Link is Up 100 Mbps Half Duplex
Unable to handle kernel NULL pointer dereference at virtual address 00000000
c0136704
*pde = 00000000
Oops: 0000 [#1]
CPU:    0
EIP:    0060:[<c0136704>]    Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010006
eax: 00a00000   ebx: ddadc7c0   ecx: dc7e9990   edx: 00000000
esi: 00000100   edi: 00000206   ebp: dc7e9990   esp: dc7ebf44
ds: 007b   es: 007b   ss: 0068
Stack: 00000000 00000080 ddadc7c0 dca6af00 dc7e9990 c01664ae 00000100 dca6af00 
       dca6af00 c0166489 dff63f40 c014a7a7 dc7e9990 dca6af00 dca6c780 dca6af00 
       dca6af00 dcfab580 00000000 c0148f09 dca6af00 dcfab580 dcfab580 dca6af00 
Call Trace: [<c01664ae>]  [<c0166489>]  [<c014a7a7>]  [<c0148f09>]  [<c0148fa3>]  [<c0108ec3>] 
Code: 8b 1a 8b 03 3b 43 04 73 19 89 74 83 10 83 03 01 57 9d 8b 5c 

>>EIP; c0136704 <kfree+30/62>   <=====

>>eax; 00a00000 <__crc_flush_scheduled_work+1fe988/58d288>
>>ebx; ddadc7c0 <__crc_ext2_xattr_get+5fb00a/691b31>
>>ecx; dc7e9990 <__crc_wait_for_ready+35e12/11edac>
>>ebp; dc7e9990 <__crc_wait_for_ready+35e12/11edac>
>>esp; dc7ebf44 <__crc_wait_for_ready+383c6/11edac>

Trace; c01664ae <seq_release_private+25/48>
Trace; c0166489 <seq_release_private+0/48>
Trace; c014a7a7 <__fput+10c/111>
Trace; c0148f09 <filp_close+98/cf>
Trace; c0148fa3 <sys_close+63/96>
Trace; c0108ec3 <syscall_call+7/b>

Code;  c0136704 <kfree+30/62>
00000000 <_EIP>:
Code;  c0136704 <kfree+30/62>   <=====
   0:   8b 1a                     mov    (%edx),%ebx   <=====
Code;  c0136706 <kfree+32/62>
   2:   8b 03                     mov    (%ebx),%eax
Code;  c0136708 <kfree+34/62>
   4:   3b 43 04                  cmp    0x4(%ebx),%eax
Code;  c013670b <kfree+37/62>
   7:   73 19                     jae    22 <_EIP+0x22>
Code;  c013670d <kfree+39/62>
   9:   89 74 83 10               mov    %esi,0x10(%ebx,%eax,4)
Code;  c0136711 <kfree+3d/62>
   d:   83 03 01                  addl   $0x1,(%ebx)
Code;  c0136714 <kfree+40/62>
  10:   57                        push   %edi
Code;  c0136715 <kfree+41/62>
  11:   9d                        popf   
Code;  c0136716 <kfree+42/62>
  12:   8b 5c 00 00               mov    0x0(%eax,%eax,1),%ebx

 <1>Unable to handle kernel NULL pointer dereference at virtual address 00000000
c0136704
*pde = 00000000
Oops: 0000 [#2]
CPU:    0
EIP:    0060:[<c0136704>]    Not tainted
EFLAGS: 00010006
eax: 00a00000   ebx: ddadcf00   ecx: dc7e9990   edx: 00000000
esi: 00000100   edi: 00000206   ebp: dc7e9990   esp: dd51df44
ds: 007b   es: 007b   ss: 0068
Stack: 00000000 00000080 ddadcf00 dca6a480 dc7e9990 c01664ae 00000100 dca6a480 
       dca6a480 c0166489 dff63f40 c014a7a7 dc7e9990 dca6a480 dca6c780 dca6a480 
       dca6a480 dcfab380 00000000 c0148f09 dca6a480 dcfab380 dcfab380 dca6a480 
Call Trace: [<c01664ae>]  [<c0166489>]  [<c014a7a7>]  [<c0148f09>]  [<c0148fa3>]  [<c0108ec3>] 
Code: 8b 1a 8b 03 3b 43 04 73 19 89 74 83 10 83 03 01 57 9d 8b 5c 

>>EIP; c0136704 <kfree+30/62>   <=====

>>eax; 00a00000 <__crc_flush_scheduled_work+1fe988/58d288>
>>ebx; ddadcf00 <__crc_ext2_xattr_get+5fb74a/691b31>
>>ecx; dc7e9990 <__crc_wait_for_ready+35e12/11edac>
>>ebp; dc7e9990 <__crc_wait_for_ready+35e12/11edac>
>>esp; dd51df44 <__crc_ext2_xattr_get+3c78e/691b31>

Trace; c01664ae <seq_release_private+25/48>
Trace; c0166489 <seq_release_private+0/48>
Trace; c014a7a7 <__fput+10c/111>
Trace; c0148f09 <filp_close+98/cf>
Trace; c0148fa3 <sys_close+63/96>
Trace; c0108ec3 <syscall_call+7/b>

Code;  c0136704 <kfree+30/62>
00000000 <_EIP>:
Code;  c0136704 <kfree+30/62>   <=====
   0:   8b 1a                     mov    (%edx),%ebx   <=====
Code;  c0136706 <kfree+32/62>
   2:   8b 03                     mov    (%ebx),%eax
Code;  c0136708 <kfree+34/62>
   4:   3b 43 04                  cmp    0x4(%ebx),%eax
Code;  c013670b <kfree+37/62>
   7:   73 19                     jae    22 <_EIP+0x22>
Code;  c013670d <kfree+39/62>
   9:   89 74 83 10               mov    %esi,0x10(%ebx,%eax,4)
Code;  c0136711 <kfree+3d/62>
   d:   83 03 01                  addl   $0x1,(%ebx)
Code;  c0136714 <kfree+40/62>
  10:   57                        push   %edi
Code;  c0136715 <kfree+41/62>
  11:   9d                        popf   
Code;  c0136716 <kfree+42/62>
  12:   8b 5c 00 00               mov    0x0(%eax,%eax,1),%ebx

1 warning and 1 error issued.  Results may not be reliable.

[-- Attachment #4: config --]
[-- Type: application/octet-stream, Size: 30726 bytes --]

#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_EMBEDDED is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y

#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set

#
# ACPI Support
#
# CONFIG_ACPI is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG is not set

#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y

#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_OTHER=y
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_NAMES=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_LBD=y

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y

#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_IDE_TASK_IOCTL=y
# CONFIG_IDE_TASKFILE_IO is not set

#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_GENERIC is not set
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
CONFIG_BLK_DEV_HPT34X=m
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_BLK_DEV_PDC202XX_NEW=m
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_SVWKS=y
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_BLK_DEV_PDC202XX=y
CONFIG_BLK_DEV_IDE_MODES=y

#
# SCSI device support
#
CONFIG_SCSI=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_PROBE_EISA_VL is not set
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
CONFIG_SCSI_MEGARAID=m
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_SYM53C8XX=m
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
CONFIG_MD_MULTIPATH=m
CONFIG_BLK_DEV_DM=m

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_INET_ECN=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
# CONFIG_IP_NF_MATCH_RECENT is not set
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
# CONFIG_IP_NF_ARP_MANGLE is not set
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_COMPAT_IPFWADM=m
# CONFIG_IPV6 is not set
# CONFIG_XFRM_USER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_CSZ=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_POLICE=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_ETHERTAP=m
# CONFIG_NET_SB1000 is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_TC35815 is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=m
# CONFIG_EEPRO100_PIO is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
CONFIG_NATSEMI=m
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
# CONFIG_E1000_NAPI is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=m

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set

#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
CONFIG_NET_WIRELESS=y

#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m

#
# Old SIR device drivers
#
# CONFIG_IRTTY_OLD is not set
CONFIG_IRPORT_SIR=m

#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set

#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_OLD=m
CONFIG_TOSHIBA_FIR=m
# CONFIG_SMC_IRCC_OLD is not set
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m

#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_UINPUT=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_PHILIPSPAR is not set
CONFIG_I2C_ELV=m
CONFIG_I2C_VELLEMAN=m
CONFIG_SCx200_ACB=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ELEKTOR=m
CONFIG_I2C_CHARDEV=m

#
# I2C Hardware Sensors Mainboard support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISA=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIAPRO=m

#
# I2C Hardware Sensors Chip support
#
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
CONFIG_I2C_SENSOR=m

#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_KCS=m
CONFIG_IPMI_WATCHDOG=m

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_SOFT_WATCHDOG=m
# CONFIG_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_PCWATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
CONFIG_I810_TCO=m
# CONFIG_MIXCOMWD is not set
# CONFIG_SCx200_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_AMD7XX_TCO is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_HW_RANDOM=y
CONFIG_NVRAM=m
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
CONFIG_AGP_AMD=m
# CONFIG_AGP_AMD_8151 is not set
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
CONFIG_DRM=y
CONFIG_DRM_TDFX=m
# CONFIG_DRM_GAMMA is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#
CONFIG_VIDEO_PROC_FS=y

#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
CONFIG_INTERMEZZO_FS=m
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set

#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=m
CONFIG_USB_DEBUG=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set

#
# USB Network adaptors
#
# CONFIG_USB_AX8817X is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set

#
# Bluetooth support
#
# CONFIG_BT is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_KALLSYMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=m
CONFIG_SECURITY_ROOTPLUG=m

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_TEST=m

#
# Library routines
#
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_X86_BIOS_REBOOT=y

^ permalink raw reply	[flat|nested] 3+ messages in thread