[PATCH v2 0/2] KVM: Fix race between reboot and hardware enabling

[PATCH v2 0/2] KVM: Fix race between reboot and hardware enabling

[Sean Christopherson]

Fix a bug where enabling hardware virtualization can race with a forced
reboot, e.g. `reboot -f`, and result in virt hardware being enabled when
the reboot is attempted, and thus hanging the reboot.

Found by inspection, confirmed by hacking the reboot flow to wait until
KVM loads (the problematic window is ridiculously small).

Fully tested only on x86, compile tested on other architectures.

v2:
 - Rename KVM's callback to kvm_shutdown() to match the hook. [Marc]
 - Don't add a spurious newline. [Marc]

v1: https://lore.kernel.org/all/20230310221414.811690-1-seanjc@google.com

Sean Christopherson (2):
  KVM: Use syscore_ops instead of reboot_notifier to hook
    restart/shutdown
  KVM: Don't enable hardware after a restart/shutdown is initiated

 virt/kvm/kvm_main.c | 43 +++++++++++++++++++++++++++----------------
 1 file changed, 27 insertions(+), 16 deletions(-)


base-commit: b3c98052d46948a8d65d2778c7f306ff38366aac
-- 
2.40.1.606.ga4b1b128d6-goog

[PATCH v2 1/2] KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown

[Sean Christopherson]

Use syscore_ops.shutdown to disable hardware virtualization during a
reboot instead of using the dedicated reboot_notifier so that KVM disables
virtualization _after_ system_state has been updated.  This will allow
fixing a race in KVM's handling of a forced reboot where KVM can end up
enabling hardware virtualization between kernel_restart_prepare() and
machine_restart().

Rename KVM's hook to match the syscore op to avoid any possible confusion
from wiring up a "reboot" helper to a "shutdown" hook (neither "shutdown
nor "reboot" is completely accurate as the hook handles both).

Opportunistically rewrite kvm_shutdown()'s comment to make it less VMX
specific, and to explain why kvm_rebooting exists.

Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: kvmarm@lists.linux.dev
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: kvm-riscv@lists.infradead.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
 virt/kvm/kvm_main.c | 26 +++++++++++---------------
 1 file changed, 11 insertions(+), 15 deletions(-)

diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index d1abb331ea68..e771b6a013c9 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -5211,26 +5211,24 @@ static int hardware_enable_all(void)
 	return r;
 }
 
-static int kvm_reboot(struct notifier_block *notifier, unsigned long val,
-		      void *v)
+static void kvm_shutdown(void)
 {
 	/*
-	 * Some (well, at least mine) BIOSes hang on reboot if
-	 * in vmx root mode.
-	 *
-	 * And Intel TXT required VMX off for all cpu when system shutdown.
+	 * Disable hardware virtualization and set kvm_rebooting to indicate
+	 * that KVM has asynchronously disabled hardware virtualization, i.e.
+	 * that relevant errors and exceptions aren't entirely unexpected.
+	 * Some flavors of hardware virtualization need to be disabled before
+	 * transferring control to firmware (to perform shutdown/reboot), e.g.
+	 * on x86, virtualization can block INIT interrupts, which are used by
+	 * firmware to pull APs back under firmware control.  Note, this path
+	 * is used for both shutdown and reboot scenarios, i.e. neither name is
+	 * 100% comprehensive.
 	 */
 	pr_info("kvm: exiting hardware virtualization\n");
 	kvm_rebooting = true;
 	on_each_cpu(hardware_disable_nolock, NULL, 1);
-	return NOTIFY_OK;
 }
 
-static struct notifier_block kvm_reboot_notifier = {
-	.notifier_call = kvm_reboot,
-	.priority = 0,
-};
-
 static int kvm_suspend(void)
 {
 	/*
@@ -5261,6 +5259,7 @@ static void kvm_resume(void)
 static struct syscore_ops kvm_syscore_ops = {
 	.suspend = kvm_suspend,
 	.resume = kvm_resume,
+	.shutdown = kvm_shutdown,
 };
 #else /* CONFIG_KVM_GENERIC_HARDWARE_ENABLING */
 static int hardware_enable_all(void)
@@ -5965,7 +5964,6 @@ int kvm_init(unsigned vcpu_size, unsigned vcpu_align, struct module *module)
 	if (r)
 		return r;
 
-	register_reboot_notifier(&kvm_reboot_notifier);
 	register_syscore_ops(&kvm_syscore_ops);
 #endif
 
@@ -6037,7 +6035,6 @@ int kvm_init(unsigned vcpu_size, unsigned vcpu_align, struct module *module)
 err_vcpu_cache:
 #ifdef CONFIG_KVM_GENERIC_HARDWARE_ENABLING
 	unregister_syscore_ops(&kvm_syscore_ops);
-	unregister_reboot_notifier(&kvm_reboot_notifier);
 	cpuhp_remove_state_nocalls(CPUHP_AP_KVM_ONLINE);
 #endif
 	return r;
@@ -6063,7 +6060,6 @@ void kvm_exit(void)
 	kvm_async_pf_deinit();
 #ifdef CONFIG_KVM_GENERIC_HARDWARE_ENABLING
 	unregister_syscore_ops(&kvm_syscore_ops);
-	unregister_reboot_notifier(&kvm_reboot_notifier);
 	cpuhp_remove_state_nocalls(CPUHP_AP_KVM_ONLINE);
 #endif
 	kvm_irqfd_exit();
-- 
2.40.1.606.ga4b1b128d6-goog

[PATCH v2 2/2] KVM: Don't enable hardware after a restart/shutdown is initiated

[Sean Christopherson]

Reject hardware enabling, i.e. VM creation, if a restart/shutdown has
been initiated to avoid re-enabling hardware between kvm_reboot() and
machine_{halt,power_off,restart}().  The restart case is especially
problematic (for x86) as enabling VMX (or clearing GIF in KVM_RUN on
SVM) blocks INIT, which results in the restart/reboot hanging as BIOS
is unable to wake and rendezvous with APs.

Note, this bug, and the original issue that motivated the addition of
kvm_reboot(), is effectively limited to a forced reboot, e.g. `reboot -f`.
In a "normal" reboot, userspace will gracefully teardown userspace before
triggering the kernel reboot (modulo bugs, errors, etc), i.e. any process
that might do ioctl(KVM_CREATE_VM) is long gone.

Fixes: 8e1c18157d87 ("KVM: VMX: Disable VMX when system shutdown")
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
 virt/kvm/kvm_main.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index e771b6a013c9..cc36a7fc8a86 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -5182,7 +5182,20 @@ static void hardware_disable_all(void)
 static int hardware_enable_all(void)
 {
 	atomic_t failed = ATOMIC_INIT(0);
-	int r = 0;
+	int r;
+
+	/*
+	 * Do not enable hardware virtualization if the system is going down.
+	 * If userspace initiated a forced reboot, e.g. reboot -f, then it's
+	 * possible for an in-flight KVM_CREATE_VM to trigger hardware enabling
+	 * after kvm_reboot() is called.  Note, this relies on system_state
+	 * being set _before_ kvm_reboot(), which is why KVM uses a syscore ops
+	 * hook instead of registering a dedicated reboot notifier (the latter
+	 * runs before system_state is updated).
+	 */
+	if (system_state == SYSTEM_HALT || system_state == SYSTEM_POWER_OFF ||
+	    system_state == SYSTEM_RESTART)
+		return -EBUSY;
 
 	/*
 	 * When onlining a CPU, cpu_online_mask is set before kvm_online_cpu()
@@ -5195,6 +5208,8 @@ static int hardware_enable_all(void)
 	cpus_read_lock();
 	mutex_lock(&kvm_lock);
 
+	r = 0;
+
 	kvm_usage_count++;
 	if (kvm_usage_count == 1) {
 		on_each_cpu(hardware_enable_nolock, &failed, 1);
-- 
2.40.1.606.ga4b1b128d6-goog

Re: [PATCH v2 0/2] KVM: Fix race between reboot and hardware enabling

[Marc Zyngier]

On Sat, 13 May 2023 00:31:25 +0100,
Sean Christopherson <seanjc@google.com> wrote:
> 
> Fix a bug where enabling hardware virtualization can race with a forced
> reboot, e.g. `reboot -f`, and result in virt hardware being enabled when
> the reboot is attempted, and thus hanging the reboot.
> 
> Found by inspection, confirmed by hacking the reboot flow to wait until
> KVM loads (the problematic window is ridiculously small).
> 
> Fully tested only on x86, compile tested on other architectures.
> 
> v2:
>  - Rename KVM's callback to kvm_shutdown() to match the hook. [Marc]
>  - Don't add a spurious newline. [Marc]
> 
> v1: https://lore.kernel.org/all/20230310221414.811690-1-seanjc@google.com
> 
> Sean Christopherson (2):
>   KVM: Use syscore_ops instead of reboot_notifier to hook
>     restart/shutdown
>   KVM: Don't enable hardware after a restart/shutdown is initiated
> 
>  virt/kvm/kvm_main.c | 43 +++++++++++++++++++++++++++----------------
>  1 file changed, 27 insertions(+), 16 deletions(-)

Acked-by: Marc Zyngier <maz@kernel.org>

	M.

-- 
Without deviation from the norm, progress is not possible.

Re: [PATCH v2 0/2] KVM: Fix race between reboot and hardware enabling

[Paolo Bonzini]

On 5/13/23 01:31, Sean Christopherson wrote:
> Fix a bug where enabling hardware virtualization can race with a forced
> reboot, e.g. `reboot -f`, and result in virt hardware being enabled when
> the reboot is attempted, and thus hanging the reboot.
> 
> Found by inspection, confirmed by hacking the reboot flow to wait until
> KVM loads (the problematic window is ridiculously small).
> 
> Fully tested only on x86, compile tested on other architectures.
> 
> v2:
>   - Rename KVM's callback to kvm_shutdown() to match the hook. [Marc]
>   - Don't add a spurious newline. [Marc]
> 
> v1: https://lore.kernel.org/all/20230310221414.811690-1-seanjc@google.com
> 
> Sean Christopherson (2):
>    KVM: Use syscore_ops instead of reboot_notifier to hook
>      restart/shutdown
>    KVM: Don't enable hardware after a restart/shutdown is initiated
> 
>   virt/kvm/kvm_main.c | 43 +++++++++++++++++++++++++++----------------
>   1 file changed, 27 insertions(+), 16 deletions(-)
> 
> 
> base-commit: b3c98052d46948a8d65d2778c7f306ff38366aac

Queued, thanks.

Paolo

Re: [PATCH v2 1/2] KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown

[Gowans, James]

Hi Sean,

Blast from the past but I've just been bitten by this patch when
rebasing across v6.4.

On Fri, 2023-05-12 at 16:31 -0700, Sean Christopherson wrote:
> Use syscore_ops.shutdown to disable hardware virtualization during a
> reboot instead of using the dedicated reboot_notifier so that KVM disables
> virtualization _after_ system_state has been updated.  This will allow
> fixing a race in KVM's handling of a forced reboot where KVM can end up
> enabling hardware virtualization between kernel_restart_prepare() and
> machine_restart().

The issue is that, AFAICT, the syscore_ops.shutdown are not called when
doing a kexec. Reboot notifiers are called across kexec via:

kernel_kexec
  kernel_restart_prepare
    blocking_notifier_call_chain
      kvm_reboot

So after this patch, KVM is not shutdown during kexec; if hardware virt
mode is enabled then the kexec hangs in exactly the same manner as you
describe with the reboot.

Some specific shutdown callbacks, for example IOMMU, HPET, IRQ, etc are
called in native_machine_shutdown, but KVM is not one of these.

Thoughts on possible ways to fix this:
a) go back to reboot notifiers
b) get kexec to call syscore_shutdown() to invoke all of these callbacks
c) Add a KVM-specific callback to native_machine_shutdown(); we only
need this for Intel x86, right?

My slight preference is towards adding syscore_shutdown() to kexec, but
I'm not sure that's feasible. Adding kexec maintainers for input.

JG

Re: [PATCH v2 1/2] KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown

[Eric W. Biederman]

"Gowans, James" <jgowans@amazon.com> writes:

> Hi Sean,
>
> Blast from the past but I've just been bitten by this patch when
> rebasing across v6.4.
>
> On Fri, 2023-05-12 at 16:31 -0700, Sean Christopherson wrote:
>> Use syscore_ops.shutdown to disable hardware virtualization during a
>> reboot instead of using the dedicated reboot_notifier so that KVM disables
>> virtualization _after_ system_state has been updated.  This will allow
>> fixing a race in KVM's handling of a forced reboot where KVM can end up
>> enabling hardware virtualization between kernel_restart_prepare() and
>> machine_restart().
>
> The issue is that, AFAICT, the syscore_ops.shutdown are not called when
> doing a kexec. Reboot notifiers are called across kexec via:
>
> kernel_kexec
>   kernel_restart_prepare
>     blocking_notifier_call_chain
>       kvm_reboot
>
> So after this patch, KVM is not shutdown during kexec; if hardware virt
> mode is enabled then the kexec hangs in exactly the same manner as you
> describe with the reboot.

kernel_restart_prepare calls device_shutdown.  Which should call all
of the shutdown operations.  This has been the way the code has been
structured since December 2005.

> Some specific shutdown callbacks, for example IOMMU, HPET, IRQ, etc are
> called in native_machine_shutdown, but KVM is not one of these.
>
> Thoughts on possible ways to fix this:
> a) go back to reboot notifiers
> b) get kexec to call syscore_shutdown() to invoke all of these callbacks
> c) Add a KVM-specific callback to native_machine_shutdown(); we only
> need this for Intel x86, right?
>
> My slight preference is towards adding syscore_shutdown() to kexec, but
> I'm not sure that's feasible. Adding kexec maintainers for input.

Why isn't device_suthdown calling syscore_shutdown?

What problem are you running into with your rebase that worked with
reboot notifiers that is not working with syscore_shutdown?

Eric

Re: [PATCH v2 1/2] KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown

[Gowans, James]

On Sat, 2023-12-09 at 22:53 -0600, Eric W. Biederman wrote:
> > On Fri, 2023-05-12 at 16:31 -0700, Sean Christopherson wrote:
> > > Use syscore_ops.shutdown to disable hardware virtualization during a
> > > reboot instead of using the dedicated reboot_notifier so that KVM disables
> > > virtualization _after_ system_state has been updated.  This will allow
> > > fixing a race in KVM's handling of a forced reboot where KVM can end up
> > > enabling hardware virtualization between kernel_restart_prepare() and
> > > machine_restart().
> > 
> > The issue is that, AFAICT, the syscore_ops.shutdown are not called when
> > doing a kexec. Reboot notifiers are called across kexec via:
> > 
> > kernel_kexec
> >    kernel_restart_prepare
> >      blocking_notifier_call_chain
> >        kvm_reboot
> > 
> > So after this patch, KVM is not shutdown during kexec; if hardware virt
> > mode is enabled then the kexec hangs in exactly the same manner as you
> > describe with the reboot.
> 
> kernel_restart_prepare calls device_shutdown.  Which should call all
> of the shutdown operations.  This has been the way the code has been
> structured since December 2005.

Yes, kernel_reset_prepare calls device_shutdown which calls
dev->driver->shutdown for each dev which has a driver. KVM, however, is
not a dev with a driver, hence doesn't have a dev->driver->shutdown
callback. So KVM is no-op'ed in device_shutdown.

KVM adds its shutdown callback to syscore_ops and expects to be shut
down that way.

> 
> > Some specific shutdown callbacks, for example IOMMU, HPET, IRQ, etc are
> > called in native_machine_shutdown, but KVM is not one of these.
> > 
> > Thoughts on possible ways to fix this:
> > a) go back to reboot notifiers
> > b) get kexec to call syscore_shutdown() to invoke all of these callbacks
> > c) Add a KVM-specific callback to native_machine_shutdown(); we only
> > need this for Intel x86, right?
> > 
> > My slight preference is towards adding syscore_shutdown() to kexec, but
> > I'm not sure that's feasible. Adding kexec maintainers for input.
> 
> Why isn't device_suthdown calling syscore_shutdown?

I'm not sure - that would indeed be one way to fix; adding a call to
syscore_shutdown() inside device_shutdown. We may need to clean up other
callers to not do their own syscore_shutdown and rather depend on
device_shutdown to do it all.

Would you support adding syscore_shutdown() to device_shutdown()?

> 
> What problem are you running into with your rebase that worked with
> reboot notifiers that is not working with syscore_shutdown?

Prior to this commit [1] which changed KVM from reboot notifiers to
syscore_ops, KVM's reboot notifier shutdown callback was invoked on
kexec via kernel_restart_prepare.

After this commit, KVM is not being shut down because currently the
kexec flow does not call syscore_shutdown.

JG


[1] https://github.com/torvalds/linux/commit/6735150b6997

Re: [PATCH v2 1/2] KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown

[Gowans, James]

On Mon, 2023-12-11 at 09:54 +0200, James Gowans wrote:
> > 
> > What problem are you running into with your rebase that worked with
> > reboot notifiers that is not working with syscore_shutdown?
> 
> Prior to this commit [1] which changed KVM from reboot notifiers to
> syscore_ops, KVM's reboot notifier shutdown callback was invoked on
> kexec via kernel_restart_prepare.
> 
> After this commit, KVM is not being shut down because currently the
> kexec flow does not call syscore_shutdown.

I think I missed what you're asking here; you're asking for a reproducer
for the specific failure? 

1. Launch a QEMU VM with -enable-kvm flag

2. Do an immediate (-f flag) kexec:
kexec -f --reuse-cmdline ./bzImage 

Somewhere after doing the RET to new kernel in the relocate_kernel asm
function the new kernel starts triple faulting; I can't exactly figure
out where but I think it has to do with the new kernel trying to modify
CR3 while the VMXE bit is still set in CR4 causing the triple fault.

If KVM has been shut down via the shutdown callback, or alternatively if
the QEMU process has actually been killed first (by not doing a -f exec)
then the VMXE bit is clear and the kexec goes smoothly.

So, TL;DR: kexec -f use to work with a KVM VM active, now it goes into a
triple fault crash.

JG

Re: [PATCH v2 1/2] KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown

[Sean Christopherson]

On Sat, Dec 09, 2023, James Gowans wrote:
> Hi Sean,
> 
> Blast from the past but I've just been bitten by this patch when
> rebasing across v6.4.
> 
> On Fri, 2023-05-12 at 16:31 -0700, Sean Christopherson wrote:
> > Use syscore_ops.shutdown to disable hardware virtualization during a
> > reboot instead of using the dedicated reboot_notifier so that KVM disables
> > virtualization _after_ system_state has been updated.  This will allow
> > fixing a race in KVM's handling of a forced reboot where KVM can end up
> > enabling hardware virtualization between kernel_restart_prepare() and
> > machine_restart().
> 
> The issue is that, AFAICT, the syscore_ops.shutdown are not called when
> doing a kexec. Reboot notifiers are called across kexec via:
> 
> kernel_kexec
>   kernel_restart_prepare
>     blocking_notifier_call_chain
>       kvm_reboot
> 
> So after this patch, KVM is not shutdown during kexec; if hardware virt
> mode is enabled then the kexec hangs in exactly the same manner as you
> describe with the reboot.
> 
> Some specific shutdown callbacks, for example IOMMU, HPET, IRQ, etc are
> called in native_machine_shutdown, but KVM is not one of these.
> 
> Thoughts on possible ways to fix this:
> a) go back to reboot notifiers
> b) get kexec to call syscore_shutdown() to invoke all of these callbacks
> c) Add a KVM-specific callback to native_machine_shutdown(); we only
> need this for Intel x86, right?

I don't like (c).  VMX is the most sensitive/problematic, e.g. the whole blocking
of INIT thing, but SVM can also run afoul of EFER.SVME being cleared, and KVM really 
should leave virtualization enabled across kexec(), even if leaving virtualization
enabled is relatively benign on other architectures.

One more option would be:

 d) Add another sycore hook, e.g. syscore_kexec() specifically for this path.

> My slight preference is towards adding syscore_shutdown() to kexec, but
> I'm not sure that's feasible. Adding kexec maintainers for input.

In a vacuum, that'd be my preference too.  It's the obvious choice IMO, e.g. the
kexec_image->preserve_context path does syscore_suspend() (and then resume(), so
it's not completely uncharted territory.

However, there's a rather big wrinkle in that not all of the existing .shutdown()
implementations are obviously ok to call during kexec.  Luckily, AFAICT there are
very few users of the syscore .shutdown hook, so it's at least feasible to go that
route.

x86's mce_syscore_shutdown() should be ok, and arguably is correct, e.g. I don't
see how leaving #MC reporting enabled across kexec can work.

ledtrig_cpu_syscore_shutdown() is also likely ok and arguably correct.

The interrupt controllers though?  x86 disables IRQs at the very beginning of
machine_kexec(), so it's likely fine.  But every other architecture?  No clue.
E.g. PPC's default_machine_kexec() sends IPIs to shutdown other CPUs, though I
have no idea if that can run afoul of any of the paths below.

        arch/powerpc/platforms/cell/spu_base.c  .shutdown = spu_shutdown,
        arch/x86/kernel/cpu/mce/core.c	        .shutdown = mce_syscore_shutdown,
        arch/x86/kernel/i8259.c                 .shutdown = i8259A_shutdown,
        drivers/irqchip/irq-i8259.c	        .shutdown = i8259A_shutdown,
        drivers/irqchip/irq-sun6i-r.c	        .shutdown = sun6i_r_intc_shutdown,
        drivers/leds/trigger/ledtrig-cpu.c	.shutdown = ledtrig_cpu_syscore_shutdown,
        drivers/power/reset/sc27xx-poweroff.c	.shutdown = sc27xx_poweroff_shutdown,
        kernel/irq/generic-chip.c	        .shutdown = irq_gc_shutdown,
        virt/kvm/kvm_main.c	                .shutdown = kvm_shutdown,

The whole thing is a bit of a mess.  E.g. x86 treats machine_shutdown() from
kexec pretty much the same as shutdown for reboot, but other architectures have
what appear to be unique paths for handling kexec.

FWIW, if we want to go with option (b), syscore_shutdown() hooks could use
kexec_in_progress to differentiate between "regular" shutdown/reboot and kexec.

Re: [PATCH v2 1/2] KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown

[Sean Christopherson]

On Mon, Dec 11, 2023, Sean Christopherson wrote:
> On Sat, Dec 09, 2023, James Gowans wrote:
> > Hi Sean,
> > 
> > Blast from the past but I've just been bitten by this patch when
> > rebasing across v6.4.
> > 
> > On Fri, 2023-05-12 at 16:31 -0700, Sean Christopherson wrote:
> > > Use syscore_ops.shutdown to disable hardware virtualization during a
> > > reboot instead of using the dedicated reboot_notifier so that KVM disables
> > > virtualization _after_ system_state has been updated.  This will allow
> > > fixing a race in KVM's handling of a forced reboot where KVM can end up
> > > enabling hardware virtualization between kernel_restart_prepare() and
> > > machine_restart().
> > 
> > The issue is that, AFAICT, the syscore_ops.shutdown are not called when
> > doing a kexec. Reboot notifiers are called across kexec via:
> > 
> > kernel_kexec
> >   kernel_restart_prepare
> >     blocking_notifier_call_chain
> >       kvm_reboot
> > 
> > So after this patch, KVM is not shutdown during kexec; if hardware virt
> > mode is enabled then the kexec hangs in exactly the same manner as you
> > describe with the reboot.
> > 
> > Some specific shutdown callbacks, for example IOMMU, HPET, IRQ, etc are
> > called in native_machine_shutdown, but KVM is not one of these.
> > 
> > Thoughts on possible ways to fix this:
> > a) go back to reboot notifiers
> > b) get kexec to call syscore_shutdown() to invoke all of these callbacks
> > c) Add a KVM-specific callback to native_machine_shutdown(); we only
> > need this for Intel x86, right?
> 
> I don't like (c).  VMX is the most sensitive/problematic, e.g. the whole blocking
> of INIT thing, but SVM can also run afoul of EFER.SVME being cleared, and KVM really 
> should leave virtualization enabled across kexec(), even if leaving virtualization

*shouldn't*

> enabled is relatively benign on other architectures.
> 
> One more option would be:
> 
>  d) Add another sycore hook, e.g. syscore_kexec() specifically for this path.
> 
> > My slight preference is towards adding syscore_shutdown() to kexec, but
> > I'm not sure that's feasible. Adding kexec maintainers for input.
> 
> In a vacuum, that'd be my preference too.  It's the obvious choice IMO, e.g. the
> kexec_image->preserve_context path does syscore_suspend() (and then resume(), so
> it's not completely uncharted territory.
> 
> However, there's a rather big wrinkle in that not all of the existing .shutdown()
> implementations are obviously ok to call during kexec.  Luckily, AFAICT there are
> very few users of the syscore .shutdown hook, so it's at least feasible to go that
> route.
> 
> x86's mce_syscore_shutdown() should be ok, and arguably is correct, e.g. I don't
> see how leaving #MC reporting enabled across kexec can work.
> 
> ledtrig_cpu_syscore_shutdown() is also likely ok and arguably correct.
> 
> The interrupt controllers though?  x86 disables IRQs at the very beginning of
> machine_kexec(), so it's likely fine.  But every other architecture?  No clue.
> E.g. PPC's default_machine_kexec() sends IPIs to shutdown other CPUs, though I
> have no idea if that can run afoul of any of the paths below.
> 
>         arch/powerpc/platforms/cell/spu_base.c  .shutdown = spu_shutdown,
>         arch/x86/kernel/cpu/mce/core.c	        .shutdown = mce_syscore_shutdown,
>         arch/x86/kernel/i8259.c                 .shutdown = i8259A_shutdown,
>         drivers/irqchip/irq-i8259.c	        .shutdown = i8259A_shutdown,
>         drivers/irqchip/irq-sun6i-r.c	        .shutdown = sun6i_r_intc_shutdown,
>         drivers/leds/trigger/ledtrig-cpu.c	.shutdown = ledtrig_cpu_syscore_shutdown,
>         drivers/power/reset/sc27xx-poweroff.c	.shutdown = sc27xx_poweroff_shutdown,
>         kernel/irq/generic-chip.c	        .shutdown = irq_gc_shutdown,
>         virt/kvm/kvm_main.c	                .shutdown = kvm_shutdown,
> 
> The whole thing is a bit of a mess.  E.g. x86 treats machine_shutdown() from
> kexec pretty much the same as shutdown for reboot, but other architectures have
> what appear to be unique paths for handling kexec.
> 
> FWIW, if we want to go with option (b), syscore_shutdown() hooks could use
> kexec_in_progress to differentiate between "regular" shutdown/reboot and kexec.

Re: [PATCH v2 1/2] KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown

[Gowans, James]

On Mon, 2023-12-11 at 09:34 -0800, Sean Christopherson wrote:
> On Sat, Dec 09, 2023, James Gowans wrote:
> > Thoughts on possible ways to fix this:
> > a) go back to reboot notifiers
> > b) get kexec to call syscore_shutdown() to invoke all of these callbacks
> > c) Add a KVM-specific callback to native_machine_shutdown(); we only
> > need this for Intel x86, right?
> 
> I don't like (c).  VMX is the most sensitive/problematic, e.g. the whole blocking
> of INIT thing, but SVM can also run afoul of EFER.SVME being cleared, and KVM really
> should leave virtualization enabled across kexec(), even if leaving virtualization
> enabled is relatively benign on other architectures.

Good to know. Agreed that clean shutdown in all cases is best and we
discard (c).
> 
> One more option would be:
> 
>  d) Add another sycore hook, e.g. syscore_kexec() specifically for this path.
> 
> > My slight preference is towards adding syscore_shutdown() to kexec, but
> > I'm not sure that's feasible. Adding kexec maintainers for input.
> 
> In a vacuum, that'd be my preference too.  It's the obvious choice IMO, e.g. the
> kexec_image->preserve_context path does syscore_suspend() (and then resume(), so
> it's not completely uncharted territory.
> 
> However, there's a rather big wrinkle in that not all of the existing .shutdown()
> implementations are obviously ok to call during kexec.  Luckily, AFAICT there are
> very few users of the syscore .shutdown hook, so it's at least feasible to go that
> route.
> 
> x86's mce_syscore_shutdown() should be ok, and arguably is correct, e.g. I don't
> see how leaving #MC reporting enabled across kexec can work.
> 
> ledtrig_cpu_syscore_shutdown() is also likely ok and arguably correct.

I like your observation here that we probably have other misses like MCE
which should be shut down too - that's a hint that adding
syscore_shutdown() to kexec is the way to go.

> 
> The interrupt controllers though?  x86 disables IRQs at the very beginning of
> machine_kexec(), so it's likely fine.  But every other architecture?  No clue.
> E.g. PPC's default_machine_kexec() sends IPIs to shutdown other CPUs, though I
> have no idea if that can run afoul of any of the paths below.
> 
>         arch/powerpc/platforms/cell/spu_base.c  .shutdown = spu_shutdown,
>         arch/x86/kernel/cpu/mce/core.c          .shutdown = mce_syscore_shutdown,
>         arch/x86/kernel/i8259.c                 .shutdown = i8259A_shutdown,
>         drivers/irqchip/irq-i8259.c             .shutdown = i8259A_shutdown,
>         drivers/irqchip/irq-sun6i-r.c           .shutdown = sun6i_r_intc_shutdown,
>         drivers/leds/trigger/ledtrig-cpu.c      .shutdown = ledtrig_cpu_syscore_shutdown,
>         drivers/power/reset/sc27xx-poweroff.c   .shutdown = sc27xx_poweroff_shutdown,
>         kernel/irq/generic-chip.c               .shutdown = irq_gc_shutdown,
>         virt/kvm/kvm_main.c                     .shutdown = kvm_shutdown,
> 
> The whole thing is a bit of a mess.  E.g. x86 treats machine_shutdown() from
> kexec pretty much the same as shutdown for reboot, but other architectures have
> what appear to be unique paths for handling kexec.
> 
> FWIW, if we want to go with option (b), syscore_shutdown() hooks could use
> kexec_in_progress to differentiate between "regular" shutdown/reboot and kexec.

Yeah, perhaps that's the best: add syscore_shutdown to kexec and get the
callers to handle both cases if necessary. We could get maintainers for
all of these drivers to sign off on the change and say whether they need
to differentiate between kexec and reboot.

Eric, what are your thoughts on this approach? I can try to whip up a
patch for this and add the maintainers for all of the drivers.

JG

Re: [PATCH v2 1/2] KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown

[Eric W. Biederman]

"Gowans, James" <jgowans@amazon.com> writes:

> On Mon, 2023-12-11 at 09:54 +0200, James Gowans wrote:
>> > 
>> > What problem are you running into with your rebase that worked with
>> > reboot notifiers that is not working with syscore_shutdown?
>> 
>> Prior to this commit [1] which changed KVM from reboot notifiers to
>> syscore_ops, KVM's reboot notifier shutdown callback was invoked on
>> kexec via kernel_restart_prepare.
>> 
>> After this commit, KVM is not being shut down because currently the
>> kexec flow does not call syscore_shutdown.
>
> I think I missed what you're asking here; you're asking for a reproducer
> for the specific failure? 
>
> 1. Launch a QEMU VM with -enable-kvm flag
>
> 2. Do an immediate (-f flag) kexec:
> kexec -f --reuse-cmdline ./bzImage 
>
> Somewhere after doing the RET to new kernel in the relocate_kernel asm
> function the new kernel starts triple faulting; I can't exactly figure
> out where but I think it has to do with the new kernel trying to modify
> CR3 while the VMXE bit is still set in CR4 causing the triple fault.
>
> If KVM has been shut down via the shutdown callback, or alternatively if
> the QEMU process has actually been killed first (by not doing a -f exec)
> then the VMXE bit is clear and the kexec goes smoothly.
>
> So, TL;DR: kexec -f use to work with a KVM VM active, now it goes into a
> triple fault crash.

You mentioned I rebase so I thought your were backporting kernel patches.
By rebase do you mean you porting your userspace to a newer kernel?


In any event I believe the bug with respect to kexec was introduced in
commit 6f389a8f1dd2 ("PM / reboot: call syscore_shutdown() after
disable_nonboot_cpus()").  That is where syscore_shutdown was removed
from kernel_restart_prepare().

At this point it looks like someone just needs to add the missing
syscore_shutdown call into kernel_kexec() right after
migrate_to_reboot_cpu() is called.

That said I am not seeing the reboot notifiers being called on the kexec
path either so your issue with kvm might be deeper.

Eric

Re: [PATCH v2 1/2] KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown

[Gowans, James]

On Mon, 2023-12-11 at 17:50 -0600, Eric W. Biederman wrote:
> "Gowans, James" <jgowans@amazon.com> writes:
> 
> > On Mon, 2023-12-11 at 09:54 +0200, James Gowans wrote:
> > > > 
> > > > What problem are you running into with your rebase that worked with
> > > > reboot notifiers that is not working with syscore_shutdown?
> > > 
> > > Prior to this commit [1] which changed KVM from reboot notifiers to
> > > syscore_ops, KVM's reboot notifier shutdown callback was invoked on
> > > kexec via kernel_restart_prepare.
> > > 
> > > After this commit, KVM is not being shut down because currently the
> > > kexec flow does not call syscore_shutdown.
> > 
> > I think I missed what you're asking here; you're asking for a reproducer
> > for the specific failure?
> > 
> > 1. Launch a QEMU VM with -enable-kvm flag
> > 
> > 2. Do an immediate (-f flag) kexec:
> > kexec -f --reuse-cmdline ./bzImage
> > 
> > Somewhere after doing the RET to new kernel in the relocate_kernel asm
> > function the new kernel starts triple faulting; I can't exactly figure
> > out where but I think it has to do with the new kernel trying to modify
> > CR3 while the VMXE bit is still set in CR4 causing the triple fault.
> > 
> > If KVM has been shut down via the shutdown callback, or alternatively if
> > the QEMU process has actually been killed first (by not doing a -f exec)
> > then the VMXE bit is clear and the kexec goes smoothly.
> > 
> > So, TL;DR: kexec -f use to work with a KVM VM active, now it goes into a
> > triple fault crash.
> 
> You mentioned I rebase so I thought your were backporting kernel patches.
> By rebase do you mean you porting your userspace to a newer kernel?

I've been working on some patches and when I rebased my work-in-progress
patches to latest master then kexec stopped working when KVM VMs exist.
Originally the WIP patches were based on an older stable version.

> 
> In any event I believe the bug with respect to kexec was introduced in
> commit 6f389a8f1dd2 ("PM / reboot: call syscore_shutdown() after
> disable_nonboot_cpus()").  That is where syscore_shutdown was removed
> from kernel_restart_prepare().
> 
> At this point it looks like someone just needs to add the missing
> syscore_shutdown call into kernel_kexec() right after
> migrate_to_reboot_cpu() is called.

Seems good and I'm happy to do that; one thing we need to check first:
are all CPUs online at that point? The commit message for
6f389a8f1dd2 ("PM / reboot: call syscore_shutdown() after disable_nonboot_cpus()")
speaks about: "one CPU on-line and interrupts disabled" when
syscore_shutdown is called. KVM's syscore shutdown hook does:

on_each_cpu(hardware_disable_nolock, NULL, 1);

... so that smells to me like it wants all the CPUs to be online at
kvm_shutdown point.

It's not clear to me:

1. Does hardware_disable_nolock actually need to be done on *every* CPU
or would the offlined ones be fine to ignore because they will be reset
and the VMXE bit will be cleared that way? With cooperative CPU handover
we probably do indeed want to do this on every CPU and not depend on
resetting.

2. Are CPUs actually offline at this point? When that commit was
authored there used to be a call to hardware_disable_nolock() but that's
not there anymore.

> 
> That said I am not seeing the reboot notifiers being called on the kexec
> path either so your issue with kvm might be deeper.

Previously it was called via:

kernel_kexec
  kernel_restart_prepare
    blocking_notifier_call_chain(&reboot_notifier_list, SYS_RESTART, cmd);
      kvm_shutdown

JG

Re: [PATCH v2 1/2] KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown

[Paolo Bonzini]

On Tue, Dec 12, 2023 at 9:51 AM Gowans, James <jgowans@amazon.com> wrote:
> 1. Does hardware_disable_nolock actually need to be done on *every* CPU
> or would the offlined ones be fine to ignore because they will be reset
> and the VMXE bit will be cleared that way? With cooperative CPU handover
> we probably do indeed want to do this on every CPU and not depend on
> resetting.

Offlined and onlined CPUs are handled via the CPU hotplug state machine,
which calls into kvm_online_cpu and kvm_offline_cpu.

Paolo

Re: [PATCH v2 1/2] KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown

[Gowans, James]

On Tue, 2023-12-12 at 10:50 +0200, James Gowans wrote:
> > 
> > In any event I believe the bug with respect to kexec was introduced in
> > commit 6f389a8f1dd2 ("PM / reboot: call syscore_shutdown() after
> > disable_nonboot_cpus()").  That is where syscore_shutdown was removed
> > from kernel_restart_prepare().
> > 
> > At this point it looks like someone just needs to add the missing
> > syscore_shutdown call into kernel_kexec() right after
> > migrate_to_reboot_cpu() is called.
> 
> Seems good and I'm happy to do that; one thing we need to check first:
> are all CPUs online at that point? The commit message for
> 6f389a8f1dd2 ("PM / reboot: call syscore_shutdown() after disable_nonboot_cpus()")
> speaks about: "one CPU on-line and interrupts disabled" when
> syscore_shutdown is called. KVM's syscore shutdown hook does:
> 
> on_each_cpu(hardware_disable_nolock, NULL, 1);
> 
> ... so that smells to me like it wants all the CPUs to be online at
> kvm_shutdown point.
> 
> It's not clear to me:
> 
> 1. Does hardware_disable_nolock actually need to be done on *every* CPU
> or would the offlined ones be fine to ignore because they will be reset
> and the VMXE bit will be cleared that way? With cooperative CPU handover
> we probably do indeed want to do this on every CPU and not depend on
> resetting.
> 
> 2. Are CPUs actually offline at this point? When that commit was
> authored there used to be a call to hardware_disable_nolock() but that's
> not there anymore.

I've sent out a patch:
https://lore.kernel.org/kexec/20231213064004.2419447-1-jgowans@amazon.com/T/#u

Let's continue the discussion there.

JG