* [PATCH v3 7/9] dt-bindings: serial: Add Milbeaut serial driver description
@ 2019-02-20 7:44 Sugaya Taichi
2019-02-22 18:38 ` Rob Herring
0 siblings, 1 reply; 3+ messages in thread
From: Sugaya Taichi @ 2019-02-20 7:44 UTC (permalink / raw)
To: linux-serial, devicetree, linux-kernel, linux-arm-kernel, soc
Cc: Greg Kroah-Hartman, Rob Herring, Mark Rutland, Takao Orito,
Kazuhiro Kasai, Shinji Kanematsu, Jassi Brar, Masami Hiramatsu,
Sugaya Taichi
Add DT bindings document for Milbeaut serial driver.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
---
.../devicetree/bindings/serial/milbeaut-uart.txt | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/serial/milbeaut-uart.txt
diff --git a/Documentation/devicetree/bindings/serial/milbeaut-uart.txt b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
new file mode 100644
index 0000000..3d2fb1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
@@ -0,0 +1,21 @@
+Socionext Milbeaut UART controller
+
+Required properties:
+- compatible: should be "socionext,milbeaut-usio-uart".
+- reg: offset and length of the register set for the device.
+- interrupts: two interrupts specifier.
+- interrupt-names: should be "rx", "tx".
+- clocks: phandle to the input clock.
+
+Optional properties:
+- auto-flow-control: flow control enable.
+
+Example:
+ usio1: usio_uart@1e700010 {
+ compatible = "socionext,milbeaut-usio-uart";
+ reg = <0x1e700010 0x10>;
+ interrupts = <0 141 0x4>, <0 149 0x4>;
+ interrupt-names = "rx", "tx";
+ clocks = <&clk 2>;
+ auto-flow-control;
+ };
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v3 7/9] dt-bindings: serial: Add Milbeaut serial driver description
2019-02-20 7:44 [PATCH v3 7/9] dt-bindings: serial: Add Milbeaut serial driver description Sugaya Taichi
@ 2019-02-22 18:38 ` Rob Herring
2019-02-25 12:13 ` Sugaya, Taichi
0 siblings, 1 reply; 3+ messages in thread
From: Rob Herring @ 2019-02-22 18:38 UTC (permalink / raw)
To: Sugaya Taichi
Cc: linux-serial, devicetree, linux-kernel, linux-arm-kernel, soc,
Greg Kroah-Hartman, Mark Rutland, Takao Orito, Kazuhiro Kasai,
Shinji Kanematsu, Jassi Brar, Masami Hiramatsu, Sugaya Taichi
On Wed, 20 Feb 2019 16:44:37 +0900, Sugaya Taichi wrote:
> Add DT bindings document for Milbeaut serial driver.
>
> Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
> ---
> .../devicetree/bindings/serial/milbeaut-uart.txt | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/serial/milbeaut-uart.txt
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v3 7/9] dt-bindings: serial: Add Milbeaut serial driver description
2019-02-22 18:38 ` Rob Herring
@ 2019-02-25 12:13 ` Sugaya, Taichi
0 siblings, 0 replies; 3+ messages in thread
From: Sugaya, Taichi @ 2019-02-25 12:13 UTC (permalink / raw)
To: Rob Herring
Cc: linux-serial, devicetree, linux-kernel, linux-arm-kernel, soc,
Greg Kroah-Hartman, Mark Rutland, Takao Orito, Kazuhiro Kasai,
Shinji Kanematsu, Jassi Brar, Masami Hiramatsu
Hi Rob,
On 2019/02/23 3:38, Rob Herring wrote:
> On Wed, 20 Feb 2019 16:44:37 +0900, Sugaya Taichi wrote:
>> Add DT bindings document for Milbeaut serial driver.
>>
>> Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
>> ---
>> .../devicetree/bindings/serial/milbeaut-uart.txt | 21 +++++++++++++++++++++
>> 1 file changed, 21 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/serial/milbeaut-uart.txt
>>
>
> Reviewed-by: Rob Herring <robh@kernel.org>
>
Thank you!
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-02-25 12:13 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-20 7:44 [PATCH v3 7/9] dt-bindings: serial: Add Milbeaut serial driver description Sugaya Taichi
2019-02-22 18:38 ` Rob Herring
2019-02-25 12:13 ` Sugaya, Taichi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).