* [PATCH v2 1/2] regulator: fan53880: Fix missing n_voltages setting
@ 2021-05-17 10:53 Axel Lin
2021-05-17 10:53 ` [PATCH v2 2/2] regulator: fan53880: Convert to use .probe_new Axel Lin
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Axel Lin @ 2021-05-17 10:53 UTC (permalink / raw)
To: Mark Brown; +Cc: Christoph Fritz, Liam Girdwood, linux-kernel, Axel Lin
Fixes: e6dea51e2d41 ("regulator: fan53880: Add initial support")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
v2: address Christoph' comment
drivers/regulator/fan53880.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/regulator/fan53880.c b/drivers/regulator/fan53880.c
index e83eb4fb1876..1684faf82ed2 100644
--- a/drivers/regulator/fan53880.c
+++ b/drivers/regulator/fan53880.c
@@ -51,6 +51,7 @@ static const struct regulator_ops fan53880_ops = {
REGULATOR_LINEAR_RANGE(800000, 0xf, 0x73, 25000), \
}, \
.n_linear_ranges = 2, \
+ .n_voltages = 0x74, \
.vsel_reg = FAN53880_LDO ## _num ## VOUT, \
.vsel_mask = 0x7f, \
.enable_reg = FAN53880_ENABLE, \
@@ -76,6 +77,7 @@ static const struct regulator_desc fan53880_regulators[] = {
REGULATOR_LINEAR_RANGE(600000, 0x1f, 0xf7, 12500),
},
.n_linear_ranges = 2,
+ .n_voltages = 0xf8,
.vsel_reg = FAN53880_BUCKVOUT,
.vsel_mask = 0x7f,
.enable_reg = FAN53880_ENABLE,
@@ -95,6 +97,7 @@ static const struct regulator_desc fan53880_regulators[] = {
REGULATOR_LINEAR_RANGE(3000000, 0x4, 0x70, 25000),
},
.n_linear_ranges = 2,
+ .n_voltages = 0x71,
.vsel_reg = FAN53880_BOOSTVOUT,
.vsel_mask = 0x7f,
.enable_reg = FAN53880_ENABLE_BOOST,
--
2.25.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v2 2/2] regulator: fan53880: Convert to use .probe_new
2021-05-17 10:53 [PATCH v2 1/2] regulator: fan53880: Fix missing n_voltages setting Axel Lin
@ 2021-05-17 10:53 ` Axel Lin
2021-05-18 12:00 ` Christoph Fritz
2021-05-18 12:00 ` [PATCH v2 1/2] regulator: fan53880: Fix missing n_voltages setting Christoph Fritz
2021-05-18 16:31 ` Mark Brown
2 siblings, 1 reply; 5+ messages in thread
From: Axel Lin @ 2021-05-17 10:53 UTC (permalink / raw)
To: Mark Brown; +Cc: Christoph Fritz, Liam Girdwood, linux-kernel, Axel Lin
Use the new .probe_new for fan53880.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
v2: no change
drivers/regulator/fan53880.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/regulator/fan53880.c b/drivers/regulator/fan53880.c
index 1684faf82ed2..f3268b4d5066 100644
--- a/drivers/regulator/fan53880.c
+++ b/drivers/regulator/fan53880.c
@@ -114,8 +114,7 @@ static const struct regmap_config fan53880_regmap = {
.max_register = FAN53880_ENABLE_BOOST,
};
-static int fan53880_i2c_probe(struct i2c_client *i2c,
- const struct i2c_device_id *id)
+static int fan53880_i2c_probe(struct i2c_client *i2c)
{
struct regulator_config config = { };
struct regulator_dev *rdev;
@@ -177,7 +176,7 @@ static struct i2c_driver fan53880_regulator_driver = {
.name = "fan53880",
.of_match_table = of_match_ptr(fan53880_dt_ids),
},
- .probe = fan53880_i2c_probe,
+ .probe_new = fan53880_i2c_probe,
.id_table = fan53880_i2c_id,
};
module_i2c_driver(fan53880_regulator_driver);
--
2.25.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH v2 2/2] regulator: fan53880: Convert to use .probe_new
2021-05-17 10:53 ` [PATCH v2 2/2] regulator: fan53880: Convert to use .probe_new Axel Lin
@ 2021-05-18 12:00 ` Christoph Fritz
0 siblings, 0 replies; 5+ messages in thread
From: Christoph Fritz @ 2021-05-18 12:00 UTC (permalink / raw)
To: Axel Lin, Mark Brown; +Cc: Liam Girdwood, linux-kernel
On Mon, 2021-05-17 at 18:53 +0800, Axel Lin wrote:
> Use the new .probe_new for fan53880.
>
> Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Christoph Fritz <chf.fritz@googlemail.com>
> ---
> v2: no change
> drivers/regulator/fan53880.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/regulator/fan53880.c b/drivers/regulator/fan53880.c
> index 1684faf82ed2..f3268b4d5066 100644
> --- a/drivers/regulator/fan53880.c
> +++ b/drivers/regulator/fan53880.c
> @@ -114,8 +114,7 @@ static const struct regmap_config fan53880_regmap = {
> .max_register = FAN53880_ENABLE_BOOST,
> };
>
> -static int fan53880_i2c_probe(struct i2c_client *i2c,
> - const struct i2c_device_id *id)
> +static int fan53880_i2c_probe(struct i2c_client *i2c)
> {
> struct regulator_config config = { };
> struct regulator_dev *rdev;
> @@ -177,7 +176,7 @@ static struct i2c_driver fan53880_regulator_driver =
> {
> .name = "fan53880",
> .of_match_table = of_match_ptr(fan53880_dt_ids),
> },
> - .probe = fan53880_i2c_probe,
> + .probe_new = fan53880_i2c_probe,
> .id_table = fan53880_i2c_id,
> };
> module_i2c_driver(fan53880_regulator_driver);
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/2] regulator: fan53880: Fix missing n_voltages setting
2021-05-17 10:53 [PATCH v2 1/2] regulator: fan53880: Fix missing n_voltages setting Axel Lin
2021-05-17 10:53 ` [PATCH v2 2/2] regulator: fan53880: Convert to use .probe_new Axel Lin
@ 2021-05-18 12:00 ` Christoph Fritz
2021-05-18 16:31 ` Mark Brown
2 siblings, 0 replies; 5+ messages in thread
From: Christoph Fritz @ 2021-05-18 12:00 UTC (permalink / raw)
To: Axel Lin, Mark Brown; +Cc: Liam Girdwood, linux-kernel
On Mon, 2021-05-17 at 18:53 +0800, Axel Lin wrote:
> Fixes: e6dea51e2d41 ("regulator: fan53880: Add initial support")
> Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Christoph Fritz <chf.fritz@googlemail.com>
> ---
> v2: address Christoph' comment
> drivers/regulator/fan53880.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/regulator/fan53880.c b/drivers/regulator/fan53880.c
> index e83eb4fb1876..1684faf82ed2 100644
> --- a/drivers/regulator/fan53880.c
> +++ b/drivers/regulator/fan53880.c
> @@ -51,6 +51,7 @@ static const struct regulator_ops fan53880_ops = {
> REGULATOR_LINEAR_RANGE(800000, 0xf, 0x73, 25000), \
> }, \
> .n_linear_ranges = 2, \
> + .n_voltages = 0x74, \
> .vsel_reg = FAN53880_LDO ## _num ## VOUT, \
> .vsel_mask = 0x7f, \
> .enable_reg = FAN53880_ENABLE, \
> @@ -76,6 +77,7 @@ static const struct regulator_desc
> fan53880_regulators[] = {
> REGULATOR_LINEAR_RANGE(600000, 0x1f, 0xf7, 12500),
> },
> .n_linear_ranges = 2,
> + .n_voltages = 0xf8,
> .vsel_reg = FAN53880_BUCKVOUT,
> .vsel_mask = 0x7f,
> .enable_reg = FAN53880_ENABLE,
> @@ -95,6 +97,7 @@ static const struct regulator_desc
> fan53880_regulators[] = {
> REGULATOR_LINEAR_RANGE(3000000, 0x4, 0x70, 25000),
> },
> .n_linear_ranges = 2,
> + .n_voltages = 0x71,
> .vsel_reg = FAN53880_BOOSTVOUT,
> .vsel_mask = 0x7f,
> .enable_reg = FAN53880_ENABLE_BOOST,
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH v2 1/2] regulator: fan53880: Fix missing n_voltages setting
2021-05-17 10:53 [PATCH v2 1/2] regulator: fan53880: Fix missing n_voltages setting Axel Lin
2021-05-17 10:53 ` [PATCH v2 2/2] regulator: fan53880: Convert to use .probe_new Axel Lin
2021-05-18 12:00 ` [PATCH v2 1/2] regulator: fan53880: Fix missing n_voltages setting Christoph Fritz
@ 2021-05-18 16:31 ` Mark Brown
2 siblings, 0 replies; 5+ messages in thread
From: Mark Brown @ 2021-05-18 16:31 UTC (permalink / raw)
To: Axel Lin; +Cc: Mark Brown, Christoph Fritz, linux-kernel, Liam Girdwood
On Mon, 17 May 2021 18:53:24 +0800, Axel Lin wrote:
>
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
Thanks!
[1/2] regulator: fan53880: Fix missing n_voltages setting
commit: 34991ee96fd8477479dd15adadceb6b28b30d9b0
[2/2] regulator: fan53880: Convert to use .probe_new
commit: 7075359c8e0da1b01e34201b09b9ab2fd23b8a7d
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-05-18 16:32 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-17 10:53 [PATCH v2 1/2] regulator: fan53880: Fix missing n_voltages setting Axel Lin
2021-05-17 10:53 ` [PATCH v2 2/2] regulator: fan53880: Convert to use .probe_new Axel Lin
2021-05-18 12:00 ` Christoph Fritz
2021-05-18 12:00 ` [PATCH v2 1/2] regulator: fan53880: Fix missing n_voltages setting Christoph Fritz
2021-05-18 16:31 ` Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).