* [PATCH] ACPI: sysfs: Change ACPI_MASKABLE_GPE_MAX to 0x100
@ 2019-11-05 14:35 Yunfeng Ye
2019-11-13 23:21 ` Rafael J. Wysocki
0 siblings, 1 reply; 3+ messages in thread
From: Yunfeng Ye @ 2019-11-05 14:35 UTC (permalink / raw)
To: rjw, lenb; +Cc: linux-acpi, linux-kernel, linux-doc, hushiyuan, linfeilong
There are two problems after commit 0f27cff8597d ("ACPI: sysfs: Make
ACPI GPE mask kernel parameter cover all GPEs"):
1. ACPI_MASKABLE_GPE_MAX is changed from 0x80 to 0xff, so the check
condition "gpe > ACPI_MASKABLE_GPE_MAX" is not valid because the type of
gpe is u8.
2. The size of bitmap is ACPI_MASKABLE_GPE_MAX, so it is not support the
num 255 for gpe.
Update the macro ACPI_MASKABLE_GPE_MAX to 0x100, and change the type of
gpe to u32, also modify the checking condition for gpe.
Bye the way, update the docs for kernel parameter acpi_mask_gpe.
Fixes: 0f27cff8597d ("ACPI: sysfs: Make ACPI GPE mask kernel parameter cover all GPEs")
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
---
Documentation/admin-guide/kernel-parameters.txt | 1 +
drivers/acpi/sysfs.c | 8 ++++----
2 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index a84a83f8881e..dd878e2491e1 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -114,6 +114,7 @@
This facility can be used to prevent such uncontrolled
GPE floodings.
Format: <int>
+ Support masking of GPEs numbered from 0x00 to 0xff
acpi_no_auto_serialize [HW,ACPI]
Disable auto-serialization of AML methods
diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c
index 75948a3f1a20..3c3302583d78 100644
--- a/drivers/acpi/sysfs.c
+++ b/drivers/acpi/sysfs.c
@@ -819,14 +819,14 @@ static ssize_t counter_set(struct kobject *kobj,
* interface:
* echo unmask > /sys/firmware/acpi/interrupts/gpe00
*/
-#define ACPI_MASKABLE_GPE_MAX 0xFF
+#define ACPI_MASKABLE_GPE_MAX 0x100
static DECLARE_BITMAP(acpi_masked_gpes_map, ACPI_MASKABLE_GPE_MAX) __initdata;
static int __init acpi_gpe_set_masked_gpes(char *val)
{
- u8 gpe;
+ u32 gpe;
- if (kstrtou8(val, 0, &gpe) || gpe > ACPI_MASKABLE_GPE_MAX)
+ if (kstrtouint(val, 0, &gpe) || gpe >= ACPI_MASKABLE_GPE_MAX)
return -EINVAL;
set_bit(gpe, acpi_masked_gpes_map);
@@ -838,7 +838,7 @@ void __init acpi_gpe_apply_masked_gpes(void)
{
acpi_handle handle;
acpi_status status;
- u8 gpe;
+ u32 gpe;
for_each_set_bit(gpe, acpi_masked_gpes_map, ACPI_MASKABLE_GPE_MAX) {
status = acpi_get_gpe_device(gpe, &handle);
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] ACPI: sysfs: Change ACPI_MASKABLE_GPE_MAX to 0x100
2019-11-05 14:35 [PATCH] ACPI: sysfs: Change ACPI_MASKABLE_GPE_MAX to 0x100 Yunfeng Ye
@ 2019-11-13 23:21 ` Rafael J. Wysocki
2019-11-14 6:45 ` Yunfeng Ye
0 siblings, 1 reply; 3+ messages in thread
From: Rafael J. Wysocki @ 2019-11-13 23:21 UTC (permalink / raw)
To: Yunfeng Ye
Cc: lenb, linux-acpi, linux-kernel, linux-doc, hushiyuan, linfeilong
On Tuesday, November 5, 2019 3:35:25 PM CET Yunfeng Ye wrote:
> There are two problems after commit 0f27cff8597d ("ACPI: sysfs: Make
> ACPI GPE mask kernel parameter cover all GPEs"):
>
> 1. ACPI_MASKABLE_GPE_MAX is changed from 0x80 to 0xff, so the check
> condition "gpe > ACPI_MASKABLE_GPE_MAX" is not valid because the type of
> gpe is u8.
>
> 2. The size of bitmap is ACPI_MASKABLE_GPE_MAX, so it is not support the
> num 255 for gpe.
>
> Update the macro ACPI_MASKABLE_GPE_MAX to 0x100, and change the type of
> gpe to u32, also modify the checking condition for gpe.
>
> Bye the way, update the docs for kernel parameter acpi_mask_gpe.
>
> Fixes: 0f27cff8597d ("ACPI: sysfs: Make ACPI GPE mask kernel parameter cover all GPEs")
> Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
AFAICS this really is about supporting the masking of GPE 0xFF.
> ---
> Documentation/admin-guide/kernel-parameters.txt | 1 +
> drivers/acpi/sysfs.c | 8 ++++----
> 2 files changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index a84a83f8881e..dd878e2491e1 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -114,6 +114,7 @@
> This facility can be used to prevent such uncontrolled
> GPE floodings.
> Format: <int>
> + Support masking of GPEs numbered from 0x00 to 0xff
Why not just say "Format: <byte>" ?
>
> acpi_no_auto_serialize [HW,ACPI]
> Disable auto-serialization of AML methods
> diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c
> index 75948a3f1a20..3c3302583d78 100644
> --- a/drivers/acpi/sysfs.c
> +++ b/drivers/acpi/sysfs.c
> @@ -819,14 +819,14 @@ static ssize_t counter_set(struct kobject *kobj,
> * interface:
> * echo unmask > /sys/firmware/acpi/interrupts/gpe00
> */
> -#define ACPI_MASKABLE_GPE_MAX 0xFF
> +#define ACPI_MASKABLE_GPE_MAX 0x100
So this is the only change that's necessary AFAICS.
> static DECLARE_BITMAP(acpi_masked_gpes_map, ACPI_MASKABLE_GPE_MAX) __initdata;
>
> static int __init acpi_gpe_set_masked_gpes(char *val)
> {
> - u8 gpe;
> + u32 gpe;
>
> - if (kstrtou8(val, 0, &gpe) || gpe > ACPI_MASKABLE_GPE_MAX)
And here you can drop the ACPI_MASKABLE_GPE_MAX check and the rest can remain
as is.
> + if (kstrtouint(val, 0, &gpe) || gpe >= ACPI_MASKABLE_GPE_MAX)
> return -EINVAL;
> set_bit(gpe, acpi_masked_gpes_map);
>
> @@ -838,7 +838,7 @@ void __init acpi_gpe_apply_masked_gpes(void)
> {
> acpi_handle handle;
> acpi_status status;
> - u8 gpe;
> + u32 gpe;
>
> for_each_set_bit(gpe, acpi_masked_gpes_map, ACPI_MASKABLE_GPE_MAX) {
> status = acpi_get_gpe_device(gpe, &handle);
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] ACPI: sysfs: Change ACPI_MASKABLE_GPE_MAX to 0x100
2019-11-13 23:21 ` Rafael J. Wysocki
@ 2019-11-14 6:45 ` Yunfeng Ye
0 siblings, 0 replies; 3+ messages in thread
From: Yunfeng Ye @ 2019-11-14 6:45 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: lenb, linux-acpi, linux-kernel, linux-doc, hushiyuan, linfeilong
On 2019/11/14 7:21, Rafael J. Wysocki wrote:
> On Tuesday, November 5, 2019 3:35:25 PM CET Yunfeng Ye wrote:
>> There are two problems after commit 0f27cff8597d ("ACPI: sysfs: Make
>> ACPI GPE mask kernel parameter cover all GPEs"):
>>
>> 1. ACPI_MASKABLE_GPE_MAX is changed from 0x80 to 0xff, so the check
>> condition "gpe > ACPI_MASKABLE_GPE_MAX" is not valid because the type of
>> gpe is u8.
>>
>> 2. The size of bitmap is ACPI_MASKABLE_GPE_MAX, so it is not support the
>> num 255 for gpe.
>>
>> Update the macro ACPI_MASKABLE_GPE_MAX to 0x100, and change the type of
>> gpe to u32, also modify the checking condition for gpe.
>>
>> Bye the way, update the docs for kernel parameter acpi_mask_gpe.
>>
>> Fixes: 0f27cff8597d ("ACPI: sysfs: Make ACPI GPE mask kernel parameter cover all GPEs")
>> Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
>
> AFAICS this really is about supporting the masking of GPE 0xFF.
>>> ---
>> Documentation/admin-guide/kernel-parameters.txt | 1 +
>> drivers/acpi/sysfs.c | 8 ++++----
>> 2 files changed, 5 insertions(+), 4 deletions(-)
>>
>> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
>> index a84a83f8881e..dd878e2491e1 100644
>> --- a/Documentation/admin-guide/kernel-parameters.txt
>> +++ b/Documentation/admin-guide/kernel-parameters.txt
>> @@ -114,6 +114,7 @@
>> This facility can be used to prevent such uncontrolled
>> GPE floodings.
>> Format: <int>
>> + Support masking of GPEs numbered from 0x00 to 0xff
>
> Why not just say "Format: <byte>" ?
>
ok, thanks.
>>
>> acpi_no_auto_serialize [HW,ACPI]
>> Disable auto-serialization of AML methods
>> diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c
>> index 75948a3f1a20..3c3302583d78 100644
>> --- a/drivers/acpi/sysfs.c
>> +++ b/drivers/acpi/sysfs.c
>> @@ -819,14 +819,14 @@ static ssize_t counter_set(struct kobject *kobj,
>> * interface:
>> * echo unmask > /sys/firmware/acpi/interrupts/gpe00
>> */
>> -#define ACPI_MASKABLE_GPE_MAX 0xFF
>> +#define ACPI_MASKABLE_GPE_MAX 0x100
>
> So this is the only change that's necessary AFAICS.
>
>> static DECLARE_BITMAP(acpi_masked_gpes_map, ACPI_MASKABLE_GPE_MAX) __initdata;
>>
>> static int __init acpi_gpe_set_masked_gpes(char *val)
>> {
>> - u8 gpe;
>> + u32 gpe;
>>
>> - if (kstrtou8(val, 0, &gpe) || gpe > ACPI_MASKABLE_GPE_MAX)
>
> And here you can drop the ACPI_MASKABLE_GPE_MAX check and the rest can remain
> as is.
>
I will modify as your suggestion, thanks.
>> + if (kstrtouint(val, 0, &gpe) || gpe >= ACPI_MASKABLE_GPE_MAX)
>> return -EINVAL;
>> set_bit(gpe, acpi_masked_gpes_map);
>>
>> @@ -838,7 +838,7 @@ void __init acpi_gpe_apply_masked_gpes(void)
>> {
>> acpi_handle handle;
>> acpi_status status;
>> - u8 gpe;
>> + u32 gpe;
>>
>> for_each_set_bit(gpe, acpi_masked_gpes_map, ACPI_MASKABLE_GPE_MAX) {
>> status = acpi_get_gpe_device(gpe, &handle);
>>
>
>
>
>
>
> .
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-11-14 6:45 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-05 14:35 [PATCH] ACPI: sysfs: Change ACPI_MASKABLE_GPE_MAX to 0x100 Yunfeng Ye
2019-11-13 23:21 ` Rafael J. Wysocki
2019-11-14 6:45 ` Yunfeng Ye
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).