linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rich Felker <dalias@libc.org>
To: linux-kernel@vger.kernel.org, linux-sh@vger.kernel.org
Cc: Rich Felker <dalias@libc.org>,
	Yoshinori Sato <ysato@users.sourceforge.jp>
Subject: [PATCH v3 11/12] sh: add defconfig for J-Core J2
Date: Wed, 25 May 2016 05:43:03 +0000	[thread overview]
Message-ID: <8cfc7e24fefa8c9c3111f7cfb907e59789f93ab9.1464148904.git.dalias@libc.org> (raw)
In-Reply-To: <cover.1464148904.git.dalias@libc.org>

This defconfig is intended not to be specific to a particular board;
it enables drivers for all currently-supported hardware, and should be
updated to include additional drivers as they are added.

Signed-off-by: Rich Felker <dalias@libc.org>
---
 arch/sh/configs/j2_defconfig | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 arch/sh/configs/j2_defconfig

diff --git a/arch/sh/configs/j2_defconfig b/arch/sh/configs/j2_defconfig
new file mode 100644
index 0000000..fca167f
--- /dev/null
+++ b/arch/sh/configs/j2_defconfig
@@ -0,0 +1,38 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CPU_SUBTYPE_J2=y
+CONFIG_MEMORY_START=0x10000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_SH_DEVICE_TREE=y
+CONFIG_HZ_100=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttyUL0 earlycon"
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_NETDEVICES=y
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+CONFIG_I2C=y
+CONFIG_SPI=y
+CONFIG_SPI_JCORE=y
+CONFIG_WATCHDOG=y
+CONFIG_MMC=y
+CONFIG_MMC_SPI=y
+CONFIG_CLKSRC_JCORE_PIT=y
+CONFIG_JCORE_AIC=y
+CONFIG_EXT4_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_FAT_DEFAULT_UTF8=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_UTF8=y
-- 
2.8.1

  parent reply	other threads:[~2016-05-25  5:43 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-25  5:43 [PATCH v3 00/12] J-core J2 cpu and SoC peripherals support Rich Felker
2016-05-25  5:43 ` [PATCH v3 01/12] of: add vendor prefix for J-Core Rich Felker
2016-05-25 13:18   ` Rob Herring
2016-07-27  5:31     ` Rich Felker
2016-08-04 22:27       ` Rich Felker
2016-08-30 21:13         ` Rob Herring
2016-05-25  5:43 ` [PATCH v3 12/12] sh: add device tree source for J2 FPGA on Mimas v2 board Rich Felker
2016-05-25 10:33   ` Mark Rutland
2016-05-25 23:15     ` Rich Felker
2016-05-26 10:39       ` Mark Rutland
2016-05-25  5:43 ` [PATCH v3 02/12] of: add J-Core cpu bindings Rich Felker
2016-05-25 10:22   ` Mark Rutland
2016-05-25 23:04     ` Rich Felker
2016-05-26  7:54       ` Geert Uytterhoeven
2016-05-26 10:38       ` Mark Rutland
2016-05-26 15:33         ` Rich Felker
2016-05-27  9:13           ` Mark Rutland
2016-05-26 21:44       ` Rob Landley
2016-05-27 11:51         ` Afzal Mohammed
2016-05-25  5:43 ` [PATCH v3 09/12] clocksource: add J-Core timer/clocksource driver Rich Felker
2016-05-25  5:43 ` [PATCH v3 03/12] of: add J-Core interrupt controller bindings Rich Felker
2016-05-25 10:25   ` Mark Rutland
2016-05-25 23:08     ` Rich Felker
2016-05-25  5:43 ` Rich Felker [this message]
2016-05-25  5:43 ` [PATCH v3 07/12] sh: add AT_HWCAP flag for J-Core cas.l instruction Rich Felker
2016-05-25  5:43 ` [PATCH v3 10/12] spi: add driver for J-Core SPI controller Rich Felker
2016-05-25 10:17   ` Mark Brown
2016-05-27  1:16     ` Rich Felker
2016-05-27 11:27       ` Mark Brown
2016-05-25  5:43 ` [PATCH v3 04/12] of: add J-Core timer bindings Rich Felker
2016-06-01 13:58   ` Rob Herring
2016-06-01 17:53     ` Rich Felker
2016-06-01 21:53       ` Rich Felker
2016-06-01 22:36       ` Rob Herring
2016-06-02  1:34         ` Rich Felker
2016-06-02 22:44           ` Rob Herring
2016-06-23 21:16             ` Rich Felker
2016-07-14 22:18               ` Rich Felker
2016-05-25  5:43 ` [PATCH v3 05/12] of: add J-Core SPI master bindings Rich Felker
2016-05-25 19:04   ` Rob Herring
2016-05-25  5:43 ` [PATCH v3 06/12] sh: add support for J-Core J2 processor Rich Felker
2016-05-25  5:43 ` [PATCH v3 08/12] irqchip: add J-Core AIC driver Rich Felker
2016-07-15  1:27   ` Rich Felker
2016-07-15 18:19     ` Rich Felker
2016-07-15 15:35   ` Paul Gortmaker
2016-07-15 15:41     ` Rich Felker
2016-07-15 16:19   ` Jason Cooper
2016-07-15 17:02     ` Rich Felker
2016-05-25  7:22 ` [PATCH v3 00/12] J-core J2 cpu and SoC peripherals support Geert Uytterhoeven
2016-05-25  9:54 ` Mark Brown
2016-05-25 22:24   ` Rich Felker
2016-05-26  0:42     ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8cfc7e24fefa8c9c3111f7cfb907e59789f93ab9.1464148904.git.dalias@libc.org \
    --to=dalias@libc.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=ysato@users.sourceforge.jp \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).