* [PATCH v3 00/13] Enable USB host and device functions on Jetson
@ 2022-11-14 12:40 Wayne Chang
2022-11-14 12:40 ` [PATCH v3 01/13] dt-bindings: usb: tegra-xudc: Add Tegra234 XUSB controller support Wayne Chang
` (13 more replies)
0 siblings, 14 replies; 40+ messages in thread
From: Wayne Chang @ 2022-11-14 12:40 UTC (permalink / raw)
To: gregkh, robh+dt, krzysztof.kozlowski+dt, treding, jonathanh,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: waynec, linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
The patch series enable the USB host and devie functions on Jetson AGX Orin
and depend on the following change
https://lore.kernel.org/all/20221003125141.123759-1-jonathanh@nvidia.com/
Sing-Han Chen (3):
phy: tegra: xusb: Add Tegra234 support
usb: host: xhci-tegra: Add Tegra234 XHCI support
usb: gadget: tegra-xudc: Add Tegra234 support
Wayne Chang (10):
dt-bindings: usb: tegra-xudc: Add Tegra234 XUSB controller support
dt-bindings: usb: Add NVIDIA Tegra234 XUSB host controller binding
dt-bindings: usb: Add binding for Cypress cypd4226 I2C driver
arm64: tegra: Enable XUSB host and device on Jetson AGX Orin
usb: typec: ucsi_ccg: Add OF support
usb: typec: ucsi_ccg: Add cypress,firmware-build as a well-known regex
i2c: nvidia-gpu: Add cypress,firmware-build as a well-known regex
usb: typec: ucsi_ccg: Remove ccgx,firmware-build property
i2c: nvidia-gpu: Remove ccgx,firmware-build property
phy: tegra: xusb: Disable trk clk when not in use
.../bindings/usb/cypress,cypd4226.yaml | 86 ++++++
.../bindings/usb/nvidia,tegra-xudc.yaml | 24 +-
.../bindings/usb/nvidia,tegra234-xusb.yaml | 159 +++++++++++
.../boot/dts/nvidia/tegra234-p3701-0000.dtsi | 48 ++++
.../nvidia/tegra234-p3737-0000+p3701-0000.dts | 175 ++++++++++++
arch/arm64/boot/dts/nvidia/tegra234.dtsi | 170 +++++++++++
drivers/i2c/busses/i2c-nvidia-gpu.c | 4 +-
drivers/phy/tegra/Makefile | 1 +
drivers/phy/tegra/xusb-tegra186.c | 64 ++++-
drivers/phy/tegra/xusb.c | 6 +
drivers/phy/tegra/xusb.h | 22 ++
drivers/usb/gadget/udc/tegra-xudc.c | 17 ++
drivers/usb/host/xhci-tegra.c | 270 +++++++++++++++---
drivers/usb/typec/ucsi/ucsi_ccg.c | 22 +-
14 files changed, 1014 insertions(+), 54 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml
base-commit: 094226ad94f471a9f19e8f8e7140a09c2625abaa
--
2.25.1
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v3 01/13] dt-bindings: usb: tegra-xudc: Add Tegra234 XUSB controller support
2022-11-14 12:40 [PATCH v3 00/13] Enable USB host and device functions on Jetson Wayne Chang
@ 2022-11-14 12:40 ` Wayne Chang
2022-11-15 12:14 ` Jon Hunter
2022-11-16 21:05 ` Rob Herring
2022-11-14 12:40 ` [PATCH v3 02/13] dt-bindings: usb: Add NVIDIA Tegra234 XUSB host controller binding Wayne Chang
` (12 subsequent siblings)
13 siblings, 2 replies; 40+ messages in thread
From: Wayne Chang @ 2022-11-14 12:40 UTC (permalink / raw)
To: gregkh, robh+dt, krzysztof.kozlowski+dt, treding, jonathanh,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: waynec, linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
Extend the Tegra XUSB controller device tree binding with Tegra234
support.
Signed-off-by: Wayne Chang <waynec@nvidia.com>
---
V2 -> V3:nothing has changed
V1 -> V2:address the issue on phy-names property
.../bindings/usb/nvidia,tegra-xudc.yaml | 24 ++++++++++++-------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
index fd6e7c81426e..52488a731c4e 100644
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
@@ -22,6 +22,7 @@ properties:
- nvidia,tegra210-xudc # For Tegra210
- nvidia,tegra186-xudc # For Tegra186
- nvidia,tegra194-xudc # For Tegra194
+ - nvidia,tegra234-xudc # For Tegra234
reg:
minItems: 2
@@ -90,21 +91,27 @@ properties:
phys:
minItems: 1
+ maxItems: 8
description:
Must contain an entry for each entry in phy-names.
See ../phy/phy-bindings.txt for details.
phy-names:
minItems: 1
+ maxItems: 8
items:
- - const: usb2-0
- - const: usb2-1
- - const: usb2-2
- - const: usb2-3
- - const: usb3-0
- - const: usb3-1
- - const: usb3-2
- - const: usb3-3
+ enum:
+ - usb2-0
+ - usb2-1
+ - usb2-2
+ - usb2-3
+ - usb3-0
+ - usb3-1
+ - usb3-2
+ - usb3-3
+
+ dma-coherent:
+ type: boolean
avddio-usb-supply:
description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
@@ -153,6 +160,7 @@ allOf:
enum:
- nvidia,tegra186-xudc
- nvidia,tegra194-xudc
+ - nvidia,tegra234-xudc
then:
properties:
reg:
--
2.25.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 02/13] dt-bindings: usb: Add NVIDIA Tegra234 XUSB host controller binding
2022-11-14 12:40 [PATCH v3 00/13] Enable USB host and device functions on Jetson Wayne Chang
2022-11-14 12:40 ` [PATCH v3 01/13] dt-bindings: usb: tegra-xudc: Add Tegra234 XUSB controller support Wayne Chang
@ 2022-11-14 12:40 ` Wayne Chang
2022-11-14 19:16 ` Rob Herring
2022-11-15 12:14 ` Jon Hunter
2022-11-14 12:40 ` [PATCH v3 03/13] dt-bindings: usb: Add binding for Cypress cypd4226 I2C driver Wayne Chang
` (11 subsequent siblings)
13 siblings, 2 replies; 40+ messages in thread
From: Wayne Chang @ 2022-11-14 12:40 UTC (permalink / raw)
To: gregkh, robh+dt, krzysztof.kozlowski+dt, treding, jonathanh,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: waynec, linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
Add device-tree binding documentation for the XUSB host controller present
on Tegra234 SoC. This controller supports the USB 3.1 specification.
Signed-off-by: Wayne Chang <waynec@nvidia.com>
---
depends on the following change
https://lore.kernel.org/all/20221003125141.123759-1-jonathanh@nvidia.com/
V2 -> V3:nothing has changed but added the dependency here
V1 -> V2:new change for adding nvidia,tegra234-xusb.yaml
.../bindings/usb/nvidia,tegra234-xusb.yaml | 159 ++++++++++++++++++
1 file changed, 159 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml
new file mode 100644
index 000000000000..d78ee88ed208
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nvidia,tegra234-xusb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra234 xHCI controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+description: The Tegra xHCI controller supports both USB2 and USB3 interfaces
+ exposed by the Tegra XUSB pad controller.
+
+properties:
+ compatible:
+ const: nvidia,tegra234-xusb
+
+ reg:
+ items:
+ - description: base and length of the xHCI host registers
+ - description: base and length of the XUSB FPCI registers
+ - description: base and length of the XUSB bar2 registers
+
+ reg-names:
+ items:
+ - const: hcd
+ - const: fpci
+ - const: bar2
+
+ interrupts:
+ items:
+ - description: xHCI host interrupt
+ - description: mailbox interrupt
+
+ clocks:
+ items:
+ - description: XUSB host clock
+ - description: XUSB Falcon source clock
+ - description: XUSB SuperSpeed clock
+ - description: XUSB SuperSpeed source clock
+ - description: XUSB HighSpeed clock source
+ - description: XUSB FullSpeed clock source
+ - description: USB PLL
+ - description: reference clock
+ - description: I/O PLL
+
+ clock-names:
+ items:
+ - const: xusb_host
+ - const: xusb_falcon_src
+ - const: xusb_ss
+ - const: xusb_ss_src
+ - const: xusb_hs_src
+ - const: xusb_fs_src
+ - const: pll_u_480m
+ - const: clk_m
+ - const: pll_e
+
+ interconnects:
+ items:
+ - description: read client
+ - description: write client
+
+ interconnect-names:
+ items:
+ - const: dma-mem # read
+ - const: write
+
+ iommus:
+ maxItems: 1
+
+ nvidia,xusb-padctl:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to the XUSB pad controller that is used to configure
+ the USB pads used by the XHCI controller
+
+ phys:
+ minItems: 1
+ maxItems: 8
+
+ phy-names:
+ minItems: 1
+ maxItems: 8
+ items:
+ enum:
+ - usb2-0
+ - usb2-1
+ - usb2-2
+ - usb2-3
+ - usb3-0
+ - usb3-1
+ - usb3-2
+ - usb3-3
+
+ power-domains:
+ items:
+ - description: XUSBC power domain
+ - description: XUSBA power domain
+
+ power-domain-names:
+ items:
+ - const: xusb_host
+ - const: xusb_ss
+
+ dma-coherent:
+ type: boolean
+
+allOf:
+ - $ref: usb-xhci.yaml
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/tegra234-gpio.h>
+ #include <dt-bindings/clock/tegra234-clock.h>
+ #include <dt-bindings/memory/tegra234-mc.h>
+ #include <dt-bindings/power/tegra234-powergate.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ usb@3610000 {
+ compatible = "nvidia,tegra234-xusb";
+ reg = <0x03610000 0x40000>,
+ <0x03600000 0x10000>,
+ <0x03650000 0x10000>;
+ reg-names = "hcd", "fpci", "bar2";
+
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_HOST>,
+ <&bpmp TEGRA234_CLK_XUSB_FALCON>,
+ <&bpmp TEGRA234_CLK_XUSB_CORE_SS>,
+ <&bpmp TEGRA234_CLK_XUSB_SS>,
+ <&bpmp TEGRA234_CLK_CLK_M>,
+ <&bpmp TEGRA234_CLK_XUSB_FS>,
+ <&bpmp TEGRA234_CLK_UTMIP_PLL>,
+ <&bpmp TEGRA234_CLK_CLK_M>,
+ <&bpmp TEGRA234_CLK_PLLE>;
+ clock-names = "xusb_host", "xusb_falcon_src",
+ "xusb_ss", "xusb_ss_src", "xusb_hs_src",
+ "xusb_fs_src", "pll_u_480m", "clk_m",
+ "pll_e";
+ interconnects = <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+ <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+ interconnect-names = "dma-mem", "write";
+ iommus = <&smmu_niso1 TEGRA234_SID_XUSB_HOST>;
+
+ power-domains = <&bpmp TEGRA234_POWER_DOMAIN_XUSBC>,
+ <&bpmp TEGRA234_POWER_DOMAIN_XUSBA>;
+ power-domain-names = "xusb_host", "xusb_ss";
+
+ nvidia,xusb-padctl = <&xusb_padctl>;
+
+ phys = <&pad_lanes_usb2_0>;
+ phy-names = "usb2-0";
+
+ };
--
2.25.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 03/13] dt-bindings: usb: Add binding for Cypress cypd4226 I2C driver
2022-11-14 12:40 [PATCH v3 00/13] Enable USB host and device functions on Jetson Wayne Chang
2022-11-14 12:40 ` [PATCH v3 01/13] dt-bindings: usb: tegra-xudc: Add Tegra234 XUSB controller support Wayne Chang
2022-11-14 12:40 ` [PATCH v3 02/13] dt-bindings: usb: Add NVIDIA Tegra234 XUSB host controller binding Wayne Chang
@ 2022-11-14 12:40 ` Wayne Chang
2022-11-15 12:15 ` Jon Hunter
2022-11-16 21:14 ` Rob Herring
2022-11-14 12:40 ` [PATCH v3 04/13] arm64: tegra: Enable XUSB host and device on Jetson AGX Orin Wayne Chang
` (10 subsequent siblings)
13 siblings, 2 replies; 40+ messages in thread
From: Wayne Chang @ 2022-11-14 12:40 UTC (permalink / raw)
To: gregkh, robh+dt, krzysztof.kozlowski+dt, treding, jonathanh,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: waynec, linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
add device-tree binding documentation for Cypress cypd4226 type-C
controller's I2C interface. It is a standard I2C slave with GPIO
input as IRQ interface.
Signed-off-by: Wayne Chang <waynec@nvidia.com>
---
V2 -> V3:fix additionalProperties warning on new schema
V1 -> V2:based on the review comments. Fix some addressed issues on
description, interrupts, cypress,firmware-build, connector, and
additionalProperties properties. And also remove the status in the example.
.../bindings/usb/cypress,cypd4226.yaml | 86 +++++++++++++++++++
1 file changed, 86 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
diff --git a/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
new file mode 100644
index 000000000000..854fe2f9181c
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/cypress,cypd4226.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress cypd4226 UCSI I2C Type-C Controller
+
+maintainers:
+ - Wayne Chang <waynec@nvidia.com>
+
+description:
+ The Cypress cypd4226 UCSI I2C type-C controller is a I2C interface type-C
+ controller.
+
+properties:
+ compatible:
+ const: cypress,cypd4226
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ reg:
+ const: 0x08
+
+ interrupts:
+ items:
+ - description: cypd4226 I2C interrupt
+
+ cypress,firmware-build:
+ enum:
+ - nvidia,gpu
+ - nvidia,jetson-agx-xavier
+ description: |
+ the name of the CCGx firmware built for product series.
+ should be set one of following:
+ - "nvidia,gpu" for the NVIDIA RTX product series
+ - "nvidia,jetson-agx-xavier" for the NVIDIA Jetson product series
+
+patternProperties:
+ '^connector@[0-1]+$':
+ $ref: /schemas/connector/usb-connector.yaml#
+ properties:
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/tegra194-gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+
+ ucsi-ccg@8 {
+ compatible = "cypress,cypd4226";
+ interrupt-parent = <&gpio_aon>;
+ interrupts = <TEGRA194_AON_GPIO(BB, 2) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x08>;
+ cypress,firmware-build = "nvidia,jetson-agx-xavier";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ccg_typec_con0: connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ label = "USB-C";
+ data-role = "dual";
+ port {
+ ucsi_ccg_p0: endpoint {
+ remote-endpoint = <&usb_role_switch0>;
+ };
+ };
+ };
+ };
+ };
--
2.25.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 04/13] arm64: tegra: Enable XUSB host and device on Jetson AGX Orin
2022-11-14 12:40 [PATCH v3 00/13] Enable USB host and device functions on Jetson Wayne Chang
` (2 preceding siblings ...)
2022-11-14 12:40 ` [PATCH v3 03/13] dt-bindings: usb: Add binding for Cypress cypd4226 I2C driver Wayne Chang
@ 2022-11-14 12:40 ` Wayne Chang
2022-11-15 12:17 ` Jon Hunter
2022-11-14 12:40 ` [PATCH v3 05/13] usb: typec: ucsi_ccg: Add OF support Wayne Chang
` (9 subsequent siblings)
13 siblings, 1 reply; 40+ messages in thread
From: Wayne Chang @ 2022-11-14 12:40 UTC (permalink / raw)
To: gregkh, robh+dt, krzysztof.kozlowski+dt, treding, jonathanh,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: waynec, linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
This commit enables XUSB host, device, and pad controller on
Jetson AGX Orin.
Signed-off-by: Wayne Chang <waynec@nvidia.com>
---
depends on the following change
https://lore.kernel.org/all/20221003125141.123759-1-jonathanh@nvidia.com/
V2 -> V3:nothing has changed but added the dependency here
V1 -> V2:removed the redundant cells and status in ucsi-ccg.
Using dash instead of underscore in the ucsi-ccg node name.
Using representive name in cypress,firmware-build property.
.../boot/dts/nvidia/tegra234-p3701-0000.dtsi | 48 +++++
.../nvidia/tegra234-p3737-0000+p3701-0000.dts | 175 ++++++++++++++++++
arch/arm64/boot/dts/nvidia/tegra234.dtsi | 170 +++++++++++++++++
3 files changed, 393 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
index 9e4d72cfa69f..8acef87a5398 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
@@ -61,6 +61,29 @@ mmc@3460000 {
non-removable;
};
+ padctl@3520000 {
+ vclamp-usb-supply = <&vdd_ao_1v8>;
+ avdd-usb-supply = <&vdd_ao_3v3>;
+
+ ports {
+ usb2-0 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb2-1 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb2-2 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb2-3 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+ };
+ };
+
rtc@c2a0000 {
status = "okay";
};
@@ -69,4 +92,29 @@ pmc@c360000 {
nvidia,invert-interrupt;
};
};
+
+ vdd_5v0_sys: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VIN_SYS_5V0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_ao_1v8: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-AO-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vdd_ao_3v3: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-AO-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index 57ab75328814..58baedbd0f93 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -2011,6 +2011,181 @@ hda@3510000 {
nvidia,model = "NVIDIA Jetson AGX Orin HDA";
status = "okay";
};
+
+ padctl@3520000 {
+ status = "okay";
+
+ pads {
+ usb2 {
+ lanes {
+ usb2-0 {
+ status = "okay";
+ };
+
+ usb2-1 {
+ status = "okay";
+ };
+
+ usb2-2 {
+ status = "okay";
+ };
+
+ usb2-3 {
+ status = "okay";
+ };
+ };
+ };
+
+ usb3 {
+ lanes {
+ usb3-0 {
+ status = "okay";
+ };
+
+ usb3-1 {
+ status = "okay";
+ };
+
+ usb3-2 {
+ status = "okay";
+ };
+ };
+ };
+ };
+
+ ports {
+ usb2-0 {
+ mode = "otg";
+ usb-role-switch;
+ status = "okay";
+ port {
+ hs_typec_p1: endpoint {
+ remote-endpoint = <&hs_ucsi_ccg_p1>;
+ };
+ };
+ };
+
+ usb2-1 {
+ mode = "host";
+ status = "okay";
+ port {
+ hs_typec_p0: endpoint {
+ remote-endpoint = <&hs_ucsi_ccg_p0>;
+ };
+ };
+ };
+
+ usb2-2 {
+ mode = "host";
+ status = "okay";
+ };
+
+ usb2-3 {
+ mode = "host";
+ status = "okay";
+ };
+
+ usb3-0 {
+ nvidia,usb2-companion = <1>;
+ status = "okay";
+ port {
+ ss_typec_p0: endpoint {
+ remote-endpoint = <&ss_ucsi_ccg_p0>;
+ };
+ };
+ };
+
+ usb3-1 {
+ nvidia,usb2-companion = <0>;
+ status = "okay";
+ port {
+ ss_typec_p1: endpoint {
+ remote-endpoint = <&ss_ucsi_ccg_p1>;
+ };
+ };
+ };
+
+ usb3-2 {
+ nvidia,usb2-companion = <3>;
+ status = "okay";
+ };
+ };
+ };
+
+ usb@3550000 {
+ status = "okay";
+
+ phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+ <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>;
+ phy-names = "usb2-0", "usb3-1";
+ };
+
+ usb@3610000 {
+ status = "okay";
+
+ phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+ <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+ <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
+ <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+ <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+ <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>,
+ <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
+ phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3",
+ "usb3-0", "usb3-1", "usb3-2";
+ };
+
+ i2c@c240000 {
+ status = "okay";
+ ucsi-ccg@8 {
+ compatible = "cypress,cypd4226";
+ cypress,firmware-build = "nvidia,jetson-agx-xavier";
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA234_MAIN_GPIO(Y, 4) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x08>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ccg_typec_con0: connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ label = "USB-C";
+ data-role = "host";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ hs_ucsi_ccg_p0: endpoint {
+ remote-endpoint = <&hs_typec_p0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ ss_ucsi_ccg_p0: endpoint {
+ remote-endpoint = <&ss_typec_p0>;
+ };
+ };
+ };
+ ccg_typec_con1: connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ label = "USB-C";
+ data-role = "dual";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ hs_ucsi_ccg_p1: endpoint {
+ remote-endpoint = <&hs_typec_p1>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ ss_ucsi_ccg_p1: endpoint {
+ remote-endpoint = <&ss_typec_p1>;
+ };
+ };
+ };
+ };
+ };
};
chosen {
diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index 0170bfa8a467..27635d459e4c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -942,6 +942,174 @@ hda@3510000 {
status = "disabled";
};
+ xusb_padctl: padctl@3520000 {
+ compatible = "nvidia,tegra234-xusb-padctl";
+ reg = <0x03520000 0x20000>,
+ <0x03540000 0x10000>;
+ reg-names = "padctl", "ao";
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+
+ resets = <&bpmp TEGRA234_RESET_XUSB_PADCTL>;
+ reset-names = "padctl";
+
+ status = "disabled";
+
+ pads {
+ usb2 {
+ clocks = <&bpmp TEGRA234_CLK_USB2_TRK>;
+ clock-names = "trk";
+
+ lanes {
+ usb2-0 {
+ nvidia,function = "xusb";
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+
+ usb2-1 {
+ nvidia,function = "xusb";
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+
+ usb2-2 {
+ nvidia,function = "xusb";
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+
+ usb2-3 {
+ nvidia,function = "xusb";
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+ };
+ };
+
+ usb3 {
+ lanes {
+ usb3-0 {
+ nvidia,function = "xusb";
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+
+ usb3-1 {
+ nvidia,function = "xusb";
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+
+ usb3-2 {
+ nvidia,function = "xusb";
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+
+ usb3-3 {
+ nvidia,function = "xusb";
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+ };
+ };
+ };
+
+ ports {
+ usb2-0 {
+ status = "disabled";
+ };
+
+ usb2-1 {
+ status = "disabled";
+ };
+
+ usb2-2 {
+ status = "disabled";
+ };
+
+ usb2-3 {
+ status = "disabled";
+ };
+
+ usb3-0 {
+ status = "disabled";
+ };
+
+ usb3-1 {
+ status = "disabled";
+ };
+
+ usb3-2 {
+ status = "disabled";
+ };
+
+ usb3-3 {
+ status = "disabled";
+ };
+ };
+ };
+
+ usb@3550000 {
+ compatible = "nvidia,tegra234-xudc";
+ reg = <0x03550000 0x8000>,
+ <0x03558000 0x8000>;
+ reg-names = "base", "fpci";
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_DEV>,
+ <&bpmp TEGRA234_CLK_XUSB_CORE_SS>,
+ <&bpmp TEGRA234_CLK_XUSB_SS>,
+ <&bpmp TEGRA234_CLK_XUSB_FS>;
+ clock-names = "dev", "ss", "ss_src", "fs_src";
+ interconnects = <&mc TEGRA234_MEMORY_CLIENT_XUSB_DEVR &emc>,
+ <&mc TEGRA234_MEMORY_CLIENT_XUSB_DEVW &emc>;
+ interconnect-names = "dma-mem", "write";
+ iommus = <&smmu_niso1 TEGRA234_SID_XUSB_DEV>;
+ power-domains = <&bpmp TEGRA234_POWER_DOMAIN_XUSBB>,
+ <&bpmp TEGRA234_POWER_DOMAIN_XUSBA>;
+ power-domain-names = "dev", "ss";
+ nvidia,xusb-padctl = <&xusb_padctl>;
+ dma-coherent;
+ status = "disabled";
+ };
+
+ usb@3610000 {
+ compatible = "nvidia,tegra234-xusb";
+ reg = <0x03610000 0x40000>,
+ <0x03600000 0x10000>,
+ <0x03650000 0x10000>;
+ reg-names = "hcd", "fpci", "bar2";
+
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_HOST>,
+ <&bpmp TEGRA234_CLK_XUSB_FALCON>,
+ <&bpmp TEGRA234_CLK_XUSB_CORE_SS>,
+ <&bpmp TEGRA234_CLK_XUSB_SS>,
+ <&bpmp TEGRA234_CLK_CLK_M>,
+ <&bpmp TEGRA234_CLK_XUSB_FS>,
+ <&bpmp TEGRA234_CLK_UTMIP_PLL>,
+ <&bpmp TEGRA234_CLK_CLK_M>,
+ <&bpmp TEGRA234_CLK_PLLE>;
+ clock-names = "xusb_host", "xusb_falcon_src",
+ "xusb_ss", "xusb_ss_src", "xusb_hs_src",
+ "xusb_fs_src", "pll_u_480m", "clk_m",
+ "pll_e";
+ interconnects = <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+ <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+ interconnect-names = "dma-mem", "write";
+ iommus = <&smmu_niso1 TEGRA234_SID_XUSB_HOST>;
+
+ power-domains = <&bpmp TEGRA234_POWER_DOMAIN_XUSBC>,
+ <&bpmp TEGRA234_POWER_DOMAIN_XUSBA>;
+ power-domain-names = "xusb_host", "xusb_ss";
+
+ nvidia,xusb-padctl = <&xusb_padctl>;
+ dma-coherent;
+ status = "disabled";
+ };
+
fuse@3810000 {
compatible = "nvidia,tegra234-efuse";
reg = <0x03810000 0x10000>;
@@ -1470,6 +1638,8 @@ gen2_i2c: i2c@c240000 {
compatible = "nvidia,tegra194-i2c";
reg = <0xc240000 0x100>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
clock-frequency = <100000>;
clocks = <&bpmp TEGRA234_CLK_I2C2
--
2.25.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 05/13] usb: typec: ucsi_ccg: Add OF support
2022-11-14 12:40 [PATCH v3 00/13] Enable USB host and device functions on Jetson Wayne Chang
` (3 preceding siblings ...)
2022-11-14 12:40 ` [PATCH v3 04/13] arm64: tegra: Enable XUSB host and device on Jetson AGX Orin Wayne Chang
@ 2022-11-14 12:40 ` Wayne Chang
2022-11-15 12:17 ` Jon Hunter
` (2 more replies)
2022-11-14 12:40 ` [PATCH v3 06/13] usb: typec: ucsi_ccg: Add cypress,firmware-build as a well-known regex Wayne Chang
` (8 subsequent siblings)
13 siblings, 3 replies; 40+ messages in thread
From: Wayne Chang @ 2022-11-14 12:40 UTC (permalink / raw)
To: gregkh, robh+dt, krzysztof.kozlowski+dt, treding, jonathanh,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: waynec, linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
The change enables the device tree infrastructure support.
Signed-off-by: Wayne Chang <waynec@nvidia.com>
---
V2 -> V3:nothing has changed
V1 -> V2:nothing has changed
drivers/usb/typec/ucsi/ucsi_ccg.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
index 835f1c4372ba..139707a2f3d6 100644
--- a/drivers/usb/typec/ucsi/ucsi_ccg.c
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -643,7 +643,7 @@ static int ccg_request_irq(struct ucsi_ccg *uc)
{
unsigned long flags = IRQF_ONESHOT;
- if (!has_acpi_companion(uc->dev))
+ if (!dev_fwnode(uc->dev))
flags |= IRQF_TRIGGER_HIGH;
return request_threaded_irq(uc->irq, NULL, ccg_irq_handler, flags, dev_name(uc->dev), uc);
@@ -1427,6 +1427,12 @@ static void ucsi_ccg_remove(struct i2c_client *client)
free_irq(uc->irq, uc);
}
+static const struct of_device_id ucsi_ccg_of_match_table[] = {
+ { .compatible = "cypress,cypd4226", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ucsi_ccg_of_match_table);
+
static const struct i2c_device_id ucsi_ccg_device_id[] = {
{"ccgx-ucsi", 0},
{}
@@ -1481,6 +1487,7 @@ static struct i2c_driver ucsi_ccg_driver = {
.pm = &ucsi_ccg_pm,
.dev_groups = ucsi_ccg_groups,
.acpi_match_table = amd_i2c_ucsi_match,
+ .of_match_table = ucsi_ccg_of_match_table,
},
.probe = ucsi_ccg_probe,
.remove = ucsi_ccg_remove,
--
2.25.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 06/13] usb: typec: ucsi_ccg: Add cypress,firmware-build as a well-known regex
2022-11-14 12:40 [PATCH v3 00/13] Enable USB host and device functions on Jetson Wayne Chang
` (4 preceding siblings ...)
2022-11-14 12:40 ` [PATCH v3 05/13] usb: typec: ucsi_ccg: Add OF support Wayne Chang
@ 2022-11-14 12:40 ` Wayne Chang
2022-11-15 12:18 ` Jon Hunter
2022-11-17 19:45 ` Jon Hunter
2022-11-14 12:40 ` [PATCH v3 07/13] i2c: nvidia-gpu: " Wayne Chang
` (7 subsequent siblings)
13 siblings, 2 replies; 40+ messages in thread
From: Wayne Chang @ 2022-11-14 12:40 UTC (permalink / raw)
To: gregkh, robh+dt, krzysztof.kozlowski+dt, treding, jonathanh,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: waynec, linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
ccgx is refer to the cypress cypd4226 typec controller.
add cypress,firmware-build as a well-known regex.
16-bit value is not sufficient for descriptiva names.
Using string instead of u16 to make it more descriptive.
Signed-off-by: Wayne Chang <waynec@nvidia.com>
---
V2 -> V3:nothing has changed
V1 -> V2:new change added for adding cypress,firmware-build
drivers/usb/typec/ucsi/ucsi_ccg.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
index 139707a2f3d6..e412a457bbfc 100644
--- a/drivers/usb/typec/ucsi/ucsi_ccg.c
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -1343,6 +1343,7 @@ static int ucsi_ccg_probe(struct i2c_client *client,
{
struct device *dev = &client->dev;
struct ucsi_ccg *uc;
+ const char *of_fw_build;
int status;
uc = devm_kzalloc(dev, sizeof(*uc), GFP_KERNEL);
@@ -1363,6 +1364,17 @@ static int ucsi_ccg_probe(struct i2c_client *client,
if (status)
dev_err(uc->dev, "failed to get FW build information\n");
+ status = device_property_read_string(dev, "cypress,firmware-build",
+ &of_fw_build);
+ if (!status) {
+ if (!strcmp(of_fw_build, "nvidia,jetson-agx-xavier"))
+ uc->fw_build = CCG_FW_BUILD_NVIDIA_TEGRA;
+ else if (!strcmp(of_fw_build, "nvidia,gpu"))
+ uc->fw_build = CCG_FW_BUILD_NVIDIA;
+ } else {
+ dev_err(uc->dev, "failed to get FW build information\n");
+ }
+
/* reset ccg device and initialize ucsi */
status = ucsi_ccg_init(uc);
if (status < 0) {
--
2.25.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 07/13] i2c: nvidia-gpu: Add cypress,firmware-build as a well-known regex
2022-11-14 12:40 [PATCH v3 00/13] Enable USB host and device functions on Jetson Wayne Chang
` (5 preceding siblings ...)
2022-11-14 12:40 ` [PATCH v3 06/13] usb: typec: ucsi_ccg: Add cypress,firmware-build as a well-known regex Wayne Chang
@ 2022-11-14 12:40 ` Wayne Chang
2022-11-15 12:18 ` Jon Hunter
2022-11-15 20:52 ` Wolfram Sang
2022-11-14 12:40 ` [PATCH v3 08/13] usb: typec: ucsi_ccg: Remove ccgx,firmware-build property Wayne Chang
` (6 subsequent siblings)
13 siblings, 2 replies; 40+ messages in thread
From: Wayne Chang @ 2022-11-14 12:40 UTC (permalink / raw)
To: gregkh, robh+dt, krzysztof.kozlowski+dt, treding, jonathanh,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: waynec, linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
ccgx is refer to the cypress cypd4226 typec controller.
add cypress,firmware-build as a well-known regex.
16-bit value is not sufficient for descriptiva names.
Using string instead of u16 to make it more descriptive.
Signed-off-by: Wayne Chang <waynec@nvidia.com>
---
V2 -> V3:nothing has changed
V1 -> V2:New change for adding cypress,firmware-build
drivers/i2c/busses/i2c-nvidia-gpu.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c
index 12e330cd7635..9b2e13bd44db 100644
--- a/drivers/i2c/busses/i2c-nvidia-gpu.c
+++ b/drivers/i2c/busses/i2c-nvidia-gpu.c
@@ -261,6 +261,7 @@ MODULE_DEVICE_TABLE(pci, gpu_i2c_ids);
static const struct property_entry ccgx_props[] = {
/* Use FW built for NVIDIA (nv) only */
PROPERTY_ENTRY_U16("ccgx,firmware-build", ('n' << 8) | 'v'),
+ PROPERTY_ENTRY_STRING("cypress,firmware-build", "nvidia,gpu"),
{ }
};
--
2.25.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 08/13] usb: typec: ucsi_ccg: Remove ccgx,firmware-build property
2022-11-14 12:40 [PATCH v3 00/13] Enable USB host and device functions on Jetson Wayne Chang
` (6 preceding siblings ...)
2022-11-14 12:40 ` [PATCH v3 07/13] i2c: nvidia-gpu: " Wayne Chang
@ 2022-11-14 12:40 ` Wayne Chang
2022-11-15 12:19 ` Jon Hunter
2022-11-14 12:40 ` [PATCH v3 09/13] i2c: nvidia-gpu: " Wayne Chang
` (5 subsequent siblings)
13 siblings, 1 reply; 40+ messages in thread
From: Wayne Chang @ 2022-11-14 12:40 UTC (permalink / raw)
To: gregkh, robh+dt, krzysztof.kozlowski+dt, treding, jonathanh,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: waynec, linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
Remove the property ccgx,firmware-build as we have added well-known
regex cypress,firmware-build.
Signed-off-by: Wayne Chang <waynec@nvidia.com>
---
V2 -> V3:nothing has changed
V1 -> V2:nothing has changed
drivers/usb/typec/ucsi/ucsi_ccg.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
index e412a457bbfc..eab3012e1b01 100644
--- a/drivers/usb/typec/ucsi/ucsi_ccg.c
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -1359,11 +1359,6 @@ static int ucsi_ccg_probe(struct i2c_client *client,
INIT_WORK(&uc->pm_work, ccg_pm_workaround_work);
/* Only fail FW flashing when FW build information is not provided */
- status = device_property_read_u16(dev, "ccgx,firmware-build",
- &uc->fw_build);
- if (status)
- dev_err(uc->dev, "failed to get FW build information\n");
-
status = device_property_read_string(dev, "cypress,firmware-build",
&of_fw_build);
if (!status) {
--
2.25.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 09/13] i2c: nvidia-gpu: Remove ccgx,firmware-build property
2022-11-14 12:40 [PATCH v3 00/13] Enable USB host and device functions on Jetson Wayne Chang
` (7 preceding siblings ...)
2022-11-14 12:40 ` [PATCH v3 08/13] usb: typec: ucsi_ccg: Remove ccgx,firmware-build property Wayne Chang
@ 2022-11-14 12:40 ` Wayne Chang
2022-11-15 12:19 ` Jon Hunter
2022-11-15 20:53 ` Wolfram Sang
2022-11-14 12:40 ` [PATCH v3 10/13] phy: tegra: xusb: Disable trk clk when not in use Wayne Chang
` (4 subsequent siblings)
13 siblings, 2 replies; 40+ messages in thread
From: Wayne Chang @ 2022-11-14 12:40 UTC (permalink / raw)
To: gregkh, robh+dt, krzysztof.kozlowski+dt, treding, jonathanh,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: waynec, linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
Remove the property ccgx,firmware-build as we have added well-known
regex cypress,firmware-build.
Signed-off-by: Wayne Chang <waynec@nvidia.com>
---
V2 -> V3:nothing has changed
V1 -> V2:New added for bisectablility
drivers/i2c/busses/i2c-nvidia-gpu.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c
index 9b2e13bd44db..092d4d52098c 100644
--- a/drivers/i2c/busses/i2c-nvidia-gpu.c
+++ b/drivers/i2c/busses/i2c-nvidia-gpu.c
@@ -259,8 +259,7 @@ static const struct pci_device_id gpu_i2c_ids[] = {
MODULE_DEVICE_TABLE(pci, gpu_i2c_ids);
static const struct property_entry ccgx_props[] = {
- /* Use FW built for NVIDIA (nv) only */
- PROPERTY_ENTRY_U16("ccgx,firmware-build", ('n' << 8) | 'v'),
+ /* Use FW built for NVIDIA GPU only */
PROPERTY_ENTRY_STRING("cypress,firmware-build", "nvidia,gpu"),
{ }
};
--
2.25.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 10/13] phy: tegra: xusb: Disable trk clk when not in use
2022-11-14 12:40 [PATCH v3 00/13] Enable USB host and device functions on Jetson Wayne Chang
` (8 preceding siblings ...)
2022-11-14 12:40 ` [PATCH v3 09/13] i2c: nvidia-gpu: " Wayne Chang
@ 2022-11-14 12:40 ` Wayne Chang
2022-11-15 12:19 ` Jon Hunter
2023-01-12 17:23 ` Vinod Koul
2022-11-14 12:40 ` [PATCH v3 11/13] phy: tegra: xusb: Add Tegra234 support Wayne Chang
` (3 subsequent siblings)
13 siblings, 2 replies; 40+ messages in thread
From: Wayne Chang @ 2022-11-14 12:40 UTC (permalink / raw)
To: gregkh, robh+dt, krzysztof.kozlowski+dt, treding, jonathanh,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: waynec, linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
Pad tracking is a one-time calibration for Tegra186 and Tegra194.
Clk should be disabled after calibration.
Disable clk after calibration.
While at it add 100us delay for HW recording the calibration value.
Signed-off-by: Wayne Chang <waynec@nvidia.com>
---
V2 -> V3:nothing has changed
V1 -> V2:update the commit message.
drivers/phy/tegra/xusb-tegra186.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
index 0996ede63387..f121b4ffbbfd 100644
--- a/drivers/phy/tegra/xusb-tegra186.c
+++ b/drivers/phy/tegra/xusb-tegra186.c
@@ -609,6 +609,10 @@ static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl)
value &= ~USB2_PD_TRK;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+ udelay(100);
+
+ clk_disable_unprepare(priv->usb2_trk_clk);
+
mutex_unlock(&padctl->lock);
}
@@ -633,8 +637,6 @@ static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl)
value |= USB2_PD_TRK;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
- clk_disable_unprepare(priv->usb2_trk_clk);
-
mutex_unlock(&padctl->lock);
}
--
2.25.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 11/13] phy: tegra: xusb: Add Tegra234 support
2022-11-14 12:40 [PATCH v3 00/13] Enable USB host and device functions on Jetson Wayne Chang
` (9 preceding siblings ...)
2022-11-14 12:40 ` [PATCH v3 10/13] phy: tegra: xusb: Disable trk clk when not in use Wayne Chang
@ 2022-11-14 12:40 ` Wayne Chang
2022-11-15 12:22 ` Jon Hunter
2022-11-14 12:40 ` [PATCH v3 12/13] usb: host: xhci-tegra: Add Tegra234 XHCI support Wayne Chang
` (2 subsequent siblings)
13 siblings, 1 reply; 40+ messages in thread
From: Wayne Chang @ 2022-11-14 12:40 UTC (permalink / raw)
To: gregkh, robh+dt, krzysztof.kozlowski+dt, treding, jonathanh,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: waynec, linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
From: Sing-Han Chen <singhanc@nvidia.com>
Add support for the XUSB pad controller found on Tegra234 SoCs. It is
mostly similar to the same IP found on Tegra194, because most of
the Tegra234 XUSB PADCTL registers definition and programming sequence
are the same as Tegra194, Tegra234 XUSB PADCTL can share the same
driver with Tegra186 and Tegra194 XUSB PADCTL.
Introduce a new feature, USB2 HW tracking, for Tegra234.
The feature is to enable HW periodical PAD tracking which measure
and capture the electric parameters of USB2.0 PAD.
Signed-off-by: Sing-Han Chen <singhanc@nvidia.com>
Co-developed-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
---
V2 -> V3:nothing has changed
V1 -> V2:remove atomic and the helper in padctl_readl_poll func.
drivers/phy/tegra/Makefile | 1 +
drivers/phy/tegra/xusb-tegra186.c | 64 +++++++++++++++++++++++++++++--
drivers/phy/tegra/xusb.c | 6 +++
drivers/phy/tegra/xusb.h | 22 +++++++++++
4 files changed, 90 insertions(+), 3 deletions(-)
diff --git a/drivers/phy/tegra/Makefile b/drivers/phy/tegra/Makefile
index 89b84067cb4c..eeeea72de117 100644
--- a/drivers/phy/tegra/Makefile
+++ b/drivers/phy/tegra/Makefile
@@ -7,4 +7,5 @@ phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_132_SOC) += xusb-tegra124.o
phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o
phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_186_SOC) += xusb-tegra186.o
phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_194_SOC) += xusb-tegra186.o
+phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_234_SOC) += xusb-tegra186.o
obj-$(CONFIG_PHY_TEGRA194_P2U) += phy-tegra194-p2u.o
diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
index f121b4ffbbfd..5ae3cea19c84 100644
--- a/drivers/phy/tegra/xusb-tegra186.c
+++ b/drivers/phy/tegra/xusb-tegra186.c
@@ -89,6 +89,11 @@
#define USB2_TRK_START_TIMER(x) (((x) & 0x7f) << 12)
#define USB2_TRK_DONE_RESET_TIMER(x) (((x) & 0x7f) << 19)
#define USB2_PD_TRK BIT(26)
+#define USB2_TRK_COMPLETED BIT(31)
+
+#define XUSB_PADCTL_USB2_BIAS_PAD_CTL2 0x28c
+#define USB2_TRK_HW_MODE BIT(0)
+#define CYA_TRK_CODE_UPDATE_ON_IDLE BIT(31)
#define XUSB_PADCTL_HSIC_PADX_CTL0(x) (0x300 + (x) * 0x20)
#define HSIC_PD_TX_DATA0 BIT(1)
@@ -609,9 +614,31 @@ static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl)
value &= ~USB2_PD_TRK;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
- udelay(100);
+ if (padctl->soc->poll_trk_completed) {
+ err = padctl_readl_poll(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1,
+ USB2_TRK_COMPLETED, USB2_TRK_COMPLETED, 100);
+ if (err) {
+ /* The failure with polling on trk complete will not
+ * cause the failure of powering on the bias pad.
+ */
+ dev_warn(dev, "failed to poll USB2 trk completed: %d\n", err);
+ }
- clk_disable_unprepare(priv->usb2_trk_clk);
+ value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+ value |= USB2_TRK_COMPLETED;
+ padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+ } else {
+ udelay(100);
+ }
+
+ if (padctl->soc->trk_hw_mode) {
+ value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL2);
+ value |= USB2_TRK_HW_MODE;
+ value &= ~CYA_TRK_CODE_UPDATE_ON_IDLE;
+ padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL2);
+ } else {
+ clk_disable_unprepare(priv->usb2_trk_clk);
+ }
mutex_unlock(&padctl->lock);
}
@@ -637,6 +664,13 @@ static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl)
value |= USB2_PD_TRK;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+ if (padctl->soc->trk_hw_mode) {
+ value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL2);
+ value &= ~USB2_TRK_HW_MODE;
+ padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL2);
+ clk_disable_unprepare(priv->usb2_trk_clk);
+ }
+
mutex_unlock(&padctl->lock);
}
@@ -1560,7 +1594,8 @@ const struct tegra_xusb_padctl_soc tegra186_xusb_padctl_soc = {
EXPORT_SYMBOL_GPL(tegra186_xusb_padctl_soc);
#endif
-#if IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC)
+#if IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC) || \
+ IS_ENABLED(CONFIG_ARCH_TEGRA_234_SOC)
static const char * const tegra194_xusb_padctl_supply_names[] = {
"avdd-usb",
"vclamp-usb",
@@ -1616,8 +1651,31 @@ const struct tegra_xusb_padctl_soc tegra194_xusb_padctl_soc = {
.supply_names = tegra194_xusb_padctl_supply_names,
.num_supplies = ARRAY_SIZE(tegra194_xusb_padctl_supply_names),
.supports_gen2 = true,
+ .poll_trk_completed = true,
};
EXPORT_SYMBOL_GPL(tegra194_xusb_padctl_soc);
+
+const struct tegra_xusb_padctl_soc tegra234_xusb_padctl_soc = {
+ .num_pads = ARRAY_SIZE(tegra194_pads),
+ .pads = tegra194_pads,
+ .ports = {
+ .usb2 = {
+ .ops = &tegra186_usb2_port_ops,
+ .count = 4,
+ },
+ .usb3 = {
+ .ops = &tegra186_usb3_port_ops,
+ .count = 4,
+ },
+ },
+ .ops = &tegra186_xusb_padctl_ops,
+ .supply_names = tegra194_xusb_padctl_supply_names,
+ .num_supplies = ARRAY_SIZE(tegra194_xusb_padctl_supply_names),
+ .supports_gen2 = true,
+ .poll_trk_completed = true,
+ .trk_hw_mode = true,
+};
+EXPORT_SYMBOL_GPL(tegra234_xusb_padctl_soc);
#endif
MODULE_AUTHOR("JC Kuo <jckuo@nvidia.com>");
diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index dce45fbbd699..c2f160628552 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -71,6 +71,12 @@ static const struct of_device_id tegra_xusb_padctl_of_match[] = {
.compatible = "nvidia,tegra194-xusb-padctl",
.data = &tegra194_xusb_padctl_soc,
},
+#endif
+#if defined(CONFIG_ARCH_TEGRA_234_SOC)
+ {
+ .compatible = "nvidia,tegra234-xusb-padctl",
+ .data = &tegra234_xusb_padctl_soc,
+ },
#endif
{ }
};
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index 8cfbbdbd6e0c..a21826c730d7 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -8,6 +8,7 @@
#define __PHY_TEGRA_XUSB_H
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/mutex.h>
#include <linux/workqueue.h>
@@ -433,6 +434,8 @@ struct tegra_xusb_padctl_soc {
unsigned int num_supplies;
bool supports_gen2;
bool need_fake_usb3_port;
+ bool poll_trk_completed;
+ bool trk_hw_mode;
};
struct tegra_xusb_padctl {
@@ -475,6 +478,22 @@ static inline u32 padctl_readl(struct tegra_xusb_padctl *padctl,
return value;
}
+static inline u32 padctl_readl_poll(struct tegra_xusb_padctl *padctl,
+ unsigned long offset, u32 val, u32 mask, int us)
+{
+ u32 regval;
+ int err;
+
+ err = readl_poll_timeout(padctl->regs + offset, regval,
+ (regval & mask) == val, 1, us);
+ if (err) {
+ dev_err(padctl->dev, "%08lx poll timeout > %08x\n", offset,
+ regval);
+ }
+
+ return err;
+}
+
struct tegra_xusb_lane *tegra_xusb_find_lane(struct tegra_xusb_padctl *padctl,
const char *name,
unsigned int index);
@@ -491,5 +510,8 @@ extern const struct tegra_xusb_padctl_soc tegra186_xusb_padctl_soc;
#if defined(CONFIG_ARCH_TEGRA_194_SOC)
extern const struct tegra_xusb_padctl_soc tegra194_xusb_padctl_soc;
#endif
+#if defined(CONFIG_ARCH_TEGRA_234_SOC)
+extern const struct tegra_xusb_padctl_soc tegra234_xusb_padctl_soc;
+#endif
#endif /* __PHY_TEGRA_XUSB_H */
--
2.25.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 12/13] usb: host: xhci-tegra: Add Tegra234 XHCI support
2022-11-14 12:40 [PATCH v3 00/13] Enable USB host and device functions on Jetson Wayne Chang
` (10 preceding siblings ...)
2022-11-14 12:40 ` [PATCH v3 11/13] phy: tegra: xusb: Add Tegra234 support Wayne Chang
@ 2022-11-14 12:40 ` Wayne Chang
2022-11-15 12:23 ` Jon Hunter
2022-11-14 12:40 ` [PATCH v3 13/13] usb: gadget: tegra-xudc: Add Tegra234 support Wayne Chang
2022-11-18 15:44 ` [PATCH v3 00/13] Enable USB host and device functions on Jetson Jon Hunter
13 siblings, 1 reply; 40+ messages in thread
From: Wayne Chang @ 2022-11-14 12:40 UTC (permalink / raw)
To: gregkh, robh+dt, krzysztof.kozlowski+dt, treding, jonathanh,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: waynec, linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
From: Sing-Han Chen <singhanc@nvidia.com>
This change adds Tegra234 XUSB host mode controller support.
In Tegra234, some of the registers have moved to bar2 space.
The new soc variable has_bar2 indicates the chip with bar2
area. This patch adds new reg helper to let the driver reuse
the same code for those chips with bar2 support.
Signed-off-by: Sing-Han Chen <singhanc@nvidia.com>
Co-developed-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
---
V2 -> V3:nothing has changed
V1 -> V2:fix some issues on coding style
extract tegra_xusb_load_firmware function
refine has_bar2 and remove has_ifr/firmware on Tegra234
drivers/usb/host/xhci-tegra.c | 270 +++++++++++++++++++++++++++++-----
1 file changed, 232 insertions(+), 38 deletions(-)
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index bdb776553826..b2f07eae2c93 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -44,6 +44,9 @@
#define XUSB_CFG_4 0x010
#define XUSB_BASE_ADDR_SHIFT 15
#define XUSB_BASE_ADDR_MASK 0x1ffff
+#define XUSB_CFG_7 0x01c
+#define XUSB_BASE2_ADDR_SHIFT 16
+#define XUSB_BASE2_ADDR_MASK 0xffff
#define XUSB_CFG_16 0x040
#define XUSB_CFG_24 0x060
#define XUSB_CFG_AXI_CFG 0x0f8
@@ -75,6 +78,20 @@
#define MBOX_SMI_INTR_FW_HANG BIT(1)
#define MBOX_SMI_INTR_EN BIT(3)
+/* BAR2 registers */
+#define XUSB_BAR2_ARU_MBOX_CMD 0x004
+#define XUSB_BAR2_ARU_MBOX_DATA_IN 0x008
+#define XUSB_BAR2_ARU_MBOX_DATA_OUT 0x00c
+#define XUSB_BAR2_ARU_MBOX_OWNER 0x010
+#define XUSB_BAR2_ARU_SMI_INTR 0x014
+#define XUSB_BAR2_ARU_SMI_ARU_FW_SCRATCH_DATA0 0x01c
+#define XUSB_BAR2_ARU_IFRDMA_CFG0 0x0e0
+#define XUSB_BAR2_ARU_IFRDMA_CFG1 0x0e4
+#define XUSB_BAR2_ARU_IFRDMA_STREAMID_FIELD 0x0e8
+#define XUSB_BAR2_ARU_C11_CSBRANGE 0x9c
+#define XUSB_BAR2_ARU_FW_SCRATCH 0x1000
+#define XUSB_BAR2_CSB_BASE_ADDR 0x2000
+
/* IPFS registers */
#define IPFS_XUSB_HOST_MSI_BAR_SZ_0 0x0c0
#define IPFS_XUSB_HOST_MSI_AXI_BAR_ST_0 0x0c4
@@ -111,6 +128,9 @@
#define IMFILLRNG1_TAG_HI_SHIFT 16
#define XUSB_FALC_IMFILLCTL 0x158
+/* CSB ARU registers */
+#define XUSB_CSB_ARU_SCRATCH0 0x100100
+
/* MP CSB registers */
#define XUSB_CSB_MP_ILOAD_ATTR 0x101a00
#define XUSB_CSB_MP_ILOAD_BASE_LO 0x101a04
@@ -131,6 +151,9 @@
#define IMEM_BLOCK_SIZE 256
+#define FW_IOCTL_TYPE_SHIFT 24
+#define FW_IOCTL_CFGTBL_READ 17
+
struct tegra_xusb_fw_header {
__le32 boot_loadaddr_in_imem;
__le32 boot_codedfi_offset;
@@ -175,6 +198,7 @@ struct tegra_xusb_mbox_regs {
u16 data_in;
u16 data_out;
u16 owner;
+ u16 smi_intr;
};
struct tegra_xusb_context_soc {
@@ -189,6 +213,18 @@ struct tegra_xusb_context_soc {
} fpci;
};
+struct tegra_xusb;
+struct tegra_xusb_soc_ops {
+ u32 (*mbox_reg_readl)(struct tegra_xusb *tegra,
+ unsigned int offset);
+ void (*mbox_reg_writel)(struct tegra_xusb *tegra,
+ u32 value, unsigned int offset);
+ u32 (*csb_reg_readl)(struct tegra_xusb *tegra,
+ unsigned int offset);
+ void (*csb_reg_writel)(struct tegra_xusb *tegra,
+ u32 value, unsigned int offset);
+};
+
struct tegra_xusb_soc {
const char *firmware;
const char * const *supply_names;
@@ -205,11 +241,14 @@ struct tegra_xusb_soc {
} ports;
struct tegra_xusb_mbox_regs mbox;
+ const struct tegra_xusb_soc_ops *ops;
bool scale_ss_clock;
bool has_ipfs;
bool lpm_support;
bool otg_reset_sspi;
+
+ bool has_bar2;
};
struct tegra_xusb_context {
@@ -230,6 +269,8 @@ struct tegra_xusb {
void __iomem *ipfs_base;
void __iomem *fpci_base;
+ void __iomem *bar2_base;
+ struct resource *bar2;
const struct tegra_xusb_soc *soc;
@@ -300,7 +341,33 @@ static inline void ipfs_writel(struct tegra_xusb *tegra, u32 value,
writel(value, tegra->ipfs_base + offset);
}
+static inline u32 bar2_readl(struct tegra_xusb *tegra, unsigned int offset)
+{
+ return readl(tegra->bar2_base + offset);
+}
+
+static inline void bar2_writel(struct tegra_xusb *tegra, u32 value,
+ unsigned int offset)
+{
+ writel(value, tegra->bar2_base + offset);
+}
+
static u32 csb_readl(struct tegra_xusb *tegra, unsigned int offset)
+{
+ const struct tegra_xusb_soc_ops *ops = tegra->soc->ops;
+
+ return ops->csb_reg_readl(tegra, offset);
+}
+
+static void csb_writel(struct tegra_xusb *tegra, u32 value,
+ unsigned int offset)
+{
+ const struct tegra_xusb_soc_ops *ops = tegra->soc->ops;
+
+ ops->csb_reg_writel(tegra, value, offset);
+}
+
+static u32 fpci_csb_readl(struct tegra_xusb *tegra, unsigned int offset)
{
u32 page = CSB_PAGE_SELECT(offset);
u32 ofs = CSB_PAGE_OFFSET(offset);
@@ -310,7 +377,7 @@ static u32 csb_readl(struct tegra_xusb *tegra, unsigned int offset)
return fpci_readl(tegra, XUSB_CFG_CSB_BASE_ADDR + ofs);
}
-static void csb_writel(struct tegra_xusb *tegra, u32 value,
+static void fpci_csb_writel(struct tegra_xusb *tegra, u32 value,
unsigned int offset)
{
u32 page = CSB_PAGE_SELECT(offset);
@@ -320,6 +387,26 @@ static void csb_writel(struct tegra_xusb *tegra, u32 value,
fpci_writel(tegra, value, XUSB_CFG_CSB_BASE_ADDR + ofs);
}
+static u32 bar2_csb_readl(struct tegra_xusb *tegra, unsigned int offset)
+{
+ u32 page = CSB_PAGE_SELECT(offset);
+ u32 ofs = CSB_PAGE_OFFSET(offset);
+
+ bar2_writel(tegra, page, XUSB_BAR2_ARU_C11_CSBRANGE);
+
+ return bar2_readl(tegra, XUSB_BAR2_CSB_BASE_ADDR + ofs);
+}
+
+static void bar2_csb_writel(struct tegra_xusb *tegra, u32 value,
+ unsigned int offset)
+{
+ u32 page = CSB_PAGE_SELECT(offset);
+ u32 ofs = CSB_PAGE_OFFSET(offset);
+
+ bar2_writel(tegra, page, XUSB_BAR2_ARU_C11_CSBRANGE);
+ bar2_writel(tegra, value, XUSB_BAR2_CSB_BASE_ADDR + ofs);
+}
+
static int tegra_xusb_set_ss_clk(struct tegra_xusb *tegra,
unsigned long rate)
{
@@ -451,6 +538,7 @@ static bool tegra_xusb_mbox_cmd_requires_ack(enum tegra_xusb_mbox_cmd cmd)
static int tegra_xusb_mbox_send(struct tegra_xusb *tegra,
const struct tegra_xusb_mbox_msg *msg)
{
+ const struct tegra_xusb_soc_ops *ops = tegra->soc->ops;
bool wait_for_idle = false;
u32 value;
@@ -459,15 +547,15 @@ static int tegra_xusb_mbox_send(struct tegra_xusb *tegra,
* ACK/NAK messages.
*/
if (!(msg->cmd == MBOX_CMD_ACK || msg->cmd == MBOX_CMD_NAK)) {
- value = fpci_readl(tegra, tegra->soc->mbox.owner);
+ value = ops->mbox_reg_readl(tegra, tegra->soc->mbox.owner);
if (value != MBOX_OWNER_NONE) {
dev_err(tegra->dev, "mailbox is busy\n");
return -EBUSY;
}
- fpci_writel(tegra, MBOX_OWNER_SW, tegra->soc->mbox.owner);
+ ops->mbox_reg_writel(tegra, MBOX_OWNER_SW, tegra->soc->mbox.owner);
- value = fpci_readl(tegra, tegra->soc->mbox.owner);
+ value = ops->mbox_reg_readl(tegra, tegra->soc->mbox.owner);
if (value != MBOX_OWNER_SW) {
dev_err(tegra->dev, "failed to acquire mailbox\n");
return -EBUSY;
@@ -477,17 +565,17 @@ static int tegra_xusb_mbox_send(struct tegra_xusb *tegra,
}
value = tegra_xusb_mbox_pack(msg);
- fpci_writel(tegra, value, tegra->soc->mbox.data_in);
+ ops->mbox_reg_writel(tegra, value, tegra->soc->mbox.data_in);
- value = fpci_readl(tegra, tegra->soc->mbox.cmd);
+ value = ops->mbox_reg_readl(tegra, tegra->soc->mbox.cmd);
value |= MBOX_INT_EN | MBOX_DEST_FALC;
- fpci_writel(tegra, value, tegra->soc->mbox.cmd);
+ ops->mbox_reg_writel(tegra, value, tegra->soc->mbox.cmd);
if (wait_for_idle) {
unsigned long timeout = jiffies + msecs_to_jiffies(250);
while (time_before(jiffies, timeout)) {
- value = fpci_readl(tegra, tegra->soc->mbox.owner);
+ value = ops->mbox_reg_readl(tegra, tegra->soc->mbox.owner);
if (value == MBOX_OWNER_NONE)
break;
@@ -495,7 +583,7 @@ static int tegra_xusb_mbox_send(struct tegra_xusb *tegra,
}
if (time_after(jiffies, timeout))
- value = fpci_readl(tegra, tegra->soc->mbox.owner);
+ value = ops->mbox_reg_readl(tegra, tegra->soc->mbox.owner);
if (value != MBOX_OWNER_NONE)
return -ETIMEDOUT;
@@ -507,11 +595,12 @@ static int tegra_xusb_mbox_send(struct tegra_xusb *tegra,
static irqreturn_t tegra_xusb_mbox_irq(int irq, void *data)
{
struct tegra_xusb *tegra = data;
+ const struct tegra_xusb_soc_ops *ops = tegra->soc->ops;
u32 value;
/* clear mailbox interrupts */
- value = fpci_readl(tegra, XUSB_CFG_ARU_SMI_INTR);
- fpci_writel(tegra, value, XUSB_CFG_ARU_SMI_INTR);
+ value = ops->mbox_reg_readl(tegra, tegra->soc->mbox.smi_intr);
+ ops->mbox_reg_writel(tegra, value, tegra->soc->mbox.smi_intr);
if (value & MBOX_SMI_INTR_FW_HANG)
dev_err(tegra->dev, "controller firmware hang\n");
@@ -664,6 +753,7 @@ static void tegra_xusb_mbox_handle(struct tegra_xusb *tegra,
static irqreturn_t tegra_xusb_mbox_thread(int irq, void *data)
{
struct tegra_xusb *tegra = data;
+ const struct tegra_xusb_soc_ops *ops = tegra->soc->ops;
struct tegra_xusb_mbox_msg msg;
u32 value;
@@ -672,16 +762,16 @@ static irqreturn_t tegra_xusb_mbox_thread(int irq, void *data)
if (pm_runtime_suspended(tegra->dev) || tegra->suspended)
goto out;
- value = fpci_readl(tegra, tegra->soc->mbox.data_out);
+ value = ops->mbox_reg_readl(tegra, tegra->soc->mbox.data_out);
tegra_xusb_mbox_unpack(&msg, value);
- value = fpci_readl(tegra, tegra->soc->mbox.cmd);
+ value = ops->mbox_reg_readl(tegra, tegra->soc->mbox.cmd);
value &= ~MBOX_DEST_SMI;
- fpci_writel(tegra, value, tegra->soc->mbox.cmd);
+ ops->mbox_reg_writel(tegra, value, tegra->soc->mbox.cmd);
/* clear mailbox owner if no ACK/NAK is required */
if (!tegra_xusb_mbox_cmd_requires_ack(msg.cmd))
- fpci_writel(tegra, MBOX_OWNER_NONE, tegra->soc->mbox.owner);
+ ops->mbox_reg_writel(tegra, MBOX_OWNER_NONE, tegra->soc->mbox.owner);
tegra_xusb_mbox_handle(tegra, &msg);
@@ -709,6 +799,15 @@ static void tegra_xusb_config(struct tegra_xusb *tegra)
value |= regs & (XUSB_BASE_ADDR_MASK << XUSB_BASE_ADDR_SHIFT);
fpci_writel(tegra, value, XUSB_CFG_4);
+ /* Program BAR2 space */
+ if (tegra->bar2) {
+ value = fpci_readl(tegra, XUSB_CFG_7);
+ value &= ~(XUSB_BASE2_ADDR_MASK << XUSB_BASE2_ADDR_SHIFT);
+ value |= tegra->bar2->start &
+ (XUSB_BASE2_ADDR_MASK << XUSB_BASE2_ADDR_SHIFT);
+ fpci_writel(tegra, value, XUSB_CFG_7);
+ }
+
usleep_range(100, 200);
/* Enable bus master */
@@ -881,21 +980,36 @@ static int tegra_xusb_request_firmware(struct tegra_xusb *tegra)
return 0;
}
-static int tegra_xusb_load_firmware(struct tegra_xusb *tegra)
+static int tegra_xusb_wait_for_falcon(struct tegra_xusb *tegra)
+{
+ struct xhci_cap_regs __iomem *cap_regs;
+ struct xhci_op_regs __iomem *op_regs;
+ int ret;
+ u32 value;
+
+ cap_regs = tegra->regs;
+ op_regs = tegra->regs + HC_LENGTH(readl(&cap_regs->hc_capbase));
+
+ ret = readl_poll_timeout(&op_regs->status, value, !(value & STS_CNR), 1000, 200000);
+
+ if (ret)
+ dev_err(tegra->dev, "XHCI Controller not ready. Falcon state: 0x%x\n",
+ csb_readl(tegra, XUSB_FALC_CPUCTL));
+
+ return ret;
+}
+
+static int tegra_xusb_load_firmware_rom(struct tegra_xusb *tegra)
{
unsigned int code_tag_blocks, code_size_blocks, code_blocks;
- struct xhci_cap_regs __iomem *cap = tegra->regs;
struct tegra_xusb_fw_header *header;
struct device *dev = tegra->dev;
- struct xhci_op_regs __iomem *op;
- unsigned long timeout;
time64_t timestamp;
u64 address;
u32 value;
int err;
header = (struct tegra_xusb_fw_header *)tegra->fw.virt;
- op = tegra->regs + HC_LENGTH(readl(&cap->hc_capbase));
if (csb_readl(tegra, XUSB_CSB_MP_ILOAD_BASE_LO) != 0) {
dev_info(dev, "Firmware already loaded, Falcon state %#x\n",
@@ -968,30 +1082,55 @@ static int tegra_xusb_load_firmware(struct tegra_xusb *tegra)
/* Boot Falcon CPU and wait for USBSTS_CNR to get cleared. */
csb_writel(tegra, CPUCTL_STARTCPU, XUSB_FALC_CPUCTL);
- timeout = jiffies + msecs_to_jiffies(200);
+ if (tegra_xusb_wait_for_falcon(tegra))
+ return -EIO;
+
+ timestamp = le32_to_cpu(header->fwimg_created_time);
- do {
- value = readl(&op->status);
- if ((value & STS_CNR) == 0)
- break;
+ dev_info(dev, "Firmware timestamp: %ptTs UTC\n", ×tamp);
+
+ return 0;
+}
+
+static u32 tegra_xusb_read_firmware_header(struct tegra_xusb *tegra, u32 offset)
+{
+ /*
+ * We only accept reading the firmware config table
+ * The offset should not exceed the fw header structure
+ */
+ if (offset >= sizeof(struct tegra_xusb_fw_header))
+ return 0;
- usleep_range(1000, 2000);
- } while (time_is_after_jiffies(timeout));
+ bar2_writel(tegra, (FW_IOCTL_CFGTBL_READ << FW_IOCTL_TYPE_SHIFT) | offset,
+ XUSB_BAR2_ARU_FW_SCRATCH);
+ return bar2_readl(tegra, XUSB_BAR2_ARU_SMI_ARU_FW_SCRATCH_DATA0);
+}
+
+static int tegra_xusb_init_ifr_firmware(struct tegra_xusb *tegra)
+{
+ time64_t timestamp;
- value = readl(&op->status);
- if (value & STS_CNR) {
- value = csb_readl(tegra, XUSB_FALC_CPUCTL);
- dev_err(dev, "XHCI controller not read: %#010x\n", value);
+ if (tegra_xusb_wait_for_falcon(tegra))
return -EIO;
- }
- timestamp = le32_to_cpu(header->fwimg_created_time);
+#define offsetof_32(X, Y) ((u8)(offsetof(X, Y) / sizeof(__le32)))
+ timestamp = tegra_xusb_read_firmware_header(tegra,
+ offsetof_32(struct tegra_xusb_fw_header,
+ fwimg_created_time) << 2);
- dev_info(dev, "Firmware timestamp: %ptTs UTC\n", ×tamp);
+ dev_info(tegra->dev, "Firmware timestamp: %ptTs UTC\n", ×tamp);
return 0;
}
+static int tegra_xusb_load_firmware(struct tegra_xusb *tegra)
+{
+ if (!tegra->soc->firmware)
+ return tegra_xusb_init_ifr_firmware(tegra);
+ else
+ return tegra_xusb_load_firmware_rom(tegra);
+}
+
static void tegra_xusb_powerdomain_remove(struct device *dev,
struct tegra_xusb *tegra)
{
@@ -1435,6 +1574,10 @@ static int tegra_xusb_probe(struct platform_device *pdev)
tegra->ipfs_base = devm_platform_ioremap_resource(pdev, 2);
if (IS_ERR(tegra->ipfs_base))
return PTR_ERR(tegra->ipfs_base);
+ } else if (tegra->soc->has_bar2) {
+ tegra->bar2_base = devm_platform_get_and_ioremap_resource(pdev, 2, &tegra->bar2);
+ if (IS_ERR(tegra->bar2_base))
+ return PTR_ERR(tegra->bar2_base);
}
tegra->xhci_irq = platform_get_irq(pdev, 0);
@@ -1651,10 +1794,13 @@ static int tegra_xusb_probe(struct platform_device *pdev)
goto disable_phy;
}
- err = tegra_xusb_request_firmware(tegra);
- if (err < 0) {
- dev_err(&pdev->dev, "failed to request firmware: %d\n", err);
- goto disable_phy;
+ if (tegra->soc->firmware) {
+ err = tegra_xusb_request_firmware(tegra);
+ if (err < 0) {
+ dev_err(&pdev->dev,
+ "failed to request firmware: %d\n", err);
+ goto disable_phy;
+ }
}
err = tegra_xusb_unpowergate_partitions(tegra);
@@ -2271,6 +2417,13 @@ static const struct tegra_xusb_context_soc tegra124_xusb_context = {
},
};
+static const struct tegra_xusb_soc_ops tegra124_ops = {
+ .mbox_reg_readl = &fpci_readl,
+ .mbox_reg_writel = &fpci_writel,
+ .csb_reg_readl = &fpci_csb_readl,
+ .csb_reg_writel = &fpci_csb_writel,
+};
+
static const struct tegra_xusb_soc tegra124_soc = {
.firmware = "nvidia/tegra124/xusb.bin",
.supply_names = tegra124_supply_names,
@@ -2286,11 +2439,13 @@ static const struct tegra_xusb_soc tegra124_soc = {
.scale_ss_clock = true,
.has_ipfs = true,
.otg_reset_sspi = false,
+ .ops = &tegra124_ops,
.mbox = {
.cmd = 0xe4,
.data_in = 0xe8,
.data_out = 0xec,
.owner = 0xf0,
+ .smi_intr = XUSB_CFG_ARU_SMI_INTR,
},
};
MODULE_FIRMWARE("nvidia/tegra124/xusb.bin");
@@ -2322,11 +2477,13 @@ static const struct tegra_xusb_soc tegra210_soc = {
.scale_ss_clock = false,
.has_ipfs = true,
.otg_reset_sspi = true,
+ .ops = &tegra124_ops,
.mbox = {
.cmd = 0xe4,
.data_in = 0xe8,
.data_out = 0xec,
.owner = 0xf0,
+ .smi_intr = XUSB_CFG_ARU_SMI_INTR,
},
};
MODULE_FIRMWARE("nvidia/tegra210/xusb.bin");
@@ -2363,11 +2520,13 @@ static const struct tegra_xusb_soc tegra186_soc = {
.scale_ss_clock = false,
.has_ipfs = false,
.otg_reset_sspi = false,
+ .ops = &tegra124_ops,
.mbox = {
.cmd = 0xe4,
.data_in = 0xe8,
.data_out = 0xec,
.owner = 0xf0,
+ .smi_intr = XUSB_CFG_ARU_SMI_INTR,
},
.lpm_support = true,
};
@@ -2394,21 +2553,56 @@ static const struct tegra_xusb_soc tegra194_soc = {
.scale_ss_clock = false,
.has_ipfs = false,
.otg_reset_sspi = false,
+ .ops = &tegra124_ops,
.mbox = {
.cmd = 0x68,
.data_in = 0x6c,
.data_out = 0x70,
.owner = 0x74,
+ .smi_intr = XUSB_CFG_ARU_SMI_INTR,
},
.lpm_support = true,
};
MODULE_FIRMWARE("nvidia/tegra194/xusb.bin");
+static const struct tegra_xusb_soc_ops tegra234_ops = {
+ .mbox_reg_readl = &bar2_readl,
+ .mbox_reg_writel = &bar2_writel,
+ .csb_reg_readl = &bar2_csb_readl,
+ .csb_reg_writel = &bar2_csb_writel,
+};
+
+static const struct tegra_xusb_soc tegra234_soc = {
+ .supply_names = tegra194_supply_names,
+ .num_supplies = ARRAY_SIZE(tegra194_supply_names),
+ .phy_types = tegra194_phy_types,
+ .num_types = ARRAY_SIZE(tegra194_phy_types),
+ .context = &tegra186_xusb_context,
+ .ports = {
+ .usb3 = { .offset = 0, .count = 4, },
+ .usb2 = { .offset = 4, .count = 4, },
+ },
+ .scale_ss_clock = false,
+ .has_ipfs = false,
+ .otg_reset_sspi = false,
+ .ops = &tegra234_ops,
+ .mbox = {
+ .cmd = XUSB_BAR2_ARU_MBOX_CMD,
+ .data_in = XUSB_BAR2_ARU_MBOX_DATA_IN,
+ .data_out = XUSB_BAR2_ARU_MBOX_DATA_OUT,
+ .owner = XUSB_BAR2_ARU_MBOX_OWNER,
+ .smi_intr = XUSB_BAR2_ARU_SMI_INTR,
+ },
+ .lpm_support = true,
+ .has_bar2 = true,
+};
+
static const struct of_device_id tegra_xusb_of_match[] = {
{ .compatible = "nvidia,tegra124-xusb", .data = &tegra124_soc },
{ .compatible = "nvidia,tegra210-xusb", .data = &tegra210_soc },
{ .compatible = "nvidia,tegra186-xusb", .data = &tegra186_soc },
{ .compatible = "nvidia,tegra194-xusb", .data = &tegra194_soc },
+ { .compatible = "nvidia,tegra234-xusb", .data = &tegra234_soc },
{ },
};
MODULE_DEVICE_TABLE(of, tegra_xusb_of_match);
--
2.25.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 13/13] usb: gadget: tegra-xudc: Add Tegra234 support
2022-11-14 12:40 [PATCH v3 00/13] Enable USB host and device functions on Jetson Wayne Chang
` (11 preceding siblings ...)
2022-11-14 12:40 ` [PATCH v3 12/13] usb: host: xhci-tegra: Add Tegra234 XHCI support Wayne Chang
@ 2022-11-14 12:40 ` Wayne Chang
2022-11-15 12:23 ` Jon Hunter
2022-11-18 15:44 ` [PATCH v3 00/13] Enable USB host and device functions on Jetson Jon Hunter
13 siblings, 1 reply; 40+ messages in thread
From: Wayne Chang @ 2022-11-14 12:40 UTC (permalink / raw)
To: gregkh, robh+dt, krzysztof.kozlowski+dt, treding, jonathanh,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: waynec, linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
From: Sing-Han Chen <singhanc@nvidia.com>
This commit adds support for XUSB device mode controller support on
Tegra234 SoC. This is very similar to the existing Tegra194 XUDC.
Signed-off-by: Sing-Han Chen <singhanc@nvidia.com>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
---
V2 -> V3:nothing has changed
V1 -> V2:nothing has changed
drivers/usb/gadget/udc/tegra-xudc.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c
index 76919d7570d2..ff697190469b 100644
--- a/drivers/usb/gadget/udc/tegra-xudc.c
+++ b/drivers/usb/gadget/udc/tegra-xudc.c
@@ -3660,6 +3660,19 @@ static struct tegra_xudc_soc tegra194_xudc_soc_data = {
.has_ipfs = false,
};
+static struct tegra_xudc_soc tegra234_xudc_soc_data = {
+ .clock_names = tegra186_xudc_clock_names,
+ .num_clks = ARRAY_SIZE(tegra186_xudc_clock_names),
+ .num_phys = 4,
+ .u1_enable = true,
+ .u2_enable = true,
+ .lpm_enable = true,
+ .invalid_seq_num = false,
+ .pls_quirk = false,
+ .port_reset_quirk = false,
+ .has_ipfs = false,
+};
+
static const struct of_device_id tegra_xudc_of_match[] = {
{
.compatible = "nvidia,tegra210-xudc",
@@ -3673,6 +3686,10 @@ static const struct of_device_id tegra_xudc_of_match[] = {
.compatible = "nvidia,tegra194-xudc",
.data = &tegra194_xudc_soc_data
},
+ {
+ .compatible = "nvidia,tegra234-xudc",
+ .data = &tegra234_xudc_soc_data
+ },
{ }
};
MODULE_DEVICE_TABLE(of, tegra_xudc_of_match);
--
2.25.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* Re: [PATCH v3 02/13] dt-bindings: usb: Add NVIDIA Tegra234 XUSB host controller binding
2022-11-14 12:40 ` [PATCH v3 02/13] dt-bindings: usb: Add NVIDIA Tegra234 XUSB host controller binding Wayne Chang
@ 2022-11-14 19:16 ` Rob Herring
2022-11-18 11:47 ` Jon Hunter
2022-11-15 12:14 ` Jon Hunter
1 sibling, 1 reply; 40+ messages in thread
From: Rob Herring @ 2022-11-14 19:16 UTC (permalink / raw)
To: Wayne Chang
Cc: linux-kernel, ajayg, singhanc, devicetree, thierry.reding,
treding, linux-tegra, krzysztof.kozlowski+dt, linux-i2c,
linux-phy, linux-usb, robh+dt, jckuo, heikki.krogerus, gregkh,
jonathanh, vkoul, balbi, p.zabel, mathias.nyman
On Mon, 14 Nov 2022 20:40:42 +0800, Wayne Chang wrote:
> Add device-tree binding documentation for the XUSB host controller present
> on Tegra234 SoC. This controller supports the USB 3.1 specification.
>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
> ---
> depends on the following change
> https://lore.kernel.org/all/20221003125141.123759-1-jonathanh@nvidia.com/
> V2 -> V3:nothing has changed but added the dependency here
> V1 -> V2:new change for adding nvidia,tegra234-xusb.yaml
> .../bindings/usb/nvidia,tegra234-xusb.yaml | 159 ++++++++++++++++++
> 1 file changed, 159 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Error: Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.example.dts:36.27-28 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:406: Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.example.dtb] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1492: dt_binding_check] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 01/13] dt-bindings: usb: tegra-xudc: Add Tegra234 XUSB controller support
2022-11-14 12:40 ` [PATCH v3 01/13] dt-bindings: usb: tegra-xudc: Add Tegra234 XUSB controller support Wayne Chang
@ 2022-11-15 12:14 ` Jon Hunter
2022-11-16 21:05 ` Rob Herring
1 sibling, 0 replies; 40+ messages in thread
From: Jon Hunter @ 2022-11-15 12:14 UTC (permalink / raw)
To: Wayne Chang, gregkh, robh+dt, krzysztof.kozlowski+dt, treding,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
On 14/11/2022 12:40, Wayne Chang wrote:
> Extend the Tegra XUSB controller device tree binding with Tegra234
> support.
>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
> ---
> V2 -> V3:nothing has changed
> V1 -> V2:address the issue on phy-names property
> .../bindings/usb/nvidia,tegra-xudc.yaml | 24 ++++++++++++-------
> 1 file changed, 16 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
> index fd6e7c81426e..52488a731c4e 100644
> --- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
> +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
> @@ -22,6 +22,7 @@ properties:
> - nvidia,tegra210-xudc # For Tegra210
> - nvidia,tegra186-xudc # For Tegra186
> - nvidia,tegra194-xudc # For Tegra194
> + - nvidia,tegra234-xudc # For Tegra234
>
> reg:
> minItems: 2
> @@ -90,21 +91,27 @@ properties:
>
> phys:
> minItems: 1
> + maxItems: 8
> description:
> Must contain an entry for each entry in phy-names.
> See ../phy/phy-bindings.txt for details.
>
> phy-names:
> minItems: 1
> + maxItems: 8
> items:
> - - const: usb2-0
> - - const: usb2-1
> - - const: usb2-2
> - - const: usb2-3
> - - const: usb3-0
> - - const: usb3-1
> - - const: usb3-2
> - - const: usb3-3
> + enum:
> + - usb2-0
> + - usb2-1
> + - usb2-2
> + - usb2-3
> + - usb3-0
> + - usb3-1
> + - usb3-2
> + - usb3-3
> +
> + dma-coherent:
> + type: boolean
>
> avddio-usb-supply:
> description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
> @@ -153,6 +160,7 @@ allOf:
> enum:
> - nvidia,tegra186-xudc
> - nvidia,tegra194-xudc
> + - nvidia,tegra234-xudc
> then:
> properties:
> reg:
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Thanks
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 02/13] dt-bindings: usb: Add NVIDIA Tegra234 XUSB host controller binding
2022-11-14 12:40 ` [PATCH v3 02/13] dt-bindings: usb: Add NVIDIA Tegra234 XUSB host controller binding Wayne Chang
2022-11-14 19:16 ` Rob Herring
@ 2022-11-15 12:14 ` Jon Hunter
1 sibling, 0 replies; 40+ messages in thread
From: Jon Hunter @ 2022-11-15 12:14 UTC (permalink / raw)
To: Wayne Chang, gregkh, robh+dt, krzysztof.kozlowski+dt, treding,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
On 14/11/2022 12:40, Wayne Chang wrote:
> Add device-tree binding documentation for the XUSB host controller present
> on Tegra234 SoC. This controller supports the USB 3.1 specification.
>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
> ---
> depends on the following change
> https://lore.kernel.org/all/20221003125141.123759-1-jonathanh@nvidia.com/
> V2 -> V3:nothing has changed but added the dependency here
> V1 -> V2:new change for adding nvidia,tegra234-xusb.yaml
> .../bindings/usb/nvidia,tegra234-xusb.yaml | 159 ++++++++++++++++++
> 1 file changed, 159 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml
>
> diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml
> new file mode 100644
> index 000000000000..d78ee88ed208
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml
> @@ -0,0 +1,159 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/nvidia,tegra234-xusb.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NVIDIA Tegra234 xHCI controller
> +
> +maintainers:
> + - Thierry Reding <thierry.reding@gmail.com>
> + - Jon Hunter <jonathanh@nvidia.com>
> +
> +description: The Tegra xHCI controller supports both USB2 and USB3 interfaces
> + exposed by the Tegra XUSB pad controller.
> +
> +properties:
> + compatible:
> + const: nvidia,tegra234-xusb
> +
> + reg:
> + items:
> + - description: base and length of the xHCI host registers
> + - description: base and length of the XUSB FPCI registers
> + - description: base and length of the XUSB bar2 registers
> +
> + reg-names:
> + items:
> + - const: hcd
> + - const: fpci
> + - const: bar2
> +
> + interrupts:
> + items:
> + - description: xHCI host interrupt
> + - description: mailbox interrupt
> +
> + clocks:
> + items:
> + - description: XUSB host clock
> + - description: XUSB Falcon source clock
> + - description: XUSB SuperSpeed clock
> + - description: XUSB SuperSpeed source clock
> + - description: XUSB HighSpeed clock source
> + - description: XUSB FullSpeed clock source
> + - description: USB PLL
> + - description: reference clock
> + - description: I/O PLL
> +
> + clock-names:
> + items:
> + - const: xusb_host
> + - const: xusb_falcon_src
> + - const: xusb_ss
> + - const: xusb_ss_src
> + - const: xusb_hs_src
> + - const: xusb_fs_src
> + - const: pll_u_480m
> + - const: clk_m
> + - const: pll_e
> +
> + interconnects:
> + items:
> + - description: read client
> + - description: write client
> +
> + interconnect-names:
> + items:
> + - const: dma-mem # read
> + - const: write
> +
> + iommus:
> + maxItems: 1
> +
> + nvidia,xusb-padctl:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: phandle to the XUSB pad controller that is used to configure
> + the USB pads used by the XHCI controller
> +
> + phys:
> + minItems: 1
> + maxItems: 8
> +
> + phy-names:
> + minItems: 1
> + maxItems: 8
> + items:
> + enum:
> + - usb2-0
> + - usb2-1
> + - usb2-2
> + - usb2-3
> + - usb3-0
> + - usb3-1
> + - usb3-2
> + - usb3-3
> +
> + power-domains:
> + items:
> + - description: XUSBC power domain
> + - description: XUSBA power domain
> +
> + power-domain-names:
> + items:
> + - const: xusb_host
> + - const: xusb_ss
> +
> + dma-coherent:
> + type: boolean
> +
> +allOf:
> + - $ref: usb-xhci.yaml
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/tegra234-gpio.h>
> + #include <dt-bindings/clock/tegra234-clock.h>
> + #include <dt-bindings/memory/tegra234-mc.h>
> + #include <dt-bindings/power/tegra234-powergate.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + usb@3610000 {
> + compatible = "nvidia,tegra234-xusb";
> + reg = <0x03610000 0x40000>,
> + <0x03600000 0x10000>,
> + <0x03650000 0x10000>;
> + reg-names = "hcd", "fpci", "bar2";
> +
> + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_HOST>,
> + <&bpmp TEGRA234_CLK_XUSB_FALCON>,
> + <&bpmp TEGRA234_CLK_XUSB_CORE_SS>,
> + <&bpmp TEGRA234_CLK_XUSB_SS>,
> + <&bpmp TEGRA234_CLK_CLK_M>,
> + <&bpmp TEGRA234_CLK_XUSB_FS>,
> + <&bpmp TEGRA234_CLK_UTMIP_PLL>,
> + <&bpmp TEGRA234_CLK_CLK_M>,
> + <&bpmp TEGRA234_CLK_PLLE>;
> + clock-names = "xusb_host", "xusb_falcon_src",
> + "xusb_ss", "xusb_ss_src", "xusb_hs_src",
> + "xusb_fs_src", "pll_u_480m", "clk_m",
> + "pll_e";
> + interconnects = <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTR &emc>,
> + <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTW &emc>;
> + interconnect-names = "dma-mem", "write";
> + iommus = <&smmu_niso1 TEGRA234_SID_XUSB_HOST>;
> +
> + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_XUSBC>,
> + <&bpmp TEGRA234_POWER_DOMAIN_XUSBA>;
> + power-domain-names = "xusb_host", "xusb_ss";
> +
> + nvidia,xusb-padctl = <&xusb_padctl>;
> +
> + phys = <&pad_lanes_usb2_0>;
> + phy-names = "usb2-0";
> +
> + };
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Thanks
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 03/13] dt-bindings: usb: Add binding for Cypress cypd4226 I2C driver
2022-11-14 12:40 ` [PATCH v3 03/13] dt-bindings: usb: Add binding for Cypress cypd4226 I2C driver Wayne Chang
@ 2022-11-15 12:15 ` Jon Hunter
2022-11-16 21:14 ` Rob Herring
1 sibling, 0 replies; 40+ messages in thread
From: Jon Hunter @ 2022-11-15 12:15 UTC (permalink / raw)
To: Wayne Chang, gregkh, robh+dt, krzysztof.kozlowski+dt, treding,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
On 14/11/2022 12:40, Wayne Chang wrote:
> add device-tree binding documentation for Cypress cypd4226 type-C
> controller's I2C interface. It is a standard I2C slave with GPIO
> input as IRQ interface.
>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
> ---
> V2 -> V3:fix additionalProperties warning on new schema
> V1 -> V2:based on the review comments. Fix some addressed issues on
> description, interrupts, cypress,firmware-build, connector, and
> additionalProperties properties. And also remove the status in the example.
> .../bindings/usb/cypress,cypd4226.yaml | 86 +++++++++++++++++++
> 1 file changed, 86 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
>
> diff --git a/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
> new file mode 100644
> index 000000000000..854fe2f9181c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
> @@ -0,0 +1,86 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/cypress,cypd4226.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cypress cypd4226 UCSI I2C Type-C Controller
> +
> +maintainers:
> + - Wayne Chang <waynec@nvidia.com>
> +
> +description:
> + The Cypress cypd4226 UCSI I2C type-C controller is a I2C interface type-C
> + controller.
> +
> +properties:
> + compatible:
> + const: cypress,cypd4226
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + reg:
> + const: 0x08
> +
> + interrupts:
> + items:
> + - description: cypd4226 I2C interrupt
> +
> + cypress,firmware-build:
> + enum:
> + - nvidia,gpu
> + - nvidia,jetson-agx-xavier
> + description: |
> + the name of the CCGx firmware built for product series.
> + should be set one of following:
> + - "nvidia,gpu" for the NVIDIA RTX product series
> + - "nvidia,jetson-agx-xavier" for the NVIDIA Jetson product series
> +
> +patternProperties:
> + '^connector@[0-1]+$':
> + $ref: /schemas/connector/usb-connector.yaml#
> + properties:
> + reg:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/tegra194-gpio.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <2>;
> +
> + ucsi-ccg@8 {
> + compatible = "cypress,cypd4226";
> + interrupt-parent = <&gpio_aon>;
> + interrupts = <TEGRA194_AON_GPIO(BB, 2) IRQ_TYPE_LEVEL_LOW>;
> + reg = <0x08>;
> + cypress,firmware-build = "nvidia,jetson-agx-xavier";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + ccg_typec_con0: connector@0 {
> + compatible = "usb-c-connector";
> + reg = <0>;
> + label = "USB-C";
> + data-role = "dual";
> + port {
> + ucsi_ccg_p0: endpoint {
> + remote-endpoint = <&usb_role_switch0>;
> + };
> + };
> + };
> + };
> + };
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Thanks
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 04/13] arm64: tegra: Enable XUSB host and device on Jetson AGX Orin
2022-11-14 12:40 ` [PATCH v3 04/13] arm64: tegra: Enable XUSB host and device on Jetson AGX Orin Wayne Chang
@ 2022-11-15 12:17 ` Jon Hunter
0 siblings, 0 replies; 40+ messages in thread
From: Jon Hunter @ 2022-11-15 12:17 UTC (permalink / raw)
To: Wayne Chang, gregkh, robh+dt, krzysztof.kozlowski+dt, treding,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
On 14/11/2022 12:40, Wayne Chang wrote:
> This commit enables XUSB host, device, and pad controller on
> Jetson AGX Orin.
>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
> ---
> depends on the following change
> https://lore.kernel.org/all/20221003125141.123759-1-jonathanh@nvidia.com/
> V2 -> V3:nothing has changed but added the dependency here
> V1 -> V2:removed the redundant cells and status in ucsi-ccg.
> Using dash instead of underscore in the ucsi-ccg node name.
> Using representive name in cypress,firmware-build property.
> .../boot/dts/nvidia/tegra234-p3701-0000.dtsi | 48 +++++
> .../nvidia/tegra234-p3737-0000+p3701-0000.dts | 175 ++++++++++++++++++
> arch/arm64/boot/dts/nvidia/tegra234.dtsi | 170 +++++++++++++++++
> 3 files changed, 393 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
> index 9e4d72cfa69f..8acef87a5398 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
> @@ -61,6 +61,29 @@ mmc@3460000 {
> non-removable;
> };
>
> + padctl@3520000 {
> + vclamp-usb-supply = <&vdd_ao_1v8>;
> + avdd-usb-supply = <&vdd_ao_3v3>;
> +
> + ports {
> + usb2-0 {
> + vbus-supply = <&vdd_5v0_sys>;
> + };
> +
> + usb2-1 {
> + vbus-supply = <&vdd_5v0_sys>;
> + };
> +
> + usb2-2 {
> + vbus-supply = <&vdd_5v0_sys>;
> + };
> +
> + usb2-3 {
> + vbus-supply = <&vdd_5v0_sys>;
> + };
> + };
> + };
> +
> rtc@c2a0000 {
> status = "okay";
> };
> @@ -69,4 +92,29 @@ pmc@c360000 {
> nvidia,invert-interrupt;
> };
> };
> +
> + vdd_5v0_sys: regulator@0 {
> + compatible = "regulator-fixed";
> + regulator-name = "VIN_SYS_5V0";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vdd_ao_1v8: regulator@1 {
> + compatible = "regulator-fixed";
> + regulator-name = "vdd-AO-1v8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + vdd_ao_3v3: regulator@2 {
> + compatible = "regulator-fixed";
> + regulator-name = "vdd-AO-3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> };
> diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
> index 57ab75328814..58baedbd0f93 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
> +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
> @@ -2011,6 +2011,181 @@ hda@3510000 {
> nvidia,model = "NVIDIA Jetson AGX Orin HDA";
> status = "okay";
> };
> +
> + padctl@3520000 {
> + status = "okay";
> +
> + pads {
> + usb2 {
> + lanes {
> + usb2-0 {
> + status = "okay";
> + };
> +
> + usb2-1 {
> + status = "okay";
> + };
> +
> + usb2-2 {
> + status = "okay";
> + };
> +
> + usb2-3 {
> + status = "okay";
> + };
> + };
> + };
> +
> + usb3 {
> + lanes {
> + usb3-0 {
> + status = "okay";
> + };
> +
> + usb3-1 {
> + status = "okay";
> + };
> +
> + usb3-2 {
> + status = "okay";
> + };
> + };
> + };
> + };
> +
> + ports {
> + usb2-0 {
> + mode = "otg";
> + usb-role-switch;
> + status = "okay";
> + port {
> + hs_typec_p1: endpoint {
> + remote-endpoint = <&hs_ucsi_ccg_p1>;
> + };
> + };
> + };
> +
> + usb2-1 {
> + mode = "host";
> + status = "okay";
> + port {
> + hs_typec_p0: endpoint {
> + remote-endpoint = <&hs_ucsi_ccg_p0>;
> + };
> + };
> + };
> +
> + usb2-2 {
> + mode = "host";
> + status = "okay";
> + };
> +
> + usb2-3 {
> + mode = "host";
> + status = "okay";
> + };
> +
> + usb3-0 {
> + nvidia,usb2-companion = <1>;
> + status = "okay";
> + port {
> + ss_typec_p0: endpoint {
> + remote-endpoint = <&ss_ucsi_ccg_p0>;
> + };
> + };
> + };
> +
> + usb3-1 {
> + nvidia,usb2-companion = <0>;
> + status = "okay";
> + port {
> + ss_typec_p1: endpoint {
> + remote-endpoint = <&ss_ucsi_ccg_p1>;
> + };
> + };
> + };
> +
> + usb3-2 {
> + nvidia,usb2-companion = <3>;
> + status = "okay";
> + };
> + };
> + };
> +
> + usb@3550000 {
> + status = "okay";
> +
> + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
> + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>;
> + phy-names = "usb2-0", "usb3-1";
> + };
> +
> + usb@3610000 {
> + status = "okay";
> +
> + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
> + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
> + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
> + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
> + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
> + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>,
> + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
> + phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3",
> + "usb3-0", "usb3-1", "usb3-2";
> + };
> +
> + i2c@c240000 {
> + status = "okay";
> + ucsi-ccg@8 {
> + compatible = "cypress,cypd4226";
> + cypress,firmware-build = "nvidia,jetson-agx-xavier";
> + interrupt-parent = <&gpio>;
> + interrupts = <TEGRA234_MAIN_GPIO(Y, 4) IRQ_TYPE_LEVEL_LOW>;
> + reg = <0x08>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + ccg_typec_con0: connector@0 {
> + compatible = "usb-c-connector";
> + reg = <0>;
> + label = "USB-C";
> + data-role = "host";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port@0 {
> + reg = <0>;
> + hs_ucsi_ccg_p0: endpoint {
> + remote-endpoint = <&hs_typec_p0>;
> + };
> + };
> + port@1 {
> + reg = <1>;
> + ss_ucsi_ccg_p0: endpoint {
> + remote-endpoint = <&ss_typec_p0>;
> + };
> + };
> + };
> + ccg_typec_con1: connector@1 {
> + compatible = "usb-c-connector";
> + reg = <1>;
> + label = "USB-C";
> + data-role = "dual";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port@0 {
> + reg = <0>;
> + hs_ucsi_ccg_p1: endpoint {
> + remote-endpoint = <&hs_typec_p1>;
> + };
> + };
> + port@1 {
> + reg = <1>;
> + ss_ucsi_ccg_p1: endpoint {
> + remote-endpoint = <&ss_typec_p1>;
> + };
> + };
> + };
> + };
> + };
> };
>
> chosen {
> diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
> index 0170bfa8a467..27635d459e4c 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
> @@ -942,6 +942,174 @@ hda@3510000 {
> status = "disabled";
> };
>
> + xusb_padctl: padctl@3520000 {
> + compatible = "nvidia,tegra234-xusb-padctl";
> + reg = <0x03520000 0x20000>,
> + <0x03540000 0x10000>;
> + reg-names = "padctl", "ao";
> + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
> +
> + resets = <&bpmp TEGRA234_RESET_XUSB_PADCTL>;
> + reset-names = "padctl";
> +
> + status = "disabled";
> +
> + pads {
> + usb2 {
> + clocks = <&bpmp TEGRA234_CLK_USB2_TRK>;
> + clock-names = "trk";
> +
> + lanes {
> + usb2-0 {
> + nvidia,function = "xusb";
> + status = "disabled";
> + #phy-cells = <0>;
> + };
> +
> + usb2-1 {
> + nvidia,function = "xusb";
> + status = "disabled";
> + #phy-cells = <0>;
> + };
> +
> + usb2-2 {
> + nvidia,function = "xusb";
> + status = "disabled";
> + #phy-cells = <0>;
> + };
> +
> + usb2-3 {
> + nvidia,function = "xusb";
> + status = "disabled";
> + #phy-cells = <0>;
> + };
> + };
> + };
> +
> + usb3 {
> + lanes {
> + usb3-0 {
> + nvidia,function = "xusb";
> + status = "disabled";
> + #phy-cells = <0>;
> + };
> +
> + usb3-1 {
> + nvidia,function = "xusb";
> + status = "disabled";
> + #phy-cells = <0>;
> + };
> +
> + usb3-2 {
> + nvidia,function = "xusb";
> + status = "disabled";
> + #phy-cells = <0>;
> + };
> +
> + usb3-3 {
> + nvidia,function = "xusb";
> + status = "disabled";
> + #phy-cells = <0>;
> + };
> + };
> + };
> + };
> +
> + ports {
> + usb2-0 {
> + status = "disabled";
> + };
> +
> + usb2-1 {
> + status = "disabled";
> + };
> +
> + usb2-2 {
> + status = "disabled";
> + };
> +
> + usb2-3 {
> + status = "disabled";
> + };
> +
> + usb3-0 {
> + status = "disabled";
> + };
> +
> + usb3-1 {
> + status = "disabled";
> + };
> +
> + usb3-2 {
> + status = "disabled";
> + };
> +
> + usb3-3 {
> + status = "disabled";
> + };
> + };
> + };
> +
> + usb@3550000 {
> + compatible = "nvidia,tegra234-xudc";
> + reg = <0x03550000 0x8000>,
> + <0x03558000 0x8000>;
> + reg-names = "base", "fpci";
> + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_DEV>,
> + <&bpmp TEGRA234_CLK_XUSB_CORE_SS>,
> + <&bpmp TEGRA234_CLK_XUSB_SS>,
> + <&bpmp TEGRA234_CLK_XUSB_FS>;
> + clock-names = "dev", "ss", "ss_src", "fs_src";
> + interconnects = <&mc TEGRA234_MEMORY_CLIENT_XUSB_DEVR &emc>,
> + <&mc TEGRA234_MEMORY_CLIENT_XUSB_DEVW &emc>;
> + interconnect-names = "dma-mem", "write";
> + iommus = <&smmu_niso1 TEGRA234_SID_XUSB_DEV>;
> + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_XUSBB>,
> + <&bpmp TEGRA234_POWER_DOMAIN_XUSBA>;
> + power-domain-names = "dev", "ss";
> + nvidia,xusb-padctl = <&xusb_padctl>;
> + dma-coherent;
> + status = "disabled";
> + };
> +
> + usb@3610000 {
> + compatible = "nvidia,tegra234-xusb";
> + reg = <0x03610000 0x40000>,
> + <0x03600000 0x10000>,
> + <0x03650000 0x10000>;
> + reg-names = "hcd", "fpci", "bar2";
> +
> + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_HOST>,
> + <&bpmp TEGRA234_CLK_XUSB_FALCON>,
> + <&bpmp TEGRA234_CLK_XUSB_CORE_SS>,
> + <&bpmp TEGRA234_CLK_XUSB_SS>,
> + <&bpmp TEGRA234_CLK_CLK_M>,
> + <&bpmp TEGRA234_CLK_XUSB_FS>,
> + <&bpmp TEGRA234_CLK_UTMIP_PLL>,
> + <&bpmp TEGRA234_CLK_CLK_M>,
> + <&bpmp TEGRA234_CLK_PLLE>;
> + clock-names = "xusb_host", "xusb_falcon_src",
> + "xusb_ss", "xusb_ss_src", "xusb_hs_src",
> + "xusb_fs_src", "pll_u_480m", "clk_m",
> + "pll_e";
> + interconnects = <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTR &emc>,
> + <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTW &emc>;
> + interconnect-names = "dma-mem", "write";
> + iommus = <&smmu_niso1 TEGRA234_SID_XUSB_HOST>;
> +
> + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_XUSBC>,
> + <&bpmp TEGRA234_POWER_DOMAIN_XUSBA>;
> + power-domain-names = "xusb_host", "xusb_ss";
> +
> + nvidia,xusb-padctl = <&xusb_padctl>;
> + dma-coherent;
> + status = "disabled";
> + };
> +
> fuse@3810000 {
> compatible = "nvidia,tegra234-efuse";
> reg = <0x03810000 0x10000>;
> @@ -1470,6 +1638,8 @@ gen2_i2c: i2c@c240000 {
> compatible = "nvidia,tegra194-i2c";
> reg = <0xc240000 0x100>;
> interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "disabled";
> clock-frequency = <100000>;
> clocks = <&bpmp TEGRA234_CLK_I2C2
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Thanks
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 05/13] usb: typec: ucsi_ccg: Add OF support
2022-11-14 12:40 ` [PATCH v3 05/13] usb: typec: ucsi_ccg: Add OF support Wayne Chang
@ 2022-11-15 12:17 ` Jon Hunter
2022-11-16 12:37 ` Heikki Krogerus
2022-11-16 12:54 ` Heikki Krogerus
2 siblings, 0 replies; 40+ messages in thread
From: Jon Hunter @ 2022-11-15 12:17 UTC (permalink / raw)
To: Wayne Chang, gregkh, robh+dt, krzysztof.kozlowski+dt, treding,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
On 14/11/2022 12:40, Wayne Chang wrote:
> The change enables the device tree infrastructure support.
>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
> ---
> V2 -> V3:nothing has changed
> V1 -> V2:nothing has changed
> drivers/usb/typec/ucsi/ucsi_ccg.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
> index 835f1c4372ba..139707a2f3d6 100644
> --- a/drivers/usb/typec/ucsi/ucsi_ccg.c
> +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
> @@ -643,7 +643,7 @@ static int ccg_request_irq(struct ucsi_ccg *uc)
> {
> unsigned long flags = IRQF_ONESHOT;
>
> - if (!has_acpi_companion(uc->dev))
> + if (!dev_fwnode(uc->dev))
> flags |= IRQF_TRIGGER_HIGH;
>
> return request_threaded_irq(uc->irq, NULL, ccg_irq_handler, flags, dev_name(uc->dev), uc);
> @@ -1427,6 +1427,12 @@ static void ucsi_ccg_remove(struct i2c_client *client)
> free_irq(uc->irq, uc);
> }
>
> +static const struct of_device_id ucsi_ccg_of_match_table[] = {
> + { .compatible = "cypress,cypd4226", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, ucsi_ccg_of_match_table);
> +
> static const struct i2c_device_id ucsi_ccg_device_id[] = {
> {"ccgx-ucsi", 0},
> {}
> @@ -1481,6 +1487,7 @@ static struct i2c_driver ucsi_ccg_driver = {
> .pm = &ucsi_ccg_pm,
> .dev_groups = ucsi_ccg_groups,
> .acpi_match_table = amd_i2c_ucsi_match,
> + .of_match_table = ucsi_ccg_of_match_table,
> },
> .probe = ucsi_ccg_probe,
> .remove = ucsi_ccg_remove,
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Thanks
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 06/13] usb: typec: ucsi_ccg: Add cypress,firmware-build as a well-known regex
2022-11-14 12:40 ` [PATCH v3 06/13] usb: typec: ucsi_ccg: Add cypress,firmware-build as a well-known regex Wayne Chang
@ 2022-11-15 12:18 ` Jon Hunter
2022-11-17 19:45 ` Jon Hunter
1 sibling, 0 replies; 40+ messages in thread
From: Jon Hunter @ 2022-11-15 12:18 UTC (permalink / raw)
To: Wayne Chang, gregkh, robh+dt, krzysztof.kozlowski+dt, treding,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
On 14/11/2022 12:40, Wayne Chang wrote:
> ccgx is refer to the cypress cypd4226 typec controller.
> add cypress,firmware-build as a well-known regex.
>
> 16-bit value is not sufficient for descriptiva names.
> Using string instead of u16 to make it more descriptive.
>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
> ---
> V2 -> V3:nothing has changed
> V1 -> V2:new change added for adding cypress,firmware-build
> drivers/usb/typec/ucsi/ucsi_ccg.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
> index 139707a2f3d6..e412a457bbfc 100644
> --- a/drivers/usb/typec/ucsi/ucsi_ccg.c
> +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
> @@ -1343,6 +1343,7 @@ static int ucsi_ccg_probe(struct i2c_client *client,
> {
> struct device *dev = &client->dev;
> struct ucsi_ccg *uc;
> + const char *of_fw_build;
> int status;
>
> uc = devm_kzalloc(dev, sizeof(*uc), GFP_KERNEL);
> @@ -1363,6 +1364,17 @@ static int ucsi_ccg_probe(struct i2c_client *client,
> if (status)
> dev_err(uc->dev, "failed to get FW build information\n");
>
> + status = device_property_read_string(dev, "cypress,firmware-build",
> + &of_fw_build);
> + if (!status) {
> + if (!strcmp(of_fw_build, "nvidia,jetson-agx-xavier"))
> + uc->fw_build = CCG_FW_BUILD_NVIDIA_TEGRA;
> + else if (!strcmp(of_fw_build, "nvidia,gpu"))
> + uc->fw_build = CCG_FW_BUILD_NVIDIA;
> + } else {
> + dev_err(uc->dev, "failed to get FW build information\n");
> + }
> +
> /* reset ccg device and initialize ucsi */
> status = ucsi_ccg_init(uc);
> if (status < 0) {
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Thanks
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 07/13] i2c: nvidia-gpu: Add cypress,firmware-build as a well-known regex
2022-11-14 12:40 ` [PATCH v3 07/13] i2c: nvidia-gpu: " Wayne Chang
@ 2022-11-15 12:18 ` Jon Hunter
2022-11-15 20:52 ` Wolfram Sang
1 sibling, 0 replies; 40+ messages in thread
From: Jon Hunter @ 2022-11-15 12:18 UTC (permalink / raw)
To: Wayne Chang, gregkh, robh+dt, krzysztof.kozlowski+dt, treding,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
On 14/11/2022 12:40, Wayne Chang wrote:
> ccgx is refer to the cypress cypd4226 typec controller.
> add cypress,firmware-build as a well-known regex.
>
> 16-bit value is not sufficient for descriptiva names.
> Using string instead of u16 to make it more descriptive.
>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
> ---
> V2 -> V3:nothing has changed
> V1 -> V2:New change for adding cypress,firmware-build
> drivers/i2c/busses/i2c-nvidia-gpu.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c
> index 12e330cd7635..9b2e13bd44db 100644
> --- a/drivers/i2c/busses/i2c-nvidia-gpu.c
> +++ b/drivers/i2c/busses/i2c-nvidia-gpu.c
> @@ -261,6 +261,7 @@ MODULE_DEVICE_TABLE(pci, gpu_i2c_ids);
> static const struct property_entry ccgx_props[] = {
> /* Use FW built for NVIDIA (nv) only */
> PROPERTY_ENTRY_U16("ccgx,firmware-build", ('n' << 8) | 'v'),
> + PROPERTY_ENTRY_STRING("cypress,firmware-build", "nvidia,gpu"),
> { }
> };
>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Thanks
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 08/13] usb: typec: ucsi_ccg: Remove ccgx,firmware-build property
2022-11-14 12:40 ` [PATCH v3 08/13] usb: typec: ucsi_ccg: Remove ccgx,firmware-build property Wayne Chang
@ 2022-11-15 12:19 ` Jon Hunter
0 siblings, 0 replies; 40+ messages in thread
From: Jon Hunter @ 2022-11-15 12:19 UTC (permalink / raw)
To: Wayne Chang, gregkh, robh+dt, krzysztof.kozlowski+dt, treding,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
On 14/11/2022 12:40, Wayne Chang wrote:
> Remove the property ccgx,firmware-build as we have added well-known
> regex cypress,firmware-build.
>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
> ---
> V2 -> V3:nothing has changed
> V1 -> V2:nothing has changed
> drivers/usb/typec/ucsi/ucsi_ccg.c | 5 -----
> 1 file changed, 5 deletions(-)
>
> diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
> index e412a457bbfc..eab3012e1b01 100644
> --- a/drivers/usb/typec/ucsi/ucsi_ccg.c
> +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
> @@ -1359,11 +1359,6 @@ static int ucsi_ccg_probe(struct i2c_client *client,
> INIT_WORK(&uc->pm_work, ccg_pm_workaround_work);
>
> /* Only fail FW flashing when FW build information is not provided */
> - status = device_property_read_u16(dev, "ccgx,firmware-build",
> - &uc->fw_build);
> - if (status)
> - dev_err(uc->dev, "failed to get FW build information\n");
> -
> status = device_property_read_string(dev, "cypress,firmware-build",
> &of_fw_build);
> if (!status) {
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Thanks
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 09/13] i2c: nvidia-gpu: Remove ccgx,firmware-build property
2022-11-14 12:40 ` [PATCH v3 09/13] i2c: nvidia-gpu: " Wayne Chang
@ 2022-11-15 12:19 ` Jon Hunter
2022-11-15 20:53 ` Wolfram Sang
1 sibling, 0 replies; 40+ messages in thread
From: Jon Hunter @ 2022-11-15 12:19 UTC (permalink / raw)
To: Wayne Chang, gregkh, robh+dt, krzysztof.kozlowski+dt, treding,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
On 14/11/2022 12:40, Wayne Chang wrote:
> Remove the property ccgx,firmware-build as we have added well-known
> regex cypress,firmware-build.
>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
> ---
> V2 -> V3:nothing has changed
> V1 -> V2:New added for bisectablility
> drivers/i2c/busses/i2c-nvidia-gpu.c | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c
> index 9b2e13bd44db..092d4d52098c 100644
> --- a/drivers/i2c/busses/i2c-nvidia-gpu.c
> +++ b/drivers/i2c/busses/i2c-nvidia-gpu.c
> @@ -259,8 +259,7 @@ static const struct pci_device_id gpu_i2c_ids[] = {
> MODULE_DEVICE_TABLE(pci, gpu_i2c_ids);
>
> static const struct property_entry ccgx_props[] = {
> - /* Use FW built for NVIDIA (nv) only */
> - PROPERTY_ENTRY_U16("ccgx,firmware-build", ('n' << 8) | 'v'),
> + /* Use FW built for NVIDIA GPU only */
> PROPERTY_ENTRY_STRING("cypress,firmware-build", "nvidia,gpu"),
> { }
> };
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Thanks
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 10/13] phy: tegra: xusb: Disable trk clk when not in use
2022-11-14 12:40 ` [PATCH v3 10/13] phy: tegra: xusb: Disable trk clk when not in use Wayne Chang
@ 2022-11-15 12:19 ` Jon Hunter
2023-01-12 17:23 ` Vinod Koul
1 sibling, 0 replies; 40+ messages in thread
From: Jon Hunter @ 2022-11-15 12:19 UTC (permalink / raw)
To: Wayne Chang, gregkh, robh+dt, krzysztof.kozlowski+dt, treding,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
On 14/11/2022 12:40, Wayne Chang wrote:
> Pad tracking is a one-time calibration for Tegra186 and Tegra194.
> Clk should be disabled after calibration.
>
> Disable clk after calibration.
> While at it add 100us delay for HW recording the calibration value.
>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
> ---
> V2 -> V3:nothing has changed
> V1 -> V2:update the commit message.
> drivers/phy/tegra/xusb-tegra186.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
> index 0996ede63387..f121b4ffbbfd 100644
> --- a/drivers/phy/tegra/xusb-tegra186.c
> +++ b/drivers/phy/tegra/xusb-tegra186.c
> @@ -609,6 +609,10 @@ static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl)
> value &= ~USB2_PD_TRK;
> padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
>
> + udelay(100);
> +
> + clk_disable_unprepare(priv->usb2_trk_clk);
> +
> mutex_unlock(&padctl->lock);
> }
>
> @@ -633,8 +637,6 @@ static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl)
> value |= USB2_PD_TRK;
> padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
>
> - clk_disable_unprepare(priv->usb2_trk_clk);
> -
> mutex_unlock(&padctl->lock);
> }
>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Thanks
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 11/13] phy: tegra: xusb: Add Tegra234 support
2022-11-14 12:40 ` [PATCH v3 11/13] phy: tegra: xusb: Add Tegra234 support Wayne Chang
@ 2022-11-15 12:22 ` Jon Hunter
0 siblings, 0 replies; 40+ messages in thread
From: Jon Hunter @ 2022-11-15 12:22 UTC (permalink / raw)
To: Wayne Chang, gregkh, robh+dt, krzysztof.kozlowski+dt, treding,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
On 14/11/2022 12:40, Wayne Chang wrote:
> From: Sing-Han Chen <singhanc@nvidia.com>
>
> Add support for the XUSB pad controller found on Tegra234 SoCs. It is
> mostly similar to the same IP found on Tegra194, because most of
> the Tegra234 XUSB PADCTL registers definition and programming sequence
> are the same as Tegra194, Tegra234 XUSB PADCTL can share the same
> driver with Tegra186 and Tegra194 XUSB PADCTL.
>
> Introduce a new feature, USB2 HW tracking, for Tegra234.
> The feature is to enable HW periodical PAD tracking which measure
> and capture the electric parameters of USB2.0 PAD.
>
> Signed-off-by: Sing-Han Chen <singhanc@nvidia.com>
> Co-developed-by: Wayne Chang <waynec@nvidia.com>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
> ---
> V2 -> V3:nothing has changed
> V1 -> V2:remove atomic and the helper in padctl_readl_poll func.
> drivers/phy/tegra/Makefile | 1 +
> drivers/phy/tegra/xusb-tegra186.c | 64 +++++++++++++++++++++++++++++--
> drivers/phy/tegra/xusb.c | 6 +++
> drivers/phy/tegra/xusb.h | 22 +++++++++++
> 4 files changed, 90 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/phy/tegra/Makefile b/drivers/phy/tegra/Makefile
> index 89b84067cb4c..eeeea72de117 100644
> --- a/drivers/phy/tegra/Makefile
> +++ b/drivers/phy/tegra/Makefile
> @@ -7,4 +7,5 @@ phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_132_SOC) += xusb-tegra124.o
> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o
> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_186_SOC) += xusb-tegra186.o
> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_194_SOC) += xusb-tegra186.o
> +phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_234_SOC) += xusb-tegra186.o
> obj-$(CONFIG_PHY_TEGRA194_P2U) += phy-tegra194-p2u.o
> diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
> index f121b4ffbbfd..5ae3cea19c84 100644
> --- a/drivers/phy/tegra/xusb-tegra186.c
> +++ b/drivers/phy/tegra/xusb-tegra186.c
> @@ -89,6 +89,11 @@
> #define USB2_TRK_START_TIMER(x) (((x) & 0x7f) << 12)
> #define USB2_TRK_DONE_RESET_TIMER(x) (((x) & 0x7f) << 19)
> #define USB2_PD_TRK BIT(26)
> +#define USB2_TRK_COMPLETED BIT(31)
> +
> +#define XUSB_PADCTL_USB2_BIAS_PAD_CTL2 0x28c
> +#define USB2_TRK_HW_MODE BIT(0)
> +#define CYA_TRK_CODE_UPDATE_ON_IDLE BIT(31)
>
> #define XUSB_PADCTL_HSIC_PADX_CTL0(x) (0x300 + (x) * 0x20)
> #define HSIC_PD_TX_DATA0 BIT(1)
> @@ -609,9 +614,31 @@ static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl)
> value &= ~USB2_PD_TRK;
> padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
>
> - udelay(100);
> + if (padctl->soc->poll_trk_completed) {
> + err = padctl_readl_poll(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1,
> + USB2_TRK_COMPLETED, USB2_TRK_COMPLETED, 100);
> + if (err) {
> + /* The failure with polling on trk complete will not
> + * cause the failure of powering on the bias pad.
> + */
> + dev_warn(dev, "failed to poll USB2 trk completed: %d\n", err);
> + }
>
> - clk_disable_unprepare(priv->usb2_trk_clk);
> + value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
> + value |= USB2_TRK_COMPLETED;
> + padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
> + } else {
> + udelay(100);
> + }
> +
> + if (padctl->soc->trk_hw_mode) {
> + value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL2);
> + value |= USB2_TRK_HW_MODE;
> + value &= ~CYA_TRK_CODE_UPDATE_ON_IDLE;
> + padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL2);
> + } else {
> + clk_disable_unprepare(priv->usb2_trk_clk);
> + }
>
> mutex_unlock(&padctl->lock);
> }
> @@ -637,6 +664,13 @@ static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl)
> value |= USB2_PD_TRK;
> padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
>
> + if (padctl->soc->trk_hw_mode) {
> + value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL2);
> + value &= ~USB2_TRK_HW_MODE;
> + padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL2);
> + clk_disable_unprepare(priv->usb2_trk_clk);
> + }
> +
> mutex_unlock(&padctl->lock);
> }
>
> @@ -1560,7 +1594,8 @@ const struct tegra_xusb_padctl_soc tegra186_xusb_padctl_soc = {
> EXPORT_SYMBOL_GPL(tegra186_xusb_padctl_soc);
> #endif
>
> -#if IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC)
> +#if IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC) || \
> + IS_ENABLED(CONFIG_ARCH_TEGRA_234_SOC)
> static const char * const tegra194_xusb_padctl_supply_names[] = {
> "avdd-usb",
> "vclamp-usb",
> @@ -1616,8 +1651,31 @@ const struct tegra_xusb_padctl_soc tegra194_xusb_padctl_soc = {
> .supply_names = tegra194_xusb_padctl_supply_names,
> .num_supplies = ARRAY_SIZE(tegra194_xusb_padctl_supply_names),
> .supports_gen2 = true,
> + .poll_trk_completed = true,
> };
> EXPORT_SYMBOL_GPL(tegra194_xusb_padctl_soc);
> +
> +const struct tegra_xusb_padctl_soc tegra234_xusb_padctl_soc = {
> + .num_pads = ARRAY_SIZE(tegra194_pads),
> + .pads = tegra194_pads,
> + .ports = {
> + .usb2 = {
> + .ops = &tegra186_usb2_port_ops,
> + .count = 4,
> + },
> + .usb3 = {
> + .ops = &tegra186_usb3_port_ops,
> + .count = 4,
> + },
> + },
> + .ops = &tegra186_xusb_padctl_ops,
> + .supply_names = tegra194_xusb_padctl_supply_names,
> + .num_supplies = ARRAY_SIZE(tegra194_xusb_padctl_supply_names),
> + .supports_gen2 = true,
> + .poll_trk_completed = true,
> + .trk_hw_mode = true,
> +};
> +EXPORT_SYMBOL_GPL(tegra234_xusb_padctl_soc);
> #endif
>
> MODULE_AUTHOR("JC Kuo <jckuo@nvidia.com>");
> diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
> index dce45fbbd699..c2f160628552 100644
> --- a/drivers/phy/tegra/xusb.c
> +++ b/drivers/phy/tegra/xusb.c
> @@ -71,6 +71,12 @@ static const struct of_device_id tegra_xusb_padctl_of_match[] = {
> .compatible = "nvidia,tegra194-xusb-padctl",
> .data = &tegra194_xusb_padctl_soc,
> },
> +#endif
> +#if defined(CONFIG_ARCH_TEGRA_234_SOC)
> + {
> + .compatible = "nvidia,tegra234-xusb-padctl",
> + .data = &tegra234_xusb_padctl_soc,
> + },
> #endif
> { }
> };
> diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
> index 8cfbbdbd6e0c..a21826c730d7 100644
> --- a/drivers/phy/tegra/xusb.h
> +++ b/drivers/phy/tegra/xusb.h
> @@ -8,6 +8,7 @@
> #define __PHY_TEGRA_XUSB_H
>
> #include <linux/io.h>
> +#include <linux/iopoll.h>
> #include <linux/mutex.h>
> #include <linux/workqueue.h>
>
> @@ -433,6 +434,8 @@ struct tegra_xusb_padctl_soc {
> unsigned int num_supplies;
> bool supports_gen2;
> bool need_fake_usb3_port;
> + bool poll_trk_completed;
> + bool trk_hw_mode;
> };
>
> struct tegra_xusb_padctl {
> @@ -475,6 +478,22 @@ static inline u32 padctl_readl(struct tegra_xusb_padctl *padctl,
> return value;
> }
>
> +static inline u32 padctl_readl_poll(struct tegra_xusb_padctl *padctl,
> + unsigned long offset, u32 val, u32 mask, int us)
> +{
> + u32 regval;
> + int err;
> +
> + err = readl_poll_timeout(padctl->regs + offset, regval,
> + (regval & mask) == val, 1, us);
> + if (err) {
> + dev_err(padctl->dev, "%08lx poll timeout > %08x\n", offset,
> + regval);
> + }
> +
> + return err;
> +}
> +
> struct tegra_xusb_lane *tegra_xusb_find_lane(struct tegra_xusb_padctl *padctl,
> const char *name,
> unsigned int index);
> @@ -491,5 +510,8 @@ extern const struct tegra_xusb_padctl_soc tegra186_xusb_padctl_soc;
> #if defined(CONFIG_ARCH_TEGRA_194_SOC)
> extern const struct tegra_xusb_padctl_soc tegra194_xusb_padctl_soc;
> #endif
> +#if defined(CONFIG_ARCH_TEGRA_234_SOC)
> +extern const struct tegra_xusb_padctl_soc tegra234_xusb_padctl_soc;
> +#endif
>
> #endif /* __PHY_TEGRA_XUSB_H */
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Thanks
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 12/13] usb: host: xhci-tegra: Add Tegra234 XHCI support
2022-11-14 12:40 ` [PATCH v3 12/13] usb: host: xhci-tegra: Add Tegra234 XHCI support Wayne Chang
@ 2022-11-15 12:23 ` Jon Hunter
0 siblings, 0 replies; 40+ messages in thread
From: Jon Hunter @ 2022-11-15 12:23 UTC (permalink / raw)
To: Wayne Chang, gregkh, robh+dt, krzysztof.kozlowski+dt, treding,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
On 14/11/2022 12:40, Wayne Chang wrote:
> From: Sing-Han Chen <singhanc@nvidia.com>
>
> This change adds Tegra234 XUSB host mode controller support.
>
> In Tegra234, some of the registers have moved to bar2 space.
> The new soc variable has_bar2 indicates the chip with bar2
> area. This patch adds new reg helper to let the driver reuse
> the same code for those chips with bar2 support.
>
> Signed-off-by: Sing-Han Chen <singhanc@nvidia.com>
> Co-developed-by: Wayne Chang <waynec@nvidia.com>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
> ---
> V2 -> V3:nothing has changed
> V1 -> V2:fix some issues on coding style
> extract tegra_xusb_load_firmware function
> refine has_bar2 and remove has_ifr/firmware on Tegra234
> drivers/usb/host/xhci-tegra.c | 270 +++++++++++++++++++++++++++++-----
> 1 file changed, 232 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
> index bdb776553826..b2f07eae2c93 100644
> --- a/drivers/usb/host/xhci-tegra.c
> +++ b/drivers/usb/host/xhci-tegra.c
> @@ -44,6 +44,9 @@
> #define XUSB_CFG_4 0x010
> #define XUSB_BASE_ADDR_SHIFT 15
> #define XUSB_BASE_ADDR_MASK 0x1ffff
> +#define XUSB_CFG_7 0x01c
> +#define XUSB_BASE2_ADDR_SHIFT 16
> +#define XUSB_BASE2_ADDR_MASK 0xffff
> #define XUSB_CFG_16 0x040
> #define XUSB_CFG_24 0x060
> #define XUSB_CFG_AXI_CFG 0x0f8
> @@ -75,6 +78,20 @@
> #define MBOX_SMI_INTR_FW_HANG BIT(1)
> #define MBOX_SMI_INTR_EN BIT(3)
>
> +/* BAR2 registers */
> +#define XUSB_BAR2_ARU_MBOX_CMD 0x004
> +#define XUSB_BAR2_ARU_MBOX_DATA_IN 0x008
> +#define XUSB_BAR2_ARU_MBOX_DATA_OUT 0x00c
> +#define XUSB_BAR2_ARU_MBOX_OWNER 0x010
> +#define XUSB_BAR2_ARU_SMI_INTR 0x014
> +#define XUSB_BAR2_ARU_SMI_ARU_FW_SCRATCH_DATA0 0x01c
> +#define XUSB_BAR2_ARU_IFRDMA_CFG0 0x0e0
> +#define XUSB_BAR2_ARU_IFRDMA_CFG1 0x0e4
> +#define XUSB_BAR2_ARU_IFRDMA_STREAMID_FIELD 0x0e8
> +#define XUSB_BAR2_ARU_C11_CSBRANGE 0x9c
> +#define XUSB_BAR2_ARU_FW_SCRATCH 0x1000
> +#define XUSB_BAR2_CSB_BASE_ADDR 0x2000
> +
> /* IPFS registers */
> #define IPFS_XUSB_HOST_MSI_BAR_SZ_0 0x0c0
> #define IPFS_XUSB_HOST_MSI_AXI_BAR_ST_0 0x0c4
> @@ -111,6 +128,9 @@
> #define IMFILLRNG1_TAG_HI_SHIFT 16
> #define XUSB_FALC_IMFILLCTL 0x158
>
> +/* CSB ARU registers */
> +#define XUSB_CSB_ARU_SCRATCH0 0x100100
> +
> /* MP CSB registers */
> #define XUSB_CSB_MP_ILOAD_ATTR 0x101a00
> #define XUSB_CSB_MP_ILOAD_BASE_LO 0x101a04
> @@ -131,6 +151,9 @@
>
> #define IMEM_BLOCK_SIZE 256
>
> +#define FW_IOCTL_TYPE_SHIFT 24
> +#define FW_IOCTL_CFGTBL_READ 17
> +
> struct tegra_xusb_fw_header {
> __le32 boot_loadaddr_in_imem;
> __le32 boot_codedfi_offset;
> @@ -175,6 +198,7 @@ struct tegra_xusb_mbox_regs {
> u16 data_in;
> u16 data_out;
> u16 owner;
> + u16 smi_intr;
> };
>
> struct tegra_xusb_context_soc {
> @@ -189,6 +213,18 @@ struct tegra_xusb_context_soc {
> } fpci;
> };
>
> +struct tegra_xusb;
> +struct tegra_xusb_soc_ops {
> + u32 (*mbox_reg_readl)(struct tegra_xusb *tegra,
> + unsigned int offset);
> + void (*mbox_reg_writel)(struct tegra_xusb *tegra,
> + u32 value, unsigned int offset);
> + u32 (*csb_reg_readl)(struct tegra_xusb *tegra,
> + unsigned int offset);
> + void (*csb_reg_writel)(struct tegra_xusb *tegra,
> + u32 value, unsigned int offset);
> +};
> +
> struct tegra_xusb_soc {
> const char *firmware;
> const char * const *supply_names;
> @@ -205,11 +241,14 @@ struct tegra_xusb_soc {
> } ports;
>
> struct tegra_xusb_mbox_regs mbox;
> + const struct tegra_xusb_soc_ops *ops;
>
> bool scale_ss_clock;
> bool has_ipfs;
> bool lpm_support;
> bool otg_reset_sspi;
> +
> + bool has_bar2;
> };
>
> struct tegra_xusb_context {
> @@ -230,6 +269,8 @@ struct tegra_xusb {
>
> void __iomem *ipfs_base;
> void __iomem *fpci_base;
> + void __iomem *bar2_base;
> + struct resource *bar2;
>
> const struct tegra_xusb_soc *soc;
>
> @@ -300,7 +341,33 @@ static inline void ipfs_writel(struct tegra_xusb *tegra, u32 value,
> writel(value, tegra->ipfs_base + offset);
> }
>
> +static inline u32 bar2_readl(struct tegra_xusb *tegra, unsigned int offset)
> +{
> + return readl(tegra->bar2_base + offset);
> +}
> +
> +static inline void bar2_writel(struct tegra_xusb *tegra, u32 value,
> + unsigned int offset)
> +{
> + writel(value, tegra->bar2_base + offset);
> +}
> +
> static u32 csb_readl(struct tegra_xusb *tegra, unsigned int offset)
> +{
> + const struct tegra_xusb_soc_ops *ops = tegra->soc->ops;
> +
> + return ops->csb_reg_readl(tegra, offset);
> +}
> +
> +static void csb_writel(struct tegra_xusb *tegra, u32 value,
> + unsigned int offset)
> +{
> + const struct tegra_xusb_soc_ops *ops = tegra->soc->ops;
> +
> + ops->csb_reg_writel(tegra, value, offset);
> +}
> +
> +static u32 fpci_csb_readl(struct tegra_xusb *tegra, unsigned int offset)
> {
> u32 page = CSB_PAGE_SELECT(offset);
> u32 ofs = CSB_PAGE_OFFSET(offset);
> @@ -310,7 +377,7 @@ static u32 csb_readl(struct tegra_xusb *tegra, unsigned int offset)
> return fpci_readl(tegra, XUSB_CFG_CSB_BASE_ADDR + ofs);
> }
>
> -static void csb_writel(struct tegra_xusb *tegra, u32 value,
> +static void fpci_csb_writel(struct tegra_xusb *tegra, u32 value,
> unsigned int offset)
> {
> u32 page = CSB_PAGE_SELECT(offset);
> @@ -320,6 +387,26 @@ static void csb_writel(struct tegra_xusb *tegra, u32 value,
> fpci_writel(tegra, value, XUSB_CFG_CSB_BASE_ADDR + ofs);
> }
>
> +static u32 bar2_csb_readl(struct tegra_xusb *tegra, unsigned int offset)
> +{
> + u32 page = CSB_PAGE_SELECT(offset);
> + u32 ofs = CSB_PAGE_OFFSET(offset);
> +
> + bar2_writel(tegra, page, XUSB_BAR2_ARU_C11_CSBRANGE);
> +
> + return bar2_readl(tegra, XUSB_BAR2_CSB_BASE_ADDR + ofs);
> +}
> +
> +static void bar2_csb_writel(struct tegra_xusb *tegra, u32 value,
> + unsigned int offset)
> +{
> + u32 page = CSB_PAGE_SELECT(offset);
> + u32 ofs = CSB_PAGE_OFFSET(offset);
> +
> + bar2_writel(tegra, page, XUSB_BAR2_ARU_C11_CSBRANGE);
> + bar2_writel(tegra, value, XUSB_BAR2_CSB_BASE_ADDR + ofs);
> +}
> +
> static int tegra_xusb_set_ss_clk(struct tegra_xusb *tegra,
> unsigned long rate)
> {
> @@ -451,6 +538,7 @@ static bool tegra_xusb_mbox_cmd_requires_ack(enum tegra_xusb_mbox_cmd cmd)
> static int tegra_xusb_mbox_send(struct tegra_xusb *tegra,
> const struct tegra_xusb_mbox_msg *msg)
> {
> + const struct tegra_xusb_soc_ops *ops = tegra->soc->ops;
> bool wait_for_idle = false;
> u32 value;
>
> @@ -459,15 +547,15 @@ static int tegra_xusb_mbox_send(struct tegra_xusb *tegra,
> * ACK/NAK messages.
> */
> if (!(msg->cmd == MBOX_CMD_ACK || msg->cmd == MBOX_CMD_NAK)) {
> - value = fpci_readl(tegra, tegra->soc->mbox.owner);
> + value = ops->mbox_reg_readl(tegra, tegra->soc->mbox.owner);
> if (value != MBOX_OWNER_NONE) {
> dev_err(tegra->dev, "mailbox is busy\n");
> return -EBUSY;
> }
>
> - fpci_writel(tegra, MBOX_OWNER_SW, tegra->soc->mbox.owner);
> + ops->mbox_reg_writel(tegra, MBOX_OWNER_SW, tegra->soc->mbox.owner);
>
> - value = fpci_readl(tegra, tegra->soc->mbox.owner);
> + value = ops->mbox_reg_readl(tegra, tegra->soc->mbox.owner);
> if (value != MBOX_OWNER_SW) {
> dev_err(tegra->dev, "failed to acquire mailbox\n");
> return -EBUSY;
> @@ -477,17 +565,17 @@ static int tegra_xusb_mbox_send(struct tegra_xusb *tegra,
> }
>
> value = tegra_xusb_mbox_pack(msg);
> - fpci_writel(tegra, value, tegra->soc->mbox.data_in);
> + ops->mbox_reg_writel(tegra, value, tegra->soc->mbox.data_in);
>
> - value = fpci_readl(tegra, tegra->soc->mbox.cmd);
> + value = ops->mbox_reg_readl(tegra, tegra->soc->mbox.cmd);
> value |= MBOX_INT_EN | MBOX_DEST_FALC;
> - fpci_writel(tegra, value, tegra->soc->mbox.cmd);
> + ops->mbox_reg_writel(tegra, value, tegra->soc->mbox.cmd);
>
> if (wait_for_idle) {
> unsigned long timeout = jiffies + msecs_to_jiffies(250);
>
> while (time_before(jiffies, timeout)) {
> - value = fpci_readl(tegra, tegra->soc->mbox.owner);
> + value = ops->mbox_reg_readl(tegra, tegra->soc->mbox.owner);
> if (value == MBOX_OWNER_NONE)
> break;
>
> @@ -495,7 +583,7 @@ static int tegra_xusb_mbox_send(struct tegra_xusb *tegra,
> }
>
> if (time_after(jiffies, timeout))
> - value = fpci_readl(tegra, tegra->soc->mbox.owner);
> + value = ops->mbox_reg_readl(tegra, tegra->soc->mbox.owner);
>
> if (value != MBOX_OWNER_NONE)
> return -ETIMEDOUT;
> @@ -507,11 +595,12 @@ static int tegra_xusb_mbox_send(struct tegra_xusb *tegra,
> static irqreturn_t tegra_xusb_mbox_irq(int irq, void *data)
> {
> struct tegra_xusb *tegra = data;
> + const struct tegra_xusb_soc_ops *ops = tegra->soc->ops;
> u32 value;
>
> /* clear mailbox interrupts */
> - value = fpci_readl(tegra, XUSB_CFG_ARU_SMI_INTR);
> - fpci_writel(tegra, value, XUSB_CFG_ARU_SMI_INTR);
> + value = ops->mbox_reg_readl(tegra, tegra->soc->mbox.smi_intr);
> + ops->mbox_reg_writel(tegra, value, tegra->soc->mbox.smi_intr);
>
> if (value & MBOX_SMI_INTR_FW_HANG)
> dev_err(tegra->dev, "controller firmware hang\n");
> @@ -664,6 +753,7 @@ static void tegra_xusb_mbox_handle(struct tegra_xusb *tegra,
> static irqreturn_t tegra_xusb_mbox_thread(int irq, void *data)
> {
> struct tegra_xusb *tegra = data;
> + const struct tegra_xusb_soc_ops *ops = tegra->soc->ops;
> struct tegra_xusb_mbox_msg msg;
> u32 value;
>
> @@ -672,16 +762,16 @@ static irqreturn_t tegra_xusb_mbox_thread(int irq, void *data)
> if (pm_runtime_suspended(tegra->dev) || tegra->suspended)
> goto out;
>
> - value = fpci_readl(tegra, tegra->soc->mbox.data_out);
> + value = ops->mbox_reg_readl(tegra, tegra->soc->mbox.data_out);
> tegra_xusb_mbox_unpack(&msg, value);
>
> - value = fpci_readl(tegra, tegra->soc->mbox.cmd);
> + value = ops->mbox_reg_readl(tegra, tegra->soc->mbox.cmd);
> value &= ~MBOX_DEST_SMI;
> - fpci_writel(tegra, value, tegra->soc->mbox.cmd);
> + ops->mbox_reg_writel(tegra, value, tegra->soc->mbox.cmd);
>
> /* clear mailbox owner if no ACK/NAK is required */
> if (!tegra_xusb_mbox_cmd_requires_ack(msg.cmd))
> - fpci_writel(tegra, MBOX_OWNER_NONE, tegra->soc->mbox.owner);
> + ops->mbox_reg_writel(tegra, MBOX_OWNER_NONE, tegra->soc->mbox.owner);
>
> tegra_xusb_mbox_handle(tegra, &msg);
>
> @@ -709,6 +799,15 @@ static void tegra_xusb_config(struct tegra_xusb *tegra)
> value |= regs & (XUSB_BASE_ADDR_MASK << XUSB_BASE_ADDR_SHIFT);
> fpci_writel(tegra, value, XUSB_CFG_4);
>
> + /* Program BAR2 space */
> + if (tegra->bar2) {
> + value = fpci_readl(tegra, XUSB_CFG_7);
> + value &= ~(XUSB_BASE2_ADDR_MASK << XUSB_BASE2_ADDR_SHIFT);
> + value |= tegra->bar2->start &
> + (XUSB_BASE2_ADDR_MASK << XUSB_BASE2_ADDR_SHIFT);
> + fpci_writel(tegra, value, XUSB_CFG_7);
> + }
> +
> usleep_range(100, 200);
>
> /* Enable bus master */
> @@ -881,21 +980,36 @@ static int tegra_xusb_request_firmware(struct tegra_xusb *tegra)
> return 0;
> }
>
> -static int tegra_xusb_load_firmware(struct tegra_xusb *tegra)
> +static int tegra_xusb_wait_for_falcon(struct tegra_xusb *tegra)
> +{
> + struct xhci_cap_regs __iomem *cap_regs;
> + struct xhci_op_regs __iomem *op_regs;
> + int ret;
> + u32 value;
> +
> + cap_regs = tegra->regs;
> + op_regs = tegra->regs + HC_LENGTH(readl(&cap_regs->hc_capbase));
> +
> + ret = readl_poll_timeout(&op_regs->status, value, !(value & STS_CNR), 1000, 200000);
> +
> + if (ret)
> + dev_err(tegra->dev, "XHCI Controller not ready. Falcon state: 0x%x\n",
> + csb_readl(tegra, XUSB_FALC_CPUCTL));
> +
> + return ret;
> +}
> +
> +static int tegra_xusb_load_firmware_rom(struct tegra_xusb *tegra)
> {
> unsigned int code_tag_blocks, code_size_blocks, code_blocks;
> - struct xhci_cap_regs __iomem *cap = tegra->regs;
> struct tegra_xusb_fw_header *header;
> struct device *dev = tegra->dev;
> - struct xhci_op_regs __iomem *op;
> - unsigned long timeout;
> time64_t timestamp;
> u64 address;
> u32 value;
> int err;
>
> header = (struct tegra_xusb_fw_header *)tegra->fw.virt;
> - op = tegra->regs + HC_LENGTH(readl(&cap->hc_capbase));
>
> if (csb_readl(tegra, XUSB_CSB_MP_ILOAD_BASE_LO) != 0) {
> dev_info(dev, "Firmware already loaded, Falcon state %#x\n",
> @@ -968,30 +1082,55 @@ static int tegra_xusb_load_firmware(struct tegra_xusb *tegra)
> /* Boot Falcon CPU and wait for USBSTS_CNR to get cleared. */
> csb_writel(tegra, CPUCTL_STARTCPU, XUSB_FALC_CPUCTL);
>
> - timeout = jiffies + msecs_to_jiffies(200);
> + if (tegra_xusb_wait_for_falcon(tegra))
> + return -EIO;
> +
> + timestamp = le32_to_cpu(header->fwimg_created_time);
>
> - do {
> - value = readl(&op->status);
> - if ((value & STS_CNR) == 0)
> - break;
> + dev_info(dev, "Firmware timestamp: %ptTs UTC\n", ×tamp);
> +
> + return 0;
> +}
> +
> +static u32 tegra_xusb_read_firmware_header(struct tegra_xusb *tegra, u32 offset)
> +{
> + /*
> + * We only accept reading the firmware config table
> + * The offset should not exceed the fw header structure
> + */
> + if (offset >= sizeof(struct tegra_xusb_fw_header))
> + return 0;
>
> - usleep_range(1000, 2000);
> - } while (time_is_after_jiffies(timeout));
> + bar2_writel(tegra, (FW_IOCTL_CFGTBL_READ << FW_IOCTL_TYPE_SHIFT) | offset,
> + XUSB_BAR2_ARU_FW_SCRATCH);
> + return bar2_readl(tegra, XUSB_BAR2_ARU_SMI_ARU_FW_SCRATCH_DATA0);
> +}
> +
> +static int tegra_xusb_init_ifr_firmware(struct tegra_xusb *tegra)
> +{
> + time64_t timestamp;
>
> - value = readl(&op->status);
> - if (value & STS_CNR) {
> - value = csb_readl(tegra, XUSB_FALC_CPUCTL);
> - dev_err(dev, "XHCI controller not read: %#010x\n", value);
> + if (tegra_xusb_wait_for_falcon(tegra))
> return -EIO;
> - }
>
> - timestamp = le32_to_cpu(header->fwimg_created_time);
> +#define offsetof_32(X, Y) ((u8)(offsetof(X, Y) / sizeof(__le32)))
> + timestamp = tegra_xusb_read_firmware_header(tegra,
> + offsetof_32(struct tegra_xusb_fw_header,
> + fwimg_created_time) << 2);
>
> - dev_info(dev, "Firmware timestamp: %ptTs UTC\n", ×tamp);
> + dev_info(tegra->dev, "Firmware timestamp: %ptTs UTC\n", ×tamp);
>
> return 0;
> }
>
> +static int tegra_xusb_load_firmware(struct tegra_xusb *tegra)
> +{
> + if (!tegra->soc->firmware)
> + return tegra_xusb_init_ifr_firmware(tegra);
> + else
> + return tegra_xusb_load_firmware_rom(tegra);
> +}
> +
> static void tegra_xusb_powerdomain_remove(struct device *dev,
> struct tegra_xusb *tegra)
> {
> @@ -1435,6 +1574,10 @@ static int tegra_xusb_probe(struct platform_device *pdev)
> tegra->ipfs_base = devm_platform_ioremap_resource(pdev, 2);
> if (IS_ERR(tegra->ipfs_base))
> return PTR_ERR(tegra->ipfs_base);
> + } else if (tegra->soc->has_bar2) {
> + tegra->bar2_base = devm_platform_get_and_ioremap_resource(pdev, 2, &tegra->bar2);
> + if (IS_ERR(tegra->bar2_base))
> + return PTR_ERR(tegra->bar2_base);
> }
>
> tegra->xhci_irq = platform_get_irq(pdev, 0);
> @@ -1651,10 +1794,13 @@ static int tegra_xusb_probe(struct platform_device *pdev)
> goto disable_phy;
> }
>
> - err = tegra_xusb_request_firmware(tegra);
> - if (err < 0) {
> - dev_err(&pdev->dev, "failed to request firmware: %d\n", err);
> - goto disable_phy;
> + if (tegra->soc->firmware) {
> + err = tegra_xusb_request_firmware(tegra);
> + if (err < 0) {
> + dev_err(&pdev->dev,
> + "failed to request firmware: %d\n", err);
> + goto disable_phy;
> + }
> }
>
> err = tegra_xusb_unpowergate_partitions(tegra);
> @@ -2271,6 +2417,13 @@ static const struct tegra_xusb_context_soc tegra124_xusb_context = {
> },
> };
>
> +static const struct tegra_xusb_soc_ops tegra124_ops = {
> + .mbox_reg_readl = &fpci_readl,
> + .mbox_reg_writel = &fpci_writel,
> + .csb_reg_readl = &fpci_csb_readl,
> + .csb_reg_writel = &fpci_csb_writel,
> +};
> +
> static const struct tegra_xusb_soc tegra124_soc = {
> .firmware = "nvidia/tegra124/xusb.bin",
> .supply_names = tegra124_supply_names,
> @@ -2286,11 +2439,13 @@ static const struct tegra_xusb_soc tegra124_soc = {
> .scale_ss_clock = true,
> .has_ipfs = true,
> .otg_reset_sspi = false,
> + .ops = &tegra124_ops,
> .mbox = {
> .cmd = 0xe4,
> .data_in = 0xe8,
> .data_out = 0xec,
> .owner = 0xf0,
> + .smi_intr = XUSB_CFG_ARU_SMI_INTR,
> },
> };
> MODULE_FIRMWARE("nvidia/tegra124/xusb.bin");
> @@ -2322,11 +2477,13 @@ static const struct tegra_xusb_soc tegra210_soc = {
> .scale_ss_clock = false,
> .has_ipfs = true,
> .otg_reset_sspi = true,
> + .ops = &tegra124_ops,
> .mbox = {
> .cmd = 0xe4,
> .data_in = 0xe8,
> .data_out = 0xec,
> .owner = 0xf0,
> + .smi_intr = XUSB_CFG_ARU_SMI_INTR,
> },
> };
> MODULE_FIRMWARE("nvidia/tegra210/xusb.bin");
> @@ -2363,11 +2520,13 @@ static const struct tegra_xusb_soc tegra186_soc = {
> .scale_ss_clock = false,
> .has_ipfs = false,
> .otg_reset_sspi = false,
> + .ops = &tegra124_ops,
> .mbox = {
> .cmd = 0xe4,
> .data_in = 0xe8,
> .data_out = 0xec,
> .owner = 0xf0,
> + .smi_intr = XUSB_CFG_ARU_SMI_INTR,
> },
> .lpm_support = true,
> };
> @@ -2394,21 +2553,56 @@ static const struct tegra_xusb_soc tegra194_soc = {
> .scale_ss_clock = false,
> .has_ipfs = false,
> .otg_reset_sspi = false,
> + .ops = &tegra124_ops,
> .mbox = {
> .cmd = 0x68,
> .data_in = 0x6c,
> .data_out = 0x70,
> .owner = 0x74,
> + .smi_intr = XUSB_CFG_ARU_SMI_INTR,
> },
> .lpm_support = true,
> };
> MODULE_FIRMWARE("nvidia/tegra194/xusb.bin");
>
> +static const struct tegra_xusb_soc_ops tegra234_ops = {
> + .mbox_reg_readl = &bar2_readl,
> + .mbox_reg_writel = &bar2_writel,
> + .csb_reg_readl = &bar2_csb_readl,
> + .csb_reg_writel = &bar2_csb_writel,
> +};
> +
> +static const struct tegra_xusb_soc tegra234_soc = {
> + .supply_names = tegra194_supply_names,
> + .num_supplies = ARRAY_SIZE(tegra194_supply_names),
> + .phy_types = tegra194_phy_types,
> + .num_types = ARRAY_SIZE(tegra194_phy_types),
> + .context = &tegra186_xusb_context,
> + .ports = {
> + .usb3 = { .offset = 0, .count = 4, },
> + .usb2 = { .offset = 4, .count = 4, },
> + },
> + .scale_ss_clock = false,
> + .has_ipfs = false,
> + .otg_reset_sspi = false,
> + .ops = &tegra234_ops,
> + .mbox = {
> + .cmd = XUSB_BAR2_ARU_MBOX_CMD,
> + .data_in = XUSB_BAR2_ARU_MBOX_DATA_IN,
> + .data_out = XUSB_BAR2_ARU_MBOX_DATA_OUT,
> + .owner = XUSB_BAR2_ARU_MBOX_OWNER,
> + .smi_intr = XUSB_BAR2_ARU_SMI_INTR,
> + },
> + .lpm_support = true,
> + .has_bar2 = true,
> +};
> +
> static const struct of_device_id tegra_xusb_of_match[] = {
> { .compatible = "nvidia,tegra124-xusb", .data = &tegra124_soc },
> { .compatible = "nvidia,tegra210-xusb", .data = &tegra210_soc },
> { .compatible = "nvidia,tegra186-xusb", .data = &tegra186_soc },
> { .compatible = "nvidia,tegra194-xusb", .data = &tegra194_soc },
> + { .compatible = "nvidia,tegra234-xusb", .data = &tegra234_soc },
> { },
> };
> MODULE_DEVICE_TABLE(of, tegra_xusb_of_match);
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Thanks
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 13/13] usb: gadget: tegra-xudc: Add Tegra234 support
2022-11-14 12:40 ` [PATCH v3 13/13] usb: gadget: tegra-xudc: Add Tegra234 support Wayne Chang
@ 2022-11-15 12:23 ` Jon Hunter
0 siblings, 0 replies; 40+ messages in thread
From: Jon Hunter @ 2022-11-15 12:23 UTC (permalink / raw)
To: Wayne Chang, gregkh, robh+dt, krzysztof.kozlowski+dt, treding,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
On 14/11/2022 12:40, Wayne Chang wrote:
> From: Sing-Han Chen <singhanc@nvidia.com>
>
> This commit adds support for XUSB device mode controller support on
> Tegra234 SoC. This is very similar to the existing Tegra194 XUDC.
>
> Signed-off-by: Sing-Han Chen <singhanc@nvidia.com>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
> ---
> V2 -> V3:nothing has changed
> V1 -> V2:nothing has changed
> drivers/usb/gadget/udc/tegra-xudc.c | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c
> index 76919d7570d2..ff697190469b 100644
> --- a/drivers/usb/gadget/udc/tegra-xudc.c
> +++ b/drivers/usb/gadget/udc/tegra-xudc.c
> @@ -3660,6 +3660,19 @@ static struct tegra_xudc_soc tegra194_xudc_soc_data = {
> .has_ipfs = false,
> };
>
> +static struct tegra_xudc_soc tegra234_xudc_soc_data = {
> + .clock_names = tegra186_xudc_clock_names,
> + .num_clks = ARRAY_SIZE(tegra186_xudc_clock_names),
> + .num_phys = 4,
> + .u1_enable = true,
> + .u2_enable = true,
> + .lpm_enable = true,
> + .invalid_seq_num = false,
> + .pls_quirk = false,
> + .port_reset_quirk = false,
> + .has_ipfs = false,
> +};
> +
> static const struct of_device_id tegra_xudc_of_match[] = {
> {
> .compatible = "nvidia,tegra210-xudc",
> @@ -3673,6 +3686,10 @@ static const struct of_device_id tegra_xudc_of_match[] = {
> .compatible = "nvidia,tegra194-xudc",
> .data = &tegra194_xudc_soc_data
> },
> + {
> + .compatible = "nvidia,tegra234-xudc",
> + .data = &tegra234_xudc_soc_data
> + },
> { }
> };
> MODULE_DEVICE_TABLE(of, tegra_xudc_of_match);
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Thanks
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 07/13] i2c: nvidia-gpu: Add cypress,firmware-build as a well-known regex
2022-11-14 12:40 ` [PATCH v3 07/13] i2c: nvidia-gpu: " Wayne Chang
2022-11-15 12:18 ` Jon Hunter
@ 2022-11-15 20:52 ` Wolfram Sang
1 sibling, 0 replies; 40+ messages in thread
From: Wolfram Sang @ 2022-11-15 20:52 UTC (permalink / raw)
To: Wayne Chang
Cc: gregkh, robh+dt, krzysztof.kozlowski+dt, treding, jonathanh,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo, linux-usb, devicetree, linux-kernel,
singhanc, linux-i2c, linux-phy, linux-tegra
[-- Attachment #1: Type: text/plain, Size: 484 bytes --]
On Mon, Nov 14, 2022 at 08:40:47PM +0800, Wayne Chang wrote:
> ccgx is refer to the cypress cypd4226 typec controller.
> add cypress,firmware-build as a well-known regex.
>
> 16-bit value is not sufficient for descriptiva names.
> Using string instead of u16 to make it more descriptive.
>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
I assume this series goes upstream as a whole via some tree. So, for the
I2C changes:
Acked-by: Wolfram Sang <wsa@kernel.org>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 09/13] i2c: nvidia-gpu: Remove ccgx,firmware-build property
2022-11-14 12:40 ` [PATCH v3 09/13] i2c: nvidia-gpu: " Wayne Chang
2022-11-15 12:19 ` Jon Hunter
@ 2022-11-15 20:53 ` Wolfram Sang
1 sibling, 0 replies; 40+ messages in thread
From: Wolfram Sang @ 2022-11-15 20:53 UTC (permalink / raw)
To: Wayne Chang
Cc: gregkh, robh+dt, krzysztof.kozlowski+dt, treding, jonathanh,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo, linux-usb, devicetree, linux-kernel,
singhanc, linux-i2c, linux-phy, linux-tegra
[-- Attachment #1: Type: text/plain, Size: 265 bytes --]
On Mon, Nov 14, 2022 at 08:40:49PM +0800, Wayne Chang wrote:
> Remove the property ccgx,firmware-build as we have added well-known
> regex cypress,firmware-build.
>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 05/13] usb: typec: ucsi_ccg: Add OF support
2022-11-14 12:40 ` [PATCH v3 05/13] usb: typec: ucsi_ccg: Add OF support Wayne Chang
2022-11-15 12:17 ` Jon Hunter
@ 2022-11-16 12:37 ` Heikki Krogerus
2022-11-16 12:54 ` Heikki Krogerus
2 siblings, 0 replies; 40+ messages in thread
From: Heikki Krogerus @ 2022-11-16 12:37 UTC (permalink / raw)
To: Wayne Chang
Cc: gregkh, robh+dt, krzysztof.kozlowski+dt, treding, jonathanh,
thierry.reding, ajayg, vkoul, p.zabel, balbi, mathias.nyman,
jckuo, linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
On Mon, Nov 14, 2022 at 08:40:45PM +0800, Wayne Chang wrote:
> The change enables the device tree infrastructure support.
>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> ---
> V2 -> V3:nothing has changed
> V1 -> V2:nothing has changed
> drivers/usb/typec/ucsi/ucsi_ccg.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
> index 835f1c4372ba..139707a2f3d6 100644
> --- a/drivers/usb/typec/ucsi/ucsi_ccg.c
> +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
> @@ -643,7 +643,7 @@ static int ccg_request_irq(struct ucsi_ccg *uc)
> {
> unsigned long flags = IRQF_ONESHOT;
>
> - if (!has_acpi_companion(uc->dev))
> + if (!dev_fwnode(uc->dev))
> flags |= IRQF_TRIGGER_HIGH;
>
> return request_threaded_irq(uc->irq, NULL, ccg_irq_handler, flags, dev_name(uc->dev), uc);
> @@ -1427,6 +1427,12 @@ static void ucsi_ccg_remove(struct i2c_client *client)
> free_irq(uc->irq, uc);
> }
>
> +static const struct of_device_id ucsi_ccg_of_match_table[] = {
> + { .compatible = "cypress,cypd4226", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, ucsi_ccg_of_match_table);
> +
> static const struct i2c_device_id ucsi_ccg_device_id[] = {
> {"ccgx-ucsi", 0},
> {}
> @@ -1481,6 +1487,7 @@ static struct i2c_driver ucsi_ccg_driver = {
> .pm = &ucsi_ccg_pm,
> .dev_groups = ucsi_ccg_groups,
> .acpi_match_table = amd_i2c_ucsi_match,
> + .of_match_table = ucsi_ccg_of_match_table,
> },
> .probe = ucsi_ccg_probe,
> .remove = ucsi_ccg_remove,
thanks,
--
heikki
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 05/13] usb: typec: ucsi_ccg: Add OF support
2022-11-14 12:40 ` [PATCH v3 05/13] usb: typec: ucsi_ccg: Add OF support Wayne Chang
2022-11-15 12:17 ` Jon Hunter
2022-11-16 12:37 ` Heikki Krogerus
@ 2022-11-16 12:54 ` Heikki Krogerus
2 siblings, 0 replies; 40+ messages in thread
From: Heikki Krogerus @ 2022-11-16 12:54 UTC (permalink / raw)
To: Wayne Chang
Cc: gregkh, robh+dt, krzysztof.kozlowski+dt, treding, jonathanh,
thierry.reding, ajayg, vkoul, p.zabel, balbi, mathias.nyman,
jckuo, linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
On Mon, Nov 14, 2022 at 08:40:45PM +0800, Wayne Chang wrote:
> The change enables the device tree infrastructure support.
>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
> ---
> V2 -> V3:nothing has changed
> V1 -> V2:nothing has changed
> drivers/usb/typec/ucsi/ucsi_ccg.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
> index 835f1c4372ba..139707a2f3d6 100644
> --- a/drivers/usb/typec/ucsi/ucsi_ccg.c
> +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
> @@ -643,7 +643,7 @@ static int ccg_request_irq(struct ucsi_ccg *uc)
> {
> unsigned long flags = IRQF_ONESHOT;
>
> - if (!has_acpi_companion(uc->dev))
> + if (!dev_fwnode(uc->dev))
> flags |= IRQF_TRIGGER_HIGH;
Sorry, I had to double check this, and the above does not work after
all. In the function i2c_new_ccgx_ucsi() the device is given a fwnode
(of type software_node).
So that probable has to be changed to:
if (is_software_node(dev_fwnode(uc->dev)))
flags |= IRQF_TRIGGER_HIGH;
> return request_threaded_irq(uc->irq, NULL, ccg_irq_handler, flags, dev_name(uc->dev), uc);
> @@ -1427,6 +1427,12 @@ static void ucsi_ccg_remove(struct i2c_client *client)
> free_irq(uc->irq, uc);
> }
>
> +static const struct of_device_id ucsi_ccg_of_match_table[] = {
> + { .compatible = "cypress,cypd4226", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, ucsi_ccg_of_match_table);
> +
> static const struct i2c_device_id ucsi_ccg_device_id[] = {
> {"ccgx-ucsi", 0},
> {}
> @@ -1481,6 +1487,7 @@ static struct i2c_driver ucsi_ccg_driver = {
> .pm = &ucsi_ccg_pm,
> .dev_groups = ucsi_ccg_groups,
> .acpi_match_table = amd_i2c_ucsi_match,
> + .of_match_table = ucsi_ccg_of_match_table,
> },
> .probe = ucsi_ccg_probe,
> .remove = ucsi_ccg_remove,
thanks,
--
heikki
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 01/13] dt-bindings: usb: tegra-xudc: Add Tegra234 XUSB controller support
2022-11-14 12:40 ` [PATCH v3 01/13] dt-bindings: usb: tegra-xudc: Add Tegra234 XUSB controller support Wayne Chang
2022-11-15 12:14 ` Jon Hunter
@ 2022-11-16 21:05 ` Rob Herring
2022-11-17 12:05 ` Jon Hunter
1 sibling, 1 reply; 40+ messages in thread
From: Rob Herring @ 2022-11-16 21:05 UTC (permalink / raw)
To: Wayne Chang
Cc: gregkh, krzysztof.kozlowski+dt, treding, jonathanh,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo, linux-usb, devicetree, linux-kernel,
singhanc, linux-i2c, linux-phy, linux-tegra
On Mon, Nov 14, 2022 at 08:40:41PM +0800, Wayne Chang wrote:
> Extend the Tegra XUSB controller device tree binding with Tegra234
> support.
Why do you need any order and number of phys? Please explain in the
commit msg.
>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
> ---
> V2 -> V3:nothing has changed
> V1 -> V2:address the issue on phy-names property
> .../bindings/usb/nvidia,tegra-xudc.yaml | 24 ++++++++++++-------
> 1 file changed, 16 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
> index fd6e7c81426e..52488a731c4e 100644
> --- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
> +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
> @@ -22,6 +22,7 @@ properties:
> - nvidia,tegra210-xudc # For Tegra210
> - nvidia,tegra186-xudc # For Tegra186
> - nvidia,tegra194-xudc # For Tegra194
> + - nvidia,tegra234-xudc # For Tegra234
>
> reg:
> minItems: 2
> @@ -90,21 +91,27 @@ properties:
>
> phys:
> minItems: 1
> + maxItems: 8
> description:
> Must contain an entry for each entry in phy-names.
> See ../phy/phy-bindings.txt for details.
>
> phy-names:
> minItems: 1
> + maxItems: 8
> items:
> - - const: usb2-0
> - - const: usb2-1
> - - const: usb2-2
> - - const: usb2-3
> - - const: usb3-0
> - - const: usb3-1
> - - const: usb3-2
> - - const: usb3-3
> + enum:
> + - usb2-0
> + - usb2-1
> + - usb2-2
> + - usb2-3
> + - usb3-0
> + - usb3-1
> + - usb3-2
> + - usb3-3
> +
> + dma-coherent:
> + type: boolean
>
> avddio-usb-supply:
> description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
> @@ -153,6 +160,7 @@ allOf:
> enum:
> - nvidia,tegra186-xudc
> - nvidia,tegra194-xudc
> + - nvidia,tegra234-xudc
> then:
> properties:
> reg:
> --
> 2.25.1
>
>
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 03/13] dt-bindings: usb: Add binding for Cypress cypd4226 I2C driver
2022-11-14 12:40 ` [PATCH v3 03/13] dt-bindings: usb: Add binding for Cypress cypd4226 I2C driver Wayne Chang
2022-11-15 12:15 ` Jon Hunter
@ 2022-11-16 21:14 ` Rob Herring
1 sibling, 0 replies; 40+ messages in thread
From: Rob Herring @ 2022-11-16 21:14 UTC (permalink / raw)
To: Wayne Chang
Cc: gregkh, krzysztof.kozlowski+dt, treding, jonathanh,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo, linux-usb, devicetree, linux-kernel,
singhanc, linux-i2c, linux-phy, linux-tegra
On Mon, Nov 14, 2022 at 08:40:43PM +0800, Wayne Chang wrote:
> add device-tree binding documentation for Cypress cypd4226 type-C
> controller's I2C interface. It is a standard I2C slave with GPIO
> input as IRQ interface.
For the subject:
dt-bindings: usb: Add Cypress cypd4226 Type-C controller
>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
> ---
> V2 -> V3:fix additionalProperties warning on new schema
> V1 -> V2:based on the review comments. Fix some addressed issues on
> description, interrupts, cypress,firmware-build, connector, and
> additionalProperties properties. And also remove the status in the example.
> .../bindings/usb/cypress,cypd4226.yaml | 86 +++++++++++++++++++
> 1 file changed, 86 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
>
> diff --git a/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
> new file mode 100644
> index 000000000000..854fe2f9181c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
> @@ -0,0 +1,86 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/cypress,cypd4226.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cypress cypd4226 UCSI I2C Type-C Controller
> +
> +maintainers:
> + - Wayne Chang <waynec@nvidia.com>
> +
> +description:
> + The Cypress cypd4226 UCSI I2C type-C controller is a I2C interface type-C
> + controller.
> +
> +properties:
> + compatible:
> + const: cypress,cypd4226
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + reg:
> + const: 0x08
> +
> + interrupts:
> + items:
> + - description: cypd4226 I2C interrupt
> +
> + cypress,firmware-build:
> + enum:
> + - nvidia,gpu
> + - nvidia,jetson-agx-xavier
> + description: |
> + the name of the CCGx firmware built for product series.
> + should be set one of following:
> + - "nvidia,gpu" for the NVIDIA RTX product series
> + - "nvidia,jetson-agx-xavier" for the NVIDIA Jetson product series
Standard 'firmware-name' property doesn't work for you?
> +
> +patternProperties:
> + '^connector@[0-1]+$':
> + $ref: /schemas/connector/usb-connector.yaml#
> + properties:
> + reg:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/tegra194-gpio.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <2>;
> +
> + ucsi-ccg@8 {
> + compatible = "cypress,cypd4226";
> + interrupt-parent = <&gpio_aon>;
> + interrupts = <TEGRA194_AON_GPIO(BB, 2) IRQ_TYPE_LEVEL_LOW>;
> + reg = <0x08>;
> + cypress,firmware-build = "nvidia,jetson-agx-xavier";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + ccg_typec_con0: connector@0 {
> + compatible = "usb-c-connector";
> + reg = <0>;
> + label = "USB-C";
> + data-role = "dual";
> + port {
> + ucsi_ccg_p0: endpoint {
> + remote-endpoint = <&usb_role_switch0>;
> + };
> + };
> + };
> + };
> + };
> --
> 2.25.1
>
>
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 01/13] dt-bindings: usb: tegra-xudc: Add Tegra234 XUSB controller support
2022-11-16 21:05 ` Rob Herring
@ 2022-11-17 12:05 ` Jon Hunter
0 siblings, 0 replies; 40+ messages in thread
From: Jon Hunter @ 2022-11-17 12:05 UTC (permalink / raw)
To: Rob Herring, Wayne Chang
Cc: gregkh, krzysztof.kozlowski+dt, treding, thierry.reding,
heikki.krogerus, ajayg, vkoul, p.zabel, balbi, mathias.nyman,
jckuo, linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
On 16/11/2022 21:05, Rob Herring wrote:
> On Mon, Nov 14, 2022 at 08:40:41PM +0800, Wayne Chang wrote:
>> Extend the Tegra XUSB controller device tree binding with Tegra234
>> support.
>
> Why do you need any order and number of phys? Please explain in the
> commit msg.
I have been having a quick look at this and for the devices that
this binding is applicable to, they only support one port for USB2
and one port for USB3. So I don't think that we should have all
these ports defined in this binding doc. So ideally, we should have
...
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
index 52488a731c4e..031796b68bbb 100644
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
@@ -98,17 +98,9 @@ properties:
phy-names:
minItems: 1
- maxItems: 8
items:
- enum:
- - usb2-0
- - usb2-1
- - usb2-2
- - usb2-3
- - usb3-0
- - usb3-1
- - usb3-2
- - usb3-3
+ - const: usb2
+ - const: usb3
dma-coherent:
type: boolean
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index 0556bc64287d..349a98119608 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -2128,7 +2128,7 @@ usb@3550000 {
phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>;
- phy-names = "usb2-0", "usb3-1";
+ phy-names = "usb2", "usb3";
};
usb@3610000 {
Jon
--
nvpublic
^ permalink raw reply related [flat|nested] 40+ messages in thread
* Re: [PATCH v3 06/13] usb: typec: ucsi_ccg: Add cypress,firmware-build as a well-known regex
2022-11-14 12:40 ` [PATCH v3 06/13] usb: typec: ucsi_ccg: Add cypress,firmware-build as a well-known regex Wayne Chang
2022-11-15 12:18 ` Jon Hunter
@ 2022-11-17 19:45 ` Jon Hunter
1 sibling, 0 replies; 40+ messages in thread
From: Jon Hunter @ 2022-11-17 19:45 UTC (permalink / raw)
To: Wayne Chang, gregkh, robh+dt, krzysztof.kozlowski+dt, treding,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
On 14/11/2022 12:40, Wayne Chang wrote:
> ccgx is refer to the cypress cypd4226 typec controller.
> add cypress,firmware-build as a well-known regex.
>
> 16-bit value is not sufficient for descriptiva names.
> Using string instead of u16 to make it more descriptive.
>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
> ---
> V2 -> V3:nothing has changed
> V1 -> V2:new change added for adding cypress,firmware-build
> drivers/usb/typec/ucsi/ucsi_ccg.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
> index 139707a2f3d6..e412a457bbfc 100644
> --- a/drivers/usb/typec/ucsi/ucsi_ccg.c
> +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
> @@ -1343,6 +1343,7 @@ static int ucsi_ccg_probe(struct i2c_client *client,
> {
> struct device *dev = &client->dev;
> struct ucsi_ccg *uc;
> + const char *of_fw_build;
> int status;
>
> uc = devm_kzalloc(dev, sizeof(*uc), GFP_KERNEL);
> @@ -1363,6 +1364,17 @@ static int ucsi_ccg_probe(struct i2c_client *client,
> if (status)
> dev_err(uc->dev, "failed to get FW build information\n");
>
> + status = device_property_read_string(dev, "cypress,firmware-build",
> + &of_fw_build);
> + if (!status) {
> + if (!strcmp(of_fw_build, "nvidia,jetson-agx-xavier"))
> + uc->fw_build = CCG_FW_BUILD_NVIDIA_TEGRA;
> + else if (!strcmp(of_fw_build, "nvidia,gpu"))
> + uc->fw_build = CCG_FW_BUILD_NVIDIA;
> + } else {
> + dev_err(uc->dev, "failed to get FW build information\n");
> + }
> +
Instead of having the 'else' clause above, we should just ...
if (!uc->fw_build)
dev_err(uc->dev, "failed to get FW build information\n");
It is possible that status == 0, but the fw_build is not
recognised/supported and so 'uc->fw_build' is not set.
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 02/13] dt-bindings: usb: Add NVIDIA Tegra234 XUSB host controller binding
2022-11-14 19:16 ` Rob Herring
@ 2022-11-18 11:47 ` Jon Hunter
2022-11-18 14:20 ` Thierry Reding
0 siblings, 1 reply; 40+ messages in thread
From: Jon Hunter @ 2022-11-18 11:47 UTC (permalink / raw)
To: Rob Herring, Wayne Chang
Cc: linux-kernel, ajayg, singhanc, devicetree, thierry.reding,
treding, linux-tegra, krzysztof.kozlowski+dt, linux-i2c,
linux-phy, linux-usb, robh+dt, jckuo, heikki.krogerus, gregkh,
vkoul, balbi, p.zabel, mathias.nyman
Hi Rob,
On 14/11/2022 19:16, Rob Herring wrote:
>
> On Mon, 14 Nov 2022 20:40:42 +0800, Wayne Chang wrote:
>> Add device-tree binding documentation for the XUSB host controller present
>> on Tegra234 SoC. This controller supports the USB 3.1 specification.
>>
>> Signed-off-by: Wayne Chang <waynec@nvidia.com>
>> ---
>> depends on the following change
>> https://lore.kernel.org/all/20221003125141.123759-1-jonathanh@nvidia.com/
>> V2 -> V3:nothing has changed but added the dependency here
>> V1 -> V2:new change for adding nvidia,tegra234-xusb.yaml
>> .../bindings/usb/nvidia,tegra234-xusb.yaml | 159 ++++++++++++++++++
>> 1 file changed, 159 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml
>>
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> Error: Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.example.dts:36.27-28 syntax error
> FATAL ERROR: Unable to parse input tree
> make[1]: *** [scripts/Makefile.lib:406: Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.example.dtb] Error 1
> make[1]: *** Waiting for unfinished jobs....
> make: *** [Makefile:1492: dt_binding_check] Error 2
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/patch/
>
> This check can fail if there are any dependencies. The base for a patch
> series is generally the most recent rc1.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit.
I am very much responsible for this because of my patch [0] to get all
the necessary headers for Tegra234. I was hoping this would be a good
thing, but now I see this is a bit of a headache for maintainers.
So I am not sure what is a good way to handle this. We would like to get
this merged for v6.2, and so please let me know if this is OK with you?
Please note that this is similar to the other Tegra USB bindings you
have reviewed for v6.2.
Thanks
Jon
[0]
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git/commit/?h=for-6.2/dt-bindings&id=ea4777f6715016168cb72a1edc835dad480c8cfb
[1]
https://lore.kernel.org/linux-tegra/20221103144200.1479640-1-thierry.reding@gmail.com/
--
nvpublic
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 02/13] dt-bindings: usb: Add NVIDIA Tegra234 XUSB host controller binding
2022-11-18 11:47 ` Jon Hunter
@ 2022-11-18 14:20 ` Thierry Reding
0 siblings, 0 replies; 40+ messages in thread
From: Thierry Reding @ 2022-11-18 14:20 UTC (permalink / raw)
To: Jon Hunter
Cc: Rob Herring, Wayne Chang, linux-kernel, ajayg, singhanc,
devicetree, treding, linux-tegra, krzysztof.kozlowski+dt,
linux-i2c, linux-phy, linux-usb, robh+dt, jckuo, heikki.krogerus,
gregkh, vkoul, balbi, p.zabel, mathias.nyman
[-- Attachment #1: Type: text/plain, Size: 2751 bytes --]
On Fri, Nov 18, 2022 at 11:47:48AM +0000, Jon Hunter wrote:
> Hi Rob,
>
> On 14/11/2022 19:16, Rob Herring wrote:
> >
> > On Mon, 14 Nov 2022 20:40:42 +0800, Wayne Chang wrote:
> > > Add device-tree binding documentation for the XUSB host controller present
> > > on Tegra234 SoC. This controller supports the USB 3.1 specification.
> > >
> > > Signed-off-by: Wayne Chang <waynec@nvidia.com>
> > > ---
> > > depends on the following change
> > > https://lore.kernel.org/all/20221003125141.123759-1-jonathanh@nvidia.com/
> > > V2 -> V3:nothing has changed but added the dependency here
> > > V1 -> V2:new change for adding nvidia,tegra234-xusb.yaml
> > > .../bindings/usb/nvidia,tegra234-xusb.yaml | 159 ++++++++++++++++++
> > > 1 file changed, 159 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml
> > >
> >
> > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> > on your patch (DT_CHECKER_FLAGS is new in v5.13):
> >
> > yamllint warnings/errors:
> >
> > dtschema/dtc warnings/errors:
> > Error: Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.example.dts:36.27-28 syntax error
> > FATAL ERROR: Unable to parse input tree
> > make[1]: *** [scripts/Makefile.lib:406: Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.example.dtb] Error 1
> > make[1]: *** Waiting for unfinished jobs....
> > make: *** [Makefile:1492: dt_binding_check] Error 2
> >
> > doc reference errors (make refcheckdocs):
> >
> > See https://patchwork.ozlabs.org/patch/
> >
> > This check can fail if there are any dependencies. The base for a patch
> > series is generally the most recent rc1.
> >
> > If you already ran 'make dt_binding_check' and didn't see the above
> > error(s), then make sure 'yamllint' is installed and dt-schema is up to
> > date:
> >
> > pip3 install dtschema --upgrade
> >
> > Please check and re-submit.
>
>
> I am very much responsible for this because of my patch [0] to get all the
> necessary headers for Tegra234. I was hoping this would be a good thing, but
> now I see this is a bit of a headache for maintainers.
>
> So I am not sure what is a good way to handle this. We would like to get
> this merged for v6.2, and so please let me know if this is OK with you?
> Please note that this is similar to the other Tegra USB bindings you have
> reviewed for v6.2.
I think it'd be best for me to pick these up into the Tegra tree where
the dependency exists and where I already have the XUSB bindings
conversion patches for earlier chips. Looks like this is also not very
different from, say, the Tegra194 XUSB bindings, so should fit right in
there.
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 00/13] Enable USB host and device functions on Jetson
2022-11-14 12:40 [PATCH v3 00/13] Enable USB host and device functions on Jetson Wayne Chang
` (12 preceding siblings ...)
2022-11-14 12:40 ` [PATCH v3 13/13] usb: gadget: tegra-xudc: Add Tegra234 support Wayne Chang
@ 2022-11-18 15:44 ` Jon Hunter
13 siblings, 0 replies; 40+ messages in thread
From: Jon Hunter @ 2022-11-18 15:44 UTC (permalink / raw)
To: Wayne Chang, gregkh, robh+dt, krzysztof.kozlowski+dt, treding,
thierry.reding, heikki.krogerus, ajayg, vkoul, p.zabel, balbi,
mathias.nyman, jckuo
Cc: linux-usb, devicetree, linux-kernel, singhanc, linux-i2c,
linux-phy, linux-tegra
On 14/11/2022 12:40, Wayne Chang wrote:
> The patch series enable the USB host and devie functions on Jetson AGX Orin
> and depend on the following change
> https://lore.kernel.org/all/20221003125141.123759-1-jonathanh@nvidia.com/
I have been talking to Wayne about this series and for now we want to
see if we can get the USB host support merged. Then we will work on the
USB device support next. I have sent out the USB host patches on Wayne's
behalf.
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 10/13] phy: tegra: xusb: Disable trk clk when not in use
2022-11-14 12:40 ` [PATCH v3 10/13] phy: tegra: xusb: Disable trk clk when not in use Wayne Chang
2022-11-15 12:19 ` Jon Hunter
@ 2023-01-12 17:23 ` Vinod Koul
1 sibling, 0 replies; 40+ messages in thread
From: Vinod Koul @ 2023-01-12 17:23 UTC (permalink / raw)
To: Wayne Chang
Cc: gregkh, robh+dt, krzysztof.kozlowski+dt, treding, jonathanh,
thierry.reding, heikki.krogerus, ajayg, p.zabel, balbi,
mathias.nyman, jckuo, linux-usb, devicetree, linux-kernel,
singhanc, linux-i2c, linux-phy, linux-tegra
On 14-11-22, 20:40, Wayne Chang wrote:
> Pad tracking is a one-time calibration for Tegra186 and Tegra194.
> Clk should be disabled after calibration.
>
> Disable clk after calibration.
> While at it add 100us delay for HW recording the calibration value.
Applied, thanks
--
~Vinod
^ permalink raw reply [flat|nested] 40+ messages in thread
end of thread, other threads:[~2023-01-12 18:02 UTC | newest]
Thread overview: 40+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-14 12:40 [PATCH v3 00/13] Enable USB host and device functions on Jetson Wayne Chang
2022-11-14 12:40 ` [PATCH v3 01/13] dt-bindings: usb: tegra-xudc: Add Tegra234 XUSB controller support Wayne Chang
2022-11-15 12:14 ` Jon Hunter
2022-11-16 21:05 ` Rob Herring
2022-11-17 12:05 ` Jon Hunter
2022-11-14 12:40 ` [PATCH v3 02/13] dt-bindings: usb: Add NVIDIA Tegra234 XUSB host controller binding Wayne Chang
2022-11-14 19:16 ` Rob Herring
2022-11-18 11:47 ` Jon Hunter
2022-11-18 14:20 ` Thierry Reding
2022-11-15 12:14 ` Jon Hunter
2022-11-14 12:40 ` [PATCH v3 03/13] dt-bindings: usb: Add binding for Cypress cypd4226 I2C driver Wayne Chang
2022-11-15 12:15 ` Jon Hunter
2022-11-16 21:14 ` Rob Herring
2022-11-14 12:40 ` [PATCH v3 04/13] arm64: tegra: Enable XUSB host and device on Jetson AGX Orin Wayne Chang
2022-11-15 12:17 ` Jon Hunter
2022-11-14 12:40 ` [PATCH v3 05/13] usb: typec: ucsi_ccg: Add OF support Wayne Chang
2022-11-15 12:17 ` Jon Hunter
2022-11-16 12:37 ` Heikki Krogerus
2022-11-16 12:54 ` Heikki Krogerus
2022-11-14 12:40 ` [PATCH v3 06/13] usb: typec: ucsi_ccg: Add cypress,firmware-build as a well-known regex Wayne Chang
2022-11-15 12:18 ` Jon Hunter
2022-11-17 19:45 ` Jon Hunter
2022-11-14 12:40 ` [PATCH v3 07/13] i2c: nvidia-gpu: " Wayne Chang
2022-11-15 12:18 ` Jon Hunter
2022-11-15 20:52 ` Wolfram Sang
2022-11-14 12:40 ` [PATCH v3 08/13] usb: typec: ucsi_ccg: Remove ccgx,firmware-build property Wayne Chang
2022-11-15 12:19 ` Jon Hunter
2022-11-14 12:40 ` [PATCH v3 09/13] i2c: nvidia-gpu: " Wayne Chang
2022-11-15 12:19 ` Jon Hunter
2022-11-15 20:53 ` Wolfram Sang
2022-11-14 12:40 ` [PATCH v3 10/13] phy: tegra: xusb: Disable trk clk when not in use Wayne Chang
2022-11-15 12:19 ` Jon Hunter
2023-01-12 17:23 ` Vinod Koul
2022-11-14 12:40 ` [PATCH v3 11/13] phy: tegra: xusb: Add Tegra234 support Wayne Chang
2022-11-15 12:22 ` Jon Hunter
2022-11-14 12:40 ` [PATCH v3 12/13] usb: host: xhci-tegra: Add Tegra234 XHCI support Wayne Chang
2022-11-15 12:23 ` Jon Hunter
2022-11-14 12:40 ` [PATCH v3 13/13] usb: gadget: tegra-xudc: Add Tegra234 support Wayne Chang
2022-11-15 12:23 ` Jon Hunter
2022-11-18 15:44 ` [PATCH v3 00/13] Enable USB host and device functions on Jetson Jon Hunter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).