[PATCH v2 1/1] remoteproc: correct rproc_free_vring() to avoid invalid kernel paging

[PATCH v2 1/1] remoteproc: correct rproc_free_vring() to avoid invalid kernel paging

[Loic Pallardy]

If rproc_start() failed, rproc_resource_cleanup() is called to clean
debugfs entries, then associated iommu mappings, carveouts and vdev.
Issue occurs when rproc_free_vring() is trying to reset vring resource
table entry.
At this time, table_ptr is pointing on loaded resource table and carveouts
already released, so access to loaded resource table is generating a kernel
paging error:

[   12.696535] Unable to handle kernel paging request at virtual address f0f357cc
[   12.696540] pgd = (ptrval)
[   12.696542] [f0f357cc] *pgd=6d2d0811, *pte=00000000, *ppte=00000000
[   12.696558] Internal error: Oops: 807 [#1] SMP ARM
[   12.696563] Modules linked in: rpmsg_core v4l2_mem2mem videobuf2_dma_contig sti_drm v4l2_common vida
[   12.696598] CPU: 1 PID: 48 Comm: kworker/1:1 Tainted: G        W         4.18.0-rc2-00018-g3170fdd-8
[   12.696602] Hardware name: STi SoC with Flattened Device Tree
[   12.696625] Workqueue: events request_firmware_work_func
[   12.696659] PC is at rproc_free_vring+0x84/0xbc [remoteproc]
[   12.696667] LR is at rproc_free_vring+0x70/0xbc [remoteproc]

This patch proposes to simply remove reset of resource table vring entries,
as firmware and resource table are reloaded at each rproc boot.
rproc_trigger_recovery() not impacted as resources not touched during recovery
procedure.

Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
---
Changes from V1: typo fixes in commit message

 drivers/remoteproc/remoteproc_core.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index a9609d9..9a8b47c 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -289,16 +289,10 @@ void rproc_free_vring(struct rproc_vring *rvring)
 {
 	int size = PAGE_ALIGN(vring_size(rvring->len, rvring->align));
 	struct rproc *rproc = rvring->rvdev->rproc;
-	int idx = rvring->rvdev->vring - rvring;
-	struct fw_rsc_vdev *rsc;
 
 	dma_free_coherent(rproc->dev.parent, size, rvring->va, rvring->dma);
 	idr_remove(&rproc->notifyids, rvring->notifyid);
 
-	/* reset resource entry info */
-	rsc = (void *)rproc->table_ptr + rvring->rvdev->rsc_offset;
-	rsc->vring[idx].da = 0;
-	rsc->vring[idx].notifyid = -1;
 }
 
 static int rproc_vdev_do_probe(struct rproc_subdev *subdev)
-- 
1.9.1

Re: [PATCH v2 1/1] remoteproc: correct rproc_free_vring() to avoid invalid kernel paging

[Suman Anna]

Hi Loic,

On 07/06/2018 02:46 AM, Loic Pallardy wrote:
> If rproc_start() failed, rproc_resource_cleanup() is called to clean
> debugfs entries, then associated iommu mappings, carveouts and vdev.
> Issue occurs when rproc_free_vring() is trying to reset vring resource
> table entry.
> At this time, table_ptr is pointing on loaded resource table and carveouts
> already released, so access to loaded resource table is generating a kernel
> paging error:

Are you using a device specific CMA pool or carveout, and if so, where
the pool is? If not, where is the default CMA pool? I am trying to
reproduce the issue on my platform with the start failure as you
suggested, but haven't seen it so far. That said, I have seen the exact
same crash when using HighMEM CMA pools on my downstream kernel when
stopping the processor, and the root cause is essentially the same as
what you summarized here. The issue was present with LowMem pools as
well, but got masked because of the kernel linear mapping.

> 
> [   12.696535] Unable to handle kernel paging request at virtual address f0f357cc
> [   12.696540] pgd = (ptrval)
> [   12.696542] [f0f357cc] *pgd=6d2d0811, *pte=00000000, *ppte=00000000
> [   12.696558] Internal error: Oops: 807 [#1] SMP ARM
> [   12.696563] Modules linked in: rpmsg_core v4l2_mem2mem videobuf2_dma_contig sti_drm v4l2_common vida
> [   12.696598] CPU: 1 PID: 48 Comm: kworker/1:1 Tainted: G        W         4.18.0-rc2-00018-g3170fdd-8
> [   12.696602] Hardware name: STi SoC with Flattened Device Tree
> [   12.696625] Workqueue: events request_firmware_work_func
> [   12.696659] PC is at rproc_free_vring+0x84/0xbc [remoteproc]
> [   12.696667] LR is at rproc_free_vring+0x70/0xbc [remoteproc]
> 
> This patch proposes to simply remove reset of resource table vring entries,
> as firmware and resource table are reloaded at each rproc boot.
> rproc_trigger_recovery() not impacted as resources not touched during recovery
> procedure.

And error recovery doesn't work for me after the rproc_start, stop got
introduced.

regards
Suman

> 
> Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
> ---
> Changes from V1: typo fixes in commit message
> 
>  drivers/remoteproc/remoteproc_core.c | 6 ------
>  1 file changed, 6 deletions(-)
> 
> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> index a9609d9..9a8b47c 100644
> --- a/drivers/remoteproc/remoteproc_core.c
> +++ b/drivers/remoteproc/remoteproc_core.c
> @@ -289,16 +289,10 @@ void rproc_free_vring(struct rproc_vring *rvring)
>  {
>  	int size = PAGE_ALIGN(vring_size(rvring->len, rvring->align));
>  	struct rproc *rproc = rvring->rvdev->rproc;
> -	int idx = rvring->rvdev->vring - rvring;
> -	struct fw_rsc_vdev *rsc;
>  
>  	dma_free_coherent(rproc->dev.parent, size, rvring->va, rvring->dma);
>  	idr_remove(&rproc->notifyids, rvring->notifyid);
>  
> -	/* reset resource entry info */
> -	rsc = (void *)rproc->table_ptr + rvring->rvdev->rsc_offset;
> -	rsc->vring[idx].da = 0;
> -	rsc->vring[idx].notifyid = -1;
>  }
>  
>  static int rproc_vdev_do_probe(struct rproc_subdev *subdev)
> 

RE: [PATCH v2 1/1] remoteproc: correct rproc_free_vring() to avoid invalid kernel paging

[Loic PALLARDY]

Hi Suman,

> -----Original Message-----
> From: Suman Anna <s-anna@ti.com>
> Sent: Thursday, July 26, 2018 12:09 AM
> To: Loic PALLARDY <loic.pallardy@st.com>; bjorn.andersson@linaro.org;
> ohad@wizery.com
> Cc: linux-remoteproc@vger.kernel.org; linux-kernel@vger.kernel.org;
> Arnaud POULIQUEN <arnaud.pouliquen@st.com>;
> benjamin.gaignard@linaro.org
> Subject: Re: [PATCH v2 1/1] remoteproc: correct rproc_free_vring() to avoid
> invalid kernel paging
> 
> Hi Loic,
> 
> On 07/06/2018 02:46 AM, Loic Pallardy wrote:
> > If rproc_start() failed, rproc_resource_cleanup() is called to clean
> > debugfs entries, then associated iommu mappings, carveouts and vdev.
> > Issue occurs when rproc_free_vring() is trying to reset vring resource
> > table entry.
> > At this time, table_ptr is pointing on loaded resource table and carveouts
> > already released, so access to loaded resource table is generating a kernel
> > paging error:
> 
> Are you using a device specific CMA pool or carveout, and if so, where
> the pool is? If not, where is the default CMA pool? I am trying to
> reproduce the issue on my platform with the start failure as you
> suggested, but haven't seen it so far. That said, I have seen the exact
> same crash when using HighMEM CMA pools on my downstream kernel
> when
> stopping the processor, and the root cause is essentially the same as
> what you summarized here. The issue was present with LowMem pools as
> well, but got masked because of the kernel linear mapping.

I have a carveout declared in firmware resource table for co-processor code and data, and st driver has a specific 
reserved memory region to fit fix address space requested by co-processor.
So CPU access to code and loaded resource table area is granted thanks to allocation done by rproc_handle_carveout().

> 
> >
> > [   12.696535] Unable to handle kernel paging request at virtual address
> f0f357cc
> > [   12.696540] pgd = (ptrval)
> > [   12.696542] [f0f357cc] *pgd=6d2d0811, *pte=00000000, *ppte=00000000
> > [   12.696558] Internal error: Oops: 807 [#1] SMP ARM
> > [   12.696563] Modules linked in: rpmsg_core v4l2_mem2mem
> videobuf2_dma_contig sti_drm v4l2_common vida
> > [   12.696598] CPU: 1 PID: 48 Comm: kworker/1:1 Tainted: G        W
> 4.18.0-rc2-00018-g3170fdd-8
> > [   12.696602] Hardware name: STi SoC with Flattened Device Tree
> > [   12.696625] Workqueue: events request_firmware_work_func
> > [   12.696659] PC is at rproc_free_vring+0x84/0xbc [remoteproc]
> > [   12.696667] LR is at rproc_free_vring+0x70/0xbc [remoteproc]
> >
> > This patch proposes to simply remove reset of resource table vring entries,
> > as firmware and resource table are reloaded at each rproc boot.
> > rproc_trigger_recovery() not impacted as resources not touched during
> recovery
> > procedure.
> 
> And error recovery doesn't work for me after the rproc_start, stop got
> introduced.
Recovery no available on B2260, but I'll test it on another platform this week

Regards,
Loic
> 
> regards
> Suman
> 
> >
> > Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
> > ---
> > Changes from V1: typo fixes in commit message
> >
> >  drivers/remoteproc/remoteproc_core.c | 6 ------
> >  1 file changed, 6 deletions(-)
> >
> > diff --git a/drivers/remoteproc/remoteproc_core.c
> b/drivers/remoteproc/remoteproc_core.c
> > index a9609d9..9a8b47c 100644
> > --- a/drivers/remoteproc/remoteproc_core.c
> > +++ b/drivers/remoteproc/remoteproc_core.c
> > @@ -289,16 +289,10 @@ void rproc_free_vring(struct rproc_vring *rvring)
> >  {
> >  	int size = PAGE_ALIGN(vring_size(rvring->len, rvring->align));
> >  	struct rproc *rproc = rvring->rvdev->rproc;
> > -	int idx = rvring->rvdev->vring - rvring;
> > -	struct fw_rsc_vdev *rsc;
> >
> >  	dma_free_coherent(rproc->dev.parent, size, rvring->va, rvring-
> >dma);
> >  	idr_remove(&rproc->notifyids, rvring->notifyid);
> >
> > -	/* reset resource entry info */
> > -	rsc = (void *)rproc->table_ptr + rvring->rvdev->rsc_offset;
> > -	rsc->vring[idx].da = 0;
> > -	rsc->vring[idx].notifyid = -1;
> >  }
> >
> >  static int rproc_vdev_do_probe(struct rproc_subdev *subdev)
> >

Re: [PATCH v2 1/1] remoteproc: correct rproc_free_vring() to avoid invalid kernel paging

[Suman Anna]

Hi Loic,

On 07/26/2018 02:48 AM, Loic PALLARDY wrote:
> Hi Suman,
>>
>> Hi Loic,
>>
>> On 07/06/2018 02:46 AM, Loic Pallardy wrote:
>>> If rproc_start() failed, rproc_resource_cleanup() is called to clean
>>> debugfs entries, then associated iommu mappings, carveouts and vdev.
>>> Issue occurs when rproc_free_vring() is trying to reset vring resource
>>> table entry.
>>> At this time, table_ptr is pointing on loaded resource table and carveouts
>>> already released, so access to loaded resource table is generating a kernel
>>> paging error:
>>
>> Are you using a device specific CMA pool or carveout, and if so, where
>> the pool is? If not, where is the default CMA pool? I am trying to
>> reproduce the issue on my platform with the start failure as you
>> suggested, but haven't seen it so far. That said, I have seen the exact
>> same crash when using HighMEM CMA pools on my downstream kernel
>> when
>> stopping the processor, and the root cause is essentially the same as
>> what you summarized here. The issue was present with LowMem pools as
>> well, but got masked because of the kernel linear mapping.
> 
> I have a carveout declared in firmware resource table for co-processor code and data, and st driver has a specific 
> reserved memory region to fit fix address space requested by co-processor.
> So CPU access to code and loaded resource table area is granted thanks to allocation done by rproc_handle_carveout().

Where are the vrings getting allocated from?

In anycase, I prefer that we should actually reset the table_ptr in
rproc_start() in failure cases (undo the operation essentially) as we
don't call rproc_stop() in those cases. This will result in symmetric
code. We already have the reset handled in rproc_stop() added recently
in commit 0a8b81cb2e41 ("remoteproc: Reset table_ptr on stop"). Let me
know what you think, I can send a quick patch.

regards
Suman

> 
>>
>>>
>>> [   12.696535] Unable to handle kernel paging request at virtual address
>> f0f357cc
>>> [   12.696540] pgd = (ptrval)
>>> [   12.696542] [f0f357cc] *pgd=6d2d0811, *pte=00000000, *ppte=00000000
>>> [   12.696558] Internal error: Oops: 807 [#1] SMP ARM
>>> [   12.696563] Modules linked in: rpmsg_core v4l2_mem2mem
>> videobuf2_dma_contig sti_drm v4l2_common vida
>>> [   12.696598] CPU: 1 PID: 48 Comm: kworker/1:1 Tainted: G        W
>> 4.18.0-rc2-00018-g3170fdd-8
>>> [   12.696602] Hardware name: STi SoC with Flattened Device Tree
>>> [   12.696625] Workqueue: events request_firmware_work_func
>>> [   12.696659] PC is at rproc_free_vring+0x84/0xbc [remoteproc]
>>> [   12.696667] LR is at rproc_free_vring+0x70/0xbc [remoteproc]
>>>
>>> This patch proposes to simply remove reset of resource table vring entries,
>>> as firmware and resource table are reloaded at each rproc boot.
>>> rproc_trigger_recovery() not impacted as resources not touched during
>> recovery
>>> procedure.
>>
>> And error recovery doesn't work for me after the rproc_start, stop got
>> introduced.
> Recovery no available on B2260, but I'll test it on another platform this week
> 
> Regards,
> Loic
>>
>> regards
>> Suman
>>
>>>
>>> Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
>>> ---
>>> Changes from V1: typo fixes in commit message
>>>
>>>  drivers/remoteproc/remoteproc_core.c | 6 ------
>>>  1 file changed, 6 deletions(-)
>>>
>>> diff --git a/drivers/remoteproc/remoteproc_core.c
>> b/drivers/remoteproc/remoteproc_core.c
>>> index a9609d9..9a8b47c 100644
>>> --- a/drivers/remoteproc/remoteproc_core.c
>>> +++ b/drivers/remoteproc/remoteproc_core.c
>>> @@ -289,16 +289,10 @@ void rproc_free_vring(struct rproc_vring *rvring)
>>>  {
>>>  	int size = PAGE_ALIGN(vring_size(rvring->len, rvring->align));
>>>  	struct rproc *rproc = rvring->rvdev->rproc;
>>> -	int idx = rvring->rvdev->vring - rvring;
>>> -	struct fw_rsc_vdev *rsc;
>>>
>>>  	dma_free_coherent(rproc->dev.parent, size, rvring->va, rvring-
>>> dma);
>>>  	idr_remove(&rproc->notifyids, rvring->notifyid);
>>>
>>> -	/* reset resource entry info */
>>> -	rsc = (void *)rproc->table_ptr + rvring->rvdev->rsc_offset;
>>> -	rsc->vring[idx].da = 0;
>>> -	rsc->vring[idx].notifyid = -1;
>>>  }
>>>
>>>  static int rproc_vdev_do_probe(struct rproc_subdev *subdev)
>>>
> 

Re: [PATCH v2 1/1] remoteproc: correct rproc_free_vring() to avoid invalid kernel paging

[Suman Anna]

On 07/26/2018 06:51 PM, Suman Anna wrote:
> Hi Loic,
> 
> On 07/26/2018 02:48 AM, Loic PALLARDY wrote:
>> Hi Suman,
>>>
>>> Hi Loic,
>>>
>>> On 07/06/2018 02:46 AM, Loic Pallardy wrote:
>>>> If rproc_start() failed, rproc_resource_cleanup() is called to clean
>>>> debugfs entries, then associated iommu mappings, carveouts and vdev.
>>>> Issue occurs when rproc_free_vring() is trying to reset vring resource
>>>> table entry.
>>>> At this time, table_ptr is pointing on loaded resource table and carveouts
>>>> already released, so access to loaded resource table is generating a kernel
>>>> paging error:
>>>
>>> Are you using a device specific CMA pool or carveout, and if so, where
>>> the pool is? If not, where is the default CMA pool? I am trying to
>>> reproduce the issue on my platform with the start failure as you
>>> suggested, but haven't seen it so far. That said, I have seen the exact
>>> same crash when using HighMEM CMA pools on my downstream kernel
>>> when
>>> stopping the processor, and the root cause is essentially the same as
>>> what you summarized here. The issue was present with LowMem pools as
>>> well, but got masked because of the kernel linear mapping.
>>
>> I have a carveout declared in firmware resource table for co-processor code and data, and st driver has a specific 
>> reserved memory region to fit fix address space requested by co-processor.
>> So CPU access to code and loaded resource table area is granted thanks to allocation done by rproc_handle_carveout().
> 
> Where are the vrings getting allocated from?
> 
> In anycase, I prefer that we should actually reset the table_ptr in
> rproc_start() in failure cases (undo the operation essentially) as we
> don't call rproc_stop() in those cases. This will result in symmetric
> code. We already have the reset handled in rproc_stop() added recently
> in commit 0a8b81cb2e41 ("remoteproc: Reset table_ptr on stop"). Let me
> know what you think, I can send a quick patch.

FYI, patch for the same posted here,
https://patchwork.kernel.org/patch/10546555/

regards
Suman

>>
>>>
>>>>
>>>> [   12.696535] Unable to handle kernel paging request at virtual address
>>> f0f357cc
>>>> [   12.696540] pgd = (ptrval)
>>>> [   12.696542] [f0f357cc] *pgd=6d2d0811, *pte=00000000, *ppte=00000000
>>>> [   12.696558] Internal error: Oops: 807 [#1] SMP ARM
>>>> [   12.696563] Modules linked in: rpmsg_core v4l2_mem2mem
>>> videobuf2_dma_contig sti_drm v4l2_common vida
>>>> [   12.696598] CPU: 1 PID: 48 Comm: kworker/1:1 Tainted: G        W
>>> 4.18.0-rc2-00018-g3170fdd-8
>>>> [   12.696602] Hardware name: STi SoC with Flattened Device Tree
>>>> [   12.696625] Workqueue: events request_firmware_work_func
>>>> [   12.696659] PC is at rproc_free_vring+0x84/0xbc [remoteproc]
>>>> [   12.696667] LR is at rproc_free_vring+0x70/0xbc [remoteproc]
>>>>
>>>> This patch proposes to simply remove reset of resource table vring entries,
>>>> as firmware and resource table are reloaded at each rproc boot.
>>>> rproc_trigger_recovery() not impacted as resources not touched during
>>> recovery
>>>> procedure.
>>>
>>> And error recovery doesn't work for me after the rproc_start, stop got
>>> introduced.
>> Recovery no available on B2260, but I'll test it on another platform this week
>>
>> Regards,
>> Loic
>>>
>>> regards
>>> Suman
>>>
>>>>
>>>> Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
>>>> ---
>>>> Changes from V1: typo fixes in commit message
>>>>
>>>>  drivers/remoteproc/remoteproc_core.c | 6 ------
>>>>  1 file changed, 6 deletions(-)
>>>>
>>>> diff --git a/drivers/remoteproc/remoteproc_core.c
>>> b/drivers/remoteproc/remoteproc_core.c
>>>> index a9609d9..9a8b47c 100644
>>>> --- a/drivers/remoteproc/remoteproc_core.c
>>>> +++ b/drivers/remoteproc/remoteproc_core.c
>>>> @@ -289,16 +289,10 @@ void rproc_free_vring(struct rproc_vring *rvring)
>>>>  {
>>>>  	int size = PAGE_ALIGN(vring_size(rvring->len, rvring->align));
>>>>  	struct rproc *rproc = rvring->rvdev->rproc;
>>>> -	int idx = rvring->rvdev->vring - rvring;
>>>> -	struct fw_rsc_vdev *rsc;
>>>>
>>>>  	dma_free_coherent(rproc->dev.parent, size, rvring->va, rvring-
>>>> dma);
>>>>  	idr_remove(&rproc->notifyids, rvring->notifyid);
>>>>
>>>> -	/* reset resource entry info */
>>>> -	rsc = (void *)rproc->table_ptr + rvring->rvdev->rsc_offset;
>>>> -	rsc->vring[idx].da = 0;
>>>> -	rsc->vring[idx].notifyid = -1;
>>>>  }
>>>>
>>>>  static int rproc_vdev_do_probe(struct rproc_subdev *subdev)
>>>>
>>
> 

RE: [PATCH v2 1/1] remoteproc: correct rproc_free_vring() to avoid invalid kernel paging

[Loic PALLARDY]

Hi Suman, 

> -----Original Message-----
> From: Suman Anna <s-anna@ti.com>
> Sent: Friday, July 27, 2018 1:52 AM
> To: Loic PALLARDY <loic.pallardy@st.com>; bjorn.andersson@linaro.org;
> ohad@wizery.com
> Cc: linux-remoteproc@vger.kernel.org; linux-kernel@vger.kernel.org;
> Arnaud POULIQUEN <arnaud.pouliquen@st.com>;
> benjamin.gaignard@linaro.org
> Subject: Re: [PATCH v2 1/1] remoteproc: correct rproc_free_vring() to avoid
> invalid kernel paging
> 
> Hi Loic,
> 
> On 07/26/2018 02:48 AM, Loic PALLARDY wrote:
> > Hi Suman,
> >>
> >> Hi Loic,
> >>
> >> On 07/06/2018 02:46 AM, Loic Pallardy wrote:
> >>> If rproc_start() failed, rproc_resource_cleanup() is called to clean
> >>> debugfs entries, then associated iommu mappings, carveouts and vdev.
> >>> Issue occurs when rproc_free_vring() is trying to reset vring resource
> >>> table entry.
> >>> At this time, table_ptr is pointing on loaded resource table and carveouts
> >>> already released, so access to loaded resource table is generating a
> kernel
> >>> paging error:
> >>
> >> Are you using a device specific CMA pool or carveout, and if so, where
> >> the pool is? If not, where is the default CMA pool? I am trying to
> >> reproduce the issue on my platform with the start failure as you
> >> suggested, but haven't seen it so far. That said, I have seen the exact
> >> same crash when using HighMEM CMA pools on my downstream kernel
> >> when
> >> stopping the processor, and the root cause is essentially the same as
> >> what you summarized here. The issue was present with LowMem pools
> as
> >> well, but got masked because of the kernel linear mapping.
> >
> > I have a carveout declared in firmware resource table for co-processor
> code and data, and st driver has a specific
> > reserved memory region to fit fix address space requested by co-
> processor.
> > So CPU access to code and loaded resource table area is granted thanks to
> allocation done by rproc_handle_carveout().
> 
> Where are the vrings getting allocated from?

Vrings are allocated from same reserved memory region assigned to ST platform driver.
> 
> In anycase, I prefer that we should actually reset the table_ptr in
> rproc_start() in failure cases (undo the operation essentially) as we
> don't call rproc_stop() in those cases. This will result in symmetric
> code. We already have the reset handled in rproc_stop() added recently
> in commit 0a8b81cb2e41 ("remoteproc: Reset table_ptr on stop"). Let me
> know what you think, I can send a quick patch.

Agree better to have symmetric code. Should be OK. I'll tested .

Regards,
Loic
> 
> regards
> Suman
> 
> >
> >>
> >>>
> >>> [   12.696535] Unable to handle kernel paging request at virtual address
> >> f0f357cc
> >>> [   12.696540] pgd = (ptrval)
> >>> [   12.696542] [f0f357cc] *pgd=6d2d0811, *pte=00000000,
> *ppte=00000000
> >>> [   12.696558] Internal error: Oops: 807 [#1] SMP ARM
> >>> [   12.696563] Modules linked in: rpmsg_core v4l2_mem2mem
> >> videobuf2_dma_contig sti_drm v4l2_common vida
> >>> [   12.696598] CPU: 1 PID: 48 Comm: kworker/1:1 Tainted: G        W
> >> 4.18.0-rc2-00018-g3170fdd-8
> >>> [   12.696602] Hardware name: STi SoC with Flattened Device Tree
> >>> [   12.696625] Workqueue: events request_firmware_work_func
> >>> [   12.696659] PC is at rproc_free_vring+0x84/0xbc [remoteproc]
> >>> [   12.696667] LR is at rproc_free_vring+0x70/0xbc [remoteproc]
> >>>
> >>> This patch proposes to simply remove reset of resource table vring
> entries,
> >>> as firmware and resource table are reloaded at each rproc boot.
> >>> rproc_trigger_recovery() not impacted as resources not touched during
> >> recovery
> >>> procedure.
> >>
> >> And error recovery doesn't work for me after the rproc_start, stop got
> >> introduced.
> > Recovery no available on B2260, but I'll test it on another platform this
> week
> >
> > Regards,
> > Loic
> >>
> >> regards
> >> Suman
> >>
> >>>
> >>> Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
> >>> ---
> >>> Changes from V1: typo fixes in commit message
> >>>
> >>>  drivers/remoteproc/remoteproc_core.c | 6 ------
> >>>  1 file changed, 6 deletions(-)
> >>>
> >>> diff --git a/drivers/remoteproc/remoteproc_core.c
> >> b/drivers/remoteproc/remoteproc_core.c
> >>> index a9609d9..9a8b47c 100644
> >>> --- a/drivers/remoteproc/remoteproc_core.c
> >>> +++ b/drivers/remoteproc/remoteproc_core.c
> >>> @@ -289,16 +289,10 @@ void rproc_free_vring(struct rproc_vring
> *rvring)
> >>>  {
> >>>  	int size = PAGE_ALIGN(vring_size(rvring->len, rvring->align));
> >>>  	struct rproc *rproc = rvring->rvdev->rproc;
> >>> -	int idx = rvring->rvdev->vring - rvring;
> >>> -	struct fw_rsc_vdev *rsc;
> >>>
> >>>  	dma_free_coherent(rproc->dev.parent, size, rvring->va, rvring-
> >>> dma);
> >>>  	idr_remove(&rproc->notifyids, rvring->notifyid);
> >>>
> >>> -	/* reset resource entry info */
> >>> -	rsc = (void *)rproc->table_ptr + rvring->rvdev->rsc_offset;
> >>> -	rsc->vring[idx].da = 0;
> >>> -	rsc->vring[idx].notifyid = -1;
> >>>  }
> >>>
> >>>  static int rproc_vdev_do_probe(struct rproc_subdev *subdev)
> >>>
> >