* [PATCH] thermal: imx8mm: Fix build warning of incorrect argument type
@ 2020-03-23 14:19 Anson Huang
2020-03-23 14:33 ` Daniel Lezcano
0 siblings, 1 reply; 4+ messages in thread
From: Anson Huang @ 2020-03-23 14:19 UTC (permalink / raw)
To: rui.zhang, daniel.lezcano, amit.kucheria, shawnguo, s.hauer,
kernel, festevam, linux-pm, linux-arm-kernel, linux-kernel
Cc: Linux-imx
Fix below sparse warning:
drivers/thermal/imx8mm_thermal.c:82:36: sparse: sparse: incorrect type in argument 2 (different address spaces), expected unsigned long const volatile *addr
drivers/thermal/imx8mm_thermal.c:82:36: sparse: expected unsigned long const volatile *addr
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
drivers/thermal/imx8mm_thermal.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c
index c32308b..0d60f8d 100644
--- a/drivers/thermal/imx8mm_thermal.c
+++ b/drivers/thermal/imx8mm_thermal.c
@@ -75,15 +75,14 @@ static int imx8mp_tmu_get_temp(void *data, int *temp)
{
struct tmu_sensor *sensor = data;
struct imx8mm_tmu *tmu = sensor->priv;
+ unsigned long val;
bool ready;
- u32 val;
- ready = test_bit(probe_status_offset(sensor->hw_id),
- tmu->base + TRITSR);
+ val = readl_relaxed(tmu->base + TRITSR);
+ ready = test_bit(probe_status_offset(sensor->hw_id), &val);
if (!ready)
return -EAGAIN;
- val = readl_relaxed(tmu->base + TRITSR);
val = sensor->hw_id ? FIELD_GET(TRITSR_TEMP1_VAL_MASK, val) :
FIELD_GET(TRITSR_TEMP0_VAL_MASK, val);
if (val & SIGN_BIT) /* negative */
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH] thermal: imx8mm: Fix build warning of incorrect argument type
2020-03-23 14:19 [PATCH] thermal: imx8mm: Fix build warning of incorrect argument type Anson Huang
@ 2020-03-23 14:33 ` Daniel Lezcano
2020-03-23 14:53 ` Anson Huang
0 siblings, 1 reply; 4+ messages in thread
From: Daniel Lezcano @ 2020-03-23 14:33 UTC (permalink / raw)
To: Anson Huang, rui.zhang, amit.kucheria, shawnguo, s.hauer, kernel,
festevam, linux-pm, linux-arm-kernel, linux-kernel
Cc: Linux-imx
On 23/03/2020 15:19, Anson Huang wrote:
> Fix below sparse warning:
>
> drivers/thermal/imx8mm_thermal.c:82:36: sparse: sparse: incorrect type in argument 2 (different address spaces), expected unsigned long const volatile *addr
> drivers/thermal/imx8mm_thermal.c:82:36: sparse: expected unsigned long const volatile *addr
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> drivers/thermal/imx8mm_thermal.c | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c
> index c32308b..0d60f8d 100644
> --- a/drivers/thermal/imx8mm_thermal.c
> +++ b/drivers/thermal/imx8mm_thermal.c
> @@ -75,15 +75,14 @@ static int imx8mp_tmu_get_temp(void *data, int *temp)
> {
> struct tmu_sensor *sensor = data;
> struct imx8mm_tmu *tmu = sensor->priv;
> + unsigned long val;
> bool ready;
> - u32 val;
>
> - ready = test_bit(probe_status_offset(sensor->hw_id),
> - tmu->base + TRITSR);
> + val = readl_relaxed(tmu->base + TRITSR);
> + ready = test_bit(probe_status_offset(sensor->hw_id), &val);
> if (!ready)
> return -EAGAIN;
Doesn't this patch also fix a bug because the read was done after
testing the bit? :)
> - val = readl_relaxed(tmu->base + TRITSR);
> val = sensor->hw_id ? FIELD_GET(TRITSR_TEMP1_VAL_MASK, val) :
> FIELD_GET(TRITSR_TEMP0_VAL_MASK, val);
> if (val & SIGN_BIT) /* negative */
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
^ permalink raw reply [flat|nested] 4+ messages in thread* RE: [PATCH] thermal: imx8mm: Fix build warning of incorrect argument type
2020-03-23 14:33 ` Daniel Lezcano
@ 2020-03-23 14:53 ` Anson Huang
2020-03-23 16:14 ` Daniel Lezcano
0 siblings, 1 reply; 4+ messages in thread
From: Anson Huang @ 2020-03-23 14:53 UTC (permalink / raw)
To: Daniel Lezcano, rui.zhang, amit.kucheria, shawnguo, s.hauer,
kernel, festevam, linux-pm, linux-arm-kernel, linux-kernel
Cc: dl-linux-imx
Hi, Daniel
> Subject: Re: [PATCH] thermal: imx8mm: Fix build warning of incorrect
> argument type
>
> On 23/03/2020 15:19, Anson Huang wrote:
> > Fix below sparse warning:
> >
> > drivers/thermal/imx8mm_thermal.c:82:36: sparse: sparse: incorrect type
> > in argument 2 (different address spaces), expected unsigned long const
> > volatile *addr
> > drivers/thermal/imx8mm_thermal.c:82:36: sparse: expected unsigned long
> > const volatile *addr
> >
> > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> > ---
> > drivers/thermal/imx8mm_thermal.c | 7 +++----
> > 1 file changed, 3 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/thermal/imx8mm_thermal.c
> > b/drivers/thermal/imx8mm_thermal.c
> > index c32308b..0d60f8d 100644
> > --- a/drivers/thermal/imx8mm_thermal.c
> > +++ b/drivers/thermal/imx8mm_thermal.c
> > @@ -75,15 +75,14 @@ static int imx8mp_tmu_get_temp(void *data, int
> > *temp) {
> > struct tmu_sensor *sensor = data;
> > struct imx8mm_tmu *tmu = sensor->priv;
> > + unsigned long val;
> > bool ready;
> > - u32 val;
> >
> > - ready = test_bit(probe_status_offset(sensor->hw_id),
> > - tmu->base + TRITSR);
> > + val = readl_relaxed(tmu->base + TRITSR);
> > + ready = test_bit(probe_status_offset(sensor->hw_id), &val);
> > if (!ready)
> > return -EAGAIN;
>
> Doesn't this patch also fix a bug because the read was done after testing the
> bit? :)
Yes😊 Previous patch reads the register twice at different time, may cause a
sync issue of checking the ready bit and reading the temperature using register
values read at different time.
Do I need to improve the commit log? I guess no need?
Thanks,
Anson
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] thermal: imx8mm: Fix build warning of incorrect argument type
2020-03-23 14:53 ` Anson Huang
@ 2020-03-23 16:14 ` Daniel Lezcano
0 siblings, 0 replies; 4+ messages in thread
From: Daniel Lezcano @ 2020-03-23 16:14 UTC (permalink / raw)
To: Anson Huang, rui.zhang, amit.kucheria, shawnguo, s.hauer, kernel,
festevam, linux-pm, linux-arm-kernel, linux-kernel
Cc: dl-linux-imx
On 23/03/2020 15:53, Anson Huang wrote:
> Hi, Daniel
>
>> Subject: Re: [PATCH] thermal: imx8mm: Fix build warning of incorrect
>> argument type
>>
>> On 23/03/2020 15:19, Anson Huang wrote:
>>> Fix below sparse warning:
>>>
>>> drivers/thermal/imx8mm_thermal.c:82:36: sparse: sparse: incorrect type
>>> in argument 2 (different address spaces), expected unsigned long const
>>> volatile *addr
>>> drivers/thermal/imx8mm_thermal.c:82:36: sparse: expected unsigned long
>>> const volatile *addr
>>>
>>> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
>>> ---
>>> drivers/thermal/imx8mm_thermal.c | 7 +++----
>>> 1 file changed, 3 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/drivers/thermal/imx8mm_thermal.c
>>> b/drivers/thermal/imx8mm_thermal.c
>>> index c32308b..0d60f8d 100644
>>> --- a/drivers/thermal/imx8mm_thermal.c
>>> +++ b/drivers/thermal/imx8mm_thermal.c
>>> @@ -75,15 +75,14 @@ static int imx8mp_tmu_get_temp(void *data, int
>>> *temp) {
>>> struct tmu_sensor *sensor = data;
>>> struct imx8mm_tmu *tmu = sensor->priv;
>>> + unsigned long val;
>>> bool ready;
>>> - u32 val;
>>>
>>> - ready = test_bit(probe_status_offset(sensor->hw_id),
>>> - tmu->base + TRITSR);
>>> + val = readl_relaxed(tmu->base + TRITSR);
>>> + ready = test_bit(probe_status_offset(sensor->hw_id), &val);
>>> if (!ready)
>>> return -EAGAIN;
>>
>> Doesn't this patch also fix a bug because the read was done after testing the
>> bit? :)
>
> Yes😊 Previous patch reads the register twice at different time, may cause a
> sync issue of checking the ready bit and reading the temperature using register
> values read at different time.
>
> Do I need to improve the commit log? I guess no need?
No need, it is fine.
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-03-23 16:14 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-23 14:19 [PATCH] thermal: imx8mm: Fix build warning of incorrect argument type Anson Huang
2020-03-23 14:33 ` Daniel Lezcano
2020-03-23 14:53 ` Anson Huang
2020-03-23 16:14 ` Daniel Lezcano
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).