linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 0/4]  Add support for MAX96714F and MAX96717F GMSL2 ser/des
@ 2024-03-05 15:26 Julien Massot
  2024-03-05 15:26 ` [PATCH v4 1/4] dt-bindings: media: add Maxim MAX96717 GMSL2 Serializer Julien Massot
                   ` (3 more replies)
  0 siblings, 4 replies; 11+ messages in thread
From: Julien Massot @ 2024-03-05 15:26 UTC (permalink / raw)
  To: linux-media
  Cc: kernel, devicetree, linux-kernel, mchehab, robh+dt,
	krzysztof.kozlowski+dt, conor+dt, sakari.ailus, Julien Massot

Change since v3:
- bindings
  - Renamed bindings to drop the 'f' suffix
  - Add bus type to MAX96717 and remove from MAX9674
  - Add lane-polarities to both bindings

- drivers
  - Address changes requested by Sakari in v3
  - use v4l2_subdev_s_stream_helper for MAX96714
  - do not init regmap twice in the MAX96714 driver
  - Fix compilations on 32 bits platforms

Each patch contains an exhaustive changelog compared to v3.

Krzysztof, I dropped your 'Reviewed-by' since there are some changes
in the binding patches.

Change since v2:
- Convert drivers to use CCI helpers
- Use generic node name
- Use 'powerdown' as gpio name instead of 'enable'
- Add pattern generator support for MAX96714

These patches add support for Maxim MAX96714F deserializer and
MAX96717F serializer.

MAX96714F has one GMSL2 input port and one CSI2 4 lanes output port,
MAX96717F has one CSI2 input port and one GMSL2 output port.

The drivers support the tunnel mode where all the
CSI2 traffic coming from an imager is replicated through the deserializer
output port.

Both MAX96714F and MAX96717F are limited to a 3Gbps forward link rate
leaving a maximum of 2.6Gbps for the video payload.


Julien Massot (4):
  dt-bindings: media: add Maxim MAX96717 GMSL2 Serializer
  dt-bindings: media: add Maxim MAX96714 GMSL2 Deserializer
  media: i2c: add MAX96717 driver
  media: i2c: add MAX96714 driver

 .../bindings/media/i2c/maxim,max96714.yaml    |  169 +++
 .../bindings/media/i2c/maxim,max96717.yaml    |  158 +++
 MAINTAINERS                                   |   14 +
 drivers/media/i2c/Kconfig                     |   28 +
 drivers/media/i2c/Makefile                    |    2 +
 drivers/media/i2c/max96714.c                  | 1028 +++++++++++++++++
 drivers/media/i2c/max96717.c                  |  947 +++++++++++++++
 7 files changed, 2346 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max96714.yaml
 create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
 create mode 100644 drivers/media/i2c/max96714.c
 create mode 100644 drivers/media/i2c/max96717.c

-- 
2.44.0


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v4 1/4] dt-bindings: media: add Maxim MAX96717 GMSL2 Serializer
  2024-03-05 15:26 [PATCH v4 0/4] Add support for MAX96714F and MAX96717F GMSL2 ser/des Julien Massot
@ 2024-03-05 15:26 ` Julien Massot
  2024-03-07 19:22   ` Conor Dooley
  2024-03-05 15:26 ` [PATCH v4 2/4] dt-bindings: media: add Maxim MAX96714 GMSL2 Deserializer Julien Massot
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 11+ messages in thread
From: Julien Massot @ 2024-03-05 15:26 UTC (permalink / raw)
  To: linux-media
  Cc: kernel, devicetree, linux-kernel, mchehab, robh+dt,
	krzysztof.kozlowski+dt, conor+dt, sakari.ailus, Julien Massot

Add DT bindings for Maxim MAX96717 GMSL2 Serializer.

Signed-off-by: Julien Massot <julien.massot@collabora.com>
---
Change since v3:
 - Renamed file to maxim,max96717.yaml dropped the 'f' suffix
 - Added lane-polarities and bus type properties to the CSI endpoint

Change since v2:
 - remove reg description
 - add data lanes min/maxItems
 - Use generic node name 
---
 .../bindings/media/i2c/maxim,max96717.yaml    | 158 ++++++++++++++++++
 1 file changed, 158 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
new file mode 100644
index 000000000000..83f4f1068709
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2024 Collabora Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/maxim,max96717.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX96717 CSI-2 to GMSL2 Serializer
+
+maintainers:
+  - Julien Massot <julien.massot@collabora.com>
+
+description: |
+  The MAX96717F serializer converts MIPI CSI-2 D-PHY or C-PHY formatted input
+  into GMSL2 serial outputs. The device allows the GMSL2 link to
+  simultaneously transmit bidirectional control-channel data while forward
+  video transmissions are in progress. The MAX96717F can connect to one
+  remotely located deserializer using industry-standard coax or STP
+  interconnects. The device cans operate in pixel or tunnel mode. In pixel mode
+  the MAX96717F can select the MIPI datatype, while the tunnel mode forward all the MIPI
+  data received by the serializer.
+  The MAX96717F supports Reference Over Reverse (channel),
+  to generate a clock output for the sensor from the GMSL reverse channel.
+
+  The GMSL2 serial link operates at a fixed rate of 3Gbps in the
+  forward direction and 187.5Mbps in the reverse direction.
+
+properties:
+  compatible:
+    const: maxim,max96717f
+
+  '#gpio-cells':
+    const: 2
+    description:
+      First cell is the GPIO pin number, second cell is the flags. The GPIO pin
+      number must be in range of [0, 10].
+
+  gpio-controller: true
+
+  '#clock-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 Input port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              lane-polarities:
+                minItems: 1
+                maxItems: 5
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - data-lanes
+              - bus-type
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        unevaluatedProperties: false
+        description: GMSL Output port
+
+    required:
+      - port@1
+
+  i2c-gate:
+    $ref: /schemas/i2c/i2c-controller.yaml
+    unevaluatedProperties: false
+    description:
+      The MAX96717F will forward the I2C requests from the
+      incoming GMSL2 link. Therefore, it supports an i2c-gate
+      subnode to configure a sensor.
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        serializer: serializer@40 {
+            compatible = "maxim,max96717f";
+            reg = <0x40>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            #clock-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    max96717f_csi_in: endpoint {
+                        bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&sensor_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    max96917f_gmsl_out: endpoint {
+                        remote-endpoint = <&deser_gmsl_in>;
+                    };
+                };
+            };
+
+            i2c-gate {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                sensor@10 {
+                    compatible = "st,st-vgxy61";
+                    reg = <0x10>;
+                    reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>;
+                    clocks = <&serializer>;
+                    VCORE-supply = <&v1v2>;
+                    VDDIO-supply = <&v1v8>;
+                    VANA-supply = <&v2v8>;
+                    port {
+                        sensor_out: endpoint {
+                            data-lanes = <1 2 3 4>;
+                            remote-endpoint = <&max96717f_csi_in>;
+                        };
+                    };
+                };
+            };
+        };
+    };
+...
-- 
2.44.0


^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [PATCH v4 2/4] dt-bindings: media: add Maxim MAX96714 GMSL2 Deserializer
  2024-03-05 15:26 [PATCH v4 0/4] Add support for MAX96714F and MAX96717F GMSL2 ser/des Julien Massot
  2024-03-05 15:26 ` [PATCH v4 1/4] dt-bindings: media: add Maxim MAX96717 GMSL2 Serializer Julien Massot
@ 2024-03-05 15:26 ` Julien Massot
  2024-03-07 19:21   ` Conor Dooley
  2024-03-05 15:26 ` [PATCH v4 3/4] media: i2c: add MAX96717 driver Julien Massot
  2024-03-05 15:26 ` [PATCH v4 4/4] media: i2c: add MAX96714 driver Julien Massot
  3 siblings, 1 reply; 11+ messages in thread
From: Julien Massot @ 2024-03-05 15:26 UTC (permalink / raw)
  To: linux-media
  Cc: kernel, devicetree, linux-kernel, mchehab, robh+dt,
	krzysztof.kozlowski+dt, conor+dt, sakari.ailus, Julien Massot

Add DT bindings for Maxim MAX96714 GMSL2 Deserializer.

Signed-off-by: Julien Massot <julien.massot@collabora.com>
---
Change since v3:
 - Renamed file to maxim,max96714.yaml dropped the 'f' suffix
 - Removed mention to C-PHY since it's not supported by MAX96714 deserializers
 - Removed bus-type requirement on CSI endpoint since the device only support D-PHY
 - Removed the clock-lanes property in the dt example

Change since v2:
 - remove reg description
 - rename enable gpio to powerdown
 - use generic node name: i2c, serializer, deserializer
---
---
 .../bindings/media/i2c/maxim,max96714.yaml    | 169 ++++++++++++++++++
 1 file changed, 169 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max96714.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96714.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96714.yaml
new file mode 100644
index 000000000000..d76a5213ef0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96714.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2024 Collabora Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/maxim,max96714.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX96714 GMSL2 to CSI-2 Deserializer
+
+maintainers:
+  - Julien Massot <julien.massot@collabora.com>
+
+description: |
+  The MAX96714F deserializer converts GMSL2 serial inputs into MIPI
+  CSI-2 D-PHY formatted output. The device allows the GMSL2 link to
+  simultaneously transmit bidirectional control-channel data while forward
+  video transmissions are in progress. The MAX96714F can connect to one
+  remotely located serializer using industry-standard coax or STP
+  interconnects. The device cans operate in pixel or tunnel mode. In pixel mode
+  the MAX96714F can select individual video stream, while the tunnel mode forward all
+  the MIPI data received by the serializer.
+
+  The GMSL2 serial link operates at a fixed rate of 3Gbps in the
+  forward direction and 187.5Mbps in the reverse direction.
+
+properties:
+  compatible:
+    const: maxim,max96714f
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    maxItems: 1
+    description:
+      Specifier for the GPIO connected to the PWDNB pin.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        unevaluatedProperties: false
+        description: GMSL Input
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            description:
+              Endpoint for GMSL2-Link port.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 Output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              lane-polarities:
+                minItems: 1
+                maxItems: 5
+
+              link-frequencies:
+                maxItems: 1
+
+            required:
+              - data-lanes
+
+    required:
+      - port@1
+
+  i2c-gate:
+    $ref: /schemas/i2c/i2c-controller.yaml
+    unevaluatedProperties: false
+    description: |
+      The MAX96714 will pass through and forward the I2C requests from the
+      incoming I2C bus over the GMSL2 link. Therefore it supports an i2c-gate
+      subnode to configure a serializer.
+
+  port0-poc-supply:
+    description: Regulator providing Power over Coax for the GMSL port
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        deserializer@28 {
+            compatible = "maxim,max96714f";
+            reg = <0x28>;
+            powerdown-gpios = <&main_gpio0 37 GPIO_ACTIVE_LOW>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    max96714_gmsl_in: endpoint {
+                        remote-endpoint = <&max96917f_gmsl_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    max96714_csi_out: endpoint {
+                        data-lanes = <1 2 3 4>;
+                        link-frequencies = /bits/ 64 <400000000>;
+                        remote-endpoint = <&csi_in>;
+                    };
+                };
+            };
+
+            i2c-gate {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                serializer@40 {
+                    compatible = "maxim,max96717f";
+                    reg = <0x40>;
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    #clock-cells = <0>;
+
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                            reg = <0>;
+                            max96717f_csi_in: endpoint {
+                                bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+                                data-lanes = <1 2>;
+                                lane-polarities = <1 0 1>;
+                                remote-endpoint = <&sensor_out>;
+                            };
+                        };
+
+                        port@1 {
+                            reg = <1>;
+                            max96917f_gmsl_out: endpoint {
+                                remote-endpoint = <&max96714_gmsl_in>;
+                            };
+                        };
+                    };
+                };
+            };
+        };
+    };
+...
-- 
2.44.0


^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [PATCH v4 3/4] media: i2c: add MAX96717 driver
  2024-03-05 15:26 [PATCH v4 0/4] Add support for MAX96714F and MAX96717F GMSL2 ser/des Julien Massot
  2024-03-05 15:26 ` [PATCH v4 1/4] dt-bindings: media: add Maxim MAX96717 GMSL2 Serializer Julien Massot
  2024-03-05 15:26 ` [PATCH v4 2/4] dt-bindings: media: add Maxim MAX96714 GMSL2 Deserializer Julien Massot
@ 2024-03-05 15:26 ` Julien Massot
  2024-03-05 15:26 ` [PATCH v4 4/4] media: i2c: add MAX96714 driver Julien Massot
  3 siblings, 0 replies; 11+ messages in thread
From: Julien Massot @ 2024-03-05 15:26 UTC (permalink / raw)
  To: linux-media
  Cc: kernel, devicetree, linux-kernel, mchehab, robh+dt,
	krzysztof.kozlowski+dt, conor+dt, sakari.ailus, Julien Massot

This driver handle the MAX96717 serializer in tunnel mode.
All incoming CSI traffic will be tunneled through the GMSL2
link.

Signed-off-by: Julien Massot <julien.massot@collabora.com>
---
Change since v3:
 - Maintainers: align to the new binding path
 - Kconfig: better describe the symbol
 - store the v4l2_mbus_config_mipi_csi2 structure instead of the full endpoint in the driver private structure
 - use MAX96717_PAD_SINK/SOURCE instead of 0/1 for pad intialization
 - Removed incorrect call to fwnode_handle_put(priv->sd.fwnode)
 - Use unsigned int instead of u8
 - Allocate clk name out of the clk struct initialization
 - fixed multiline comment
 - Removed one unnecessary goto at the end of the probe function

Change since v2:
 - Use CCI helpers instead of recoding register access
 - add missing bitfield header
---
 MAINTAINERS                  |   7 +
 drivers/media/i2c/Kconfig    |  14 +
 drivers/media/i2c/Makefile   |   1 +
 drivers/media/i2c/max96717.c | 947 +++++++++++++++++++++++++++++++++++
 4 files changed, 969 insertions(+)
 create mode 100644 drivers/media/i2c/max96717.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 83b7d3745336..c97445b2483b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13181,6 +13181,13 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
 F:	drivers/staging/media/max96712/max96712.c
 
+MAX96717 GMSL2 SERIALIZER DRIVER
+M:	Julien Massot <julien.massot@collabora.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
+F:	drivers/media/i2c/max96717.c
+
 MAX9860 MONO AUDIO VOICE CODEC DRIVER
 M:	Peter Rosin <peda@axentia.se>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 56f276b920ab..1a99396edbcf 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -1573,6 +1573,20 @@ config VIDEO_DS90UB960
 	  Device driver for the Texas Instruments DS90UB960
 	  FPD-Link III Deserializer and DS90UB9702 FPD-Link IV Deserializer.
 
+config VIDEO_MAX96717
+	tristate "Maxim MAX96717 GMSL2 Serializer support"
+	depends on OF && I2C && VIDEO_DEV && COMMON_CLK
+	select I2C_MUX
+	select GPIOLIB
+	select V4L2_CCI_I2C
+	help
+	  Device driver for the Maxim MAX96717 GMSL2 Serializer.
+	  MAX96717 serializers convert video on a MIPI CSI-2
+	  input to a GMSL2 output.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called max96717.
+
 endmenu
 
 endif # VIDEO_DEV
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index dfbe6448b549..9e007116f929 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -64,6 +64,7 @@ obj-$(CONFIG_VIDEO_LM3646) += lm3646.o
 obj-$(CONFIG_VIDEO_M52790) += m52790.o
 obj-$(CONFIG_VIDEO_MAX9271_LIB) += max9271.o
 obj-$(CONFIG_VIDEO_MAX9286) += max9286.o
+obj-$(CONFIG_VIDEO_MAX96717) += max96717.o
 obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o
 obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o
 obj-$(CONFIG_VIDEO_MT9M001) += mt9m001.o
diff --git a/drivers/media/i2c/max96717.c b/drivers/media/i2c/max96717.c
new file mode 100644
index 000000000000..9c0bae7defc2
--- /dev/null
+++ b/drivers/media/i2c/max96717.c
@@ -0,0 +1,947 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Maxim GMSL2 Serializer Driver
+ *
+ * Copyright (C) 2024 Collabora Ltd.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/fwnode.h>
+#include <linux/gpio/driver.h>
+#include <linux/i2c-mux.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+#include <media/v4l2-cci.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-subdev.h>
+
+#define MAX96717F_DEVICE_ID 0xc8
+#define MAX96717_PORTS      2
+#define MAX96717_PAD_SINK   0
+#define MAX96717_PAD_SOURCE 1
+
+#define MAX96717_DEFAULT_CLKOUT_RATE	24000000UL
+
+/* DEV */
+#define REG3             CCI_REG8(0x3)
+#define MAX96717_RCLKSEL GENMASK(1, 0)
+#define RCLKSEL_REF_PLL  CCI_REG8(0x3)
+#define MAX96717_REG6    CCI_REG8(0x6)
+#define RCLKEN           BIT(5)
+#define MAX96717_DEV_ID  CCI_REG8(0xd)
+#define MAX96717_DEV_REV CCI_REG8(0xe)
+#define MAX96717_DEV_REV_MASK GENMASK(3, 0)
+
+/* VID_TX Z */
+#define MAX96717_VIDEO_TX2 CCI_REG8(0x112)
+#define MAX96717_VIDEO_PCLKDET BIT(7)
+
+/* GPIO */
+#define MAX96717_NUM_GPIO         11
+#define MAX96717_GPIO_REG_A(gpio) CCI_REG8(0x2be + (gpio) * 3)
+#define MAX96717_GPIO_OUT         BIT(4)
+#define MAX96717_GPIO_IN          BIT(3)
+#define MAX96717_GPIO_RX_EN       BIT(2)
+#define MAX96717_GPIO_TX_EN       BIT(1)
+#define MAX96717_GPIO_OUT_DIS     BIT(0)
+
+/* FRONTTOP */
+/* MAX96717 only have CSI port 'B' */
+#define MAX96717_FRONTOP0     CCI_REG8(0x308)
+#define MAX96717_START_PORT_B BIT(5)
+
+/* MIPI_RX */
+#define MAX96717_MIPI_RX1       CCI_REG8(0x331)
+#define MAX96717_MIPI_LANES_CNT GENMASK(5, 4)
+#define MAX96717_MIPI_RX2       CCI_REG8(0x332) /* phy1 Lanes map */
+#define MAX96717_PHY2_LANES_MAP GENMASK(7, 4)
+#define MAX96717_MIPI_RX3       CCI_REG8(0x333) /* phy2 Lanes map */
+#define MAX96717_PHY1_LANES_MAP GENMASK(3, 0)
+#define MAX96717_MIPI_RX4       CCI_REG8(0x334) /* phy1 lane polarities */
+#define MAX96717_PHY1_LANES_POL GENMASK(6, 4)
+#define MAX96717_MIPI_RX5       CCI_REG8(0x335) /* phy2 lane polarities */
+#define MAX96717_PHY2_LANES_POL GENMASK(2, 0)
+
+/* MIPI_RX_EXT */
+#define MAX96717_MIPI_RX_EXT11 CCI_REG8(0x383)
+#define MAX96717_TUN_MODE      BIT(7)
+
+/* REF_VTG */
+#define REF_VTG0                CCI_REG8(0x3f0)
+#define REFGEN_PREDEF_EN        BIT(6)
+#define REFGEN_PREDEF_FREQ_MASK GENMASK(5, 4)
+#define REFGEN_PREDEF_FREQ_ALT  BIT(3)
+#define REFGEN_RST              BIT(1)
+#define REFGEN_EN               BIT(0)
+
+/* MISC */
+#define PIO_SLEW_1 CCI_REG8(0x570)
+
+struct max96717_hw_data {
+	const char *model;
+	u8 device_id;
+};
+
+static const struct max96717_hw_data max96717f_data = {
+	.model = "max96717f",
+	.device_id = MAX96717F_DEVICE_ID,
+};
+
+struct max96717_priv {
+	const struct max96717_hw_data	  *data;
+	struct i2c_client		  *client;
+	struct regmap			  *regmap;
+	struct i2c_mux_core		  *mux;
+	struct v4l2_mbus_config_mipi_csi2 mipi_csi2;
+	struct v4l2_subdev                sd;
+	struct media_pad                  pads[MAX96717_PORTS];
+	struct v4l2_async_notifier        notifier;
+	struct v4l2_subdev                *source_sd;
+	u16                               source_sd_pad;
+	u64			          enabled_source_streams;
+	u8                                pll_predef_index;
+	struct clk_hw                     clk_hw;
+	struct gpio_chip                  gpio_chip;
+};
+
+static inline struct max96717_priv *sd_to_max96717(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct max96717_priv, sd);
+}
+
+static inline struct max96717_priv *clk_hw_to_max96717(struct clk_hw *hw)
+{
+	return container_of(hw, struct max96717_priv, clk_hw);
+}
+
+static int max96717_i2c_mux_select(struct i2c_mux_core *mux, u32 chan)
+{
+	return 0;
+}
+
+static int max96717_i2c_mux_init(struct max96717_priv *priv)
+{
+	priv->mux = i2c_mux_alloc(priv->client->adapter, &priv->client->dev,
+				  1, 0, I2C_MUX_LOCKED | I2C_MUX_GATE,
+				  max96717_i2c_mux_select, NULL);
+	if (!priv->mux)
+		return -ENOMEM;
+
+	return i2c_mux_add_adapter(priv->mux, 0, 0, 0);
+}
+
+static inline int max96717_start_csi(struct max96717_priv *priv, bool start)
+{
+	return cci_update_bits(priv->regmap, MAX96717_FRONTOP0,
+			       MAX96717_START_PORT_B,
+			       start ? MAX96717_START_PORT_B : 0, NULL);
+}
+
+static int max96717_gpiochip_get(struct gpio_chip *gpiochip,
+				 unsigned int offset)
+{
+	struct max96717_priv *priv = gpiochip_get_data(gpiochip);
+	u64 val;
+	int ret;
+
+	ret = cci_read(priv->regmap, MAX96717_GPIO_REG_A(offset),
+		       &val, NULL);
+	if (ret)
+		return ret;
+
+	if (val & MAX96717_GPIO_OUT_DIS)
+		return !!(val & MAX96717_GPIO_IN);
+	else
+		return !!(val & MAX96717_GPIO_OUT);
+}
+
+static void max96717_gpiochip_set(struct gpio_chip *gpiochip,
+				  unsigned int offset, int value)
+{
+	struct max96717_priv *priv = gpiochip_get_data(gpiochip);
+
+	cci_update_bits(priv->regmap, MAX96717_GPIO_REG_A(offset),
+			MAX96717_GPIO_OUT, MAX96717_GPIO_OUT, NULL);
+}
+
+static int max96717_gpio_get_direction(struct gpio_chip *gpiochip,
+				       unsigned int offset)
+{
+	struct max96717_priv *priv = gpiochip_get_data(gpiochip);
+	u64 val;
+	int ret;
+
+	ret = cci_read(priv->regmap, MAX96717_GPIO_REG_A(offset), &val, NULL);
+	if (ret < 0)
+		return ret;
+
+	return !!(val & MAX96717_GPIO_OUT_DIS);
+}
+
+static int max96717_gpio_direction_out(struct gpio_chip *gpiochip,
+				       unsigned int offset, int value)
+{
+	struct max96717_priv *priv = gpiochip_get_data(gpiochip);
+
+	return cci_update_bits(priv->regmap, MAX96717_GPIO_REG_A(offset),
+			       MAX96717_GPIO_OUT_DIS | MAX96717_GPIO_OUT,
+			       value ? MAX96717_GPIO_OUT : 0, NULL);
+}
+
+static int max96717_gpio_direction_in(struct gpio_chip *gpiochip,
+				      unsigned int offset)
+{
+	struct max96717_priv *priv = gpiochip_get_data(gpiochip);
+
+	return cci_update_bits(priv->regmap, MAX96717_GPIO_REG_A(offset),
+			       MAX96717_GPIO_OUT_DIS, MAX96717_GPIO_OUT_DIS,
+			       NULL);
+}
+
+static int max96717_gpiochip_probe(struct max96717_priv *priv)
+{
+	struct device *dev = &priv->client->dev;
+	struct gpio_chip *gc = &priv->gpio_chip;
+	int ret, i;
+
+	gc->label = dev_name(dev);
+	gc->parent = dev;
+	gc->owner = THIS_MODULE;
+	gc->ngpio = MAX96717_NUM_GPIO;
+	gc->base = -1;
+	gc->can_sleep = true;
+	gc->get_direction = max96717_gpio_get_direction;
+	gc->direction_input = max96717_gpio_direction_in;
+	gc->direction_output = max96717_gpio_direction_out;
+	gc->set = max96717_gpiochip_set;
+	gc->get = max96717_gpiochip_get;
+	gc->of_gpio_n_cells = 2;
+
+	/* Disable GPIO forwarding */
+	for (i = 0; i < gc->ngpio; i++)
+		cci_update_bits(priv->regmap, MAX96717_GPIO_REG_A(i),
+				MAX96717_GPIO_RX_EN | MAX96717_GPIO_TX_EN,
+				0, &ret);
+
+	if (ret)
+		return ret;
+
+	ret = devm_gpiochip_add_data(dev, gc, priv);
+	if (ret) {
+		dev_err(dev, "Unable to create gpio_chip\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int _max96717_set_routing(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_state *state,
+				 struct v4l2_subdev_krouting *routing)
+{
+	static const struct v4l2_mbus_framefmt format = {
+		.width = 1280,
+		.height = 1080,
+		.code = MEDIA_BUS_FMT_Y8_1X8,
+		.field = V4L2_FIELD_NONE,
+	};
+	int ret;
+
+	ret = v4l2_subdev_routing_validate(sd, routing,
+					   V4L2_SUBDEV_ROUTING_ONLY_1_TO_1);
+	if (ret)
+		return ret;
+
+	ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing, &format);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int max96717_set_routing(struct v4l2_subdev *sd,
+				struct v4l2_subdev_state *state,
+				enum v4l2_subdev_format_whence which,
+				struct v4l2_subdev_krouting *routing)
+{
+	struct max96717_priv *priv = sd_to_max96717(sd);
+
+	if (which == V4L2_SUBDEV_FORMAT_ACTIVE && priv->enabled_source_streams)
+		return -EBUSY;
+
+	return _max96717_set_routing(sd, state, routing);
+}
+
+static int max96717_set_fmt(struct v4l2_subdev *sd,
+			    struct v4l2_subdev_state *state,
+			    struct v4l2_subdev_format *format)
+{
+	struct max96717_priv *priv = sd_to_max96717(sd);
+	struct v4l2_mbus_framefmt *fmt;
+	u64 stream_source_mask;
+
+	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE &&
+	    priv->enabled_source_streams)
+		return -EBUSY;
+
+	/* No transcoding, source and sink formats must match. */
+	if (format->pad == MAX96717_PAD_SOURCE)
+		return v4l2_subdev_get_fmt(sd, state, format);
+
+	/* Set sink format */
+	fmt = v4l2_subdev_state_get_format(state, format->pad, format->stream);
+	if (!fmt)
+		return -EINVAL;
+
+	*fmt = format->format;
+
+	/* Propagate to source format */
+	fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad,
+							   format->stream);
+	if (!fmt)
+		return -EINVAL;
+	*fmt = format->format;
+
+	stream_source_mask = BIT(format->stream);
+
+	return v4l2_subdev_state_xlate_streams(state, MAX96717_PAD_SOURCE,
+					       MAX96717_PAD_SINK,
+					       &stream_source_mask);
+}
+
+static int max96717_init_state(struct v4l2_subdev *sd,
+			       struct v4l2_subdev_state *state)
+{
+	struct v4l2_subdev_route routes[] = {
+		{
+			.sink_pad = MAX96717_PAD_SINK,
+			.sink_stream = 0,
+			.source_pad = MAX96717_PAD_SOURCE,
+			.source_stream = 0,
+			.flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE,
+		},
+	};
+	struct v4l2_subdev_krouting routing = {
+		.num_routes = ARRAY_SIZE(routes),
+		.routes = routes,
+	};
+
+	return _max96717_set_routing(sd, state, &routing);
+}
+
+static bool max96717_pipe_pclkdet(struct max96717_priv *priv)
+{
+	u64 val = 0;
+
+	cci_read(priv->regmap, MAX96717_VIDEO_TX2, &val, NULL);
+
+	return val & MAX96717_VIDEO_PCLKDET;
+}
+
+static int max96717_log_status(struct v4l2_subdev *sd)
+{
+	struct max96717_priv *priv = sd_to_max96717(sd);
+	struct device *dev = &priv->client->dev;
+
+	dev_info(dev, "Serializer: %s\n", priv->data->model);
+	dev_info(dev, "Pipe: pclkdet:%d\n", max96717_pipe_pclkdet(priv));
+
+	return 0;
+}
+
+static int max96717_enable_streams(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_state *state, u32 pad,
+				   u64 streams_mask)
+{
+	struct max96717_priv *priv = sd_to_max96717(sd);
+	struct device *dev = &priv->client->dev;
+	u64 sink_streams;
+	int ret;
+
+	sink_streams = v4l2_subdev_state_xlate_streams(state,
+						       MAX96717_PAD_SOURCE,
+						       MAX96717_PAD_SINK,
+						       &streams_mask);
+
+	if (!priv->enabled_source_streams)
+		max96717_start_csi(priv, true);
+
+	ret = v4l2_subdev_enable_streams(priv->source_sd, priv->source_sd_pad,
+					 sink_streams);
+	if (ret) {
+		dev_err(dev, "Fail to start streams:%llu on remote subdev\n",
+			sink_streams);
+		goto stop_csi;
+	}
+
+	priv->enabled_source_streams |= streams_mask;
+
+	return 0;
+
+stop_csi:
+	if (!priv->enabled_source_streams)
+		max96717_start_csi(priv, false);
+	return ret;
+}
+
+static int max96717_disable_streams(struct v4l2_subdev *sd,
+				    struct v4l2_subdev_state *state, u32 pad,
+				    u64 streams_mask)
+{
+	struct max96717_priv *priv = sd_to_max96717(sd);
+	u64 sink_streams;
+	int ret;
+
+	sink_streams = v4l2_subdev_state_xlate_streams(state,
+						       MAX96717_PAD_SOURCE,
+						       MAX96717_PAD_SINK,
+						       &streams_mask);
+
+	ret = v4l2_subdev_disable_streams(priv->source_sd, priv->source_sd_pad,
+					  sink_streams);
+	if (ret)
+		return ret;
+
+	priv->enabled_source_streams &= ~streams_mask;
+
+	if (!priv->enabled_source_streams)
+		max96717_start_csi(priv, false);
+
+	return 0;
+}
+
+static const struct v4l2_subdev_pad_ops max96717_pad_ops = {
+	.enable_streams = max96717_enable_streams,
+	.disable_streams = max96717_disable_streams,
+	.set_routing = max96717_set_routing,
+	.get_fmt = v4l2_subdev_get_fmt,
+	.set_fmt = max96717_set_fmt,
+};
+
+static const struct v4l2_subdev_core_ops max96717_subdev_core_ops = {
+	.log_status = max96717_log_status,
+};
+
+static const struct v4l2_subdev_internal_ops max96717_internal_ops = {
+	.init_state = max96717_init_state,
+};
+
+static const struct v4l2_subdev_ops max96717_subdev_ops = {
+	.core = &max96717_subdev_core_ops,
+	.pad = &max96717_pad_ops,
+};
+
+static const struct media_entity_operations max96717_entity_ops = {
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+static int max96717_notify_bound(struct v4l2_async_notifier *notifier,
+				 struct v4l2_subdev *source_subdev,
+				 struct v4l2_async_connection *asd)
+{
+	struct max96717_priv *priv = sd_to_max96717(notifier->sd);
+	struct device *dev = &priv->client->dev;
+	int ret;
+
+	ret = media_entity_get_fwnode_pad(&source_subdev->entity,
+					  source_subdev->fwnode,
+					  MEDIA_PAD_FL_SOURCE);
+	if (ret < 0) {
+		dev_err(dev, "Failed to find pad for %s\n",
+			source_subdev->name);
+		return ret;
+	}
+
+	priv->source_sd = source_subdev;
+	priv->source_sd_pad = ret;
+
+	ret = media_create_pad_link(&source_subdev->entity, priv->source_sd_pad,
+				    &priv->sd.entity, 0,
+				    MEDIA_LNK_FL_ENABLED |
+				    MEDIA_LNK_FL_IMMUTABLE);
+	if (ret) {
+		dev_err(dev, "Unable to link %s:%u -> %s:0\n",
+			source_subdev->name, priv->source_sd_pad,
+			priv->sd.name);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct v4l2_async_notifier_operations max96717_notify_ops = {
+	.bound = max96717_notify_bound,
+};
+
+static int max96717_v4l2_notifier_register(struct max96717_priv *priv)
+{
+	struct device *dev = &priv->client->dev;
+	struct v4l2_async_connection *asd;
+	struct fwnode_handle *ep_fwnode;
+	int ret;
+
+	ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev),
+						    MAX96717_PAD_SINK, 0, 0);
+	if (!ep_fwnode) {
+		dev_err(dev, "No graph endpoint\n");
+		return -ENODEV;
+	}
+
+	v4l2_async_subdev_nf_init(&priv->notifier, &priv->sd);
+
+	asd = v4l2_async_nf_add_fwnode_remote(&priv->notifier, ep_fwnode,
+					      struct v4l2_async_connection);
+
+	fwnode_handle_put(ep_fwnode);
+
+	if (IS_ERR(asd)) {
+		dev_err(dev, "Failed to add subdev: %ld", PTR_ERR(asd));
+		v4l2_async_nf_cleanup(&priv->notifier);
+		return PTR_ERR(asd);
+	}
+
+	priv->notifier.ops = &max96717_notify_ops;
+
+	ret = v4l2_async_nf_register(&priv->notifier);
+	if (ret) {
+		dev_err(dev, "Failed to register subdev_notifier");
+		v4l2_async_nf_cleanup(&priv->notifier);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void max96717_v4l2_notifier_unregister(struct max96717_priv *priv)
+{
+	v4l2_async_nf_unregister(&priv->notifier);
+	v4l2_async_nf_cleanup(&priv->notifier);
+}
+
+static int max96717_subdev_init(struct max96717_priv *priv)
+{
+	struct device *dev = &priv->client->dev;
+	int ret;
+
+	v4l2_i2c_subdev_init(&priv->sd, priv->client, &max96717_subdev_ops);
+	priv->sd.internal_ops = &max96717_internal_ops;
+
+	priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_STREAMS;
+	priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
+	priv->sd.entity.ops = &max96717_entity_ops;
+
+	priv->pads[MAX96717_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
+	priv->pads[MAX96717_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
+
+	ret = media_entity_pads_init(&priv->sd.entity, 2, priv->pads);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to init pads\n");
+
+	ret = v4l2_subdev_init_finalize(&priv->sd);
+	if (ret) {
+		dev_err_probe(dev, ret,
+			      "v4l2 subdev init finalized failed\n");
+		goto err_entity_cleanup;
+	}
+	ret = max96717_v4l2_notifier_register(priv);
+	if (ret) {
+		dev_err_probe(dev, ret,
+			      "v4l2 subdev notifier register failed\n");
+		goto err_free_state;
+	}
+
+	ret = v4l2_async_register_subdev(&priv->sd);
+	if (ret) {
+		dev_err_probe(dev, ret, "v4l2_async_register_subdev error\n");
+		goto err_unreg_notif;
+	}
+
+	return 0;
+
+err_unreg_notif:
+	max96717_v4l2_notifier_unregister(priv);
+err_free_state:
+	v4l2_subdev_cleanup(&priv->sd);
+err_entity_cleanup:
+	media_entity_cleanup(&priv->sd.entity);
+
+	return ret;
+}
+
+static void max96717_subdev_uninit(struct max96717_priv *priv)
+{
+	v4l2_async_unregister_subdev(&priv->sd);
+	max96717_v4l2_notifier_unregister(priv);
+	v4l2_subdev_cleanup(&priv->sd);
+	media_entity_cleanup(&priv->sd.entity);
+}
+
+struct max96717_pll_predef_freq {
+	unsigned long freq;
+	bool is_alt;
+	u8 val;
+};
+
+static const struct max96717_pll_predef_freq max96717_predef_freqs[] = {
+	{ 13500000, true,  0 }, { 19200000, false, 0 },
+	{ 24000000, true,  1 }, { 27000000, false, 1 },
+	{ 37125000, false, 2 }, { 74250000, false, 3 },
+};
+
+static unsigned long
+max96717_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+	struct max96717_priv *priv = clk_hw_to_max96717(hw);
+
+	return max96717_predef_freqs[priv->pll_predef_index].freq;
+}
+
+static unsigned int max96717_clk_find_best_index(struct max96717_priv *priv,
+						 unsigned long rate)
+{
+	unsigned int i, idx;
+	unsigned long diff_new, diff_old;
+
+	diff_old = U32_MAX;
+	idx = 0;
+
+	for (i = 0; i < ARRAY_SIZE(max96717_predef_freqs); i++) {
+		diff_new = abs(rate - max96717_predef_freqs[i].freq);
+		if (diff_new < diff_old) {
+			diff_old = diff_new;
+			idx = i;
+		}
+	}
+
+	return idx;
+}
+
+static long max96717_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long *parent_rate)
+{
+	struct max96717_priv *priv = clk_hw_to_max96717(hw);
+	struct device *dev = &priv->client->dev;
+	unsigned int idx;
+
+	idx = max96717_clk_find_best_index(priv, rate);
+
+	if (rate != max96717_predef_freqs[idx].freq) {
+		dev_warn(dev, "Request CLK freq:%lu, found CLK freq:%lu\n",
+			 rate, max96717_predef_freqs[idx].freq);
+	}
+
+	return max96717_predef_freqs[idx].freq;
+}
+
+static int max96717_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+				 unsigned long parent_rate)
+{
+	struct max96717_priv *priv = clk_hw_to_max96717(hw);
+	unsigned int val, idx;
+	int ret = 0;
+
+	idx = max96717_clk_find_best_index(priv, rate);
+
+	val = FIELD_PREP(REFGEN_PREDEF_FREQ_MASK,
+			 max96717_predef_freqs[idx].val);
+
+	if (max96717_predef_freqs[idx].is_alt)
+		val |= REFGEN_PREDEF_FREQ_ALT;
+
+	val |= REFGEN_RST | REFGEN_PREDEF_EN;
+
+	cci_write(priv->regmap, REF_VTG0, val, &ret);
+	cci_update_bits(priv->regmap, REF_VTG0, REFGEN_RST | REFGEN_EN,
+			REFGEN_EN, &ret);
+	if (ret)
+		return ret;
+
+	priv->pll_predef_index = idx;
+
+	return 0;
+}
+
+static int max96717_clk_prepare(struct clk_hw *hw)
+{
+	struct max96717_priv *priv = clk_hw_to_max96717(hw);
+
+	return cci_update_bits(priv->regmap, MAX96717_REG6, RCLKEN,
+			       RCLKEN, NULL);
+}
+
+static void max96717_clk_unprepare(struct clk_hw *hw)
+{
+	struct max96717_priv *priv = clk_hw_to_max96717(hw);
+
+	cci_update_bits(priv->regmap, MAX96717_REG6, RCLKEN, 0, NULL);
+}
+
+static const struct clk_ops max96717_clk_ops = {
+	.prepare     = max96717_clk_prepare,
+	.unprepare   = max96717_clk_unprepare,
+	.set_rate    = max96717_clk_set_rate,
+	.recalc_rate = max96717_clk_recalc_rate,
+	.round_rate  = max96717_clk_round_rate,
+};
+
+static int max96717_register_clkout(struct max96717_priv *priv)
+{
+	struct device *dev = &priv->client->dev;
+	struct clk_init_data init = { .ops = &max96717_clk_ops };
+	int ret;
+
+	init.name = kasprintf(GFP_KERNEL, "%s.%s.clk_out", priv->data->model,
+			      dev_name(dev));
+	if (!init.name)
+		return -ENOMEM;
+
+	/* RCLKSEL Reference PLL output */
+	ret = cci_update_bits(priv->regmap, REG3, MAX96717_RCLKSEL,
+			      RCLKSEL_REF_PLL, NULL);
+	/* MFP4 fastest slew rate */
+	cci_update_bits(priv->regmap, PIO_SLEW_1, BIT(5) | BIT(4), 0, &ret);
+	if (ret)
+		goto free_init_name;
+
+	priv->clk_hw.init = &init;
+
+	/* Initialize to 24 MHz */
+	ret = max96717_clk_set_rate(&priv->clk_hw,
+				    MAX96717_DEFAULT_CLKOUT_RATE, 0);
+	if (ret < 0)
+		goto free_init_name;
+
+	ret = devm_clk_hw_register(dev, &priv->clk_hw);
+	kfree(init.name);
+	if (ret)
+		return dev_err_probe(dev, ret, "Cannot register clock HW\n");
+
+	ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
+					  &priv->clk_hw);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Cannot add OF clock provider\n");
+
+	return 0;
+
+free_init_name:
+	kfree(init.name);
+	return ret;
+}
+
+static int max96717_init_csi_lanes(struct max96717_priv *priv)
+{
+	struct v4l2_mbus_config_mipi_csi2 *mipi = &priv->mipi_csi2;
+	unsigned long lanes_used = 0;
+	unsigned int nlanes, lane, val = 0;
+	int ret;
+
+	nlanes = mipi->num_data_lanes;
+
+	ret = cci_update_bits(priv->regmap, MAX96717_MIPI_RX1,
+			      MAX96717_MIPI_LANES_CNT,
+			      FIELD_PREP(MAX96717_MIPI_LANES_CNT,
+					 nlanes - 1), NULL);
+
+	/* lanes polarity */
+	for (lane = 0; lane < nlanes + 1; lane++) {
+		if (!mipi->lane_polarities[lane])
+			continue;
+		/* Clock lane */
+		if (lane == 0)
+			val |= BIT(2);
+		else if (lane < 3)
+			val |= BIT(lane - 1);
+		else
+			val |= BIT(lane);
+	}
+
+	cci_update_bits(priv->regmap, MAX96717_MIPI_RX5,
+			MAX96717_PHY2_LANES_POL,
+			FIELD_PREP(MAX96717_PHY2_LANES_POL, val), &ret);
+
+	cci_update_bits(priv->regmap, MAX96717_MIPI_RX4,
+			MAX96717_PHY1_LANES_POL,
+			FIELD_PREP(MAX96717_PHY1_LANES_POL,
+				   val >> 3), &ret);
+	/* lanes mapping */
+	for (lane = 0, val = 0; lane < nlanes; lane++) {
+		val |= (mipi->data_lanes[lane] - 1) << (lane * 2);
+		lanes_used |= BIT(mipi->data_lanes[lane] - 1);
+	}
+
+	/*
+	 * Unused lanes need to be mapped as well to not have
+	 * the same lanes mapped twice.
+	 */
+	for (; lane < 4; lane++) {
+		unsigned int idx = find_first_zero_bit(&lanes_used, 4);
+
+		val |= idx << (lane * 2);
+		lanes_used |= BIT(idx);
+	}
+
+	cci_update_bits(priv->regmap, MAX96717_MIPI_RX3,
+			MAX96717_PHY1_LANES_MAP,
+			FIELD_PREP(MAX96717_PHY1_LANES_MAP, val), &ret);
+
+	return cci_update_bits(priv->regmap, MAX96717_MIPI_RX2,
+			       MAX96717_PHY2_LANES_MAP,
+			       FIELD_PREP(MAX96717_PHY2_LANES_MAP, val >> 4),
+			       &ret);
+}
+
+static int max96717_hw_init(struct max96717_priv *priv)
+{
+	struct device *dev = &priv->client->dev;
+	u64 val;
+	int ret;
+
+	ret = cci_read(priv->regmap, MAX96717_DEV_ID, &val, NULL);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Fail to read the device id\n");
+
+	if (val != priv->data->device_id)
+		return dev_err_probe(dev, -EOPNOTSUPP,
+				     "Unsupported device id expected %x got %x\n",
+				     priv->data->device_id, (u8)val);
+
+	ret = cci_read(priv->regmap, MAX96717_DEV_REV, &val, NULL);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Fail to read device revision");
+
+	dev_dbg(dev, "Found %x (rev %lx)\n", priv->data->device_id,
+		(u8)val & MAX96717_DEV_REV_MASK);
+
+	ret = cci_read(priv->regmap, MAX96717_MIPI_RX_EXT11, &val, NULL);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Fail to read mipi rx extension");
+
+	if (!(val & MAX96717_TUN_MODE))
+		return dev_err_probe(dev, -EOPNOTSUPP,
+				     "Only supporting tunnel mode");
+
+	return max96717_init_csi_lanes(priv);
+}
+
+static int max96717_parse_dt(struct max96717_priv *priv)
+{
+	struct device *dev = &priv->client->dev;
+	struct v4l2_fwnode_endpoint vep = {
+		.bus_type = V4L2_MBUS_CSI2_DPHY
+	};
+	struct fwnode_handle *ep_fwnode;
+	unsigned char num_data_lanes;
+	int ret;
+
+	ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev),
+						    MAX96717_PAD_SINK, 0, 0);
+	if (!ep_fwnode)
+		return dev_err_probe(dev, -ENOENT, "no endpoint found\n");
+
+	ret = v4l2_fwnode_endpoint_parse(ep_fwnode, &vep);
+
+	fwnode_handle_put(ep_fwnode);
+
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Failed to parse sink endpoint");
+
+	num_data_lanes = vep.bus.mipi_csi2.num_data_lanes;
+	if (num_data_lanes < 1 || num_data_lanes > 4)
+		return dev_err_probe(dev, -EINVAL,
+				     "Invalid data lanes must be 1 to 4\n");
+
+	memcpy(&priv->mipi_csi2, &vep.bus.mipi_csi2, sizeof(priv->mipi_csi2));
+
+	return 0;
+}
+
+static int max96717_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct max96717_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->client = client;
+	priv->data = of_device_get_match_data(&client->dev);
+
+	i2c_set_clientdata(client, priv);
+
+	priv->regmap = devm_cci_regmap_init_i2c(client, 16);
+	if (IS_ERR(priv->regmap)) {
+		ret = PTR_ERR(priv->regmap);
+		return dev_err_probe(dev, ret, "Failed to init regmap\n");
+	}
+
+	ret = max96717_parse_dt(priv);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to parse the dt\n");
+
+	ret = max96717_hw_init(priv);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to initialize the hardware\n");
+
+	ret = max96717_gpiochip_probe(priv);
+	if (ret) {
+		dev_err(&client->dev, "Failed to init gpiochip\n");
+		return ret;
+	}
+
+	ret = max96717_register_clkout(priv);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to register clkout\n");
+
+	ret = max96717_subdev_init(priv);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to initialize v4l2 subdev\n");
+
+	ret = max96717_i2c_mux_init(priv);
+	if (ret) {
+		dev_err_probe(dev, ret, "failed to add remote i2c adapter\n");
+		max96717_subdev_uninit(priv);
+	}
+
+	return ret;
+}
+
+static void max96717_remove(struct i2c_client *client)
+{
+	struct max96717_priv *priv = i2c_get_clientdata(client);
+
+	max96717_subdev_uninit(priv);
+	i2c_mux_del_adapters(priv->mux);
+}
+
+static const struct of_device_id max96717_of_ids[] = {
+	{ .compatible = "maxim,max96717f", .data = &max96717f_data },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max96717_of_ids);
+
+static struct i2c_driver max96717_i2c_driver = {
+	.driver	= {
+		.name		= "max96717",
+		.of_match_table	= max96717_of_ids,
+	},
+	.probe		= max96717_probe,
+	.remove		= max96717_remove,
+};
+
+module_i2c_driver(max96717_i2c_driver);
+
+MODULE_DESCRIPTION("Maxim GMSL2 MAX96717 Serializer Driver");
+MODULE_AUTHOR("Julien Massot <julien.massot@collabora.com>");
+MODULE_LICENSE("GPL");
-- 
2.44.0


^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [PATCH v4 4/4] media: i2c: add MAX96714 driver
  2024-03-05 15:26 [PATCH v4 0/4] Add support for MAX96714F and MAX96717F GMSL2 ser/des Julien Massot
                   ` (2 preceding siblings ...)
  2024-03-05 15:26 ` [PATCH v4 3/4] media: i2c: add MAX96717 driver Julien Massot
@ 2024-03-05 15:26 ` Julien Massot
  3 siblings, 0 replies; 11+ messages in thread
From: Julien Massot @ 2024-03-05 15:26 UTC (permalink / raw)
  To: linux-media
  Cc: kernel, devicetree, linux-kernel, mchehab, robh+dt,
	krzysztof.kozlowski+dt, conor+dt, sakari.ailus, Julien Massot

This driver handle the MAX96714 deserializer in tunnel mode.
The CSI output will replicate all the CSI traffic forwarded by
the remote serializer.

Signed-off-by: Julien Massot <julien.massot@collabora.com>
---
Change since v3:
 - Maintainers: align to the new binding path
 - Kconfig: better describe the symbol
 - Aligned the macro
 - Store the v4l2_mbus_config_mipi_csi2 structure instead of the full endpoint in the driver private structure
 - moved ret variables declaration at last
 - Removed extra new lines
 - Return the v4l2_subdev_set_routing_with_fmt result in _max96714_set_routing
 - Use v4l2_subdev_s_stream_helper instead of the custom max96714_s_stream function
 - Removed unnecessary check 'if (priv->tx_link_freq < 0)' in create_subdev since dt is already validated in max96714_parse_dt_txport
 - Use div_u64 to fix compilation on 32 bits platforms
 - Specify D-PHY for fwnode endpoint parsing since the MAX96714 only supports D-PHY
 - Simplify parse_dt function by parsing first the tx_port so that we no longer have to call fwnode_handle_put(priv->rxport.source.ep_fwnode);
 - Do not initialize regmap twice
 - Use unsigned int instead of u8

Change since v2:
 - Use CCI helpers instead of recoding register access
 - add missing bitfield header
 - Add pattern generator so the deserializer can be tested without a serializer/sensor
---
 MAINTAINERS                  |    7 +
 drivers/media/i2c/Kconfig    |   14 +
 drivers/media/i2c/Makefile   |    1 +
 drivers/media/i2c/max96714.c | 1028 ++++++++++++++++++++++++++++++++++
 4 files changed, 1050 insertions(+)
 create mode 100644 drivers/media/i2c/max96714.c

diff --git a/MAINTAINERS b/MAINTAINERS
index c97445b2483b..236267cc7d12 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13181,6 +13181,13 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
 F:	drivers/staging/media/max96712/max96712.c
 
+MAX96714 GMSL2 DESERIALIZER DRIVER
+M:	Julien Massot <julien.massot@collabora.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/media/i2c/maxim,max96714.yaml
+F:	drivers/media/i2c/max96714.c
+
 MAX96717 GMSL2 SERIALIZER DRIVER
 M:	Julien Massot <julien.massot@collabora.com>
 L:	linux-media@vger.kernel.org
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 1a99396edbcf..64fc4c1c1fc1 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -1573,6 +1573,20 @@ config VIDEO_DS90UB960
 	  Device driver for the Texas Instruments DS90UB960
 	  FPD-Link III Deserializer and DS90UB9702 FPD-Link IV Deserializer.
 
+config VIDEO_MAX96714
+	tristate "Maxim MAX96714 GMSL2 deserializer"
+	depends on OF && I2C && VIDEO_DEV
+	select I2C_MUX
+	select GPIOLIB
+	select V4L2_CCI_I2C
+	help
+	  Device driver for the Maxim MAX96714 GMSL2 Deserializer.
+	  MAX96714 deserializers convert a GMSL2 input to MIPI CSI-2
+	  output.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called max96714.
+
 config VIDEO_MAX96717
 	tristate "Maxim MAX96717 GMSL2 Serializer support"
 	depends on OF && I2C && VIDEO_DEV && COMMON_CLK
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index 9e007116f929..7c794441eaff 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -64,6 +64,7 @@ obj-$(CONFIG_VIDEO_LM3646) += lm3646.o
 obj-$(CONFIG_VIDEO_M52790) += m52790.o
 obj-$(CONFIG_VIDEO_MAX9271_LIB) += max9271.o
 obj-$(CONFIG_VIDEO_MAX9286) += max9286.o
+obj-$(CONFIG_VIDEO_MAX96714) += max96714.o
 obj-$(CONFIG_VIDEO_MAX96717) += max96717.o
 obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o
 obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o
diff --git a/drivers/media/i2c/max96714.c b/drivers/media/i2c/max96714.c
new file mode 100644
index 000000000000..902a48c324bc
--- /dev/null
+++ b/drivers/media/i2c/max96714.c
@@ -0,0 +1,1028 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Maxim GMSL2 Deserializer Driver
+ *
+ * Copyright (C) 2024 Collabora Ltd.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/fwnode.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+#include <media/v4l2-cci.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-subdev.h>
+
+#define MAX96714F_DEVICE_ID 0xca
+#define MAX96714_NPORTS     2
+#define MAX96714_PAD_SINK   0
+#define MAX96714_PAD_SOURCE 1
+
+/* DEV */
+#define MAX96714_REG13                 CCI_REG8(0x0d)
+#define MAX96714_DEV_REV               CCI_REG8(0x0e)
+#define MAX96714_DEV_REV_MASK          GENMASK(3, 0)
+#define MAX96714_LINK_LOCK             CCI_REG8(0x13)
+#define MAX96714_LINK_LOCK_BIT         BIT(3)
+#define MAX96714_IO_CHK0               CCI_REG8(0x38)
+#define MAX96714_PATTERN_CLK_FREQ      GENMASK(1, 0)
+/* VID_RX */
+#define MAX96714_VIDEO_RX8             CCI_REG8(0x11a)
+#define MAX96714_VID_LOCK              BIT(6)
+
+/* VRX_PATGEN_0 */
+#define MAX96714_PATGEN_0              CCI_REG8(0x240)
+#define MAX96714_PATGEN_1              CCI_REG8(0x241)
+#define MAX96714_PATGEN_MODE           GENMASK(5, 4)
+#define MAX96714_PATGEN_VS_DLY         CCI_REG24(0x242)
+#define MAX96714_PATGEN_VS_HIGH        CCI_REG24(0x245)
+#define MAX96714_PATGEN_VS_LOW         CCI_REG24(0x248)
+#define MAX96714_PATGEN_V2H            CCI_REG24(0x24b)
+#define MAX96714_PATGEN_HS_HIGH        CCI_REG16(0x24e)
+#define MAX96714_PATGEN_HS_LOW         CCI_REG16(0x250)
+#define MAX96714_PATGEN_HS_CNT         CCI_REG16(0x252)
+#define MAX96714_PATGEN_V2D            CCI_REG24(0x254)
+#define MAX96714_PATGEN_DE_HIGH        CCI_REG16(0x257)
+#define MAX96714_PATGEN_DE_LOW         CCI_REG16(0x259)
+#define MAX96714_PATGEN_DE_CNT         CCI_REG16(0x25B)
+#define MAX96714_PATGEN_GRAD_INC       CCI_REG8(0x25d)
+#define MAX96714_PATGEN_CHKB_COLOR_A   CCI_REG24(0x25E)
+#define MAX96714_PATGEN_CHKB_COLOR_B   CCI_REG24(0x261)
+#define MAX96714_PATGEN_CHKB_RPT_CNT_A CCI_REG8(0x264)
+#define MAX96714_PATGEN_CHKB_RPT_CNT_B CCI_REG8(0x265)
+#define MAX96714_PATGEN_CHKB_ALT       CCI_REG8(0x266)
+/* BACKTOP */
+#define MAX96714_BACKTOP25             CCI_REG8(0x320)
+#define CSI_DPLL_FREQ_MASK             GENMASK(4, 0)
+
+/* MIPI_PHY */
+#define MAX96714_MIPI_PHY0             CCI_REG8(0x330)
+#define MAX96714_FORCE_CSI_OUT         BIT(7)
+#define MAX96714_MIPI_STDBY_N          CCI_REG8(0x332)
+#define MAX96714_MIPI_STDBY_MASK       GENMASK(5, 4)
+#define MAX96714_MIPI_LANE_MAP         CCI_REG8(0x333)
+#define MAX96714_MIPI_POLARITY         CCI_REG8(0x335)
+#define MAX96714_MIPI_POLARITY_MASK    GENMASK(5, 0)
+
+/* MIPI_TX */
+#define MAX96714_MIPI_LANE_CNT         CCI_REG8(0x44a)
+#define MAX96714_CSI2_LANE_CNT_MASK    GENMASK(7, 6)
+#define MAX96714_MIPI_TX52             CCI_REG8(0x474)
+#define MAX96714_TUN_EN                BIT(0)
+
+#define MHZ(v) ((u32)((v)  * 1000000U))
+
+enum max96714_vpg_mode {
+	MAX96714_VPG_DISABLED = 0,
+	MAX96714_VPG_CHECKERBOARD = 1,
+	MAX96714_VPG_GRADIENT = 2,
+};
+
+struct max96714_rxport {
+	struct {
+		struct v4l2_subdev   *sd;
+		u16                  pad;
+		struct fwnode_handle *ep_fwnode;
+	} source;
+	struct regulator	     *poc;
+};
+
+struct max96714_txport {
+	struct v4l2_fwnode_endpoint vep;
+};
+
+struct max96714_priv {
+	struct i2c_client                 *client;
+	struct regmap                     *regmap;
+	struct gpio_desc                  *pd_gpio;
+	struct max96714_rxport            rxport;
+	struct i2c_mux_core               *mux;
+	u64                               enabled_source_streams;
+	struct v4l2_subdev		  sd;
+	struct media_pad		  pads[MAX96714_NPORTS];
+	struct v4l2_mbus_config_mipi_csi2 mipi_csi2;
+	struct v4l2_ctrl_handler          ctrl_handler;
+	struct v4l2_async_notifier        notifier;
+	s64                               tx_link_freq;
+	enum max96714_vpg_mode            pattern;
+};
+
+static inline struct max96714_priv *sd_to_max96714(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct max96714_priv, sd);
+}
+
+static int max96714_enable_tx_port(struct max96714_priv *priv)
+{
+	return cci_update_bits(priv->regmap, MAX96714_MIPI_STDBY_N,
+			       MAX96714_MIPI_STDBY_MASK,
+			       MAX96714_MIPI_STDBY_MASK, NULL);
+}
+
+static int max96714_disable_tx_port(struct max96714_priv *priv)
+{
+	return cci_update_bits(priv->regmap, MAX96714_MIPI_STDBY_N,
+			       MAX96714_MIPI_STDBY_MASK, 0, NULL);
+}
+
+static bool max96714_tx_port_enabled(struct max96714_priv *priv)
+{
+	u64 val;
+
+	cci_read(priv->regmap, MAX96714_MIPI_STDBY_N, &val, NULL);
+
+	return val & MAX96714_MIPI_STDBY_MASK;
+}
+
+static int max96714_apply_patgen_timing(struct max96714_priv *priv,
+					struct v4l2_subdev_state *state)
+{
+	struct v4l2_mbus_framefmt *fmt =
+		v4l2_subdev_state_get_format(state, MAX96714_PAD_SOURCE);
+	const u32 h_active = fmt->width;
+	const u32 h_fp = 88;
+	const u32 h_sw = 44;
+	const u32 h_bp = 148;
+	u32 h_tot;
+
+	const u32 v_active = fmt->height;
+	const u32 v_fp = 4;
+	const u32 v_sw = 5;
+	const u32 v_bp = 36;
+	u32 v_tot;
+	int ret = 0;
+
+	h_tot = h_active + h_fp + h_sw + h_bp;
+	v_tot = v_active + v_fp + v_sw + v_bp;
+
+	/* 75 Mhz pixel clock */
+	cci_update_bits(priv->regmap, MAX96714_IO_CHK0,
+			MAX96714_PATTERN_CLK_FREQ, 1, &ret);
+
+	dev_info(&priv->client->dev, "height: %d width: %d\n", fmt->height,
+		 fmt->width);
+
+	cci_write(priv->regmap, MAX96714_PATGEN_VS_DLY, 0, &ret);
+	cci_write(priv->regmap, MAX96714_PATGEN_VS_HIGH, v_sw * h_tot, &ret);
+	cci_write(priv->regmap, MAX96714_PATGEN_VS_LOW,
+		  (v_active + v_fp + v_bp) * h_tot, &ret);
+	cci_write(priv->regmap, MAX96714_PATGEN_HS_HIGH, h_sw, &ret);
+	cci_write(priv->regmap, MAX96714_PATGEN_HS_LOW, h_active + h_fp + h_bp,
+		  &ret);
+	cci_write(priv->regmap, MAX96714_PATGEN_V2D,
+		  h_tot * (v_sw + v_bp) + (h_sw + h_bp), &ret);
+	cci_write(priv->regmap, MAX96714_PATGEN_HS_CNT, v_tot, &ret);
+	cci_write(priv->regmap, MAX96714_PATGEN_DE_HIGH, h_active, &ret);
+	cci_write(priv->regmap, MAX96714_PATGEN_DE_LOW, h_fp + h_sw + h_bp,
+		  &ret);
+	cci_write(priv->regmap, MAX96714_PATGEN_DE_CNT, v_active, &ret);
+	/* B G R */
+	cci_write(priv->regmap, MAX96714_PATGEN_CHKB_COLOR_A, 0xfecc00, &ret);
+	/* B G R */
+	cci_write(priv->regmap, MAX96714_PATGEN_CHKB_COLOR_B, 0x006aa7, &ret);
+	cci_write(priv->regmap, MAX96714_PATGEN_CHKB_RPT_CNT_A, 0x3c, &ret);
+	cci_write(priv->regmap, MAX96714_PATGEN_CHKB_RPT_CNT_B, 0x3c, &ret);
+	cci_write(priv->regmap, MAX96714_PATGEN_CHKB_ALT, 0x3c, &ret);
+	cci_write(priv->regmap, MAX96714_PATGEN_GRAD_INC, 0x10, &ret);
+
+	return ret;
+}
+
+static int max96714_apply_patgen(struct max96714_priv *priv,
+				 struct v4l2_subdev_state *state)
+{
+	unsigned int val;
+	int ret = 0;
+
+	if (priv->pattern)
+		ret = max96714_apply_patgen_timing(priv, state);
+
+	cci_write(priv->regmap, MAX96714_PATGEN_0, priv->pattern ? 0xfb : 0,
+		  &ret);
+
+	val = FIELD_PREP(MAX96714_PATGEN_MODE, priv->pattern);
+	cci_update_bits(priv->regmap, MAX96714_PATGEN_1, MAX96714_PATGEN_MODE,
+			val, &ret);
+	return ret;
+}
+
+static int max96714_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct max96714_priv *priv =
+		container_of(ctrl->handler, struct max96714_priv, ctrl_handler);
+	int ret;
+
+	switch (ctrl->id) {
+	case V4L2_CID_TEST_PATTERN:
+		priv->pattern = ctrl->val;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = cci_update_bits(priv->regmap, MAX96714_MIPI_PHY0,
+			      MAX96714_FORCE_CSI_OUT,
+			      priv->pattern ? MAX96714_FORCE_CSI_OUT : 0, NULL);
+
+	/* Pattern generator doesn't work with tunnel mode */
+	return cci_update_bits(priv->regmap, MAX96714_MIPI_TX52,
+			       MAX96714_TUN_EN,
+			       priv->pattern ? 0 : MAX96714_TUN_EN, &ret);
+}
+
+static const char * const max96714_test_pattern[] = {
+	"Disabled",
+	"Checkerboard",
+	"Gradient"
+};
+
+static const struct v4l2_ctrl_ops max96714_ctrl_ops = {
+	.s_ctrl = max96714_s_ctrl,
+};
+
+static int max96714_enable_streams(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_state *state,
+				   u32 source_pad, u64 streams_mask)
+{
+	struct max96714_priv *priv = sd_to_max96714(sd);
+	u64 sink_streams;
+	int ret;
+
+	if (!priv->enabled_source_streams)
+		max96714_enable_tx_port(priv);
+
+	ret = max96714_apply_patgen(priv, state);
+	if (ret)
+		goto err;
+
+	if (!priv->pattern) {
+		if (!priv->rxport.source.sd) {
+			ret = -ENODEV;
+			goto err;
+		}
+
+		sink_streams =
+			v4l2_subdev_state_xlate_streams(state,
+							MAX96714_PAD_SOURCE,
+							MAX96714_PAD_SINK,
+							&streams_mask);
+
+		ret = v4l2_subdev_enable_streams(priv->rxport.source.sd,
+						 priv->rxport.source.pad,
+						 sink_streams);
+		if (ret)
+			goto err;
+	}
+
+	priv->enabled_source_streams |= streams_mask;
+
+	return 0;
+
+err:
+	if (!priv->enabled_source_streams)
+		max96714_disable_tx_port(priv);
+
+	return ret;
+}
+
+static int max96714_disable_streams(struct v4l2_subdev *sd,
+				    struct v4l2_subdev_state *state,
+				    u32 source_pad, u64 streams_mask)
+{
+	struct max96714_priv *priv = sd_to_max96714(sd);
+	u64 sink_streams;
+	int ret;
+
+	if (!priv->pattern && priv->rxport.source.sd) {
+		sink_streams =
+			v4l2_subdev_state_xlate_streams(state,
+							MAX96714_PAD_SOURCE,
+							MAX96714_PAD_SINK,
+							&streams_mask);
+
+		ret = v4l2_subdev_disable_streams(priv->rxport.source.sd,
+						  priv->rxport.source.pad,
+						  sink_streams);
+		if (ret)
+			return ret;
+	}
+
+	priv->enabled_source_streams &= ~streams_mask;
+
+	if (!priv->enabled_source_streams)
+		max96714_disable_tx_port(priv);
+
+	return 0;
+}
+
+static int max96714_set_fmt(struct v4l2_subdev *sd,
+			    struct v4l2_subdev_state *state,
+			    struct v4l2_subdev_format *format)
+{
+	struct max96714_priv *priv = sd_to_max96714(sd);
+	struct v4l2_mbus_framefmt *fmt;
+
+	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE &&
+	    priv->enabled_source_streams)
+		return -EBUSY;
+
+	/* No transcoding, source and sink formats must match. */
+	if (format->pad == MAX96714_PAD_SOURCE)
+		return v4l2_subdev_get_fmt(sd, state, format);
+
+	fmt = v4l2_subdev_state_get_format(state, format->pad, format->stream);
+	if (!fmt)
+		return -EINVAL;
+
+	*fmt = format->format;
+
+	fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad,
+							   format->stream);
+	if (!fmt)
+		return -EINVAL;
+
+	*fmt = format->format;
+
+	return 0;
+}
+
+static int _max96714_set_routing(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_state *state,
+				 enum v4l2_subdev_format_whence which,
+				 struct v4l2_subdev_krouting *routing)
+{
+	static const struct v4l2_mbus_framefmt format = {
+		.width = 1280,
+		.height = 1080,
+		.code = MEDIA_BUS_FMT_Y8_1X8,
+		.field = V4L2_FIELD_NONE,
+	};
+	int ret;
+
+	/*
+	 * Note: we can only support up to V4L2_FRAME_DESC_ENTRY_MAX, until
+	 * frame desc is made dynamically allocated.
+	 */
+	if (routing->num_routes > V4L2_FRAME_DESC_ENTRY_MAX)
+		return -EINVAL;
+
+	ret = v4l2_subdev_routing_validate(sd, routing,
+					   V4L2_SUBDEV_ROUTING_ONLY_1_TO_1);
+	if (ret)
+		return ret;
+
+	return v4l2_subdev_set_routing_with_fmt(sd, state, routing, &format);
+}
+
+static int max96714_set_routing(struct v4l2_subdev *sd,
+				struct v4l2_subdev_state *state,
+				enum v4l2_subdev_format_whence which,
+				struct v4l2_subdev_krouting *routing)
+{
+	struct max96714_priv *priv = sd_to_max96714(sd);
+
+	if (which == V4L2_SUBDEV_FORMAT_ACTIVE && priv->enabled_source_streams)
+		return -EBUSY;
+
+	return _max96714_set_routing(sd, state, which, routing);
+}
+
+static int max96714_init_state(struct v4l2_subdev *sd,
+			       struct v4l2_subdev_state *state)
+{
+	struct v4l2_subdev_route routes[] = {
+		{
+			.sink_pad = MAX96714_PAD_SINK,
+			.sink_stream = 0,
+			.source_pad = MAX96714_PAD_SOURCE,
+			.source_stream = 0,
+			.flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE,
+		}
+	};
+	struct v4l2_subdev_krouting routing = {
+		.num_routes = ARRAY_SIZE(routes),
+		.routes = routes,
+	};
+
+	return _max96714_set_routing(sd, state, V4L2_SUBDEV_FORMAT_ACTIVE,
+				     &routing);
+}
+
+static const struct v4l2_subdev_pad_ops max96714_pad_ops = {
+	.enable_streams = max96714_enable_streams,
+	.disable_streams = max96714_disable_streams,
+
+	.set_routing = max96714_set_routing,
+	.get_fmt = v4l2_subdev_get_fmt,
+	.set_fmt = max96714_set_fmt,
+};
+
+static bool max96714_link_locked(struct max96714_priv *priv)
+{
+	u64 val = 0;
+
+	cci_read(priv->regmap, MAX96714_LINK_LOCK, &val, NULL);
+
+	return val & MAX96714_LINK_LOCK_BIT;
+}
+
+static void max96714_link_status(struct max96714_priv *priv)
+{
+	struct device *dev = &priv->client->dev;
+
+	dev_info(dev, "Link locked:%d\n", max96714_link_locked(priv));
+}
+
+static bool max96714_pipe_locked(struct max96714_priv *priv)
+{
+	u64 val;
+
+	cci_read(priv->regmap, MAX96714_VIDEO_RX8, &val, NULL);
+
+	return val & MAX96714_VID_LOCK;
+}
+
+static void max96714_pipe_status(struct max96714_priv *priv)
+{
+	struct device *dev = &priv->client->dev;
+
+	dev_info(dev, "Pipe vidlock:%d\n", max96714_pipe_locked(priv));
+}
+
+static void max96714_csi_status(struct max96714_priv *priv)
+{
+	struct device *dev = &priv->client->dev;
+	u64 freq = 0;
+
+	cci_read(priv->regmap, MAX96714_BACKTOP25, &freq, NULL);
+	freq = FIELD_GET(CSI_DPLL_FREQ_MASK, freq);
+
+	dev_info(dev, "CSI controller DPLL freq:%u00MHz CSIPHY enabled:%d\n",
+		 (u8)freq, max96714_tx_port_enabled(priv));
+}
+
+static int max96714_log_status(struct v4l2_subdev *sd)
+{
+	struct max96714_priv *priv = sd_to_max96714(sd);
+	struct device *dev = &priv->client->dev;
+
+	dev_info(dev, "Deserializer: max96714\n");
+
+	max96714_link_status(priv);
+	max96714_pipe_status(priv);
+	max96714_csi_status(priv);
+
+	return 0;
+}
+
+static const struct v4l2_subdev_core_ops max96714_subdev_core_ops = {
+	.log_status = max96714_log_status,
+};
+
+static const struct v4l2_subdev_video_ops max96714_video_ops = {
+	.s_stream	= v4l2_subdev_s_stream_helper,
+};
+
+static const struct v4l2_subdev_internal_ops max96714_internal_ops = {
+	.init_state = max96714_init_state,
+};
+
+static const struct v4l2_subdev_ops max96714_subdev_ops = {
+	.video = &max96714_video_ops,
+	.core = &max96714_subdev_core_ops,
+	.pad = &max96714_pad_ops,
+};
+
+static const struct media_entity_operations max96714_entity_ops = {
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+static int max96714_notify_bound(struct v4l2_async_notifier *notifier,
+				 struct v4l2_subdev *subdev,
+				 struct v4l2_async_connection *asd)
+{
+	struct max96714_priv *priv = sd_to_max96714(notifier->sd);
+	struct device *dev = &priv->client->dev;
+	int ret;
+
+	ret = media_entity_get_fwnode_pad(&subdev->entity,
+					  priv->rxport.source.ep_fwnode,
+					  MEDIA_PAD_FL_SOURCE);
+	if (ret < 0) {
+		dev_err(dev, "Failed to find pad for %s\n", subdev->name);
+		return ret;
+	}
+
+	priv->rxport.source.sd = subdev;
+	priv->rxport.source.pad = ret;
+
+	ret = media_create_pad_link(&priv->rxport.source.sd->entity,
+				    priv->rxport.source.pad, &priv->sd.entity,
+				    MAX96714_PAD_SINK,
+				    MEDIA_LNK_FL_ENABLED |
+				    MEDIA_LNK_FL_IMMUTABLE);
+	if (ret) {
+		dev_err(dev, "Unable to link %s:%u -> %s:%u\n",
+			priv->rxport.source.sd->name, priv->rxport.source.pad,
+			priv->sd.name, MAX96714_PAD_SINK);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct v4l2_async_notifier_operations max96714_notify_ops = {
+	.bound = max96714_notify_bound,
+};
+
+static int max96714_v4l2_notifier_register(struct max96714_priv *priv)
+{
+	struct device *dev = &priv->client->dev;
+	struct max96714_rxport *rxport = &priv->rxport;
+	struct v4l2_async_connection *asd;
+	int ret;
+
+	if (!rxport->source.ep_fwnode)
+		return 0;
+
+	v4l2_async_subdev_nf_init(&priv->notifier, &priv->sd);
+
+	asd = v4l2_async_nf_add_fwnode(&priv->notifier,
+				       rxport->source.ep_fwnode,
+				       struct v4l2_async_connection);
+	if (IS_ERR(asd)) {
+		dev_err(dev, "Failed to add subdev: %pe", asd);
+		v4l2_async_nf_cleanup(&priv->notifier);
+		return PTR_ERR(asd);
+	}
+
+	priv->notifier.ops = &max96714_notify_ops;
+
+	ret = v4l2_async_nf_register(&priv->notifier);
+	if (ret) {
+		dev_err(dev, "Failed to register subdev_notifier");
+		v4l2_async_nf_cleanup(&priv->notifier);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void max96714_v4l2_notifier_unregister(struct max96714_priv *priv)
+{
+	v4l2_async_nf_unregister(&priv->notifier);
+	v4l2_async_nf_cleanup(&priv->notifier);
+}
+
+static int max96714_create_subdev(struct max96714_priv *priv)
+{
+	struct device *dev = &priv->client->dev;
+	int ret;
+
+	v4l2_i2c_subdev_init(&priv->sd, priv->client, &max96714_subdev_ops);
+	priv->sd.internal_ops = &max96714_internal_ops;
+
+	v4l2_ctrl_handler_init(&priv->ctrl_handler, 1);
+	priv->sd.ctrl_handler = &priv->ctrl_handler;
+
+	v4l2_ctrl_new_int_menu(&priv->ctrl_handler, NULL, V4L2_CID_LINK_FREQ,
+			       0, 0, &priv->tx_link_freq);
+	if (priv->ctrl_handler.error) {
+		ret = priv->ctrl_handler.error;
+		goto err_free_ctrl;
+	}
+
+	v4l2_ctrl_new_std_menu_items(&priv->ctrl_handler,
+				     &max96714_ctrl_ops,
+				     V4L2_CID_TEST_PATTERN,
+				     ARRAY_SIZE(max96714_test_pattern) - 1,
+				     0, 0, max96714_test_pattern);
+	if (priv->ctrl_handler.error) {
+		ret = priv->ctrl_handler.error;
+		goto err_free_ctrl;
+	}
+
+	priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_STREAMS;
+	priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
+	priv->sd.entity.ops = &max96714_entity_ops;
+
+	priv->pads[MAX96714_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
+	priv->pads[MAX96714_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
+
+	ret = media_entity_pads_init(&priv->sd.entity,
+				     MAX96714_NPORTS,
+				     priv->pads);
+	if (ret)
+		goto err_free_ctrl;
+
+	priv->sd.state_lock = priv->sd.ctrl_handler->lock;
+
+	ret = v4l2_subdev_init_finalize(&priv->sd);
+	if (ret)
+		goto err_entity_cleanup;
+
+	ret = max96714_v4l2_notifier_register(priv);
+	if (ret) {
+		dev_err(dev, "v4l2 subdev notifier register failed: %d\n", ret);
+		goto err_subdev_cleanup;
+	}
+
+	ret = v4l2_async_register_subdev(&priv->sd);
+	if (ret) {
+		dev_err(dev, "v4l2_async_register_subdev error: %d\n", ret);
+		goto err_unreg_notif;
+	}
+
+	return 0;
+
+err_unreg_notif:
+	max96714_v4l2_notifier_unregister(priv);
+err_subdev_cleanup:
+	v4l2_subdev_cleanup(&priv->sd);
+err_entity_cleanup:
+	media_entity_cleanup(&priv->sd.entity);
+err_free_ctrl:
+	v4l2_ctrl_handler_free(&priv->ctrl_handler);
+
+	return ret;
+};
+
+static void max96714_destroy_subdev(struct max96714_priv *priv)
+{
+	max96714_v4l2_notifier_unregister(priv);
+	v4l2_async_unregister_subdev(&priv->sd);
+
+	v4l2_subdev_cleanup(&priv->sd);
+
+	media_entity_cleanup(&priv->sd.entity);
+	v4l2_ctrl_handler_free(&priv->ctrl_handler);
+}
+
+static int max96714_i2c_mux_select(struct i2c_mux_core *mux, u32 chan)
+{
+	return 0;
+}
+
+static int max96714_i2c_mux_init(struct max96714_priv *priv)
+{
+	priv->mux = i2c_mux_alloc(priv->client->adapter, &priv->client->dev,
+				  1, 0, I2C_MUX_LOCKED | I2C_MUX_GATE,
+				  max96714_i2c_mux_select, NULL);
+	if (!priv->mux)
+		return -ENOMEM;
+
+	return i2c_mux_add_adapter(priv->mux, 0, 0, 0);
+}
+
+static int max96714_init_tx_port(struct max96714_priv *priv)
+{
+	struct v4l2_mbus_config_mipi_csi2 *mipi;
+	unsigned long lanes_used = 0;
+	unsigned int val, lane;
+	int ret;
+
+	ret = max96714_disable_tx_port(priv);
+
+	mipi = &priv->mipi_csi2;
+	val = div_u64(priv->tx_link_freq * 2, MHZ(100));
+
+	cci_update_bits(priv->regmap, MAX96714_BACKTOP25,
+			CSI_DPLL_FREQ_MASK, val, &ret);
+
+	val = FIELD_PREP(MAX96714_CSI2_LANE_CNT_MASK, mipi->num_data_lanes - 1);
+	cci_update_bits(priv->regmap, MAX96714_MIPI_LANE_CNT,
+			MAX96714_CSI2_LANE_CNT_MASK, val, &ret);
+
+	/* lanes polarity */
+	val = 0;
+	for (lane = 0; lane < mipi->num_data_lanes + 1; lane++) {
+		if (!mipi->lane_polarities[lane])
+			continue;
+		if (lane == 0)
+			/* clock lane */
+			val |= BIT(5);
+		else if (lane < 3)
+			/* Lane D0 and D1 */
+			val |= BIT(lane - 1);
+		else
+			/* D2 and D3 */
+			val |= BIT(lane);
+	}
+
+	cci_update_bits(priv->regmap, MAX96714_MIPI_POLARITY,
+			MAX96714_MIPI_POLARITY_MASK, val, &ret);
+
+	/* lanes mapping */
+	val = 0;
+	for (lane = 0; lane < mipi->num_data_lanes; lane++) {
+		val |= (mipi->data_lanes[lane] - 1) << (lane * 2);
+		lanes_used |= BIT(mipi->data_lanes[lane] - 1);
+	}
+
+	/* Unused lanes need to be mapped as well to not have
+	 * the same lanes mapped twice.
+	 */
+	for (; lane < 4; lane++) {
+		unsigned int idx = find_first_zero_bit(&lanes_used, 4);
+
+		val |= idx << (lane * 2);
+		lanes_used |= BIT(idx);
+	}
+
+	return cci_write(priv->regmap, MAX96714_MIPI_LANE_MAP, val, &ret);
+}
+
+static int max96714_rxport_enable_poc(struct max96714_priv *priv)
+{
+	struct max96714_rxport *rxport = &priv->rxport;
+
+	if (!rxport->poc)
+		return 0;
+
+	return regulator_enable(rxport->poc);
+}
+
+static int max96714_rxport_disable_poc(struct max96714_priv *priv)
+{
+	struct max96714_rxport *rxport = &priv->rxport;
+
+	if (!rxport->poc)
+		return 0;
+
+	return regulator_disable(rxport->poc);
+}
+
+static int max96714_parse_dt_txport(struct max96714_priv *priv)
+{
+	struct device *dev = &priv->client->dev;
+	struct v4l2_fwnode_endpoint vep = {
+		.bus_type = V4L2_MBUS_CSI2_DPHY
+	};
+	struct fwnode_handle *ep_fwnode;
+	u32 num_data_lanes;
+	int ret;
+
+	ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev),
+						    MAX96714_PAD_SOURCE, 0, 0);
+	if (!ep_fwnode)
+		return -EINVAL;
+
+	ret = v4l2_fwnode_endpoint_alloc_parse(ep_fwnode, &vep);
+	fwnode_handle_put(ep_fwnode);
+	if (ret) {
+		dev_err(dev, "tx: failed to parse endpoint data\n");
+		return -EINVAL;
+	}
+
+	if (vep.nr_of_link_frequencies != 1) {
+		ret = -EINVAL;
+		goto err_free_vep;
+	}
+
+	priv->tx_link_freq = vep.link_frequencies[0];
+	/* Min 50MHz, Max 1250MHz, 50MHz step */
+	if (priv->tx_link_freq < MHZ(50) || priv->tx_link_freq > MHZ(1250) ||
+	    (u32)priv->tx_link_freq % MHZ(50)) {
+		dev_err(dev, "tx: invalid link frequency\n");
+		ret = -EINVAL;
+		goto err_free_vep;
+	}
+
+	num_data_lanes = vep.bus.mipi_csi2.num_data_lanes;
+	if (num_data_lanes < 1 || num_data_lanes > 4) {
+		dev_err(dev,
+			"tx: invalid number of data lanes must be 1 to 4\n");
+		ret = -EINVAL;
+		goto err_free_vep;
+	}
+
+	memcpy(&priv->mipi_csi2, &vep.bus.mipi_csi2, sizeof(priv->mipi_csi2));
+
+err_free_vep:
+	v4l2_fwnode_endpoint_free(&vep);
+
+	return ret;
+};
+
+static int max96714_parse_dt_rxport(struct max96714_priv *priv)
+{
+	static const char *poc_name = "port0-poc";
+	struct max96714_rxport *rxport = &priv->rxport;
+	struct device *dev = &priv->client->dev;
+	struct fwnode_handle *ep_fwnode;
+	int ret;
+
+	ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev),
+						    MAX96714_PAD_SINK, 0, 0);
+	if (!ep_fwnode)
+		return -ENOENT;
+
+	rxport->source.ep_fwnode = fwnode_graph_get_remote_endpoint(ep_fwnode);
+	fwnode_handle_put(ep_fwnode);
+
+	if (!rxport->source.ep_fwnode) {
+		dev_err(dev, "rx: no remote endpoint\n");
+		return -EINVAL;
+	}
+
+	rxport->poc = devm_regulator_get_optional(dev, poc_name);
+	if (IS_ERR(rxport->poc)) {
+		ret = PTR_ERR(rxport->poc);
+		if (ret == -ENODEV) {
+			rxport->poc = NULL;
+		} else {
+			dev_err(dev, "rx: failed to get POC supply: %d\n", ret);
+			goto err_put_source_ep_fwnode;
+		}
+	}
+
+	return 0;
+
+err_put_source_ep_fwnode:
+	fwnode_handle_put(rxport->source.ep_fwnode);
+	return ret;
+}
+
+static int max96714_parse_dt(struct max96714_priv *priv)
+{
+	int ret;
+
+	ret = max96714_parse_dt_txport(priv);
+	if (ret)
+		return ret;
+
+	ret = max96714_parse_dt_rxport(priv);
+	/* The deserializer can create a test pattern even if the
+	 * rx port is not connected to a serializer.
+	 */
+	if (ret && ret == -ENOENT)
+		ret = 0;
+
+	return ret;
+}
+
+static int max96714_enable_core_hw(struct max96714_priv *priv)
+{
+	struct device *dev = &priv->client->dev;
+	u64 val;
+	int ret;
+
+	if (priv->pd_gpio) {
+		/* wait min 2 ms for reset to complete */
+		gpiod_set_value_cansleep(priv->pd_gpio, 1);
+		fsleep(2000);
+		gpiod_set_value_cansleep(priv->pd_gpio, 0);
+		/* wait min 2 ms for power up to finish */
+		fsleep(2000);
+	}
+
+	ret = cci_read(priv->regmap, MAX96714_REG13, &val, NULL);
+	if (ret) {
+		dev_err_probe(dev, ret, "Cannot read first register, abort\n");
+		goto err_pd_gpio;
+	}
+
+	if (val != MAX96714F_DEVICE_ID) {
+		dev_err(dev, "Unsupported device id expected %x got %x\n",
+			MAX96714F_DEVICE_ID, (u8)val);
+		ret = -EOPNOTSUPP;
+		goto err_pd_gpio;
+	}
+
+	ret = cci_read(priv->regmap, MAX96714_DEV_REV, &val, NULL);
+	if (ret)
+		goto err_pd_gpio;
+
+	dev_dbg(dev, "Found %x (rev %lx)\n", MAX96714F_DEVICE_ID,
+		(u8)val & MAX96714_DEV_REV_MASK);
+
+	ret = cci_read(priv->regmap, MAX96714_MIPI_TX52, &val, NULL);
+	if (ret)
+		goto err_pd_gpio;
+
+	if (!(val & MAX96714_TUN_EN)) {
+		dev_err(dev, "Only supporting tunnel mode");
+		ret = -EOPNOTSUPP;
+		goto err_pd_gpio;
+	}
+
+	return 0;
+
+err_pd_gpio:
+	gpiod_set_value_cansleep(priv->pd_gpio, 1);
+	return ret;
+}
+
+static void max96714_disable_core_hw(struct max96714_priv *priv)
+{
+	gpiod_set_value_cansleep(priv->pd_gpio, 1);
+}
+
+static int max96714_get_hw_resources(struct max96714_priv *priv)
+{
+	struct device *dev = &priv->client->dev;
+
+	priv->regmap = devm_cci_regmap_init_i2c(priv->client, 16);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->pd_gpio =
+		devm_gpiod_get_optional(dev, "powerdown", GPIOD_OUT_HIGH);
+	if (IS_ERR(priv->pd_gpio))
+		return dev_err_probe(dev, PTR_ERR(priv->pd_gpio),
+				     "Cannot get powerdown GPIO\n");
+	return 0;
+}
+
+static int max96714_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct max96714_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->client = client;
+
+	ret = max96714_get_hw_resources(priv);
+	if (ret)
+		return ret;
+
+	ret = max96714_enable_core_hw(priv);
+	if (ret)
+		return ret;
+
+	ret = max96714_parse_dt(priv);
+	if (ret)
+		goto err_disable_core_hw;
+
+	max96714_init_tx_port(priv);
+
+	ret = max96714_rxport_enable_poc(priv);
+	if (ret)
+		goto err_free_ports;
+
+	ret = max96714_i2c_mux_init(priv);
+	if (ret)
+		goto err_disable_poc;
+
+	ret = max96714_create_subdev(priv);
+	if (ret)
+		goto err_del_mux;
+
+	return 0;
+
+err_del_mux:
+	i2c_mux_del_adapters(priv->mux);
+err_disable_poc:
+	max96714_rxport_disable_poc(priv);
+err_free_ports:
+	fwnode_handle_put(priv->rxport.source.ep_fwnode);
+err_disable_core_hw:
+	max96714_disable_core_hw(priv);
+
+	return ret;
+}
+
+static void max96714_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct max96714_priv *priv = sd_to_max96714(sd);
+
+	max96714_destroy_subdev(priv);
+	i2c_mux_del_adapters(priv->mux);
+	max96714_rxport_disable_poc(priv);
+	fwnode_handle_put(priv->rxport.source.ep_fwnode);
+	max96714_disable_core_hw(priv);
+	gpiod_set_value_cansleep(priv->pd_gpio, 1);
+}
+
+static const struct of_device_id max96714_of_ids[] = {
+	{ .compatible = "maxim,max96714f" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max96714_of_ids);
+
+static struct i2c_driver max96714_i2c_driver = {
+	.driver	= {
+		.name		= "max96714",
+		.of_match_table	= max96714_of_ids,
+	},
+	.probe		= max96714_probe,
+	.remove		= max96714_remove,
+};
+
+module_i2c_driver(max96714_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Maxim Integrated GMSL2 Deserializers Driver");
+MODULE_AUTHOR("Julien Massot <julien.massot@collabora.com>");
-- 
2.44.0


^ permalink raw reply related	[flat|nested] 11+ messages in thread

* Re: [PATCH v4 2/4] dt-bindings: media: add Maxim MAX96714 GMSL2 Deserializer
  2024-03-05 15:26 ` [PATCH v4 2/4] dt-bindings: media: add Maxim MAX96714 GMSL2 Deserializer Julien Massot
@ 2024-03-07 19:21   ` Conor Dooley
  2024-03-08 14:08     ` Julien Massot
  0 siblings, 1 reply; 11+ messages in thread
From: Conor Dooley @ 2024-03-07 19:21 UTC (permalink / raw)
  To: Julien Massot
  Cc: linux-media, kernel, devicetree, linux-kernel, mchehab, robh+dt,
	krzysztof.kozlowski+dt, conor+dt, sakari.ailus

[-- Attachment #1: Type: text/plain, Size: 1479 bytes --]

On Tue, Mar 05, 2024 at 04:26:06PM +0100, Julien Massot wrote:
> Add DT bindings for Maxim MAX96714 GMSL2 Deserializer.
> 
> Signed-off-by: Julien Massot <julien.massot@collabora.com>
> ---
> Change since v3:
>  - Renamed file to maxim,max96714.yaml dropped the 'f' suffix

Why? The filename should match the compatible, which /does/ have an f.

>  - Removed mention to C-PHY since it's not supported by MAX96714 deserializers
>  - Removed bus-type requirement on CSI endpoint since the device only support D-PHY
>  - Removed the clock-lanes property in the dt example
> 
> Change since v2:
>  - remove reg description
>  - rename enable gpio to powerdown
>  - use generic node name: i2c, serializer, deserializer
> ---
> ---
>  .../bindings/media/i2c/maxim,max96714.yaml    | 169 ++++++++++++++++++
>  1 file changed, 169 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max96714.yaml

> +properties:
> +  compatible:
> +    const: maxim,max96714f

> +  i2c-gate:
> +    $ref: /schemas/i2c/i2c-controller.yaml

There is an i2c-gate binding, you should reference it here instead.

> +    unevaluatedProperties: false
> +    description: |

This | is not needed, there's no formatting to preserve.

> +      The MAX96714 will pass through and forward the I2C requests from the
> +      incoming I2C bus over the GMSL2 link. Therefore it supports an i2c-gate
> +      subnode to configure a serializer.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v4 1/4] dt-bindings: media: add Maxim MAX96717 GMSL2 Serializer
  2024-03-05 15:26 ` [PATCH v4 1/4] dt-bindings: media: add Maxim MAX96717 GMSL2 Serializer Julien Massot
@ 2024-03-07 19:22   ` Conor Dooley
  0 siblings, 0 replies; 11+ messages in thread
From: Conor Dooley @ 2024-03-07 19:22 UTC (permalink / raw)
  To: Julien Massot
  Cc: linux-media, kernel, devicetree, linux-kernel, mchehab, robh+dt,
	krzysztof.kozlowski+dt, conor+dt, sakari.ailus

[-- Attachment #1: Type: text/plain, Size: 303 bytes --]

On Tue, Mar 05, 2024 at 04:26:05PM +0100, Julien Massot wrote:
> Add DT bindings for Maxim MAX96717 GMSL2 Serializer.
> 
> Signed-off-by: Julien Massot <julien.massot@collabora.com>
> ---
> Change since v3:
>  - Renamed file to maxim,max96717.yaml dropped the 'f' suffix

Same comments here :)

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v4 2/4] dt-bindings: media: add Maxim MAX96714 GMSL2 Deserializer
  2024-03-07 19:21   ` Conor Dooley
@ 2024-03-08 14:08     ` Julien Massot
  2024-03-08 15:07       ` Conor Dooley
  0 siblings, 1 reply; 11+ messages in thread
From: Julien Massot @ 2024-03-08 14:08 UTC (permalink / raw)
  To: Conor Dooley
  Cc: linux-media, kernel, devicetree, linux-kernel, mchehab, robh+dt,
	krzysztof.kozlowski+dt, conor+dt, sakari.ailus

Hi Conor,

Thanks for reviewing my patchset.

On 3/7/24 20:21, Conor Dooley wrote:
> On Tue, Mar 05, 2024 at 04:26:06PM +0100, Julien Massot wrote:
>> Add DT bindings for Maxim MAX96714 GMSL2 Deserializer.
>>
>> Signed-off-by: Julien Massot <julien.massot@collabora.com>
>> ---
>> Change since v3:
>>   - Renamed file to maxim,max96714.yaml dropped the 'f' suffix
> 
> Why? The filename should match the compatible, which /does/ have an f.
All the work has been done on MAX96714F variant of this Maxim GMSL2 
deserializer.
The driver and the binding remain suitable for all variants of this 
chipset, since they share the same
register mapping, similar features etc..

MAX96714 exists in different variant: MAX96714 / MAX96714F / MAX96714K 
that will be easy
to add support for this binding and driver later.

The MAX96714 name looks the most suitable.
Please have a look at this discussion on the V3 version
https://lore.kernel.org/lkml/ZdXYpc2csVnhtZH9@valkosipuli.retiisi.eu

> 
>>   - Removed mention to C-PHY since it's not supported by MAX96714 deserializers
>>   - Removed bus-type requirement on CSI endpoint since the device only support D-PHY
>>   - Removed the clock-lanes property in the dt example
>>
>> Change since v2:
>>   - remove reg description
>>   - rename enable gpio to powerdown
>>   - use generic node name: i2c, serializer, deserializer
>> ---
>> ---
>>   .../bindings/media/i2c/maxim,max96714.yaml    | 169 ++++++++++++++++++
>>   1 file changed, 169 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max96714.yaml
> 
>> +properties:
>> +  compatible:
>> +    const: maxim,max96714f
> 
>> +  i2c-gate:
>> +    $ref: /schemas/i2c/i2c-controller.yaml
> 
> There is an i2c-gate binding, you should reference it here instead.
Ok, I will post a new version with a reference to the i2c-gate binding.

> 
>> +    unevaluatedProperties: false
>> +    description: |
> 
> This | is not needed, there's no formatting to preserve.
Ok I will drop the '|'
> 
>> +      The MAX96714 will pass through and forward the I2C requests from the
>> +      incoming I2C bus over the GMSL2 link. Therefore it supports an i2c-gate
>> +      subnode to configure a serializer.

Regards,
-- 
Julien Massot
Senior Software Engineer
Collabora Ltd.
Platinum Building, St John's Innovation Park, Cambridge CB4 0DS, UK
Registered in England & Wales, no. 5513718

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v4 2/4] dt-bindings: media: add Maxim MAX96714 GMSL2 Deserializer
  2024-03-08 14:08     ` Julien Massot
@ 2024-03-08 15:07       ` Conor Dooley
  2024-03-08 15:48         ` Julien Massot
  0 siblings, 1 reply; 11+ messages in thread
From: Conor Dooley @ 2024-03-08 15:07 UTC (permalink / raw)
  To: Julien Massot
  Cc: linux-media, kernel, devicetree, linux-kernel, mchehab, robh+dt,
	krzysztof.kozlowski+dt, conor+dt, sakari.ailus

[-- Attachment #1: Type: text/plain, Size: 1424 bytes --]

On Fri, Mar 08, 2024 at 03:08:12PM +0100, Julien Massot wrote:
> On 3/7/24 20:21, Conor Dooley wrote:
> > On Tue, Mar 05, 2024 at 04:26:06PM +0100, Julien Massot wrote:
> > > Add DT bindings for Maxim MAX96714 GMSL2 Deserializer.
> > > 
> > > Signed-off-by: Julien Massot <julien.massot@collabora.com>
> > > ---
> > > Change since v3:
> > >   - Renamed file to maxim,max96714.yaml dropped the 'f' suffix
> > 
> > Why? The filename should match the compatible, which /does/ have an f.
> All the work has been done on MAX96714F variant of this Maxim GMSL2
> deserializer.
> The driver and the binding remain suitable for all variants of this chipset,
> since they share the same
> register mapping, similar features etc..
> 
> MAX96714 exists in different variant: MAX96714 / MAX96714F / MAX96714K that
> will be easy
> to add support for this binding and driver later.

Either document the non-f version if it really is that similar, using
all of the same properties, or name the file after the version you've
actually documented. I don't see why this particular case should be
given an exception to how bindings are named.

What is the actual difference between the f and non f versions? Is it
visible to software?

> The MAX96714 name looks the most suitable.
> Please have a look at this discussion on the V3 version
> https://lore.kernel.org/lkml/ZdXYpc2csVnhtZH9@valkosipuli.retiisi.eu


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v4 2/4] dt-bindings: media: add Maxim MAX96714 GMSL2 Deserializer
  2024-03-08 15:07       ` Conor Dooley
@ 2024-03-08 15:48         ` Julien Massot
  2024-03-08 16:50           ` Conor Dooley
  0 siblings, 1 reply; 11+ messages in thread
From: Julien Massot @ 2024-03-08 15:48 UTC (permalink / raw)
  To: Conor Dooley
  Cc: linux-media, kernel, devicetree, linux-kernel, mchehab, robh+dt,
	krzysztof.kozlowski+dt, conor+dt, sakari.ailus



On 3/8/24 16:07, Conor Dooley wrote:
> On Fri, Mar 08, 2024 at 03:08:12PM +0100, Julien Massot wrote:
>> On 3/7/24 20:21, Conor Dooley wrote:
>>> On Tue, Mar 05, 2024 at 04:26:06PM +0100, Julien Massot wrote:
>>>> Add DT bindings for Maxim MAX96714 GMSL2 Deserializer.
>>>>
>>>> Signed-off-by: Julien Massot <julien.massot@collabora.com>
>>>> ---
>>>> Change since v3:
>>>>    - Renamed file to maxim,max96714.yaml dropped the 'f' suffix
>>>
>>> Why? The filename should match the compatible, which /does/ have an f.
>> All the work has been done on MAX96714F variant of this Maxim GMSL2
>> deserializer.
>> The driver and the binding remain suitable for all variants of this chipset,
>> since they share the same
>> register mapping, similar features etc..
>>
>> MAX96714 exists in different variant: MAX96714 / MAX96714F / MAX96714K that
>> will be easy
>> to add support for this binding and driver later.
> 
> Either document the non-f version if it really is that similar, using
> all of the same properties, or name the file after the version you've
> actually documented. I don't see why this particular case should be
> given an exception to how bindings are named.
> 
> What is the actual difference between the f and non f versions? Is it
> visible to software?

Yes there are a few differences visible to the software, for example the 
GMSL
link rate since MAX96714 support 6 and 3 Gbps, while MAX96714F only 
supports 3Gbps.
the registers map is the same, but a few values are not possible with 
the 'f' version.

I will add a compatible for the non 'f' version, and will do the same 
for the max96717 binding.

-- 
Julien Massot
Senior Software Engineer
Collabora Ltd.
Platinum Building, St John's Innovation Park, Cambridge CB4 0DS, UK
Registered in England & Wales, no. 5513718

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v4 2/4] dt-bindings: media: add Maxim MAX96714 GMSL2 Deserializer
  2024-03-08 15:48         ` Julien Massot
@ 2024-03-08 16:50           ` Conor Dooley
  0 siblings, 0 replies; 11+ messages in thread
From: Conor Dooley @ 2024-03-08 16:50 UTC (permalink / raw)
  To: Julien Massot
  Cc: linux-media, kernel, devicetree, linux-kernel, mchehab, robh+dt,
	krzysztof.kozlowski+dt, conor+dt, sakari.ailus

[-- Attachment #1: Type: text/plain, Size: 2064 bytes --]

On Fri, Mar 08, 2024 at 04:48:16PM +0100, Julien Massot wrote:
> 
> 
> On 3/8/24 16:07, Conor Dooley wrote:
> > On Fri, Mar 08, 2024 at 03:08:12PM +0100, Julien Massot wrote:
> > > On 3/7/24 20:21, Conor Dooley wrote:
> > > > On Tue, Mar 05, 2024 at 04:26:06PM +0100, Julien Massot wrote:
> > > > > Add DT bindings for Maxim MAX96714 GMSL2 Deserializer.
> > > > > 
> > > > > Signed-off-by: Julien Massot <julien.massot@collabora.com>
> > > > > ---
> > > > > Change since v3:
> > > > >    - Renamed file to maxim,max96714.yaml dropped the 'f' suffix
> > > > 
> > > > Why? The filename should match the compatible, which /does/ have an f.
> > > All the work has been done on MAX96714F variant of this Maxim GMSL2
> > > deserializer.
> > > The driver and the binding remain suitable for all variants of this chipset,
> > > since they share the same
> > > register mapping, similar features etc..
> > > 
> > > MAX96714 exists in different variant: MAX96714 / MAX96714F / MAX96714K that
> > > will be easy
> > > to add support for this binding and driver later.
> > 
> > Either document the non-f version if it really is that similar, using
> > all of the same properties, or name the file after the version you've
> > actually documented. I don't see why this particular case should be
> > given an exception to how bindings are named.
> > 
> > What is the actual difference between the f and non f versions? Is it
> > visible to software?
> 
> Yes there are a few differences visible to the software, for example the
> GMSL
> link rate since MAX96714 support 6 and 3 Gbps, while MAX96714F only supports
> 3Gbps.
> the registers map is the same, but a few values are not possible with the
> 'f' version.
> 
> I will add a compatible for the non 'f' version, and will do the same for
> the max96717 binding.

It's not immediately clear if that means that the f version should be a
fallback for the non-f version, but sounds like it could be if the
difference is purely that there's a reduced set of link rates or
similar.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2024-03-08 16:50 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-03-05 15:26 [PATCH v4 0/4] Add support for MAX96714F and MAX96717F GMSL2 ser/des Julien Massot
2024-03-05 15:26 ` [PATCH v4 1/4] dt-bindings: media: add Maxim MAX96717 GMSL2 Serializer Julien Massot
2024-03-07 19:22   ` Conor Dooley
2024-03-05 15:26 ` [PATCH v4 2/4] dt-bindings: media: add Maxim MAX96714 GMSL2 Deserializer Julien Massot
2024-03-07 19:21   ` Conor Dooley
2024-03-08 14:08     ` Julien Massot
2024-03-08 15:07       ` Conor Dooley
2024-03-08 15:48         ` Julien Massot
2024-03-08 16:50           ` Conor Dooley
2024-03-05 15:26 ` [PATCH v4 3/4] media: i2c: add MAX96717 driver Julien Massot
2024-03-05 15:26 ` [PATCH v4 4/4] media: i2c: add MAX96714 driver Julien Massot

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).