* [PATCH 40/62] gpio: gpio-siox: Use new GPIO_LINE_DIRECTION
[not found] <cover.1572945896.git.matti.vaittinen@fi.rohmeurope.com>
@ 2019-11-05 10:30 ` Matti Vaittinen
2019-11-11 7:27 ` Thorsten Scherer
0 siblings, 1 reply; 6+ messages in thread
From: Matti Vaittinen @ 2019-11-05 10:30 UTC (permalink / raw)
To: matti.vaittinen, mazziesaccount
Cc: Thorsten Scherer, Uwe Kleine-König, Pengutronix Kernel Team,
Linus Walleij, Bartosz Golaszewski, linux-gpio, linux-kernel
It's hard for occasional GPIO code reader/writer to know if values 0/1
equal to IN or OUT. Use defined GPIO_LINE_DIRECTION_IN and
GPIO_LINE_DIRECTION_OUT to help them out.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---
drivers/gpio/gpio-siox.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpio/gpio-siox.c b/drivers/gpio/gpio-siox.c
index 006a7e6a75f2..311f66757b92 100644
--- a/drivers/gpio/gpio-siox.c
+++ b/drivers/gpio/gpio-siox.c
@@ -203,9 +203,9 @@ static int gpio_siox_direction_output(struct gpio_chip *chip,
static int gpio_siox_get_direction(struct gpio_chip *chip, unsigned int offset)
{
if (offset < 12)
- return 1; /* input */
+ return GPIO_LINE_DIRECTION_IN;
else
- return 0; /* output */
+ return GPIO_LINE_DIRECTION_OUT;
}
static int gpio_siox_probe(struct siox_device *sdevice)
--
2.21.0
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 40/62] gpio: gpio-siox: Use new GPIO_LINE_DIRECTION
2019-11-05 10:30 ` [PATCH 40/62] gpio: gpio-siox: Use new GPIO_LINE_DIRECTION Matti Vaittinen
@ 2019-11-11 7:27 ` Thorsten Scherer
2019-11-11 7:43 ` Vaittinen, Matti
0 siblings, 1 reply; 6+ messages in thread
From: Thorsten Scherer @ 2019-11-11 7:27 UTC (permalink / raw)
To: Matti Vaittinen
Cc: mazziesaccount, Uwe Kleine-König, Pengutronix Kernel Team,
Linus Walleij, Bartosz Golaszewski, linux-gpio, linux-kernel
Hello,
On Tue, Nov 05, 2019 at 12:30:58PM +0200, Matti Vaittinen wrote:
> It's hard for occasional GPIO code reader/writer to know if values 0/1
> equal to IN or OUT. Use defined GPIO_LINE_DIRECTION_IN and
> GPIO_LINE_DIRECTION_OUT to help them out.
>
> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
for SIOX gpio:
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de>
> ---
> drivers/gpio/gpio-siox.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpio/gpio-siox.c b/drivers/gpio/gpio-siox.c
> index 006a7e6a75f2..311f66757b92 100644
> --- a/drivers/gpio/gpio-siox.c
> +++ b/drivers/gpio/gpio-siox.c
> @@ -203,9 +203,9 @@ static int gpio_siox_direction_output(struct gpio_chip *chip,
> static int gpio_siox_get_direction(struct gpio_chip *chip, unsigned int offset)
> {
> if (offset < 12)
> - return 1; /* input */
> + return GPIO_LINE_DIRECTION_IN;
> else
> - return 0; /* output */
> + return GPIO_LINE_DIRECTION_OUT;
> }
>
> static int gpio_siox_probe(struct siox_device *sdevice)
> --
> 2.21.0
>
> Quoted from
> [PATCH 00/62] Add definition for GPIO direction
> <cover.1572875541.git.matti.vaittinen@fi.rohmeurope.com>
>
> Patches are compile-tested only. I have no HW to really test them. Thus
> I'd appreciate carefull review. This work is mainly about converting
> zeros and ones to the new defines but it wouldn't be first time I
> get it wrong in one of the patches :)
Applied the patch(es) and tested them with SIOX device
Tested-by: Thorsten Scherer <t.scherer@eckelmann.de>
>
> --
> Matti Vaittinen, Linux device drivers
> ROHM Semiconductors, Finland SWDC
> Kiviharjunlenkki 1E
> 90220 OULU
> FINLAND
>
> ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
> Simon says - in Latin please.
> ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
> Thanks to Simon Glass for the translation =]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 40/62] gpio: gpio-siox: Use new GPIO_LINE_DIRECTION
2019-11-11 7:27 ` Thorsten Scherer
@ 2019-11-11 7:43 ` Vaittinen, Matti
2019-11-11 10:42 ` Uwe Kleine-König
0 siblings, 1 reply; 6+ messages in thread
From: Vaittinen, Matti @ 2019-11-11 7:43 UTC (permalink / raw)
To: thorsten.scherer
Cc: mazziesaccount, kernel, bgolaszewski, linux-gpio,
u.kleine-koenig, linus.walleij, linux-kernel
Hello Thorsten,
On Mon, 2019-11-11 at 08:27 +0100, Thorsten Scherer wrote:
> Hello,
>
> On Tue, Nov 05, 2019 at 12:30:58PM +0200, Matti Vaittinen wrote:
> > It's hard for occasional GPIO code reader/writer to know if values
> > 0/1
> > equal to IN or OUT. Use defined GPIO_LINE_DIRECTION_IN and
> > GPIO_LINE_DIRECTION_OUT to help them out.
> >
> > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
>
> for SIOX gpio:
>
> Acked-by: Thorsten Scherer <t.scherer@eckelmann.de>
>
> > Patches are compile-tested only. I have no HW to really test
> > them. Thus
> > I'd appreciate carefull review. This work is mainly about
> > converting
> > zeros and ones to the new defines but it wouldn't be first time I
> > get it wrong in one of the patches
> > :)
>
> Applied the patch(es) and tested them with SIOX device
>
> Tested-by: Thorsten Scherer <t.scherer@eckelmann.de>
>
Big thanks! It's _really_ nice that someone takes the time to do the
testing! Highly appreciated! :]
Br,
Matti Vaittinen
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 40/62] gpio: gpio-siox: Use new GPIO_LINE_DIRECTION
2019-11-11 7:43 ` Vaittinen, Matti
@ 2019-11-11 10:42 ` Uwe Kleine-König
2019-11-13 8:46 ` Matti Vaittinen
0 siblings, 1 reply; 6+ messages in thread
From: Uwe Kleine-König @ 2019-11-11 10:42 UTC (permalink / raw)
To: Vaittinen, Matti
Cc: thorsten.scherer, linux-gpio, linus.walleij, mazziesaccount,
linux-kernel, bgolaszewski, kernel
Hello Matti,
On Mon, Nov 11, 2019 at 07:43:50AM +0000, Vaittinen, Matti wrote:
> On Mon, 2019-11-11 at 08:27 +0100, Thorsten Scherer wrote:
> > Hello,
> >
> > On Tue, Nov 05, 2019 at 12:30:58PM +0200, Matti Vaittinen wrote:
> > > It's hard for occasional GPIO code reader/writer to know if values
> > > 0/1
> > > equal to IN or OUT. Use defined GPIO_LINE_DIRECTION_IN and
> > > GPIO_LINE_DIRECTION_OUT to help them out.
> > >
> > > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> >
> > for SIOX gpio:
> >
> > Acked-by: Thorsten Scherer <t.scherer@eckelmann.de>
> >
> > > Patches are compile-tested only. I have no HW to really test
> > > them. Thus
> > > I'd appreciate carefull review. This work is mainly about
> > > converting
> > > zeros and ones to the new defines but it wouldn't be first time I
> > > get it wrong in one of the patches
> > > :)
> >
> > Applied the patch(es) and tested them with SIOX device
> >
> > Tested-by: Thorsten Scherer <t.scherer@eckelmann.de>
>
> Big thanks! It's _really_ nice that someone takes the time to do the
> testing! Highly appreciated! :]
without wanting to devalue Thorsten's testing, I think testing your
series can be trivially done without a runtime check as your patches
won't change the compiled result. So just compile once without the patch
and once with and compare the results. If they are bit-by-bit identical
everything is fine.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 40/62] gpio: gpio-siox: Use new GPIO_LINE_DIRECTION
2019-11-11 10:42 ` Uwe Kleine-König
@ 2019-11-13 8:46 ` Matti Vaittinen
2019-11-13 9:09 ` Uwe Kleine-König
0 siblings, 1 reply; 6+ messages in thread
From: Matti Vaittinen @ 2019-11-13 8:46 UTC (permalink / raw)
To: Uwe Kleine-König
Cc: thorsten.scherer, linux-gpio, linus.walleij, mazziesaccount,
linux-kernel, bgolaszewski, kernel
On Mon, Nov 11, 2019 at 11:42:52AM +0100, Uwe Kleine-König wrote:
> Hello Matti,
>
> On Mon, Nov 11, 2019 at 07:43:50AM +0000, Vaittinen, Matti wrote:
> > On Mon, 2019-11-11 at 08:27 +0100, Thorsten Scherer wrote:
> > > Hello,
> > >
> > > On Tue, Nov 05, 2019 at 12:30:58PM +0200, Matti Vaittinen wrote:
> > > > It's hard for occasional GPIO code reader/writer to know if values
> > > > 0/1
> > > > equal to IN or OUT. Use defined GPIO_LINE_DIRECTION_IN and
> > > > GPIO_LINE_DIRECTION_OUT to help them out.
> > > >
> > > > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> > >
> > > for SIOX gpio:
> > >
> > > Acked-by: Thorsten Scherer <t.scherer@eckelmann.de>
> > >
> > > > Patches are compile-tested only. I have no HW to really test
> > > > them. Thus
> > > > I'd appreciate carefull review. This work is mainly about
> > > > converting
> > > > zeros and ones to the new defines but it wouldn't be first time I
> > > > get it wrong in one of the patches
> > > > :)
> > >
> > > Applied the patch(es) and tested them with SIOX device
> > >
> > > Tested-by: Thorsten Scherer <t.scherer@eckelmann.de>
> >
> > Big thanks! It's _really_ nice that someone takes the time to do the
> > testing! Highly appreciated! :]
>
> without wanting to devalue Thorsten's testing, I think testing your
> series can be trivially done without a runtime check as your patches
> won't change the compiled result. So just compile once without the patch
> and once with and compare the results. If they are bit-by-bit identical
> everything is fine.
Right again Uwe. This is correct for most of the modules - assuming
there's no __LINE__ or time related macros used. Few of the modules did
get actual changes though.
Br,
Matti
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 40/62] gpio: gpio-siox: Use new GPIO_LINE_DIRECTION
2019-11-13 8:46 ` Matti Vaittinen
@ 2019-11-13 9:09 ` Uwe Kleine-König
0 siblings, 0 replies; 6+ messages in thread
From: Uwe Kleine-König @ 2019-11-13 9:09 UTC (permalink / raw)
To: Matti Vaittinen
Cc: thorsten.scherer, linux-gpio, linus.walleij, mazziesaccount,
linux-kernel, bgolaszewski, kernel
On Wed, Nov 13, 2019 at 10:46:37AM +0200, Matti Vaittinen wrote:
> On Mon, Nov 11, 2019 at 11:42:52AM +0100, Uwe Kleine-König wrote:
> > Hello Matti,
> >
> > On Mon, Nov 11, 2019 at 07:43:50AM +0000, Vaittinen, Matti wrote:
> > > On Mon, 2019-11-11 at 08:27 +0100, Thorsten Scherer wrote:
> > > > Hello,
> > > >
> > > > On Tue, Nov 05, 2019 at 12:30:58PM +0200, Matti Vaittinen wrote:
> > > > > It's hard for occasional GPIO code reader/writer to know if values
> > > > > 0/1
> > > > > equal to IN or OUT. Use defined GPIO_LINE_DIRECTION_IN and
> > > > > GPIO_LINE_DIRECTION_OUT to help them out.
> > > > >
> > > > > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> > > >
> > > > for SIOX gpio:
> > > >
> > > > Acked-by: Thorsten Scherer <t.scherer@eckelmann.de>
> > > >
> > > > > Patches are compile-tested only. I have no HW to really test
> > > > > them. Thus
> > > > > I'd appreciate carefull review. This work is mainly about
> > > > > converting
> > > > > zeros and ones to the new defines but it wouldn't be first time I
> > > > > get it wrong in one of the patches
> > > > > :)
> > > >
> > > > Applied the patch(es) and tested them with SIOX device
> > > >
> > > > Tested-by: Thorsten Scherer <t.scherer@eckelmann.de>
> > >
> > > Big thanks! It's _really_ nice that someone takes the time to do the
> > > testing! Highly appreciated! :]
> >
> > without wanting to devalue Thorsten's testing, I think testing your
> > series can be trivially done without a runtime check as your patches
> > won't change the compiled result. So just compile once without the patch
> > and once with and compare the results. If they are bit-by-bit identical
> > everything is fine.
>
> Right again Uwe. This is correct for most of the modules - assuming
> there's no __LINE__ or time related macros used. Few of the modules did
> get actual changes though.
So as you did this research, I think it's worth pointing this out in the
commit log. Either something like:
There are no changes in the compile result.
or
This results in changes to the compiled module because ...
(and probably ... is worth fixing).
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-11-13 9:09 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <cover.1572945896.git.matti.vaittinen@fi.rohmeurope.com>
2019-11-05 10:30 ` [PATCH 40/62] gpio: gpio-siox: Use new GPIO_LINE_DIRECTION Matti Vaittinen
2019-11-11 7:27 ` Thorsten Scherer
2019-11-11 7:43 ` Vaittinen, Matti
2019-11-11 10:42 ` Uwe Kleine-König
2019-11-13 8:46 ` Matti Vaittinen
2019-11-13 9:09 ` Uwe Kleine-König
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).