From: Shaohua Li <shli@fb.com>
To: <linux-block@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <kernel-team@fb.com>, <axboe@fb.com>, <tj@kernel.org>,
<vgoyal@redhat.com>
Subject: [PATCH V5 01/17] blk-throttle: use U64_MAX/UINT_MAX to replace -1
Date: Thu, 15 Dec 2016 12:32:52 -0800 [thread overview]
Message-ID: <92ac507820069ff539918830280bdf76a9bebed4.1481833017.git.shli@fb.com> (raw)
In-Reply-To: <cover.1481833017.git.shli@fb.com>
clean up the code to avoid using -1
Signed-off-by: Shaohua Li <shli@fb.com>
---
block/blk-throttle.c | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index a6bb4fe..e45bf50 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -334,10 +334,10 @@ static struct blkg_policy_data *throtl_pd_alloc(gfp_t gfp, int node)
}
RB_CLEAR_NODE(&tg->rb_node);
- tg->bps[READ] = -1;
- tg->bps[WRITE] = -1;
- tg->iops[READ] = -1;
- tg->iops[WRITE] = -1;
+ tg->bps[READ] = U64_MAX;
+ tg->bps[WRITE] = U64_MAX;
+ tg->iops[READ] = UINT_MAX;
+ tg->iops[WRITE] = UINT_MAX;
return &tg->pd;
}
@@ -380,7 +380,7 @@ static void tg_update_has_rules(struct throtl_grp *tg)
for (rw = READ; rw <= WRITE; rw++)
tg->has_rules[rw] = (parent_tg && parent_tg->has_rules[rw]) ||
- (tg->bps[rw] != -1 || tg->iops[rw] != -1);
+ (tg->bps[rw] != U64_MAX || tg->iops[rw] != UINT_MAX);
}
static void throtl_pd_online(struct blkg_policy_data *pd)
@@ -771,7 +771,7 @@ static bool tg_may_dispatch(struct throtl_grp *tg, struct bio *bio,
bio != throtl_peek_queued(&tg->service_queue.queued[rw]));
/* If tg->bps = -1, then BW is unlimited */
- if (tg->bps[rw] == -1 && tg->iops[rw] == -1) {
+ if (tg->bps[rw] == U64_MAX && tg->iops[rw] == UINT_MAX) {
if (wait)
*wait = 0;
return true;
@@ -1110,7 +1110,7 @@ static u64 tg_prfill_conf_u64(struct seq_file *sf, struct blkg_policy_data *pd,
struct throtl_grp *tg = pd_to_tg(pd);
u64 v = *(u64 *)((void *)tg + off);
- if (v == -1)
+ if (v == U64_MAX)
return 0;
return __blkg_prfill_u64(sf, pd, v);
}
@@ -1121,7 +1121,7 @@ static u64 tg_prfill_conf_uint(struct seq_file *sf, struct blkg_policy_data *pd,
struct throtl_grp *tg = pd_to_tg(pd);
unsigned int v = *(unsigned int *)((void *)tg + off);
- if (v == -1)
+ if (v == UINT_MAX)
return 0;
return __blkg_prfill_u64(sf, pd, v);
}
@@ -1195,7 +1195,7 @@ static ssize_t tg_set_conf(struct kernfs_open_file *of,
if (sscanf(ctx.body, "%llu", &v) != 1)
goto out_finish;
if (!v)
- v = -1;
+ v = U64_MAX;
tg = blkg_to_tg(ctx.blkg);
@@ -1270,17 +1270,17 @@ static u64 tg_prfill_max(struct seq_file *sf, struct blkg_policy_data *pd,
if (!dname)
return 0;
- if (tg->bps[READ] == -1 && tg->bps[WRITE] == -1 &&
- tg->iops[READ] == -1 && tg->iops[WRITE] == -1)
+ if (tg->bps[READ] == U64_MAX && tg->bps[WRITE] == U64_MAX &&
+ tg->iops[READ] == UINT_MAX && tg->iops[WRITE] == UINT_MAX)
return 0;
- if (tg->bps[READ] != -1)
+ if (tg->bps[READ] != U64_MAX)
snprintf(bufs[0], sizeof(bufs[0]), "%llu", tg->bps[READ]);
- if (tg->bps[WRITE] != -1)
+ if (tg->bps[WRITE] != U64_MAX)
snprintf(bufs[1], sizeof(bufs[1]), "%llu", tg->bps[WRITE]);
- if (tg->iops[READ] != -1)
+ if (tg->iops[READ] != UINT_MAX)
snprintf(bufs[2], sizeof(bufs[2]), "%u", tg->iops[READ]);
- if (tg->iops[WRITE] != -1)
+ if (tg->iops[WRITE] != UINT_MAX)
snprintf(bufs[3], sizeof(bufs[3]), "%u", tg->iops[WRITE]);
seq_printf(sf, "%s rbps=%s wbps=%s riops=%s wiops=%s\n",
@@ -1318,7 +1318,7 @@ static ssize_t tg_set_max(struct kernfs_open_file *of,
while (true) {
char tok[27]; /* wiops=18446744073709551616 */
char *p;
- u64 val = -1;
+ u64 val = U64_MAX;
int len;
if (sscanf(ctx.body, "%26s%n", tok, &len) != 1)
--
2.9.3
next prev parent reply other threads:[~2016-12-15 20:38 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-15 20:32 [PATCH V5 00/17] blk-throttle: add .low limit Shaohua Li
2016-12-15 20:32 ` Shaohua Li [this message]
2016-12-15 20:32 ` [PATCH V5 02/17] blk-throttle: prepare support multiple limits Shaohua Li
2016-12-15 20:32 ` [PATCH V5 03/17] blk-throttle: add .low interface Shaohua Li
2017-01-09 16:35 ` Tejun Heo
2016-12-15 20:32 ` [PATCH V5 04/17] blk-throttle: configure bps/iops limit for cgroup in low limit Shaohua Li
2017-01-09 17:35 ` Tejun Heo
2016-12-15 20:32 ` [PATCH V5 05/17] blk-throttle: add upgrade logic for LIMIT_LOW state Shaohua Li
2017-01-09 18:40 ` Tejun Heo
2017-01-09 19:46 ` Tejun Heo
2016-12-15 20:32 ` [PATCH V5 06/17] blk-throttle: add downgrade logic Shaohua Li
2016-12-15 20:32 ` [PATCH V5 07/17] blk-throttle: make sure expire time isn't too big Shaohua Li
2017-01-09 19:54 ` Tejun Heo
2016-12-15 20:32 ` [PATCH V5 08/17] blk-throttle: make throtl_slice tunable Shaohua Li
2017-01-09 20:08 ` Tejun Heo
2016-12-15 20:33 ` [PATCH V5 09/17] blk-throttle: detect completed idle cgroup Shaohua Li
2017-01-09 20:13 ` Tejun Heo
2016-12-15 20:33 ` [PATCH V5 10/17] blk-throttle: make bandwidth change smooth Shaohua Li
2017-01-09 20:28 ` Tejun Heo
2016-12-15 20:33 ` [PATCH V5 11/17] blk-throttle: add a simple idle detection Shaohua Li
2017-01-09 20:56 ` Tejun Heo
2016-12-15 20:33 ` [PATCH V5 12/17] blk-throttle: add interface to configure idle time threshold Shaohua Li
2017-01-09 20:58 ` Tejun Heo
2016-12-15 20:33 ` [PATCH V5 13/17] blk-throttle: ignore idle cgroup limit Shaohua Li
2017-01-09 21:01 ` Tejun Heo
2016-12-15 20:33 ` [PATCH V5 14/17] blk-throttle: add interface for per-cgroup target latency Shaohua Li
2017-01-09 21:14 ` Tejun Heo
2016-12-15 20:33 ` [PATCH V5 15/17] block: track request size in blk_issue_stat Shaohua Li
2016-12-16 2:01 ` kbuild test robot
2017-01-09 21:17 ` Tejun Heo
2016-12-15 20:33 ` [PATCH V5 16/17] blk-throttle: add a mechanism to estimate IO latency Shaohua Li
2017-01-09 21:39 ` Tejun Heo
2016-12-15 20:33 ` [PATCH V5 17/17] blk-throttle: add latency target support Shaohua Li
2017-01-09 21:46 ` [PATCH V5 00/17] blk-throttle: add .low limit Tejun Heo
2017-01-09 22:27 ` Shaohua Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=92ac507820069ff539918830280bdf76a9bebed4.1481833017.git.shli@fb.com \
--to=shli@fb.com \
--cc=axboe@fb.com \
--cc=kernel-team@fb.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tj@kernel.org \
--cc=vgoyal@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).