[PATCH 1/6] sh: sh7785lcr: add GPIO lookup table for i2c controller reset

[PATCH 1/6] sh: sh7785lcr: add GPIO lookup table for i2c controller reset

[Chris Packham]

Define the GPIO connected to the PCA9564 using a GPIO lookup table. This
will allow the i2c-pca-platform driver to use the device managed APIs to
lookup the gpio instead of using platform_data.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
 arch/sh/boards/board-sh7785lcr.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index 2c4771ee84cd..4c321d0da945 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -25,6 +25,7 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/errno.h>
+#include <linux/gpio/machine.h>
 #include <mach/sh7785lcr.h>
 #include <cpu/sh7785.h>
 #include <asm/heartbeat.h>
@@ -243,6 +244,14 @@ static struct resource i2c_resources[] = {
 	},
 };
 
+static struct gpiod_lookup_table i2c_gpio_table = {
+	.dev_id = "i2c.0",
+	.table = {
+		GPIO_LOOKUP("pfc-sh7757", 0, "reset-gpios", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
 	.gpio			= 0,
 	.i2c_clock_speed	= I2C_PCA_CON_330kHz,
@@ -283,6 +292,7 @@ static int __init sh7785lcr_devices_setup(void)
 		i2c_device.num_resources = ARRAY_SIZE(i2c_proto_resources);
 	}
 
+	gpiod_add_lookup(&i2c_gpio_table);
 	return platform_add_devices(sh7785lcr_devices,
 				    ARRAY_SIZE(sh7785lcr_devices));
 }
-- 
2.13.0

Re: [PATCH 1/6] sh: sh7785lcr: add GPIO lookup table for i2c controller reset

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1711 bytes --]

Hi Chris,

[auto build test ERROR on wsa/i2c/for-next]
[also build test ERROR on v4.12-rc7 next-20170630]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Chris-Packham/sh-sh7785lcr-add-GPIO-lookup-table-for-i2c-controller-reset/20170702-214426
base:   https://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/for-next
config: sh-sh7785lcr_32bit_defconfig (attached as .config)
compiler: sh4-linux-gnu-gcc (Debian 6.1.1-9) 6.1.1 20160705
reproduce:
        wget https://raw.githubusercontent.com/01org/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=sh 

All errors (new ones prefixed by >>):

   arch/sh/boards/board-sh7785lcr.c: In function 'sh7785lcr_devices_setup':
>> arch/sh/boards/board-sh7785lcr.c:295:2: error: implicit declaration of function 'gpiod_add_lookup' [-Werror=implicit-function-declaration]
     gpiod_add_lookup(&i2c_gpio_table);
     ^~~~~~~~~~~~~~~~
   cc1: some warnings being treated as errors

vim +/gpiod_add_lookup +295 arch/sh/boards/board-sh7785lcr.c

   289	
   290		if (mach_is_sh7785lcr_pt()) {
   291			i2c_device.resource = i2c_proto_resources;
   292			i2c_device.num_resources = ARRAY_SIZE(i2c_proto_resources);
   293		}
   294	
 > 295		gpiod_add_lookup(&i2c_gpio_table);
   296		return platform_add_devices(sh7785lcr_devices,
   297					    ARRAY_SIZE(sh7785lcr_devices));
   298	}

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 16934 bytes --]

Re: [PATCH 1/6] sh: sh7785lcr: add GPIO lookup table for i2c controller reset

[Geert Uytterhoeven]

Hi Chris,

On Sun, Jul 2, 2017 at 6:47 PM, kbuild test robot <lkp@intel.com> wrote:
> [auto build test ERROR on wsa/i2c/for-next]
> [also build test ERROR on v4.12-rc7 next-20170630]
> [if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
>
> url:    https://github.com/0day-ci/linux/commits/Chris-Packham/sh-sh7785lcr-add-GPIO-lookup-table-for-i2c-controller-reset/20170702-214426
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/for-next
> config: sh-sh7785lcr_32bit_defconfig (attached as .config)
> compiler: sh4-linux-gnu-gcc (Debian 6.1.1-9) 6.1.1 20160705
> reproduce:
>         wget https://raw.githubusercontent.com/01org/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>         chmod +x ~/bin/make.cross
>         # save the attached .config to linux build tree
>         make.cross ARCH=sh
>
> All errors (new ones prefixed by >>):
>
>    arch/sh/boards/board-sh7785lcr.c: In function 'sh7785lcr_devices_setup':
>>> arch/sh/boards/board-sh7785lcr.c:295:2: error: implicit declaration of function 'gpiod_add_lookup' [-Werror=implicit-function-declaration]
>      gpiod_add_lookup(&i2c_gpio_table);

It's called gpiod_add_lookup_table()

https://www.kernel.org/pub/tools/crosstool/ is your friend...

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH 2/6] i2c: pca-platform: correctly set algo_data.reset_chip

[Chris Packham]

When device tree support was added the setting of algo_data.reset_chip
was moved. There were two problems with this. The first being that
i2c_pca_pf_resetchip was only used if platform data was provided. The
second that it was unconditionally overridden with
i2c_pca_pf_dummyreset. Ensure that however the reset gpio is defined the
correct reset_chip function is used.

Fixes: commit 4cc7229daa46 ("i2c: pca-platform: switch to struct gpio_desc")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
 drivers/i2c/busses/i2c-pca-platform.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index 395eca0cbb1f..daccef6865e8 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -184,7 +184,6 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)
 			if (ret == 0) {
 				i2c->gpio = gpio_to_desc(platform_data->gpio);
 				gpiod_direction_output(i2c->gpio, 0);
-				i2c->algo_data.reset_chip = i2c_pca_pf_resetchip;
 			} else {
 				dev_warn(&pdev->dev, "Registering gpio failed!\n");
 				i2c->gpio = NULL;
@@ -205,7 +204,10 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)
 
 	i2c->algo_data.data = i2c;
 	i2c->algo_data.wait_for_completion = i2c_pca_pf_waitforcompletion;
-	i2c->algo_data.reset_chip = i2c_pca_pf_dummyreset;
+	if (i2c->gpio)
+		i2c->algo_data.reset_chip = i2c_pca_pf_resetchip;
+	else
+		i2c->algo_data.reset_chip = i2c_pca_pf_dummyreset;
 
 	switch (res->flags & IORESOURCE_MEM_TYPE_MASK) {
 	case IORESOURCE_MEM_32BIT:
-- 
2.13.0

Re: [PATCH 2/6] i2c: pca-platform: correctly set algo_data.reset_chip

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 696 bytes --]

On Fri, Jun 30, 2017 at 12:54:04PM +1200, Chris Packham wrote:
> When device tree support was added the setting of algo_data.reset_chip
> was moved. There were two problems with this. The first being that
> i2c_pca_pf_resetchip was only used if platform data was provided. The
> second that it was unconditionally overridden with
> i2c_pca_pf_dummyreset. Ensure that however the reset gpio is defined the
> correct reset_chip function is used.
> 
> Fixes: commit 4cc7229daa46 ("i2c: pca-platform: switch to struct gpio_desc")
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>

It's a bugfix, so I'll include it in this merge window.

Applied to for-next, thanks!


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[PATCH 3/6] i2c: pca-platform: propagate error from i2c_pca_add_numbered_bus

[Chris Packham]

Rather than returning -ENODEV if i2c_pca_add_numbered_bus() fails,
propagate the error to aid debugging.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
 drivers/i2c/busses/i2c-pca-platform.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index daccef6865e8..853a2abedb05 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -232,9 +232,9 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)
 			return ret;
 	}
 
-	if (i2c_pca_add_numbered_bus(&i2c->adap) < 0) {
-		return -ENODEV;
-	}
+	ret = i2c_pca_add_numbered_bus(&i2c->adap);
+	if (ret)
+		return ret;
 
 	platform_set_drvdata(pdev, i2c);
 
-- 
2.13.0

Re: [PATCH 3/6] i2c: pca-platform: propagate error from i2c_pca_add_numbered_bus

[Andy Shevchenko]

On Fri, Jun 30, 2017 at 3:54 AM, Chris Packham
<chris.packham@alliedtelesis.co.nz> wrote:
> Rather than returning -ENODEV if i2c_pca_add_numbered_bus() fails,
> propagate the error to aid debugging.
>

+ Suggested-by ?

You or Wolfram can use below if you agree on it (I'm fine either way):

Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>

> ---
>  drivers/i2c/busses/i2c-pca-platform.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
> index daccef6865e8..853a2abedb05 100644
> --- a/drivers/i2c/busses/i2c-pca-platform.c
> +++ b/drivers/i2c/busses/i2c-pca-platform.c
> @@ -232,9 +232,9 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)
>                         return ret;
>         }
>
> -       if (i2c_pca_add_numbered_bus(&i2c->adap) < 0) {
> -               return -ENODEV;
> -       }
> +       ret = i2c_pca_add_numbered_bus(&i2c->adap);
> +       if (ret)
> +               return ret;
>
>         platform_set_drvdata(pdev, i2c);
>
> --
> 2.13.0
>



-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH 3/6] i2c: pca-platform: propagate error from i2c_pca_add_numbered_bus

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 468 bytes --]

On Fri, Jun 30, 2017 at 11:40:51AM +0300, Andy Shevchenko wrote:
> On Fri, Jun 30, 2017 at 3:54 AM, Chris Packham
> <chris.packham@alliedtelesis.co.nz> wrote:
> > Rather than returning -ENODEV if i2c_pca_add_numbered_bus() fails,
> > propagate the error to aid debugging.
> >
> 
> + Suggested-by ?
> 
> You or Wolfram can use below if you agree on it (I'm fine either way):
> 
> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>

I'll pick it.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 3/6] i2c: pca-platform: propagate error from i2c_pca_add_numbered_bus

[Chris Packham]

On 30/06/17 20:40, Andy Shevchenko wrote:
> On Fri, Jun 30, 2017 at 3:54 AM, Chris Packham
> <chris.packham@alliedtelesis.co.nz> wrote:
>> Rather than returning -ENODEV if i2c_pca_add_numbered_bus() fails,
>> propagate the error to aid debugging.
>>
> 
> + Suggested-by ?
> 
> You or Wolfram can use below if you agree on it (I'm fine either way):
> 
> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> 

I'll include it (and the Reviewed-by) in v2 if there is one.

>> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> 
>> ---
>>   drivers/i2c/busses/i2c-pca-platform.c | 6 +++---
>>   1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
>> index daccef6865e8..853a2abedb05 100644
>> --- a/drivers/i2c/busses/i2c-pca-platform.c
>> +++ b/drivers/i2c/busses/i2c-pca-platform.c
>> @@ -232,9 +232,9 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)
>>                          return ret;
>>          }
>>
>> -       if (i2c_pca_add_numbered_bus(&i2c->adap) < 0) {
>> -               return -ENODEV;
>> -       }
>> +       ret = i2c_pca_add_numbered_bus(&i2c->adap);
>> +       if (ret)
>> +               return ret;
>>
>>          platform_set_drvdata(pdev, i2c);
>>
>> --
>> 2.13.0
>>
> 
> 
> 

Re: [PATCH 3/6] i2c: pca-platform: propagate error from i2c_pca_add_numbered_bus

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 341 bytes --]

On Fri, Jun 30, 2017 at 12:54:05PM +1200, Chris Packham wrote:
> Rather than returning -ENODEV if i2c_pca_add_numbered_bus() fails,
> propagate the error to aid debugging.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>

Easy one and nice to have. Will be in this merge window.

Applied to for-next, thanks!


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[PATCH 4/6] i2c: pca-platform: unconditionally use devm_gpiod_get_optional

[Chris Packham]

Allow for the reset-gpios property to be defined in the device tree
or via a GPIO lookup table.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
 drivers/i2c/busses/i2c-pca-platform.c | 21 ++++-----------------
 1 file changed, 4 insertions(+), 17 deletions(-)

diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index 853a2abedb05..1e3c247de8f8 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -176,32 +176,19 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)
 	if (platform_data) {
 		i2c->adap.timeout = platform_data->timeout;
 		i2c->algo_data.i2c_clock = platform_data->i2c_clock_speed;
-		if (gpio_is_valid(platform_data->gpio)) {
-			ret = devm_gpio_request_one(&pdev->dev,
-						    platform_data->gpio,
-						    GPIOF_ACTIVE_LOW,
-						    i2c->adap.name);
-			if (ret == 0) {
-				i2c->gpio = gpio_to_desc(platform_data->gpio);
-				gpiod_direction_output(i2c->gpio, 0);
-			} else {
-				dev_warn(&pdev->dev, "Registering gpio failed!\n");
-				i2c->gpio = NULL;
-			}
-		}
 	} else if (np) {
 		i2c->adap.timeout = HZ;
-		i2c->gpio = devm_gpiod_get_optional(&pdev->dev, "reset-gpios", GPIOD_OUT_LOW);
-		if (IS_ERR(i2c->gpio))
-			return PTR_ERR(i2c->gpio);
 		of_property_read_u32_index(np, "clock-frequency", 0,
 					   &i2c->algo_data.i2c_clock);
 	} else {
 		i2c->adap.timeout = HZ;
 		i2c->algo_data.i2c_clock = 59000;
-		i2c->gpio = NULL;
 	}
 
+	i2c->gpio = devm_gpiod_get_optional(&pdev->dev, "reset-gpios", GPIOD_OUT_LOW);
+	if (IS_ERR(i2c->gpio))
+		return PTR_ERR(i2c->gpio);
+
 	i2c->algo_data.data = i2c;
 	i2c->algo_data.wait_for_completion = i2c_pca_pf_waitforcompletion;
 	if (i2c->gpio)
-- 
2.13.0

[PATCH 5/6] i2c: pca-platform: use device_property_read_u32

[Chris Packham]

Use device_property_read_u32 instead of of_property_read_u32_index to
lookup the "clock-frequency" property.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
 drivers/i2c/busses/i2c-pca-platform.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index 1e3c247de8f8..80420f753a87 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -176,13 +176,12 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)
 	if (platform_data) {
 		i2c->adap.timeout = platform_data->timeout;
 		i2c->algo_data.i2c_clock = platform_data->i2c_clock_speed;
-	} else if (np) {
-		i2c->adap.timeout = HZ;
-		of_property_read_u32_index(np, "clock-frequency", 0,
-					   &i2c->algo_data.i2c_clock);
 	} else {
 		i2c->adap.timeout = HZ;
-		i2c->algo_data.i2c_clock = 59000;
+		ret = device_property_read_u32(&pdev->dev, "clock-frequency",
+					       &i2c->algo_data.i2c_clock);
+		if (ret)
+			i2c->algo_data.i2c_clock = 59000;
 	}
 
 	i2c->gpio = devm_gpiod_get_optional(&pdev->dev, "reset-gpios", GPIOD_OUT_LOW);
-- 
2.13.0

Re: [PATCH 5/6] i2c: pca-platform: use device_property_read_u32

[Andy Shevchenko]

On Fri, Jun 30, 2017 at 3:54 AM, Chris Packham
<chris.packham@alliedtelesis.co.nz> wrote:
> Use device_property_read_u32 instead of of_property_read_u32_index to
> lookup the "clock-frequency" property.

My comments below.

>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
>  drivers/i2c/busses/i2c-pca-platform.c | 9 ++++-----
>  1 file changed, 4 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
> index 1e3c247de8f8..80420f753a87 100644
> --- a/drivers/i2c/busses/i2c-pca-platform.c
> +++ b/drivers/i2c/busses/i2c-pca-platform.c
> @@ -176,13 +176,12 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)

>         if (platform_data) {
>                 i2c->adap.timeout = platform_data->timeout;
>                 i2c->algo_data.i2c_clock = platform_data->i2c_clock_speed;

>         } else {
>                 i2c->adap.timeout = HZ;
> -               i2c->algo_data.i2c_clock = 59000;
> +               ret = device_property_read_u32(&pdev->dev, "clock-frequency",
> +                                              &i2c->algo_data.i2c_clock);
> +               if (ret)
> +                       i2c->algo_data.i2c_clock = 59000;

My idea is to get rid of legacy platform data completely.
That's why I suggested device_* in the first place.

In similar way like you did with GPIO lookup table, you may use
PROPERTY_ENTRY*() macros in the board files.

Does it make sense?

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH 5/6] i2c: pca-platform: use device_property_read_u32

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 670 bytes --]


> > -               i2c->algo_data.i2c_clock = 59000;
> > +               ret = device_property_read_u32(&pdev->dev, "clock-frequency",
> > +                                              &i2c->algo_data.i2c_clock);
> > +               if (ret)
> > +                       i2c->algo_data.i2c_clock = 59000;
> 
> My idea is to get rid of legacy platform data completely.
> That's why I suggested device_* in the first place.
> 
> In similar way like you did with GPIO lookup table, you may use
> PROPERTY_ENTRY*() macros in the board files.
> 
> Does it make sense?

Frankly, I am not a big fan of converting board files if we cannot test
the changes.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 5/6] i2c: pca-platform: use device_property_read_u32

[Andy Shevchenko]

On Fri, Jun 30, 2017 at 12:03 PM, Wolfram Sang <wsa@the-dreams.de> wrote:
>
>> > -               i2c->algo_data.i2c_clock = 59000;
>> > +               ret = device_property_read_u32(&pdev->dev, "clock-frequency",
>> > +                                              &i2c->algo_data.i2c_clock);
>> > +               if (ret)
>> > +                       i2c->algo_data.i2c_clock = 59000;
>>
>> My idea is to get rid of legacy platform data completely.
>> That's why I suggested device_* in the first place.
>>
>> In similar way like you did with GPIO lookup table, you may use
>> PROPERTY_ENTRY*() macros in the board files.
>>
>> Does it make sense?
>
> Frankly, I am not a big fan of converting board files if we cannot test
> the changes.

So, if no one is using that old boards, should we really take care
more than just compile test?

P.S. Legacy platform data makes a burden of development nowadays.
Built-in device properties API (as a part of Unified Device
Properties) is exactly for getting rid of legacy stuff and make things
much cleaner.

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH 5/6] i2c: pca-platform: use device_property_read_u32

[Chris Packham]

On 30/06/17 22:56, Andy Shevchenko wrote:
> On Fri, Jun 30, 2017 at 12:03 PM, Wolfram Sang <wsa@the-dreams.de> wrote:
>>
>>>> -               i2c->algo_data.i2c_clock = 59000;
>>>> +               ret = device_property_read_u32(&pdev->dev, "clock-frequency",
>>>> +                                              &i2c->algo_data.i2c_clock);
>>>> +               if (ret)
>>>> +                       i2c->algo_data.i2c_clock = 59000;
>>>
>>> My idea is to get rid of legacy platform data completely.
>>> That's why I suggested device_* in the first place.
>>>
>>> In similar way like you did with GPIO lookup table, you may use
>>> PROPERTY_ENTRY*() macros in the board files.
>>>
>>> Does it make sense?
>>
>> Frankly, I am not a big fan of converting board files if we cannot test
>> the changes.
> 
> So, if no one is using that old boards, should we really take care
> more than just compile test?
> 
> P.S. Legacy platform data makes a burden of development nowadays.
> Built-in device properties API (as a part of Unified Device
> Properties) is exactly for getting rid of legacy stuff and make things
> much cleaner.

We could probably go with an approach of making the device properties 
the default which would suit the new style and leave the platform_data 
to override things if it is present.

If/when the older platforms go away we can drop struct 
i2c_pca9564_pf_platform_data.

Re: [PATCH 5/6] i2c: pca-platform: use device_property_read_u32

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 870 bytes --]


> >> Frankly, I am not a big fan of converting board files if we cannot test
> >> the changes.
> > 
> > So, if no one is using that old boards, should we really take care
> > more than just compile test?
> > 
> > P.S. Legacy platform data makes a burden of development nowadays.
> > Built-in device properties API (as a part of Unified Device
> > Properties) is exactly for getting rid of legacy stuff and make things
> > much cleaner.
> 
> We could probably go with an approach of making the device properties 
> the default which would suit the new style and leave the platform_data 
> to override things if it is present.
> 
> If/when the older platforms go away we can drop struct 
> i2c_pca9564_pf_platform_data.

I don't have a super strong opinion, so we can discuss this for 4.14.
For 4.13, I picked the two easy patches already. Thanks!


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[PATCH 6/6] i2c: pca-platform: drop gpio from platform data

[Chris Packham]

Now that the i2c-pca-plaform driver is using the device managed API for
gpios there is no need for the reset gpio to be specified via
i2c_pca9564_pf_platform_data.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
 arch/blackfin/mach-bf561/boards/acvilon.c | 1 -
 arch/sh/boards/board-sh7785lcr.c          | 1 -
 include/linux/i2c-pca-platform.h          | 3 ---
 3 files changed, 5 deletions(-)

diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c
index 37f8f25a1347..192404318a36 100644
--- a/arch/blackfin/mach-bf561/boards/acvilon.c
+++ b/arch/blackfin/mach-bf561/boards/acvilon.c
@@ -112,7 +112,6 @@ static struct resource bfin_i2c_pca_resources[] = {
 };
 
 struct i2c_pca9564_pf_platform_data pca9564_platform_data = {
-	.gpio = -1,
 	.i2c_clock_speed = 330000,
 	.timeout = HZ,
 };
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index 4c321d0da945..1170fc536db7 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -253,7 +253,6 @@ static struct gpiod_lookup_table i2c_gpio_table = {
 };
 
 static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
-	.gpio			= 0,
 	.i2c_clock_speed	= I2C_PCA_CON_330kHz,
 	.timeout		= HZ,
 };
diff --git a/include/linux/i2c-pca-platform.h b/include/linux/i2c-pca-platform.h
index aba33759dec4..6331eaef9352 100644
--- a/include/linux/i2c-pca-platform.h
+++ b/include/linux/i2c-pca-platform.h
@@ -2,9 +2,6 @@
 #define I2C_PCA9564_PLATFORM_H
 
 struct i2c_pca9564_pf_platform_data {
-	int gpio;		/* pin to reset chip. driver will work when
-				 * not supplied (negative value), but it
-				 * cannot exit some error conditions then */
 	int i2c_clock_speed;	/* values are defined in linux/i2c-algo-pca.h */
 	int timeout;		/* timeout in jiffies */
 };
-- 
2.13.0