* [PATCH v4 1/2] dt-bindings: ufs: Add bindings for Cadence UFS
@ 2018-09-20 13:08 Janek Kotas
2018-09-25 15:25 ` Rob Herring
0 siblings, 1 reply; 2+ messages in thread
From: Janek Kotas @ 2018-09-20 13:08 UTC (permalink / raw)
To: robh+dt, mark.rutland, vinholikatti, jejb, martin.petersen
Cc: devicetree, linux-kernel, linux-scsi
This patch adds a DT binding documentation for
Cadence UFS Host Controller.
Signed-off-by: Jan Kotas <jank@cadence.com>
---
.../devicetree/bindings/ufs/cdns,ufshc.txt | 31 ++++++++++++++++++++++
1 file changed, 31 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
diff --git a/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt b/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
new file mode 100644
index 0000000..a04a498
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
@@ -0,0 +1,31 @@
+* Cadence Universal Flash Storage (UFS) Controller
+
+UFS nodes are defined to describe on-chip UFS host controllers.
+Each UFS controller instance should have its own node.
+Please see the ufshcd-pltfrm.txt for a list of all available properties.
+
+Required properties:
+- compatible : Compatible list, contains the following controller:
+ "cdns,ufshc"
+ complemented with the JEDEC version:
+ "jedec,ufs-2.0"
+
+- reg : Address and length of the UFS register set.
+- interrupts : One interrupt mapping.
+- freq-table-hz : Clock frequency table.
+ See the ufshcd-pltfrm.txt for details.
+- clocks : List of phandle and clock specifier pairs.
+- clock-names : List of clock input name strings sorted in the same
+ order as the clocks property. "core_clk" is mandatory.
+ Depending on a type of a PHY,
+ the "phy_clk" clock can also be added, if needed.
+
+Example:
+ ufs@fd030000 {
+ compatible = "cdns,ufshc", "jedec,ufs-2.0";
+ reg = <0xfd030000 0x10000>;
+ interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
+ freq-table-hz = <0 0>, <0 0>;
+ clocks = <&ufs_core_clk>, <&ufs_phy_clk>;
+ clock-names = "core_clk", "phy_clk";
+ };
--
1.9.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v4 1/2] dt-bindings: ufs: Add bindings for Cadence UFS
2018-09-20 13:08 [PATCH v4 1/2] dt-bindings: ufs: Add bindings for Cadence UFS Janek Kotas
@ 2018-09-25 15:25 ` Rob Herring
0 siblings, 0 replies; 2+ messages in thread
From: Rob Herring @ 2018-09-25 15:25 UTC (permalink / raw)
To: Janek Kotas
Cc: mark.rutland, vinholikatti, jejb, martin.petersen, devicetree,
linux-kernel, linux-scsi
On Thu, Sep 20, 2018 at 01:08:22PM +0000, Janek Kotas wrote:
> This patch adds a DT binding documentation for
> Cadence UFS Host Controller.
>
> Signed-off-by: Jan Kotas <jank@cadence.com>
> ---
> .../devicetree/bindings/ufs/cdns,ufshc.txt | 31 ++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-09-25 15:25 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-09-20 13:08 [PATCH v4 1/2] dt-bindings: ufs: Add bindings for Cadence UFS Janek Kotas
2018-09-25 15:25 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).