linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Re: [PATCH v2] hwmon:Driver for Delta power supplies
       [not found] <tencent_DCB41AD18DD01711F62248CD7CBAC7F48A08@qq.com>
@ 2020-09-19  5:30 ` Guenter Roeck
  0 siblings, 0 replies; only message in thread
From: Guenter Roeck @ 2020-09-19  5:30 UTC (permalink / raw)
  To: xiao.mx.ma, Jean Delvare, linux-hwmon, linux-kernel, xiao.mx.ma,
	jiajia.feng

On 9/18/20 12:18 AM, xiao.mx.ma wrote:
> Add delta.rst in Documentation/hwmon
> Tristate "DELTA" in Kconfig is changed to "DELTA_POWER_SUPPLIES"
> Modify code: drop the excessive empty lines, correct the comment content,
> adjust indent, remove extra brackets.
> 
Description goes here.

> Signed-off-by: xiao.mx.ma <734056705@qq.com>
> ---

Change log goes here.

Other than that, this is a patch on top of the previous patch.
Please combine the two patches into one.

>  Documentation/hwmon/delta.rst |  52 ++++++++++

delta.rst needs to be added to Documentation/hwmon/index.rst.

>  drivers/hwmon/pmbus/Kconfig   |   2 +-
>  drivers/hwmon/pmbus/delta.c   | 172 ++++++++--------------------------
>  3 files changed, 90 insertions(+), 136 deletions(-)
>  create mode 100644 Documentation/hwmon/delta.rst
> 
> diff --git a/Documentation/hwmon/delta.rst b/Documentation/hwmon/delta.rst
> new file mode 100644
> index 000000000000..790701d310e3
> --- /dev/null
> +++ b/Documentation/hwmon/delta.rst
> @@ -0,0 +1,52 @@
> +Kernel driver delta
> +=====================
> +
> +Supported chips:
> +
> +  * DELTA Q54SJ108A2NCAH, Q54SJ108A2NCDH, Q54SJ108A2NCPG, Q54SJ108A2NCPH
> +
> +    Prefix: 'Q54SJ108A2'
> +
> +    Addresses scanned: -
> +
> +    Datasheet: https://filecenter.delta-china.com.cn/products/download/01/0102/datasheet/DS_Q54SJ108A2.pdf
> +
> +Authors:
> +    xiao.mx.ma <734056705@qq.com>
> +
> +
> +Description
> +-----------
> +
> +This driver implements support for DELTA Q54SJ108A2NCAH, Q54SJ108A2NCDH, 
> +Q54SJ108A2NCPG, and Q54SJ108A2NCPH 1/4 Brick DC/DC Regulated Power Module 
> +with PMBus support.
> +
> +The driver is a client driver to the core PMBus driver.
> +Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
> +
> +
> +Usage Notes
> +-----------
> +
> +This driver does not auto-detect devices. You will have to instantiate the
> +devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
> +details.
> +
> +
> +Sysfs entries
> +-------------
> +
> +=================== ===== =======================================================
> +curr1_alarm         RO    Output current alarm
> +curr1_input         RO    Output current
> +curr1_label         RO    'iout1'
> +in1_alarm           RO    Input voltage alarm
> +in1_input           RO    Input voltage
> +in1_label           RO    'vin'
> +in2_alarm           RO    Output voltage alarm
> +in2_input           RO    Output voltage
> +in2_label           RO    'vout1'
> +temp1_alarm         RO    Temeperature alarm
> +temp1_input         RO    Chip temperature
> +=================== ===== =======================================================
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index a9468be10d7e..b03311340add 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -46,7 +46,7 @@ config SENSORS_BEL_PFE
>  	  be called bel-pfe.
>  
>  config SENSORS_DELTA
> -	tristate "DELTA"
> +	tristate "DELTA_POWER_SUPPLIES"

This can be some text.

>  	help
>  	  If you say yes here you get hardware monitoring support for Delta Power Supplies.
>  
> diff --git a/drivers/hwmon/pmbus/delta.c b/drivers/hwmon/pmbus/delta.c
> index 090429881c45..04f09767921c 100644
> --- a/drivers/hwmon/pmbus/delta.c
> +++ b/drivers/hwmon/pmbus/delta.c
> @@ -1,234 +1,136 @@
>  // SPDX-License-Identifier: GPL-2.0-or-later
> -
>  /*
> - * Driver for Q54SJ108A2, Q50SN12050, and Q50SN12072 Integrated, Step-Down
> - * Switching Regulators
> + * Driver for Delta modules, Q54SJ108A2 series 1/4 Brick DC/DC
> + * Regulated Power Module
>   *
>   * Copyright 2020 Delta LLC.
>   */
>  
> -
>  #include <linux/bits.h>
> -
>  #include <linux/err.h>
> -
>  #include <linux/i2c.h>
> -
>  #include <linux/init.h>
> -
>  #include <linux/kernel.h>
> -
>  #include <linux/module.h>
> -
>  #include <linux/mutex.h>
> -
>  #include <linux/of_device.h>
> -
>  #include <linux/pmbus.h>
> -
>  #include <linux/util_macros.h>
> -
>  #include "pmbus.h"
>  
>  enum chips {
> -
>  	Q54SJ108A2
>  };
>  
>  static const struct pmbus_driver_info delta_info[] = {
> -
> -[Q54SJ108A2] = {
> -
> -.pages = 1,
> -
> -/* Source : Delta Q54SJ108A2 */
> -
> -.format[PSC_TEMPERATURE] = linear,
> -
> -.format[PSC_VOLTAGE_IN] = linear,
> -
> -.format[PSC_CURRENT_OUT] = linear,
> -
> -
> -.func[0] = PMBUS_HAVE_VIN |
> -
> -PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
> -
> -PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
> -
> -PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
> -
> -PMBUS_HAVE_STATUS_INPUT,
> -
> -},
> -
> +	[Q54SJ108A2] = {
> +		.pages = 1,
> +
> +		/* Source : Delta Q54SJ108A2 */
> +		.format[PSC_TEMPERATURE] = linear,
> +		.format[PSC_VOLTAGE_IN] = linear,
> +		.format[PSC_CURRENT_OUT] = linear,
> +
> +		.func[0] = PMBUS_HAVE_VIN |
> +		PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
> +		PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
> +		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
> +		PMBUS_HAVE_STATUS_INPUT,
> +	},
>  };
>  
>  
>  
>  static int delta_probe(struct i2c_client *client, const struct i2c_device_id *id)
>  {
> -
>  	struct device *dev = &client->dev;
> -
>  	u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
> -
>  	struct pmbus_driver_info *info;
> -
>  	enum chips chip_id;
> -
>  	int ret;
>  
>  	if (!i2c_check_functionality(client->adapter,
> -
> -		I2C_FUNC_SMBUS_BYTE_DATA |
> -
> -		I2C_FUNC_SMBUS_WORD_DATA |
> -
> -		I2C_FUNC_SMBUS_BLOCK_DATA))
> -
> +				     I2C_FUNC_SMBUS_BYTE_DATA |
> +				     I2C_FUNC_SMBUS_WORD_DATA |
> +				     I2C_FUNC_SMBUS_BLOCK_DATA))
>  		return -ENODEV;
>  
>  	if (client->dev.of_node)
> -
>  		chip_id = (enum chips)of_device_get_match_data(dev);
> -
>  	else
> -
>  		chip_id = id->driver_data;
>  
>  	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
> -
>  	if (ret < 0) {
> -
>  		dev_err(&client->dev, "Failed to read Manufacturer ID\n");
> -
>  		return ret;
> -
>  	}
> -
> -	if (ret != 5 || strncmp((buf), "DELTA", 5)) {
> -
> +	if (ret != 5 || strncmp(buf, "DELTA", 5)) {
>  		buf[ret] = '\0';
> -
>  		dev_err(dev, "Unsupported Manufacturer ID '%s'\n", buf);
> -
>  		return -ENODEV;
> -
>  	}
>  
> -/*
> - * The chips support reading PMBUS_MFR_MODEL.
> - */
> -
> +	/*
> +	 * The chips support reading PMBUS_MFR_MODEL.
> +	 */
>  	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
> -
>  	if (ret < 0) {
> -
>  		dev_err(dev, "Failed to read Manufacturer Model\n");
> -
>  		return ret;
> -
>  	}
> -
> -	if (ret != 14 || strncmp((buf), "Q54SJ108A2", 10)) {
> -
> +	if (ret != 14 || strncmp(buf, "Q54SJ108A2", 10)) {
>  		buf[ret] = '\0';
> -
>  		dev_err(dev, "Unsupported Manufacturer Model '%s'\n", buf);
> -
>  		return -ENODEV;
> -
>  	}
>  
>  	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_REVISION, buf);
> -
>  	if (ret < 0) {
> -
>  		dev_err(dev, "Failed to read Manufacturer Revision\n");
> -
>  		return ret;
> -
>  	}
> -
>  	if (ret != 4 || buf[0] != 'S') {
> -
>  		buf[ret] = '\0';
> -
>  		dev_err(dev, "Unsupported Manufacturer Revision '%s'\n", buf);
> -
>  		return -ENODEV;
> -
>  	}
>  
>  	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
> -
>  	if (!info)
> -
>  		return -ENOMEM;
>  
>  	memcpy(info, &delta_info[chip_id], sizeof(*info));
>  
>  	return pmbus_do_probe(client, id, info);
> -
>  }
>  
> -
> -
>  static const struct i2c_device_id delta_id[] = {
> -
> -{ "Q54SJ108A2", Q54SJ108A2 },
> -
> -{ },
> -
> +	{ "Q54SJ108A2", Q54SJ108A2 },
> +	{ },
>  };
>  
> -
> -
>  MODULE_DEVICE_TABLE(i2c, delta_id);
>  
> -
> -
>  static const struct of_device_id delta_of_match[] = {
> -
> -{ .compatible = "delta,Q54SJ108A2", .data = (void *)Q54SJ108A2 },
> -
> -{ },
> -
> +	{ .compatible = "delta,Q54SJ108A2", .data = (void *)Q54SJ108A2 },
> +	{ },
>  };
>  
> -
> -
>  MODULE_DEVICE_TABLE(of, delta_of_match);
>  
> -
> -
>  static struct i2c_driver delta_driver = {
> -
> -.driver = {
> -
> -.name = "Q54SJ108A2",
> -
> -.of_match_table = delta_of_match,
> -
> -},
> -
> -.probe = delta_probe,
> -
> -.remove = pmbus_do_remove,
> -
> -.id_table = delta_id,
> -
> +	.driver = {
> +		.name = "Q54SJ108A2",
> +		.of_match_table = delta_of_match,
> +	},
> +	.probe = delta_probe,
> +	.remove = pmbus_do_remove,
> +	.id_table = delta_id,
>  };
>  
> -
> -
>  module_i2c_driver(delta_driver);
>  
> -
> -
> -MODULE_AUTHOR("Delta <734056705@qq.com>");
> -
> -MODULE_DESCRIPTION("PMBus driver for Delta Q54SJ108A2NCAH / Q54SJ108A2NCDH / Q54SJ108A2NCPG / Q54SJ108A2NCPH");
> -
> +MODULE_AUTHOR("xiao.mx.ma <734056705@qq.com>");
> +MODULE_DESCRIPTION("PMBus driver for Delta Q54SJ108A2 series modules");
>  MODULE_LICENSE("GPL");
> 


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2020-09-19  5:30 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <tencent_DCB41AD18DD01711F62248CD7CBAC7F48A08@qq.com>
2020-09-19  5:30 ` [PATCH v2] hwmon:Driver for Delta power supplies Guenter Roeck

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).