From: Benjamin Gaignard <benjamin.gaignard@collabora.com>
To: Ezequiel Garcia <ezequiel@collabora.com>,
p.zabel@pengutronix.de, mchehab@kernel.org, robh+dt@kernel.org,
shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
gregkh@linuxfoundation.org, mripard@kernel.org,
paul.kocialkowski@bootlin.com, wens@csie.org,
jernej.skrabec@siol.net, peng.fan@nxp.com,
hverkuil-cisco@xs4all.nl, dan.carpenter@oracle.com
Cc: linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@collabora.com
Subject: Re: [PATCH v4 09/11] media: hantro: IMX8M: add variant for G2/HEVC codec
Date: Fri, 5 Mar 2021 10:32:51 +0100 [thread overview]
Message-ID: <9766921b-f363-a200-e513-36e0524928a1@collabora.com> (raw)
In-Reply-To: <0a4ad90338e58a7cc953fb9cd0a0414dacb010d4.camel@collabora.com>
Le 03/03/2021 à 23:08, Ezequiel Garcia a écrit :
> On Wed, 2021-03-03 at 12:39 +0100, Benjamin Gaignard wrote:
>> Add variant to IMX8M to enable G2/HEVC codec.
>> Define the capabilities for the hardware up to 3840x2160.
>> Retrieve the hardware version at init to distinguish G1 from G2.
>>
>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
>> ---
>> version 2:
>> - remove useless clocks
>>
>> drivers/staging/media/hantro/hantro_drv.c | 1 +
>> drivers/staging/media/hantro/hantro_hw.h | 1 +
>> drivers/staging/media/hantro/imx8m_vpu_hw.c | 95 ++++++++++++++++++++-
>> 3 files changed, 93 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
>> index bc90a52f4d3d..976be7b6ecfb 100644
>> --- a/drivers/staging/media/hantro/hantro_drv.c
>> +++ b/drivers/staging/media/hantro/hantro_drv.c
>> @@ -591,6 +591,7 @@ static const struct of_device_id of_hantro_match[] = {
>> #endif
>> #ifdef CONFIG_VIDEO_HANTRO_IMX8M
>> { .compatible = "nxp,imx8mq-vpu", .data = &imx8mq_vpu_variant, },
>> + { .compatible = "nxp,imx8mq-vpu-g2", .data = &imx8mq_vpu_g2_variant },
>> #endif
>> { /* sentinel */ }
>> };
>> diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
>> index dade3b0769c1..f61f58da05fe 100644
>> --- a/drivers/staging/media/hantro/hantro_hw.h
>> +++ b/drivers/staging/media/hantro/hantro_hw.h
>> @@ -193,6 +193,7 @@ extern const struct hantro_variant rk3399_vpu_variant;
>> extern const struct hantro_variant rk3328_vpu_variant;
>> extern const struct hantro_variant rk3288_vpu_variant;
>> extern const struct hantro_variant imx8mq_vpu_variant;
>> +extern const struct hantro_variant imx8mq_vpu_g2_variant;
>>
>> extern const struct hantro_postproc_regs hantro_g1_postproc_regs;
>>
>> diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c
>> index d5b4312b9391..46b33531be85 100644
>> --- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
>> +++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
>> @@ -12,6 +12,7 @@
>> #include "hantro.h"
>> #include "hantro_jpeg.h"
>> #include "hantro_g1_regs.h"
>> +#include "hantro_g2_regs.h"
>>
>> static int imx8mq_runtime_resume(struct hantro_dev *vpu)
>> {
>> @@ -90,6 +91,26 @@ static const struct hantro_fmt imx8m_vpu_dec_fmts[] = {
>> },
>> };
>>
>> +static const struct hantro_fmt imx8m_vpu_g2_dec_fmts[] = {
>> + {
>> + .fourcc = V4L2_PIX_FMT_NV12,
>> + .codec_mode = HANTRO_MODE_NONE,
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_HEVC_SLICE,
>> + .codec_mode = HANTRO_MODE_HEVC_DEC,
>> + .max_depth = 2,
>> + .frmsize = {
>> + .min_width = 48,
>> + .max_width = 3840,
>> + .step_width = MB_DIM,
>> + .min_height = 48,
>> + .max_height = 2160,
>> + .step_height = MB_DIM,
>> + },
>> + },
>> +};
>> +
>> static irqreturn_t imx8m_vpu_g1_irq(int irq, void *dev_id)
>> {
>> struct hantro_dev *vpu = dev_id;
>> @@ -108,9 +129,42 @@ static irqreturn_t imx8m_vpu_g1_irq(int irq, void *dev_id)
>> return IRQ_HANDLED;
>> }
>>
>> +static irqreturn_t imx8m_vpu_g2_irq(int irq, void *dev_id)
>> +{
>> + struct hantro_dev *vpu = dev_id;
>> + enum vb2_buffer_state state;
>> + u32 status;
>> +
>> + status = vdpu_read(vpu, HEVC_REG_INTERRUPT);
>> + state = (status & HEVC_REG_INTERRUPT_DEC_RDY_INT) ?
>> + VB2_BUF_STATE_DONE : VB2_BUF_STATE_ERROR;
>> +
>> + vdpu_write(vpu, 0, HEVC_REG_INTERRUPT);
>> + vdpu_write(vpu, HEVC_REG_CONFIG_DEC_CLK_GATE_E, HEVC_REG_CONFIG);
> Is this clock gate enable needed on each interrupt?
Yes because if a reset as occur after init, it is the only
platform specific piece of code that is called.
>
>> +
>> + hantro_irq_done(vpu, state);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> static int imx8mq_vpu_hw_init(struct hantro_dev *vpu)
>> {
>> - vpu->dec_base = vpu->reg_bases[0];
>> + int ret;
>> +
>> + /* Check variant version */
>> + ret = clk_bulk_prepare_enable(vpu->variant->num_clocks, vpu->clocks);
>> + if (ret) {
>> + dev_err(vpu->dev, "Failed to enable clocks\n");
>> + return ret;
>> + }
>> +
>> + /* Make that the device has been reset before read it id */
>> + ret = device_reset(vpu->dev);
>> + if (ret)
>> + dev_err(vpu->dev, "Failed to reset Hantro VPU\n");
>> +
>> + vpu->core_hw_dec_rev = (vdpu_read(vpu, HEVC_REG_VERSION) >> 16) & 0xffff;
>> + clk_bulk_disable_unprepare(vpu->variant->num_clocks, vpu->clocks);
>>
>> return 0;
>> }
>> @@ -149,17 +203,32 @@ static const struct hantro_codec_ops imx8mq_vpu_codec_ops[] = {
>> },
>> };
>>
>> +static const struct hantro_codec_ops imx8mq_vpu_g2_codec_ops[] = {
>> + [HANTRO_MODE_HEVC_DEC] = {
>> + .run = hantro_g2_hevc_dec_run,
>> + .reset = imx8mq_vpu_reset,
>> + .init = hantro_hevc_dec_init,
>> + .exit = hantro_hevc_dec_exit,
>> + },
>> +};
>> +
>> /*
>> * VPU variants.
>> */
>>
>> static const struct hantro_irq imx8mq_irqs[] = {
>> { "g1", imx8m_vpu_g1_irq },
>> - { "g2", NULL /* TODO: imx8m_vpu_g2_irq */ },
>> };
>>
>> -static const char * const imx8mq_clk_names[] = { "g1", "g2", "bus" };
>> -static const char * const imx8mq_reg_names[] = { "g1", "g2", "ctrl" };
>> +static const struct hantro_irq imx8mq_g2_irqs[] = {
>> + { "g2", imx8m_vpu_g2_irq },
>> +};
>> +
>> +static const char * const imx8mq_clk_names[] = { "g1", "bus"};
>> +static const char * const imx8mq_reg_names[] = { "g1"};
>> +
>> +static const char * const imx8mq_g2_clk_names[] = { "g2", "bus"};
>> +static const char * const imx8mq_g2_reg_names[] = { "g2"};
>>
>> const struct hantro_variant imx8mq_vpu_variant = {
>> .dec_fmts = imx8m_vpu_dec_fmts,
>> @@ -179,3 +248,21 @@ const struct hantro_variant imx8mq_vpu_variant = {
>> .reg_names = imx8mq_reg_names,
>> .num_regs = ARRAY_SIZE(imx8mq_reg_names)
>> };
>> +
>> +const struct hantro_variant imx8mq_vpu_g2_variant = {
>> + .dec_offset = 0x0,
>> + .dec_fmts = imx8m_vpu_g2_dec_fmts,
>> + .num_dec_fmts = ARRAY_SIZE(imx8m_vpu_g2_dec_fmts),
>> + .postproc_fmts = imx8m_vpu_postproc_fmts,
>> + .num_postproc_fmts = ARRAY_SIZE(imx8m_vpu_postproc_fmts),
> Is this postproc_fmts correct?
No, I will remove it since G2 doesn't have postproc.
Benjamin
>
> Thanks!
> Ezequiel
>
>> + .codec = HANTRO_HEVC_DECODER,
>> + .codec_ops = imx8mq_vpu_g2_codec_ops,
>> + .init = imx8mq_vpu_hw_init,
>> + .runtime_resume = imx8mq_runtime_resume,
>> + .irqs = imx8mq_g2_irqs,
>> + .num_irqs = ARRAY_SIZE(imx8mq_g2_irqs),
>> + .clk_names = imx8mq_g2_clk_names,
>> + .num_clocks = ARRAY_SIZE(imx8mq_g2_clk_names),
>> + .reg_names = imx8mq_g2_reg_names,
>> + .num_regs = ARRAY_SIZE(imx8mq_g2_reg_names),
>> +};
>
>
next prev parent reply other threads:[~2021-03-05 9:33 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-03 11:39 [PATCH v4 00/11] Add HANTRO G2/HEVC decoder support for IMX8MQ Benjamin Gaignard
2021-03-03 11:39 ` [PATCH v4 01/11] media: hevc: Add fields and flags for hevc PPS Benjamin Gaignard
2021-03-03 11:39 ` [PATCH v4 02/11] media: hevc: Add decode params control Benjamin Gaignard
2021-03-03 11:39 ` [PATCH v4 03/11] media: hantro: change hantro_codec_ops run prototype to return errors Benjamin Gaignard
2021-03-03 21:56 ` Ezequiel Garcia
2021-03-05 9:24 ` Benjamin Gaignard
2021-03-03 11:39 ` [PATCH v4 04/11] media: hantro: Define HEVC codec profiles and supported features Benjamin Gaignard
2021-03-03 11:39 ` [PATCH v4 05/11] media: hantro: Add a field to distinguish the hardware versions Benjamin Gaignard
2021-03-03 22:05 ` Ezequiel Garcia
2021-03-05 9:27 ` Benjamin Gaignard
2021-03-03 11:39 ` [PATCH v4 06/11] media: uapi: Add a control for HANTRO driver Benjamin Gaignard
2021-03-03 11:39 ` [PATCH v4 07/11] media: hantro: Introduce G2/HEVC decoder Benjamin Gaignard
2021-03-16 18:46 ` Ezequiel Garcia
2021-03-16 20:19 ` Benjamin Gaignard
2021-03-16 20:35 ` Ezequiel Garcia
2021-03-03 11:39 ` [PATCH v4 08/11] media: hantro: handle V4L2_PIX_FMT_HEVC_SLICE control Benjamin Gaignard
2021-03-03 11:39 ` [PATCH v4 09/11] media: hantro: IMX8M: add variant for G2/HEVC codec Benjamin Gaignard
2021-03-03 22:08 ` Ezequiel Garcia
2021-03-05 9:32 ` Benjamin Gaignard [this message]
2021-03-03 11:39 ` [PATCH v4 10/11] dt-bindings: media: nxp,imx8mq-vpu: Update bindings Benjamin Gaignard
2021-03-08 20:08 ` Rob Herring
2021-03-03 11:39 ` [PATCH v4 11/11] arm64: dts: imx8mq: Add node to G2 hardware Benjamin Gaignard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9766921b-f363-a200-e513-36e0524928a1@collabora.com \
--to=benjamin.gaignard@collabora.com \
--cc=dan.carpenter@oracle.com \
--cc=devicetree@vger.kernel.org \
--cc=ezequiel@collabora.com \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=jernej.skrabec@siol.net \
--cc=kernel@collabora.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mchehab@kernel.org \
--cc=mripard@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=paul.kocialkowski@bootlin.com \
--cc=peng.fan@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).