From: Chris Lapa <chris@lapa.com.au>
To: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org
Subject: Re: [PATCH 1/2] max8903: adds support for initiation via device tree.
Date: Fri, 10 Jun 2016 15:35:44 +1000 [thread overview]
Message-ID: <98c757cd-d1b4-1599-ebb3-2a9cc3fc478d@lapa.com.au> (raw)
In-Reply-To: <CAJKOXPdNZbY6=sUbu2Q+pR-PwAD92H5jm5JzmwnBdCbvk3F6KQ@mail.gmail.com>
Hi Krzysztof,
Thanks for the review. I'm working on those changes now.
However just so I know for the future. Why no error checking on
devm_kzalloc() result? Looking through the source for devm_kzalloc() it
looks like NULL isn't caught anywhere else.
Thanks,
Chris
On 9/06/2016 8:35 PM, Krzysztof Kozlowski wrote:
> Hi,
>
> Thanks for your contribution. Few comments below:
>
> On Thu, Jun 2, 2016 at 8:44 AM, <chris@lapa.com.au> wrote:
>> From: Chris Lapa <chris@lapa.com.au>
>>
>> This commit also adds requesting gpio's via devm_gpio_request() to ensure
>> the gpio is available for usage by the driver.
>>
>> Signed-off-by: Chris Lapa <chris@lapa.com.au>
>> ---
>> .../devicetree/bindings/power/max8903-charger.txt | 28 ++
>> drivers/power/max8903_charger.c | 281 ++++++++++++++++-----
>> 2 files changed, 250 insertions(+), 59 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/power/max8903-charger.txt
>
> Please put the bindings documentation in separate, first patch.
>
>>
>> diff --git a/Documentation/devicetree/bindings/power/max8903-charger.txt b/Documentation/devicetree/bindings/power/max8903-charger.txt
>> new file mode 100644
>> index 0000000..7207731
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/power/max8903-charger.txt
>> @@ -0,0 +1,28 @@
>> +Maxim Semiconductor MAX8903 Battery Charger bindings
>> +
>> +Required properties:
>> +- compatible: "max8903-charger" for MAX8903 Battery Charger
>
> Needs a 'maxim,' prefix.
>
>> +- dc_valid:
>> + - dok: DC power OK pin
>> +- usb_valid:
>> + - uok: USB power OK pin
>
> I don't understand the explanation of them - dok/uok. What do you want
> to say here?
>
>> +
>> +Optional properties:
>> +- cen: Charge enable pin
>> +- chg: Charger status pin
>> +- flt: Fault pin
>> +- dcm: Current limit mode setting (DC or USB)
>> +- usus: USB suspend pin
>
> Each gpio should be suffixed with '-gpios' (see
> Documentation/devicetree/bindings/gpio/gpio.txt).
>
>> +
>> +
>> +Example:
>> +
>> + max8903-charger {
>> + compatible = "max8903-charger";
>> + dok = <&gpio2 3 GPIO_ACTIVE_LOW>;
>> + flt = <&gpio2 2 GPIO_ACTIVE_LOW>;
>> + chg = <&gpio3 15 GPIO_ACTIVE_LOW>;
>> + cen = <&gpio2 5 GPIO_ACTIVE_LOW>;
>> + dc_valid;
>> + status = "okay";
>> + };
>> diff --git a/drivers/power/max8903_charger.c b/drivers/power/max8903_charger.c
>> index 17876ca..1989c10 100644
>> --- a/drivers/power/max8903_charger.c
>> +++ b/drivers/power/max8903_charger.c
>> @@ -23,13 +23,16 @@
>> #include <linux/gpio.h>
>> #include <linux/interrupt.h>
>> #include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/of_gpio.h>
>> #include <linux/slab.h>
>> #include <linux/power_supply.h>
>> #include <linux/platform_device.h>
>> #include <linux/power/max8903_charger.h>
>>
>> struct max8903_data {
>> - struct max8903_pdata pdata;
>> + struct max8903_pdata *pdata;
>> struct device *dev;
>> struct power_supply *psy;
>> struct power_supply_desc psy_desc;
>> @@ -53,8 +56,8 @@ static int max8903_get_property(struct power_supply *psy,
>> switch (psp) {
>> case POWER_SUPPLY_PROP_STATUS:
>> val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
>> - if (data->pdata.chg) {
>> - if (gpio_get_value(data->pdata.chg) == 0)
>> + if (data->pdata->chg) {
>> + if (gpio_get_value(data->pdata->chg) == 0)
>> val->intval = POWER_SUPPLY_STATUS_CHARGING;
>> else if (data->usb_in || data->ta_in)
>> val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
>> @@ -75,13 +78,14 @@ static int max8903_get_property(struct power_supply *psy,
>> default:
>> return -EINVAL;
>> }
>> +
>> return 0;
>> }
>>
>> static irqreturn_t max8903_dcin(int irq, void *_data)
>> {
>> struct max8903_data *data = _data;
>> - struct max8903_pdata *pdata = &data->pdata;
>> + struct max8903_pdata *pdata = data->pdata;
>> bool ta_in;
>> enum power_supply_type old_type;
>>
>> @@ -122,7 +126,7 @@ static irqreturn_t max8903_dcin(int irq, void *_data)
>> static irqreturn_t max8903_usbin(int irq, void *_data)
>> {
>> struct max8903_data *data = _data;
>> - struct max8903_pdata *pdata = &data->pdata;
>> + struct max8903_pdata *pdata = data->pdata;
>> bool usb_in;
>> enum power_supply_type old_type;
>>
>> @@ -161,7 +165,7 @@ static irqreturn_t max8903_usbin(int irq, void *_data)
>> static irqreturn_t max8903_fault(int irq, void *_data)
>> {
>> struct max8903_data *data = _data;
>> - struct max8903_pdata *pdata = &data->pdata;
>> + struct max8903_pdata *pdata = data->pdata;
>> bool fault;
>>
>> fault = gpio_get_value(pdata->flt) ? false : true;
>> @@ -179,34 +183,135 @@ static irqreturn_t max8903_fault(int irq, void *_data)
>> return IRQ_HANDLED;
>> }
>>
>> +static struct max8903_pdata *max8903_parse_dt_data(
>> + struct device *dev)
>> +{
>> + struct device_node *of_node = dev->of_node;
>> + struct max8903_pdata *pdata = NULL;
>> +
>> + if (!of_node) {
>> + return pdata;
>> + }
>
> Run a scripts/checkpatch.pl. In general the {} are not needed for
> single statements.
>
>> +
>> + pdata = devm_kzalloc(dev, sizeof(struct max8903_pdata),
>> + GFP_KERNEL);
>> + if (!pdata) {
>> + return pdata;
>
> ditto
>
>> + }
>> +
>> + if (of_get_property(of_node, "dc_valid", NULL)) {
>> + pdata->dc_valid = true;
>> + }
>> +
>> + if (of_get_property(of_node, "usb_valid", NULL)) {
>> + pdata->usb_valid = true;
>> + }
>> +
>> + pdata->cen = of_get_named_gpio(of_node, "cen", 0);
>> + if (!gpio_is_valid(pdata->cen)) {
>> + pdata->cen = 0;
>> + }
>> +
>> + pdata->chg = of_get_named_gpio(of_node, "chg", 0);
>> + if (!gpio_is_valid(pdata->chg)) {
>> + pdata->chg = 0;
>> + }
>> +
>> + pdata->flt = of_get_named_gpio(of_node, "flt", 0);
>> + if (!gpio_is_valid(pdata->flt)) {
>> + pdata->flt = 0;
>> + }
>> +
>> + pdata->usus = of_get_named_gpio(of_node, "usus", 0);
>> + if (!gpio_is_valid(pdata->usus)) {
>> + pdata->usus = 0;
>> + }
>> +
>> + pdata->dcm = of_get_named_gpio(of_node, "dcm", 0);
>> + if (!gpio_is_valid(pdata->dcm)) {
>> + pdata->dcm = 0;
>> + }
>> +
>> + pdata->dok = of_get_named_gpio(of_node, "dok", 0);
>> + if (!gpio_is_valid(pdata->dok)) {
>> + pdata->dok = 0;
>> + }
>> +
>> + pdata->uok = of_get_named_gpio(of_node, "uok", 0);
>> + if (!gpio_is_valid(pdata->uok)) {
>> + pdata->uok = 0;
>> + }
>> +
>> + return pdata;
>> +}
>> +
>> static int max8903_probe(struct platform_device *pdev)
>> {
>> - struct max8903_data *data;
>> + struct max8903_data *charger;
>> struct device *dev = &pdev->dev;
>> - struct max8903_pdata *pdata = pdev->dev.platform_data;
>> struct power_supply_config psy_cfg = {};
>> int ret = 0;
>> int gpio;
>> int ta_in = 0;
>> int usb_in = 0;
>>
>> - data = devm_kzalloc(dev, sizeof(struct max8903_data), GFP_KERNEL);
>> - if (data == NULL) {
>> + charger = devm_kzalloc(dev, sizeof(struct max8903_data), GFP_KERNEL);
>> + if (charger == NULL) {
>> dev_err(dev, "Cannot allocate memory.\n");
>
> In a separate patch - you can get rid of error message.
>
> I didn't perform a thorough review. First fix some easy ones. :)
>
> Best regards,
> Krzysztof
>
next prev parent reply other threads:[~2016-06-10 5:35 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-02 6:44 [PATCH 0/2] max8903: Add device tree support and logic fixup chris
2016-06-02 6:44 ` [PATCH 1/2] max8903: adds support for initiation via device tree chris
2016-06-09 10:35 ` Krzysztof Kozlowski
2016-06-10 5:35 ` Chris Lapa [this message]
2016-06-10 6:13 ` Krzysztof Kozlowski
2016-06-10 10:23 ` Krzysztof Kozlowski
2016-06-02 6:44 ` [PATCH 2/2] max8903: cleans up confusing relationship between dc_valid, dok and dcm chris
2016-06-10 12:32 ` [PATCH v2 0/4] max8903: Add device tree support and logic fixup Chris Lapa
2016-06-10 12:32 ` [PATCH v2 1/4] max8903: adds documentation for device tree bindings Chris Lapa
2016-06-10 13:51 ` Krzysztof Kozlowski
2016-06-14 1:54 ` Chris Lapa
2016-06-16 6:35 ` Krzysztof Kozlowski
2016-06-16 6:48 ` Chris Lapa
2016-06-10 12:32 ` [PATCH v2 2/4] max8903: adds support for initiation via device tree Chris Lapa
2016-06-10 14:02 ` Krzysztof Kozlowski
2016-06-14 1:50 ` Chris Lapa
2016-06-10 12:32 ` [PATCH v2 3/4] max8903: cleans up confusing relationship between dc_valid, dok and dcm Chris Lapa
2016-06-10 12:32 ` [PATCH v2 4/4] max8903: remove unnecessary malloc failed message print out Chris Lapa
2016-06-10 14:08 ` Krzysztof Kozlowski
2016-06-17 5:00 ` [PATCH v3 0/7] max8903: Add device tree support and misc fixes Chris Lapa
2016-06-17 5:00 ` [PATCH v3 1/7] max8903: adds documentation for device tree bindings Chris Lapa
2016-06-17 6:15 ` Krzysztof Kozlowski
2016-06-20 13:22 ` Rob Herring
2016-06-20 23:43 ` Chris Lapa
2016-06-17 5:00 ` [PATCH v3 2/7] max8903: store pointer to pdata instead of copying it Chris Lapa
2016-06-17 6:14 ` Krzysztof Kozlowski
2016-06-17 5:00 ` [PATCH v3 3/7] max8903: cleans up confusing relationship between dc_valid, dok and dcm Chris Lapa
2016-06-17 6:23 ` Krzysztof Kozlowski
2016-06-17 6:26 ` Krzysztof Kozlowski
2016-06-17 6:28 ` Chris Lapa
2016-06-17 6:42 ` Krzysztof Kozlowski
2016-06-19 13:48 ` Chris Lapa
2016-06-17 5:00 ` [PATCH v3 4/7] max8903: adds requesting of gpios Chris Lapa
2016-06-17 6:30 ` Krzysztof Kozlowski
2016-06-19 13:51 ` Chris Lapa
2016-06-17 5:00 ` [PATCH v3 5/7] max8903: removes non zero validity checks on gpios Chris Lapa
2016-06-17 6:35 ` Krzysztof Kozlowski
2016-06-17 5:00 ` [PATCH v3 6/7] max8903: remove unnecessary 'out of memory' error message Chris Lapa
2016-06-17 6:35 ` Krzysztof Kozlowski
2016-06-17 5:00 ` [PATCH v3 7/7] max8903: adds support for initiation via device tree Chris Lapa
2016-06-17 6:41 ` Krzysztof Kozlowski
2016-06-19 13:52 ` Chris Lapa
2016-06-19 22:27 ` [PATCH v4 0/7] max8903: Add device tree support and misc fixes Chris Lapa
2016-06-19 22:27 ` [PATCH v4 1/7] max8903: adds documentation for device tree bindings Chris Lapa
2016-06-20 12:17 ` Krzysztof Kozlowski
2016-06-19 22:27 ` [PATCH v4 2/7] max8903: store pointer to pdata instead of copying it Chris Lapa
2016-06-20 12:18 ` Krzysztof Kozlowski
2016-06-19 22:27 ` [PATCH v4 3/7] max8903: cleans up confusing relationship between dc_valid, dok and dcm Chris Lapa
2016-06-20 12:18 ` Krzysztof Kozlowski
2016-06-19 22:27 ` [PATCH v4 4/7] max8903: adds requesting of gpios Chris Lapa
2016-06-20 12:20 ` Krzysztof Kozlowski
2016-06-19 22:27 ` [PATCH v4 5/7] max8903: removes non zero validity checks on gpios Chris Lapa
2016-06-20 12:21 ` Krzysztof Kozlowski
2016-06-19 22:27 ` [PATCH v4 6/7] max8903: remove unnecessary 'out of memory' error message Chris Lapa
2016-06-20 12:22 ` Krzysztof Kozlowski
2016-06-19 22:27 ` [PATCH v4 7/7] max8903: adds support for initiation via device tree Chris Lapa
2016-06-20 12:23 ` Krzysztof Kozlowski
2016-06-24 2:26 ` [PATCH v5 0/7] max8903: Add device tree support and misc fixes Chris Lapa
2016-06-24 2:26 ` [PATCH v5 1/7] max8903: adds documentation for device tree bindings Chris Lapa
2016-06-28 20:55 ` Rob Herring
2016-06-24 2:26 ` [PATCH v5 2/7] max8903: store pointer to pdata instead of copying it Chris Lapa
2016-06-24 2:26 ` [PATCH v5 3/7] max8903: cleans up confusing relationship between dc_valid, dok and dcm Chris Lapa
2016-06-24 2:26 ` [PATCH v5 4/7] max8903: adds requesting of gpios Chris Lapa
2016-06-24 2:26 ` [PATCH v5 5/7] max8903: removes non zero validity checks on gpios Chris Lapa
2016-06-24 2:26 ` [PATCH v5 6/7] max8903: remove unnecessary 'out of memory' error message Chris Lapa
2016-06-24 2:26 ` [PATCH v5 7/7] max8903: adds support for initiation via device tree Chris Lapa
2016-06-28 18:16 ` [PATCH v5 0/7] max8903: Add device tree support and misc fixes Sebastian Reichel
2016-06-28 23:05 ` Chris Lapa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=98c757cd-d1b4-1599-ebb3-2a9cc3fc478d@lapa.com.au \
--to=chris@lapa.com.au \
--cc=k.kozlowski@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).