* Re: PROBLEM: frame-buffer doesn't work on HP Vectra with Ma
@ 2001-02-27 12:47 Petr Vandrovec
0 siblings, 0 replies; only message in thread
From: Petr Vandrovec @ 2001-02-27 12:47 UTC (permalink / raw)
To: Dmitry B. Tsvetkov; +Cc: linux-kernel
On 27 Feb 01 at 12:41, Dmitry B. Tsvetkov wrote:
> Description: after switching to VGA mode all messages appeared like
> dots and lines over HP Bios logo screen, only penguin logo looks
> normal (on previous 2.4.0 and 2.4.1 kernels it was shown using wrong
> colors or unvisible, but all fonts was shown normally).
>
> Computers: HP Vectra VE6 series 8, Matrox G100
> HP Vectra VLi 8, Matrox G200
Are you sure you did not enable vesafb + matroxfb or vga16fb + matroxfb
together? Boot Linux, and then post contents of /proc/fb to us.
If it contains anything else than '0 MATROX VGA', you misconfigured
your kernel.
Petr Vandrovec
vandrove@vc.cvut.cz
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-02-27 11:49 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-02-27 12:47 PROBLEM: frame-buffer doesn't work on HP Vectra with Ma Petr Vandrovec
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).