* [PATCH 2/2] arm64: defconfig: enable MFD RK808 and RK808 regulator
2016-09-07 11:46 [PATCH 1/2] arm64: defconfig: enable I2C and DW MMC controller on rockchip platform Andy Yan
@ 2016-09-07 11:50 ` Andy Yan
2016-11-17 16:03 ` Heiko Stuebner
2016-09-19 10:10 ` [PATCH 1/2] arm64: defconfig: enable I2C and DW MMC controller on rockchip platform Andy Yan
` (2 subsequent siblings)
3 siblings, 1 reply; 6+ messages in thread
From: Andy Yan @ 2016-09-07 11:50 UTC (permalink / raw)
To: arnd
Cc: srinivas.kandagatla, treding, kuninori.morimoto.gx, alim.akhtar,
linux-kernel, krzk, will.deacon, catalin.marinas, riku.voipio,
linux-arm-kernel, horms+renesas, shawn.lin, Andy Yan
Many rockchip based arm64 boards use RK808 as PMIC, so
enabe it here let the board bootup normally.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 427b6dc..4b61ed9 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -258,6 +258,7 @@ CONFIG_WATCHDOG=y
CONFIG_RENESAS_WDT=y
CONFIG_S3C2410_WATCHDOG=y
CONFIG_MFD_MAX77620=y
+CONFIG_MFD_RK808=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_HI655X_PMIC=y
@@ -270,6 +271,7 @@ CONFIG_REGULATOR_MAX77620=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_QCOM_SMD_RPM=y
CONFIG_REGULATOR_QCOM_SPMI=y
+CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_DRM=m
CONFIG_DRM_NOUVEAU=m
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 2/2] arm64: defconfig: enable MFD RK808 and RK808 regulator
2016-09-07 11:50 ` [PATCH 2/2] arm64: defconfig: enable MFD RK808 and RK808 regulator Andy Yan
@ 2016-11-17 16:03 ` Heiko Stuebner
0 siblings, 0 replies; 6+ messages in thread
From: Heiko Stuebner @ 2016-11-17 16:03 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Andy Yan, arnd, kuninori.morimoto.gx, catalin.marinas,
riku.voipio, will.deacon, linux-kernel, krzk,
srinivas.kandagatla, alim.akhtar, horms+renesas, treding,
shawn.lin
Am Mittwoch, 7. September 2016, 19:50:28 CET schrieb Andy Yan:
> Many rockchip based arm64 boards use RK808 as PMIC, so
> enabe it here let the board bootup normally.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
applied to a defconfig64 branch after adding rk808-rtc as module and rk808-clk
output as builtin as well.
Thanks
Heiko
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] arm64: defconfig: enable I2C and DW MMC controller on rockchip platform
2016-09-07 11:46 [PATCH 1/2] arm64: defconfig: enable I2C and DW MMC controller on rockchip platform Andy Yan
2016-09-07 11:50 ` [PATCH 2/2] arm64: defconfig: enable MFD RK808 and RK808 regulator Andy Yan
@ 2016-09-19 10:10 ` Andy Yan
2016-11-03 11:06 ` Andy Yan
2016-11-17 15:55 ` Heiko Stuebner
3 siblings, 0 replies; 6+ messages in thread
From: Andy Yan @ 2016-09-19 10:10 UTC (permalink / raw)
To: arnd, treding, shawn.lin, Heiko Stübner
Cc: srinivas.kandagatla, kuninori.morimoto.gx, alim.akhtar,
linux-kernel, krzk, will.deacon, catalin.marinas, riku.voipio,
linux-arm-kernel, horms+renesas
Hi :
Respected maintainers, is there some suggestions for this patch?
On 2016年09月07日 19:46, Andy Yan wrote:
> I2C and MMC are very basic modules for a board to bootup, as I2C always
> used to configure PMIC and MMC devices often used to store filesytem.
> So enable them here to let the rockchip based arm64 boards can bootup.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> ---
>
> arch/arm64/configs/defconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index eadf485..427b6dc 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -222,6 +222,7 @@ CONFIG_I2C_QUP=y
> CONFIG_I2C_TEGRA=y
> CONFIG_I2C_UNIPHIER_F=y
> CONFIG_I2C_RCAR=y
> +CONFIG_I2C_RK3X=y
> CONFIG_I2C_CROS_EC_TUNNEL=y
> CONFIG_SPI=y
> CONFIG_SPI_ORION=y
> @@ -323,6 +324,7 @@ CONFIG_MMC_SPI=y
> CONFIG_MMC_DW=y
> CONFIG_MMC_DW_EXYNOS=y
> CONFIG_MMC_DW_K3=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> CONFIG_MMC_SUNXI=y
> CONFIG_NEW_LEDS=y
> CONFIG_LEDS_CLASS=y
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] arm64: defconfig: enable I2C and DW MMC controller on rockchip platform
2016-09-07 11:46 [PATCH 1/2] arm64: defconfig: enable I2C and DW MMC controller on rockchip platform Andy Yan
2016-09-07 11:50 ` [PATCH 2/2] arm64: defconfig: enable MFD RK808 and RK808 regulator Andy Yan
2016-09-19 10:10 ` [PATCH 1/2] arm64: defconfig: enable I2C and DW MMC controller on rockchip platform Andy Yan
@ 2016-11-03 11:06 ` Andy Yan
2016-11-17 15:55 ` Heiko Stuebner
3 siblings, 0 replies; 6+ messages in thread
From: Andy Yan @ 2016-11-03 11:06 UTC (permalink / raw)
To: arnd, Heiko Stübner
Cc: srinivas.kandagatla, treding, kuninori.morimoto.gx, alim.akhtar,
linux-kernel, krzk, will.deacon, catalin.marinas, riku.voipio,
linux-arm-kernel, horms+renesas, shawn.lin
Ping
On 2016年09月07日 19:46, Andy Yan wrote:
> I2C and MMC are very basic modules for a board to bootup, as I2C always
> used to configure PMIC and MMC devices often used to store filesytem.
> So enable them here to let the rockchip based arm64 boards can bootup.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> ---
>
> arch/arm64/configs/defconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index eadf485..427b6dc 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -222,6 +222,7 @@ CONFIG_I2C_QUP=y
> CONFIG_I2C_TEGRA=y
> CONFIG_I2C_UNIPHIER_F=y
> CONFIG_I2C_RCAR=y
> +CONFIG_I2C_RK3X=y
> CONFIG_I2C_CROS_EC_TUNNEL=y
> CONFIG_SPI=y
> CONFIG_SPI_ORION=y
> @@ -323,6 +324,7 @@ CONFIG_MMC_SPI=y
> CONFIG_MMC_DW=y
> CONFIG_MMC_DW_EXYNOS=y
> CONFIG_MMC_DW_K3=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> CONFIG_MMC_SUNXI=y
> CONFIG_NEW_LEDS=y
> CONFIG_LEDS_CLASS=y
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] arm64: defconfig: enable I2C and DW MMC controller on rockchip platform
2016-09-07 11:46 [PATCH 1/2] arm64: defconfig: enable I2C and DW MMC controller on rockchip platform Andy Yan
` (2 preceding siblings ...)
2016-11-03 11:06 ` Andy Yan
@ 2016-11-17 15:55 ` Heiko Stuebner
3 siblings, 0 replies; 6+ messages in thread
From: Heiko Stuebner @ 2016-11-17 15:55 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Andy Yan, arnd, kuninori.morimoto.gx, catalin.marinas,
riku.voipio, will.deacon, linux-kernel, krzk,
srinivas.kandagatla, alim.akhtar, horms+renesas, treding,
shawn.lin
Am Mittwoch, 7. September 2016, 19:46:30 CET schrieb Andy Yan:
> I2C and MMC are very basic modules for a board to bootup, as I2C always
> used to configure PMIC and MMC devices often used to store filesytem.
> So enable them here to let the rockchip based arm64 boards can bootup.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
applied to a defconfig64 branch, after moving I2C_RK3X between QUP and TEGRA
RCAR seems to be an exception to the otherwise alphabetically sorted list.
Heiko
^ permalink raw reply [flat|nested] 6+ messages in thread