Re: [alsa-devel] [PATCH 07/14] soundwire: add initial definitions for sdw_master_device

[Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>]

On 11/3/19 1:30 AM, Vinod Koul wrote:
> On 23-10-19, 16:28, Pierre-Louis Bossart wrote:
>> Since we want an explicit support for the SoundWire Master device, add
>> the definitions, following the Grey Bus example.
>>
>> Open: do we need to set a variable when dealing with the master uevent?
> 
> I dont think we want that or we need that!

In GreyBus there are events and variables set, not sure what they were 
used for. The code works without setting an event, but we'd need to make 
a conscious design decision, and I am not too sure what usersace would 
use the informatio for.

> 
> And to prevent that rather than adding a variable, can you please
> modify the device_type and use separate ones for master_device and
> slave_device

sorry, I don't get the comment. There is only already a different device 
type


struct bus_type sdw_bus_type = {
	.name = "soundwire",
	.match = sdw_bus_match,
	.uevent = sdw_uevent,
};

struct device_type sdw_slave_type = {
	.name =		"sdw_slave",
	.release =	sdw_slave_release,
};

struct device_type sdw_md_type = {
	.name =		"soundwire_master",
	.release =	sdw_md_release,
};

> 
>>
>> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
>> ---
>>   drivers/soundwire/Makefile         |  2 +-
>>   drivers/soundwire/bus_type.c       | 16 +++++---
>>   drivers/soundwire/master.c         | 62 ++++++++++++++++++++++++++++++
>>   include/linux/soundwire/sdw.h      | 35 +++++++++++++++++
>>   include/linux/soundwire/sdw_type.h |  9 +++++
>>   5 files changed, 117 insertions(+), 7 deletions(-)
>>   create mode 100644 drivers/soundwire/master.c
>>
>> diff --git a/drivers/soundwire/Makefile b/drivers/soundwire/Makefile
>> index 563894e5ecaf..89b29819dd3a 100644
>> --- a/drivers/soundwire/Makefile
>> +++ b/drivers/soundwire/Makefile
>> @@ -4,7 +4,7 @@
>>   #
>>   
>>   #Bus Objs
>> -soundwire-bus-objs := bus_type.o bus.o slave.o mipi_disco.o stream.o
>> +soundwire-bus-objs := bus_type.o bus.o master.o slave.o mipi_disco.o stream.o
>>   obj-$(CONFIG_SOUNDWIRE) += soundwire-bus.o
>>   
>>   ifdef CONFIG_DEBUG_FS
>> diff --git a/drivers/soundwire/bus_type.c b/drivers/soundwire/bus_type.c
>> index 5df095f4e12f..cf33f63773f0 100644
>> --- a/drivers/soundwire/bus_type.c
>> +++ b/drivers/soundwire/bus_type.c
>> @@ -49,21 +49,25 @@ int sdw_slave_modalias(const struct sdw_slave *slave, char *buf, size_t size)
>>   
>>   static int sdw_uevent(struct device *dev, struct kobj_uevent_env *env)
>>   {
>> +	struct sdw_master_device *md;
>>   	struct sdw_slave *slave;
>>   	char modalias[32];
>>   
>> -	if (is_sdw_slave(dev)) {
>> +	if (is_sdw_md(dev)) {
>> +		md = to_sdw_master_device(dev);
> 
> md seems unused?

well, yes, its use depends on whether we need to call add_event_var() as 
asked below

> 
>> +		/* TODO: do we need to call add_uevent_var() ? */
>> +	} else if (is_sdw_slave(dev)) {
>>   		slave = to_sdw_slave_device(dev);
>> +
>> +		sdw_slave_modalias(slave, modalias, sizeof(modalias));
>> +
>> +		if (add_uevent_var(env, "MODALIAS=%s", modalias))
>> +			return -ENOMEM;
>>   	} else {
>>   		dev_warn(dev, "uevent for unknown Soundwire type\n");
>>   		return -EINVAL;
>>   	}
>>   
>> -	sdw_slave_modalias(slave, modalias, sizeof(modalias));
>> -
>> -	if (add_uevent_var(env, "MODALIAS=%s", modalias))
>> -		return -ENOMEM;
>> -
>>   	return 0;
>>   }
>>   
>> diff --git a/drivers/soundwire/master.c b/drivers/soundwire/master.c
>> new file mode 100644
>> index 000000000000..6210098c892b
>> --- /dev/null
>> +++ b/drivers/soundwire/master.c
>> @@ -0,0 +1,62 @@
>> +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
>> +// Copyright(c) 2019 Intel Corporation.
>> +
>> +#include <linux/device.h>
>> +#include <linux/acpi.h>
>> +#include <linux/soundwire/sdw.h>
>> +#include <linux/soundwire/sdw_type.h>
>> +#include "bus.h"
>> +
>> +static void sdw_md_release(struct device *dev)
>> +{
>> +	struct sdw_master_device *md = to_sdw_master_device(dev);
>> +
>> +	kfree(md);
>> +}
>> +
>> +struct device_type sdw_md_type = {
>> +	.name =		"soundwire_master",
>> +	.release =	sdw_md_release,
>> +};
>> +
>> +struct sdw_master_device *sdw_md_add(struct sdw_md_driver *driver,
>> +				     struct device *parent,
>> +				     struct fwnode_handle *fwnode,
>> +				     int link_id)
>> +{
>> +	struct sdw_master_device *md;
>> +	int ret;
>> +
>> +	if (!driver->probe) {
>> +		dev_err(parent, "mandatory probe callback missing\n");
>> +		return ERR_PTR(-EINVAL);
>> +	}
>> +
>> +	md = kzalloc(sizeof(*md), GFP_KERNEL);
>> +	if (!md)
>> +		return ERR_PTR(-ENOMEM);
>> +
>> +	md->link_id = link_id;
>> +
>> +	md->driver = driver;
>> +
>> +	md->dev.parent = parent;
>> +	md->dev.fwnode = fwnode;
>> +	md->dev.bus = &sdw_bus_type;
>> +	md->dev.type = &sdw_md_type;
>> +	md->dev.dma_mask = md->dev.parent->dma_mask;
>> +	dev_set_name(&md->dev, "sdw-master-%d", md->link_id);
>> +
>> +	ret = device_register(&md->dev);
>> +	if (ret) {
>> +		dev_err(parent, "Failed to add master: ret %d\n", ret);
>> +		/*
>> +		 * On err, don't free but drop ref as this will be freed
>> +		 * when release method is invoked.
>> +		 */
>> +		put_device(&md->dev);
>> +	}
>> +
>> +	return md;
>> +}
>> +EXPORT_SYMBOL(sdw_md_add);
>> diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
>> index d6e5a0e42819..6f8b6a0cbcb7 100644
>> --- a/include/linux/soundwire/sdw.h
>> +++ b/include/linux/soundwire/sdw.h
>> @@ -573,6 +573,16 @@ struct sdw_slave {
>>   #define to_sdw_slave_device(d) \
>>   	container_of(d, struct sdw_slave, dev)
>>   
>> +struct sdw_master_device {
>> +	struct device dev;
>> +	int link_id;
>> +	struct sdw_md_driver *driver;
>> +	void *pdata; /* core does not touch */
> 
> what is the use for this, also please add kernel-doc style comments for
> core structs
> 
>> +};
>> +
>> +#define to_sdw_master_device(d)	\
>> +	container_of(d, struct sdw_master_device, dev)
>> +
>>   struct sdw_driver {
>>   	const char *name;
>>   
>> @@ -587,6 +597,26 @@ struct sdw_driver {
>>   	struct device_driver driver;
>>   };
>>   
>> +struct sdw_md_driver {
>> +	/* initializations and allocations */
>> +	int (*probe)(struct sdw_master_device *md, void *link_ctx);
>> +	/* hardware enablement, all clock/power dependencies are available */
>> +	int (*startup)(struct sdw_master_device *md);
>> +	/* hardware disabled */
>> +	int (*shutdown)(struct sdw_master_device *md);
>> +	/* free all resources */
>> +	int (*remove)(struct sdw_master_device *md);
>> +	/*
>> +	 * enable/disable driver control while in clock-stop mode,
>> +	 * typically in always-on/D0ix modes. When the driver yields
>> +	 * control, another entity in the system (typically firmware
>> +	 * running on an always-on microprocessor) is responsible to
>> +	 * tracking Slave-initiated wakes
>> +	 */
>> +	int (*autonomous_clock_stop_enable)(struct sdw_master_device *md,
>> +					    bool state);
>> +};
>> +
>>   #define SDW_SLAVE_ENTRY(_mfg_id, _part_id, _drv_data) \
>>   	{ .mfg_id = (_mfg_id), .part_id = (_part_id), \
>>   	  .driver_data = (unsigned long)(_drv_data) }
>> @@ -776,6 +806,11 @@ struct sdw_bus {
>>   int sdw_add_bus_master(struct sdw_bus *bus);
>>   void sdw_delete_bus_master(struct sdw_bus *bus);
>>   
>> +struct sdw_master_device *sdw_md_add(struct sdw_md_driver *driver,
>> +				     struct device *parent,
>> +				     struct fwnode_handle *fwnode,
>> +				     int link_id);
>> +
>>   /**
>>    * sdw_port_config: Master or Slave Port configuration
>>    *
>> diff --git a/include/linux/soundwire/sdw_type.h b/include/linux/soundwire/sdw_type.h
>> index c681b3426478..463d6d018d56 100644
>> --- a/include/linux/soundwire/sdw_type.h
>> +++ b/include/linux/soundwire/sdw_type.h
>> @@ -6,15 +6,24 @@
>>   
>>   extern struct bus_type sdw_bus_type;
>>   extern struct device_type sdw_slave_type;
>> +extern struct device_type sdw_md_type;
>>   
>>   static inline int is_sdw_slave(const struct device *dev)
>>   {
>>   	return dev->type == &sdw_slave_type;
>>   }
>>   
>> +static inline int is_sdw_md(const struct device *dev)
>> +{
>> +	return dev->type == &sdw_md_type;
>> +}
>> +
>>   #define to_sdw_slave_driver(_drv) \
>>   	container_of(_drv, struct sdw_driver, driver)
>>   
>> +#define to_sdw_md_driver(_drv) \
>> +	container_of(_drv, struct sdw_md_driver, driver)
>> +
>>   #define sdw_register_slave_driver(drv) \
>>   	__sdw_register_slave_driver(drv, THIS_MODULE)
>>   
>> -- 
>> 2.20.1
>