* PROBLEM: 5.6.0-rc6 + Realtek RTL8188CUS wifi dongle: 8051 reset failed!
@ 2020-03-17 6:44 AC
2020-03-17 14:52 ` Larry Finger
0 siblings, 1 reply; 3+ messages in thread
From: AC @ 2020-03-17 6:44 UTC (permalink / raw)
To: Ping-Ke Shih, Jes Sorensen, linux-wireless; +Cc: kernel list
I am on Debian 10.3 stable i386, running a custom-compiled kernel (I compile weekly, when new rc releases drop).
I keep the following USB wifi dongle connected to this machine:
ID 050d:1102 Belkin Components F7D1102 N150/Surf Micro Wireless Adapter v1000 [Realtek RTL8188CUS]
---
The problem:
As of 5.6.0-rc6, booting up with the dongle connected returns a number of dmesg complaints:
--- cut here ---
[ 9.448337] rtl8192cu: MAC auto ON okay! [ 9.579025] rtl8192cu: Tx queue select: 0x05 [ 10.475308] rtl8192c_common: Polling FW ready fail! REG_MCUFWDL:0x00030006. [ 10.478213] rtl8192c_common: Firmware is not ready to run! [ 10.960093] rtl8192cu: 8051 reset failed!......................... [ 10.971027] rtl8192cu: MAC auto ON okay! [ 11.101691] rtl8192cu: Tx queue select: 0x05
--- end ---
Occasionally, this results in a timeout while trying to reach network.target (systemd).
Afterwards, there's endless dmesg noise Re: rtl8192cu:
--- cut here ---
[11391.204555] rtl8192cu: Tx queue select: 0x05 [11707.050480] rtl8192cu: MAC auto ON okay! [11707.181118] rtl8192cu: Tx queue select: 0x05 [12023.057056] rtl8192cu: MAC auto ON okay! [12023.187727] rtl8192cu: Tx queue select: 0x05
[12339.060183] rtl8192cu: MAC auto ON okay! [12339.199316] rtl8192cu: Tx queue select: 0x05 [12655.054140] rtl8192cu: MAC auto ON okay! [12655.184789] rtl8192cu: Tx queue select: 0x05 [12971.053948] rtl8192cu: MAC auto ON okay! [12971.184600] rtl8192cu: Tx queue select: 0x05 [13287.062712] rtl8192cu: MAC auto ON okay! [13287.193363] rtl8192cu: Tx queue select: 0x05 [13603.065987] rtl8192cu: MAC auto ON okay! [13603.196641] rtl8192cu: Tx queue select: 0x05 [13919.066617] rtl8192cu: MAC auto ON okay! [13919.197270] rtl8192cu: Tx queue select: 0x05 [14235.060621] rtl8192cu: MAC auto ON okay! [14235.191277] rtl8192cu: Tx queue select: 0x05 [14551.055104] rtl8192cu: MAC auto ON okay! [14551.185741] rtl8192cu: Tx queue select: 0x05 [14867.051799] rtl8192cu: MAC auto ON okay! [14867.182451] rtl8192cu: Tx queue select: 0x05 [14878.855070] perf: interrupt took too long (7897 > 7896), lowering kernel.perf_event_max_sample_rate to 25250
--- end ---
There are large swaths of this in dmesg.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: PROBLEM: 5.6.0-rc6 + Realtek RTL8188CUS wifi dongle: 8051 reset failed!
2020-03-17 6:44 PROBLEM: 5.6.0-rc6 + Realtek RTL8188CUS wifi dongle: 8051 reset failed! AC
@ 2020-03-17 14:52 ` Larry Finger
2020-03-17 16:03 ` AC
0 siblings, 1 reply; 3+ messages in thread
From: Larry Finger @ 2020-03-17 14:52 UTC (permalink / raw)
To: AC, Ping-Ke Shih, Jes Sorensen, linux-wireless; +Cc: kernel list
On 3/17/20 1:44 AM, AC wrote:
> I am on Debian 10.3 stable i386, running a custom-compiled kernel (I compile weekly, when new rc releases drop).
>
> I keep the following USB wifi dongle connected to this machine:
>
> ID 050d:1102 Belkin Components F7D1102 N150/Surf Micro Wireless Adapter v1000 [Realtek RTL8188CUS]
>
>
> ---
>
> The problem:
>
> As of 5.6.0-rc6, booting up with the dongle connected returns a number of dmesg complaints:
>
> --- cut here ---
>
> [ 9.448337] rtl8192cu: MAC auto ON okay! [ 9.579025] rtl8192cu: Tx queue select: 0x05 [ 10.475308] rtl8192c_common: Polling FW ready fail! REG_MCUFWDL:0x00030006. [ 10.478213] rtl8192c_common: Firmware is not ready to run! [ 10.960093] rtl8192cu: 8051 reset failed!......................... [ 10.971027] rtl8192cu: MAC auto ON okay! [ 11.101691] rtl8192cu: Tx queue select: 0x05
>
> --- end ---
>
> Occasionally, this results in a timeout while trying to reach network.target (systemd).
>
> Afterwards, there's endless dmesg noise Re: rtl8192cu:
>
> --- cut here ---
>
> [11391.204555] rtl8192cu: Tx queue select: 0x05 [11707.050480] rtl8192cu: MAC auto ON okay! [11707.181118] rtl8192cu: Tx queue select: 0x05 [12023.057056] rtl8192cu: MAC auto ON okay! [12023.187727] rtl8192cu: Tx queue select: 0x05
> [12339.060183] rtl8192cu: MAC auto ON okay! [12339.199316] rtl8192cu: Tx queue select: 0x05 [12655.054140] rtl8192cu: MAC auto ON okay! [12655.184789] rtl8192cu: Tx queue select: 0x05 [12971.053948] rtl8192cu: MAC auto ON okay! [12971.184600] rtl8192cu: Tx queue select: 0x05 [13287.062712] rtl8192cu: MAC auto ON okay! [13287.193363] rtl8192cu: Tx queue select: 0x05 [13603.065987] rtl8192cu: MAC auto ON okay! [13603.196641] rtl8192cu: Tx queue select: 0x05 [13919.066617] rtl8192cu: MAC auto ON okay! [13919.197270] rtl8192cu: Tx queue select: 0x05 [14235.060621] rtl8192cu: MAC auto ON okay! [14235.191277] rtl8192cu: Tx queue select: 0x05 [14551.055104] rtl8192cu: MAC auto ON okay! [14551.185741] rtl8192cu: Tx queue select: 0x05 [14867.051799] rtl8192cu: MAC auto ON okay! [14867.182451] rtl8192cu: Tx queue select: 0x05 [14878.855070] perf: interrupt took too long (7897 > 7896), lowering kernel.perf_event_max_sample_rate to 25250
Please bisect this problem. No one else has reported it, thus it may depend on
some specific configuration of your system.
Was 5.6.0-rc5 OK?
Larry
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: PROBLEM: 5.6.0-rc6 + Realtek RTL8188CUS wifi dongle: 8051 reset failed!
2020-03-17 14:52 ` Larry Finger
@ 2020-03-17 16:03 ` AC
0 siblings, 0 replies; 3+ messages in thread
From: AC @ 2020-03-17 16:03 UTC (permalink / raw)
To: Larry Finger, Ping-Ke Shih, Jes Sorensen, linux-wireless; +Cc: kernel list
On March 17, 2020 10:52:14 AM EDT, Larry Finger <Larry.Finger@lwfinger.net> wrote:
>
>Please bisect this problem. No one else has reported it, thus it may
>depend on
>some specific configuration of your system.
>
I will try.
>Was 5.6.0-rc5 OK?
>
rc5 showed the same dmesg noise.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-03-17 16:03 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-17 6:44 PROBLEM: 5.6.0-rc6 + Realtek RTL8188CUS wifi dongle: 8051 reset failed! AC
2020-03-17 14:52 ` Larry Finger
2020-03-17 16:03 ` AC
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).