[PATCH] PCI: Reset IOV state on FLR to PF

[PATCH] PCI: Reset IOV state on FLR to PF

[Lukasz Maniak]

As per PCI Express specification, FLR to a PF resets the PF state as
well as the SR-IOV extended capability including VF Enable which means
that VFs no longer exist.

Currently, the IOV state is not updated during FLR, resulting in
non-compliant PCI driver behavior.

This patch introduces a simple function, called on the FLR path, that
removes the virtual function devices from the PCI bus and their
corresponding sysfs links with a final clear of the num_vfs value in IOV
state.

Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
---
 drivers/pci/iov.c | 21 +++++++++++++++++++++
 drivers/pci/pci.c |  2 ++
 drivers/pci/pci.h |  4 ++++
 3 files changed, 27 insertions(+)

diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 0267977c9f17..69ee321027b4 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -1013,6 +1013,27 @@ int pci_iov_bus_range(struct pci_bus *bus)
 	return max ? max - bus->number : 0;
 }
 
+/**
+ * pci_reset_iov_state - reset the state of the IOV capability
+ * @dev: the PCI device
+ */
+void pci_reset_iov_state(struct pci_dev *dev)
+{
+	struct pci_sriov *iov = dev->sriov;
+
+	if (!dev->is_physfn)
+		return;
+	if (!iov->num_VFs)
+		return;
+
+	sriov_del_vfs(dev);
+
+	if (iov->link != dev->devfn)
+		sysfs_remove_link(&dev->dev.kobj, "dep_link");
+
+	iov->num_VFs = 0;
+}
+
 /**
  * pci_enable_sriov - enable the SR-IOV capability
  * @dev: the PCI device
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 3d2fb394986a..535f19d37e8d 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -4694,6 +4694,8 @@ EXPORT_SYMBOL(pci_wait_for_pending_transaction);
  */
 int pcie_flr(struct pci_dev *dev)
 {
+	pci_reset_iov_state(dev);
+
 	if (!pci_wait_for_pending_transaction(dev))
 		pci_err(dev, "timed out waiting for pending transaction; performing function level reset anyway\n");
 
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 3d60cabde1a1..7bb144fbec76 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -480,6 +480,7 @@ void pci_iov_update_resource(struct pci_dev *dev, int resno);
 resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
 void pci_restore_iov_state(struct pci_dev *dev);
 int pci_iov_bus_range(struct pci_bus *bus);
+void pci_reset_iov_state(struct pci_dev *dev);
 extern const struct attribute_group sriov_pf_dev_attr_group;
 extern const struct attribute_group sriov_vf_dev_attr_group;
 #else
@@ -501,6 +502,9 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
 {
 	return 0;
 }
+static inline void pci_reset_iov_state(struct pci_dev *dev)
+{
+}
 
 #endif /* CONFIG_PCI_IOV */
 

base-commit: fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf
-- 
2.25.1

Re: [PATCH] PCI: Reset IOV state on FLR to PF

[Bjorn Helgaas]

On Wed, Dec 22, 2021 at 08:19:57PM +0100, Lukasz Maniak wrote:
> As per PCI Express specification, FLR to a PF resets the PF state as
> well as the SR-IOV extended capability including VF Enable which means
> that VFs no longer exist.

Can you add a specific reference to the spec, please?

> Currently, the IOV state is not updated during FLR, resulting in
> non-compliant PCI driver behavior.

And include a little detail about what problem is observed?  How would
a user know this problem is occurring?

> This patch introduces a simple function, called on the FLR path, that
> removes the virtual function devices from the PCI bus and their
> corresponding sysfs links with a final clear of the num_vfs value in IOV
> state.
> 
> Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
> ---
>  drivers/pci/iov.c | 21 +++++++++++++++++++++
>  drivers/pci/pci.c |  2 ++
>  drivers/pci/pci.h |  4 ++++
>  3 files changed, 27 insertions(+)
> 
> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> index 0267977c9f17..69ee321027b4 100644
> --- a/drivers/pci/iov.c
> +++ b/drivers/pci/iov.c
> @@ -1013,6 +1013,27 @@ int pci_iov_bus_range(struct pci_bus *bus)
>  	return max ? max - bus->number : 0;
>  }
>  
> +/**
> + * pci_reset_iov_state - reset the state of the IOV capability
> + * @dev: the PCI device
> + */
> +void pci_reset_iov_state(struct pci_dev *dev)
> +{
> +	struct pci_sriov *iov = dev->sriov;
> +
> +	if (!dev->is_physfn)
> +		return;
> +	if (!iov->num_VFs)
> +		return;
> +
> +	sriov_del_vfs(dev);
> +
> +	if (iov->link != dev->devfn)
> +		sysfs_remove_link(&dev->dev.kobj, "dep_link");
> +
> +	iov->num_VFs = 0;
> +}
> +
>  /**
>   * pci_enable_sriov - enable the SR-IOV capability
>   * @dev: the PCI device
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 3d2fb394986a..535f19d37e8d 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -4694,6 +4694,8 @@ EXPORT_SYMBOL(pci_wait_for_pending_transaction);
>   */
>  int pcie_flr(struct pci_dev *dev)
>  {
> +	pci_reset_iov_state(dev);
> +
>  	if (!pci_wait_for_pending_transaction(dev))
>  		pci_err(dev, "timed out waiting for pending transaction; performing function level reset anyway\n");
>  
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index 3d60cabde1a1..7bb144fbec76 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -480,6 +480,7 @@ void pci_iov_update_resource(struct pci_dev *dev, int resno);
>  resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
>  void pci_restore_iov_state(struct pci_dev *dev);
>  int pci_iov_bus_range(struct pci_bus *bus);
> +void pci_reset_iov_state(struct pci_dev *dev);
>  extern const struct attribute_group sriov_pf_dev_attr_group;
>  extern const struct attribute_group sriov_vf_dev_attr_group;
>  #else
> @@ -501,6 +502,9 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
>  {
>  	return 0;
>  }
> +static inline void pci_reset_iov_state(struct pci_dev *dev)
> +{
> +}
>  
>  #endif /* CONFIG_PCI_IOV */
>  
> 
> base-commit: fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf
> -- 
> 2.25.1
> 

Re: [PATCH] PCI: Reset IOV state on FLR to PF

[Lukasz Maniak]

On Wed, Jan 12, 2022 at 08:49:03AM -0600, Bjorn Helgaas wrote:
> On Wed, Dec 22, 2021 at 08:19:57PM +0100, Lukasz Maniak wrote:
> > As per PCI Express specification, FLR to a PF resets the PF state as
> > well as the SR-IOV extended capability including VF Enable which means
> > that VFs no longer exist.
> 
> Can you add a specific reference to the spec, please?
> 
Following the Single Root I/O Virtualization and Sharing Specification:
2.2.3. FLR That Targets a PF
PFs must support FLR.
FLR to a PF resets the PF state as well as the SR-IOV extended
capability including VF Enable which means that VFs no longer exist.

For PCI Express Base Specification Revision 5.0 and later, this is
section 9.2.2.3.

> > Currently, the IOV state is not updated during FLR, resulting in
> > non-compliant PCI driver behavior.
> 
> And include a little detail about what problem is observed?  How would
> a user know this problem is occurring?
> 
The problem is that the state of the kernel and HW as to the number of
VFs gets out of sync after FLR.

This results in further listing, after the FLR is performed by the HW,
of VFs that actually no longer exist and should no longer be reported on
the PCI bus. lspci return FFs for these VFs.

sriov_numvfs in sysfs returns old invalid value and does not allow
setting a new value before explicitly setting 0 in the first place.

> > This patch introduces a simple function, called on the FLR path, that
> > removes the virtual function devices from the PCI bus and their
> > corresponding sysfs links with a final clear of the num_vfs value in IOV
> > state.
> > 
> > Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
> > ---
> >  drivers/pci/iov.c | 21 +++++++++++++++++++++
> >  drivers/pci/pci.c |  2 ++
> >  drivers/pci/pci.h |  4 ++++
> >  3 files changed, 27 insertions(+)
> > 
> > diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> > index 0267977c9f17..69ee321027b4 100644
> > --- a/drivers/pci/iov.c
> > +++ b/drivers/pci/iov.c
> > @@ -1013,6 +1013,27 @@ int pci_iov_bus_range(struct pci_bus *bus)
> >  	return max ? max - bus->number : 0;
> >  }
> >  
> > +/**
> > + * pci_reset_iov_state - reset the state of the IOV capability
> > + * @dev: the PCI device
> > + */
> > +void pci_reset_iov_state(struct pci_dev *dev)
> > +{
> > +	struct pci_sriov *iov = dev->sriov;
> > +
> > +	if (!dev->is_physfn)
> > +		return;
> > +	if (!iov->num_VFs)
> > +		return;
> > +
> > +	sriov_del_vfs(dev);
> > +
> > +	if (iov->link != dev->devfn)
> > +		sysfs_remove_link(&dev->dev.kobj, "dep_link");
> > +
> > +	iov->num_VFs = 0;
> > +}
> > +
> >  /**
> >   * pci_enable_sriov - enable the SR-IOV capability
> >   * @dev: the PCI device
> > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > index 3d2fb394986a..535f19d37e8d 100644
> > --- a/drivers/pci/pci.c
> > +++ b/drivers/pci/pci.c
> > @@ -4694,6 +4694,8 @@ EXPORT_SYMBOL(pci_wait_for_pending_transaction);
> >   */
> >  int pcie_flr(struct pci_dev *dev)
> >  {
> > +	pci_reset_iov_state(dev);
> > +
> >  	if (!pci_wait_for_pending_transaction(dev))
> >  		pci_err(dev, "timed out waiting for pending transaction; performing function level reset anyway\n");
> >  
> > diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> > index 3d60cabde1a1..7bb144fbec76 100644
> > --- a/drivers/pci/pci.h
> > +++ b/drivers/pci/pci.h
> > @@ -480,6 +480,7 @@ void pci_iov_update_resource(struct pci_dev *dev, int resno);
> >  resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
> >  void pci_restore_iov_state(struct pci_dev *dev);
> >  int pci_iov_bus_range(struct pci_bus *bus);
> > +void pci_reset_iov_state(struct pci_dev *dev);
> >  extern const struct attribute_group sriov_pf_dev_attr_group;
> >  extern const struct attribute_group sriov_vf_dev_attr_group;
> >  #else
> > @@ -501,6 +502,9 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
> >  {
> >  	return 0;
> >  }
> > +static inline void pci_reset_iov_state(struct pci_dev *dev)
> > +{
> > +}
> >  
> >  #endif /* CONFIG_PCI_IOV */
> >  
> > 
> > base-commit: fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf
> > -- 
> > 2.25.1
> > 

Re: [PATCH] PCI: Reset IOV state on FLR to PF

[Yicong Yang]

On 2022/1/14 0:45, Lukasz Maniak wrote:
> On Wed, Jan 12, 2022 at 08:49:03AM -0600, Bjorn Helgaas wrote:
>> On Wed, Dec 22, 2021 at 08:19:57PM +0100, Lukasz Maniak wrote:
>>> As per PCI Express specification, FLR to a PF resets the PF state as
>>> well as the SR-IOV extended capability including VF Enable which means
>>> that VFs no longer exist.
>>
>> Can you add a specific reference to the spec, please?
>>
> Following the Single Root I/O Virtualization and Sharing Specification:
> 2.2.3. FLR That Targets a PF
> PFs must support FLR.
> FLR to a PF resets the PF state as well as the SR-IOV extended
> capability including VF Enable which means that VFs no longer exist.
> 
> For PCI Express Base Specification Revision 5.0 and later, this is
> section 9.2.2.3.
> 
>>> Currently, the IOV state is not updated during FLR, resulting in
>>> non-compliant PCI driver behavior.
>>
>> And include a little detail about what problem is observed?  How would
>> a user know this problem is occurring?
>>
> The problem is that the state of the kernel and HW as to the number of
> VFs gets out of sync after FLR.
> 
> This results in further listing, after the FLR is performed by the HW,
> of VFs that actually no longer exist and should no longer be reported on
> the PCI bus. lspci return FFs for these VFs.
> 

There're some exceptions. Take HiSilicon's hns3 and sec device as an example,
the VF won't be destroyed after the FLR reset. Currently the transactions
with the VF will be restored after the FLR. But this patch will break that,
the VF is fully disabled and the transaction cannot be restored. User needs
to reconfigure it, which is unnecessary before this patch.

Can we handle this problem in another way? Maybe test the VF's vendor device
ID after the FLR reset to see whether it has really gone or not?

Thanks,
Yicong

> sriov_numvfs in sysfs returns old invalid value and does not allow
> setting a new value before explicitly setting 0 in the first place.
> 
>>> This patch introduces a simple function, called on the FLR path, that
>>> removes the virtual function devices from the PCI bus and their
>>> corresponding sysfs links with a final clear of the num_vfs value in IOV
>>> state.
>>>
>>> Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
>>> ---
>>>  drivers/pci/iov.c | 21 +++++++++++++++++++++
>>>  drivers/pci/pci.c |  2 ++
>>>  drivers/pci/pci.h |  4 ++++
>>>  3 files changed, 27 insertions(+)
>>>
>>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
>>> index 0267977c9f17..69ee321027b4 100644
>>> --- a/drivers/pci/iov.c
>>> +++ b/drivers/pci/iov.c
>>> @@ -1013,6 +1013,27 @@ int pci_iov_bus_range(struct pci_bus *bus)
>>>  	return max ? max - bus->number : 0;
>>>  }
>>>  
>>> +/**
>>> + * pci_reset_iov_state - reset the state of the IOV capability
>>> + * @dev: the PCI device
>>> + */
>>> +void pci_reset_iov_state(struct pci_dev *dev)
>>> +{
>>> +	struct pci_sriov *iov = dev->sriov;
>>> +
>>> +	if (!dev->is_physfn)
>>> +		return;
>>> +	if (!iov->num_VFs)
>>> +		return;
>>> +
>>> +	sriov_del_vfs(dev);
>>> +
>>> +	if (iov->link != dev->devfn)
>>> +		sysfs_remove_link(&dev->dev.kobj, "dep_link");
>>> +
>>> +	iov->num_VFs = 0;
>>> +}
>>> +
>>>  /**
>>>   * pci_enable_sriov - enable the SR-IOV capability
>>>   * @dev: the PCI device
>>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>>> index 3d2fb394986a..535f19d37e8d 100644
>>> --- a/drivers/pci/pci.c
>>> +++ b/drivers/pci/pci.c
>>> @@ -4694,6 +4694,8 @@ EXPORT_SYMBOL(pci_wait_for_pending_transaction);
>>>   */
>>>  int pcie_flr(struct pci_dev *dev)
>>>  {
>>> +	pci_reset_iov_state(dev);
>>> +
>>>  	if (!pci_wait_for_pending_transaction(dev))
>>>  		pci_err(dev, "timed out waiting for pending transaction; performing function level reset anyway\n");
>>>  
>>> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
>>> index 3d60cabde1a1..7bb144fbec76 100644
>>> --- a/drivers/pci/pci.h
>>> +++ b/drivers/pci/pci.h
>>> @@ -480,6 +480,7 @@ void pci_iov_update_resource(struct pci_dev *dev, int resno);
>>>  resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
>>>  void pci_restore_iov_state(struct pci_dev *dev);
>>>  int pci_iov_bus_range(struct pci_bus *bus);
>>> +void pci_reset_iov_state(struct pci_dev *dev);
>>>  extern const struct attribute_group sriov_pf_dev_attr_group;
>>>  extern const struct attribute_group sriov_vf_dev_attr_group;
>>>  #else
>>> @@ -501,6 +502,9 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
>>>  {
>>>  	return 0;
>>>  }
>>> +static inline void pci_reset_iov_state(struct pci_dev *dev)
>>> +{
>>> +}
>>>  
>>>  #endif /* CONFIG_PCI_IOV */
>>>  
>>>
>>> base-commit: fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf
>>> -- 
>>> 2.25.1
>>>
> .
> 

Re: [PATCH] PCI: Reset IOV state on FLR to PF

[Bjorn Helgaas]

On Fri, Jan 14, 2022 at 05:42:48PM +0800, Yicong Yang wrote:
> On 2022/1/14 0:45, Lukasz Maniak wrote:
> > On Wed, Jan 12, 2022 at 08:49:03AM -0600, Bjorn Helgaas wrote:
> >> On Wed, Dec 22, 2021 at 08:19:57PM +0100, Lukasz Maniak wrote:
> >>> As per PCI Express specification, FLR to a PF resets the PF state as
> >>> well as the SR-IOV extended capability including VF Enable which means
> >>> that VFs no longer exist.
> >>
> >> Can you add a specific reference to the spec, please?
> >>
> > Following the Single Root I/O Virtualization and Sharing Specification:
> > 2.2.3. FLR That Targets a PF
> > PFs must support FLR.
> > FLR to a PF resets the PF state as well as the SR-IOV extended
> > capability including VF Enable which means that VFs no longer exist.
> > 
> > For PCI Express Base Specification Revision 5.0 and later, this is
> > section 9.2.2.3.

This is also the section in the new PCIe r6.0.  Let's use that.

> >>> Currently, the IOV state is not updated during FLR, resulting in
> >>> non-compliant PCI driver behavior.
> >>
> >> And include a little detail about what problem is observed?  How would
> >> a user know this problem is occurring?
> >>
> > The problem is that the state of the kernel and HW as to the number of
> > VFs gets out of sync after FLR.
> > 
> > This results in further listing, after the FLR is performed by the HW,
> > of VFs that actually no longer exist and should no longer be reported on
> > the PCI bus. lspci return FFs for these VFs.
> 
> There're some exceptions. Take HiSilicon's hns3 and sec device as an
> example, the VF won't be destroyed after the FLR reset.

If FLR on an hns3 PF does *not* clear VF Enable, and the VFs still
exist after FLR, isn't that a violation of sec 9.2.2.3?

If hns3 and sec don't conform to the spec, we should have some sort of
quirk that serves to document and work around this.

> Currently the transactions with the VF will be restored after the
> FLR. But this patch will break that, the VF is fully disabled and
> the transaction cannot be restored. User needs to reconfigure it,
> which is unnecessary before this patch.

What does it mean for a "transaction to be restored"?  Maybe you mean
this patch removes the *VFs* via sriov_del_vfs(), and whoever
initiated the FLR would need to re-enable VFs via pci_enable_sriov()
or something similar?

If FLR disables VFs, it seems like we should expect to have to
re-enable them if we want them.

> Can we handle this problem in another way? Maybe test the VF's
> vendor device ID after the FLR reset to see whether it has really
> gone or not?
>
> > sriov_numvfs in sysfs returns old invalid value and does not allow
> > setting a new value before explicitly setting 0 in the first place.
> > 
> >>> This patch introduces a simple function, called on the FLR path, that
> >>> removes the virtual function devices from the PCI bus and their
> >>> corresponding sysfs links with a final clear of the num_vfs value in IOV
> >>> state.
> >>>
> >>> Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
> >>> ---
> >>>  drivers/pci/iov.c | 21 +++++++++++++++++++++
> >>>  drivers/pci/pci.c |  2 ++
> >>>  drivers/pci/pci.h |  4 ++++
> >>>  3 files changed, 27 insertions(+)
> >>>
> >>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> >>> index 0267977c9f17..69ee321027b4 100644
> >>> --- a/drivers/pci/iov.c
> >>> +++ b/drivers/pci/iov.c
> >>> @@ -1013,6 +1013,27 @@ int pci_iov_bus_range(struct pci_bus *bus)
> >>>  	return max ? max - bus->number : 0;
> >>>  }
> >>>  
> >>> +/**
> >>> + * pci_reset_iov_state - reset the state of the IOV capability
> >>> + * @dev: the PCI device
> >>> + */
> >>> +void pci_reset_iov_state(struct pci_dev *dev)
> >>> +{
> >>> +	struct pci_sriov *iov = dev->sriov;
> >>> +
> >>> +	if (!dev->is_physfn)
> >>> +		return;
> >>> +	if (!iov->num_VFs)
> >>> +		return;
> >>> +
> >>> +	sriov_del_vfs(dev);
> >>> +
> >>> +	if (iov->link != dev->devfn)
> >>> +		sysfs_remove_link(&dev->dev.kobj, "dep_link");
> >>> +
> >>> +	iov->num_VFs = 0;
> >>> +}
> >>> +
> >>>  /**
> >>>   * pci_enable_sriov - enable the SR-IOV capability
> >>>   * @dev: the PCI device
> >>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> >>> index 3d2fb394986a..535f19d37e8d 100644
> >>> --- a/drivers/pci/pci.c
> >>> +++ b/drivers/pci/pci.c
> >>> @@ -4694,6 +4694,8 @@ EXPORT_SYMBOL(pci_wait_for_pending_transaction);
> >>>   */
> >>>  int pcie_flr(struct pci_dev *dev)
> >>>  {
> >>> +	pci_reset_iov_state(dev);
> >>> +
> >>>  	if (!pci_wait_for_pending_transaction(dev))
> >>>  		pci_err(dev, "timed out waiting for pending transaction; performing function level reset anyway\n");
> >>>  
> >>> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> >>> index 3d60cabde1a1..7bb144fbec76 100644
> >>> --- a/drivers/pci/pci.h
> >>> +++ b/drivers/pci/pci.h
> >>> @@ -480,6 +480,7 @@ void pci_iov_update_resource(struct pci_dev *dev, int resno);
> >>>  resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
> >>>  void pci_restore_iov_state(struct pci_dev *dev);
> >>>  int pci_iov_bus_range(struct pci_bus *bus);
> >>> +void pci_reset_iov_state(struct pci_dev *dev);
> >>>  extern const struct attribute_group sriov_pf_dev_attr_group;
> >>>  extern const struct attribute_group sriov_vf_dev_attr_group;
> >>>  #else
> >>> @@ -501,6 +502,9 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
> >>>  {
> >>>  	return 0;
> >>>  }
> >>> +static inline void pci_reset_iov_state(struct pci_dev *dev)
> >>> +{
> >>> +}
> >>>  
> >>>  #endif /* CONFIG_PCI_IOV */
> >>>  
> >>>
> >>> base-commit: fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf
> >>> -- 
> >>> 2.25.1
> >>>
> > .
> > 

Re: [PATCH] PCI: Reset IOV state on FLR to PF

[Yicong Yang]

On 2022/1/15 0:37, Bjorn Helgaas wrote:
> On Fri, Jan 14, 2022 at 05:42:48PM +0800, Yicong Yang wrote:
>> On 2022/1/14 0:45, Lukasz Maniak wrote:
>>> On Wed, Jan 12, 2022 at 08:49:03AM -0600, Bjorn Helgaas wrote:
>>>> On Wed, Dec 22, 2021 at 08:19:57PM +0100, Lukasz Maniak wrote:
>>>>> As per PCI Express specification, FLR to a PF resets the PF state as
>>>>> well as the SR-IOV extended capability including VF Enable which means
>>>>> that VFs no longer exist.
>>>>
>>>> Can you add a specific reference to the spec, please?
>>>>
>>> Following the Single Root I/O Virtualization and Sharing Specification:
>>> 2.2.3. FLR That Targets a PF
>>> PFs must support FLR.
>>> FLR to a PF resets the PF state as well as the SR-IOV extended
>>> capability including VF Enable which means that VFs no longer exist.
>>>
>>> For PCI Express Base Specification Revision 5.0 and later, this is
>>> section 9.2.2.3.
> 
> This is also the section in the new PCIe r6.0.  Let's use that.
> 
>>>>> Currently, the IOV state is not updated during FLR, resulting in
>>>>> non-compliant PCI driver behavior.
>>>>
>>>> And include a little detail about what problem is observed?  How would
>>>> a user know this problem is occurring?
>>>>
>>> The problem is that the state of the kernel and HW as to the number of
>>> VFs gets out of sync after FLR.
>>>
>>> This results in further listing, after the FLR is performed by the HW,
>>> of VFs that actually no longer exist and should no longer be reported on
>>> the PCI bus. lspci return FFs for these VFs.
>>
>> There're some exceptions. Take HiSilicon's hns3 and sec device as an
>> example, the VF won't be destroyed after the FLR reset.
> 
> If FLR on an hns3 PF does *not* clear VF Enable, and the VFs still
> exist after FLR, isn't that a violation of sec 9.2.2.3?
> 

yes I think it's a violation to the spec.

> If hns3 and sec don't conform to the spec, we should have some sort of
> quirk that serves to document and work around this.
> 

ok I think it'll help. Do you mean something like this based on this patch:

diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 69ee321027b4..0e4976c669b2 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -1025,6 +1025,8 @@ void pci_reset_iov_state(struct pci_dev *dev)
 		return;
 	if (!iov->num_VFs)
 		return;
+	if (dev->flr_no_vf_reset)
+		return;

 	sriov_del_vfs(dev);

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 003950c738d2..c8ffcb0ac612 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1860,6 +1860,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa256, quirk_huawei_pcie_sva);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa258, quirk_huawei_pcie_sva);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa259, quirk_huawei_pcie_sva);

+/*
+ * Some HiSilicon PCIe devices' VF won't be destroyed after a FLR reset.
+ * Don't reset these devices' IOV state when doing FLR.
+ */
+static void quirk_huawei_pcie_flr(struct pci_dev *pdev)
+{
+	pdev->flr_no_vf_reset = 1;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa255, quirk_huawei_pcie_flr);
+/* ...some other devices have this quirk */
+
 /*
  * It's possible for the MSI to get corrupted if SHPC and ACPI are used
  * together on certain PXH-based systems.
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 18a75c8e615c..e62f9fa4d48f 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -454,6 +454,7 @@ struct pci_dev {
 	unsigned int	is_probed:1;		/* Device probing in progress */
 	unsigned int	link_active_reporting:1;/* Device capable of reporting link active */
 	unsigned int	no_vf_scan:1;		/* Don't scan for VFs after IOV enablement */
+	unsigned int	flr_no_vf_reset:1;	/* VF won't be destroyed after PF's FLR */
 	unsigned int	no_command_memory:1;	/* No PCI_COMMAND_MEMORY */
 	pci_dev_flags_t dev_flags;
 	atomic_t	enable_cnt;	/* pci_enable_device has been called */
-- 
2.24.0


>> Currently the transactions with the VF will be restored after the
>> FLR. But this patch will break that, the VF is fully disabled and
>> the transaction cannot be restored. User needs to reconfigure it,
>> which is unnecessary before this patch.
> 
> What does it mean for a "transaction to be restored"?  Maybe you mean
> this patch removes the *VFs* via sriov_del_vfs(), and whoever
> initiated the FLR would need to re-enable VFs via pci_enable_sriov()
> or something similar?
> 

Partly. It'll also terminate the VF users.
Think that I attach the VF of hns to a VM by vfio and ping the network
in the VM, when doing FLR the 'ping' will pause and after FLR it'll
resume. Currenlty The driver handle this in the ->reset_{prepare, done}()
methods. The user of VM may not realize there is a FLR of the PF as the
VF always exists and the 'ping' is never terminated.

If we remove the VF when doing FLR, then 1) we'll block in the VF->remove()
until no one is using the device, for example the 'ping' is finished.
2) the VF in the VM no longer exists and we have to re-enable VF and hotplug
it into the VM and restart the ping. That's a big difference.

> If FLR disables VFs, it seems like we should expect to have to
> re-enable them if we want them.
> 

It involves a remove()/probe() process of the VF driver and the user of the VF
will be terminated, just like the situation illustrated above.

Thanks,
Yicong

>> Can we handle this problem in another way? Maybe test the VF's
>> vendor device ID after the FLR reset to see whether it has really
>> gone or not?
>>
>>> sriov_numvfs in sysfs returns old invalid value and does not allow
>>> setting a new value before explicitly setting 0 in the first place.
>>>
>>>>> This patch introduces a simple function, called on the FLR path, that
>>>>> removes the virtual function devices from the PCI bus and their
>>>>> corresponding sysfs links with a final clear of the num_vfs value in IOV
>>>>> state.
>>>>>
>>>>> Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
>>>>> ---
>>>>>  drivers/pci/iov.c | 21 +++++++++++++++++++++
>>>>>  drivers/pci/pci.c |  2 ++
>>>>>  drivers/pci/pci.h |  4 ++++
>>>>>  3 files changed, 27 insertions(+)
>>>>>
>>>>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
>>>>> index 0267977c9f17..69ee321027b4 100644
>>>>> --- a/drivers/pci/iov.c
>>>>> +++ b/drivers/pci/iov.c
>>>>> @@ -1013,6 +1013,27 @@ int pci_iov_bus_range(struct pci_bus *bus)
>>>>>  	return max ? max - bus->number : 0;
>>>>>  }
>>>>>  
>>>>> +/**
>>>>> + * pci_reset_iov_state - reset the state of the IOV capability
>>>>> + * @dev: the PCI device
>>>>> + */
>>>>> +void pci_reset_iov_state(struct pci_dev *dev)
>>>>> +{
>>>>> +	struct pci_sriov *iov = dev->sriov;
>>>>> +
>>>>> +	if (!dev->is_physfn)
>>>>> +		return;
>>>>> +	if (!iov->num_VFs)
>>>>> +		return;
>>>>> +
>>>>> +	sriov_del_vfs(dev);
>>>>> +
>>>>> +	if (iov->link != dev->devfn)
>>>>> +		sysfs_remove_link(&dev->dev.kobj, "dep_link");
>>>>> +
>>>>> +	iov->num_VFs = 0;
>>>>> +}
>>>>> +
>>>>>  /**
>>>>>   * pci_enable_sriov - enable the SR-IOV capability
>>>>>   * @dev: the PCI device
>>>>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>>>>> index 3d2fb394986a..535f19d37e8d 100644
>>>>> --- a/drivers/pci/pci.c
>>>>> +++ b/drivers/pci/pci.c
>>>>> @@ -4694,6 +4694,8 @@ EXPORT_SYMBOL(pci_wait_for_pending_transaction);
>>>>>   */
>>>>>  int pcie_flr(struct pci_dev *dev)
>>>>>  {
>>>>> +	pci_reset_iov_state(dev);
>>>>> +
>>>>>  	if (!pci_wait_for_pending_transaction(dev))
>>>>>  		pci_err(dev, "timed out waiting for pending transaction; performing function level reset anyway\n");
>>>>>  
>>>>> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
>>>>> index 3d60cabde1a1..7bb144fbec76 100644
>>>>> --- a/drivers/pci/pci.h
>>>>> +++ b/drivers/pci/pci.h
>>>>> @@ -480,6 +480,7 @@ void pci_iov_update_resource(struct pci_dev *dev, int resno);
>>>>>  resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
>>>>>  void pci_restore_iov_state(struct pci_dev *dev);
>>>>>  int pci_iov_bus_range(struct pci_bus *bus);
>>>>> +void pci_reset_iov_state(struct pci_dev *dev);
>>>>>  extern const struct attribute_group sriov_pf_dev_attr_group;
>>>>>  extern const struct attribute_group sriov_vf_dev_attr_group;
>>>>>  #else
>>>>> @@ -501,6 +502,9 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
>>>>>  {
>>>>>  	return 0;
>>>>>  }
>>>>> +static inline void pci_reset_iov_state(struct pci_dev *dev)
>>>>> +{
>>>>> +}
>>>>>  
>>>>>  #endif /* CONFIG_PCI_IOV */
>>>>>  
>>>>>
>>>>> base-commit: fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf
>>>>> -- 
>>>>> 2.25.1
>>>>>
>>> .
>>>
> .
> 

Re: [PATCH] PCI: Reset IOV state on FLR to PF

[Bjorn Helgaas]

[+cc Alex in case he has comments on how FLR should work on
non-conforming hns3 devices]

On Sat, Jan 15, 2022 at 05:22:19PM +0800, Yicong Yang wrote:
> On 2022/1/15 0:37, Bjorn Helgaas wrote:
> > On Fri, Jan 14, 2022 at 05:42:48PM +0800, Yicong Yang wrote:
> >> On 2022/1/14 0:45, Lukasz Maniak wrote:
> >>> On Wed, Jan 12, 2022 at 08:49:03AM -0600, Bjorn Helgaas wrote:
> >>>> On Wed, Dec 22, 2021 at 08:19:57PM +0100, Lukasz Maniak wrote:
> >>>>> As per PCI Express specification, FLR to a PF resets the PF state as
> >>>>> well as the SR-IOV extended capability including VF Enable which means
> >>>>> that VFs no longer exist.
> >>>>
> >>>> Can you add a specific reference to the spec, please?
> >>>>
> >>> Following the Single Root I/O Virtualization and Sharing Specification:
> >>> 2.2.3. FLR That Targets a PF
> >>> PFs must support FLR.
> >>> FLR to a PF resets the PF state as well as the SR-IOV extended
> >>> capability including VF Enable which means that VFs no longer exist.
> >>>
> >>> For PCI Express Base Specification Revision 5.0 and later, this is
> >>> section 9.2.2.3.
> > 
> > This is also the section in the new PCIe r6.0.  Let's use that.
> > 
> >>>>> Currently, the IOV state is not updated during FLR, resulting in
> >>>>> non-compliant PCI driver behavior.
> >>>>
> >>>> And include a little detail about what problem is observed?  How would
> >>>> a user know this problem is occurring?
> >>>>
> >>> The problem is that the state of the kernel and HW as to the number of
> >>> VFs gets out of sync after FLR.
> >>>
> >>> This results in further listing, after the FLR is performed by the HW,
> >>> of VFs that actually no longer exist and should no longer be reported on
> >>> the PCI bus. lspci return FFs for these VFs.
> >>
> >> There're some exceptions. Take HiSilicon's hns3 and sec device as an
> >> example, the VF won't be destroyed after the FLR reset.
> > 
> > If FLR on an hns3 PF does *not* clear VF Enable, and the VFs still
> > exist after FLR, isn't that a violation of sec 9.2.2.3?
> 
> yes I think it's a violation to the spec.

Thanks for confirming that.

> > If hns3 and sec don't conform to the spec, we should have some sort of
> > quirk that serves to document and work around this.
> 
> ok I think it'll help. Do you mean something like this based on this patch:
> 
> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> index 69ee321027b4..0e4976c669b2 100644
> --- a/drivers/pci/iov.c
> +++ b/drivers/pci/iov.c
> @@ -1025,6 +1025,8 @@ void pci_reset_iov_state(struct pci_dev *dev)
>  		return;
>  	if (!iov->num_VFs)
>  		return;
> +	if (dev->flr_no_vf_reset)
> +		return;
> 
>  	sriov_del_vfs(dev);
> 
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 003950c738d2..c8ffcb0ac612 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -1860,6 +1860,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa256, quirk_huawei_pcie_sva);
>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa258, quirk_huawei_pcie_sva);
>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa259, quirk_huawei_pcie_sva);
> 
> +/*
> + * Some HiSilicon PCIe devices' VF won't be destroyed after a FLR reset.
> + * Don't reset these devices' IOV state when doing FLR.
> + */
> +static void quirk_huawei_pcie_flr(struct pci_dev *pdev)
> +{
> +	pdev->flr_no_vf_reset = 1;
> +}
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa255, quirk_huawei_pcie_flr);
> +/* ...some other devices have this quirk */

Yes, I think something along this line will help.

> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 18a75c8e615c..e62f9fa4d48f 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -454,6 +454,7 @@ struct pci_dev {
>  	unsigned int	is_probed:1;		/* Device probing in progress */
>  	unsigned int	link_active_reporting:1;/* Device capable of reporting link active */
>  	unsigned int	no_vf_scan:1;		/* Don't scan for VFs after IOV enablement */
> +	unsigned int	flr_no_vf_reset:1;	/* VF won't be destroyed after PF's FLR */
> 
> >> Currently the transactions with the VF will be restored after the
> >> FLR. But this patch will break that, the VF is fully disabled and
> >> the transaction cannot be restored. User needs to reconfigure it,
> >> which is unnecessary before this patch.
> > 
> > What does it mean for a "transaction to be restored"?  Maybe you mean
> > this patch removes the *VFs* via sriov_del_vfs(), and whoever
> > initiated the FLR would need to re-enable VFs via pci_enable_sriov()
> > or something similar?
> 
> Partly. It'll also terminate the VF users.
> Think that I attach the VF of hns to a VM by vfio and ping the network
> in the VM, when doing FLR the 'ping' will pause and after FLR it'll
> resume. Currenlty The driver handle this in the ->reset_{prepare, done}()
> methods. The user of VM may not realize there is a FLR of the PF as the
> VF always exists and the 'ping' is never terminated.
> 
> If we remove the VF when doing FLR, then 1) we'll block in the VF->remove()
> until no one is using the device, for example the 'ping' is finished.
> 2) the VF in the VM no longer exists and we have to re-enable VF and hotplug
> it into the VM and restart the ping. That's a big difference.
> 
> > If FLR disables VFs, it seems like we should expect to have to
> > re-enable them if we want them.
> 
> It involves a remove()/probe() process of the VF driver and the user
> of the VF will be terminated, just like the situation illustrated
> above.

I think users of FLR should be able to rely on it working per spec,
i.e., that VFs will be destroyed.  If hardware like hns3 doesn't do
that, the quirk should work around that in software by doing it
explicitly.

I don't think the non-standard behavior should be exposed to the
users.  The user should not have to know about this hns3 issue.

If FLR on a standard NIC terminates a ping on a VF, FLR on an hns3 NIC
should also terminate a ping on a VF.

> >> Can we handle this problem in another way? Maybe test the VF's
> >> vendor device ID after the FLR reset to see whether it has really
> >> gone or not?
> >>
> >>> sriov_numvfs in sysfs returns old invalid value and does not allow
> >>> setting a new value before explicitly setting 0 in the first place.
> >>>
> >>>>> This patch introduces a simple function, called on the FLR path, that
> >>>>> removes the virtual function devices from the PCI bus and their
> >>>>> corresponding sysfs links with a final clear of the num_vfs value in IOV
> >>>>> state.
> >>>>>
> >>>>> Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
> >>>>> ---
> >>>>>  drivers/pci/iov.c | 21 +++++++++++++++++++++
> >>>>>  drivers/pci/pci.c |  2 ++
> >>>>>  drivers/pci/pci.h |  4 ++++
> >>>>>  3 files changed, 27 insertions(+)
> >>>>>
> >>>>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> >>>>> index 0267977c9f17..69ee321027b4 100644
> >>>>> --- a/drivers/pci/iov.c
> >>>>> +++ b/drivers/pci/iov.c
> >>>>> @@ -1013,6 +1013,27 @@ int pci_iov_bus_range(struct pci_bus *bus)
> >>>>>  	return max ? max - bus->number : 0;
> >>>>>  }
> >>>>>  
> >>>>> +/**
> >>>>> + * pci_reset_iov_state - reset the state of the IOV capability
> >>>>> + * @dev: the PCI device
> >>>>> + */
> >>>>> +void pci_reset_iov_state(struct pci_dev *dev)
> >>>>> +{
> >>>>> +	struct pci_sriov *iov = dev->sriov;
> >>>>> +
> >>>>> +	if (!dev->is_physfn)
> >>>>> +		return;
> >>>>> +	if (!iov->num_VFs)
> >>>>> +		return;
> >>>>> +
> >>>>> +	sriov_del_vfs(dev);
> >>>>> +
> >>>>> +	if (iov->link != dev->devfn)
> >>>>> +		sysfs_remove_link(&dev->dev.kobj, "dep_link");
> >>>>> +
> >>>>> +	iov->num_VFs = 0;
> >>>>> +}
> >>>>> +
> >>>>>  /**
> >>>>>   * pci_enable_sriov - enable the SR-IOV capability
> >>>>>   * @dev: the PCI device
> >>>>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> >>>>> index 3d2fb394986a..535f19d37e8d 100644
> >>>>> --- a/drivers/pci/pci.c
> >>>>> +++ b/drivers/pci/pci.c
> >>>>> @@ -4694,6 +4694,8 @@ EXPORT_SYMBOL(pci_wait_for_pending_transaction);
> >>>>>   */
> >>>>>  int pcie_flr(struct pci_dev *dev)
> >>>>>  {
> >>>>> +	pci_reset_iov_state(dev);
> >>>>> +
> >>>>>  	if (!pci_wait_for_pending_transaction(dev))
> >>>>>  		pci_err(dev, "timed out waiting for pending transaction; performing function level reset anyway\n");
> >>>>>  
> >>>>> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> >>>>> index 3d60cabde1a1..7bb144fbec76 100644
> >>>>> --- a/drivers/pci/pci.h
> >>>>> +++ b/drivers/pci/pci.h
> >>>>> @@ -480,6 +480,7 @@ void pci_iov_update_resource(struct pci_dev *dev, int resno);
> >>>>>  resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
> >>>>>  void pci_restore_iov_state(struct pci_dev *dev);
> >>>>>  int pci_iov_bus_range(struct pci_bus *bus);
> >>>>> +void pci_reset_iov_state(struct pci_dev *dev);
> >>>>>  extern const struct attribute_group sriov_pf_dev_attr_group;
> >>>>>  extern const struct attribute_group sriov_vf_dev_attr_group;
> >>>>>  #else
> >>>>> @@ -501,6 +502,9 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
> >>>>>  {
> >>>>>  	return 0;
> >>>>>  }
> >>>>> +static inline void pci_reset_iov_state(struct pci_dev *dev)
> >>>>> +{
> >>>>> +}
> >>>>>  
> >>>>>  #endif /* CONFIG_PCI_IOV */

Re: [PATCH] PCI: Reset IOV state on FLR to PF

[Yicong Yang]

On 2022/1/18 6:55, Bjorn Helgaas wrote:
> [+cc Alex in case he has comments on how FLR should work on
> non-conforming hns3 devices]
> 
> On Sat, Jan 15, 2022 at 05:22:19PM +0800, Yicong Yang wrote:
>> On 2022/1/15 0:37, Bjorn Helgaas wrote:
>>> On Fri, Jan 14, 2022 at 05:42:48PM +0800, Yicong Yang wrote:
>>>> On 2022/1/14 0:45, Lukasz Maniak wrote:
>>>>> On Wed, Jan 12, 2022 at 08:49:03AM -0600, Bjorn Helgaas wrote:
>>>>>> On Wed, Dec 22, 2021 at 08:19:57PM +0100, Lukasz Maniak wrote:
>>>>>>> As per PCI Express specification, FLR to a PF resets the PF state as
>>>>>>> well as the SR-IOV extended capability including VF Enable which means
>>>>>>> that VFs no longer exist.
>>>>>>
>>>>>> Can you add a specific reference to the spec, please?
>>>>>>
>>>>> Following the Single Root I/O Virtualization and Sharing Specification:
>>>>> 2.2.3. FLR That Targets a PF
>>>>> PFs must support FLR.
>>>>> FLR to a PF resets the PF state as well as the SR-IOV extended
>>>>> capability including VF Enable which means that VFs no longer exist.
>>>>>
>>>>> For PCI Express Base Specification Revision 5.0 and later, this is
>>>>> section 9.2.2.3.
>>>
>>> This is also the section in the new PCIe r6.0.  Let's use that.
>>>
>>>>>>> Currently, the IOV state is not updated during FLR, resulting in
>>>>>>> non-compliant PCI driver behavior.
>>>>>>
>>>>>> And include a little detail about what problem is observed?  How would
>>>>>> a user know this problem is occurring?
>>>>>>
>>>>> The problem is that the state of the kernel and HW as to the number of
>>>>> VFs gets out of sync after FLR.
>>>>>
>>>>> This results in further listing, after the FLR is performed by the HW,
>>>>> of VFs that actually no longer exist and should no longer be reported on
>>>>> the PCI bus. lspci return FFs for these VFs.
>>>>
>>>> There're some exceptions. Take HiSilicon's hns3 and sec device as an
>>>> example, the VF won't be destroyed after the FLR reset.
>>>
>>> If FLR on an hns3 PF does *not* clear VF Enable, and the VFs still
>>> exist after FLR, isn't that a violation of sec 9.2.2.3?
>>
>> yes I think it's a violation to the spec.
> 
> Thanks for confirming that.
> 
>>> If hns3 and sec don't conform to the spec, we should have some sort of
>>> quirk that serves to document and work around this.
>>
>> ok I think it'll help. Do you mean something like this based on this patch:
>>
>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
>> index 69ee321027b4..0e4976c669b2 100644
>> --- a/drivers/pci/iov.c
>> +++ b/drivers/pci/iov.c
>> @@ -1025,6 +1025,8 @@ void pci_reset_iov_state(struct pci_dev *dev)
>>  		return;
>>  	if (!iov->num_VFs)
>>  		return;
>> +	if (dev->flr_no_vf_reset)
>> +		return;
>>
>>  	sriov_del_vfs(dev);
>>
>> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
>> index 003950c738d2..c8ffcb0ac612 100644
>> --- a/drivers/pci/quirks.c
>> +++ b/drivers/pci/quirks.c
>> @@ -1860,6 +1860,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa256, quirk_huawei_pcie_sva);
>>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa258, quirk_huawei_pcie_sva);
>>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa259, quirk_huawei_pcie_sva);
>>
>> +/*
>> + * Some HiSilicon PCIe devices' VF won't be destroyed after a FLR reset.
>> + * Don't reset these devices' IOV state when doing FLR.
>> + */
>> +static void quirk_huawei_pcie_flr(struct pci_dev *pdev)
>> +{
>> +	pdev->flr_no_vf_reset = 1;
>> +}
>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa255, quirk_huawei_pcie_flr);
>> +/* ...some other devices have this quirk */
> 
> Yes, I think something along this line will help.
> 
>> diff --git a/include/linux/pci.h b/include/linux/pci.h
>> index 18a75c8e615c..e62f9fa4d48f 100644
>> --- a/include/linux/pci.h
>> +++ b/include/linux/pci.h
>> @@ -454,6 +454,7 @@ struct pci_dev {
>>  	unsigned int	is_probed:1;		/* Device probing in progress */
>>  	unsigned int	link_active_reporting:1;/* Device capable of reporting link active */
>>  	unsigned int	no_vf_scan:1;		/* Don't scan for VFs after IOV enablement */
>> +	unsigned int	flr_no_vf_reset:1;	/* VF won't be destroyed after PF's FLR */
>>
>>>> Currently the transactions with the VF will be restored after the
>>>> FLR. But this patch will break that, the VF is fully disabled and
>>>> the transaction cannot be restored. User needs to reconfigure it,
>>>> which is unnecessary before this patch.
>>>
>>> What does it mean for a "transaction to be restored"?  Maybe you mean
>>> this patch removes the *VFs* via sriov_del_vfs(), and whoever
>>> initiated the FLR would need to re-enable VFs via pci_enable_sriov()
>>> or something similar?
>>
>> Partly. It'll also terminate the VF users.
>> Think that I attach the VF of hns to a VM by vfio and ping the network
>> in the VM, when doing FLR the 'ping' will pause and after FLR it'll
>> resume. Currenlty The driver handle this in the ->reset_{prepare, done}()
>> methods. The user of VM may not realize there is a FLR of the PF as the
>> VF always exists and the 'ping' is never terminated.
>>
>> If we remove the VF when doing FLR, then 1) we'll block in the VF->remove()
>> until no one is using the device, for example the 'ping' is finished.
>> 2) the VF in the VM no longer exists and we have to re-enable VF and hotplug
>> it into the VM and restart the ping. That's a big difference.
>>
>>> If FLR disables VFs, it seems like we should expect to have to
>>> re-enable them if we want them.
>>
>> It involves a remove()/probe() process of the VF driver and the user
>> of the VF will be terminated, just like the situation illustrated
>> above.
> 
> I think users of FLR should be able to rely on it working per spec,
> i.e., that VFs will be destroyed.  If hardware like hns3 doesn't do
> that, the quirk should work around that in software by doing it
> explicitly.
> 
> I don't think the non-standard behavior should be exposed to the
> users.  The user should not have to know about this hns3 issue.
> 
> If FLR on a standard NIC terminates a ping on a VF, FLR on an hns3 NIC
> should also terminate a ping on a VF.
> 

ok thanks for the discussion, agree on that. According to the spec, after
the FLR to the PF the VF does not exist anymore, so the ping will be terminated.
Our hns3 and sec team are still evaluating it before coming to a solution of
whether using a quirk or comform to the spec.

For this patch it looks reasonable to me, but some questions about the code below.

>>>> Can we handle this problem in another way? Maybe test the VF's
>>>> vendor device ID after the FLR reset to see whether it has really
>>>> gone or not?
>>>>
>>>>> sriov_numvfs in sysfs returns old invalid value and does not allow
>>>>> setting a new value before explicitly setting 0 in the first place.
>>>>>
>>>>>>> This patch introduces a simple function, called on the FLR path, that
>>>>>>> removes the virtual function devices from the PCI bus and their
>>>>>>> corresponding sysfs links with a final clear of the num_vfs value in IOV
>>>>>>> state.
>>>>>>>
>>>>>>> Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
>>>>>>> ---
>>>>>>>  drivers/pci/iov.c | 21 +++++++++++++++++++++
>>>>>>>  drivers/pci/pci.c |  2 ++
>>>>>>>  drivers/pci/pci.h |  4 ++++
>>>>>>>  3 files changed, 27 insertions(+)
>>>>>>>
>>>>>>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
>>>>>>> index 0267977c9f17..69ee321027b4 100644
>>>>>>> --- a/drivers/pci/iov.c
>>>>>>> +++ b/drivers/pci/iov.c
>>>>>>> @@ -1013,6 +1013,27 @@ int pci_iov_bus_range(struct pci_bus *bus)
>>>>>>>  	return max ? max - bus->number : 0;
>>>>>>>  }
>>>>>>>  
>>>>>>> +/**
>>>>>>> + * pci_reset_iov_state - reset the state of the IOV capability
>>>>>>> + * @dev: the PCI device
>>>>>>> + */
>>>>>>> +void pci_reset_iov_state(struct pci_dev *dev)
>>>>>>> +{
>>>>>>> +	struct pci_sriov *iov = dev->sriov;
>>>>>>> +
>>>>>>> +	if (!dev->is_physfn)
>>>>>>> +		return;
>>>>>>> +	if (!iov->num_VFs)
>>>>>>> +		return;
>>>>>>> +
>>>>>>> +	sriov_del_vfs(dev);
>>>>>>> +
>>>>>>> +	if (iov->link != dev->devfn)
>>>>>>> +		sysfs_remove_link(&dev->dev.kobj, "dep_link");
>>>>>>> +
>>>>>>> +	iov->num_VFs = 0;
>>>>>>> +}
>>>>>>> +

Any reason for not using pci_disable_sriov()?

With the spec the related registers in the SRIOV cap will be reset so
it's ok in general. But for some devices not following the spec like hns3,
some fields like VF enable won't be reset and keep enabled after the FLR.
In this case after the FLR the VF devices in the system has gone but
the state of the PF SRIOV cap leaves uncleared. pci_disable_sriov()
will reset the whole SRIOV cap. It'll also call pcibios_sriov_disable()
to correct handle the VF disabling on some platforms, IIUC.

Or is it better to use pdev->driver->sriov_configure(pdev,0)?
PF drivers must implement ->sriov_configure() for enabling/disabling
the VF but we totally skip the PF driver here.

Thanks,
Yicong

>>>>>>>  /**
>>>>>>>   * pci_enable_sriov - enable the SR-IOV capability
>>>>>>>   * @dev: the PCI device
>>>>>>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>>>>>>> index 3d2fb394986a..535f19d37e8d 100644
>>>>>>> --- a/drivers/pci/pci.c
>>>>>>> +++ b/drivers/pci/pci.c
>>>>>>> @@ -4694,6 +4694,8 @@ EXPORT_SYMBOL(pci_wait_for_pending_transaction);
>>>>>>>   */
>>>>>>>  int pcie_flr(struct pci_dev *dev)
>>>>>>>  {
>>>>>>> +	pci_reset_iov_state(dev);
>>>>>>> +
>>>>>>>  	if (!pci_wait_for_pending_transaction(dev))
>>>>>>>  		pci_err(dev, "timed out waiting for pending transaction; performing function level reset anyway\n");
>>>>>>>  
>>>>>>> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
>>>>>>> index 3d60cabde1a1..7bb144fbec76 100644
>>>>>>> --- a/drivers/pci/pci.h
>>>>>>> +++ b/drivers/pci/pci.h
>>>>>>> @@ -480,6 +480,7 @@ void pci_iov_update_resource(struct pci_dev *dev, int resno);
>>>>>>>  resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
>>>>>>>  void pci_restore_iov_state(struct pci_dev *dev);
>>>>>>>  int pci_iov_bus_range(struct pci_bus *bus);
>>>>>>> +void pci_reset_iov_state(struct pci_dev *dev);
>>>>>>>  extern const struct attribute_group sriov_pf_dev_attr_group;
>>>>>>>  extern const struct attribute_group sriov_vf_dev_attr_group;
>>>>>>>  #else
>>>>>>> @@ -501,6 +502,9 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
>>>>>>>  {
>>>>>>>  	return 0;
>>>>>>>  }
>>>>>>> +static inline void pci_reset_iov_state(struct pci_dev *dev)
>>>>>>> +{
>>>>>>> +}
>>>>>>>  
>>>>>>>  #endif /* CONFIG_PCI_IOV */
> .
> 

Re: [PATCH] PCI: Reset IOV state on FLR to PF

[Lukasz Maniak]

On Tue, Jan 18, 2022 at 07:07:23PM +0800, Yicong Yang wrote:
> On 2022/1/18 6:55, Bjorn Helgaas wrote:
> > [+cc Alex in case he has comments on how FLR should work on
> > non-conforming hns3 devices]
> > 
> > On Sat, Jan 15, 2022 at 05:22:19PM +0800, Yicong Yang wrote:
> >> On 2022/1/15 0:37, Bjorn Helgaas wrote:
> >>> On Fri, Jan 14, 2022 at 05:42:48PM +0800, Yicong Yang wrote:
> >>>> On 2022/1/14 0:45, Lukasz Maniak wrote:
> >>>>> On Wed, Jan 12, 2022 at 08:49:03AM -0600, Bjorn Helgaas wrote:
> >>>>>> On Wed, Dec 22, 2021 at 08:19:57PM +0100, Lukasz Maniak wrote:
> >>>>>>> As per PCI Express specification, FLR to a PF resets the PF state as
> >>>>>>> well as the SR-IOV extended capability including VF Enable which means
> >>>>>>> that VFs no longer exist.
> >>>>>>
> >>>>>> Can you add a specific reference to the spec, please?
> >>>>>>
> >>>>> Following the Single Root I/O Virtualization and Sharing Specification:
> >>>>> 2.2.3. FLR That Targets a PF
> >>>>> PFs must support FLR.
> >>>>> FLR to a PF resets the PF state as well as the SR-IOV extended
> >>>>> capability including VF Enable which means that VFs no longer exist.
> >>>>>
> >>>>> For PCI Express Base Specification Revision 5.0 and later, this is
> >>>>> section 9.2.2.3.
> >>>
> >>> This is also the section in the new PCIe r6.0.  Let's use that.
> >>>
> >>>>>>> Currently, the IOV state is not updated during FLR, resulting in
> >>>>>>> non-compliant PCI driver behavior.
> >>>>>>
> >>>>>> And include a little detail about what problem is observed?  How would
> >>>>>> a user know this problem is occurring?
> >>>>>>
> >>>>> The problem is that the state of the kernel and HW as to the number of
> >>>>> VFs gets out of sync after FLR.
> >>>>>
> >>>>> This results in further listing, after the FLR is performed by the HW,
> >>>>> of VFs that actually no longer exist and should no longer be reported on
> >>>>> the PCI bus. lspci return FFs for these VFs.
> >>>>
> >>>> There're some exceptions. Take HiSilicon's hns3 and sec device as an
> >>>> example, the VF won't be destroyed after the FLR reset.
> >>>
> >>> If FLR on an hns3 PF does *not* clear VF Enable, and the VFs still
> >>> exist after FLR, isn't that a violation of sec 9.2.2.3?
> >>
> >> yes I think it's a violation to the spec.
> > 
> > Thanks for confirming that.
> > 
> >>> If hns3 and sec don't conform to the spec, we should have some sort of
> >>> quirk that serves to document and work around this.
> >>
> >> ok I think it'll help. Do you mean something like this based on this patch:
> >>
> >> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> >> index 69ee321027b4..0e4976c669b2 100644
> >> --- a/drivers/pci/iov.c
> >> +++ b/drivers/pci/iov.c
> >> @@ -1025,6 +1025,8 @@ void pci_reset_iov_state(struct pci_dev *dev)
> >>  		return;
> >>  	if (!iov->num_VFs)
> >>  		return;
> >> +	if (dev->flr_no_vf_reset)
> >> +		return;
> >>
> >>  	sriov_del_vfs(dev);
> >>
> >> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> >> index 003950c738d2..c8ffcb0ac612 100644
> >> --- a/drivers/pci/quirks.c
> >> +++ b/drivers/pci/quirks.c
> >> @@ -1860,6 +1860,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa256, quirk_huawei_pcie_sva);
> >>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa258, quirk_huawei_pcie_sva);
> >>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa259, quirk_huawei_pcie_sva);
> >>
> >> +/*
> >> + * Some HiSilicon PCIe devices' VF won't be destroyed after a FLR reset.
> >> + * Don't reset these devices' IOV state when doing FLR.
> >> + */
> >> +static void quirk_huawei_pcie_flr(struct pci_dev *pdev)
> >> +{
> >> +	pdev->flr_no_vf_reset = 1;
> >> +}
> >> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa255, quirk_huawei_pcie_flr);
> >> +/* ...some other devices have this quirk */
> > 
> > Yes, I think something along this line will help.
> > 
> >> diff --git a/include/linux/pci.h b/include/linux/pci.h
> >> index 18a75c8e615c..e62f9fa4d48f 100644
> >> --- a/include/linux/pci.h
> >> +++ b/include/linux/pci.h
> >> @@ -454,6 +454,7 @@ struct pci_dev {
> >>  	unsigned int	is_probed:1;		/* Device probing in progress */
> >>  	unsigned int	link_active_reporting:1;/* Device capable of reporting link active */
> >>  	unsigned int	no_vf_scan:1;		/* Don't scan for VFs after IOV enablement */
> >> +	unsigned int	flr_no_vf_reset:1;	/* VF won't be destroyed after PF's FLR */
> >>
> >>>> Currently the transactions with the VF will be restored after the
> >>>> FLR. But this patch will break that, the VF is fully disabled and
> >>>> the transaction cannot be restored. User needs to reconfigure it,
> >>>> which is unnecessary before this patch.
> >>>
> >>> What does it mean for a "transaction to be restored"?  Maybe you mean
> >>> this patch removes the *VFs* via sriov_del_vfs(), and whoever
> >>> initiated the FLR would need to re-enable VFs via pci_enable_sriov()
> >>> or something similar?
> >>
> >> Partly. It'll also terminate the VF users.
> >> Think that I attach the VF of hns to a VM by vfio and ping the network
> >> in the VM, when doing FLR the 'ping' will pause and after FLR it'll
> >> resume. Currenlty The driver handle this in the ->reset_{prepare, done}()
> >> methods. The user of VM may not realize there is a FLR of the PF as the
> >> VF always exists and the 'ping' is never terminated.
> >>
> >> If we remove the VF when doing FLR, then 1) we'll block in the VF->remove()
> >> until no one is using the device, for example the 'ping' is finished.
> >> 2) the VF in the VM no longer exists and we have to re-enable VF and hotplug
> >> it into the VM and restart the ping. That's a big difference.
> >>
> >>> If FLR disables VFs, it seems like we should expect to have to
> >>> re-enable them if we want them.
> >>
> >> It involves a remove()/probe() process of the VF driver and the user
> >> of the VF will be terminated, just like the situation illustrated
> >> above.
> > 
> > I think users of FLR should be able to rely on it working per spec,
> > i.e., that VFs will be destroyed.  If hardware like hns3 doesn't do
> > that, the quirk should work around that in software by doing it
> > explicitly.
> > 
> > I don't think the non-standard behavior should be exposed to the
> > users.  The user should not have to know about this hns3 issue.
> > 
> > If FLR on a standard NIC terminates a ping on a VF, FLR on an hns3 NIC
> > should also terminate a ping on a VF.
> > 
> 
> ok thanks for the discussion, agree on that. According to the spec, after
> the FLR to the PF the VF does not exist anymore, so the ping will be terminated.
> Our hns3 and sec team are still evaluating it before coming to a solution of
> whether using a quirk or comform to the spec.
> 
> For this patch it looks reasonable to me, but some questions about the code below.
> 
> >>>> Can we handle this problem in another way? Maybe test the VF's
> >>>> vendor device ID after the FLR reset to see whether it has really
> >>>> gone or not?
> >>>>
> >>>>> sriov_numvfs in sysfs returns old invalid value and does not allow
> >>>>> setting a new value before explicitly setting 0 in the first place.
> >>>>>
> >>>>>>> This patch introduces a simple function, called on the FLR path, that
> >>>>>>> removes the virtual function devices from the PCI bus and their
> >>>>>>> corresponding sysfs links with a final clear of the num_vfs value in IOV
> >>>>>>> state.
> >>>>>>>
> >>>>>>> Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
> >>>>>>> ---
> >>>>>>>  drivers/pci/iov.c | 21 +++++++++++++++++++++
> >>>>>>>  drivers/pci/pci.c |  2 ++
> >>>>>>>  drivers/pci/pci.h |  4 ++++
> >>>>>>>  3 files changed, 27 insertions(+)
> >>>>>>>
> >>>>>>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> >>>>>>> index 0267977c9f17..69ee321027b4 100644
> >>>>>>> --- a/drivers/pci/iov.c
> >>>>>>> +++ b/drivers/pci/iov.c
> >>>>>>> @@ -1013,6 +1013,27 @@ int pci_iov_bus_range(struct pci_bus *bus)
> >>>>>>>  	return max ? max - bus->number : 0;
> >>>>>>>  }
> >>>>>>>  
> >>>>>>> +/**
> >>>>>>> + * pci_reset_iov_state - reset the state of the IOV capability
> >>>>>>> + * @dev: the PCI device
> >>>>>>> + */
> >>>>>>> +void pci_reset_iov_state(struct pci_dev *dev)
> >>>>>>> +{
> >>>>>>> +	struct pci_sriov *iov = dev->sriov;
> >>>>>>> +
> >>>>>>> +	if (!dev->is_physfn)
> >>>>>>> +		return;
> >>>>>>> +	if (!iov->num_VFs)
> >>>>>>> +		return;
> >>>>>>> +
> >>>>>>> +	sriov_del_vfs(dev);
> >>>>>>> +
> >>>>>>> +	if (iov->link != dev->devfn)
> >>>>>>> +		sysfs_remove_link(&dev->dev.kobj, "dep_link");
> >>>>>>> +
> >>>>>>> +	iov->num_VFs = 0;
> >>>>>>> +}
> >>>>>>> +
> 
> Any reason for not using pci_disable_sriov()?

The issue with pci_disable_sriov() is that it calls sriov_disable(),
which directly uses pci_cfg_access_lock(), leading to deadlock on the
FLR path.

> 
> With the spec the related registers in the SRIOV cap will be reset so
> it's ok in general. But for some devices not following the spec like hns3,
> some fields like VF enable won't be reset and keep enabled after the FLR.
> In this case after the FLR the VF devices in the system has gone but
> the state of the PF SRIOV cap leaves uncleared. pci_disable_sriov()
> will reset the whole SRIOV cap. It'll also call pcibios_sriov_disable()
> to correct handle the VF disabling on some platforms, IIUC.
> 
> Or is it better to use pdev->driver->sriov_configure(pdev,0)?
> PF drivers must implement ->sriov_configure() for enabling/disabling
> the VF but we totally skip the PF driver here.
> 
> Thanks,
> Yicong
> 
> >>>>>>>  /**
> >>>>>>>   * pci_enable_sriov - enable the SR-IOV capability
> >>>>>>>   * @dev: the PCI device
> >>>>>>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> >>>>>>> index 3d2fb394986a..535f19d37e8d 100644
> >>>>>>> --- a/drivers/pci/pci.c
> >>>>>>> +++ b/drivers/pci/pci.c
> >>>>>>> @@ -4694,6 +4694,8 @@ EXPORT_SYMBOL(pci_wait_for_pending_transaction);
> >>>>>>>   */
> >>>>>>>  int pcie_flr(struct pci_dev *dev)
> >>>>>>>  {
> >>>>>>> +	pci_reset_iov_state(dev);
> >>>>>>> +
> >>>>>>>  	if (!pci_wait_for_pending_transaction(dev))
> >>>>>>>  		pci_err(dev, "timed out waiting for pending transaction; performing function level reset anyway\n");
> >>>>>>>  
> >>>>>>> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> >>>>>>> index 3d60cabde1a1..7bb144fbec76 100644
> >>>>>>> --- a/drivers/pci/pci.h
> >>>>>>> +++ b/drivers/pci/pci.h
> >>>>>>> @@ -480,6 +480,7 @@ void pci_iov_update_resource(struct pci_dev *dev, int resno);
> >>>>>>>  resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
> >>>>>>>  void pci_restore_iov_state(struct pci_dev *dev);
> >>>>>>>  int pci_iov_bus_range(struct pci_bus *bus);
> >>>>>>> +void pci_reset_iov_state(struct pci_dev *dev);
> >>>>>>>  extern const struct attribute_group sriov_pf_dev_attr_group;
> >>>>>>>  extern const struct attribute_group sriov_vf_dev_attr_group;
> >>>>>>>  #else
> >>>>>>> @@ -501,6 +502,9 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
> >>>>>>>  {
> >>>>>>>  	return 0;
> >>>>>>>  }
> >>>>>>> +static inline void pci_reset_iov_state(struct pci_dev *dev)
> >>>>>>> +{
> >>>>>>> +}
> >>>>>>>  
> >>>>>>>  #endif /* CONFIG_PCI_IOV */
> > .
> > 

Re: [PATCH] PCI: Reset IOV state on FLR to PF

[Yicong Yang]

On 2022/1/19 0:30, Lukasz Maniak wrote:
> On Tue, Jan 18, 2022 at 07:07:23PM +0800, Yicong Yang wrote:
>> On 2022/1/18 6:55, Bjorn Helgaas wrote:
>>> [+cc Alex in case he has comments on how FLR should work on
>>> non-conforming hns3 devices]
>>>
>>> On Sat, Jan 15, 2022 at 05:22:19PM +0800, Yicong Yang wrote:
>>>> On 2022/1/15 0:37, Bjorn Helgaas wrote:
>>>>> On Fri, Jan 14, 2022 at 05:42:48PM +0800, Yicong Yang wrote:
>>>>>> On 2022/1/14 0:45, Lukasz Maniak wrote:
>>>>>>> On Wed, Jan 12, 2022 at 08:49:03AM -0600, Bjorn Helgaas wrote:
>>>>>>>> On Wed, Dec 22, 2021 at 08:19:57PM +0100, Lukasz Maniak wrote:
>>>>>>>>> As per PCI Express specification, FLR to a PF resets the PF state as
>>>>>>>>> well as the SR-IOV extended capability including VF Enable which means
>>>>>>>>> that VFs no longer exist.
>>>>>>>>
>>>>>>>> Can you add a specific reference to the spec, please?
>>>>>>>>
>>>>>>> Following the Single Root I/O Virtualization and Sharing Specification:
>>>>>>> 2.2.3. FLR That Targets a PF
>>>>>>> PFs must support FLR.
>>>>>>> FLR to a PF resets the PF state as well as the SR-IOV extended
>>>>>>> capability including VF Enable which means that VFs no longer exist.
>>>>>>>
>>>>>>> For PCI Express Base Specification Revision 5.0 and later, this is
>>>>>>> section 9.2.2.3.
>>>>>
>>>>> This is also the section in the new PCIe r6.0.  Let's use that.
>>>>>
>>>>>>>>> Currently, the IOV state is not updated during FLR, resulting in
>>>>>>>>> non-compliant PCI driver behavior.
>>>>>>>>
>>>>>>>> And include a little detail about what problem is observed?  How would
>>>>>>>> a user know this problem is occurring?
>>>>>>>>
>>>>>>> The problem is that the state of the kernel and HW as to the number of
>>>>>>> VFs gets out of sync after FLR.
>>>>>>>
>>>>>>> This results in further listing, after the FLR is performed by the HW,
>>>>>>> of VFs that actually no longer exist and should no longer be reported on
>>>>>>> the PCI bus. lspci return FFs for these VFs.
>>>>>>
>>>>>> There're some exceptions. Take HiSilicon's hns3 and sec device as an
>>>>>> example, the VF won't be destroyed after the FLR reset.
>>>>>
>>>>> If FLR on an hns3 PF does *not* clear VF Enable, and the VFs still
>>>>> exist after FLR, isn't that a violation of sec 9.2.2.3?
>>>>
>>>> yes I think it's a violation to the spec.
>>>
>>> Thanks for confirming that.
>>>
>>>>> If hns3 and sec don't conform to the spec, we should have some sort of
>>>>> quirk that serves to document and work around this.
>>>>
>>>> ok I think it'll help. Do you mean something like this based on this patch:
>>>>
>>>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
>>>> index 69ee321027b4..0e4976c669b2 100644
>>>> --- a/drivers/pci/iov.c
>>>> +++ b/drivers/pci/iov.c
>>>> @@ -1025,6 +1025,8 @@ void pci_reset_iov_state(struct pci_dev *dev)
>>>>  		return;
>>>>  	if (!iov->num_VFs)
>>>>  		return;
>>>> +	if (dev->flr_no_vf_reset)
>>>> +		return;
>>>>
>>>>  	sriov_del_vfs(dev);
>>>>
>>>> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
>>>> index 003950c738d2..c8ffcb0ac612 100644
>>>> --- a/drivers/pci/quirks.c
>>>> +++ b/drivers/pci/quirks.c
>>>> @@ -1860,6 +1860,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa256, quirk_huawei_pcie_sva);
>>>>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa258, quirk_huawei_pcie_sva);
>>>>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa259, quirk_huawei_pcie_sva);
>>>>
>>>> +/*
>>>> + * Some HiSilicon PCIe devices' VF won't be destroyed after a FLR reset.
>>>> + * Don't reset these devices' IOV state when doing FLR.
>>>> + */
>>>> +static void quirk_huawei_pcie_flr(struct pci_dev *pdev)
>>>> +{
>>>> +	pdev->flr_no_vf_reset = 1;
>>>> +}
>>>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa255, quirk_huawei_pcie_flr);
>>>> +/* ...some other devices have this quirk */
>>>
>>> Yes, I think something along this line will help.
>>>
>>>> diff --git a/include/linux/pci.h b/include/linux/pci.h
>>>> index 18a75c8e615c..e62f9fa4d48f 100644
>>>> --- a/include/linux/pci.h
>>>> +++ b/include/linux/pci.h
>>>> @@ -454,6 +454,7 @@ struct pci_dev {
>>>>  	unsigned int	is_probed:1;		/* Device probing in progress */
>>>>  	unsigned int	link_active_reporting:1;/* Device capable of reporting link active */
>>>>  	unsigned int	no_vf_scan:1;		/* Don't scan for VFs after IOV enablement */
>>>> +	unsigned int	flr_no_vf_reset:1;	/* VF won't be destroyed after PF's FLR */
>>>>
>>>>>> Currently the transactions with the VF will be restored after the
>>>>>> FLR. But this patch will break that, the VF is fully disabled and
>>>>>> the transaction cannot be restored. User needs to reconfigure it,
>>>>>> which is unnecessary before this patch.
>>>>>
>>>>> What does it mean for a "transaction to be restored"?  Maybe you mean
>>>>> this patch removes the *VFs* via sriov_del_vfs(), and whoever
>>>>> initiated the FLR would need to re-enable VFs via pci_enable_sriov()
>>>>> or something similar?
>>>>
>>>> Partly. It'll also terminate the VF users.
>>>> Think that I attach the VF of hns to a VM by vfio and ping the network
>>>> in the VM, when doing FLR the 'ping' will pause and after FLR it'll
>>>> resume. Currenlty The driver handle this in the ->reset_{prepare, done}()
>>>> methods. The user of VM may not realize there is a FLR of the PF as the
>>>> VF always exists and the 'ping' is never terminated.
>>>>
>>>> If we remove the VF when doing FLR, then 1) we'll block in the VF->remove()
>>>> until no one is using the device, for example the 'ping' is finished.
>>>> 2) the VF in the VM no longer exists and we have to re-enable VF and hotplug
>>>> it into the VM and restart the ping. That's a big difference.
>>>>
>>>>> If FLR disables VFs, it seems like we should expect to have to
>>>>> re-enable them if we want them.
>>>>
>>>> It involves a remove()/probe() process of the VF driver and the user
>>>> of the VF will be terminated, just like the situation illustrated
>>>> above.
>>>
>>> I think users of FLR should be able to rely on it working per spec,
>>> i.e., that VFs will be destroyed.  If hardware like hns3 doesn't do
>>> that, the quirk should work around that in software by doing it
>>> explicitly.
>>>
>>> I don't think the non-standard behavior should be exposed to the
>>> users.  The user should not have to know about this hns3 issue.
>>>
>>> If FLR on a standard NIC terminates a ping on a VF, FLR on an hns3 NIC
>>> should also terminate a ping on a VF.
>>>
>>
>> ok thanks for the discussion, agree on that. According to the spec, after
>> the FLR to the PF the VF does not exist anymore, so the ping will be terminated.
>> Our hns3 and sec team are still evaluating it before coming to a solution of
>> whether using a quirk or comform to the spec.
>>
>> For this patch it looks reasonable to me, but some questions about the code below.
>>
>>>>>> Can we handle this problem in another way? Maybe test the VF's
>>>>>> vendor device ID after the FLR reset to see whether it has really
>>>>>> gone or not?
>>>>>>
>>>>>>> sriov_numvfs in sysfs returns old invalid value and does not allow
>>>>>>> setting a new value before explicitly setting 0 in the first place.
>>>>>>>
>>>>>>>>> This patch introduces a simple function, called on the FLR path, that
>>>>>>>>> removes the virtual function devices from the PCI bus and their
>>>>>>>>> corresponding sysfs links with a final clear of the num_vfs value in IOV
>>>>>>>>> state.
>>>>>>>>>
>>>>>>>>> Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
>>>>>>>>> ---
>>>>>>>>>  drivers/pci/iov.c | 21 +++++++++++++++++++++
>>>>>>>>>  drivers/pci/pci.c |  2 ++
>>>>>>>>>  drivers/pci/pci.h |  4 ++++
>>>>>>>>>  3 files changed, 27 insertions(+)
>>>>>>>>>
>>>>>>>>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
>>>>>>>>> index 0267977c9f17..69ee321027b4 100644
>>>>>>>>> --- a/drivers/pci/iov.c
>>>>>>>>> +++ b/drivers/pci/iov.c
>>>>>>>>> @@ -1013,6 +1013,27 @@ int pci_iov_bus_range(struct pci_bus *bus)
>>>>>>>>>  	return max ? max - bus->number : 0;
>>>>>>>>>  }
>>>>>>>>>  
>>>>>>>>> +/**
>>>>>>>>> + * pci_reset_iov_state - reset the state of the IOV capability
>>>>>>>>> + * @dev: the PCI device
>>>>>>>>> + */
>>>>>>>>> +void pci_reset_iov_state(struct pci_dev *dev)
>>>>>>>>> +{
>>>>>>>>> +	struct pci_sriov *iov = dev->sriov;
>>>>>>>>> +
>>>>>>>>> +	if (!dev->is_physfn)
>>>>>>>>> +		return;
>>>>>>>>> +	if (!iov->num_VFs)
>>>>>>>>> +		return;
>>>>>>>>> +
>>>>>>>>> +	sriov_del_vfs(dev);
>>>>>>>>> +
>>>>>>>>> +	if (iov->link != dev->devfn)
>>>>>>>>> +		sysfs_remove_link(&dev->dev.kobj, "dep_link");
>>>>>>>>> +
>>>>>>>>> +	iov->num_VFs = 0;
>>>>>>>>> +}
>>>>>>>>> +
>>
>> Any reason for not using pci_disable_sriov()?
> 
> The issue with pci_disable_sriov() is that it calls sriov_disable(),
> which directly uses pci_cfg_access_lock(), leading to deadlock on the
> FLR path.
> 

That'll be a problem. Well my main concern is whether the VFs will be reset
correctly through pci_reset_iov_state() as it lacks the participant of
PF driver and bios (seems may needed only on powerpc, not sure), which is
necessary in the enable/disable routine through $pci_dev/sriov_numvfs.

>>
>> With the spec the related registers in the SRIOV cap will be reset so
>> it's ok in general. But for some devices not following the spec like hns3,
>> some fields like VF enable won't be reset and keep enabled after the FLR.
>> In this case after the FLR the VF devices in the system has gone but
>> the state of the PF SRIOV cap leaves uncleared. pci_disable_sriov()
>> will reset the whole SRIOV cap. It'll also call pcibios_sriov_disable()
>> to correct handle the VF disabling on some platforms, IIUC.
>>
>> Or is it better to use pdev->driver->sriov_configure(pdev,0)?
>> PF drivers must implement ->sriov_configure() for enabling/disabling
>> the VF but we totally skip the PF driver here.
>>
>> Thanks,
>> Yicong
>>
>>>>>>>>>  /**
>>>>>>>>>   * pci_enable_sriov - enable the SR-IOV capability
>>>>>>>>>   * @dev: the PCI device
>>>>>>>>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>>>>>>>>> index 3d2fb394986a..535f19d37e8d 100644
>>>>>>>>> --- a/drivers/pci/pci.c
>>>>>>>>> +++ b/drivers/pci/pci.c
>>>>>>>>> @@ -4694,6 +4694,8 @@ EXPORT_SYMBOL(pci_wait_for_pending_transaction);
>>>>>>>>>   */
>>>>>>>>>  int pcie_flr(struct pci_dev *dev)
>>>>>>>>>  {
>>>>>>>>> +	pci_reset_iov_state(dev);
>>>>>>>>> +
>>>>>>>>>  	if (!pci_wait_for_pending_transaction(dev))
>>>>>>>>>  		pci_err(dev, "timed out waiting for pending transaction; performing function level reset anyway\n");
>>>>>>>>>  
>>>>>>>>> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
>>>>>>>>> index 3d60cabde1a1..7bb144fbec76 100644
>>>>>>>>> --- a/drivers/pci/pci.h
>>>>>>>>> +++ b/drivers/pci/pci.h
>>>>>>>>> @@ -480,6 +480,7 @@ void pci_iov_update_resource(struct pci_dev *dev, int resno);
>>>>>>>>>  resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
>>>>>>>>>  void pci_restore_iov_state(struct pci_dev *dev);
>>>>>>>>>  int pci_iov_bus_range(struct pci_bus *bus);
>>>>>>>>> +void pci_reset_iov_state(struct pci_dev *dev);
>>>>>>>>>  extern const struct attribute_group sriov_pf_dev_attr_group;
>>>>>>>>>  extern const struct attribute_group sriov_vf_dev_attr_group;
>>>>>>>>>  #else
>>>>>>>>> @@ -501,6 +502,9 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
>>>>>>>>>  {
>>>>>>>>>  	return 0;
>>>>>>>>>  }
>>>>>>>>> +static inline void pci_reset_iov_state(struct pci_dev *dev)
>>>>>>>>> +{
>>>>>>>>> +}
>>>>>>>>>  
>>>>>>>>>  #endif /* CONFIG_PCI_IOV */
>>> .
>>>
> .
> 

Re: [PATCH] PCI: Reset IOV state on FLR to PF

[Yicong Yang]

Hi Lukasz, Bjorn,

FYI, I tested with Mellanox CX-5, the VF also exists after FLR. Here's the operation:

[root@localhost ~]# lspci  -s 01:
01:00.0 Ethernet controller: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
01:00.1 Ethernet controller: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
[root@localhost ~]# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
        Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
                IOVCap: Migration- 10BitTagReq- Interrupt Message Number: 000
                IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+ 10BitTagReq-
                IOVSta: Migration-
                Initial VFs: 16, Total VFs: 16, Number of VFs: 0, Function Dependency Link: 00
                VF offset: 2, stride: 1, Device ID: 101a
                VF Migration: offset: 00000000, BIR: 0
[root@localhost 0000:01:00.0]# echo 1 > sriov_numvfs
[root@localhost ~]# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
        Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
                IOVCap: Migration- 10BitTagReq- Interrupt Message Number: 000
                IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+ 10BitTagReq-
                IOVSta: Migration-
                Initial VFs: 16, Total VFs: 16, Number of VFs: 1, Function Dependency Link: 00
                VF offset: 2, stride: 1, Device ID: 101a
                VF Migration: offset: 00000000, BIR: 0
[root@localhost 0000:01:00.0]# echo 1 > reset
[root@localhost ~]# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
        Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
                IOVCap: Migration- 10BitTagReq- Interrupt Message Number: 000
                IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+ 10BitTagReq-
                IOVSta: Migration-
                Initial VFs: 16, Total VFs: 16, Number of VFs: 1, Function Dependency Link: 00
                VF offset: 2, stride: 1, Device ID: 101a
                VF Migration: offset: 00000000, BIR: 0
[root@localhost ~]# lspci -xxx -s 01:00.0
01:00.0 Ethernet controller: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
00: b3 15 19 10 46 05 10 00 00 00 00 02 08 00 80 00
10: 0c 00 00 00 00 08 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 b3 15 08 00
30: 00 00 70 e6 60 00 00 00 00 00 00 00 ff 01 00 00
40: 01 00 c3 81 08 00 00 00 03 9c cc 80 00 78 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 01
60: 10 48 02 00 e2 8f e0 11 5f 29 00 00 04 71 41 00
70: 08 00 04 11 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 17 00 01 00 40 00 00 00 1e 00 80 01
90: 04 00 1e 00 00 00 00 00 00 00 00 00 11 c0 3f 80
a0: 00 20 00 00 00 30 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 09 40 18 00 0a 00 00 20 f0 1a 00 00 00 00 00 00
d0: 20 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[root@localhost 0000:01:00.0]# cat reset_method
flr bus

On 2022/1/19 10:47, Yicong Yang wrote:
> On 2022/1/19 0:30, Lukasz Maniak wrote:
>> On Tue, Jan 18, 2022 at 07:07:23PM +0800, Yicong Yang wrote:
>>> On 2022/1/18 6:55, Bjorn Helgaas wrote:
>>>> [+cc Alex in case he has comments on how FLR should work on
>>>> non-conforming hns3 devices]
>>>>
>>>> On Sat, Jan 15, 2022 at 05:22:19PM +0800, Yicong Yang wrote:
>>>>> On 2022/1/15 0:37, Bjorn Helgaas wrote:
>>>>>> On Fri, Jan 14, 2022 at 05:42:48PM +0800, Yicong Yang wrote:
>>>>>>> On 2022/1/14 0:45, Lukasz Maniak wrote:
>>>>>>>> On Wed, Jan 12, 2022 at 08:49:03AM -0600, Bjorn Helgaas wrote:
>>>>>>>>> On Wed, Dec 22, 2021 at 08:19:57PM +0100, Lukasz Maniak wrote:
>>>>>>>>>> As per PCI Express specification, FLR to a PF resets the PF state as
>>>>>>>>>> well as the SR-IOV extended capability including VF Enable which means
>>>>>>>>>> that VFs no longer exist.
>>>>>>>>>
>>>>>>>>> Can you add a specific reference to the spec, please?
>>>>>>>>>
>>>>>>>> Following the Single Root I/O Virtualization and Sharing Specification:
>>>>>>>> 2.2.3. FLR That Targets a PF
>>>>>>>> PFs must support FLR.
>>>>>>>> FLR to a PF resets the PF state as well as the SR-IOV extended
>>>>>>>> capability including VF Enable which means that VFs no longer exist.
>>>>>>>>
>>>>>>>> For PCI Express Base Specification Revision 5.0 and later, this is
>>>>>>>> section 9.2.2.3.
>>>>>>
>>>>>> This is also the section in the new PCIe r6.0.  Let's use that.
>>>>>>
>>>>>>>>>> Currently, the IOV state is not updated during FLR, resulting in
>>>>>>>>>> non-compliant PCI driver behavior.
>>>>>>>>>
>>>>>>>>> And include a little detail about what problem is observed?  How would
>>>>>>>>> a user know this problem is occurring?
>>>>>>>>>
>>>>>>>> The problem is that the state of the kernel and HW as to the number of
>>>>>>>> VFs gets out of sync after FLR.
>>>>>>>>
>>>>>>>> This results in further listing, after the FLR is performed by the HW,
>>>>>>>> of VFs that actually no longer exist and should no longer be reported on
>>>>>>>> the PCI bus. lspci return FFs for these VFs.
>>>>>>>
>>>>>>> There're some exceptions. Take HiSilicon's hns3 and sec device as an
>>>>>>> example, the VF won't be destroyed after the FLR reset.
>>>>>>
>>>>>> If FLR on an hns3 PF does *not* clear VF Enable, and the VFs still
>>>>>> exist after FLR, isn't that a violation of sec 9.2.2.3?
>>>>>
>>>>> yes I think it's a violation to the spec.
>>>>
>>>> Thanks for confirming that.
>>>>
>>>>>> If hns3 and sec don't conform to the spec, we should have some sort of
>>>>>> quirk that serves to document and work around this.
>>>>>
>>>>> ok I think it'll help. Do you mean something like this based on this patch:
>>>>>
>>>>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
>>>>> index 69ee321027b4..0e4976c669b2 100644
>>>>> --- a/drivers/pci/iov.c
>>>>> +++ b/drivers/pci/iov.c
>>>>> @@ -1025,6 +1025,8 @@ void pci_reset_iov_state(struct pci_dev *dev)
>>>>>  		return;
>>>>>  	if (!iov->num_VFs)
>>>>>  		return;
>>>>> +	if (dev->flr_no_vf_reset)
>>>>> +		return;
>>>>>
>>>>>  	sriov_del_vfs(dev);
>>>>>
>>>>> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
>>>>> index 003950c738d2..c8ffcb0ac612 100644
>>>>> --- a/drivers/pci/quirks.c
>>>>> +++ b/drivers/pci/quirks.c
>>>>> @@ -1860,6 +1860,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa256, quirk_huawei_pcie_sva);
>>>>>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa258, quirk_huawei_pcie_sva);
>>>>>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa259, quirk_huawei_pcie_sva);
>>>>>
>>>>> +/*
>>>>> + * Some HiSilicon PCIe devices' VF won't be destroyed after a FLR reset.
>>>>> + * Don't reset these devices' IOV state when doing FLR.
>>>>> + */
>>>>> +static void quirk_huawei_pcie_flr(struct pci_dev *pdev)
>>>>> +{
>>>>> +	pdev->flr_no_vf_reset = 1;
>>>>> +}
>>>>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa255, quirk_huawei_pcie_flr);
>>>>> +/* ...some other devices have this quirk */
>>>>
>>>> Yes, I think something along this line will help.
>>>>
>>>>> diff --git a/include/linux/pci.h b/include/linux/pci.h
>>>>> index 18a75c8e615c..e62f9fa4d48f 100644
>>>>> --- a/include/linux/pci.h
>>>>> +++ b/include/linux/pci.h
>>>>> @@ -454,6 +454,7 @@ struct pci_dev {
>>>>>  	unsigned int	is_probed:1;		/* Device probing in progress */
>>>>>  	unsigned int	link_active_reporting:1;/* Device capable of reporting link active */
>>>>>  	unsigned int	no_vf_scan:1;		/* Don't scan for VFs after IOV enablement */
>>>>> +	unsigned int	flr_no_vf_reset:1;	/* VF won't be destroyed after PF's FLR */
>>>>>
>>>>>>> Currently the transactions with the VF will be restored after the
>>>>>>> FLR. But this patch will break that, the VF is fully disabled and
>>>>>>> the transaction cannot be restored. User needs to reconfigure it,
>>>>>>> which is unnecessary before this patch.
>>>>>>
>>>>>> What does it mean for a "transaction to be restored"?  Maybe you mean
>>>>>> this patch removes the *VFs* via sriov_del_vfs(), and whoever
>>>>>> initiated the FLR would need to re-enable VFs via pci_enable_sriov()
>>>>>> or something similar?
>>>>>
>>>>> Partly. It'll also terminate the VF users.
>>>>> Think that I attach the VF of hns to a VM by vfio and ping the network
>>>>> in the VM, when doing FLR the 'ping' will pause and after FLR it'll
>>>>> resume. Currenlty The driver handle this in the ->reset_{prepare, done}()
>>>>> methods. The user of VM may not realize there is a FLR of the PF as the
>>>>> VF always exists and the 'ping' is never terminated.
>>>>>
>>>>> If we remove the VF when doing FLR, then 1) we'll block in the VF->remove()
>>>>> until no one is using the device, for example the 'ping' is finished.
>>>>> 2) the VF in the VM no longer exists and we have to re-enable VF and hotplug
>>>>> it into the VM and restart the ping. That's a big difference.
>>>>>
>>>>>> If FLR disables VFs, it seems like we should expect to have to
>>>>>> re-enable them if we want them.
>>>>>
>>>>> It involves a remove()/probe() process of the VF driver and the user
>>>>> of the VF will be terminated, just like the situation illustrated
>>>>> above.
>>>>
>>>> I think users of FLR should be able to rely on it working per spec,
>>>> i.e., that VFs will be destroyed.  If hardware like hns3 doesn't do
>>>> that, the quirk should work around that in software by doing it
>>>> explicitly.
>>>>
>>>> I don't think the non-standard behavior should be exposed to the
>>>> users.  The user should not have to know about this hns3 issue.
>>>>
>>>> If FLR on a standard NIC terminates a ping on a VF, FLR on an hns3 NIC
>>>> should also terminate a ping on a VF.
>>>>
>>>
>>> ok thanks for the discussion, agree on that. According to the spec, after
>>> the FLR to the PF the VF does not exist anymore, so the ping will be terminated.
>>> Our hns3 and sec team are still evaluating it before coming to a solution of
>>> whether using a quirk or comform to the spec.
>>>
>>> For this patch it looks reasonable to me, but some questions about the code below.
>>>
>>>>>>> Can we handle this problem in another way? Maybe test the VF's
>>>>>>> vendor device ID after the FLR reset to see whether it has really
>>>>>>> gone or not?
>>>>>>>
>>>>>>>> sriov_numvfs in sysfs returns old invalid value and does not allow
>>>>>>>> setting a new value before explicitly setting 0 in the first place.
>>>>>>>>
>>>>>>>>>> This patch introduces a simple function, called on the FLR path, that
>>>>>>>>>> removes the virtual function devices from the PCI bus and their
>>>>>>>>>> corresponding sysfs links with a final clear of the num_vfs value in IOV
>>>>>>>>>> state.
>>>>>>>>>>
>>>>>>>>>> Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
>>>>>>>>>> ---
>>>>>>>>>>  drivers/pci/iov.c | 21 +++++++++++++++++++++
>>>>>>>>>>  drivers/pci/pci.c |  2 ++
>>>>>>>>>>  drivers/pci/pci.h |  4 ++++
>>>>>>>>>>  3 files changed, 27 insertions(+)
>>>>>>>>>>
>>>>>>>>>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
>>>>>>>>>> index 0267977c9f17..69ee321027b4 100644
>>>>>>>>>> --- a/drivers/pci/iov.c
>>>>>>>>>> +++ b/drivers/pci/iov.c
>>>>>>>>>> @@ -1013,6 +1013,27 @@ int pci_iov_bus_range(struct pci_bus *bus)
>>>>>>>>>>  	return max ? max - bus->number : 0;
>>>>>>>>>>  }
>>>>>>>>>>  
>>>>>>>>>> +/**
>>>>>>>>>> + * pci_reset_iov_state - reset the state of the IOV capability
>>>>>>>>>> + * @dev: the PCI device
>>>>>>>>>> + */
>>>>>>>>>> +void pci_reset_iov_state(struct pci_dev *dev)
>>>>>>>>>> +{
>>>>>>>>>> +	struct pci_sriov *iov = dev->sriov;
>>>>>>>>>> +
>>>>>>>>>> +	if (!dev->is_physfn)
>>>>>>>>>> +		return;
>>>>>>>>>> +	if (!iov->num_VFs)
>>>>>>>>>> +		return;
>>>>>>>>>> +
>>>>>>>>>> +	sriov_del_vfs(dev);
>>>>>>>>>> +
>>>>>>>>>> +	if (iov->link != dev->devfn)
>>>>>>>>>> +		sysfs_remove_link(&dev->dev.kobj, "dep_link");
>>>>>>>>>> +
>>>>>>>>>> +	iov->num_VFs = 0;
>>>>>>>>>> +}
>>>>>>>>>> +
>>>
>>> Any reason for not using pci_disable_sriov()?
>>
>> The issue with pci_disable_sriov() is that it calls sriov_disable(),
>> which directly uses pci_cfg_access_lock(), leading to deadlock on the
>> FLR path.
>>
> 
> That'll be a problem. Well my main concern is whether the VFs will be reset
> correctly through pci_reset_iov_state() as it lacks the participant of
> PF driver and bios (seems may needed only on powerpc, not sure), which is
> necessary in the enable/disable routine through $pci_dev/sriov_numvfs.
> 
>>>
>>> With the spec the related registers in the SRIOV cap will be reset so
>>> it's ok in general. But for some devices not following the spec like hns3,
>>> some fields like VF enable won't be reset and keep enabled after the FLR.
>>> In this case after the FLR the VF devices in the system has gone but
>>> the state of the PF SRIOV cap leaves uncleared. pci_disable_sriov()
>>> will reset the whole SRIOV cap. It'll also call pcibios_sriov_disable()
>>> to correct handle the VF disabling on some platforms, IIUC.
>>>
>>> Or is it better to use pdev->driver->sriov_configure(pdev,0)?
>>> PF drivers must implement ->sriov_configure() for enabling/disabling
>>> the VF but we totally skip the PF driver here.
>>>
>>> Thanks,
>>> Yicong
>>>
>>>>>>>>>>  /**
>>>>>>>>>>   * pci_enable_sriov - enable the SR-IOV capability
>>>>>>>>>>   * @dev: the PCI device
>>>>>>>>>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>>>>>>>>>> index 3d2fb394986a..535f19d37e8d 100644
>>>>>>>>>> --- a/drivers/pci/pci.c
>>>>>>>>>> +++ b/drivers/pci/pci.c
>>>>>>>>>> @@ -4694,6 +4694,8 @@ EXPORT_SYMBOL(pci_wait_for_pending_transaction);
>>>>>>>>>>   */
>>>>>>>>>>  int pcie_flr(struct pci_dev *dev)
>>>>>>>>>>  {
>>>>>>>>>> +	pci_reset_iov_state(dev);
>>>>>>>>>> +
>>>>>>>>>>  	if (!pci_wait_for_pending_transaction(dev))
>>>>>>>>>>  		pci_err(dev, "timed out waiting for pending transaction; performing function level reset anyway\n");
>>>>>>>>>>  
>>>>>>>>>> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
>>>>>>>>>> index 3d60cabde1a1..7bb144fbec76 100644
>>>>>>>>>> --- a/drivers/pci/pci.h
>>>>>>>>>> +++ b/drivers/pci/pci.h
>>>>>>>>>> @@ -480,6 +480,7 @@ void pci_iov_update_resource(struct pci_dev *dev, int resno);
>>>>>>>>>>  resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
>>>>>>>>>>  void pci_restore_iov_state(struct pci_dev *dev);
>>>>>>>>>>  int pci_iov_bus_range(struct pci_bus *bus);
>>>>>>>>>> +void pci_reset_iov_state(struct pci_dev *dev);
>>>>>>>>>>  extern const struct attribute_group sriov_pf_dev_attr_group;
>>>>>>>>>>  extern const struct attribute_group sriov_vf_dev_attr_group;
>>>>>>>>>>  #else
>>>>>>>>>> @@ -501,6 +502,9 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
>>>>>>>>>>  {
>>>>>>>>>>  	return 0;
>>>>>>>>>>  }
>>>>>>>>>> +static inline void pci_reset_iov_state(struct pci_dev *dev)
>>>>>>>>>> +{
>>>>>>>>>> +}
>>>>>>>>>>  
>>>>>>>>>>  #endif /* CONFIG_PCI_IOV */
>>>> .
>>>>
>> .
>>
> .
> 

Re: [PATCH] PCI: Reset IOV state on FLR to PF

[Lukasz Maniak]

On Wed, Jan 19, 2022 at 06:22:07PM +0800, Yicong Yang wrote:
> Hi Lukasz, Bjorn,
> 
> FYI, I tested with Mellanox CX-5, the VF also exists after FLR. Here's the operation:

Did you test with or without my patch?

Here is the result with my patch for the NVMe device in QEMU:

root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -s 01:
01:00.0 Non-Volatile memory controller: Red Hat, Inc. Device 0010 (rev 02)
root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
        Capabilities: [120 v1] Single Root I/O Virtualization (SR-IOV)
                IOVCap: Migration-, Interrupt Message Number: 000
                IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
                IOVSta: Migration-
                Initial VFs: 8, Total VFs: 8, Number of VFs: 0, Function Dependency Link: 00
                VF offset: 1, stride: 1, Device ID: 0010
                VF Migration: offset: 00000000, BIR: 0
root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# echo 1 > sriov_numvfs
root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
        Capabilities: [120 v1] Single Root I/O Virtualization (SR-IOV)
                IOVCap: Migration-, Interrupt Message Number: 000
                IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+
                IOVSta: Migration-
                Initial VFs: 8, Total VFs: 8, Number of VFs: 1, Function Dependency Link: 00
                VF offset: 1, stride: 1, Device ID: 0010
                VF Migration: offset: 00000000, BIR: 0
root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# echo 1 > reset
root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
        Capabilities: [120 v1] Single Root I/O Virtualization (SR-IOV)
                IOVCap: Migration-, Interrupt Message Number: 000
                IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+
                IOVSta: Migration-
                Initial VFs: 8, Total VFs: 8, Number of VFs: 0, Function Dependency Link: 00
                VF offset: 1, stride: 1, Device ID: 0010
                VF Migration: offset: 00000000, BIR: 0
root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -xxx -s 01:00.0
01:00.0 Non-Volatile memory controller: Red Hat, Inc. Device 0010 (rev 02)
00: 36 1b 10 00 07 05 10 00 02 02 08 01 00 00 00 00
10: 04 00 80 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 f4 1a 00 11
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00
40: 11 80 40 80 00 20 00 00 00 30 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 00 03 00 08 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 60 02 00 00 80 00 10 00 00 00 00 11 04 00 00
90: 00 00 11 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 30 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# cat reset_method
flr bus

> 
> [root@localhost ~]# lspci  -s 01:
> 01:00.0 Ethernet controller: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
> 01:00.1 Ethernet controller: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
> [root@localhost ~]# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>         Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
>                 IOVCap: Migration- 10BitTagReq- Interrupt Message Number: 000
>                 IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+ 10BitTagReq-
>                 IOVSta: Migration-
>                 Initial VFs: 16, Total VFs: 16, Number of VFs: 0, Function Dependency Link: 00
>                 VF offset: 2, stride: 1, Device ID: 101a
>                 VF Migration: offset: 00000000, BIR: 0
> [root@localhost 0000:01:00.0]# echo 1 > sriov_numvfs
> [root@localhost ~]# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>         Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
>                 IOVCap: Migration- 10BitTagReq- Interrupt Message Number: 000
>                 IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+ 10BitTagReq-
>                 IOVSta: Migration-
>                 Initial VFs: 16, Total VFs: 16, Number of VFs: 1, Function Dependency Link: 00
>                 VF offset: 2, stride: 1, Device ID: 101a
>                 VF Migration: offset: 00000000, BIR: 0
> [root@localhost 0000:01:00.0]# echo 1 > reset
> [root@localhost ~]# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>         Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
>                 IOVCap: Migration- 10BitTagReq- Interrupt Message Number: 000
>                 IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+ 10BitTagReq-
>                 IOVSta: Migration-
>                 Initial VFs: 16, Total VFs: 16, Number of VFs: 1, Function Dependency Link: 00
>                 VF offset: 2, stride: 1, Device ID: 101a
>                 VF Migration: offset: 00000000, BIR: 0
> [root@localhost ~]# lspci -xxx -s 01:00.0
> 01:00.0 Ethernet controller: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
> 00: b3 15 19 10 46 05 10 00 00 00 00 02 08 00 80 00
> 10: 0c 00 00 00 00 08 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 b3 15 08 00
> 30: 00 00 70 e6 60 00 00 00 00 00 00 00 ff 01 00 00
> 40: 01 00 c3 81 08 00 00 00 03 9c cc 80 00 78 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 01
> 60: 10 48 02 00 e2 8f e0 11 5f 29 00 00 04 71 41 00
> 70: 08 00 04 11 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 17 00 01 00 40 00 00 00 1e 00 80 01
> 90: 04 00 1e 00 00 00 00 00 00 00 00 00 11 c0 3f 80
> a0: 00 20 00 00 00 30 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 09 40 18 00 0a 00 00 20 f0 1a 00 00 00 00 00 00
> d0: 20 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [root@localhost 0000:01:00.0]# cat reset_method
> flr bus
> 
> On 2022/1/19 10:47, Yicong Yang wrote:
> > On 2022/1/19 0:30, Lukasz Maniak wrote:
> >> On Tue, Jan 18, 2022 at 07:07:23PM +0800, Yicong Yang wrote:
> >>> On 2022/1/18 6:55, Bjorn Helgaas wrote:
> >>>> [+cc Alex in case he has comments on how FLR should work on
> >>>> non-conforming hns3 devices]
> >>>>
> >>>> On Sat, Jan 15, 2022 at 05:22:19PM +0800, Yicong Yang wrote:
> >>>>> On 2022/1/15 0:37, Bjorn Helgaas wrote:
> >>>>>> On Fri, Jan 14, 2022 at 05:42:48PM +0800, Yicong Yang wrote:
> >>>>>>> On 2022/1/14 0:45, Lukasz Maniak wrote:
> >>>>>>>> On Wed, Jan 12, 2022 at 08:49:03AM -0600, Bjorn Helgaas wrote:
> >>>>>>>>> On Wed, Dec 22, 2021 at 08:19:57PM +0100, Lukasz Maniak wrote:
> >>>>>>>>>> As per PCI Express specification, FLR to a PF resets the PF state as
> >>>>>>>>>> well as the SR-IOV extended capability including VF Enable which means
> >>>>>>>>>> that VFs no longer exist.
> >>>>>>>>>
> >>>>>>>>> Can you add a specific reference to the spec, please?
> >>>>>>>>>
> >>>>>>>> Following the Single Root I/O Virtualization and Sharing Specification:
> >>>>>>>> 2.2.3. FLR That Targets a PF
> >>>>>>>> PFs must support FLR.
> >>>>>>>> FLR to a PF resets the PF state as well as the SR-IOV extended
> >>>>>>>> capability including VF Enable which means that VFs no longer exist.
> >>>>>>>>
> >>>>>>>> For PCI Express Base Specification Revision 5.0 and later, this is
> >>>>>>>> section 9.2.2.3.
> >>>>>>
> >>>>>> This is also the section in the new PCIe r6.0.  Let's use that.
> >>>>>>
> >>>>>>>>>> Currently, the IOV state is not updated during FLR, resulting in
> >>>>>>>>>> non-compliant PCI driver behavior.
> >>>>>>>>>
> >>>>>>>>> And include a little detail about what problem is observed?  How would
> >>>>>>>>> a user know this problem is occurring?
> >>>>>>>>>
> >>>>>>>> The problem is that the state of the kernel and HW as to the number of
> >>>>>>>> VFs gets out of sync after FLR.
> >>>>>>>>
> >>>>>>>> This results in further listing, after the FLR is performed by the HW,
> >>>>>>>> of VFs that actually no longer exist and should no longer be reported on
> >>>>>>>> the PCI bus. lspci return FFs for these VFs.
> >>>>>>>
> >>>>>>> There're some exceptions. Take HiSilicon's hns3 and sec device as an
> >>>>>>> example, the VF won't be destroyed after the FLR reset.
> >>>>>>
> >>>>>> If FLR on an hns3 PF does *not* clear VF Enable, and the VFs still
> >>>>>> exist after FLR, isn't that a violation of sec 9.2.2.3?
> >>>>>
> >>>>> yes I think it's a violation to the spec.
> >>>>
> >>>> Thanks for confirming that.
> >>>>
> >>>>>> If hns3 and sec don't conform to the spec, we should have some sort of
> >>>>>> quirk that serves to document and work around this.
> >>>>>
> >>>>> ok I think it'll help. Do you mean something like this based on this patch:
> >>>>>
> >>>>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> >>>>> index 69ee321027b4..0e4976c669b2 100644
> >>>>> --- a/drivers/pci/iov.c
> >>>>> +++ b/drivers/pci/iov.c
> >>>>> @@ -1025,6 +1025,8 @@ void pci_reset_iov_state(struct pci_dev *dev)
> >>>>>  		return;
> >>>>>  	if (!iov->num_VFs)
> >>>>>  		return;
> >>>>> +	if (dev->flr_no_vf_reset)
> >>>>> +		return;
> >>>>>
> >>>>>  	sriov_del_vfs(dev);
> >>>>>
> >>>>> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> >>>>> index 003950c738d2..c8ffcb0ac612 100644
> >>>>> --- a/drivers/pci/quirks.c
> >>>>> +++ b/drivers/pci/quirks.c
> >>>>> @@ -1860,6 +1860,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa256, quirk_huawei_pcie_sva);
> >>>>>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa258, quirk_huawei_pcie_sva);
> >>>>>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa259, quirk_huawei_pcie_sva);
> >>>>>
> >>>>> +/*
> >>>>> + * Some HiSilicon PCIe devices' VF won't be destroyed after a FLR reset.
> >>>>> + * Don't reset these devices' IOV state when doing FLR.
> >>>>> + */
> >>>>> +static void quirk_huawei_pcie_flr(struct pci_dev *pdev)
> >>>>> +{
> >>>>> +	pdev->flr_no_vf_reset = 1;
> >>>>> +}
> >>>>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa255, quirk_huawei_pcie_flr);
> >>>>> +/* ...some other devices have this quirk */
> >>>>
> >>>> Yes, I think something along this line will help.
> >>>>
> >>>>> diff --git a/include/linux/pci.h b/include/linux/pci.h
> >>>>> index 18a75c8e615c..e62f9fa4d48f 100644
> >>>>> --- a/include/linux/pci.h
> >>>>> +++ b/include/linux/pci.h
> >>>>> @@ -454,6 +454,7 @@ struct pci_dev {
> >>>>>  	unsigned int	is_probed:1;		/* Device probing in progress */
> >>>>>  	unsigned int	link_active_reporting:1;/* Device capable of reporting link active */
> >>>>>  	unsigned int	no_vf_scan:1;		/* Don't scan for VFs after IOV enablement */
> >>>>> +	unsigned int	flr_no_vf_reset:1;	/* VF won't be destroyed after PF's FLR */
> >>>>>
> >>>>>>> Currently the transactions with the VF will be restored after the
> >>>>>>> FLR. But this patch will break that, the VF is fully disabled and
> >>>>>>> the transaction cannot be restored. User needs to reconfigure it,
> >>>>>>> which is unnecessary before this patch.
> >>>>>>
> >>>>>> What does it mean for a "transaction to be restored"?  Maybe you mean
> >>>>>> this patch removes the *VFs* via sriov_del_vfs(), and whoever
> >>>>>> initiated the FLR would need to re-enable VFs via pci_enable_sriov()
> >>>>>> or something similar?
> >>>>>
> >>>>> Partly. It'll also terminate the VF users.
> >>>>> Think that I attach the VF of hns to a VM by vfio and ping the network
> >>>>> in the VM, when doing FLR the 'ping' will pause and after FLR it'll
> >>>>> resume. Currenlty The driver handle this in the ->reset_{prepare, done}()
> >>>>> methods. The user of VM may not realize there is a FLR of the PF as the
> >>>>> VF always exists and the 'ping' is never terminated.
> >>>>>
> >>>>> If we remove the VF when doing FLR, then 1) we'll block in the VF->remove()
> >>>>> until no one is using the device, for example the 'ping' is finished.
> >>>>> 2) the VF in the VM no longer exists and we have to re-enable VF and hotplug
> >>>>> it into the VM and restart the ping. That's a big difference.
> >>>>>
> >>>>>> If FLR disables VFs, it seems like we should expect to have to
> >>>>>> re-enable them if we want them.
> >>>>>
> >>>>> It involves a remove()/probe() process of the VF driver and the user
> >>>>> of the VF will be terminated, just like the situation illustrated
> >>>>> above.
> >>>>
> >>>> I think users of FLR should be able to rely on it working per spec,
> >>>> i.e., that VFs will be destroyed.  If hardware like hns3 doesn't do
> >>>> that, the quirk should work around that in software by doing it
> >>>> explicitly.
> >>>>
> >>>> I don't think the non-standard behavior should be exposed to the
> >>>> users.  The user should not have to know about this hns3 issue.
> >>>>
> >>>> If FLR on a standard NIC terminates a ping on a VF, FLR on an hns3 NIC
> >>>> should also terminate a ping on a VF.
> >>>>
> >>>
> >>> ok thanks for the discussion, agree on that. According to the spec, after
> >>> the FLR to the PF the VF does not exist anymore, so the ping will be terminated.
> >>> Our hns3 and sec team are still evaluating it before coming to a solution of
> >>> whether using a quirk or comform to the spec.
> >>>
> >>> For this patch it looks reasonable to me, but some questions about the code below.
> >>>
> >>>>>>> Can we handle this problem in another way? Maybe test the VF's
> >>>>>>> vendor device ID after the FLR reset to see whether it has really
> >>>>>>> gone or not?
> >>>>>>>
> >>>>>>>> sriov_numvfs in sysfs returns old invalid value and does not allow
> >>>>>>>> setting a new value before explicitly setting 0 in the first place.
> >>>>>>>>
> >>>>>>>>>> This patch introduces a simple function, called on the FLR path, that
> >>>>>>>>>> removes the virtual function devices from the PCI bus and their
> >>>>>>>>>> corresponding sysfs links with a final clear of the num_vfs value in IOV
> >>>>>>>>>> state.
> >>>>>>>>>>
> >>>>>>>>>> Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
> >>>>>>>>>> ---
> >>>>>>>>>>  drivers/pci/iov.c | 21 +++++++++++++++++++++
> >>>>>>>>>>  drivers/pci/pci.c |  2 ++
> >>>>>>>>>>  drivers/pci/pci.h |  4 ++++
> >>>>>>>>>>  3 files changed, 27 insertions(+)
> >>>>>>>>>>
> >>>>>>>>>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> >>>>>>>>>> index 0267977c9f17..69ee321027b4 100644
> >>>>>>>>>> --- a/drivers/pci/iov.c
> >>>>>>>>>> +++ b/drivers/pci/iov.c
> >>>>>>>>>> @@ -1013,6 +1013,27 @@ int pci_iov_bus_range(struct pci_bus *bus)
> >>>>>>>>>>  	return max ? max - bus->number : 0;
> >>>>>>>>>>  }
> >>>>>>>>>>  
> >>>>>>>>>> +/**
> >>>>>>>>>> + * pci_reset_iov_state - reset the state of the IOV capability
> >>>>>>>>>> + * @dev: the PCI device
> >>>>>>>>>> + */
> >>>>>>>>>> +void pci_reset_iov_state(struct pci_dev *dev)
> >>>>>>>>>> +{
> >>>>>>>>>> +	struct pci_sriov *iov = dev->sriov;
> >>>>>>>>>> +
> >>>>>>>>>> +	if (!dev->is_physfn)
> >>>>>>>>>> +		return;
> >>>>>>>>>> +	if (!iov->num_VFs)
> >>>>>>>>>> +		return;
> >>>>>>>>>> +
> >>>>>>>>>> +	sriov_del_vfs(dev);
> >>>>>>>>>> +
> >>>>>>>>>> +	if (iov->link != dev->devfn)
> >>>>>>>>>> +		sysfs_remove_link(&dev->dev.kobj, "dep_link");
> >>>>>>>>>> +
> >>>>>>>>>> +	iov->num_VFs = 0;
> >>>>>>>>>> +}
> >>>>>>>>>> +
> >>>
> >>> Any reason for not using pci_disable_sriov()?
> >>
> >> The issue with pci_disable_sriov() is that it calls sriov_disable(),
> >> which directly uses pci_cfg_access_lock(), leading to deadlock on the
> >> FLR path.
> >>
> > 
> > That'll be a problem. Well my main concern is whether the VFs will be reset
> > correctly through pci_reset_iov_state() as it lacks the participant of
> > PF driver and bios (seems may needed only on powerpc, not sure), which is
> > necessary in the enable/disable routine through $pci_dev/sriov_numvfs.
> > 
> >>>
> >>> With the spec the related registers in the SRIOV cap will be reset so
> >>> it's ok in general. But for some devices not following the spec like hns3,
> >>> some fields like VF enable won't be reset and keep enabled after the FLR.
> >>> In this case after the FLR the VF devices in the system has gone but
> >>> the state of the PF SRIOV cap leaves uncleared. pci_disable_sriov()
> >>> will reset the whole SRIOV cap. It'll also call pcibios_sriov_disable()
> >>> to correct handle the VF disabling on some platforms, IIUC.
> >>>
> >>> Or is it better to use pdev->driver->sriov_configure(pdev,0)?
> >>> PF drivers must implement ->sriov_configure() for enabling/disabling
> >>> the VF but we totally skip the PF driver here.
> >>>
> >>> Thanks,
> >>> Yicong
> >>>
> >>>>>>>>>>  /**
> >>>>>>>>>>   * pci_enable_sriov - enable the SR-IOV capability
> >>>>>>>>>>   * @dev: the PCI device
> >>>>>>>>>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> >>>>>>>>>> index 3d2fb394986a..535f19d37e8d 100644
> >>>>>>>>>> --- a/drivers/pci/pci.c
> >>>>>>>>>> +++ b/drivers/pci/pci.c
> >>>>>>>>>> @@ -4694,6 +4694,8 @@ EXPORT_SYMBOL(pci_wait_for_pending_transaction);
> >>>>>>>>>>   */
> >>>>>>>>>>  int pcie_flr(struct pci_dev *dev)
> >>>>>>>>>>  {
> >>>>>>>>>> +	pci_reset_iov_state(dev);
> >>>>>>>>>> +
> >>>>>>>>>>  	if (!pci_wait_for_pending_transaction(dev))
> >>>>>>>>>>  		pci_err(dev, "timed out waiting for pending transaction; performing function level reset anyway\n");
> >>>>>>>>>>  
> >>>>>>>>>> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> >>>>>>>>>> index 3d60cabde1a1..7bb144fbec76 100644
> >>>>>>>>>> --- a/drivers/pci/pci.h
> >>>>>>>>>> +++ b/drivers/pci/pci.h
> >>>>>>>>>> @@ -480,6 +480,7 @@ void pci_iov_update_resource(struct pci_dev *dev, int resno);
> >>>>>>>>>>  resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
> >>>>>>>>>>  void pci_restore_iov_state(struct pci_dev *dev);
> >>>>>>>>>>  int pci_iov_bus_range(struct pci_bus *bus);
> >>>>>>>>>> +void pci_reset_iov_state(struct pci_dev *dev);
> >>>>>>>>>>  extern const struct attribute_group sriov_pf_dev_attr_group;
> >>>>>>>>>>  extern const struct attribute_group sriov_vf_dev_attr_group;
> >>>>>>>>>>  #else
> >>>>>>>>>> @@ -501,6 +502,9 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
> >>>>>>>>>>  {
> >>>>>>>>>>  	return 0;
> >>>>>>>>>>  }
> >>>>>>>>>> +static inline void pci_reset_iov_state(struct pci_dev *dev)
> >>>>>>>>>> +{
> >>>>>>>>>> +}
> >>>>>>>>>>  
> >>>>>>>>>>  #endif /* CONFIG_PCI_IOV */
> >>>> .
> >>>>
> >> .
> >>
> > .
> > 

Re: [PATCH] PCI: Reset IOV state on FLR to PF

[Lukasz Maniak]

On Wed, Jan 19, 2022 at 05:06:55PM +0100, Lukasz Maniak wrote:
> On Wed, Jan 19, 2022 at 06:22:07PM +0800, Yicong Yang wrote:
> > Hi Lukasz, Bjorn,
> > 
> > FYI, I tested with Mellanox CX-5, the VF also exists after FLR. Here's the operation:
> 

Please disregard my previous email. I missed your point.
I take it that the Mellanox CX-5 also violates the spec.

As for using pci_disable_sriov() I did a test to get a backtrace for
deadlock:
[  846.904248] Call Trace:
[  846.904251]  <TASK>
[  846.904272]  __schedule+0x302/0x950
[  846.904282]  schedule+0x58/0xd0
[  846.904286]  pci_wait_cfg+0x63/0xb0
[  846.904290]  ? wait_woken+0x70/0x70
[  846.904296]  pci_cfg_access_lock+0x48/0x50
[  846.904300]  sriov_disable+0x4d/0xf0
[  846.904306]  pci_disable_sriov+0x26/0x30
[  846.904310]  pcie_flr+0x2b/0x100
[  846.904317]  pcie_reset_flr+0x25/0x30
[  846.904322]  __pci_reset_function_locked+0x42/0x60
[  846.904327]  pci_reset_function+0x40/0x70
[  846.904334]  reset_store+0x5c/0xa0
[  846.904347]  dev_attr_store+0x17/0x30
[  846.904357]  sysfs_kf_write+0x3f/0x50
[  846.904365]  kernfs_fop_write_iter+0x13b/0x1d0
[  846.904371]  new_sync_write+0x117/0x1b0
[  846.904379]  vfs_write+0x219/0x2b0
[  846.904384]  ksys_write+0x67/0xe0
[  846.904390]  __x64_sys_write+0x1a/0x20
[  846.904395]  do_syscall_64+0x5c/0xc0
[  846.904401]  ? debug_smp_processor_id+0x17/0x20
[  846.904406]  ? fpregs_assert_state_consistent+0x26/0x50
[  846.904413]  ? exit_to_user_mode_prepare+0x3f/0x1b0
[  846.904418]  ? irqentry_exit_to_user_mode+0x9/0x20
[  846.904423]  ? irqentry_exit+0x33/0x40
[  846.904427]  ? exc_page_fault+0x89/0x180
[  846.904431]  ? asm_exc_page_fault+0x8/0x30
[  846.904438]  entry_SYSCALL_64_after_hwframe+0x44/0xae

As can be noticed during FLR we are already on a locked path for the
device in __pci_reset_function_locked(). In addition, the device will reset
the BARs during FLR on its own.

If we still would like to use pci_disable_sriov() for this purpose we
need to pass a flag to sriov_disable() and use conditionally twice. It
would look something like this:

static void sriov_disable(struct pci_dev *dev, bool flr)
{
	struct pci_sriov *iov = dev->sriov;

	if (!iov->num_VFs)
		return;

	sriov_del_vfs(dev);

	if (!flr) {
		iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
		pci_cfg_access_lock(dev);
		pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
		ssleep(1);
		pci_cfg_access_unlock(dev);
	}

	pcibios_sriov_disable(dev);

	if (iov->link != dev->devfn)
		sysfs_remove_link(&dev->dev.kobj, "dep_link");

	iov->num_VFs = 0;

	if (!flr)
		pci_iov_set_numvfs(dev, 0);
}

Whether this is better, I leave to your evaluation.

Thanks,
Lukasz

> Did you test with or without my patch?
> 
> Here is the result with my patch for the NVMe device in QEMU:
> 
> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -s 01:
> 01:00.0 Non-Volatile memory controller: Red Hat, Inc. Device 0010 (rev 02)
> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>         Capabilities: [120 v1] Single Root I/O Virtualization (SR-IOV)
>                 IOVCap: Migration-, Interrupt Message Number: 000
>                 IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
>                 IOVSta: Migration-
>                 Initial VFs: 8, Total VFs: 8, Number of VFs: 0, Function Dependency Link: 00
>                 VF offset: 1, stride: 1, Device ID: 0010
>                 VF Migration: offset: 00000000, BIR: 0
> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# echo 1 > sriov_numvfs
> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>         Capabilities: [120 v1] Single Root I/O Virtualization (SR-IOV)
>                 IOVCap: Migration-, Interrupt Message Number: 000
>                 IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+
>                 IOVSta: Migration-
>                 Initial VFs: 8, Total VFs: 8, Number of VFs: 1, Function Dependency Link: 00
>                 VF offset: 1, stride: 1, Device ID: 0010
>                 VF Migration: offset: 00000000, BIR: 0
> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# echo 1 > reset
> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>         Capabilities: [120 v1] Single Root I/O Virtualization (SR-IOV)
>                 IOVCap: Migration-, Interrupt Message Number: 000
>                 IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+
>                 IOVSta: Migration-
>                 Initial VFs: 8, Total VFs: 8, Number of VFs: 0, Function Dependency Link: 00
>                 VF offset: 1, stride: 1, Device ID: 0010
>                 VF Migration: offset: 00000000, BIR: 0
> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -xxx -s 01:00.0
> 01:00.0 Non-Volatile memory controller: Red Hat, Inc. Device 0010 (rev 02)
> 00: 36 1b 10 00 07 05 10 00 02 02 08 01 00 00 00 00
> 10: 04 00 80 fe 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f4 1a 00 11
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00
> 40: 11 80 40 80 00 20 00 00 00 30 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 01 00 03 00 08 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 10 60 02 00 00 80 00 10 00 00 00 00 11 04 00 00
> 90: 00 00 11 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 30 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 
> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# cat reset_method
> flr bus
> 
> > 
> > [root@localhost ~]# lspci  -s 01:
> > 01:00.0 Ethernet controller: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
> > 01:00.1 Ethernet controller: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
> > [root@localhost ~]# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
> >         Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
> >                 IOVCap: Migration- 10BitTagReq- Interrupt Message Number: 000
> >                 IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+ 10BitTagReq-
> >                 IOVSta: Migration-
> >                 Initial VFs: 16, Total VFs: 16, Number of VFs: 0, Function Dependency Link: 00
> >                 VF offset: 2, stride: 1, Device ID: 101a
> >                 VF Migration: offset: 00000000, BIR: 0
> > [root@localhost 0000:01:00.0]# echo 1 > sriov_numvfs
> > [root@localhost ~]# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
> >         Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
> >                 IOVCap: Migration- 10BitTagReq- Interrupt Message Number: 000
> >                 IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+ 10BitTagReq-
> >                 IOVSta: Migration-
> >                 Initial VFs: 16, Total VFs: 16, Number of VFs: 1, Function Dependency Link: 00
> >                 VF offset: 2, stride: 1, Device ID: 101a
> >                 VF Migration: offset: 00000000, BIR: 0
> > [root@localhost 0000:01:00.0]# echo 1 > reset
> > [root@localhost ~]# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
> >         Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
> >                 IOVCap: Migration- 10BitTagReq- Interrupt Message Number: 000
> >                 IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+ 10BitTagReq-
> >                 IOVSta: Migration-
> >                 Initial VFs: 16, Total VFs: 16, Number of VFs: 1, Function Dependency Link: 00
> >                 VF offset: 2, stride: 1, Device ID: 101a
> >                 VF Migration: offset: 00000000, BIR: 0
> > [root@localhost ~]# lspci -xxx -s 01:00.0
> > 01:00.0 Ethernet controller: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
> > 00: b3 15 19 10 46 05 10 00 00 00 00 02 08 00 80 00
> > 10: 0c 00 00 00 00 08 00 00 00 00 00 00 00 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 b3 15 08 00
> > 30: 00 00 70 e6 60 00 00 00 00 00 00 00 ff 01 00 00
> > 40: 01 00 c3 81 08 00 00 00 03 9c cc 80 00 78 00 00
> > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 01
> > 60: 10 48 02 00 e2 8f e0 11 5f 29 00 00 04 71 41 00
> > 70: 08 00 04 11 00 00 00 00 00 00 00 00 00 00 00 00
> > 80: 00 00 00 00 17 00 01 00 40 00 00 00 1e 00 80 01
> > 90: 04 00 1e 00 00 00 00 00 00 00 00 00 11 c0 3f 80
> > a0: 00 20 00 00 00 30 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 09 40 18 00 0a 00 00 20 f0 1a 00 00 00 00 00 00
> > d0: 20 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > [root@localhost 0000:01:00.0]# cat reset_method
> > flr bus
> > 
> > On 2022/1/19 10:47, Yicong Yang wrote:
> > > On 2022/1/19 0:30, Lukasz Maniak wrote:
> > >> On Tue, Jan 18, 2022 at 07:07:23PM +0800, Yicong Yang wrote:
> > >>> On 2022/1/18 6:55, Bjorn Helgaas wrote:
> > >>>> [+cc Alex in case he has comments on how FLR should work on
> > >>>> non-conforming hns3 devices]
> > >>>>
> > >>>> On Sat, Jan 15, 2022 at 05:22:19PM +0800, Yicong Yang wrote:
> > >>>>> On 2022/1/15 0:37, Bjorn Helgaas wrote:
> > >>>>>> On Fri, Jan 14, 2022 at 05:42:48PM +0800, Yicong Yang wrote:
> > >>>>>>> On 2022/1/14 0:45, Lukasz Maniak wrote:
> > >>>>>>>> On Wed, Jan 12, 2022 at 08:49:03AM -0600, Bjorn Helgaas wrote:
> > >>>>>>>>> On Wed, Dec 22, 2021 at 08:19:57PM +0100, Lukasz Maniak wrote:
> > >>>>>>>>>> As per PCI Express specification, FLR to a PF resets the PF state as
> > >>>>>>>>>> well as the SR-IOV extended capability including VF Enable which means
> > >>>>>>>>>> that VFs no longer exist.
> > >>>>>>>>>
> > >>>>>>>>> Can you add a specific reference to the spec, please?
> > >>>>>>>>>
> > >>>>>>>> Following the Single Root I/O Virtualization and Sharing Specification:
> > >>>>>>>> 2.2.3. FLR That Targets a PF
> > >>>>>>>> PFs must support FLR.
> > >>>>>>>> FLR to a PF resets the PF state as well as the SR-IOV extended
> > >>>>>>>> capability including VF Enable which means that VFs no longer exist.
> > >>>>>>>>
> > >>>>>>>> For PCI Express Base Specification Revision 5.0 and later, this is
> > >>>>>>>> section 9.2.2.3.
> > >>>>>>
> > >>>>>> This is also the section in the new PCIe r6.0.  Let's use that.
> > >>>>>>
> > >>>>>>>>>> Currently, the IOV state is not updated during FLR, resulting in
> > >>>>>>>>>> non-compliant PCI driver behavior.
> > >>>>>>>>>
> > >>>>>>>>> And include a little detail about what problem is observed?  How would
> > >>>>>>>>> a user know this problem is occurring?
> > >>>>>>>>>
> > >>>>>>>> The problem is that the state of the kernel and HW as to the number of
> > >>>>>>>> VFs gets out of sync after FLR.
> > >>>>>>>>
> > >>>>>>>> This results in further listing, after the FLR is performed by the HW,
> > >>>>>>>> of VFs that actually no longer exist and should no longer be reported on
> > >>>>>>>> the PCI bus. lspci return FFs for these VFs.
> > >>>>>>>
> > >>>>>>> There're some exceptions. Take HiSilicon's hns3 and sec device as an
> > >>>>>>> example, the VF won't be destroyed after the FLR reset.
> > >>>>>>
> > >>>>>> If FLR on an hns3 PF does *not* clear VF Enable, and the VFs still
> > >>>>>> exist after FLR, isn't that a violation of sec 9.2.2.3?
> > >>>>>
> > >>>>> yes I think it's a violation to the spec.
> > >>>>
> > >>>> Thanks for confirming that.
> > >>>>
> > >>>>>> If hns3 and sec don't conform to the spec, we should have some sort of
> > >>>>>> quirk that serves to document and work around this.
> > >>>>>
> > >>>>> ok I think it'll help. Do you mean something like this based on this patch:
> > >>>>>
> > >>>>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> > >>>>> index 69ee321027b4..0e4976c669b2 100644
> > >>>>> --- a/drivers/pci/iov.c
> > >>>>> +++ b/drivers/pci/iov.c
> > >>>>> @@ -1025,6 +1025,8 @@ void pci_reset_iov_state(struct pci_dev *dev)
> > >>>>>  		return;
> > >>>>>  	if (!iov->num_VFs)
> > >>>>>  		return;
> > >>>>> +	if (dev->flr_no_vf_reset)
> > >>>>> +		return;
> > >>>>>
> > >>>>>  	sriov_del_vfs(dev);
> > >>>>>
> > >>>>> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> > >>>>> index 003950c738d2..c8ffcb0ac612 100644
> > >>>>> --- a/drivers/pci/quirks.c
> > >>>>> +++ b/drivers/pci/quirks.c
> > >>>>> @@ -1860,6 +1860,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa256, quirk_huawei_pcie_sva);
> > >>>>>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa258, quirk_huawei_pcie_sva);
> > >>>>>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa259, quirk_huawei_pcie_sva);
> > >>>>>
> > >>>>> +/*
> > >>>>> + * Some HiSilicon PCIe devices' VF won't be destroyed after a FLR reset.
> > >>>>> + * Don't reset these devices' IOV state when doing FLR.
> > >>>>> + */
> > >>>>> +static void quirk_huawei_pcie_flr(struct pci_dev *pdev)
> > >>>>> +{
> > >>>>> +	pdev->flr_no_vf_reset = 1;
> > >>>>> +}
> > >>>>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa255, quirk_huawei_pcie_flr);
> > >>>>> +/* ...some other devices have this quirk */
> > >>>>
> > >>>> Yes, I think something along this line will help.
> > >>>>
> > >>>>> diff --git a/include/linux/pci.h b/include/linux/pci.h
> > >>>>> index 18a75c8e615c..e62f9fa4d48f 100644
> > >>>>> --- a/include/linux/pci.h
> > >>>>> +++ b/include/linux/pci.h
> > >>>>> @@ -454,6 +454,7 @@ struct pci_dev {
> > >>>>>  	unsigned int	is_probed:1;		/* Device probing in progress */
> > >>>>>  	unsigned int	link_active_reporting:1;/* Device capable of reporting link active */
> > >>>>>  	unsigned int	no_vf_scan:1;		/* Don't scan for VFs after IOV enablement */
> > >>>>> +	unsigned int	flr_no_vf_reset:1;	/* VF won't be destroyed after PF's FLR */
> > >>>>>
> > >>>>>>> Currently the transactions with the VF will be restored after the
> > >>>>>>> FLR. But this patch will break that, the VF is fully disabled and
> > >>>>>>> the transaction cannot be restored. User needs to reconfigure it,
> > >>>>>>> which is unnecessary before this patch.
> > >>>>>>
> > >>>>>> What does it mean for a "transaction to be restored"?  Maybe you mean
> > >>>>>> this patch removes the *VFs* via sriov_del_vfs(), and whoever
> > >>>>>> initiated the FLR would need to re-enable VFs via pci_enable_sriov()
> > >>>>>> or something similar?
> > >>>>>
> > >>>>> Partly. It'll also terminate the VF users.
> > >>>>> Think that I attach the VF of hns to a VM by vfio and ping the network
> > >>>>> in the VM, when doing FLR the 'ping' will pause and after FLR it'll
> > >>>>> resume. Currenlty The driver handle this in the ->reset_{prepare, done}()
> > >>>>> methods. The user of VM may not realize there is a FLR of the PF as the
> > >>>>> VF always exists and the 'ping' is never terminated.
> > >>>>>
> > >>>>> If we remove the VF when doing FLR, then 1) we'll block in the VF->remove()
> > >>>>> until no one is using the device, for example the 'ping' is finished.
> > >>>>> 2) the VF in the VM no longer exists and we have to re-enable VF and hotplug
> > >>>>> it into the VM and restart the ping. That's a big difference.
> > >>>>>
> > >>>>>> If FLR disables VFs, it seems like we should expect to have to
> > >>>>>> re-enable them if we want them.
> > >>>>>
> > >>>>> It involves a remove()/probe() process of the VF driver and the user
> > >>>>> of the VF will be terminated, just like the situation illustrated
> > >>>>> above.
> > >>>>
> > >>>> I think users of FLR should be able to rely on it working per spec,
> > >>>> i.e., that VFs will be destroyed.  If hardware like hns3 doesn't do
> > >>>> that, the quirk should work around that in software by doing it
> > >>>> explicitly.
> > >>>>
> > >>>> I don't think the non-standard behavior should be exposed to the
> > >>>> users.  The user should not have to know about this hns3 issue.
> > >>>>
> > >>>> If FLR on a standard NIC terminates a ping on a VF, FLR on an hns3 NIC
> > >>>> should also terminate a ping on a VF.
> > >>>>
> > >>>
> > >>> ok thanks for the discussion, agree on that. According to the spec, after
> > >>> the FLR to the PF the VF does not exist anymore, so the ping will be terminated.
> > >>> Our hns3 and sec team are still evaluating it before coming to a solution of
> > >>> whether using a quirk or comform to the spec.
> > >>>
> > >>> For this patch it looks reasonable to me, but some questions about the code below.
> > >>>
> > >>>>>>> Can we handle this problem in another way? Maybe test the VF's
> > >>>>>>> vendor device ID after the FLR reset to see whether it has really
> > >>>>>>> gone or not?
> > >>>>>>>
> > >>>>>>>> sriov_numvfs in sysfs returns old invalid value and does not allow
> > >>>>>>>> setting a new value before explicitly setting 0 in the first place.
> > >>>>>>>>
> > >>>>>>>>>> This patch introduces a simple function, called on the FLR path, that
> > >>>>>>>>>> removes the virtual function devices from the PCI bus and their
> > >>>>>>>>>> corresponding sysfs links with a final clear of the num_vfs value in IOV
> > >>>>>>>>>> state.
> > >>>>>>>>>>
> > >>>>>>>>>> Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
> > >>>>>>>>>> ---
> > >>>>>>>>>>  drivers/pci/iov.c | 21 +++++++++++++++++++++
> > >>>>>>>>>>  drivers/pci/pci.c |  2 ++
> > >>>>>>>>>>  drivers/pci/pci.h |  4 ++++
> > >>>>>>>>>>  3 files changed, 27 insertions(+)
> > >>>>>>>>>>
> > >>>>>>>>>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> > >>>>>>>>>> index 0267977c9f17..69ee321027b4 100644
> > >>>>>>>>>> --- a/drivers/pci/iov.c
> > >>>>>>>>>> +++ b/drivers/pci/iov.c
> > >>>>>>>>>> @@ -1013,6 +1013,27 @@ int pci_iov_bus_range(struct pci_bus *bus)
> > >>>>>>>>>>  	return max ? max - bus->number : 0;
> > >>>>>>>>>>  }
> > >>>>>>>>>>  
> > >>>>>>>>>> +/**
> > >>>>>>>>>> + * pci_reset_iov_state - reset the state of the IOV capability
> > >>>>>>>>>> + * @dev: the PCI device
> > >>>>>>>>>> + */
> > >>>>>>>>>> +void pci_reset_iov_state(struct pci_dev *dev)
> > >>>>>>>>>> +{
> > >>>>>>>>>> +	struct pci_sriov *iov = dev->sriov;
> > >>>>>>>>>> +
> > >>>>>>>>>> +	if (!dev->is_physfn)
> > >>>>>>>>>> +		return;
> > >>>>>>>>>> +	if (!iov->num_VFs)
> > >>>>>>>>>> +		return;
> > >>>>>>>>>> +
> > >>>>>>>>>> +	sriov_del_vfs(dev);
> > >>>>>>>>>> +
> > >>>>>>>>>> +	if (iov->link != dev->devfn)
> > >>>>>>>>>> +		sysfs_remove_link(&dev->dev.kobj, "dep_link");
> > >>>>>>>>>> +
> > >>>>>>>>>> +	iov->num_VFs = 0;
> > >>>>>>>>>> +}
> > >>>>>>>>>> +
> > >>>
> > >>> Any reason for not using pci_disable_sriov()?
> > >>
> > >> The issue with pci_disable_sriov() is that it calls sriov_disable(),
> > >> which directly uses pci_cfg_access_lock(), leading to deadlock on the
> > >> FLR path.
> > >>
> > > 
> > > That'll be a problem. Well my main concern is whether the VFs will be reset
> > > correctly through pci_reset_iov_state() as it lacks the participant of
> > > PF driver and bios (seems may needed only on powerpc, not sure), which is
> > > necessary in the enable/disable routine through $pci_dev/sriov_numvfs.
> > > 
> > >>>
> > >>> With the spec the related registers in the SRIOV cap will be reset so
> > >>> it's ok in general. But for some devices not following the spec like hns3,
> > >>> some fields like VF enable won't be reset and keep enabled after the FLR.
> > >>> In this case after the FLR the VF devices in the system has gone but
> > >>> the state of the PF SRIOV cap leaves uncleared. pci_disable_sriov()
> > >>> will reset the whole SRIOV cap. It'll also call pcibios_sriov_disable()
> > >>> to correct handle the VF disabling on some platforms, IIUC.
> > >>>
> > >>> Or is it better to use pdev->driver->sriov_configure(pdev,0)?
> > >>> PF drivers must implement ->sriov_configure() for enabling/disabling
> > >>> the VF but we totally skip the PF driver here.
> > >>>
> > >>> Thanks,
> > >>> Yicong
> > >>>
> > >>>>>>>>>>  /**
> > >>>>>>>>>>   * pci_enable_sriov - enable the SR-IOV capability
> > >>>>>>>>>>   * @dev: the PCI device
> > >>>>>>>>>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > >>>>>>>>>> index 3d2fb394986a..535f19d37e8d 100644
> > >>>>>>>>>> --- a/drivers/pci/pci.c
> > >>>>>>>>>> +++ b/drivers/pci/pci.c
> > >>>>>>>>>> @@ -4694,6 +4694,8 @@ EXPORT_SYMBOL(pci_wait_for_pending_transaction);
> > >>>>>>>>>>   */
> > >>>>>>>>>>  int pcie_flr(struct pci_dev *dev)
> > >>>>>>>>>>  {
> > >>>>>>>>>> +	pci_reset_iov_state(dev);
> > >>>>>>>>>> +
> > >>>>>>>>>>  	if (!pci_wait_for_pending_transaction(dev))
> > >>>>>>>>>>  		pci_err(dev, "timed out waiting for pending transaction; performing function level reset anyway\n");
> > >>>>>>>>>>  
> > >>>>>>>>>> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> > >>>>>>>>>> index 3d60cabde1a1..7bb144fbec76 100644
> > >>>>>>>>>> --- a/drivers/pci/pci.h
> > >>>>>>>>>> +++ b/drivers/pci/pci.h
> > >>>>>>>>>> @@ -480,6 +480,7 @@ void pci_iov_update_resource(struct pci_dev *dev, int resno);
> > >>>>>>>>>>  resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
> > >>>>>>>>>>  void pci_restore_iov_state(struct pci_dev *dev);
> > >>>>>>>>>>  int pci_iov_bus_range(struct pci_bus *bus);
> > >>>>>>>>>> +void pci_reset_iov_state(struct pci_dev *dev);
> > >>>>>>>>>>  extern const struct attribute_group sriov_pf_dev_attr_group;
> > >>>>>>>>>>  extern const struct attribute_group sriov_vf_dev_attr_group;
> > >>>>>>>>>>  #else
> > >>>>>>>>>> @@ -501,6 +502,9 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
> > >>>>>>>>>>  {
> > >>>>>>>>>>  	return 0;
> > >>>>>>>>>>  }
> > >>>>>>>>>> +static inline void pci_reset_iov_state(struct pci_dev *dev)
> > >>>>>>>>>> +{
> > >>>>>>>>>> +}
> > >>>>>>>>>>  
> > >>>>>>>>>>  #endif /* CONFIG_PCI_IOV */
> > >>>> .
> > >>>>
> > >> .
> > >>
> > > .
> > > 

Re: [PATCH] PCI: Reset IOV state on FLR to PF

[Yicong Yang]

On 2022/1/20 1:09, Lukasz Maniak wrote:
> On Wed, Jan 19, 2022 at 05:06:55PM +0100, Lukasz Maniak wrote:
>> On Wed, Jan 19, 2022 at 06:22:07PM +0800, Yicong Yang wrote:
>>> Hi Lukasz, Bjorn,
>>>
>>> FYI, I tested with Mellanox CX-5, the VF also exists after FLR. Here's the operation:
>>
> 
> Please disregard my previous email. I missed your point.
> I take it that the Mellanox CX-5 also violates the spec.
> 
> As for using pci_disable_sriov() I did a test to get a backtrace for
> deadlock:
> [  846.904248] Call Trace:
> [  846.904251]  <TASK>
> [  846.904272]  __schedule+0x302/0x950
> [  846.904282]  schedule+0x58/0xd0
> [  846.904286]  pci_wait_cfg+0x63/0xb0
> [  846.904290]  ? wait_woken+0x70/0x70
> [  846.904296]  pci_cfg_access_lock+0x48/0x50
> [  846.904300]  sriov_disable+0x4d/0xf0
> [  846.904306]  pci_disable_sriov+0x26/0x30
> [  846.904310]  pcie_flr+0x2b/0x100
> [  846.904317]  pcie_reset_flr+0x25/0x30
> [  846.904322]  __pci_reset_function_locked+0x42/0x60
> [  846.904327]  pci_reset_function+0x40/0x70
> [  846.904334]  reset_store+0x5c/0xa0
> [  846.904347]  dev_attr_store+0x17/0x30
> [  846.904357]  sysfs_kf_write+0x3f/0x50
> [  846.904365]  kernfs_fop_write_iter+0x13b/0x1d0
> [  846.904371]  new_sync_write+0x117/0x1b0
> [  846.904379]  vfs_write+0x219/0x2b0
> [  846.904384]  ksys_write+0x67/0xe0
> [  846.904390]  __x64_sys_write+0x1a/0x20
> [  846.904395]  do_syscall_64+0x5c/0xc0
> [  846.904401]  ? debug_smp_processor_id+0x17/0x20
> [  846.904406]  ? fpregs_assert_state_consistent+0x26/0x50
> [  846.904413]  ? exit_to_user_mode_prepare+0x3f/0x1b0
> [  846.904418]  ? irqentry_exit_to_user_mode+0x9/0x20
> [  846.904423]  ? irqentry_exit+0x33/0x40
> [  846.904427]  ? exc_page_fault+0x89/0x180
> [  846.904431]  ? asm_exc_page_fault+0x8/0x30
> [  846.904438]  entry_SYSCALL_64_after_hwframe+0x44/0xae
> 
> As can be noticed during FLR we are already on a locked path for the
> device in __pci_reset_function_locked(). In addition, the device will reset
> the BARs during FLR on its own.
> 
> If we still would like to use pci_disable_sriov() for this purpose we
> need to pass a flag to sriov_disable() and use conditionally twice. It
> would look something like this:
> 
> static void sriov_disable(struct pci_dev *dev, bool flr)
> {
> 	struct pci_sriov *iov = dev->sriov;
> 
> 	if (!iov->num_VFs)
> 		return;
> 
> 	sriov_del_vfs(dev);
> 
> 	if (!flr) {
> 		iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
> 		pci_cfg_access_lock(dev);
> 		pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
> 		ssleep(1);
> 		pci_cfg_access_unlock(dev);
> 	}
> 

It still leaves the VFE uncleared. So after reset the hardware IOV state is unsynchronized
with the system as we've removed the VFs already. so you may need:

static void sriov_disable(struct pci_dev *dev, bool locked)
{
	struct pci_sriov *iov = dev->sriov;

	if (!iov->num_VFs)
		return;

	sriov_del_vfs(dev);

	iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
	if (!locked)
		pci_cfg_access_lock(dev);
	pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
	ssleep(1);
	if (!locked)
		pci_cfg_access_unlock(dev);

	pcibios_sriov_disable(dev);

	if (iov->link != dev->devfn)
		sysfs_remove_link(&dev->dev.kobj, "dep_link");

	iov->num_VFs = 0;

	if (!flr)
		pci_iov_set_numvfs(dev, 0);
}

I'm not sure this is correct as we disable VF not through PF driver
and whether these PF driver involed need to modified after this
change.
(Yes through pdev->driver->sriov_configure() we'll also meet the
deadlock problem but that's the next step question).

With your patch based on 5.16 release when doing FLR reset on VF's PF
of Mellanox CX-5, the log says that there's a resource leakage and
leads to several calltraces. I paste the log below.

Perhaps Mellanox maintainers could help on this.

Thanks.

[  435.211235] mlx5_core 0000:01:00.0: E-Switch: Enable: mode(LEGACY), nvfs(1), active vports(2)
[  435.327158] pci 0000:01:00.2: [15b3:101a] type 00 class 0x020000
[  435.333197] pci 0000:01:00.2: enabling Extended Tags
[  435.338936] pci 0000:01:00.2: calling  mellanox_check_broken_intx_masking+0x0/0x1a0 @ 4328
[  435.347174] pci 0000:01:00.2: mellanox_check_broken_intx_masking+0x0/0x1a0 took 0 usecs
[  435.355224] mlx5_core 0000:01:00.2: Adding to iommu group 49
[  435.361639] mlx5_core 0000:01:00.2: enabling device (0000 -> 0002)
[  435.367917] mlx5_core 0000:01:00.2: firmware version: 16.27.1016
[  435.611252] mlx5_core 0000:01:00.2: Rate limit: 127 rates are supported, range: 0Mbps to 97656Mbps
[  435.628931] mlx5_core 0000:01:00.2: Assigned random MAC address 72:51:df:ba:6a:1e
[  435.636824] mlx5_core 0000:01:00.2: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
[  435.744665] mlx5_core 0000:01:00.2: Supported tc offload range - chains: 1, prios: 1
[  446.080370] mlx5_core 0000:01:00.2: mlx5_cmd_check:782:(pid 4328): 2RST_QP(0x50a) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x7ea02d)
[  446.094054] infiniband mlx5_2: destroy_qp_common:2599:(pid 4328): mlx5_ib: modify QP 0x000504 to RESET failed
[  446.104036] mlx5_core 0000:01:00.2: mlx5_cmd_check:782:(pid 4328): DESTROY_QP(0x501) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x25b161)
[  446.118092] mlx5_core 0000:01:00.2: mlx5_cmd_check:782:(pid 4328): DESTROY_CQ(0x401) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x1870ad)
[  446.132028] ------------[ cut here ]------------
[  446.136629] Destroy of kernel CQ shouldn't fail
[  446.136648] WARNING: CPU: 37 PID: 4328 at drivers/infiniband/core/cq.c:345 ib_free_cq+0x16c/0x174
[  446.149991] Modules linked in: bluetooth rfkill xt_addrtype iptable_filter xt_conntrack overlay dm_mod ib_isert iscsi_target_mod rpcrdma ib_umad ib_iser ib_ipoib libiscsi scsi_transport_iscsi mlx5_ib hns_roce_hw_v2 hisi_hpre hisi_sec2 sbsa_gwdt hisi_zip hisi_trng_v2 arm_spe_pmu hisi_qm hisi_uncore_l3c_pmu hisi_uncore_hha_pmu uacce hisi_uncore_ddrc_pmu crct10dif_ce rng_core spi_dw_mmio hisi_uncore_pmu hns3 hclge hisi_sas_v3_hw hnae3 hisi_sas_main libsas
[  446.189868] CPU: 37 PID: 4328 Comm: bash Kdump: loaded Not tainted 5.16.0-pcie-iov+ #14
[  446.197833] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V5.B221.01 12/09/2021
[  446.206661] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  446.213591] pc : ib_free_cq+0x16c/0x174
[  446.217410] lr : ib_free_cq+0x16c/0x174
[  446.221229] sp : ffff80006172b5f0
[  446.224527] x29: ffff80006172b5f0 x28: ffff008009880000 x27: 0000000000000000
[  446.231632] x26: ffff00800e8c00d0 x25: 0000000000000000 x24: 0000000000000000
[  446.238734] x23: ffff0041495b0000 x22: 0000000000000000 x21: ffff00413f3c0800
[  446.245837] x20: ffff00413f3c0928 x19: ffff00408d4bf800 x18: 0000000000000030
[  446.252939] x17: 0000000000000001 x16: ffffd9e776fbe8a0 x15: ffff0080098805d0
[  446.260043] x14: 0000000000000000 x13: 6c6961662074276e x12: 646c756f68732051
[  446.267145] x11: 43206c656e72656b x10: ffff205f2b8c5a28 x9 : ffffd9e776239854
[  446.274247] x8 : ffff205f2b5e0000 x7 : ffff205f2b8a0000 x6 : 0000000000025a28
[  446.281350] x5 : ffff00af3faf39b0 x4 : 0000000000000000 x3 : 0000000000000027
[  446.288452] x2 : 0000000000000023 x1 : 16e32808cb35d300 x0 : 0000000000000000
[  446.295554] Call trace:
[  446.297989]  ib_free_cq+0x16c/0x174
[  446.301463]  mlx5_ib_destroy_gsi+0xac/0x110 [mlx5_ib]
[  446.306507]  mlx5_ib_destroy_qp+0x64/0x70 [mlx5_ib]
[  446.311372]  ib_destroy_qp_user+0x7c/0x19c
[  446.315450]  ib_mad_port_close+0xac/0x164
[  446.319444]  ib_mad_remove_device+0x88/0xdc
[  446.323608]  remove_client_context+0xa4/0x100
[  446.327946]  disable_device+0x98/0x170
[  446.331680]  __ib_unregister_device+0x54/0xf0
[  446.336017]  ib_unregister_device+0x34/0x50
[  446.340182]  mlx5_ib_stage_ib_reg_cleanup+0x1c/0x2c [mlx5_ib]
[  446.345909]  mlx5r_remove+0x54/0x80 [mlx5_ib]
[  446.350254]  auxiliary_bus_remove+0x30/0x4c
[  446.354421]  __device_release_driver+0x190/0x23c
[  446.359017]  device_release_driver+0x38/0x50
[  446.363268]  bus_remove_device+0x130/0x140
[  446.367345]  device_del+0x184/0x434
[  446.370819]  delete_drivers+0x54/0xe0
[  446.374466]  mlx5_unregister_device+0x40/0x80
[  446.378803]  mlx5_uninit_one+0x34/0xd4
[  446.382536]  remove_one+0x4c/0xd0
[  446.385838]  pci_device_remove+0x48/0xe0
[  446.389744]  __device_release_driver+0x190/0x23c
[  446.394340]  device_release_driver+0x38/0x50
[  446.398592]  pci_stop_bus_device+0x8c/0xd0
[  446.402670]  pci_stop_and_remove_bus_device+0x24/0x40
[  446.407699]  pci_iov_remove_virtfn+0xb8/0x130
[  446.412038]  pci_reset_iov_state+0x5c/0xb0
[  446.416114]  pcie_flr+0x38/0x130
[  446.419329]  pcie_reset_flr+0x40/0x54
[  446.422976]  __pci_reset_function_locked+0x54/0x80
[  446.427745]  pci_reset_function+0x4c/0x90
[  446.431738]  reset_store+0x70/0xc0
[  446.435125]  dev_attr_store+0x24/0x40
[  446.438772]  sysfs_kf_write+0x50/0x60
[  446.442421]  kernfs_fop_write_iter+0x124/0x1b4
[  446.446845]  new_sync_write+0xf0/0x190
[  446.450578]  vfs_write+0x25c/0x2c0
[  446.453964]  ksys_write+0x78/0x104
[  446.457350]  __arm64_sys_write+0x28/0x3c
[  446.461254]  invoke_syscall+0x50/0x120
[  446.464988]  el0_svc_common.constprop.0+0x188/0x190
[  446.469843]  do_el0_svc+0x30/0x90
[  446.473145]  el0_svc+0x20/0x90
[  446.476186]  el0t_64_sync_handler+0x1a8/0x1ac
[  446.480524]  el0t_64_sync+0x1a0/0x1a4
[  446.484171] ---[ end trace d334416dff5120e3 ]---
[  446.488831] mlx5_core 0000:01:00.2: mlx5_cmd_check:782:(pid 4328): DESTROY_CQ(0x401) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x1870ad)
[  446.503029] mlx5_core 0000:01:00.2: mlx5_cmd_check:782:(pid 4328): DEALLOC_PD(0x801) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x31b635)
[  446.516961] ------------[ cut here ]------------
[  446.521560] Destroy of kernel PD shouldn't fail
[  446.521570] WARNING: CPU: 37 PID: 4328 at include/rdma/ib_verbs.h:3498 ib_mad_port_close+0x138/0x164
[  446.535170] Modules linked in: bluetooth rfkill xt_addrtype iptable_filter xt_conntrack overlay dm_mod ib_isert iscsi_target_mod rpcrdma ib_umad ib_iser ib_ipoib libiscsi scsi_transport_iscsi mlx5_ib hns_roce_hw_v2 hisi_hpre hisi_sec2 sbsa_gwdt hisi_zip hisi_trng_v2 arm_spe_pmu hisi_qm hisi_uncore_l3c_pmu hisi_uncore_hha_pmu uacce hisi_uncore_ddrc_pmu crct10dif_ce rng_core spi_dw_mmio hisi_uncore_pmu hns3 hclge hisi_sas_v3_hw hnae3 hisi_sas_main libsas
[  446.575038] CPU: 37 PID: 4328 Comm: bash Kdump: loaded Tainted: G        W         5.16.0-pcie-iov+ #14
[  446.584386] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V5.B221.01 12/09/2021
[  446.593214] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  446.600144] pc : ib_mad_port_close+0x138/0x164
[  446.604567] lr : ib_mad_port_close+0x138/0x164
[  446.608990] sp : ffff80006172b6b0
[  446.612290] x29: ffff80006172b6b0 x28: ffff008009880000 x27: 0000000000000000
[  446.619393] x26: ffff00800e8c00d0 x25: 0000000000000000 x24: 0000000000000000
[  446.626495] x23: ffff0041495b04a8 x22: ffffd9e7794f8920 x21: ffff0040ed5978f8
[  446.633598] x20: ffff0040ed597870 x19: ffff0040ed597000 x18: 0000000000000030
[  446.640700] x17: 0000000000000001 x16: ffffd9e776fb5f04 x15: ffff0080098805d0
[  446.647801] x14: 0000000000000000 x13: 6c6961662074276e x12: 646c756f68732044
[  446.654903] x11: 50206c656e72656b x10: ffff205f2b8c60b8 x9 : ffffd9e776239854
[  446.662006] x8 : ffff205f2b5e0000 x7 : ffff205f2b8a0000 x6 : 00000000000260b8
[  446.669110] x5 : ffff00af3faf39b0 x4 : 0000000000000000 x3 : 0000000000000027
[  446.676212] x2 : 0000000000000023 x1 : 16e32808cb35d300 x0 : 0000000000000000
[  446.683314] Call trace:
[  446.685750]  ib_mad_port_close+0x138/0x164
[  446.689828]  ib_mad_remove_device+0x88/0xdc
[  446.693994]  remove_client_context+0xa4/0x100
[  446.698330]  disable_device+0x98/0x170
[  446.702062]  __ib_unregister_device+0x54/0xf0
[  446.706400]  ib_unregister_device+0x34/0x50
[  446.710565]  mlx5_ib_stage_ib_reg_cleanup+0x1c/0x2c [mlx5_ib]
[  446.716293]  mlx5r_remove+0x54/0x80 [mlx5_ib]
[  446.720639]  auxiliary_bus_remove+0x30/0x4c
[  446.724804]  __device_release_driver+0x190/0x23c
[  446.729402]  device_release_driver+0x38/0x50
[  446.733652]  bus_remove_device+0x130/0x140
[  446.737731]  device_del+0x184/0x434
[  446.741204]  delete_drivers+0x54/0xe0
[  446.744850]  mlx5_unregister_device+0x40/0x80
[  446.749186]  mlx5_uninit_one+0x34/0xd4
[  446.752918]  remove_one+0x4c/0xd0
[  446.756219]  pci_device_remove+0x48/0xe0
[  446.760125]  __device_release_driver+0x190/0x23c
[  446.764720]  device_release_driver+0x38/0x50
[  446.768971]  pci_stop_bus_device+0x8c/0xd0
[  446.773048]  pci_stop_and_remove_bus_device+0x24/0x40
[  446.778075]  pci_iov_remove_virtfn+0xb8/0x130
[  446.782413]  pci_reset_iov_state+0x5c/0xb0
[  446.786490]  pcie_flr+0x38/0x130
[  446.789703]  pcie_reset_flr+0x40/0x54
[  446.793349]  __pci_reset_function_locked+0x54/0x80
[  446.798118]  pci_reset_function+0x4c/0x90
[  446.802110]  reset_store+0x70/0xc0
[  446.805498]  dev_attr_store+0x24/0x40
[  446.809144]  sysfs_kf_write+0x50/0x60
[  446.812791]  kernfs_fop_write_iter+0x124/0x1b4
[  446.817216]  new_sync_write+0xf0/0x190
[  446.820947]  vfs_write+0x25c/0x2c0
[  446.824335]  ksys_write+0x78/0x104
[  446.827723]  __arm64_sys_write+0x28/0x3c
[  446.831628]  invoke_syscall+0x50/0x120
[  446.835359]  el0_svc_common.constprop.0+0x188/0x190
[  446.840215]  do_el0_svc+0x30/0x90
[  446.843516]  el0_svc+0x20/0x90
[  446.846558]  el0t_64_sync_handler+0x1a8/0x1ac
[  446.850894]  el0t_64_sync+0x1a0/0x1a4
[  446.854539] ---[ end trace d334416dff5120e4 ]---
[  446.903110] mlx5_core 0000:01:00.2: mlx5_cmd_check:782:(pid 4328): DESTROY_UCTX(0xa06) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x15555)
[  446.917110] mlx5_core 0000:01:00.2: mlx5_cmd_check:782:(pid 4328): 2RST_QP(0x50a) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x7ea02d)
[  446.930787] infiniband mlx5_2: destroy_qp_common:2599:(pid 4328): mlx5_ib: modify QP 0x000505 to RESET failed
[  446.940726] mlx5_core 0000:01:00.2: mlx5_cmd_check:782:(pid 4328): DESTROY_QP(0x501) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x25b161)
[  446.954736] mlx5_core 0000:01:00.2: mlx5_cmd_check:782:(pid 4328): DESTROY_CQ(0x401) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x1870ad)
[  446.968832] mlx5_core 0000:01:00.2: mlx5_cmd_check:782:(pid 4328): DEALLOC_PD(0x801) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x31b635)
[  446.982795] ------------[ cut here ]------------
[  446.987400] Destroy of kernel PD shouldn't fail
[  446.987417] WARNING: CPU: 37 PID: 4328 at include/rdma/ib_verbs.h:3498 mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x8c/0xc0 [mlx5_ib]
[  447.003359] Modules linked in: bluetooth rfkill xt_addrtype iptable_filter xt_conntrack overlay dm_mod ib_isert iscsi_target_mod rpcrdma ib_umad ib_iser ib_ipoib libiscsi scsi_transport_iscsi mlx5_ib hns_roce_hw_v2 hisi_hpre hisi_sec2 sbsa_gwdt hisi_zip hisi_trng_v2 arm_spe_pmu hisi_qm hisi_uncore_l3c_pmu hisi_uncore_hha_pmu uacce hisi_uncore_ddrc_pmu crct10dif_ce rng_core spi_dw_mmio hisi_uncore_pmu hns3 hclge hisi_sas_v3_hw hnae3 hisi_sas_main libsas
[  447.043229] CPU: 37 PID: 4328 Comm: bash Kdump: loaded Tainted: G        W         5.16.0-pcie-iov+ #14
[  447.052577] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V5.B221.01 12/09/2021
[  447.061406] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  447.068336] pc : mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x8c/0xc0 [mlx5_ib]
[  447.075102] lr : mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x8c/0xc0 [mlx5_ib]
[  447.081866] sp : ffff80006172b7e0
[  447.085165] x29: ffff80006172b7e0 x28: ffff008009880000 x27: 0000000000000000
[  447.092269] x26: ffff00800e8c00d0 x25: 0000000000000000 x24: ffff008009880000
[  447.099372] x23: 0000000000000080 x22: ffffd9e70116cfd0 x21: ffffd9e701163d28
[  447.106474] x20: ffff0041495b0000 x19: ffff0041495b0000 x18: 0000000000000030
[  447.113576] x17: 0000000000000001 x16: ffffd9e77771be14 x15: ffff0080098805d0
[  447.120679] x14: 0000000000000000 x13: 6c6961662074276e x12: 646c756f68732044
[  447.127781] x11: 50206c656e72656b x10: ffff205f2b8c6748 x9 : ffffd9e776239854
[  447.134884] x8 : ffff205f2b5e0000 x7 : ffff205f2b8a0000 x6 : 0000000000026748
[  447.141986] x5 : ffff00af3faf39b0 x4 : 0000000000000000 x3 : 0000000000000027
[  447.149090] x2 : 0000000000000023 x1 : 16e32808cb35d300 x0 : 0000000000000000
[  447.156192] Call trace:
[  447.158627]  mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x8c/0xc0 [mlx5_ib]
[  447.165046]  mlx5r_remove+0x54/0x80 [mlx5_ib]
[  447.169390]  auxiliary_bus_remove+0x30/0x4c
[  447.173556]  __device_release_driver+0x190/0x23c
[  447.178152]  device_release_driver+0x38/0x50
[  447.182402]  bus_remove_device+0x130/0x140
[  447.186480]  device_del+0x184/0x434
[  447.189954]  delete_drivers+0x54/0xe0
[  447.193600]  mlx5_unregister_device+0x40/0x80
[  447.197938]  mlx5_uninit_one+0x34/0xd4
[  447.201671]  remove_one+0x4c/0xd0
[  447.204972]  pci_device_remove+0x48/0xe0
[  447.208876]  __device_release_driver+0x190/0x23c
[  447.213472]  device_release_driver+0x38/0x50
[  447.217723]  pci_stop_bus_device+0x8c/0xd0
[  447.221801]  pci_stop_and_remove_bus_device+0x24/0x40
[  447.226830]  pci_iov_remove_virtfn+0xb8/0x130
[  447.231168]  pci_reset_iov_state+0x5c/0xb0
[  447.235247]  pcie_flr+0x38/0x130
[  447.238460]  pcie_reset_flr+0x40/0x54
[  447.242106]  __pci_reset_function_locked+0x54/0x80
[  447.246874]  pci_reset_function+0x4c/0x90
[  447.250866]  reset_store+0x70/0xc0
[  447.254252]  dev_attr_store+0x24/0x40
[  447.257898]  sysfs_kf_write+0x50/0x60
[  447.261545]  kernfs_fop_write_iter+0x124/0x1b4
[  447.265969]  new_sync_write+0xf0/0x190
[  447.269702]  vfs_write+0x25c/0x2c0
[  447.273089]  ksys_write+0x78/0x104
[  447.276477]  __arm64_sys_write+0x28/0x3c
[  447.280382]  invoke_syscall+0x50/0x120
[  447.284115]  el0_svc_common.constprop.0+0x188/0x190
[  447.288970]  do_el0_svc+0x30/0x90
[  447.292269]  el0_svc+0x20/0x90
[  447.295310]  el0t_64_sync_handler+0x1a8/0x1ac
[  447.299648]  el0t_64_sync+0x1a0/0x1a4
[  447.303294] ---[ end trace d334416dff5120e5 ]---
[  447.307952] mlx5_core 0000:01:00.2: up_rel_func:90:(pid 4328): failed to free uar index 17
[  447.351101] ------------[ cut here ]------------
[  447.355699] Destroy of kernel SRQ shouldn't fail
[  447.355712] WARNING: CPU: 37 PID: 4328 at include/rdma/ib_verbs.h:3688 mlx5_ib_dev_res_cleanup+0xc4/0x150 [mlx5_ib]
[  447.370701] Modules linked in: bluetooth rfkill xt_addrtype iptable_filter xt_conntrack overlay dm_mod ib_isert iscsi_target_mod rpcrdma ib_umad ib_iser ib_ipoib libiscsi scsi_transport_iscsi mlx5_ib hns_roce_hw_v2 hisi_hpre hisi_sec2 sbsa_gwdt hisi_zip hisi_trng_v2 arm_spe_pmu hisi_qm hisi_uncore_l3c_pmu hisi_uncore_hha_pmu uacce hisi_uncore_ddrc_pmu crct10dif_ce rng_core spi_dw_mmio hisi_uncore_pmu hns3 hclge hisi_sas_v3_hw hnae3 hisi_sas_main libsas
[  447.410571] CPU: 37 PID: 4328 Comm: bash Kdump: loaded Tainted: G        W         5.16.0-pcie-iov+ #14
[  447.419919] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V5.B221.01 12/09/2021
[  447.428749] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  447.435678] pc : mlx5_ib_dev_res_cleanup+0xc4/0x150 [mlx5_ib]
[  447.441406] lr : mlx5_ib_dev_res_cleanup+0xc4/0x150 [mlx5_ib]
[  447.447132] sp : ffff80006172b7e0
[  447.450431] x29: ffff80006172b7e0 x28: ffff008009880000 x27: 0000000000000000
[  447.457533] x26: ffff00800e8c00d0 x25: 0000000000000000 x24: ffff008009880000
[  447.464635] x23: 0000000000000080 x22: ffffd9e70116cfd0 x21: ffffd9e701163d28
[  447.471737] x20: ffff0041495b0b70 x19: ffff0041495b0000 x18: 0000000000000030
[  447.478838] x17: 657266206f742064 x16: ffffd9e77771be14 x15: ffff0080098805d0
[  447.485942] x14: 0000000000000000 x13: 6c6961662074276e x12: 646c756f68732051
[  447.493045] x11: 5253206c656e7265 x10: ffff205f2b8c6cd0 x9 : ffffd9e776239854
[  447.500147] x8 : ffff205f2b5e0000 x7 : ffff205f2b8a0000 x6 : 0000000000026cd0
[  447.507250] x5 : ffff00af3faf39b0 x4 : 0000000000000000 x3 : 0000000000000027
[  447.514351] x2 : 0000000000000023 x1 : 16e32808cb35d300 x0 : 0000000000000000
[  447.521453] Call trace:
[  447.523888]  mlx5_ib_dev_res_cleanup+0xc4/0x150 [mlx5_ib]
[  447.529270]  mlx5r_remove+0x54/0x80 [mlx5_ib]
[  447.533613]  auxiliary_bus_remove+0x30/0x4c
[  447.537778]  __device_release_driver+0x190/0x23c
[  447.542375]  device_release_driver+0x38/0x50
[  447.546627]  bus_remove_device+0x130/0x140
[  447.550703]  device_del+0x184/0x434
[  447.554175]  delete_drivers+0x54/0xe0
[  447.557822]  mlx5_unregister_device+0x40/0x80
[  447.562159]  mlx5_uninit_one+0x34/0xd4
[  447.565892]  remove_one+0x4c/0xd0
[  447.569192]  pci_device_remove+0x48/0xe0
[  447.573098]  __device_release_driver+0x190/0x23c
[  447.577694]  device_release_driver+0x38/0x50
[  447.581944]  pci_stop_bus_device+0x8c/0xd0
[  447.586022]  pci_stop_and_remove_bus_device+0x24/0x40
[  447.591049]  pci_iov_remove_virtfn+0xb8/0x130
[  447.595386]  pci_reset_iov_state+0x5c/0xb0
[  447.599464]  pcie_flr+0x38/0x130
[  447.602678]  pcie_reset_flr+0x40/0x54
[  447.606323]  __pci_reset_function_locked+0x54/0x80
[  447.611092]  pci_reset_function+0x4c/0x90
[  447.615085]  reset_store+0x70/0xc0
[  447.618473]  dev_attr_store+0x24/0x40
[  447.622120]  sysfs_kf_write+0x50/0x60
[  447.625766]  kernfs_fop_write_iter+0x124/0x1b4
[  447.630189]  new_sync_write+0xf0/0x190
[  447.633921]  vfs_write+0x25c/0x2c0
[  447.637308]  ksys_write+0x78/0x104
[  447.640696]  __arm64_sys_write+0x28/0x3c
[  447.644601]  invoke_syscall+0x50/0x120
[  447.648334]  el0_svc_common.constprop.0+0x188/0x190
[  447.653190]  do_el0_svc+0x30/0x90
[  447.656490]  el0_svc+0x20/0x90
[  447.659531]  el0t_64_sync_handler+0x1a8/0x1ac
[  447.663867]  el0t_64_sync+0x1a0/0x1a4
[  447.667512] ---[ end trace d334416dff5120e6 ]---
[  447.672291] ------------[ cut here ]------------
[  447.676892] Destroy of kernel CQ shouldn't fail
[  447.676904] WARNING: CPU: 37 PID: 4328 at include/rdma/ib_verbs.h:3936 mlx5_ib_dev_res_cleanup+0x118/0x150 [mlx5_ib]
[  447.691895] Modules linked in: bluetooth rfkill xt_addrtype iptable_filter xt_conntrack overlay dm_mod ib_isert iscsi_target_mod rpcrdma ib_umad ib_iser ib_ipoib libiscsi scsi_transport_iscsi mlx5_ib hns_roce_hw_v2 hisi_hpre hisi_sec2 sbsa_gwdt hisi_zip hisi_trng_v2 arm_spe_pmu hisi_qm hisi_uncore_l3c_pmu hisi_uncore_hha_pmu uacce hisi_uncore_ddrc_pmu crct10dif_ce rng_core spi_dw_mmio hisi_uncore_pmu hns3 hclge hisi_sas_v3_hw hnae3 hisi_sas_main libsas
[  447.731764] CPU: 37 PID: 4328 Comm: bash Kdump: loaded Tainted: G        W         5.16.0-pcie-iov+ #14
[  447.741112] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V5.B221.01 12/09/2021
[  447.749942] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  447.756872] pc : mlx5_ib_dev_res_cleanup+0x118/0x150 [mlx5_ib]
[  447.762685] lr : mlx5_ib_dev_res_cleanup+0x118/0x150 [mlx5_ib]
[  447.768497] sp : ffff80006172b7e0
[  447.771795] x29: ffff80006172b7e0 x28: ffff008009880000 x27: 0000000000000000
[  447.778897] x26: ffff00800e8c00d0 x25: 0000000000000000 x24: ffff008009880000
[  447.786000] x23: 0000000000000080 x22: ffffd9e70116cfd0 x21: ffffd9e701163d28
[  447.793103] x20: ffff0041495b0b70 x19: ffff0041495b0000 x18: 0000000000000030
[  447.800207] x17: 657266206f742064 x16: ffffd9e77771be14 x15: ffff0080098805d0
[  447.807309] x14: 0000000000000000 x13: 6c6961662074276e x12: 646c756f68732051
[  447.814410] x11: 43206c656e72656b x10: ffff205f2b8c7240 x9 : ffffd9e776239854
[  447.821514] x8 : ffff205f2b5e0000 x7 : ffff205f2b8a0000 x6 : 0000000000027240
[  447.828615] x5 : ffff00af3faf39b0 x4 : 0000000000000000 x3 : 0000000000000027
[  447.835717] x2 : 0000000000000023 x1 : 16e32808cb35d300 x0 : 0000000000000000
[  447.842818] Call trace:
[  447.845252]  mlx5_ib_dev_res_cleanup+0x118/0x150 [mlx5_ib]
[  447.850719]  mlx5r_remove+0x54/0x80 [mlx5_ib]
[  447.855063]  auxiliary_bus_remove+0x30/0x4c
[  447.859227]  __device_release_driver+0x190/0x23c
[  447.863825]  device_release_driver+0x38/0x50
[  447.868076]  bus_remove_device+0x130/0x140
[  447.872154]  device_del+0x184/0x434
[  447.875628]  delete_drivers+0x54/0xe0
[  447.879274]  mlx5_unregister_device+0x40/0x80
[  447.883611]  mlx5_uninit_one+0x34/0xd4
[  447.887343]  remove_one+0x4c/0xd0
[  447.890644]  pci_device_remove+0x48/0xe0
[  447.894549]  __device_release_driver+0x190/0x23c
[  447.899146]  device_release_driver+0x38/0x50
[  447.903396]  pci_stop_bus_device+0x8c/0xd0
[  447.907473]  pci_stop_and_remove_bus_device+0x24/0x40
[  447.912501]  pci_iov_remove_virtfn+0xb8/0x130
[  447.916838]  pci_reset_iov_state+0x5c/0xb0
[  447.920916]  pcie_flr+0x38/0x130
[  447.924131]  pcie_reset_flr+0x40/0x54
[  447.927777]  __pci_reset_function_locked+0x54/0x80
[  447.932547]  pci_reset_function+0x4c/0x90
[  447.936538]  reset_store+0x70/0xc0
[  447.939924]  dev_attr_store+0x24/0x40
[  447.943570]  sysfs_kf_write+0x50/0x60
[  447.947216]  kernfs_fop_write_iter+0x124/0x1b4
[  447.951640]  new_sync_write+0xf0/0x190
[  447.955373]  vfs_write+0x25c/0x2c0
[  447.958760]  ksys_write+0x78/0x104
[  447.962147]  __arm64_sys_write+0x28/0x3c
[  447.966052]  invoke_syscall+0x50/0x120
[  447.969784]  el0_svc_common.constprop.0+0x188/0x190
[  447.974639]  do_el0_svc+0x30/0x90
[  447.977939]  el0_svc+0x20/0x90
[  447.980980]  el0t_64_sync_handler+0x1a8/0x1ac
[  447.985316]  el0t_64_sync+0x1a0/0x1a4
[  447.988961] ---[ end trace d334416dff5120e7 ]---
[  447.993669] ------------[ cut here ]------------
[  447.998264] WARNING: CPU: 37 PID: 4328 at drivers/infiniband/core/verbs.c:347 ib_dealloc_pd_user+0x94/0x9c
[  448.007872] Modules linked in: bluetooth rfkill xt_addrtype iptable_filter xt_conntrack overlay dm_mod ib_isert iscsi_target_mod rpcrdma ib_umad ib_iser ib_ipoib libiscsi scsi_transport_iscsi mlx5_ib hns_roce_hw_v2 hisi_hpre hisi_sec2 sbsa_gwdt hisi_zip hisi_trng_v2 arm_spe_pmu hisi_qm hisi_uncore_l3c_pmu hisi_uncore_hha_pmu uacce hisi_uncore_ddrc_pmu crct10dif_ce rng_core spi_dw_mmio hisi_uncore_pmu hns3 hclge hisi_sas_v3_hw hnae3 hisi_sas_main libsas
[  448.047740] CPU: 37 PID: 4328 Comm: bash Kdump: loaded Tainted: G        W         5.16.0-pcie-iov+ #14
[  448.057088] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V5.B221.01 12/09/2021
[  448.065917] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  448.072845] pc : ib_dealloc_pd_user+0x94/0x9c
[  448.077183] lr : ib_dealloc_pd_user+0x3c/0x9c
[  448.081519] sp : ffff80006172b7c0
[  448.084819] x29: ffff80006172b7c0 x28: ffff008009880000 x27: 0000000000000000
[  448.091922] x26: ffff00800e8c00d0 x25: 0000000000000000 x24: ffff008009880000
[  448.099025] x23: 0000000000000080 x22: ffffd9e70116cfd0 x21: ffffd9e701163d28
[  448.106128] x20: 0000000000000000 x19: ffff00414927d080 x18: 0000000000000030
[  448.113230] x17: 657266206f742064 x16: ffffd9e77641d550 x15: 0000000000000000
[  448.120333] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[  448.127435] x11: 0000000000000000 x10: 0000000000000bb0 x9 : ffffd9e77641d820
[  448.134537] x8 : ffff008009880c10 x7 : 0000000000000000 x6 : 0000000000000001
[  448.141640] x5 : ffffd9e701141da8 x4 : 0000000000000000 x3 : ffff0041396fe400
[  448.148743] x2 : 16e32808cb35d300 x1 : 0000000000000000 x0 : 0000000000000002
[  448.155846] Call trace:
[  448.158280]  ib_dealloc_pd_user+0x94/0x9c
[  448.162271]  mlx5_ib_dev_res_cleanup+0x90/0x150 [mlx5_ib]
[  448.167654]  mlx5r_remove+0x54/0x80 [mlx5_ib]
[  448.171997]  auxiliary_bus_remove+0x30/0x4c
[  448.176161]  __device_release_driver+0x190/0x23c
[  448.180756]  device_release_driver+0x38/0x50
[  448.185007]  bus_remove_device+0x130/0x140
[  448.189085]  device_del+0x184/0x434
[  448.192558]  delete_drivers+0x54/0xe0
[  448.196204]  mlx5_unregister_device+0x40/0x80
[  448.200541]  mlx5_uninit_one+0x34/0xd4
[  448.204273]  remove_one+0x4c/0xd0
[  448.207574]  pci_device_remove+0x48/0xe0
[  448.211480]  __device_release_driver+0x190/0x23c
[  448.216075]  device_release_driver+0x38/0x50
[  448.220326]  pci_stop_bus_device+0x8c/0xd0
[  448.224404]  pci_stop_and_remove_bus_device+0x24/0x40
[  448.229431]  pci_iov_remove_virtfn+0xb8/0x130
[  448.233769]  pci_reset_iov_state+0x5c/0xb0
[  448.237846]  pcie_flr+0x38/0x130
[  448.241060]  pcie_reset_flr+0x40/0x54
[  448.244706]  __pci_reset_function_locked+0x54/0x80
[  448.249475]  pci_reset_function+0x4c/0x90
[  448.253467]  reset_store+0x70/0xc0
[  448.256853]  dev_attr_store+0x24/0x40
[  448.260499]  sysfs_kf_write+0x50/0x60
[  448.264146]  kernfs_fop_write_iter+0x124/0x1b4
[  448.268569]  new_sync_write+0xf0/0x190
[  448.272301]  vfs_write+0x25c/0x2c0
[  448.275688]  ksys_write+0x78/0x104
[  448.279075]  __arm64_sys_write+0x28/0x3c
[  448.282980]  invoke_syscall+0x50/0x120
[  448.286714]  el0_svc_common.constprop.0+0x188/0x190
[  448.291571]  do_el0_svc+0x30/0x90
[  448.294871]  el0_svc+0x20/0x90
[  448.297911]  el0t_64_sync_handler+0x1a8/0x1ac
[  448.302249]  el0t_64_sync+0x1a0/0x1a4
[  448.305894] ---[ end trace d334416dff5120e8 ]---
[  448.363136] restrack: ------------[ cut here ]------------
[  448.368601] infiniband mlx5_2: BUG: RESTRACK detected leak of resources
[  448.375187] restrack: Kernel PD object allocated by mlx5_ib is not freed
[  448.381861] restrack: Kernel PD object allocated by ib_core is not freed
[  448.388534] restrack: Kernel PD object allocated by mlx5_ib is not freed
[  448.395207] restrack: Kernel CQ object allocated by mlx5_ib is not freed
[  448.401879] restrack: Kernel SRQ object allocated by mlx5_ib is not freed
[  448.408638] restrack: Kernel SRQ object allocated by mlx5_ib is not freed
[  448.415401] restrack: ------------[ cut here ]------------
[  448.455025] mlx5_core 0000:01:00.0: poll_health:795:(pid 0): Fatal error 1 detected
[  448.455107] pcieport 0000:00:00.0: AER: Corrected error received: 0000:01:00.0
[  448.469914] mlx5_core 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Transaction Layer, (Receiver ID)
[  448.479792] mlx5_core 0000:01:00.0:   device [15b3:1019] error status/mask=00002000/00000000
[  448.488196] mlx5_core 0000:01:00.0:    [13] NonFatalErr
[  448.494415] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:01:00.0
[  448.502452] mlx5_core 0000:01:00.1: PCIe Bus Error: severity=Corrected, type=Transaction Layer, (Receiver ID)
[  448.512324] mlx5_core 0000:01:00.1:   device [15b3:1019] error status/mask=00002000/00000000
[  448.520726] mlx5_core 0000:01:00.1:    [13] NonFatalErr
[  448.526951] pcieport 0000:00:00.0: AER: Corrected error received: 0000:01:00.0
[  448.534176] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:01:00.0
[  448.619235] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 8192 of flow group id 19
[  448.630750] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 21 of ft 262149
[  448.641277] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 20 of ft 262149
[  448.651794] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 19 of ft 262149
[  448.662309] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 18 of ft 262149
[  448.672830] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 17 of ft 262149
[  448.683417] mlx5_core 0000:01:00.2: update_root_ft_destroy:2127:(pid 4328): Update root flow table of id(262149) qpn(0) failed
[  448.694843] mlx5_core 0000:01:00.2: del_hw_flow_table:507:(pid 4328): flow steering can't destroy ft
[  448.703993] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 16 of ft 262148
[  448.714516] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 15 of ft 262148
[  448.725033] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 14 of ft 262148
[  448.735564] mlx5_core 0000:01:00.2: del_hw_flow_table:507:(pid 4328): flow steering can't destroy ft
[  448.744714] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 0 of flow group id 11
[  448.755936] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 1 of flow group id 11
[  448.767145] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 2 of flow group id 11
[  448.778352] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 3 of flow group id 11
[  448.789558] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 4 of flow group id 11
[  448.800770] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 5 of flow group id 11
[  448.812049] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 6 of flow group id 11
[  448.823261] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 7 of flow group id 11
[  448.834471] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 14 of flow group id 12
[  448.845774] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 15 of flow group id 12
[  448.857072] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 16 of flow group id 13
[  448.868370] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 8 of flow group id 11
[  448.879579] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 9 of flow group id 11
[  448.890788] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 10 of flow group id 11
[  448.902087] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 11 of flow group id 11
[  448.913382] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 12 of flow group id 11
[  448.924675] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 13 of flow group id 11
[  448.935980] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 13 of ft 2
[  448.946072] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 12 of ft 2
[  448.956160] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 11 of ft 2
[  448.966249] mlx5_core 0000:01:00.2: del_hw_flow_table:507:(pid 4328): flow steering can't destroy ft
[  448.975395] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 0 of flow group id 8
[  448.986526] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 1 of flow group id 8
[  448.997647] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 2 of flow group id 8
[  449.008768] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 3 of flow group id 8
[  449.019890] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 4 of flow group id 8
[  449.031013] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 5 of flow group id 8
[  449.042135] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 6 of flow group id 8
[  449.053257] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 7 of flow group id 8
[  449.064380] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 8 of flow group id 9
[...]


> 	pcibios_sriov_disable(dev);
> 
> 	if (iov->link != dev->devfn)
> 		sysfs_remove_link(&dev->dev.kobj, "dep_link");
> 
> 	iov->num_VFs = 0;
> 
> 	if (!flr)
> 		pci_iov_set_numvfs(dev, 0);
> }
> 
> Whether this is better, I leave to your evaluation.
> 
> Thanks,
> Lukasz
> 
>> Did you test with or without my patch?
>>
>> Here is the result with my patch for the NVMe device in QEMU:
>>
>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -s 01:
>> 01:00.0 Non-Volatile memory controller: Red Hat, Inc. Device 0010 (rev 02)
>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>>         Capabilities: [120 v1] Single Root I/O Virtualization (SR-IOV)
>>                 IOVCap: Migration-, Interrupt Message Number: 000
>>                 IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
>>                 IOVSta: Migration-
>>                 Initial VFs: 8, Total VFs: 8, Number of VFs: 0, Function Dependency Link: 00
>>                 VF offset: 1, stride: 1, Device ID: 0010
>>                 VF Migration: offset: 00000000, BIR: 0
>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# echo 1 > sriov_numvfs
>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>>         Capabilities: [120 v1] Single Root I/O Virtualization (SR-IOV)
>>                 IOVCap: Migration-, Interrupt Message Number: 000
>>                 IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+
>>                 IOVSta: Migration-
>>                 Initial VFs: 8, Total VFs: 8, Number of VFs: 1, Function Dependency Link: 00
>>                 VF offset: 1, stride: 1, Device ID: 0010
>>                 VF Migration: offset: 00000000, BIR: 0
>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# echo 1 > reset
>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>>         Capabilities: [120 v1] Single Root I/O Virtualization (SR-IOV)
>>                 IOVCap: Migration-, Interrupt Message Number: 000
>>                 IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+
>>                 IOVSta: Migration-
>>                 Initial VFs: 8, Total VFs: 8, Number of VFs: 0, Function Dependency Link: 00
>>                 VF offset: 1, stride: 1, Device ID: 0010
>>                 VF Migration: offset: 00000000, BIR: 0
>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -xxx -s 01:00.0
>> 01:00.0 Non-Volatile memory controller: Red Hat, Inc. Device 0010 (rev 02)
>> 00: 36 1b 10 00 07 05 10 00 02 02 08 01 00 00 00 00
>> 10: 04 00 80 fe 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f4 1a 00 11
>> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00
>> 40: 11 80 40 80 00 20 00 00 00 30 00 00 00 00 00 00
>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 60: 01 00 03 00 08 00 00 00 00 00 00 00 00 00 00 00
>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 80: 10 60 02 00 00 80 00 10 00 00 00 00 11 04 00 00
>> 90: 00 00 11 00 00 00 00 00 00 00 00 00 00 00 00 00
>> a0: 00 00 00 00 00 00 30 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# cat reset_method
>> flr bus
>>
>>>
>>> [root@localhost ~]# lspci  -s 01:
>>> 01:00.0 Ethernet controller: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
>>> 01:00.1 Ethernet controller: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
>>> [root@localhost ~]# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>>>         Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
>>>                 IOVCap: Migration- 10BitTagReq- Interrupt Message Number: 000
>>>                 IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+ 10BitTagReq-
>>>                 IOVSta: Migration-
>>>                 Initial VFs: 16, Total VFs: 16, Number of VFs: 0, Function Dependency Link: 00
>>>                 VF offset: 2, stride: 1, Device ID: 101a
>>>                 VF Migration: offset: 00000000, BIR: 0
>>> [root@localhost 0000:01:00.0]# echo 1 > sriov_numvfs
>>> [root@localhost ~]# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>>>         Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
>>>                 IOVCap: Migration- 10BitTagReq- Interrupt Message Number: 000
>>>                 IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+ 10BitTagReq-
>>>                 IOVSta: Migration-
>>>                 Initial VFs: 16, Total VFs: 16, Number of VFs: 1, Function Dependency Link: 00
>>>                 VF offset: 2, stride: 1, Device ID: 101a
>>>                 VF Migration: offset: 00000000, BIR: 0
>>> [root@localhost 0000:01:00.0]# echo 1 > reset
>>> [root@localhost ~]# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>>>         Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
>>>                 IOVCap: Migration- 10BitTagReq- Interrupt Message Number: 000
>>>                 IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+ 10BitTagReq-
>>>                 IOVSta: Migration-
>>>                 Initial VFs: 16, Total VFs: 16, Number of VFs: 1, Function Dependency Link: 00
>>>                 VF offset: 2, stride: 1, Device ID: 101a
>>>                 VF Migration: offset: 00000000, BIR: 0
>>> [root@localhost ~]# lspci -xxx -s 01:00.0
>>> 01:00.0 Ethernet controller: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
>>> 00: b3 15 19 10 46 05 10 00 00 00 00 02 08 00 80 00
>>> 10: 0c 00 00 00 00 08 00 00 00 00 00 00 00 00 00 00
>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 b3 15 08 00
>>> 30: 00 00 70 e6 60 00 00 00 00 00 00 00 ff 01 00 00
>>> 40: 01 00 c3 81 08 00 00 00 03 9c cc 80 00 78 00 00
>>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 01
>>> 60: 10 48 02 00 e2 8f e0 11 5f 29 00 00 04 71 41 00
>>> 70: 08 00 04 11 00 00 00 00 00 00 00 00 00 00 00 00
>>> 80: 00 00 00 00 17 00 01 00 40 00 00 00 1e 00 80 01
>>> 90: 04 00 1e 00 00 00 00 00 00 00 00 00 11 c0 3f 80
>>> a0: 00 20 00 00 00 30 00 00 00 00 00 00 00 00 00 00
>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> c0: 09 40 18 00 0a 00 00 20 f0 1a 00 00 00 00 00 00
>>> d0: 20 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
>>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> [root@localhost 0000:01:00.0]# cat reset_method
>>> flr bus
>>>
>>> On 2022/1/19 10:47, Yicong Yang wrote:
>>>> On 2022/1/19 0:30, Lukasz Maniak wrote:
>>>>> On Tue, Jan 18, 2022 at 07:07:23PM +0800, Yicong Yang wrote:
>>>>>> On 2022/1/18 6:55, Bjorn Helgaas wrote:
>>>>>>> [+cc Alex in case he has comments on how FLR should work on
>>>>>>> non-conforming hns3 devices]
>>>>>>>
>>>>>>> On Sat, Jan 15, 2022 at 05:22:19PM +0800, Yicong Yang wrote:
>>>>>>>> On 2022/1/15 0:37, Bjorn Helgaas wrote:
>>>>>>>>> On Fri, Jan 14, 2022 at 05:42:48PM +0800, Yicong Yang wrote:
>>>>>>>>>> On 2022/1/14 0:45, Lukasz Maniak wrote:
>>>>>>>>>>> On Wed, Jan 12, 2022 at 08:49:03AM -0600, Bjorn Helgaas wrote:
>>>>>>>>>>>> On Wed, Dec 22, 2021 at 08:19:57PM +0100, Lukasz Maniak wrote:
>>>>>>>>>>>>> As per PCI Express specification, FLR to a PF resets the PF state as
>>>>>>>>>>>>> well as the SR-IOV extended capability including VF Enable which means
>>>>>>>>>>>>> that VFs no longer exist.
>>>>>>>>>>>>
>>>>>>>>>>>> Can you add a specific reference to the spec, please?
>>>>>>>>>>>>
>>>>>>>>>>> Following the Single Root I/O Virtualization and Sharing Specification:
>>>>>>>>>>> 2.2.3. FLR That Targets a PF
>>>>>>>>>>> PFs must support FLR.
>>>>>>>>>>> FLR to a PF resets the PF state as well as the SR-IOV extended
>>>>>>>>>>> capability including VF Enable which means that VFs no longer exist.
>>>>>>>>>>>
>>>>>>>>>>> For PCI Express Base Specification Revision 5.0 and later, this is
>>>>>>>>>>> section 9.2.2.3.
>>>>>>>>>
>>>>>>>>> This is also the section in the new PCIe r6.0.  Let's use that.
>>>>>>>>>
>>>>>>>>>>>>> Currently, the IOV state is not updated during FLR, resulting in
>>>>>>>>>>>>> non-compliant PCI driver behavior.
>>>>>>>>>>>>
>>>>>>>>>>>> And include a little detail about what problem is observed?  How would
>>>>>>>>>>>> a user know this problem is occurring?
>>>>>>>>>>>>
>>>>>>>>>>> The problem is that the state of the kernel and HW as to the number of
>>>>>>>>>>> VFs gets out of sync after FLR.
>>>>>>>>>>>
>>>>>>>>>>> This results in further listing, after the FLR is performed by the HW,
>>>>>>>>>>> of VFs that actually no longer exist and should no longer be reported on
>>>>>>>>>>> the PCI bus. lspci return FFs for these VFs.
>>>>>>>>>>
>>>>>>>>>> There're some exceptions. Take HiSilicon's hns3 and sec device as an
>>>>>>>>>> example, the VF won't be destroyed after the FLR reset.
>>>>>>>>>
>>>>>>>>> If FLR on an hns3 PF does *not* clear VF Enable, and the VFs still
>>>>>>>>> exist after FLR, isn't that a violation of sec 9.2.2.3?
>>>>>>>>
>>>>>>>> yes I think it's a violation to the spec.
>>>>>>>
>>>>>>> Thanks for confirming that.
>>>>>>>
>>>>>>>>> If hns3 and sec don't conform to the spec, we should have some sort of
>>>>>>>>> quirk that serves to document and work around this.
>>>>>>>>
>>>>>>>> ok I think it'll help. Do you mean something like this based on this patch:
>>>>>>>>
>>>>>>>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
>>>>>>>> index 69ee321027b4..0e4976c669b2 100644
>>>>>>>> --- a/drivers/pci/iov.c
>>>>>>>> +++ b/drivers/pci/iov.c
>>>>>>>> @@ -1025,6 +1025,8 @@ void pci_reset_iov_state(struct pci_dev *dev)
>>>>>>>>  		return;
>>>>>>>>  	if (!iov->num_VFs)
>>>>>>>>  		return;
>>>>>>>> +	if (dev->flr_no_vf_reset)
>>>>>>>> +		return;
>>>>>>>>
>>>>>>>>  	sriov_del_vfs(dev);
>>>>>>>>
>>>>>>>> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
>>>>>>>> index 003950c738d2..c8ffcb0ac612 100644
>>>>>>>> --- a/drivers/pci/quirks.c
>>>>>>>> +++ b/drivers/pci/quirks.c
>>>>>>>> @@ -1860,6 +1860,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa256, quirk_huawei_pcie_sva);
>>>>>>>>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa258, quirk_huawei_pcie_sva);
>>>>>>>>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa259, quirk_huawei_pcie_sva);
>>>>>>>>
>>>>>>>> +/*
>>>>>>>> + * Some HiSilicon PCIe devices' VF won't be destroyed after a FLR reset.
>>>>>>>> + * Don't reset these devices' IOV state when doing FLR.
>>>>>>>> + */
>>>>>>>> +static void quirk_huawei_pcie_flr(struct pci_dev *pdev)
>>>>>>>> +{
>>>>>>>> +	pdev->flr_no_vf_reset = 1;
>>>>>>>> +}
>>>>>>>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa255, quirk_huawei_pcie_flr);
>>>>>>>> +/* ...some other devices have this quirk */
>>>>>>>
>>>>>>> Yes, I think something along this line will help.
>>>>>>>
>>>>>>>> diff --git a/include/linux/pci.h b/include/linux/pci.h
>>>>>>>> index 18a75c8e615c..e62f9fa4d48f 100644
>>>>>>>> --- a/include/linux/pci.h
>>>>>>>> +++ b/include/linux/pci.h
>>>>>>>> @@ -454,6 +454,7 @@ struct pci_dev {
>>>>>>>>  	unsigned int	is_probed:1;		/* Device probing in progress */
>>>>>>>>  	unsigned int	link_active_reporting:1;/* Device capable of reporting link active */
>>>>>>>>  	unsigned int	no_vf_scan:1;		/* Don't scan for VFs after IOV enablement */
>>>>>>>> +	unsigned int	flr_no_vf_reset:1;	/* VF won't be destroyed after PF's FLR */
>>>>>>>>
>>>>>>>>>> Currently the transactions with the VF will be restored after the
>>>>>>>>>> FLR. But this patch will break that, the VF is fully disabled and
>>>>>>>>>> the transaction cannot be restored. User needs to reconfigure it,
>>>>>>>>>> which is unnecessary before this patch.
>>>>>>>>>
>>>>>>>>> What does it mean for a "transaction to be restored"?  Maybe you mean
>>>>>>>>> this patch removes the *VFs* via sriov_del_vfs(), and whoever
>>>>>>>>> initiated the FLR would need to re-enable VFs via pci_enable_sriov()
>>>>>>>>> or something similar?
>>>>>>>>
>>>>>>>> Partly. It'll also terminate the VF users.
>>>>>>>> Think that I attach the VF of hns to a VM by vfio and ping the network
>>>>>>>> in the VM, when doing FLR the 'ping' will pause and after FLR it'll
>>>>>>>> resume. Currenlty The driver handle this in the ->reset_{prepare, done}()
>>>>>>>> methods. The user of VM may not realize there is a FLR of the PF as the
>>>>>>>> VF always exists and the 'ping' is never terminated.
>>>>>>>>
>>>>>>>> If we remove the VF when doing FLR, then 1) we'll block in the VF->remove()
>>>>>>>> until no one is using the device, for example the 'ping' is finished.
>>>>>>>> 2) the VF in the VM no longer exists and we have to re-enable VF and hotplug
>>>>>>>> it into the VM and restart the ping. That's a big difference.
>>>>>>>>
>>>>>>>>> If FLR disables VFs, it seems like we should expect to have to
>>>>>>>>> re-enable them if we want them.
>>>>>>>>
>>>>>>>> It involves a remove()/probe() process of the VF driver and the user
>>>>>>>> of the VF will be terminated, just like the situation illustrated
>>>>>>>> above.
>>>>>>>
>>>>>>> I think users of FLR should be able to rely on it working per spec,
>>>>>>> i.e., that VFs will be destroyed.  If hardware like hns3 doesn't do
>>>>>>> that, the quirk should work around that in software by doing it
>>>>>>> explicitly.
>>>>>>>
>>>>>>> I don't think the non-standard behavior should be exposed to the
>>>>>>> users.  The user should not have to know about this hns3 issue.
>>>>>>>
>>>>>>> If FLR on a standard NIC terminates a ping on a VF, FLR on an hns3 NIC
>>>>>>> should also terminate a ping on a VF.
>>>>>>>
>>>>>>
>>>>>> ok thanks for the discussion, agree on that. According to the spec, after
>>>>>> the FLR to the PF the VF does not exist anymore, so the ping will be terminated.
>>>>>> Our hns3 and sec team are still evaluating it before coming to a solution of
>>>>>> whether using a quirk or comform to the spec.
>>>>>>
>>>>>> For this patch it looks reasonable to me, but some questions about the code below.
>>>>>>
>>>>>>>>>> Can we handle this problem in another way? Maybe test the VF's
>>>>>>>>>> vendor device ID after the FLR reset to see whether it has really
>>>>>>>>>> gone or not?
>>>>>>>>>>
>>>>>>>>>>> sriov_numvfs in sysfs returns old invalid value and does not allow
>>>>>>>>>>> setting a new value before explicitly setting 0 in the first place.
>>>>>>>>>>>
>>>>>>>>>>>>> This patch introduces a simple function, called on the FLR path, that
>>>>>>>>>>>>> removes the virtual function devices from the PCI bus and their
>>>>>>>>>>>>> corresponding sysfs links with a final clear of the num_vfs value in IOV
>>>>>>>>>>>>> state.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
>>>>>>>>>>>>> ---
>>>>>>>>>>>>>  drivers/pci/iov.c | 21 +++++++++++++++++++++
>>>>>>>>>>>>>  drivers/pci/pci.c |  2 ++
>>>>>>>>>>>>>  drivers/pci/pci.h |  4 ++++
>>>>>>>>>>>>>  3 files changed, 27 insertions(+)
>>>>>>>>>>>>>
>>>>>>>>>>>>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
>>>>>>>>>>>>> index 0267977c9f17..69ee321027b4 100644
>>>>>>>>>>>>> --- a/drivers/pci/iov.c
>>>>>>>>>>>>> +++ b/drivers/pci/iov.c
>>>>>>>>>>>>> @@ -1013,6 +1013,27 @@ int pci_iov_bus_range(struct pci_bus *bus)
>>>>>>>>>>>>>  	return max ? max - bus->number : 0;
>>>>>>>>>>>>>  }
>>>>>>>>>>>>>  
>>>>>>>>>>>>> +/**
>>>>>>>>>>>>> + * pci_reset_iov_state - reset the state of the IOV capability
>>>>>>>>>>>>> + * @dev: the PCI device
>>>>>>>>>>>>> + */
>>>>>>>>>>>>> +void pci_reset_iov_state(struct pci_dev *dev)
>>>>>>>>>>>>> +{
>>>>>>>>>>>>> +	struct pci_sriov *iov = dev->sriov;
>>>>>>>>>>>>> +
>>>>>>>>>>>>> +	if (!dev->is_physfn)
>>>>>>>>>>>>> +		return;
>>>>>>>>>>>>> +	if (!iov->num_VFs)
>>>>>>>>>>>>> +		return;
>>>>>>>>>>>>> +
>>>>>>>>>>>>> +	sriov_del_vfs(dev);
>>>>>>>>>>>>> +
>>>>>>>>>>>>> +	if (iov->link != dev->devfn)
>>>>>>>>>>>>> +		sysfs_remove_link(&dev->dev.kobj, "dep_link");
>>>>>>>>>>>>> +
>>>>>>>>>>>>> +	iov->num_VFs = 0;
>>>>>>>>>>>>> +}
>>>>>>>>>>>>> +
>>>>>>
>>>>>> Any reason for not using pci_disable_sriov()?
>>>>>
>>>>> The issue with pci_disable_sriov() is that it calls sriov_disable(),
>>>>> which directly uses pci_cfg_access_lock(), leading to deadlock on the
>>>>> FLR path.
>>>>>
>>>>
>>>> That'll be a problem. Well my main concern is whether the VFs will be reset
>>>> correctly through pci_reset_iov_state() as it lacks the participant of
>>>> PF driver and bios (seems may needed only on powerpc, not sure), which is
>>>> necessary in the enable/disable routine through $pci_dev/sriov_numvfs.
>>>>
>>>>>>
>>>>>> With the spec the related registers in the SRIOV cap will be reset so
>>>>>> it's ok in general. But for some devices not following the spec like hns3,
>>>>>> some fields like VF enable won't be reset and keep enabled after the FLR.
>>>>>> In this case after the FLR the VF devices in the system has gone but
>>>>>> the state of the PF SRIOV cap leaves uncleared. pci_disable_sriov()
>>>>>> will reset the whole SRIOV cap. It'll also call pcibios_sriov_disable()
>>>>>> to correct handle the VF disabling on some platforms, IIUC.
>>>>>>
>>>>>> Or is it better to use pdev->driver->sriov_configure(pdev,0)?
>>>>>> PF drivers must implement ->sriov_configure() for enabling/disabling
>>>>>> the VF but we totally skip the PF driver here.
>>>>>>
>>>>>> Thanks,
>>>>>> Yicong
>>>>>>
>>>>>>>>>>>>>  /**
>>>>>>>>>>>>>   * pci_enable_sriov - enable the SR-IOV capability
>>>>>>>>>>>>>   * @dev: the PCI device
>>>>>>>>>>>>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>>>>>>>>>>>>> index 3d2fb394986a..535f19d37e8d 100644
>>>>>>>>>>>>> --- a/drivers/pci/pci.c
>>>>>>>>>>>>> +++ b/drivers/pci/pci.c
>>>>>>>>>>>>> @@ -4694,6 +4694,8 @@ EXPORT_SYMBOL(pci_wait_for_pending_transaction);
>>>>>>>>>>>>>   */
>>>>>>>>>>>>>  int pcie_flr(struct pci_dev *dev)
>>>>>>>>>>>>>  {
>>>>>>>>>>>>> +	pci_reset_iov_state(dev);
>>>>>>>>>>>>> +
>>>>>>>>>>>>>  	if (!pci_wait_for_pending_transaction(dev))
>>>>>>>>>>>>>  		pci_err(dev, "timed out waiting for pending transaction; performing function level reset anyway\n");
>>>>>>>>>>>>>  
>>>>>>>>>>>>> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
>>>>>>>>>>>>> index 3d60cabde1a1..7bb144fbec76 100644
>>>>>>>>>>>>> --- a/drivers/pci/pci.h
>>>>>>>>>>>>> +++ b/drivers/pci/pci.h
>>>>>>>>>>>>> @@ -480,6 +480,7 @@ void pci_iov_update_resource(struct pci_dev *dev, int resno);
>>>>>>>>>>>>>  resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
>>>>>>>>>>>>>  void pci_restore_iov_state(struct pci_dev *dev);
>>>>>>>>>>>>>  int pci_iov_bus_range(struct pci_bus *bus);
>>>>>>>>>>>>> +void pci_reset_iov_state(struct pci_dev *dev);
>>>>>>>>>>>>>  extern const struct attribute_group sriov_pf_dev_attr_group;
>>>>>>>>>>>>>  extern const struct attribute_group sriov_vf_dev_attr_group;
>>>>>>>>>>>>>  #else
>>>>>>>>>>>>> @@ -501,6 +502,9 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
>>>>>>>>>>>>>  {
>>>>>>>>>>>>>  	return 0;
>>>>>>>>>>>>>  }
>>>>>>>>>>>>> +static inline void pci_reset_iov_state(struct pci_dev *dev)
>>>>>>>>>>>>> +{
>>>>>>>>>>>>> +}
>>>>>>>>>>>>>  
>>>>>>>>>>>>>  #endif /* CONFIG_PCI_IOV */
>>>>>>> .
>>>>>>>
>>>>> .
>>>>>
>>>> .
>>>>
> .
> 

Re: [PATCH] PCI: Reset IOV state on FLR to PF

[Saeed Mahameed]

On 20 Jan 21:16, Yicong Yang wrote:
>On 2022/1/20 1:09, Lukasz Maniak wrote:
>> On Wed, Jan 19, 2022 at 05:06:55PM +0100, Lukasz Maniak wrote:
>>> On Wed, Jan 19, 2022 at 06:22:07PM +0800, Yicong Yang wrote:
>>>> Hi Lukasz, Bjorn,
>>>>
>>>> FYI, I tested with Mellanox CX-5, the VF also exists after FLR. Here's the operation:
>>>
>>
>> Please disregard my previous email. I missed your point.
>> I take it that the Mellanox CX-5 also violates the spec.
>>
>> As for using pci_disable_sriov() I did a test to get a backtrace for
>> deadlock:
>> [  846.904248] Call Trace:
>> [  846.904251]  <TASK>
>> [  846.904272]  __schedule+0x302/0x950
>> [  846.904282]  schedule+0x58/0xd0
>> [  846.904286]  pci_wait_cfg+0x63/0xb0
>> [  846.904290]  ? wait_woken+0x70/0x70
>> [  846.904296]  pci_cfg_access_lock+0x48/0x50
>> [  846.904300]  sriov_disable+0x4d/0xf0
>> [  846.904306]  pci_disable_sriov+0x26/0x30
>> [  846.904310]  pcie_flr+0x2b/0x100
>> [  846.904317]  pcie_reset_flr+0x25/0x30
>> [  846.904322]  __pci_reset_function_locked+0x42/0x60
>> [  846.904327]  pci_reset_function+0x40/0x70
>> [  846.904334]  reset_store+0x5c/0xa0
>> [  846.904347]  dev_attr_store+0x17/0x30
>> [  846.904357]  sysfs_kf_write+0x3f/0x50
>> [  846.904365]  kernfs_fop_write_iter+0x13b/0x1d0
>> [  846.904371]  new_sync_write+0x117/0x1b0
>> [  846.904379]  vfs_write+0x219/0x2b0
>> [  846.904384]  ksys_write+0x67/0xe0
>> [  846.904390]  __x64_sys_write+0x1a/0x20
>> [  846.904395]  do_syscall_64+0x5c/0xc0
>> [  846.904401]  ? debug_smp_processor_id+0x17/0x20
>> [  846.904406]  ? fpregs_assert_state_consistent+0x26/0x50
>> [  846.904413]  ? exit_to_user_mode_prepare+0x3f/0x1b0
>> [  846.904418]  ? irqentry_exit_to_user_mode+0x9/0x20
>> [  846.904423]  ? irqentry_exit+0x33/0x40
>> [  846.904427]  ? exc_page_fault+0x89/0x180
>> [  846.904431]  ? asm_exc_page_fault+0x8/0x30
>> [  846.904438]  entry_SYSCALL_64_after_hwframe+0x44/0xae
>>
>> As can be noticed during FLR we are already on a locked path for the
>> device in __pci_reset_function_locked(). In addition, the device will reset
>> the BARs during FLR on its own.
>>
>> If we still would like to use pci_disable_sriov() for this purpose we
>> need to pass a flag to sriov_disable() and use conditionally twice. It
>> would look something like this:
>>
>> static void sriov_disable(struct pci_dev *dev, bool flr)
>> {
>> 	struct pci_sriov *iov = dev->sriov;
>>
>> 	if (!iov->num_VFs)
>> 		return;
>>
>> 	sriov_del_vfs(dev);
>>
>> 	if (!flr) {
>> 		iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
>> 		pci_cfg_access_lock(dev);
>> 		pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
>> 		ssleep(1);
>> 		pci_cfg_access_unlock(dev);
>> 	}
>>
>
>It still leaves the VFE uncleared. So after reset the hardware IOV state is unsynchronized
>with the system as we've removed the VFs already. so you may need:
>
>static void sriov_disable(struct pci_dev *dev, bool locked)
>{
>	struct pci_sriov *iov = dev->sriov;
>
>	if (!iov->num_VFs)
>		return;
>
>	sriov_del_vfs(dev);
>
>	iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
>	if (!locked)
>		pci_cfg_access_lock(dev);
>	pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
>	ssleep(1);
>	if (!locked)
>		pci_cfg_access_unlock(dev);
>
>	pcibios_sriov_disable(dev);
>
>	if (iov->link != dev->devfn)
>		sysfs_remove_link(&dev->dev.kobj, "dep_link");
>
>	iov->num_VFs = 0;
>
>	if (!flr)
>		pci_iov_set_numvfs(dev, 0);
>}
>
>I'm not sure this is correct as we disable VF not through PF driver
>and whether these PF driver involed need to modified after this
>change.
>(Yes through pdev->driver->sriov_configure() we'll also meet the
>deadlock problem but that's the next step question).
>
>With your patch based on 5.16 release when doing FLR reset on VF's PF
>of Mellanox CX-5, the log says that there's a resource leakage and
>leads to several calltraces. I paste the log below.
>
>Perhaps Mellanox maintainers could help on this.
>
>Thanks.
>
>[  435.211235] mlx5_core 0000:01:00.0: E-Switch: Enable: mode(LEGACY), nvfs(1), active vports(2)
>[  435.327158] pci 0000:01:00.2: [15b3:101a] type 00 class 0x020000
>[  435.333197] pci 0000:01:00.2: enabling Extended Tags
>[  435.338936] pci 0000:01:00.2: calling  mellanox_check_broken_intx_masking+0x0/0x1a0 @ 4328
>[  435.347174] pci 0000:01:00.2: mellanox_check_broken_intx_masking+0x0/0x1a0 took 0 usecs
>[  435.355224] mlx5_core 0000:01:00.2: Adding to iommu group 49
>[  435.361639] mlx5_core 0000:01:00.2: enabling device (0000 -> 0002)
>[  435.367917] mlx5_core 0000:01:00.2: firmware version: 16.27.1016
>[  435.611252] mlx5_core 0000:01:00.2: Rate limit: 127 rates are supported, range: 0Mbps to 97656Mbps
>[  435.628931] mlx5_core 0000:01:00.2: Assigned random MAC address 72:51:df:ba:6a:1e
>[  435.636824] mlx5_core 0000:01:00.2: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>[  435.744665] mlx5_core 0000:01:00.2: Supported tc offload range - chains: 1, prios: 1
>[  446.080370] mlx5_core 0000:01:00.2: mlx5_cmd_check:782:(pid 4328): 2RST_QP(0x50a) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x7ea02d)
>[  446.094054] infiniband mlx5_2: destroy_qp_common:2599:(pid 4328): mlx5_ib: modify QP 0x000504 to RESET failed


BAD_RES_STATE       | 0x7EA02D |  2error_qp/2reset: invalid qp number.
This is the source of the resource leak, all others are failing as side
effect to this.

This is due to mlx5_ib trying to unload on the vf, most likely due to this patch
doing sriov_disable() on PF flr, and 2 seconds later the PF driver sees that flr
and starts the recovery see below [1]

I think you are doing something that wrecks the VF pci access, where
the FW can't properly find the resource in the VF host memory and then
causes the domino effect...

>[  446.104036] mlx5_core 0000:01:00.2: mlx5_cmd_check:782:(pid 4328): DESTROY_QP(0x501) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x25b161)
>[  446.118092] mlx5_core 0000:01:00.2: mlx5_cmd_check:782:(pid 4328): DESTROY_CQ(0x401) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x1870ad)
>[  446.132028] ------------[ cut here ]------------
>[  446.136629] Destroy of kernel CQ shouldn't fail
>[  446.136648] WARNING: CPU: 37 PID: 4328 at drivers/infiniband/core/cq.c:345 ib_free_cq+0x16c/0x174
...

>[  448.363136] restrack: ------------[ cut here ]------------
>[  448.368601] infiniband mlx5_2: BUG: RESTRACK detected leak of resources
>[  448.375187] restrack: Kernel PD object allocated by mlx5_ib is not freed
>[  448.381861] restrack: Kernel PD object allocated by ib_core is not freed
>[  448.388534] restrack: Kernel PD object allocated by mlx5_ib is not freed
>[  448.395207] restrack: Kernel CQ object allocated by mlx5_ib is not freed
>[  448.401879] restrack: Kernel SRQ object allocated by mlx5_ib is not freed
>[  448.408638] restrack: Kernel SRQ object allocated by mlx5_ib is not freed
>[  448.415401] restrack: ------------[ cut here ]------------
>[  448.455025] mlx5_core 0000:01:00.0: poll_health:795:(pid 0): Fatal error 1 detected

PF driver detects the FLR here or at least some fatal error on the pci, 
but below you can clearly see the VF "mlx5_core 0000:01:00.2" is still
trying to unload, which means sriov_disable hasn't complete ! So why did
the PF FLR already before SRIOV is clearly disabled?
The only conclusion is some sort of error happening on the PCI due to the
change in behavior of sriov_disable(), which can explain the AER in the next
line :) 

>[  448.455107] pcieport 0000:00:00.0: AER: Corrected error received: 0000:01:00.0
>[  448.469914] mlx5_core 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Transaction Layer, (Receiver ID)
>[  448.479792] mlx5_core 0000:01:00.0:   device [15b3:1019] error status/mask=00002000/00000000
>[  448.488196] mlx5_core 0000:01:00.0:    [13] NonFatalErr
>[  448.494415] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:01:00.0
>[  448.502452] mlx5_core 0000:01:00.1: PCIe Bus Error: severity=Corrected, type=Transaction Layer, (Receiver ID)
>[  448.512324] mlx5_core 0000:01:00.1:   device [15b3:1019] error status/mask=00002000/00000000
>[  448.520726] mlx5_core 0000:01:00.1:    [13] NonFatalErr
>[  448.526951] pcieport 0000:00:00.0: AER: Corrected error received: 0000:01:00.0
>[  448.534176] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:01:00.0
>[  448.619235] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 8192 of flow group id 19

VF is still having hard time unloading due to the invalid QP above in the
first mlx5 "fail" log line

>[  448.630750] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 21 of ft 262149
>[  448.641277] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 20 of ft 262149
>[  448.651794] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 19 of ft 262149
>[  448.662309] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 18 of ft 262149
>[  448.672830] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 17 of ft 262149
>[  448.683417] mlx5_core 0000:01:00.2: update_root_ft_destroy:2127:(pid 4328): Update root flow table of id(262149) qpn(0) failed
>[  448.694843] mlx5_core 0000:01:00.2: del_hw_flow_table:507:(pid 4328): flow steering can't destroy ft
>[  448.703993] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 16 of ft 262148
>[  448.714516] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 15 of ft 262148
>[  448.725033] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 14 of ft 262148
>[  448.735564] mlx5_core 0000:01:00.2: del_hw_flow_table:507:(pid 4328): flow steering can't destroy ft
>[  448.744714] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 0 of flow group id 11
>[  448.755936] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 1 of flow group id 11
>[  448.767145] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 2 of flow group id 11
>[  448.778352] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 3 of flow group id 11
>[  448.789558] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 4 of flow group id 11
>[  448.800770] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 5 of flow group id 11
>[  448.812049] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 6 of flow group id 11
>[  448.823261] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 7 of flow group id 11
>[  448.834471] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 14 of flow group id 12
>[  448.845774] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 15 of flow group id 12
>[  448.857072] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 16 of flow group id 13
>[  448.868370] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 8 of flow group id 11
>[  448.879579] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 9 of flow group id 11
>[  448.890788] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 10 of flow group id 11
>[  448.902087] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 11 of flow group id 11
>[  448.913382] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 12 of flow group id 11
>[  448.924675] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 13 of flow group id 11
>[  448.935980] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 13 of ft 2
>[  448.946072] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 12 of ft 2
>[  448.956160] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 11 of ft 2
>[  448.966249] mlx5_core 0000:01:00.2: del_hw_flow_table:507:(pid 4328): flow steering can't destroy ft
>[  448.975395] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 0 of flow group id 8
>[  448.986526] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 1 of flow group id 8
>[  448.997647] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 2 of flow group id 8
>[  449.008768] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 3 of flow group id 8
>[  449.019890] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 4 of flow group id 8
>[  449.031013] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 5 of flow group id 8
>[  449.042135] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 6 of flow group id 8
>[  449.053257] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 7 of flow group id 8
>[  449.064380] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 8 of flow group id 9
>[...]
>
>
>> 	pcibios_sriov_disable(dev);
>>
>> 	if (iov->link != dev->devfn)
>> 		sysfs_remove_link(&dev->dev.kobj, "dep_link");
>>
>> 	iov->num_VFs = 0;
>>
>> 	if (!flr)
>> 		pci_iov_set_numvfs(dev, 0);
>> }
>>
>> Whether this is better, I leave to your evaluation.
>>
>> Thanks,
>> Lukasz
>>
>>> Did you test with or without my patch?
>>>
>>> Here is the result with my patch for the NVMe device in QEMU:
>>>
>>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -s 01:
>>> 01:00.0 Non-Volatile memory controller: Red Hat, Inc. Device 0010 (rev 02)
>>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>>>         Capabilities: [120 v1] Single Root I/O Virtualization (SR-IOV)
>>>                 IOVCap: Migration-, Interrupt Message Number: 000
>>>                 IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
>>>                 IOVSta: Migration-
>>>                 Initial VFs: 8, Total VFs: 8, Number of VFs: 0, Function Dependency Link: 00
>>>                 VF offset: 1, stride: 1, Device ID: 0010
>>>                 VF Migration: offset: 00000000, BIR: 0
>>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# echo 1 > sriov_numvfs
>>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>>>         Capabilities: [120 v1] Single Root I/O Virtualization (SR-IOV)
>>>                 IOVCap: Migration-, Interrupt Message Number: 000
>>>                 IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+
>>>                 IOVSta: Migration-
>>>                 Initial VFs: 8, Total VFs: 8, Number of VFs: 1, Function Dependency Link: 00
>>>                 VF offset: 1, stride: 1, Device ID: 0010
>>>                 VF Migration: offset: 00000000, BIR: 0
>>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# echo 1 > reset
>>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>>>         Capabilities: [120 v1] Single Root I/O Virtualization (SR-IOV)
>>>                 IOVCap: Migration-, Interrupt Message Number: 000
>>>                 IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+
>>>                 IOVSta: Migration-
>>>                 Initial VFs: 8, Total VFs: 8, Number of VFs: 0, Function Dependency Link: 00
>>>                 VF offset: 1, stride: 1, Device ID: 0010
>>>                 VF Migration: offset: 00000000, BIR: 0
>>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -xxx -s 01:00.0
>>> 01:00.0 Non-Volatile memory controller: Red Hat, Inc. Device 0010 (rev 02)
>>> 00: 36 1b 10 00 07 05 10 00 02 02 08 01 00 00 00 00
>>> 10: 04 00 80 fe 00 00 00 00 00 00 00 00 00 00 00 00
>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f4 1a 00 11
>>> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00
>>> 40: 11 80 40 80 00 20 00 00 00 30 00 00 00 00 00 00
>>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 60: 01 00 03 00 08 00 00 00 00 00 00 00 00 00 00 00
>>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 80: 10 60 02 00 00 80 00 10 00 00 00 00 11 04 00 00
>>> 90: 00 00 11 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> a0: 00 00 00 00 00 00 30 00 00 00 00 00 00 00 00 00
>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>
>>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# cat reset_method
>>> flr bus
>>>
>>>>
>>>> [root@localhost ~]# lspci  -s 01:
>>>> 01:00.0 Ethernet controller: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
>>>> 01:00.1 Ethernet controller: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
>>>> [root@localhost ~]# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>>>>         Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
>>>>                 IOVCap: Migration- 10BitTagReq- Interrupt Message Number: 000
>>>>                 IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+ 10BitTagReq-
>>>>                 IOVSta: Migration-
>>>>                 Initial VFs: 16, Total VFs: 16, Number of VFs: 0, Function Dependency Link: 00
>>>>                 VF offset: 2, stride: 1, Device ID: 101a
>>>>                 VF Migration: offset: 00000000, BIR: 0
>>>> [root@localhost 0000:01:00.0]# echo 1 > sriov_numvfs
>>>> [root@localhost ~]# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>>>>         Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
>>>>                 IOVCap: Migration- 10BitTagReq- Interrupt Message Number: 000
>>>>                 IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+ 10BitTagReq-
>>>>                 IOVSta: Migration-
>>>>                 Initial VFs: 16, Total VFs: 16, Number of VFs: 1, Function Dependency Link: 00
>>>>                 VF offset: 2, stride: 1, Device ID: 101a
>>>>                 VF Migration: offset: 00000000, BIR: 0
>>>> [root@localhost 0000:01:00.0]# echo 1 > reset
>>>> [root@localhost ~]# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>>>>         Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
>>>>                 IOVCap: Migration- 10BitTagReq- Interrupt Message Number: 000
>>>>                 IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+ 10BitTagReq-
>>>>                 IOVSta: Migration-
>>>>                 Initial VFs: 16, Total VFs: 16, Number of VFs: 1, Function Dependency Link: 00
>>>>                 VF offset: 2, stride: 1, Device ID: 101a
>>>>                 VF Migration: offset: 00000000, BIR: 0
>>>> [root@localhost ~]# lspci -xxx -s 01:00.0
>>>> 01:00.0 Ethernet controller: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
>>>> 00: b3 15 19 10 46 05 10 00 00 00 00 02 08 00 80 00
>>>> 10: 0c 00 00 00 00 08 00 00 00 00 00 00 00 00 00 00
>>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 b3 15 08 00
>>>> 30: 00 00 70 e6 60 00 00 00 00 00 00 00 ff 01 00 00
>>>> 40: 01 00 c3 81 08 00 00 00 03 9c cc 80 00 78 00 00
>>>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 01
>>>> 60: 10 48 02 00 e2 8f e0 11 5f 29 00 00 04 71 41 00
>>>> 70: 08 00 04 11 00 00 00 00 00 00 00 00 00 00 00 00
>>>> 80: 00 00 00 00 17 00 01 00 40 00 00 00 1e 00 80 01
>>>> 90: 04 00 1e 00 00 00 00 00 00 00 00 00 11 c0 3f 80
>>>> a0: 00 20 00 00 00 30 00 00 00 00 00 00 00 00 00 00
>>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>> c0: 09 40 18 00 0a 00 00 20 f0 1a 00 00 00 00 00 00
>>>> d0: 20 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
>>>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>> [root@localhost 0000:01:00.0]# cat reset_method
>>>> flr bus
>>>>
>>>> On 2022/1/19 10:47, Yicong Yang wrote:
>>>>> On 2022/1/19 0:30, Lukasz Maniak wrote:
>>>>>> On Tue, Jan 18, 2022 at 07:07:23PM +0800, Yicong Yang wrote:
>>>>>>> On 2022/1/18 6:55, Bjorn Helgaas wrote:
>>>>>>>> [+cc Alex in case he has comments on how FLR should work on
>>>>>>>> non-conforming hns3 devices]
>>>>>>>>
>>>>>>>> On Sat, Jan 15, 2022 at 05:22:19PM +0800, Yicong Yang wrote:
>>>>>>>>> On 2022/1/15 0:37, Bjorn Helgaas wrote:
>>>>>>>>>> On Fri, Jan 14, 2022 at 05:42:48PM +0800, Yicong Yang wrote:
>>>>>>>>>>> On 2022/1/14 0:45, Lukasz Maniak wrote:
>>>>>>>>>>>> On Wed, Jan 12, 2022 at 08:49:03AM -0600, Bjorn Helgaas wrote:
>>>>>>>>>>>>> On Wed, Dec 22, 2021 at 08:19:57PM +0100, Lukasz Maniak wrote:
>>>>>>>>>>>>>> As per PCI Express specification, FLR to a PF resets the PF state as
>>>>>>>>>>>>>> well as the SR-IOV extended capability including VF Enable which means
>>>>>>>>>>>>>> that VFs no longer exist.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Can you add a specific reference to the spec, please?
>>>>>>>>>>>>>
>>>>>>>>>>>> Following the Single Root I/O Virtualization and Sharing Specification:
>>>>>>>>>>>> 2.2.3. FLR That Targets a PF
>>>>>>>>>>>> PFs must support FLR.
>>>>>>>>>>>> FLR to a PF resets the PF state as well as the SR-IOV extended
>>>>>>>>>>>> capability including VF Enable which means that VFs no longer exist.
>>>>>>>>>>>>
>>>>>>>>>>>> For PCI Express Base Specification Revision 5.0 and later, this is
>>>>>>>>>>>> section 9.2.2.3.
>>>>>>>>>>
>>>>>>>>>> This is also the section in the new PCIe r6.0.  Let's use that.
>>>>>>>>>>
>>>>>>>>>>>>>> Currently, the IOV state is not updated during FLR, resulting in
>>>>>>>>>>>>>> non-compliant PCI driver behavior.
>>>>>>>>>>>>>
>>>>>>>>>>>>> And include a little detail about what problem is observed?  How would
>>>>>>>>>>>>> a user know this problem is occurring?
>>>>>>>>>>>>>
>>>>>>>>>>>> The problem is that the state of the kernel and HW as to the number of
>>>>>>>>>>>> VFs gets out of sync after FLR.
>>>>>>>>>>>>
>>>>>>>>>>>> This results in further listing, after the FLR is performed by the HW,
>>>>>>>>>>>> of VFs that actually no longer exist and should no longer be reported on
>>>>>>>>>>>> the PCI bus. lspci return FFs for these VFs.
>>>>>>>>>>>
>>>>>>>>>>> There're some exceptions. Take HiSilicon's hns3 and sec device as an
>>>>>>>>>>> example, the VF won't be destroyed after the FLR reset.
>>>>>>>>>>
>>>>>>>>>> If FLR on an hns3 PF does *not* clear VF Enable, and the VFs still
>>>>>>>>>> exist after FLR, isn't that a violation of sec 9.2.2.3?
>>>>>>>>>
>>>>>>>>> yes I think it's a violation to the spec.
>>>>>>>>
>>>>>>>> Thanks for confirming that.
>>>>>>>>
>>>>>>>>>> If hns3 and sec don't conform to the spec, we should have some sort of
>>>>>>>>>> quirk that serves to document and work around this.
>>>>>>>>>
>>>>>>>>> ok I think it'll help. Do you mean something like this based on this patch:
>>>>>>>>>
>>>>>>>>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
>>>>>>>>> index 69ee321027b4..0e4976c669b2 100644
>>>>>>>>> --- a/drivers/pci/iov.c
>>>>>>>>> +++ b/drivers/pci/iov.c
>>>>>>>>> @@ -1025,6 +1025,8 @@ void pci_reset_iov_state(struct pci_dev *dev)
>>>>>>>>>  		return;
>>>>>>>>>  	if (!iov->num_VFs)
>>>>>>>>>  		return;
>>>>>>>>> +	if (dev->flr_no_vf_reset)
>>>>>>>>> +		return;
>>>>>>>>>
>>>>>>>>>  	sriov_del_vfs(dev);
>>>>>>>>>
>>>>>>>>> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
>>>>>>>>> index 003950c738d2..c8ffcb0ac612 100644
>>>>>>>>> --- a/drivers/pci/quirks.c
>>>>>>>>> +++ b/drivers/pci/quirks.c
>>>>>>>>> @@ -1860,6 +1860,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa256, quirk_huawei_pcie_sva);
>>>>>>>>>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa258, quirk_huawei_pcie_sva);
>>>>>>>>>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa259, quirk_huawei_pcie_sva);
>>>>>>>>>
>>>>>>>>> +/*
>>>>>>>>> + * Some HiSilicon PCIe devices' VF won't be destroyed after a FLR reset.
>>>>>>>>> + * Don't reset these devices' IOV state when doing FLR.
>>>>>>>>> + */
>>>>>>>>> +static void quirk_huawei_pcie_flr(struct pci_dev *pdev)
>>>>>>>>> +{
>>>>>>>>> +	pdev->flr_no_vf_reset = 1;
>>>>>>>>> +}
>>>>>>>>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa255, quirk_huawei_pcie_flr);
>>>>>>>>> +/* ...some other devices have this quirk */
>>>>>>>>
>>>>>>>> Yes, I think something along this line will help.
>>>>>>>>
>>>>>>>>> diff --git a/include/linux/pci.h b/include/linux/pci.h
>>>>>>>>> index 18a75c8e615c..e62f9fa4d48f 100644
>>>>>>>>> --- a/include/linux/pci.h
>>>>>>>>> +++ b/include/linux/pci.h
>>>>>>>>> @@ -454,6 +454,7 @@ struct pci_dev {
>>>>>>>>>  	unsigned int	is_probed:1;		/* Device probing in progress */
>>>>>>>>>  	unsigned int	link_active_reporting:1;/* Device capable of reporting link active */
>>>>>>>>>  	unsigned int	no_vf_scan:1;		/* Don't scan for VFs after IOV enablement */
>>>>>>>>> +	unsigned int	flr_no_vf_reset:1;	/* VF won't be destroyed after PF's FLR */
>>>>>>>>>
>>>>>>>>>>> Currently the transactions with the VF will be restored after the
>>>>>>>>>>> FLR. But this patch will break that, the VF is fully disabled and
>>>>>>>>>>> the transaction cannot be restored. User needs to reconfigure it,
>>>>>>>>>>> which is unnecessary before this patch.
>>>>>>>>>>
>>>>>>>>>> What does it mean for a "transaction to be restored"?  Maybe you mean
>>>>>>>>>> this patch removes the *VFs* via sriov_del_vfs(), and whoever
>>>>>>>>>> initiated the FLR would need to re-enable VFs via pci_enable_sriov()
>>>>>>>>>> or something similar?
>>>>>>>>>
>>>>>>>>> Partly. It'll also terminate the VF users.
>>>>>>>>> Think that I attach the VF of hns to a VM by vfio and ping the network
>>>>>>>>> in the VM, when doing FLR the 'ping' will pause and after FLR it'll
>>>>>>>>> resume. Currenlty The driver handle this in the ->reset_{prepare, done}()
>>>>>>>>> methods. The user of VM may not realize there is a FLR of the PF as the
>>>>>>>>> VF always exists and the 'ping' is never terminated.
>>>>>>>>>
>>>>>>>>> If we remove the VF when doing FLR, then 1) we'll block in the VF->remove()
>>>>>>>>> until no one is using the device, for example the 'ping' is finished.
>>>>>>>>> 2) the VF in the VM no longer exists and we have to re-enable VF and hotplug
>>>>>>>>> it into the VM and restart the ping. That's a big difference.
>>>>>>>>>
>>>>>>>>>> If FLR disables VFs, it seems like we should expect to have to
>>>>>>>>>> re-enable them if we want them.
>>>>>>>>>
>>>>>>>>> It involves a remove()/probe() process of the VF driver and the user
>>>>>>>>> of the VF will be terminated, just like the situation illustrated
>>>>>>>>> above.
>>>>>>>>
>>>>>>>> I think users of FLR should be able to rely on it working per spec,
>>>>>>>> i.e., that VFs will be destroyed.  If hardware like hns3 doesn't do
>>>>>>>> that, the quirk should work around that in software by doing it
>>>>>>>> explicitly.
>>>>>>>>
>>>>>>>> I don't think the non-standard behavior should be exposed to the
>>>>>>>> users.  The user should not have to know about this hns3 issue.
>>>>>>>>
>>>>>>>> If FLR on a standard NIC terminates a ping on a VF, FLR on an hns3 NIC
>>>>>>>> should also terminate a ping on a VF.
>>>>>>>>
>>>>>>>
>>>>>>> ok thanks for the discussion, agree on that. According to the spec, after
>>>>>>> the FLR to the PF the VF does not exist anymore, so the ping will be terminated.
>>>>>>> Our hns3 and sec team are still evaluating it before coming to a solution of
>>>>>>> whether using a quirk or comform to the spec.
>>>>>>>
>>>>>>> For this patch it looks reasonable to me, but some questions about the code below.
>>>>>>>
>>>>>>>>>>> Can we handle this problem in another way? Maybe test the VF's
>>>>>>>>>>> vendor device ID after the FLR reset to see whether it has really
>>>>>>>>>>> gone or not?
>>>>>>>>>>>
>>>>>>>>>>>> sriov_numvfs in sysfs returns old invalid value and does not allow
>>>>>>>>>>>> setting a new value before explicitly setting 0 in the first place.
>>>>>>>>>>>>
>>>>>>>>>>>>>> This patch introduces a simple function, called on the FLR path, that
>>>>>>>>>>>>>> removes the virtual function devices from the PCI bus and their
>>>>>>>>>>>>>> corresponding sysfs links with a final clear of the num_vfs value in IOV
>>>>>>>>>>>>>> state.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
>>>>>>>>>>>>>> ---
>>>>>>>>>>>>>>  drivers/pci/iov.c | 21 +++++++++++++++++++++
>>>>>>>>>>>>>>  drivers/pci/pci.c |  2 ++
>>>>>>>>>>>>>>  drivers/pci/pci.h |  4 ++++
>>>>>>>>>>>>>>  3 files changed, 27 insertions(+)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
>>>>>>>>>>>>>> index 0267977c9f17..69ee321027b4 100644
>>>>>>>>>>>>>> --- a/drivers/pci/iov.c
>>>>>>>>>>>>>> +++ b/drivers/pci/iov.c
>>>>>>>>>>>>>> @@ -1013,6 +1013,27 @@ int pci_iov_bus_range(struct pci_bus *bus)
>>>>>>>>>>>>>>  	return max ? max - bus->number : 0;
>>>>>>>>>>>>>>  }
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> +/**
>>>>>>>>>>>>>> + * pci_reset_iov_state - reset the state of the IOV capability
>>>>>>>>>>>>>> + * @dev: the PCI device
>>>>>>>>>>>>>> + */
>>>>>>>>>>>>>> +void pci_reset_iov_state(struct pci_dev *dev)
>>>>>>>>>>>>>> +{
>>>>>>>>>>>>>> +	struct pci_sriov *iov = dev->sriov;
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +	if (!dev->is_physfn)
>>>>>>>>>>>>>> +		return;
>>>>>>>>>>>>>> +	if (!iov->num_VFs)
>>>>>>>>>>>>>> +		return;
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +	sriov_del_vfs(dev);
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +	if (iov->link != dev->devfn)
>>>>>>>>>>>>>> +		sysfs_remove_link(&dev->dev.kobj, "dep_link");
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +	iov->num_VFs = 0;
>>>>>>>>>>>>>> +}
>>>>>>>>>>>>>> +
>>>>>>>
>>>>>>> Any reason for not using pci_disable_sriov()?
>>>>>>
>>>>>> The issue with pci_disable_sriov() is that it calls sriov_disable(),
>>>>>> which directly uses pci_cfg_access_lock(), leading to deadlock on the
>>>>>> FLR path.
>>>>>>
>>>>>
>>>>> That'll be a problem. Well my main concern is whether the VFs will be reset
>>>>> correctly through pci_reset_iov_state() as it lacks the participant of
>>>>> PF driver and bios (seems may needed only on powerpc, not sure), which is
>>>>> necessary in the enable/disable routine through $pci_dev/sriov_numvfs.
>>>>>
>>>>>>>
>>>>>>> With the spec the related registers in the SRIOV cap will be reset so
>>>>>>> it's ok in general. But for some devices not following the spec like hns3,
>>>>>>> some fields like VF enable won't be reset and keep enabled after the FLR.
>>>>>>> In this case after the FLR the VF devices in the system has gone but
>>>>>>> the state of the PF SRIOV cap leaves uncleared. pci_disable_sriov()
>>>>>>> will reset the whole SRIOV cap. It'll also call pcibios_sriov_disable()
>>>>>>> to correct handle the VF disabling on some platforms, IIUC.
>>>>>>>
>>>>>>> Or is it better to use pdev->driver->sriov_configure(pdev,0)?
>>>>>>> PF drivers must implement ->sriov_configure() for enabling/disabling
>>>>>>> the VF but we totally skip the PF driver here.
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Yicong
>>>>>>>
>>>>>>>>>>>>>>  /**
>>>>>>>>>>>>>>   * pci_enable_sriov - enable the SR-IOV capability
>>>>>>>>>>>>>>   * @dev: the PCI device
>>>>>>>>>>>>>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>>>>>>>>>>>>>> index 3d2fb394986a..535f19d37e8d 100644
>>>>>>>>>>>>>> --- a/drivers/pci/pci.c
>>>>>>>>>>>>>> +++ b/drivers/pci/pci.c
>>>>>>>>>>>>>> @@ -4694,6 +4694,8 @@ EXPORT_SYMBOL(pci_wait_for_pending_transaction);
>>>>>>>>>>>>>>   */
>>>>>>>>>>>>>>  int pcie_flr(struct pci_dev *dev)
>>>>>>>>>>>>>>  {
>>>>>>>>>>>>>> +	pci_reset_iov_state(dev);
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>>  	if (!pci_wait_for_pending_transaction(dev))
>>>>>>>>>>>>>>  		pci_err(dev, "timed out waiting for pending transaction; performing function level reset anyway\n");
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
>>>>>>>>>>>>>> index 3d60cabde1a1..7bb144fbec76 100644
>>>>>>>>>>>>>> --- a/drivers/pci/pci.h
>>>>>>>>>>>>>> +++ b/drivers/pci/pci.h
>>>>>>>>>>>>>> @@ -480,6 +480,7 @@ void pci_iov_update_resource(struct pci_dev *dev, int resno);
>>>>>>>>>>>>>>  resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
>>>>>>>>>>>>>>  void pci_restore_iov_state(struct pci_dev *dev);
>>>>>>>>>>>>>>  int pci_iov_bus_range(struct pci_bus *bus);
>>>>>>>>>>>>>> +void pci_reset_iov_state(struct pci_dev *dev);
>>>>>>>>>>>>>>  extern const struct attribute_group sriov_pf_dev_attr_group;
>>>>>>>>>>>>>>  extern const struct attribute_group sriov_vf_dev_attr_group;
>>>>>>>>>>>>>>  #else
>>>>>>>>>>>>>> @@ -501,6 +502,9 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
>>>>>>>>>>>>>>  {
>>>>>>>>>>>>>>  	return 0;
>>>>>>>>>>>>>>  }
>>>>>>>>>>>>>> +static inline void pci_reset_iov_state(struct pci_dev *dev)
>>>>>>>>>>>>>> +{
>>>>>>>>>>>>>> +}
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  #endif /* CONFIG_PCI_IOV */
>>>>>>>> .
>>>>>>>>
>>>>>> .
>>>>>>
>>>>> .
>>>>>
>> .
>>

Re: [PATCH] PCI: Reset IOV state on FLR to PF

[Yicong Yang]

On 2022/1/22 5:40, Saeed Mahameed wrote:
> On 20 Jan 21:16, Yicong Yang wrote:
>> On 2022/1/20 1:09, Lukasz Maniak wrote:
>>> On Wed, Jan 19, 2022 at 05:06:55PM +0100, Lukasz Maniak wrote:
>>>> On Wed, Jan 19, 2022 at 06:22:07PM +0800, Yicong Yang wrote:
>>>>> Hi Lukasz, Bjorn,
>>>>>
>>>>> FYI, I tested with Mellanox CX-5, the VF also exists after FLR. Here's the operation:
>>>>
>>>
>>> Please disregard my previous email. I missed your point.
>>> I take it that the Mellanox CX-5 also violates the spec.
>>>
>>> As for using pci_disable_sriov() I did a test to get a backtrace for
>>> deadlock:
>>> [  846.904248] Call Trace:
>>> [  846.904251]  <TASK>
>>> [  846.904272]  __schedule+0x302/0x950
>>> [  846.904282]  schedule+0x58/0xd0
>>> [  846.904286]  pci_wait_cfg+0x63/0xb0
>>> [  846.904290]  ? wait_woken+0x70/0x70
>>> [  846.904296]  pci_cfg_access_lock+0x48/0x50
>>> [  846.904300]  sriov_disable+0x4d/0xf0
>>> [  846.904306]  pci_disable_sriov+0x26/0x30
>>> [  846.904310]  pcie_flr+0x2b/0x100
>>> [  846.904317]  pcie_reset_flr+0x25/0x30
>>> [  846.904322]  __pci_reset_function_locked+0x42/0x60
>>> [  846.904327]  pci_reset_function+0x40/0x70
>>> [  846.904334]  reset_store+0x5c/0xa0
>>> [  846.904347]  dev_attr_store+0x17/0x30
>>> [  846.904357]  sysfs_kf_write+0x3f/0x50
>>> [  846.904365]  kernfs_fop_write_iter+0x13b/0x1d0
>>> [  846.904371]  new_sync_write+0x117/0x1b0
>>> [  846.904379]  vfs_write+0x219/0x2b0
>>> [  846.904384]  ksys_write+0x67/0xe0
>>> [  846.904390]  __x64_sys_write+0x1a/0x20
>>> [  846.904395]  do_syscall_64+0x5c/0xc0
>>> [  846.904401]  ? debug_smp_processor_id+0x17/0x20
>>> [  846.904406]  ? fpregs_assert_state_consistent+0x26/0x50
>>> [  846.904413]  ? exit_to_user_mode_prepare+0x3f/0x1b0
>>> [  846.904418]  ? irqentry_exit_to_user_mode+0x9/0x20
>>> [  846.904423]  ? irqentry_exit+0x33/0x40
>>> [  846.904427]  ? exc_page_fault+0x89/0x180
>>> [  846.904431]  ? asm_exc_page_fault+0x8/0x30
>>> [  846.904438]  entry_SYSCALL_64_after_hwframe+0x44/0xae
>>>
>>> As can be noticed during FLR we are already on a locked path for the
>>> device in __pci_reset_function_locked(). In addition, the device will reset
>>> the BARs during FLR on its own.
>>>
>>> If we still would like to use pci_disable_sriov() for this purpose we
>>> need to pass a flag to sriov_disable() and use conditionally twice. It
>>> would look something like this:
>>>
>>> static void sriov_disable(struct pci_dev *dev, bool flr)
>>> {
>>>     struct pci_sriov *iov = dev->sriov;
>>>
>>>     if (!iov->num_VFs)
>>>         return;
>>>
>>>     sriov_del_vfs(dev);
>>>
>>>     if (!flr) {
>>>         iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
>>>         pci_cfg_access_lock(dev);
>>>         pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
>>>         ssleep(1);
>>>         pci_cfg_access_unlock(dev);
>>>     }
>>>
>>
>> It still leaves the VFE uncleared. So after reset the hardware IOV state is unsynchronized
>> with the system as we've removed the VFs already. so you may need:
>>
>> static void sriov_disable(struct pci_dev *dev, bool locked)
>> {
>>     struct pci_sriov *iov = dev->sriov;
>>
>>     if (!iov->num_VFs)
>>         return;
>>
>>     sriov_del_vfs(dev);
>>
>>     iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
>>     if (!locked)
>>         pci_cfg_access_lock(dev);
>>     pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
>>     ssleep(1);
>>     if (!locked)
>>         pci_cfg_access_unlock(dev);
>>
>>     pcibios_sriov_disable(dev);
>>
>>     if (iov->link != dev->devfn)
>>         sysfs_remove_link(&dev->dev.kobj, "dep_link");
>>
>>     iov->num_VFs = 0;
>>
>>     if (!flr)
>>         pci_iov_set_numvfs(dev, 0);
>> }
>>
>> I'm not sure this is correct as we disable VF not through PF driver
>> and whether these PF driver involed need to modified after this
>> change.
>> (Yes through pdev->driver->sriov_configure() we'll also meet the
>> deadlock problem but that's the next step question).
>>
>> With your patch based on 5.16 release when doing FLR reset on VF's PF
>> of Mellanox CX-5, the log says that there's a resource leakage and
>> leads to several calltraces. I paste the log below.
>>
>> Perhaps Mellanox maintainers could help on this.
>>
>> Thanks.
>>
>> [  435.211235] mlx5_core 0000:01:00.0: E-Switch: Enable: mode(LEGACY), nvfs(1), active vports(2)
>> [  435.327158] pci 0000:01:00.2: [15b3:101a] type 00 class 0x020000
>> [  435.333197] pci 0000:01:00.2: enabling Extended Tags
>> [  435.338936] pci 0000:01:00.2: calling  mellanox_check_broken_intx_masking+0x0/0x1a0 @ 4328
>> [  435.347174] pci 0000:01:00.2: mellanox_check_broken_intx_masking+0x0/0x1a0 took 0 usecs
>> [  435.355224] mlx5_core 0000:01:00.2: Adding to iommu group 49
>> [  435.361639] mlx5_core 0000:01:00.2: enabling device (0000 -> 0002)
>> [  435.367917] mlx5_core 0000:01:00.2: firmware version: 16.27.1016
>> [  435.611252] mlx5_core 0000:01:00.2: Rate limit: 127 rates are supported, range: 0Mbps to 97656Mbps
>> [  435.628931] mlx5_core 0000:01:00.2: Assigned random MAC address 72:51:df:ba:6a:1e
>> [  435.636824] mlx5_core 0000:01:00.2: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>> [  435.744665] mlx5_core 0000:01:00.2: Supported tc offload range - chains: 1, prios: 1
>> [  446.080370] mlx5_core 0000:01:00.2: mlx5_cmd_check:782:(pid 4328): 2RST_QP(0x50a) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x7ea02d)
>> [  446.094054] infiniband mlx5_2: destroy_qp_common:2599:(pid 4328): mlx5_ib: modify QP 0x000504 to RESET failed
> 
> 
> BAD_RES_STATE       | 0x7EA02D |  2error_qp/2reset: invalid qp number.
> This is the source of the resource leak, all others are failing as side
> effect to this.
> 
> This is due to mlx5_ib trying to unload on the vf, most likely due to this patch
> doing sriov_disable() on PF flr, and 2 seconds later the PF driver sees that flr
> and starts the recovery see below [1]
> 
> I think you are doing something that wrecks the VF pci access, where
> the FW can't properly find the resource in the VF host memory and then
> causes the domino effect...
> 

Thanks for the analysis and sorry for the late reply.

My test is rather simple.

echo 1 > sriov_numvfs # enable 1 VF
echo 1 > reset # trigger FLR

Both PFs' net are down and VF is not used.

>> [  446.104036] mlx5_core 0000:01:00.2: mlx5_cmd_check:782:(pid 4328): DESTROY_QP(0x501) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x25b161)
>> [  446.118092] mlx5_core 0000:01:00.2: mlx5_cmd_check:782:(pid 4328): DESTROY_CQ(0x401) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x1870ad)
>> [  446.132028] ------------[ cut here ]------------
>> [  446.136629] Destroy of kernel CQ shouldn't fail
>> [  446.136648] WARNING: CPU: 37 PID: 4328 at drivers/infiniband/core/cq.c:345 ib_free_cq+0x16c/0x174
> ...
> 
>> [  448.363136] restrack: ------------[ cut here ]------------
>> [  448.368601] infiniband mlx5_2: BUG: RESTRACK detected leak of resources
>> [  448.375187] restrack: Kernel PD object allocated by mlx5_ib is not freed
>> [  448.381861] restrack: Kernel PD object allocated by ib_core is not freed
>> [  448.388534] restrack: Kernel PD object allocated by mlx5_ib is not freed
>> [  448.395207] restrack: Kernel CQ object allocated by mlx5_ib is not freed
>> [  448.401879] restrack: Kernel SRQ object allocated by mlx5_ib is not freed
>> [  448.408638] restrack: Kernel SRQ object allocated by mlx5_ib is not freed
>> [  448.415401] restrack: ------------[ cut here ]------------
>> [  448.455025] mlx5_core 0000:01:00.0: poll_health:795:(pid 0): Fatal error 1 detected
> 
> PF driver detects the FLR here or at least some fatal error on the pci, but below you can clearly see the VF "mlx5_core 0000:01:00.2" is still
> trying to unload, which means sriov_disable hasn't complete ! So why did
> the PF FLR already before SRIOV is clearly disabled?
> The only conclusion is some sort of error happening on the PCI due to the
> change in behavior of sriov_disable(), which can explain the AER in the next
> line :)

Not sure. I tested again once the machine booted up, but with the same result.
Maybe I need to check whether the PCI link is ok.

Focus on this patch, does PF driver of mellanox needs to do something in the VF destroying?
The PF driver may not realized the VF is going to destroy as we're not destroying VF through
PF's ->sriov_configure() callback.

BTW, the mellanox doesn't reset IOV state either on a FLR resetting, is it intended as a feature?

Thanks,
Yicong

>> [  448.455107] pcieport 0000:00:00.0: AER: Corrected error received: 0000:01:00.0
>> [  448.469914] mlx5_core 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Transaction Layer, (Receiver ID)
>> [  448.479792] mlx5_core 0000:01:00.0:   device [15b3:1019] error status/mask=00002000/00000000
>> [  448.488196] mlx5_core 0000:01:00.0:    [13] NonFatalErr
>> [  448.494415] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:01:00.0
>> [  448.502452] mlx5_core 0000:01:00.1: PCIe Bus Error: severity=Corrected, type=Transaction Layer, (Receiver ID)
>> [  448.512324] mlx5_core 0000:01:00.1:   device [15b3:1019] error status/mask=00002000/00000000
>> [  448.520726] mlx5_core 0000:01:00.1:    [13] NonFatalErr
>> [  448.526951] pcieport 0000:00:00.0: AER: Corrected error received: 0000:01:00.0
>> [  448.534176] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:01:00.0
>> [  448.619235] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 8192 of flow group id 19
> 
> VF is still having hard time unloading due to the invalid QP above in the
> first mlx5 "fail" log line
> 
>> [  448.630750] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 21 of ft 262149
>> [  448.641277] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 20 of ft 262149
>> [  448.651794] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 19 of ft 262149
>> [  448.662309] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 18 of ft 262149
>> [  448.672830] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 17 of ft 262149
>> [  448.683417] mlx5_core 0000:01:00.2: update_root_ft_destroy:2127:(pid 4328): Update root flow table of id(262149) qpn(0) failed
>> [  448.694843] mlx5_core 0000:01:00.2: del_hw_flow_table:507:(pid 4328): flow steering can't destroy ft
>> [  448.703993] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 16 of ft 262148
>> [  448.714516] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 15 of ft 262148
>> [  448.725033] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 14 of ft 262148
>> [  448.735564] mlx5_core 0000:01:00.2: del_hw_flow_table:507:(pid 4328): flow steering can't destroy ft
>> [  448.744714] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 0 of flow group id 11
>> [  448.755936] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 1 of flow group id 11
>> [  448.767145] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 2 of flow group id 11
>> [  448.778352] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 3 of flow group id 11
>> [  448.789558] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 4 of flow group id 11
>> [  448.800770] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 5 of flow group id 11
>> [  448.812049] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 6 of flow group id 11
>> [  448.823261] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 7 of flow group id 11
>> [  448.834471] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 14 of flow group id 12
>> [  448.845774] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 15 of flow group id 12
>> [  448.857072] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 16 of flow group id 13
>> [  448.868370] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 8 of flow group id 11
>> [  448.879579] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 9 of flow group id 11
>> [  448.890788] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 10 of flow group id 11
>> [  448.902087] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 11 of flow group id 11
>> [  448.913382] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 12 of flow group id 11
>> [  448.924675] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 13 of flow group id 11
>> [  448.935980] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 13 of ft 2
>> [  448.946072] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 12 of ft 2
>> [  448.956160] mlx5_core 0000:01:00.2: del_hw_flow_group:644:(pid 4328): flow steering can't destroy fg 11 of ft 2
>> [  448.966249] mlx5_core 0000:01:00.2: del_hw_flow_table:507:(pid 4328): flow steering can't destroy ft
>> [  448.975395] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 0 of flow group id 8
>> [  448.986526] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 1 of flow group id 8
>> [  448.997647] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 2 of flow group id 8
>> [  449.008768] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 3 of flow group id 8
>> [  449.019890] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 4 of flow group id 8
>> [  449.031013] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 5 of flow group id 8
>> [  449.042135] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 6 of flow group id 8
>> [  449.053257] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 7 of flow group id 8
>> [  449.064380] mlx5_core 0000:01:00.2: del_hw_fte:605:(pid 4328): flow steering can't delete fte in index 8 of flow group id 9
>> [...]
>>
>>
>>>     pcibios_sriov_disable(dev);
>>>
>>>     if (iov->link != dev->devfn)
>>>         sysfs_remove_link(&dev->dev.kobj, "dep_link");
>>>
>>>     iov->num_VFs = 0;
>>>
>>>     if (!flr)
>>>         pci_iov_set_numvfs(dev, 0);
>>> }
>>>
>>> Whether this is better, I leave to your evaluation.
>>>
>>> Thanks,
>>> Lukasz
>>>
>>>> Did you test with or without my patch?
>>>>
>>>> Here is the result with my patch for the NVMe device in QEMU:
>>>>
>>>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -s 01:
>>>> 01:00.0 Non-Volatile memory controller: Red Hat, Inc. Device 0010 (rev 02)
>>>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>>>>         Capabilities: [120 v1] Single Root I/O Virtualization (SR-IOV)
>>>>                 IOVCap: Migration-, Interrupt Message Number: 000
>>>>                 IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
>>>>                 IOVSta: Migration-
>>>>                 Initial VFs: 8, Total VFs: 8, Number of VFs: 0, Function Dependency Link: 00
>>>>                 VF offset: 1, stride: 1, Device ID: 0010
>>>>                 VF Migration: offset: 00000000, BIR: 0
>>>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# echo 1 > sriov_numvfs
>>>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>>>>         Capabilities: [120 v1] Single Root I/O Virtualization (SR-IOV)
>>>>                 IOVCap: Migration-, Interrupt Message Number: 000
>>>>                 IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+
>>>>                 IOVSta: Migration-
>>>>                 Initial VFs: 8, Total VFs: 8, Number of VFs: 1, Function Dependency Link: 00
>>>>                 VF offset: 1, stride: 1, Device ID: 0010
>>>>                 VF Migration: offset: 00000000, BIR: 0
>>>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# echo 1 > reset
>>>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>>>>         Capabilities: [120 v1] Single Root I/O Virtualization (SR-IOV)
>>>>                 IOVCap: Migration-, Interrupt Message Number: 000
>>>>                 IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+
>>>>                 IOVSta: Migration-
>>>>                 Initial VFs: 8, Total VFs: 8, Number of VFs: 0, Function Dependency Link: 00
>>>>                 VF offset: 1, stride: 1, Device ID: 0010
>>>>                 VF Migration: offset: 00000000, BIR: 0
>>>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# lspci -xxx -s 01:00.0
>>>> 01:00.0 Non-Volatile memory controller: Red Hat, Inc. Device 0010 (rev 02)
>>>> 00: 36 1b 10 00 07 05 10 00 02 02 08 01 00 00 00 00
>>>> 10: 04 00 80 fe 00 00 00 00 00 00 00 00 00 00 00 00
>>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f4 1a 00 11
>>>> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00
>>>> 40: 11 80 40 80 00 20 00 00 00 30 00 00 00 00 00 00
>>>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>> 60: 01 00 03 00 08 00 00 00 00 00 00 00 00 00 00 00
>>>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>> 80: 10 60 02 00 00 80 00 10 00 00 00 00 11 04 00 00
>>>> 90: 00 00 11 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>> a0: 00 00 00 00 00 00 30 00 00 00 00 00 00 00 00 00
>>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>>
>>>> root@qemu-sriov:/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0# cat reset_method
>>>> flr bus
>>>>
>>>>>
>>>>> [root@localhost ~]# lspci  -s 01:
>>>>> 01:00.0 Ethernet controller: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
>>>>> 01:00.1 Ethernet controller: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
>>>>> [root@localhost ~]# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>>>>>         Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
>>>>>                 IOVCap: Migration- 10BitTagReq- Interrupt Message Number: 000
>>>>>                 IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+ 10BitTagReq-
>>>>>                 IOVSta: Migration-
>>>>>                 Initial VFs: 16, Total VFs: 16, Number of VFs: 0, Function Dependency Link: 00
>>>>>                 VF offset: 2, stride: 1, Device ID: 101a
>>>>>                 VF Migration: offset: 00000000, BIR: 0
>>>>> [root@localhost 0000:01:00.0]# echo 1 > sriov_numvfs
>>>>> [root@localhost ~]# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>>>>>         Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
>>>>>                 IOVCap: Migration- 10BitTagReq- Interrupt Message Number: 000
>>>>>                 IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+ 10BitTagReq-
>>>>>                 IOVSta: Migration-
>>>>>                 Initial VFs: 16, Total VFs: 16, Number of VFs: 1, Function Dependency Link: 00
>>>>>                 VF offset: 2, stride: 1, Device ID: 101a
>>>>>                 VF Migration: offset: 00000000, BIR: 0
>>>>> [root@localhost 0000:01:00.0]# echo 1 > reset
>>>>> [root@localhost ~]# lspci -vvv -s 01:00.0 | egrep "IOV|VF"
>>>>>         Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
>>>>>                 IOVCap: Migration- 10BitTagReq- Interrupt Message Number: 000
>>>>>                 IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+ 10BitTagReq-
>>>>>                 IOVSta: Migration-
>>>>>                 Initial VFs: 16, Total VFs: 16, Number of VFs: 1, Function Dependency Link: 00
>>>>>                 VF offset: 2, stride: 1, Device ID: 101a
>>>>>                 VF Migration: offset: 00000000, BIR: 0
>>>>> [root@localhost ~]# lspci -xxx -s 01:00.0
>>>>> 01:00.0 Ethernet controller: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
>>>>> 00: b3 15 19 10 46 05 10 00 00 00 00 02 08 00 80 00
>>>>> 10: 0c 00 00 00 00 08 00 00 00 00 00 00 00 00 00 00
>>>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 b3 15 08 00
>>>>> 30: 00 00 70 e6 60 00 00 00 00 00 00 00 ff 01 00 00
>>>>> 40: 01 00 c3 81 08 00 00 00 03 9c cc 80 00 78 00 00
>>>>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 01
>>>>> 60: 10 48 02 00 e2 8f e0 11 5f 29 00 00 04 71 41 00
>>>>> 70: 08 00 04 11 00 00 00 00 00 00 00 00 00 00 00 00
>>>>> 80: 00 00 00 00 17 00 01 00 40 00 00 00 1e 00 80 01
>>>>> 90: 04 00 1e 00 00 00 00 00 00 00 00 00 11 c0 3f 80
>>>>> a0: 00 20 00 00 00 30 00 00 00 00 00 00 00 00 00 00
>>>>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>>> c0: 09 40 18 00 0a 00 00 20 f0 1a 00 00 00 00 00 00
>>>>> d0: 20 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
>>>>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>>> [root@localhost 0000:01:00.0]# cat reset_method
>>>>> flr bus
>>>>>
>>>>> On 2022/1/19 10:47, Yicong Yang wrote:
>>>>>> On 2022/1/19 0:30, Lukasz Maniak wrote:
>>>>>>> On Tue, Jan 18, 2022 at 07:07:23PM +0800, Yicong Yang wrote:
>>>>>>>> On 2022/1/18 6:55, Bjorn Helgaas wrote:
>>>>>>>>> [+cc Alex in case he has comments on how FLR should work on
>>>>>>>>> non-conforming hns3 devices]
>>>>>>>>>
>>>>>>>>> On Sat, Jan 15, 2022 at 05:22:19PM +0800, Yicong Yang wrote:
>>>>>>>>>> On 2022/1/15 0:37, Bjorn Helgaas wrote:
>>>>>>>>>>> On Fri, Jan 14, 2022 at 05:42:48PM +0800, Yicong Yang wrote:
>>>>>>>>>>>> On 2022/1/14 0:45, Lukasz Maniak wrote:
>>>>>>>>>>>>> On Wed, Jan 12, 2022 at 08:49:03AM -0600, Bjorn Helgaas wrote:
>>>>>>>>>>>>>> On Wed, Dec 22, 2021 at 08:19:57PM +0100, Lukasz Maniak wrote:
>>>>>>>>>>>>>>> As per PCI Express specification, FLR to a PF resets the PF state as
>>>>>>>>>>>>>>> well as the SR-IOV extended capability including VF Enable which means
>>>>>>>>>>>>>>> that VFs no longer exist.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Can you add a specific reference to the spec, please?
>>>>>>>>>>>>>>
>>>>>>>>>>>>> Following the Single Root I/O Virtualization and Sharing Specification:
>>>>>>>>>>>>> 2.2.3. FLR That Targets a PF
>>>>>>>>>>>>> PFs must support FLR.
>>>>>>>>>>>>> FLR to a PF resets the PF state as well as the SR-IOV extended
>>>>>>>>>>>>> capability including VF Enable which means that VFs no longer exist.
>>>>>>>>>>>>>
>>>>>>>>>>>>> For PCI Express Base Specification Revision 5.0 and later, this is
>>>>>>>>>>>>> section 9.2.2.3.
>>>>>>>>>>>
>>>>>>>>>>> This is also the section in the new PCIe r6.0.  Let's use that.
>>>>>>>>>>>
>>>>>>>>>>>>>>> Currently, the IOV state is not updated during FLR, resulting in
>>>>>>>>>>>>>>> non-compliant PCI driver behavior.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> And include a little detail about what problem is observed?  How would
>>>>>>>>>>>>>> a user know this problem is occurring?
>>>>>>>>>>>>>>
>>>>>>>>>>>>> The problem is that the state of the kernel and HW as to the number of
>>>>>>>>>>>>> VFs gets out of sync after FLR.
>>>>>>>>>>>>>
>>>>>>>>>>>>> This results in further listing, after the FLR is performed by the HW,
>>>>>>>>>>>>> of VFs that actually no longer exist and should no longer be reported on
>>>>>>>>>>>>> the PCI bus. lspci return FFs for these VFs.
>>>>>>>>>>>>
>>>>>>>>>>>> There're some exceptions. Take HiSilicon's hns3 and sec device as an
>>>>>>>>>>>> example, the VF won't be destroyed after the FLR reset.
>>>>>>>>>>>
>>>>>>>>>>> If FLR on an hns3 PF does *not* clear VF Enable, and the VFs still
>>>>>>>>>>> exist after FLR, isn't that a violation of sec 9.2.2.3?
>>>>>>>>>>
>>>>>>>>>> yes I think it's a violation to the spec.
>>>>>>>>>
>>>>>>>>> Thanks for confirming that.
>>>>>>>>>
>>>>>>>>>>> If hns3 and sec don't conform to the spec, we should have some sort of
>>>>>>>>>>> quirk that serves to document and work around this.
>>>>>>>>>>
>>>>>>>>>> ok I think it'll help. Do you mean something like this based on this patch:
>>>>>>>>>>
>>>>>>>>>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
>>>>>>>>>> index 69ee321027b4..0e4976c669b2 100644
>>>>>>>>>> --- a/drivers/pci/iov.c
>>>>>>>>>> +++ b/drivers/pci/iov.c
>>>>>>>>>> @@ -1025,6 +1025,8 @@ void pci_reset_iov_state(struct pci_dev *dev)
>>>>>>>>>>          return;
>>>>>>>>>>      if (!iov->num_VFs)
>>>>>>>>>>          return;
>>>>>>>>>> +    if (dev->flr_no_vf_reset)
>>>>>>>>>> +        return;
>>>>>>>>>>
>>>>>>>>>>      sriov_del_vfs(dev);
>>>>>>>>>>
>>>>>>>>>> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
>>>>>>>>>> index 003950c738d2..c8ffcb0ac612 100644
>>>>>>>>>> --- a/drivers/pci/quirks.c
>>>>>>>>>> +++ b/drivers/pci/quirks.c
>>>>>>>>>> @@ -1860,6 +1860,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa256, quirk_huawei_pcie_sva);
>>>>>>>>>>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa258, quirk_huawei_pcie_sva);
>>>>>>>>>>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa259, quirk_huawei_pcie_sva);
>>>>>>>>>>
>>>>>>>>>> +/*
>>>>>>>>>> + * Some HiSilicon PCIe devices' VF won't be destroyed after a FLR reset.
>>>>>>>>>> + * Don't reset these devices' IOV state when doing FLR.
>>>>>>>>>> + */
>>>>>>>>>> +static void quirk_huawei_pcie_flr(struct pci_dev *pdev)
>>>>>>>>>> +{
>>>>>>>>>> +    pdev->flr_no_vf_reset = 1;
>>>>>>>>>> +}
>>>>>>>>>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa255, quirk_huawei_pcie_flr);
>>>>>>>>>> +/* ...some other devices have this quirk */
>>>>>>>>>
>>>>>>>>> Yes, I think something along this line will help.
>>>>>>>>>
>>>>>>>>>> diff --git a/include/linux/pci.h b/include/linux/pci.h
>>>>>>>>>> index 18a75c8e615c..e62f9fa4d48f 100644
>>>>>>>>>> --- a/include/linux/pci.h
>>>>>>>>>> +++ b/include/linux/pci.h
>>>>>>>>>> @@ -454,6 +454,7 @@ struct pci_dev {
>>>>>>>>>>      unsigned int    is_probed:1;        /* Device probing in progress */
>>>>>>>>>>      unsigned int    link_active_reporting:1;/* Device capable of reporting link active */
>>>>>>>>>>      unsigned int    no_vf_scan:1;        /* Don't scan for VFs after IOV enablement */
>>>>>>>>>> +    unsigned int    flr_no_vf_reset:1;    /* VF won't be destroyed after PF's FLR */
>>>>>>>>>>
>>>>>>>>>>>> Currently the transactions with the VF will be restored after the
>>>>>>>>>>>> FLR. But this patch will break that, the VF is fully disabled and
>>>>>>>>>>>> the transaction cannot be restored. User needs to reconfigure it,
>>>>>>>>>>>> which is unnecessary before this patch.
>>>>>>>>>>>
>>>>>>>>>>> What does it mean for a "transaction to be restored"?  Maybe you mean
>>>>>>>>>>> this patch removes the *VFs* via sriov_del_vfs(), and whoever
>>>>>>>>>>> initiated the FLR would need to re-enable VFs via pci_enable_sriov()
>>>>>>>>>>> or something similar?
>>>>>>>>>>
>>>>>>>>>> Partly. It'll also terminate the VF users.
>>>>>>>>>> Think that I attach the VF of hns to a VM by vfio and ping the network
>>>>>>>>>> in the VM, when doing FLR the 'ping' will pause and after FLR it'll
>>>>>>>>>> resume. Currenlty The driver handle this in the ->reset_{prepare, done}()
>>>>>>>>>> methods. The user of VM may not realize there is a FLR of the PF as the
>>>>>>>>>> VF always exists and the 'ping' is never terminated.
>>>>>>>>>>
>>>>>>>>>> If we remove the VF when doing FLR, then 1) we'll block in the VF->remove()
>>>>>>>>>> until no one is using the device, for example the 'ping' is finished.
>>>>>>>>>> 2) the VF in the VM no longer exists and we have to re-enable VF and hotplug
>>>>>>>>>> it into the VM and restart the ping. That's a big difference.
>>>>>>>>>>
>>>>>>>>>>> If FLR disables VFs, it seems like we should expect to have to
>>>>>>>>>>> re-enable them if we want them.
>>>>>>>>>>
>>>>>>>>>> It involves a remove()/probe() process of the VF driver and the user
>>>>>>>>>> of the VF will be terminated, just like the situation illustrated
>>>>>>>>>> above.
>>>>>>>>>
>>>>>>>>> I think users of FLR should be able to rely on it working per spec,
>>>>>>>>> i.e., that VFs will be destroyed.  If hardware like hns3 doesn't do
>>>>>>>>> that, the quirk should work around that in software by doing it
>>>>>>>>> explicitly.
>>>>>>>>>
>>>>>>>>> I don't think the non-standard behavior should be exposed to the
>>>>>>>>> users.  The user should not have to know about this hns3 issue.
>>>>>>>>>
>>>>>>>>> If FLR on a standard NIC terminates a ping on a VF, FLR on an hns3 NIC
>>>>>>>>> should also terminate a ping on a VF.
>>>>>>>>>
>>>>>>>>
>>>>>>>> ok thanks for the discussion, agree on that. According to the spec, after
>>>>>>>> the FLR to the PF the VF does not exist anymore, so the ping will be terminated.
>>>>>>>> Our hns3 and sec team are still evaluating it before coming to a solution of
>>>>>>>> whether using a quirk or comform to the spec.
>>>>>>>>
>>>>>>>> For this patch it looks reasonable to me, but some questions about the code below.
>>>>>>>>
>>>>>>>>>>>> Can we handle this problem in another way? Maybe test the VF's
>>>>>>>>>>>> vendor device ID after the FLR reset to see whether it has really
>>>>>>>>>>>> gone or not?
>>>>>>>>>>>>
>>>>>>>>>>>>> sriov_numvfs in sysfs returns old invalid value and does not allow
>>>>>>>>>>>>> setting a new value before explicitly setting 0 in the first place.
>>>>>>>>>>>>>
>>>>>>>>>>>>>>> This patch introduces a simple function, called on the FLR path, that
>>>>>>>>>>>>>>> removes the virtual function devices from the PCI bus and their
>>>>>>>>>>>>>>> corresponding sysfs links with a final clear of the num_vfs value in IOV
>>>>>>>>>>>>>>> state.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
>>>>>>>>>>>>>>> ---
>>>>>>>>>>>>>>>  drivers/pci/iov.c | 21 +++++++++++++++++++++
>>>>>>>>>>>>>>>  drivers/pci/pci.c |  2 ++
>>>>>>>>>>>>>>>  drivers/pci/pci.h |  4 ++++
>>>>>>>>>>>>>>>  3 files changed, 27 insertions(+)
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
>>>>>>>>>>>>>>> index 0267977c9f17..69ee321027b4 100644
>>>>>>>>>>>>>>> --- a/drivers/pci/iov.c
>>>>>>>>>>>>>>> +++ b/drivers/pci/iov.c
>>>>>>>>>>>>>>> @@ -1013,6 +1013,27 @@ int pci_iov_bus_range(struct pci_bus *bus)
>>>>>>>>>>>>>>>      return max ? max - bus->number : 0;
>>>>>>>>>>>>>>>  }
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> +/**
>>>>>>>>>>>>>>> + * pci_reset_iov_state - reset the state of the IOV capability
>>>>>>>>>>>>>>> + * @dev: the PCI device
>>>>>>>>>>>>>>> + */
>>>>>>>>>>>>>>> +void pci_reset_iov_state(struct pci_dev *dev)
>>>>>>>>>>>>>>> +{
>>>>>>>>>>>>>>> +    struct pci_sriov *iov = dev->sriov;
>>>>>>>>>>>>>>> +
>>>>>>>>>>>>>>> +    if (!dev->is_physfn)
>>>>>>>>>>>>>>> +        return;
>>>>>>>>>>>>>>> +    if (!iov->num_VFs)
>>>>>>>>>>>>>>> +        return;
>>>>>>>>>>>>>>> +
>>>>>>>>>>>>>>> +    sriov_del_vfs(dev);
>>>>>>>>>>>>>>> +
>>>>>>>>>>>>>>> +    if (iov->link != dev->devfn)
>>>>>>>>>>>>>>> +        sysfs_remove_link(&dev->dev.kobj, "dep_link");
>>>>>>>>>>>>>>> +
>>>>>>>>>>>>>>> +    iov->num_VFs = 0;
>>>>>>>>>>>>>>> +}
>>>>>>>>>>>>>>> +
>>>>>>>>
>>>>>>>> Any reason for not using pci_disable_sriov()?
>>>>>>>
>>>>>>> The issue with pci_disable_sriov() is that it calls sriov_disable(),
>>>>>>> which directly uses pci_cfg_access_lock(), leading to deadlock on the
>>>>>>> FLR path.
>>>>>>>
>>>>>>
>>>>>> That'll be a problem. Well my main concern is whether the VFs will be reset
>>>>>> correctly through pci_reset_iov_state() as it lacks the participant of
>>>>>> PF driver and bios (seems may needed only on powerpc, not sure), which is
>>>>>> necessary in the enable/disable routine through $pci_dev/sriov_numvfs.
>>>>>>
>>>>>>>>
>>>>>>>> With the spec the related registers in the SRIOV cap will be reset so
>>>>>>>> it's ok in general. But for some devices not following the spec like hns3,
>>>>>>>> some fields like VF enable won't be reset and keep enabled after the FLR.
>>>>>>>> In this case after the FLR the VF devices in the system has gone but
>>>>>>>> the state of the PF SRIOV cap leaves uncleared. pci_disable_sriov()
>>>>>>>> will reset the whole SRIOV cap. It'll also call pcibios_sriov_disable()
>>>>>>>> to correct handle the VF disabling on some platforms, IIUC.
>>>>>>>>
>>>>>>>> Or is it better to use pdev->driver->sriov_configure(pdev,0)?
>>>>>>>> PF drivers must implement ->sriov_configure() for enabling/disabling
>>>>>>>> the VF but we totally skip the PF driver here.
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>> Yicong
>>>>>>>>
>>>>>>>>>>>>>>>  /**
>>>>>>>>>>>>>>>   * pci_enable_sriov - enable the SR-IOV capability
>>>>>>>>>>>>>>>   * @dev: the PCI device
>>>>>>>>>>>>>>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>>>>>>>>>>>>>>> index 3d2fb394986a..535f19d37e8d 100644
>>>>>>>>>>>>>>> --- a/drivers/pci/pci.c
>>>>>>>>>>>>>>> +++ b/drivers/pci/pci.c
>>>>>>>>>>>>>>> @@ -4694,6 +4694,8 @@ EXPORT_SYMBOL(pci_wait_for_pending_transaction);
>>>>>>>>>>>>>>>   */
>>>>>>>>>>>>>>>  int pcie_flr(struct pci_dev *dev)
>>>>>>>>>>>>>>>  {
>>>>>>>>>>>>>>> +    pci_reset_iov_state(dev);
>>>>>>>>>>>>>>> +
>>>>>>>>>>>>>>>      if (!pci_wait_for_pending_transaction(dev))
>>>>>>>>>>>>>>>          pci_err(dev, "timed out waiting for pending transaction; performing function level reset anyway\n");
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
>>>>>>>>>>>>>>> index 3d60cabde1a1..7bb144fbec76 100644
>>>>>>>>>>>>>>> --- a/drivers/pci/pci.h
>>>>>>>>>>>>>>> +++ b/drivers/pci/pci.h
>>>>>>>>>>>>>>> @@ -480,6 +480,7 @@ void pci_iov_update_resource(struct pci_dev *dev, int resno);
>>>>>>>>>>>>>>>  resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
>>>>>>>>>>>>>>>  void pci_restore_iov_state(struct pci_dev *dev);
>>>>>>>>>>>>>>>  int pci_iov_bus_range(struct pci_bus *bus);
>>>>>>>>>>>>>>> +void pci_reset_iov_state(struct pci_dev *dev);
>>>>>>>>>>>>>>>  extern const struct attribute_group sriov_pf_dev_attr_group;
>>>>>>>>>>>>>>>  extern const struct attribute_group sriov_vf_dev_attr_group;
>>>>>>>>>>>>>>>  #else
>>>>>>>>>>>>>>> @@ -501,6 +502,9 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
>>>>>>>>>>>>>>>  {
>>>>>>>>>>>>>>>      return 0;
>>>>>>>>>>>>>>>  }
>>>>>>>>>>>>>>> +static inline void pci_reset_iov_state(struct pci_dev *dev)
>>>>>>>>>>>>>>> +{
>>>>>>>>>>>>>>> +}
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>  #endif /* CONFIG_PCI_IOV */
>>>>>>>>> .
>>>>>>>>>
>>>>>>> .
>>>>>>>
>>>>>> .
>>>>>>
>>> .
>>>
> .