From: "Vishwanathrao Badarkhe, Manish" <manishv.b@ti.com>
To: "Vishwanathrao Badarkhe, Manish" <manishv.b@ti.com>,
"devicetree-discuss@lists.ozlabs.org"
<devicetree-discuss@lists.ozlabs.org>,
"linux-doc@vger.kernel.org" <linux-doc@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"davinci-linux-open-source@linux.davincidsp.com"
<davinci-linux-open-source@linux.davincidsp.com>
Cc: "AnilKumar, Chimata" <anilkumar@ti.com>,
"tony@atomide.com" <tony@atomide.com>, "hs@denx.de" <hs@denx.de>,
"broonie@opensource.wolfsonmicro.com"
<broonie@opensource.wolfsonmicro.com>,
"sameo@linux.intel.com" <sameo@linux.intel.com>,
"khilman@deeprootsystems.com" <khilman@deeprootsystems.com>,
"Nori, Sekhar" <nsekhar@ti.com>,
"linus.walleij@linaro.org" <linus.walleij@linaro.org>,
"linux@arm.linux.org.uk" <linux@arm.linux.org.uk>,
"rob@landley.net" <rob@landley.net>,
"rob.herring@calxeda.com" <rob.herring@calxeda.com>,
"grant.likely@secretlab.ca" <grant.likely@secretlab.ca>
Subject: RE: [PATCH V2 6/6] ARM: davinci: da850: add tps6507x regulator DT data
Date: Thu, 7 Feb 2013 10:22:19 +0000 [thread overview]
Message-ID: <A4887BF146CD57468F700B415D2F4701583323@DBDE01.ent.ti.com> (raw)
In-Reply-To: <1359445134-13323-7-git-send-email-manishv.b@ti.com>
Hi Mark,
On Tue, Jan 29, 2013 at 13:08:54, Vishwanathrao Badarkhe, Manish wrote:
> Add tps6507x regulator device tree data to da850-evm by adding regulator consumers with tightened constraints and regulator-name.TPS6507x regulator handle can be obtained by using this regulator name.
> Regulator constraints are added as per da850 board file.
>
> Regulator names are given as per maximum output voltage the regulator is capable to provide.
> for e.g. regulator name for dcdc1 is "VDCDC1_3.3V".
> Also, add tps6507x PMIC I2C slave device under I2C0 node.
>
> Tested on da850-evm.
>
> Signed-off-by: Vishwanathrao Badarkhe, Manish <manishv.b@ti.com>
> ---
> Changes since V1:
> - No change
>
> :100644 100644 c9ed683... 58e6961... M arch/arm/boot/dts/da850-evm.dts
> arch/arm/boot/dts/da850-evm.dts | 63 +++++++++++++++++++++++++++++++++++++++
> 1 files changed, 63 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index c9ed683..58e6961 100644
> --- a/arch/arm/boot/dts/da850-evm.dts
> +++ b/arch/arm/boot/dts/da850-evm.dts
> @@ -31,6 +31,10 @@
> status = "okay";
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pins>;
> +
> + tps: tps@48 {
> + reg = <0x48>;
> + };
> };
> };
> nand_cs3@62000000 {
> @@ -38,4 +42,63 @@
> pinctrl-names = "default";
> pinctrl-0 = <&nand_cs3_pins>;
> };
> + vbat: fixedregulator@0 {
> + compatible = "regulator-fixed";
> + regulator-name = "vbat";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-boot-on;
> + };
> +};
> +
> +/include/ "tps6507x.dtsi"
> +
> +&tps {
> + vdcdc1_2-supply = <&vbat>;
> + vdcdc3-supply = <&vbat>;
> + vldo1_2-supply = <&vbat>;
> +
> + regulators {
> + vdcdc1_reg: regulator@0 {
> + regulator-name = "VDCDC1_3.3V";
> + regulator-min-microvolt = <3150000>;
> + regulator-max-microvolt = <3450000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vdcdc2_reg: regulator@1 {
> + regulator-name = "VDCDC2_3.3V";
> + regulator-min-microvolt = <1710000>;
> + regulator-max-microvolt = <3450000>;
> + regulator-always-on;
> + regulator-boot-on;
> + ti,defdcdc_default = <1>;
> + };
> +
> + vdcdc3_reg: regulator@2 {
> + regulator-name = "VDCDC3_1.2V";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + regulator-boot-on;
> + ti,defdcdc_default = <1>;
> + };
> +
> + ldo1_reg: regulator@3 {
> + regulator-name = "LDO1_1.8V";
> + regulator-min-microvolt = <1710000>;
> + regulator-max-microvolt = <1890000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo2_reg: regulator@4 {
> + regulator-name = "LDO2_1.2V";
> + regulator-min-microvolt = <1140000>;
> + regulator-max-microvolt = <1320000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> + };
> };
> --
> 1.7.4.1
>
>
If there are not any comments on this patch, Could you please accept
this patch?
Regards,
Manish
prev parent reply other threads:[~2013-02-07 10:22 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-29 7:38 [PATCH V2 0/6] davinci: DT support for i2c0 and tps6507x Vishwanathrao Badarkhe, Manish
2013-01-29 7:38 ` [PATCH V2 1/6] pinctrl: pinctrl-single: use arch_initcall and module_exit Vishwanathrao Badarkhe, Manish
2013-01-29 10:59 ` Linus Walleij
2013-01-29 12:02 ` Vishwanathrao Badarkhe, Manish
2013-02-01 7:05 ` Sekhar Nori
2013-02-01 17:09 ` Tony Lindgren
2013-02-01 17:11 ` Tony Lindgren
2013-02-05 6:36 ` Vishwanathrao Badarkhe, Manish
2013-02-05 11:27 ` Russell King - ARM Linux
2013-02-06 6:04 ` Vishwanathrao Badarkhe, Manish
2013-02-05 13:00 ` Linus Walleij
2013-02-06 4:57 ` Vishwanathrao Badarkhe, Manish
2013-01-29 7:38 ` [PATCH V2 2/6] ARM: davinci: da850: add OF_DEV_AUXDATA entry for I2C0 Vishwanathrao Badarkhe, Manish
2013-01-29 7:38 ` [PATCH V2 3/6] ARM: davinci: da850: add DT node " Vishwanathrao Badarkhe, Manish
2013-02-03 12:49 ` Sekhar Nori
2013-02-04 3:07 ` Vishwanathrao Badarkhe, Manish
2013-01-29 7:38 ` [PATCH V2 4/6] mfd: tps6507x: add device-tree support Vishwanathrao Badarkhe, Manish
2013-02-03 22:31 ` Samuel Ortiz
2013-01-29 7:38 ` [PATCH V2 5/6] ARM: regulator: add tps6507x device tree data Vishwanathrao Badarkhe, Manish
2013-02-07 10:21 ` Vishwanathrao Badarkhe, Manish
2013-01-29 7:38 ` [PATCH V2 6/6] ARM: davinci: da850: add tps6507x regulator DT data Vishwanathrao Badarkhe, Manish
2013-02-07 10:22 ` Vishwanathrao Badarkhe, Manish [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=A4887BF146CD57468F700B415D2F4701583323@DBDE01.ent.ti.com \
--to=manishv.b@ti.com \
--cc=anilkumar@ti.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=davinci-linux-open-source@linux.davincidsp.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=hs@denx.de \
--cc=khilman@deeprootsystems.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=nsekhar@ti.com \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=sameo@linux.intel.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).