From: Hongxing Zhu <hongxing.zhu@nxp.com>
To: Lucas Stach <l.stach@pengutronix.de>,
"bhelgaas@google.com" <bhelgaas@google.com>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"broonie@kernel.org" <broonie@kernel.org>,
"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
"festevam@gmail.com" <festevam@gmail.com>,
"francesco.dolcini@toradex.com" <francesco.dolcini@toradex.com>
Cc: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"kernel@pengutronix.de" <kernel@pengutronix.de>,
dl-linux-imx <linux-imx@nxp.com>
Subject: RE: [PATCH v14 10/17] PCI: imx6: Turn off regulator when system is in suspend mode
Date: Wed, 13 Jul 2022 10:56:39 +0000 [thread overview]
Message-ID: <AS8PR04MB8676F0E41C38891B2C21F8D78C899@AS8PR04MB8676.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <6f0cd4c69e0eba3e5da513cfbbe5f162e650a8f1.camel@pengutronix.de>
> -----Original Message-----
> From: Lucas Stach <l.stach@pengutronix.de>
> Sent: 2022年7月13日 16:34
> To: Hongxing Zhu <hongxing.zhu@nxp.com>; bhelgaas@google.com;
> robh+dt@kernel.org; broonie@kernel.org; lorenzo.pieralisi@arm.com;
> festevam@gmail.com; francesco.dolcini@toradex.com
> Cc: linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; kernel@pengutronix.de; dl-linux-imx
> <linux-imx@nxp.com>
> Subject: Re: [PATCH v14 10/17] PCI: imx6: Turn off regulator when system is in
> suspend mode
>
> Am Freitag, dem 01.07.2022 um 11:25 +0800 schrieb Richard Zhu:
> > The driver should undo any enables it did itself. The regulator
> > disable shouldn't be basing decisions on regulator_is_enabled().
> >
> > Move the regulator_disable to the suspend function, turn off regulator
> > when the system is in suspend mode.
> >
> > To keep the balance of the regulator usage counter, disable the
> > regulator in shutdown.
> >
> > Link:
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore
> > .kernel.org%2Fr%2F1655189942-12678-6-git-send-email-hongxing.z&d
> at
> >
> a=05%7C01%7Chongxing.zhu%40nxp.com%7C361c9bf365b64895482808da6
> 4aa7cca%
> >
> 7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6379329806385373
> 39%7CUnkn
> >
> own%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1
> haWwi
> >
> LCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=A%2Fw6AFCddC0T%2FA
> ocBT%2F7OJZ
> > ddAeYPTbgeAxpHpPubkw%3D&reserved=0
> > hu@nxp.com
> > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> > ---
> > drivers/pci/controller/dwc/pci-imx6.c | 19 +++++++------------
> > 1 file changed, 7 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pci-imx6.c
> > b/drivers/pci/controller/dwc/pci-imx6.c
> > index 2b42c37f1617..f72eb609769b 100644
> > --- a/drivers/pci/controller/dwc/pci-imx6.c
> > +++ b/drivers/pci/controller/dwc/pci-imx6.c
> > @@ -670,8 +670,6 @@ static void imx6_pcie_clk_disable(struct imx6_pcie
> > *imx6_pcie)
> >
> > static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
> > {
> > - struct device *dev = imx6_pcie->pci->dev;
> > -
> > switch (imx6_pcie->drvdata->variant) {
> > case IMX7D:
> > case IMX8MQ:
> > @@ -702,14 +700,6 @@ static void imx6_pcie_assert_core_reset(struct
> imx6_pcie *imx6_pcie)
> > break;
> > }
> >
> > - if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
> > - int ret = regulator_disable(imx6_pcie->vpcie);
> > -
> > - if (ret)
> > - dev_err(dev, "failed to disable vpcie regulator: %d\n",
> > - ret);
> > - }
> > -
> > /* Some boards don't have PCIe reset GPIO. */
> > if (gpio_is_valid(imx6_pcie->reset_gpio))
> > gpio_set_value_cansleep(imx6_pcie->reset_gpio,
> > @@ -722,7 +712,7 @@ static int imx6_pcie_deassert_core_reset(struct
> imx6_pcie *imx6_pcie)
> > struct device *dev = pci->dev;
> > int ret;
> >
> > - if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
> > + if (imx6_pcie->vpcie) {
> > ret = regulator_enable(imx6_pcie->vpcie);
> > if (ret) {
> > dev_err(dev, "failed to enable vpcie regulator: %d\n",
>
> The regulator really has nothing to do with the core reset. Please move this
> regulator enable into imx6_pcie_host_init().
Hi Lucas:
Thanks for your comments.
Got that. Had done it in the 11/17 commit.
>
> > @@ -795,7 +785,7 @@ static int imx6_pcie_deassert_core_reset(struct
> imx6_pcie *imx6_pcie)
> > return 0;
> >
> > err_clks:
> > - if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
> > + if (imx6_pcie->vpcie) {
> > ret = regulator_disable(imx6_pcie->vpcie);
> > if (ret)
> > dev_err(dev, "failed to disable vpcie regulator: %d\n", @@
> -1022,6
> > +1012,9 @@ static int imx6_pcie_suspend_noirq(struct device *dev)
> > break;
> > }
> >
> > + if (imx6_pcie->vpcie)
> > + regulator_disable(imx6_pcie->vpcie);
> > +
> > return 0;
> > }
> >
> > @@ -1268,6 +1261,8 @@ static void imx6_pcie_shutdown(struct
> > platform_device *pdev)
> >
> > /* bring down link, so bootloader gets clean state in case of reboot */
> > imx6_pcie_assert_core_reset(imx6_pcie);
> > + if (imx6_pcie->vpcie)
> > + regulator_disable(imx6_pcie->vpcie);
>
> This looks like a separate change, not mentioned in the commit message.
> I'm not sure if we should do this. Shutdown is supposed to just stop the device,
> which is already achieved by imx6_pcie_assert_core_reset().
>
> If we would want to do a full cleanup here we would also need to disable
> clocks and get the reset GPIO into asserted state. I don't think we want to do
> all of this here.
The regulator_disable() was contained in imx6_pcie_assert_core_reset() before.
When refine the regulator usage, the regulator_disable() is moved out of
imx6_pcie_assert_core_reset().
Based on the discussion [1] with Francesco.
To keep the same behavior, the regulator_disable() is placed behind of
imx6_pcie_assert_core_reset() in imx6_pcie_shutdown() here.
[1]https://patchwork.ozlabs.org/project/linux-pci/patch/1644290735-3797-6-git-send-email-hongxing.zhu@nxp.com/
Best Regards
Richard
>
> Regards,
> Lucas
> > }
> >
> > static const struct imx6_pcie_drvdata drvdata[] = {
>
next prev parent reply other threads:[~2022-07-13 10:56 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-01 3:25 [PATCH v14 0/17] PCI: imx6: refine codes and add the error propagation Richard Zhu
2022-07-01 3:25 ` [PATCH v14 01/17] PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier Richard Zhu
2022-07-13 8:13 ` Lucas Stach
2022-07-01 3:25 ` [PATCH v14 02/17] PCI: imx6: Move PHY management functions together Richard Zhu
2022-07-13 8:15 ` Lucas Stach
2022-07-01 3:25 ` [PATCH v14 03/17] PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier Richard Zhu
2022-07-13 8:16 ` Lucas Stach
2022-07-01 3:25 ` [PATCH v14 04/17] PCI: imx6: Move imx6_pcie_clk_disable() earlier Richard Zhu
2022-07-01 3:25 ` [PATCH v14 05/17] PCI: imx6: Factor out ref clock disable to match enable Richard Zhu
2022-07-13 8:17 ` Lucas Stach
2022-07-01 3:25 ` [PATCH v14 06/17] PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() Richard Zhu
2022-07-01 3:25 ` [PATCH v14 07/17] PCI: imx6: Propagate .host_init() errors to caller Richard Zhu
2022-07-01 3:25 ` [PATCH v14 08/17] PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks Richard Zhu
2022-07-01 3:25 ` [PATCH v14 09/17] PCI: imx6: Call host init function directly in resume Richard Zhu
2022-07-13 8:26 ` Lucas Stach
2022-07-01 3:25 ` [PATCH v14 10/17] PCI: imx6: Turn off regulator when system is in suspend mode Richard Zhu
2022-07-13 8:34 ` Lucas Stach
2022-07-13 10:56 ` Hongxing Zhu [this message]
2022-07-13 11:22 ` Lucas Stach
2022-07-13 12:55 ` Hongxing Zhu
2022-07-01 3:25 ` [PATCH v14 11/17] PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() Richard Zhu
2022-07-13 8:41 ` Lucas Stach
2022-07-13 10:57 ` Hongxing Zhu
2022-07-01 3:25 ` [PATCH v14 12/17] PCI: imx6: Mark the link down as non-fatal error Richard Zhu
2022-07-13 8:44 ` Lucas Stach
2022-07-01 3:25 ` [PATCH v14 13/17] PCI: imx6: Reduce resume time by only starting link if it was up before suspend Richard Zhu
2022-07-13 8:47 ` Lucas Stach
2022-07-13 10:57 ` Hongxing Zhu
2022-07-01 3:25 ` [PATCH v14 14/17] PCI: imx6: Do not hide phy driver callbacks and refine the error handling Richard Zhu
2022-07-13 8:58 ` Lucas Stach
2022-07-13 10:57 ` Hongxing Zhu
2022-07-13 11:17 ` Lucas Stach
2022-07-13 12:52 ` Hongxing Zhu
2022-07-01 3:25 ` [PATCH v14 15/17] PCI: imx6: Disable clocks in reverse order of enable Richard Zhu
2022-07-13 8:59 ` Lucas Stach
2022-07-01 3:25 ` [PATCH v14 16/17] PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier Richard Zhu
2022-07-13 9:04 ` Lucas Stach
2022-07-13 11:00 ` Hongxing Zhu
2022-07-01 3:25 ` [PATCH v14 17/17] PCI: imx6: Reformat suspend callback to keep symmetric with resume Richard Zhu
2022-07-13 9:07 ` Lucas Stach
2022-07-11 22:29 ` [PATCH v14 0/17] PCI: imx6: refine codes and add the error propagation Bjorn Helgaas
2022-07-13 16:45 ` Bjorn Helgaas
2022-07-14 4:15 ` Hongxing Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AS8PR04MB8676F0E41C38891B2C21F8D78C899@AS8PR04MB8676.eurprd04.prod.outlook.com \
--to=hongxing.zhu@nxp.com \
--cc=bhelgaas@google.com \
--cc=broonie@kernel.org \
--cc=festevam@gmail.com \
--cc=francesco.dolcini@toradex.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).