From: Lucas Stach <l.stach@pengutronix.de>
To: Richard Zhu <hongxing.zhu@nxp.com>,
bhelgaas@google.com, robh+dt@kernel.org, broonie@kernel.org,
lorenzo.pieralisi@arm.com, festevam@gmail.com,
francesco.dolcini@toradex.com
Cc: linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de,
linux-imx@nxp.com
Subject: Re: [PATCH v14 17/17] PCI: imx6: Reformat suspend callback to keep symmetric with resume
Date: Wed, 13 Jul 2022 11:07:08 +0200 [thread overview]
Message-ID: <eb64cbf58ae6b6fd1e6b993f15e2c5871f4e1650.camel@pengutronix.de> (raw)
In-Reply-To: <1656645935-1370-18-git-send-email-hongxing.zhu@nxp.com>
Am Freitag, dem 01.07.2022 um 11:25 +0800 schrieb Richard Zhu:
> Create imx6_pcie_stop_link() and imx6_pcie_host_exit() functions.
> Encapsulate clocks, regulators disables and PHY uninitialization into
> imx6_pcie_host_exit().
> To keep suspend/resume symmetric as much as possible, invoke these two
> new created functions in suspend callback.
>
> To be symmetric with imx6_pcie_host_exit(), move imx6_pcie_clk_enable()
> to imx6_pcie_host_init() from imx6_pcie_deassert_core_reset().
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
> ---
> drivers/pci/controller/dwc/pci-imx6.c | 60 ++++++++++++++++-----------
> 1 file changed, 36 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 1cf8bf9035f2..bf8992a6c238 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -703,13 +703,6 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> {
> struct dw_pcie *pci = imx6_pcie->pci;
> struct device *dev = pci->dev;
> - int ret;
> -
> - ret = imx6_pcie_clk_enable(imx6_pcie);
> - if (ret) {
> - dev_err(dev, "unable to enable pcie clocks: %d\n", ret);
> - return ret;
> - }
>
> switch (imx6_pcie->drvdata->variant) {
> case IMX8MQ:
> @@ -905,6 +898,14 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
> return 0;
> }
>
> +static void imx6_pcie_stop_link(struct dw_pcie *pci)
> +{
> + struct device *dev = pci->dev;
> +
> + /* Turn off PCIe LTSSM */
> + imx6_pcie_ltssm_disable(dev);
> +}
> +
> static int imx6_pcie_host_init(struct pcie_port *pp)
> {
> struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> @@ -922,11 +923,17 @@ static int imx6_pcie_host_init(struct pcie_port *pp)
> return ret;
> }
> }
> + ret = imx6_pcie_clk_enable(imx6_pcie);
> + if (ret) {
> + dev_err(dev, "unable to enable pcie clocks: %d\n", ret);
> + goto err_reg_disable;
> + }
> +
> if (imx6_pcie->phy) {
> ret = phy_power_on(imx6_pcie->phy);
> if (ret) {
> dev_err(dev, "pcie phy power up failed.\n");
> - goto err_reg_disable;
> + goto err_clk_disable;
> }
> }
>
> @@ -947,17 +954,33 @@ static int imx6_pcie_host_init(struct pcie_port *pp)
>
> return 0;
>
> -err_clk_disable:
> - imx6_pcie_clk_disable(imx6_pcie);
> err_phy_off:
> if (imx6_pcie->phy)
> phy_power_off(imx6_pcie->phy);
> +err_clk_disable:
> + imx6_pcie_clk_disable(imx6_pcie);
> err_reg_disable:
> if (imx6_pcie->vpcie)
> regulator_disable(imx6_pcie->vpcie);
> return ret;
> }
>
> +static void imx6_pcie_host_exit(struct pcie_port *pp)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> + struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
> +
> + if (imx6_pcie->phy) {
> + if (phy_power_off(imx6_pcie->phy))
> + dev_err(pci->dev, "unable to power off PHY\n");
> + phy_exit(imx6_pcie->phy);
> + }
> + imx6_pcie_clk_disable(imx6_pcie);
> +
> + if (imx6_pcie->vpcie)
> + regulator_disable(imx6_pcie->vpcie);
> +}
> +
> static const struct dw_pcie_host_ops imx6_pcie_host_ops = {
> .host_init = imx6_pcie_host_init,
> };
> @@ -1007,25 +1030,14 @@ static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
> static int imx6_pcie_suspend_noirq(struct device *dev)
> {
> struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
> + struct pcie_port *pp = &imx6_pcie->pci->pp;
>
> if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND))
> return 0;
>
> imx6_pcie_pm_turnoff(imx6_pcie);
> - imx6_pcie_ltssm_disable(dev);
> - imx6_pcie_clk_disable(imx6_pcie);
> - switch (imx6_pcie->drvdata->variant) {
> - case IMX8MM:
> - if (phy_power_off(imx6_pcie->phy))
> - dev_err(dev, "unable to power off PHY\n");
> - phy_exit(imx6_pcie->phy);
> - break;
> - default:
> - break;
> - }
> -
> - if (imx6_pcie->vpcie)
> - regulator_disable(imx6_pcie->vpcie);
> + imx6_pcie_stop_link(imx6_pcie->pci);
> + imx6_pcie_host_exit(pp);
>
> return 0;
> }
next prev parent reply other threads:[~2022-07-13 9:07 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-01 3:25 [PATCH v14 0/17] PCI: imx6: refine codes and add the error propagation Richard Zhu
2022-07-01 3:25 ` [PATCH v14 01/17] PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier Richard Zhu
2022-07-13 8:13 ` Lucas Stach
2022-07-01 3:25 ` [PATCH v14 02/17] PCI: imx6: Move PHY management functions together Richard Zhu
2022-07-13 8:15 ` Lucas Stach
2022-07-01 3:25 ` [PATCH v14 03/17] PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier Richard Zhu
2022-07-13 8:16 ` Lucas Stach
2022-07-01 3:25 ` [PATCH v14 04/17] PCI: imx6: Move imx6_pcie_clk_disable() earlier Richard Zhu
2022-07-01 3:25 ` [PATCH v14 05/17] PCI: imx6: Factor out ref clock disable to match enable Richard Zhu
2022-07-13 8:17 ` Lucas Stach
2022-07-01 3:25 ` [PATCH v14 06/17] PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() Richard Zhu
2022-07-01 3:25 ` [PATCH v14 07/17] PCI: imx6: Propagate .host_init() errors to caller Richard Zhu
2022-07-01 3:25 ` [PATCH v14 08/17] PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks Richard Zhu
2022-07-01 3:25 ` [PATCH v14 09/17] PCI: imx6: Call host init function directly in resume Richard Zhu
2022-07-13 8:26 ` Lucas Stach
2022-07-01 3:25 ` [PATCH v14 10/17] PCI: imx6: Turn off regulator when system is in suspend mode Richard Zhu
2022-07-13 8:34 ` Lucas Stach
2022-07-13 10:56 ` Hongxing Zhu
2022-07-13 11:22 ` Lucas Stach
2022-07-13 12:55 ` Hongxing Zhu
2022-07-01 3:25 ` [PATCH v14 11/17] PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() Richard Zhu
2022-07-13 8:41 ` Lucas Stach
2022-07-13 10:57 ` Hongxing Zhu
2022-07-01 3:25 ` [PATCH v14 12/17] PCI: imx6: Mark the link down as non-fatal error Richard Zhu
2022-07-13 8:44 ` Lucas Stach
2022-07-01 3:25 ` [PATCH v14 13/17] PCI: imx6: Reduce resume time by only starting link if it was up before suspend Richard Zhu
2022-07-13 8:47 ` Lucas Stach
2022-07-13 10:57 ` Hongxing Zhu
2022-07-01 3:25 ` [PATCH v14 14/17] PCI: imx6: Do not hide phy driver callbacks and refine the error handling Richard Zhu
2022-07-13 8:58 ` Lucas Stach
2022-07-13 10:57 ` Hongxing Zhu
2022-07-13 11:17 ` Lucas Stach
2022-07-13 12:52 ` Hongxing Zhu
2022-07-01 3:25 ` [PATCH v14 15/17] PCI: imx6: Disable clocks in reverse order of enable Richard Zhu
2022-07-13 8:59 ` Lucas Stach
2022-07-01 3:25 ` [PATCH v14 16/17] PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier Richard Zhu
2022-07-13 9:04 ` Lucas Stach
2022-07-13 11:00 ` Hongxing Zhu
2022-07-01 3:25 ` [PATCH v14 17/17] PCI: imx6: Reformat suspend callback to keep symmetric with resume Richard Zhu
2022-07-13 9:07 ` Lucas Stach [this message]
2022-07-11 22:29 ` [PATCH v14 0/17] PCI: imx6: refine codes and add the error propagation Bjorn Helgaas
2022-07-13 16:45 ` Bjorn Helgaas
2022-07-14 4:15 ` Hongxing Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=eb64cbf58ae6b6fd1e6b993f15e2c5871f4e1650.camel@pengutronix.de \
--to=l.stach@pengutronix.de \
--cc=bhelgaas@google.com \
--cc=broonie@kernel.org \
--cc=festevam@gmail.com \
--cc=francesco.dolcini@toradex.com \
--cc=hongxing.zhu@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).