* [PATCH v5 0/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver @ 2016-01-14 5:04 Wenyou Yang 2016-01-14 5:04 ` [PATCH v5 1/2] " Wenyou Yang 2016-01-14 5:04 ` [PATCH v5 2/2] mfd: add documentation for ACT8945A DT bindings Wenyou Yang 0 siblings, 2 replies; 11+ messages in thread From: Wenyou Yang @ 2016-01-14 5:04 UTC (permalink / raw) To: Lee Jones, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala Cc: Javier Martinez Canillas, Krzysztof Kozlowski, Nicolas Ferre, linux-arm-kernel, linux-kernel, devicetree, Wenyou Yang This patch set adds support for the Active-semi ACT8945A PMIC MFD driver. It is a Multi Function Device with the following subdevices: - Regulator - Charger It is interfaced to the host controller using I2C interface, ACT8945A is a child device of the I2C. Changes in v5: - change depends on to 'I2C=y'. Changes in v4: - add a space before .compatible. - collect Reviewed-by from Krzysztof Kozlowski. Changes in v3: - fix the tabbing errors in Example. - use "pmic@5b" label, not "act8945a@5b" in Example. - collect Acked-by from Rob. Changes in v2: - add more help information in Kconfig. - update the file header with short version license and author line. - remove unused structure members (dev, i2c_client) of stuct act8945a_dev. - use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'. - use more explicit info to indicate the failure to add sub devices. - remove the unnecessary print out. - substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2"). - use more specific label in Example. - add pmic and charger nodes in Example. Wenyou Yang (2): mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver mfd: add documentation for ACT8945A DT bindings Documentation/devicetree/bindings/mfd/act8945a.txt | 82 +++++++++++++++ drivers/mfd/Kconfig | 11 ++ drivers/mfd/Makefile | 1 + drivers/mfd/act8945a.c | 109 ++++++++++++++++++++ include/linux/mfd/act8945a.h | 21 ++++ 5 files changed, 224 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/act8945a.txt create mode 100644 drivers/mfd/act8945a.c create mode 100644 include/linux/mfd/act8945a.h -- 1.7.9.5 ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v5 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver 2016-01-14 5:04 [PATCH v5 0/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver Wenyou Yang @ 2016-01-14 5:04 ` Wenyou Yang 2016-01-14 13:35 ` Peter Korsgaard 2016-01-14 5:04 ` [PATCH v5 2/2] mfd: add documentation for ACT8945A DT bindings Wenyou Yang 1 sibling, 1 reply; 11+ messages in thread From: Wenyou Yang @ 2016-01-14 5:04 UTC (permalink / raw) To: Lee Jones, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala Cc: Javier Martinez Canillas, Krzysztof Kozlowski, Nicolas Ferre, linux-arm-kernel, linux-kernel, devicetree, Wenyou Yang This patch adds support for the Active-semi ACT8945A PMIC. It is a Multi Function Device with the following subdevices: - Regulator - Charger It is interfaced to the host controller using I2C interface, ACT8945A is a child device of the I2C. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> --- Changes in v5: - change depends on to 'I2C=y'. Changes in v4: - add a space before .compatible. - collect Reviewed-by from Krzysztof Kozlowski. Changes in v3: None Changes in v2: - add more help information in Kconfig. - update the file header with short version license and author line. - remove unused structure members (dev, i2c_client) of stuct act8945a_dev. - use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'. - use more explicit info to indicate the failure to add sub devices. - remove the unnecessary print out. - substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2"). drivers/mfd/Kconfig | 11 +++++ drivers/mfd/Makefile | 1 + drivers/mfd/act8945a.c | 109 ++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/act8945a.h | 21 ++++++++ 4 files changed, 142 insertions(+) create mode 100644 drivers/mfd/act8945a.c create mode 100644 include/linux/mfd/act8945a.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 9ca66de..cd8762a 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -18,6 +18,17 @@ config MFD_CS5535 This is the core driver for CS5535/CS5536 MFD functions. This is necessary for using the board's GPIO and MFGPT functionality. +config MFD_ACT8945A + bool "Active-semi ACT8945A" + select MFD_CORE + select REGMAP_I2C + depends on I2C=y && OF + help + Support for the ACT8945A PMIC from Active-semi. This device + features three step-down DC/DC converters and four low-dropout + linear regulators, along with a complete ActivePath battery + charger. + config MFD_AS3711 bool "AMS AS3711" select MFD_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 0f230a6..2f1ca82 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o +obj-$(CONFIG_MFD_ACT8945A) += act8945a.o obj-$(CONFIG_MFD_SM501) += sm501.o obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c new file mode 100644 index 0000000..f5745b1 --- /dev/null +++ b/drivers/mfd/act8945a.c @@ -0,0 +1,109 @@ +/* + * MFD driver for Active-semi ACT8945a PMIC + * + * Copyright (C) 2015 Atmel Corporation. + * + * Author: Wenyou Yang <wenyou.yang@atmel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/i2c.h> +#include <linux/mfd/act8945a.h> +#include <linux/mfd/core.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regmap.h> + +static const struct mfd_cell act8945a_devs[] = { + { + .name = "act8945a-pmic", + .of_compatible = "active-semi,act8945a-regulator", + }, + { + .name = "act8945a-charger", + .of_compatible = "active-semi,act8945a-charger", + }, +}; + +static const struct regmap_config act8945a_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int act8945a_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct act8945a_dev *act8945a; + int ret; + + act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL); + if (!act8945a) + return -ENOMEM; + + i2c_set_clientdata(i2c, act8945a); + + act8945a->regmap = devm_regmap_init_i2c(i2c, &act8945a_regmap_config); + if (IS_ERR(act8945a->regmap)) { + ret = PTR_ERR(act8945a->regmap); + dev_err(&i2c->dev, "regmap init failed: %d\n", ret); + return ret; + } + + ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, act8945a_devs, + ARRAY_SIZE(act8945a_devs), NULL, 0, NULL); + if (ret) { + dev_err(&i2c->dev, "Failed to add sub devices\n"); + return ret; + } + + return 0; +} + +static int act8945a_i2c_remove(struct i2c_client *i2c) +{ + mfd_remove_devices(&i2c->dev); + + return 0; +} + +static const struct i2c_device_id act8945a_i2c_id[] = { + { "act8945a", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id); + +static const struct of_device_id act8945a_of_match[] = { + { .compatible = "active-semi,act8945a", }, + {}, +}; +MODULE_DEVICE_TABLE(of, act8945a_of_match); + +static struct i2c_driver act8945a_i2c_driver = { + .driver = { + .name = "act8945a", + .of_match_table = of_match_ptr(act8945a_of_match), + }, + .probe = act8945a_i2c_probe, + .remove = act8945a_i2c_remove, + .id_table = act8945a_i2c_id, +}; + +static int __init act8945a_i2c_init(void) +{ + return i2c_add_driver(&act8945a_i2c_driver); +} +subsys_initcall(act8945a_i2c_init); + +static void __exit act8945a_i2c_exit(void) +{ + i2c_del_driver(&act8945a_i2c_driver); +} +module_exit(act8945a_i2c_exit); + +MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver"); +MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/act8945a.h b/include/linux/mfd/act8945a.h new file mode 100644 index 0000000..5f67009 --- /dev/null +++ b/include/linux/mfd/act8945a.h @@ -0,0 +1,21 @@ +/* + * MFD driver for Active-semi ACT8945a PMIC + * + * Copyright (C) 2015 Atmel Corporation. + * + * Author: Wenyou Yang <wenyou.yang@atmel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef _LINUX_MFD_ACT8945A_H +#define _LINUX_MFD_ACT8945A_H + +struct act8945a_dev { + struct regmap *regmap; +}; + +#endif -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v5 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver 2016-01-14 5:04 ` [PATCH v5 1/2] " Wenyou Yang @ 2016-01-14 13:35 ` Peter Korsgaard 2016-01-15 1:16 ` Yang, Wenyou 0 siblings, 1 reply; 11+ messages in thread From: Peter Korsgaard @ 2016-01-14 13:35 UTC (permalink / raw) To: Wenyou Yang Cc: Lee Jones, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, devicetree, Krzysztof Kozlowski, Nicolas Ferre, linux-kernel, Javier Martinez Canillas, linux-arm-kernel >>>>> "Wenyou" == Wenyou Yang <wenyou.yang@atmel.com> writes: > This patch adds support for the Active-semi ACT8945A PMIC. > It is a Multi Function Device with the following subdevices: > - Regulator > - Charger > It is interfaced to the host controller using I2C interface, > ACT8945A is a child device of the I2C. > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > --- > Changes in v5: > - change depends on to 'I2C=y'. Why not make it a tristate instead? Having regulators as modules is perhaps not a very wise thing to do, but conceptually I don't see why this code couldn't be a module. > +config MFD_ACT8945A > + bool "Active-semi ACT8945A" > + select MFD_CORE > + select REGMAP_I2C > + depends on I2C=y && OF > + help > + Support for the ACT8945A PMIC from Active-semi. This device > + features three step-down DC/DC converters and four low-dropout > + linear regulators, along with a complete ActivePath battery > + charger. > + [snip] > +++ b/drivers/mfd/act8945a.c > @@ -0,0 +1,109 @@ > +/* > + * MFD driver for Active-semi ACT8945a PMIC > + * > + * Copyright (C) 2015 Atmel Corporation. > + * > + * Author: Wenyou Yang <wenyou.yang@atmel.com> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License as published by the > + * Free Software Foundation; either version 2 of the License, or (at your > + * option) any later version. > + */ > + > +#include <linux/i2c.h> > +#include <linux/mfd/act8945a.h> > +#include <linux/mfd/core.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <linux/regmap.h> > + > +static const struct mfd_cell act8945a_devs[] = { > + { > + .name = "act8945a-pmic", > + .of_compatible = "active-semi,act8945a-regulator", > + }, > + { > + .name = "act8945a-charger", > + .of_compatible = "active-semi,act8945a-charger", > + }, > +}; > + > +static const struct regmap_config act8945a_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > +}; > + > +static int act8945a_i2c_probe(struct i2c_client *i2c, > + const struct i2c_device_id *id) > +{ > + struct act8945a_dev *act8945a; > + int ret; > + > + act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL); > + if (!act8945a) > + return -ENOMEM; > + What is the point of this structure (and the header file)? Can't the subdevices just do dev_get_regmap(dev->parent)? regulator_register() afaik already does this by default. -- Bye, Peter Korsgaard ^ permalink raw reply [flat|nested] 11+ messages in thread
* RE: [PATCH v5 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver 2016-01-14 13:35 ` Peter Korsgaard @ 2016-01-15 1:16 ` Yang, Wenyou 2016-01-15 7:58 ` Peter Korsgaard 0 siblings, 1 reply; 11+ messages in thread From: Yang, Wenyou @ 2016-01-15 1:16 UTC (permalink / raw) To: Peter Korsgaard Cc: Lee Jones, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, devicetree, Krzysztof Kozlowski, Ferre, Nicolas, linux-kernel, Javier Martinez Canillas, linux-arm-kernel Hi Peter, > -----Original Message----- > From: Peter Korsgaard [mailto:jacmet@gmail.com] On Behalf Of Peter Korsgaard > Sent: 2016年1月14日 21:35 > To: Yang, Wenyou <Wenyou.Yang@atmel.com> > Cc: Lee Jones <lee.jones@linaro.org>; Rob Herring <robh+dt@kernel.org>; > Pawel Moll <pawel.moll@arm.com>; Mark Rutland <mark.rutland@arm.com>; Ian > Campbell <ijc+devicetree@hellion.org.uk>; Kumar Gala <galak@codeaurora.org>; > devicetree@vger.kernel.org; Krzysztof Kozlowski <k.kozlowski@samsung.com>; > Ferre, Nicolas <Nicolas.FERRE@atmel.com>; linux-kernel@vger.kernel.org; > Javier Martinez Canillas <javier@dowhile0.org>; linux-arm- > kernel@lists.infradead.org > Subject: Re: [PATCH v5 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC > MFD driver > > >>>>> "Wenyou" == Wenyou Yang <wenyou.yang@atmel.com> writes: > > > This patch adds support for the Active-semi ACT8945A PMIC. > > It is a Multi Function Device with the following subdevices: > > - Regulator > > - Charger > > > It is interfaced to the host controller using I2C interface, > ACT8945A is a child > device of the I2C. > > > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> > Reviewed-by: > Krzysztof Kozlowski <k.kozlowski@samsung.com> > --- > > > Changes in v5: > > - change depends on to 'I2C=y'. > > Why not make it a tristate instead? Having regulators as modules is perhaps not a > very wise thing to do, but conceptually I don't see why this code couldn't be a > module. Yes, you are right. it can be use a tristate. > > > +config MFD_ACT8945A > > + bool "Active-semi ACT8945A" > > + select MFD_CORE > > + select REGMAP_I2C > > + depends on I2C=y && OF > > + help > > + Support for the ACT8945A PMIC from Active-semi. This device > > + features three step-down DC/DC converters and four low-dropout > > + linear regulators, along with a complete ActivePath battery > > + charger. > > + > > [snip] > > > +++ b/drivers/mfd/act8945a.c > > @@ -0,0 +1,109 @@ > > +/* > > + * MFD driver for Active-semi ACT8945a PMIC > + * > + * Copyright (C) > 2015 Atmel Corporation. > > + * > > + * Author: Wenyou Yang <wenyou.yang@atmel.com> > + * > + * This > program is free software; you can redistribute it and/or modify it > + * under the > terms of the GNU General Public License as published by the > + * Free > Software Foundation; either version 2 of the License, or (at your > + * option) any > later version. > > + */ > > + > > +#include <linux/i2c.h> > > +#include <linux/mfd/act8945a.h> > > +#include <linux/mfd/core.h> > > +#include <linux/module.h> > > +#include <linux/of_device.h> > > +#include <linux/regmap.h> > > + > > +static const struct mfd_cell act8945a_devs[] = { > > + { > > + .name = "act8945a-pmic", > > + .of_compatible = "active-semi,act8945a-regulator", > > + }, > > + { > > + .name = "act8945a-charger", > > + .of_compatible = "active-semi,act8945a-charger", > > + }, > > +}; > > + > > +static const struct regmap_config act8945a_regmap_config = { > > + .reg_bits = 8, > > + .val_bits = 8, > > +}; > > + > > +static int act8945a_i2c_probe(struct i2c_client *i2c, > > + const struct i2c_device_id *id) > > +{ > > + struct act8945a_dev *act8945a; > > + int ret; > > + > > + act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL); > > + if (!act8945a) > > + return -ENOMEM; > > + > > What is the point of this structure (and the header file)? Can't the subdevices just > do dev_get_regmap(dev->parent)? regulator_register() afaik already does this by > default. Yes, I re-read regulator_register() code. It did do dev_get_regmap(dev->parent). I think this structure should be pointed by dev->parent, this structure is necessary. Yes regulator driver should be simpler. Moreover, it is used by another sub device, charger. Which don't such code. > > -- > Bye, Peter Korsgaard Best Regards, Wenyou Yang ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v5 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver 2016-01-15 1:16 ` Yang, Wenyou @ 2016-01-15 7:58 ` Peter Korsgaard 2016-01-15 8:38 ` Yang, Wenyou 2016-01-20 7:26 ` Yang, Wenyou 0 siblings, 2 replies; 11+ messages in thread From: Peter Korsgaard @ 2016-01-15 7:58 UTC (permalink / raw) To: Yang, Wenyou Cc: Lee Jones, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, devicetree, Krzysztof Kozlowski, Ferre, Nicolas, linux-kernel, Javier Martinez Canillas, linux-arm-kernel >>>>> "Yang," == Yang, Wenyou <Wenyou.Yang@atmel.com> writes: Hi, >> Why not make it a tristate instead? Having regulators as modules is perhaps not a >> very wise thing to do, but conceptually I don't see why this code couldn't be a >> module. > Yes, you are right. it can be use a tristate. Ok, good. >> > + act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL); >> > + if (!act8945a) >> > + return -ENOMEM; >> > + >> >> What is the point of this structure (and the header file)? Can't the subdevices just >> do dev_get_regmap(dev->parent)? regulator_register() afaik already does this by >> default. > Yes, I re-read regulator_register() code. It did do dev_get_regmap(dev->parent). > I think this structure should be pointed by dev->parent, this structure is necessary. > Yes regulator driver should be simpler. > Moreover, it is used by another sub device, charger. Which don't such code. But the charger driver can just as well do: dev_get_regmap(dev->parent); instead of: dev_get_drvdata(pdev->dev.parent)->regmap. -- Venlig hilsen, Peter Korsgaard ^ permalink raw reply [flat|nested] 11+ messages in thread
* RE: [PATCH v5 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver 2016-01-15 7:58 ` Peter Korsgaard @ 2016-01-15 8:38 ` Yang, Wenyou 2016-01-20 7:26 ` Yang, Wenyou 1 sibling, 0 replies; 11+ messages in thread From: Yang, Wenyou @ 2016-01-15 8:38 UTC (permalink / raw) To: Peter Korsgaard Cc: Lee Jones, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, devicetree, Krzysztof Kozlowski, Ferre, Nicolas, linux-kernel, Javier Martinez Canillas, linux-arm-kernel Hi Peter, > -----Original Message----- > From: Peter Korsgaard [mailto:jacmet@gmail.com] On Behalf Of Peter Korsgaard > Sent: 2016年1月15日 15:58 > To: Yang, Wenyou <Wenyou.Yang@atmel.com> > Cc: Lee Jones <lee.jones@linaro.org>; Rob Herring <robh+dt@kernel.org>; > Pawel Moll <pawel.moll@arm.com>; Mark Rutland <mark.rutland@arm.com>; Ian > Campbell <ijc+devicetree@hellion.org.uk>; Kumar Gala <galak@codeaurora.org>; > devicetree@vger.kernel.org; Krzysztof Kozlowski <k.kozlowski@samsung.com>; > Ferre, Nicolas <Nicolas.FERRE@atmel.com>; linux-kernel@vger.kernel.org; > Javier Martinez Canillas <javier@dowhile0.org>; linux-arm- > kernel@lists.infradead.org > Subject: Re: [PATCH v5 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC > MFD driver > > >>>>> "Yang," == Yang, Wenyou <Wenyou.Yang@atmel.com> writes: > > Hi, > > >> Why not make it a tristate instead? Having regulators as modules is perhaps > not a >> very wise thing to do, but conceptually I don't see why this code couldn't > be a >> module. > > > Yes, you are right. it can be use a tristate. > > Ok, good. > > >> > + act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), > >> > +GFP_KERNEL); > >> > + if (!act8945a) > >> > + return -ENOMEM; > >> > + > >> > >> What is the point of this structure (and the header file)? Can't the subdevices > just >> do dev_get_regmap(dev->parent)? regulator_register() afaik already does > this by >> default. > > > Yes, I re-read regulator_register() code. It did do dev_get_regmap(dev- > >parent). > > > I think this structure should be pointed by dev->parent, this structure is > necessary. > > > Yes regulator driver should be simpler. > > > Moreover, it is used by another sub device, charger. Which don't such code. > > But the charger driver can just as well do: > > dev_get_regmap(dev->parent); > > instead of: > > dev_get_drvdata(pdev->dev.parent)->regmap. Understand. Thank you! Best Regards, Wenyou Yang ^ permalink raw reply [flat|nested] 11+ messages in thread
* RE: [PATCH v5 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver 2016-01-15 7:58 ` Peter Korsgaard 2016-01-15 8:38 ` Yang, Wenyou @ 2016-01-20 7:26 ` Yang, Wenyou 2016-01-20 7:40 ` Peter Korsgaard 1 sibling, 1 reply; 11+ messages in thread From: Yang, Wenyou @ 2016-01-20 7:26 UTC (permalink / raw) To: Peter Korsgaard Cc: Lee Jones, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, devicetree, Krzysztof Kozlowski, Ferre, Nicolas, linux-kernel, Javier Martinez Canillas, linux-arm-kernel Hi Peter, > -----Original Message----- > From: Peter Korsgaard [mailto:jacmet@gmail.com] On Behalf Of Peter Korsgaard > Sent: 2016年1月15日 15:58 > To: Yang, Wenyou <Wenyou.Yang@atmel.com> > Cc: Lee Jones <lee.jones@linaro.org>; Rob Herring <robh+dt@kernel.org>; > Pawel Moll <pawel.moll@arm.com>; Mark Rutland <mark.rutland@arm.com>; Ian > Campbell <ijc+devicetree@hellion.org.uk>; Kumar Gala <galak@codeaurora.org>; > devicetree@vger.kernel.org; Krzysztof Kozlowski <k.kozlowski@samsung.com>; > Ferre, Nicolas <Nicolas.FERRE@atmel.com>; linux-kernel@vger.kernel.org; > Javier Martinez Canillas <javier@dowhile0.org>; linux-arm- > kernel@lists.infradead.org > Subject: Re: [PATCH v5 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC > MFD driver > > >>>>> "Yang," == Yang, Wenyou <Wenyou.Yang@atmel.com> writes: > > Hi, > > >> Why not make it a tristate instead? Having regulators as modules is perhaps > not a >> very wise thing to do, but conceptually I don't see why this code couldn't > be a >> module. > > > Yes, you are right. it can be use a tristate. > > Ok, good. > > >> > + act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), > >> > +GFP_KERNEL); > >> > + if (!act8945a) > >> > + return -ENOMEM; > >> > + > >> > >> What is the point of this structure (and the header file)? Can't the subdevices > just >> do dev_get_regmap(dev->parent)? regulator_register() afaik already does > this by >> default. > > > Yes, I re-read regulator_register() code. It did do dev_get_regmap(dev- > >parent). > > > I think this structure should be pointed by dev->parent, this structure is > necessary. > > > Yes regulator driver should be simpler. > > > Moreover, it is used by another sub device, charger. Which don't such code. > > But the charger driver can just as well do: > > dev_get_regmap(dev->parent); > > instead of: > > dev_get_drvdata(pdev->dev.parent)->regmap. For regulator, it works use the core do dev_get_regmap(dev->parent), but for charger, it need to export *act8945a. Best Regards, Wenyou Yang ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v5 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver 2016-01-20 7:26 ` Yang, Wenyou @ 2016-01-20 7:40 ` Peter Korsgaard 2016-01-20 7:50 ` Yang, Wenyou 0 siblings, 1 reply; 11+ messages in thread From: Peter Korsgaard @ 2016-01-20 7:40 UTC (permalink / raw) To: Yang, Wenyou Cc: Lee Jones, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, devicetree, Krzysztof Kozlowski, Ferre, Nicolas, linux-kernel, Javier Martinez Canillas, linux-arm-kernel >>>>> "Yang," == Yang, Wenyou <Wenyou.Yang@atmel.com> writes: Hi, >> But the charger driver can just as well do: >> >> dev_get_regmap(dev->parent); >> >> instead of: >> >> dev_get_drvdata(pdev->dev.parent)->regmap. > For regulator, it works use the core do dev_get_regmap(dev->parent), > but for charger, it need to export *act8945a. Why? Just like the regulator core does, your battery driver can do: dev_get_regmap(dev->parent); -- Venlig hilsen, Peter Korsgaard ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v5 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver 2016-01-20 7:40 ` Peter Korsgaard @ 2016-01-20 7:50 ` Yang, Wenyou 2016-01-20 7:53 ` Krzysztof Kozlowski 0 siblings, 1 reply; 11+ messages in thread From: Yang, Wenyou @ 2016-01-20 7:50 UTC (permalink / raw) To: Peter Korsgaard Cc: Lee Jones, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, devicetree, Krzysztof Kozlowski, Ferre, Nicolas, linux-kernel, Javier Martinez Canillas, linux-arm-kernel Hi Peter, On 2016/1/20 15:40, Peter Korsgaard wrote: >>>>>> "Yang," == Yang, Wenyou <Wenyou.Yang@atmel.com> writes: > Hi, > >>> But the charger driver can just as well do: > >> > >> dev_get_regmap(dev->parent); > >> > >> instead of: > >> > >> dev_get_drvdata(pdev->dev.parent)->regmap. > > > For regulator, it works use the core do dev_get_regmap(dev->parent), > > but for charger, it need to export *act8945a. > > Why? There is a callback (*get_property)(...), who will read the charger register via regmap, but it doesn't provide the argument for regmap. include/linux/power_supply.h struct power_supply_desc { [ ... ] int (*get_property)(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val); [ ... ] } > > Just like the regulator core does, your battery driver can do: > > dev_get_regmap(dev->parent); > Best Regards, Wenyou Yang ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v5 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver 2016-01-20 7:50 ` Yang, Wenyou @ 2016-01-20 7:53 ` Krzysztof Kozlowski 0 siblings, 0 replies; 11+ messages in thread From: Krzysztof Kozlowski @ 2016-01-20 7:53 UTC (permalink / raw) To: Yang, Wenyou, Peter Korsgaard Cc: Lee Jones, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, devicetree, Ferre, Nicolas, linux-kernel, Javier Martinez Canillas, linux-arm-kernel On 20.01.2016 16:50, Yang, Wenyou wrote: > Hi Peter, > > On 2016/1/20 15:40, Peter Korsgaard wrote: >>>>>>> "Yang," == Yang, Wenyou <Wenyou.Yang@atmel.com> writes: >> Hi, >> >>>> But the charger driver can just as well do: >> >> >> >> dev_get_regmap(dev->parent); >> >> >> >> instead of: >> >> >> >> dev_get_drvdata(pdev->dev.parent)->regmap. >> >> > For regulator, it works use the core do dev_get_regmap(dev->parent), >> > but for charger, it need to export *act8945a. >> >> Why? > > There is a callback (*get_property)(...), who will read the charger > register via regmap, > > but it doesn't provide the argument for regmap. > > include/linux/power_supply.h > > struct power_supply_desc { > [ ... ] > int (*get_property)(struct power_supply *psy, > enum power_supply_property psp, > union power_supply_propval *val); > [ ... ] > > } > >> >> Just like the regulator core does, your battery driver can do: >> >> dev_get_regmap(dev->parent); >> Why can't you store the pointer to regmap as power supply driver data? There is really no need for the structure containing only one pointer. BR, Krzysztof ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v5 2/2] mfd: add documentation for ACT8945A DT bindings 2016-01-14 5:04 [PATCH v5 0/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver Wenyou Yang 2016-01-14 5:04 ` [PATCH v5 1/2] " Wenyou Yang @ 2016-01-14 5:04 ` Wenyou Yang 1 sibling, 0 replies; 11+ messages in thread From: Wenyou Yang @ 2016-01-14 5:04 UTC (permalink / raw) To: Lee Jones, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala Cc: Javier Martinez Canillas, Krzysztof Kozlowski, Nicolas Ferre, linux-arm-kernel, linux-kernel, devicetree, Wenyou Yang The Active-semi ACT8945A PMIC is a Multi-Function Device, it has two subdevices: - Regulator - Charger This patch adds documentation for ACT8945A DT bindings. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Rob Herring <robh@kernel.org> --- Changes in v5: None Changes in v4: None Changes in v3: - fix the tabbing errors in Example. - use "pmic@5b" label, not "act8945a@5b" in Example. - collect Acked-by from Rob. Changes in v2: - use more specific label in Example. - add pmic and charger nodes in Example. Documentation/devicetree/bindings/mfd/act8945a.txt | 82 ++++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/act8945a.txt diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt new file mode 100644 index 0000000..f645344 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/act8945a.txt @@ -0,0 +1,82 @@ +Device-Tree bindings for Active-semi ACT8945A MFD driver + +Required properties: + - compatible: "active-semi,act8945a". + - reg: the I2C slave address for the ACT8945A chip + +The chip exposes two subdevices: + - a regulators: see ../regulator/act8945a-regulator.txt + - a charger: see ../power/act8945a-charger.txt + +Example: + pmic@5b { + compatible = "active-semi,act8945a"; + reg = <0x5b>; + status = "okay"; + + pmic { + compatible = "active-semi,act8945a-regulator"; + active-semi,vsel-high; + + regulators { + vdd_1v35_reg: DCDC_REG1 { + regulator-name = "VDD_1V35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + vdd_1v2_reg: DCDC_REG2 { + regulator-name = "VDD_1V2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + vdd_3v3_reg: DCDC_REG3 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_fuse_reg: LDO_REG1 { + regulator-name = "VDD_FUSE"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vdd_3v3_lp_reg: LDO_REG2 { + regulator-name = "VDD_3V3_LP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_led_reg: LDO_REG3 { + regulator-name = "VDD_LED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_sdhc_1v8_reg: LDO_REG4 { + regulator-name = "VDD_SDHC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; + + charger { + compatible = "active-semi,act8945a-charger"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_charger_chglev>; + active-semi,chglev-gpio = <&pioA 12 GPIO_ACTIVE_HIGH>; + active-semi,input_voltage_threshold = <6600>; + active-semi,precondition_timeout = <40>; + active-semi,total_timeout = <3>; + }; + }; -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 11+ messages in thread
end of thread, other threads:[~2016-01-20 7:53 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-01-14 5:04 [PATCH v5 0/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver Wenyou Yang 2016-01-14 5:04 ` [PATCH v5 1/2] " Wenyou Yang 2016-01-14 13:35 ` Peter Korsgaard 2016-01-15 1:16 ` Yang, Wenyou 2016-01-15 7:58 ` Peter Korsgaard 2016-01-15 8:38 ` Yang, Wenyou 2016-01-20 7:26 ` Yang, Wenyou 2016-01-20 7:40 ` Peter Korsgaard 2016-01-20 7:50 ` Yang, Wenyou 2016-01-20 7:53 ` Krzysztof Kozlowski 2016-01-14 5:04 ` [PATCH v5 2/2] mfd: add documentation for ACT8945A DT bindings Wenyou Yang
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).