* staging/dt3155: Question about dt3155_init_isr
@ 2010-03-01 23:19 H Hartley Sweeten
0 siblings, 0 replies; only message in thread
From: H Hartley Sweeten @ 2010-03-01 23:19 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg KH, ss
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 803 bytes --]
Hello all,
In dt3155_drv.c the function dt3155_init_isr() sets up the card for
interrupt generation. About half way thru the function is the following:
/* 50/60 Hz should be set before this point but let's make sure it is */
/* right anyway */
ReadI2C(dt3155_lbase[ minor ], CONFIG, &i2c_csr2.reg);
i2c_csr2.fld.HZ50 = FORMAT50HZ;
WriteI2C(dt3155_lbase[ minor ], CONFIG, i2c_config.reg);
Based on the register definitions in dt3155_io.h shouldn't this actually
be:
ReadI2C(dt3155_lbase[ minor ], CSR2, &i2c_csr2.reg);
i2c_csr2.fld.HZ50 = FORMAT50HZ;
WriteI2C(dt3155_lbase[ minor ], CSR2, i2c_csr2.reg);
Regards,
Hartley
ÿôèº{.nÇ+·®+%Ëÿ±éݶ\x17¥wÿº{.nÇ+·¥{±þG«éÿ{ayº\x1dÊÚë,j\a¢f£¢·hïêÿêçz_è®\x03(éÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?¨èÚ&£ø§~á¶iOæ¬z·vØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?I¥
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-03-01 23:19 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-03-01 23:19 staging/dt3155: Question about dt3155_init_isr H Hartley Sweeten
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).